CMake's moc file scanning is rather primitive: It will run moc on any
file containing a line that starts with Q_OBJECT (and similar macros).
We have four files in QtBase that contain such a macro at the start
of the line in a qdoc comment. These four files were excluded from
automatic moc handling by cmake, which is not ideal, since this will
silently fail when somebody actually adds a Q_OBJECT macro in code.
This patch introduces a macro Q_OBJECT for qdoc. This macro will be
replaced with Q_OBJECT in the generated documentation. While not nice,
at least a failure to use \Q_OBJECT is noticeable: Moc will warn about
the file.
Change-Id: I829893c1166eee306fe30058d4ea0256affd45ea
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
This is less self-contained than what we have, but significantly speeds
up cmake configure/generate runs.
This patch also warns when a feature is already defined.
Change-Id: I8cab63e208ba98756b47d362a39b462f5ec55e20
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This simplifies the handling of features a bit as it removes the special
code to store two sets of features in Qt::Core.
Change-Id: I536d41cfc76a02af054e3cfbad6bda50b1e9e49a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* Only import features once
* Move Core specific code into its CMakeLists.txt file
* More consistently use target names like "Core" to
refer to "Qt modules". We tend to require either "Core"
or "QtCore" in places, which I find confusing.
Change-Id: Id54161bc5468412750cb9eb7eeb15de3812e8a09
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
... and fix the fallout of this change. It results in more targets being
passed overall (instead of a strange mix of targets and module names),
so this is a good thing(TM).
Change-Id: I1c4326b80e2c6675356587879ec8471ef7249a50
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
CMake comes with a Find module for this, so use it in src/corelib/configure.cmake
Change-Id: I8f4abcb32fb10513d67c3c959310eefaf7b56d3d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add FindSlog2 and use it in src/corelib/configure.cmake.
Change-Id: I7e6a696a49df568a41ed1224228ab608db2dbb0e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Improve conditions/enable/disable conditions for iconv related features.
These are detected a bit different from what qmake does, so adapt to that.
Change-Id: I7b3e4baf05dc324507f370d7f651a62f29e42a98
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Find the PPS library and use the result PPS_FOUND in configure.cmake where
needed.
Change-Id: I08d3ace421278dc0ae5c3128d4234e6bca906c05
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
cmake have not built printsupport yet.
Change-Id: I635b4678bbf0b659750e7f6b842834e084b6f3a5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Change-Id: I9bf7d61a65950eafcfe6b3ea9c437e353ff7b2ed
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Store QT_FEATUREs that are not emitted, but do not show them in the UI. Also separate
out the UI (FEATURE_foo) from the internal CMake value (QT_FEATURE_foo). This does
break the overriding of settings, but that did not work well before either. This
will be fixed in follow-up patches.
Remove fallout: xkbcommon_system was now evaluated where it was not before. Remove
it as that is always the case now.
Change-Id: I2d303827a1cc9afeef93ad73285a2043ddaa9766
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QTimer contains a template member function callOnTimeout(), which accepts
a variable number of arguments. Because it is difficult to document such
a general function, several specific declarations were added under the
guard Q_CLANG_QDOC that represent the typical ways this function is used.
They are easier to document because they have specific signatures.
Unfortunately, the clang parser recognizes two of them as being the same,
so this change removes one of the two. It also adjusts the documentation
of the remaining one so that it indicates both uses.
Change-Id: Ifa7bed9093bd1491b7bfe154990864454885c003
Reviewed-by: Martin Smith <martin.smith@qt.io>
This change simplifies memory management as long as it doesn't requires
manuall calls to qDeleteAll and manual deleting/nulling pointers.
Change-Id: Id0dc563d0b1e74ae33939d90d4b39999020cd7ce
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
POSIX specifies that tzset() consults environment variable TZ and
modifies some globals; it also specifies mktime(), localtime() and
strftime() to behave as if they called tzset(). Fortunately, we only
call strftime() from a test and only call localtime() when not
threaded. Provide wrappers for tzset() and mktime() that share the
lock used by our environment-access code, to prevent races on the
environment (and tzset()'s globals) when we call them.
In the process, re-use tst_QDateTime's TimeZoneRollback in its older
test systemTimeZoneChange() and presume that this can now be tested
cross-platform, since TimeZoneRollback is used in another test where
this works.
Fixes: QTBUG-71030
Change-Id: I79f559b8857ea2803e73501008bf0d7158c6731f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWidget::isEnabledToTLW() and QApplication::setKeypadNavigationEnabled()
are deprecated for a long time but not marked as deprecated. Therefore
add QT_DEPRECATED and guard them with QT_DEPRECATED_SINCE(5, 13).
Change-Id: I12a76597aaad71025e4b7ad251dd67be55f8f966
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Mark some long deprecated functions as deprecated so they can be removed
with Qt6.
Change-Id: I2ccd21c829c954b6a3662799070682dbe71fd693
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
This is not valid, but was confusing before and would be silently ignored,
warn instead.
Fixes: QTBUG-50583
Change-Id: If78c4a5ef96c76e1d5116a1bd24e5c289ff74cc4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The hue parameter in hsl/hsv was treated the same way as a the other
parameters although it's range is from 0-359 and not from 0-255.
Fix it by extending the maximum range for the first parameter when
parsing a color value given in hsv or hsl.
[ChangeLog][QtGui][CSS] Fix the range of the hue parameter when parsing
a color given in hsl or hsv
Fixes: QTBUG-70897
Change-Id: I9ffa65a89c0abcca62bae35777ca1cbde3375180
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The Qt stylesheets color property did not support hsl or hsla although
CSS 2.1 does support it. Since QColor natively supports this color model
only the color parsing needed to be adjusted.
This also adds some stricter checks for a valid css color definition and
prints a warning about the issue.
[ChangeLog][QtGui][CSS] Added support for hsl/hsla colors
Fixes: QTBUG-58804
Change-Id: Ief65a36a7e0ed0d705dc1fe5a8658e8d07fe9a13
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Only QGuiApplication would emit the signal. Untangling the duplicate
code is rather non-trivial, so left alone for now.
Fixes: QTBUG-71186
Change-Id: I4021e3b9ff39718562f4fa3a03c092436b559e9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
A few member functions of QCborValue and QCborValueRef were given special
declarations for qdoc to see so that they could be documented as a single
function, but because clang is now used to parse c++, the special declarations
caused parsing errors.
The declarations for qdoc are removed in this update, but the functions are
still documented with a single comment by grouping the \fn commands for the
similar functions together in the single comment.
Change-Id: If97ee2f2bfcd045d2259a4375b31b8884eeb1072
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Martin Smith <martin.smith@qt.io>
Use unique_ptr instead of plain array. No need to call 'delete'.
Change-Id: Ia77f4f209b1fd83391428d8b82b7acbba48781b9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This doesn't add any value and just complicates things.
Change-Id: I3a011174e330f212eda99371d2806517ceec45d7
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's needed to generate a pkcs12/pfx bundle from our
certificate chains which are then imported into a certificate
store in Schannel and then passed to various Schannel API.
Change-Id: Idb88f42f2aa15eb91c52404ee6c57bf43e983379
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
toolBarArea took non-const even though const would have been enough.
In the public API do this for Qt 6.
Fixes: QTBUG-45953
Change-Id: Ic99f4dd5a7f344d49d046e3b084b68120f8de3c0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
These inclusions are necessary when compiling without pre-compiled headers.
Change-Id: I4345ad3f6882046e4b8f2ba9d315299e280c9f18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the scroll mode is ScrollPerItem and uniformRowHeights is not set,
the offset has to be calculated by iterating over all items.
Optimize the loop by calculating the last item before the loop instead
of checking at every iteration.
Task-number: QTBUG-61763
Change-Id: I1d4439fe0fc3f32194f5f368c0486e793048d965
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
When painting the background for a QAbstractScrollArea, the brushOrigin
was calculated for every brush type although it was not needed. Since
this can be very time consuming (e.g for a QTreeView with non-uniform
row sizes) it should be avoided when possible.
Therefore check if the brush is a texture and skip the calculation if
it is not the case. Also do not restore the old brushOrigin since the
painter is not used at all afterwards.
Task-number: QTBUG-61763
Change-Id: I66cbe1b796cb5cad4c78e656fb86d199d8e4bde9
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QWinRTBackingStore::flush() was not considering the possibility
that the supplied region may fall partially outside the bounds
of the paint device. This resulted in possible accesses to invalid
memory addresses, causing a crash. This bug was exposed by an update
in ANGLE that was causing a crash when running tst_QTableView::bigMode
with a small screen size. With this fix the function will use the
intersection of the supplied region with the paint device bounds.
Change-Id: I2f0f0f7f5510688bfa1459320a0c146df6be65d1
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
This reverts 4fe68ffbe5,
1dfc16f6da and
9545bee98a2431d4ef4c3449631a5fcb8d9bd57a; this feature has not been in
use for some time, so is just dead code.
[ChangeLog][QtTestLib] Removed support for GPU_BLACKLIST files.
Reimplementations or equivalents of QTEST_MAIN() should remove their
uses of QTEST_ADD_GPU_BLACKLIST_SUPPORT and its _DEFS; they are still
vacuously defined, but serve no remaining purpose and shall be
undefined in due course.
Change-Id: I94ffd5c37ce4e1f7cf25d3c7ae8d40696b74c911
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This reverts commit 341bfcd1ea.
As it turns out there might be use cases where we want to have proper
windowing system event integration with glib dispatcher via g_source_attach().
For example with gtk_dialog_run, where GTK blocks in a recursive main loop.
We want to continue dispatcing our windowing system events during this nested
event loop. Not having a proper glib integration can result in rendering issues,
e.g. when resizing parent window via mouse while GTK-based dialog is shown. Can
be seen on examples/widgets/richtext/textedit/ -> Format (from menu) -> "Color..."
The issue from 341bfcd1ea actually should be fixed inside XCB platform plugin,
by improving integration with event dispatcher. That is handled in follow-up patches.
Change-Id: Icabc6d841a554aefbdd460765a3165d22e65f651
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
xcb_poll_for_queued_event() was introduced in libxcb 1.8.
The minimal required libxcb version was bumped up to 1.9 in
1f5d791708. Before this version
bump we needed the runtime check to support older versions
of libxcb.
Updated connections in the event reader to use the new signal
and slot syntax. Removed threadedEventHandling() method because
now it is always 'true'.
Change-Id: I0bce61fd478a871d35e676239ee5280c4f40be8a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We had this information internally but there was no public API for it
Fixes: QTBUG-4071
Change-Id: Ic7f855e32a6870129e7723a47d31a629e0ea1aca
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This is an opt-in feature to control whether font and palette should
be propagated, and there is no reason this should be removed in Qt 6.
This has been introduced in commit
7293200ace .
Change-Id: I666c09d716bf7033953e98108da3f7711f3bc321
Reviewed-by: Samuel Nevala <samuel.nevala@intopalo.com>
Reviewed-by: Martin Koller <kollix@aon.at>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
A few places we didn't check if detach() succeeded including
in reinterpretAsFormat(), where it can be undone.
Task-number: QTBUG-70785
Change-Id: Ibcc8e26e2961f6288eb7a045ae1cb28e59213a49
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QWidgetTextControl is a base class for controls of text widgets
and widget-specific code should be used in derived classes, so
override loadResource() in QTextEditControl.
Change-Id: I6d829ead0837419530094d19e0ca53a964413e92
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
and fix handling of incoming binary data
Change-Id: I31e97505ad4ff64cf8e380df5d0d6b70c3cd60b0
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Two cases with no code between them don't need a fall-through marker.
The only code in the first case is subject to #if-ery; it either
returns, without falling through, or has no code there. Putting in an
overt Q_FALLTHROUGH() confused a rather dumb compiler ...
Change-Id: Icc034be08859cc1656401af1c62367aec302668b
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This reverts commit 4bdd8d4eca.
It contains an error.
Change-Id: I51052029f001b9e82c2a53de15b4ba354aafdbae
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
These functions have not been used by the font selection algorithm
in Qt 5. Calling lastResortFamily() always gave you "helvetica"
and lastResortFont() would actually crash.
Since we cannot remove them before Qt 6, we deprecate them for now
and update the documentation to give a more accurate description
of how the font matching works in Qt 5.
Note that in the non-native QFontDialog, it tries to implement its
own font matching algorithm and therefore was calling
lastResortFamily(). Since fixing QFontDialog is not within the
scope of this patch, I have just replaced the call by "helvetica"
directly, so that it will continue to behave the same.
[ChangeLog][QtGui][Text] Deprecated QFont::lastResortFamily()
and QFont::lastResortFont() which are not in use in Qt 5 and
did not provide any useful information.
Task-number: QTBUG-60813
Change-Id: Id8fe7bfdd427292ef86bc8405de03cb466b9b62a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adding standard behavior for text selection, when user want to select text
and there isn't any previous line then selection will end on start
[ChangeLog][QtWidgets][QWidgetTextControlPrivate] Move cursor selection to start
Task-number: QTBUG-69735
Change-Id: If222d37747772f60774f671ffdd273d63cdaf571
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QList, QVector and QVarLengthArray check the validity of iterators
passed to member functions using isValidIterator(), which checks that
the underlying pointers are in the range [begin, end]. This check is
well-defined when the outcome is positive, ie. when the iterator is
valid. But if the iterator is not valid, and does not happen to point
into [end, begin + capacity], the comparison, which uses normal
operator<, invokes UB.
Fix by using std::less<T*>, which defines a total ordering.
Change-Id: I1e5757789b4b9779f5e3e298e7f2b2dd0b27576c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The version we're using is at least seven years old.
Let's try staying up to date ...
Change-Id: I450a2fc37c22740fe554a81b471bf0fad340498e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use a template on the size of the char[], as suggested by Ville
Voutilainen. This resolves ambiguity about whether such look-ups
should be done via QString or QCborValue (not that it would have made
any difference).
When we come to add mutating indexing of QCborValue, chained
dereferences like map[i][j][k] need to stay in operator[] const
throughout, to avoid detaching intermediates to create references into
them due to using the mutating operator[] on the earlier dereference's
return. So const-qualify the QCborValue operator[] const variants at
the same time, to match those of QCborValue itself.
Change-Id: Ib1652ae9440fe3767a653afa2856b74040210e07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Likewise have mutating operator[] insert an invalid entry at its
target index, if beyond the end of the array. This makes it possible
to fill an array from high index to low, for example.
Change-Id: If71699c20e2623142214ce2c11c4d6e4a120c989
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds the missing overload for QRegularExpression to match the
QRegExp one for QPlainTextEdit.
[ChangeLog][QtWidgets][QPlainTextEdit] Added QRegularExpression find()
method overload.
Change-Id: Id156971d3fa0372712bfa8b72a55550942a767e0
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch adds the missing overload for QRegularExpression to match the
QRegExp one for QTextEdit.
[ChangeLog][QtWidgets][QTextEdit] Added QRegularExpression find() method
overload.
Change-Id: Ic7be224dcc59fc8d832daddd1999a713b7f04253
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
Applications with target SDK version lower then 28 running on a device
with version greater or equal to 28 will cause compatibility warnings,
so default to none when the extract_android_style value is set to
default.
Note that the new value "default" was introduced to allow this kind
of changes in the future, i.e., selecting the best solution based on
some simple heuristics. Adding a new value also keep compatibility and
allows the user to explicitly set a value when needed.
Task-number: QTBUG-69810
Change-Id: I68301716767870ce6de40e45742d9c5fc263ee25
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
For winrt we cannot rely on the fact, that QThread::current will be called
from the correct thread for the first time. The application's main entry
point creates a suspended thread and starts it right afterwards. At that
moment, other functionality (QLoggingRegistry for example) might have
called QThread::current, which set the wrong thread as the main thread. In
order to avoid this situation, the main thread is explicitly set in
QCoreApplication's constructor.
Task-number: QTBUG-66418
Change-Id: I8b6347357a80eb395ae758bd3d420adef0826751
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The height of a line edit depends on the height of its font,
which in turn depends on DPI. So use the DPI-scaled icon size
from a style instead of hard-coded values.
Task-number: QTBUG-65627
Change-Id: Ic1f5af61b0d6346cfbc828817c4a3a39296a41ba
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
There is no need to apply QMAKE_LFLAGS_NOUNDEF in a .pro file that loads
qt_module.prf or qt_plugin.prf, both of which do the same.
Change-Id: I1ec86cddb4d0991becc136f8bd50d6652c885a6b
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Make the code consistent with the DomProperty::write() method.
Task-number: QTBUG-70613
Change-Id: I622b4a019a4473823584de97304f8324f2cf0c6b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Check on the application state before requesting activation.
Fixes: QTBUG-70810
Change-Id: I550137dc00209b17f4b3c033287ceef1b871ff50
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The only use is for ::tr so use QCoreApplication::translate
Automatic is not used in dialog/ anyway so there's no translation to
reuse
Change-Id: I0c993e87f46384a0f09d83c9b5e96de5366f1eb9
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Normally, when deleting a widget, setVisible(false) calls -orderOut:
and then ~QCocoaWindow will call -release, as a result the window
will disappear from the screen and will be deallocated. But -orderOut:
has no effect on minimized/iconified window. As a result, a 'zombie'
window still can be seen on screen, while all Qt-thingies already
deleted/dead. The similar behavior can be reproduced with a native
NSWindow where we do not call -orderOut:/-close and only call -release.
To fix this - we call -close.
Task-number: QTBUG-70794
Change-Id: Iee8e1fc98018885f1f6e9628d966843d21ac7d38
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
qabstractitemmodeltester.cpp:223:31: internal compiler error: in expand_expr_real_1, at expr.c:9170
Change-Id: I098c1bdf706512c91c649205f4675de0ca374227
Reviewed-by: David Faure <david.faure@kdab.com>
This change applies to darwin. It adds each include path in the
QMAKE_DEFAULT_INCDIRS variable to the qdoc command line with the -I
flag for both the prepare and the generate phase. These include paths
provide access to the standard c++ and c headers, which clang needs
to see. This change should work on all platforms, but it increased
the qdoc warning count on the linuxsystem where it was tested, so
now it only applies to darwin.
Change-Id: I16e2e0d744e2cf68743dc12d39155dda2ece1536
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The documentation for key bindings was a little bit unclear for key
asterisk. Also sync the names of the left and right key was not
consistent (Left/RightArrow - Left/Right)
Change-Id: Icee0821880fcc3ebc2ade939cf80127ebf0976ad
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
In iOS, the system certificates cannot be accessed, so this function
will return an empty list for the default configuration.
Task-number: QTBUG-60407
Change-Id: I0d691a0dd5e6367594e71c7ebccfbdc866d4a3f0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QTable/QTreeView did not follow the documentation and returned
their needed size with scrollbars within viewportSizeHint().
Then sizeHint() also took the size of the scrollbars into account
when the policy was set to ScrollBarAlwaysOn.
This lead to different results when the widget was shown/hidden and/or
the scrollbar was visible or not.
Fix it by only adding the additional size when the scrollbars are
really visible. Also use header->isHidden() instead of isVisible() in
QTreeView the same way it is done in QTableView.
[ChangeLog][QtWidgets][QAbstractScrollArea] QTableView/QTreeView are
now reporting their viewportSizeHint() correctly taking into account
its scroll bars visibility and visibilityPolicy.
Task-number: QTBUG-69120
Change-Id: If50959a9f7429275e3e33122644c978fb64972ba
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Perform a @Nx image file lookup when loading pixmaps.
Make drawBackgroundImage() handle high-dpi pixmaps,
here the layout calculations needs to be in device-
independent pixels
Fixes: QTBUG-36825
Change-Id: I61e6f53c59f61f3bd88c34a036349e51e8c8ad92
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
When switching between different input sources, we have to update layouts.
Task-number: QTBUG-50865
Change-Id: I0c23c19b79a2102dcc533822b0f861c387582c6c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Previously some of the members would have random initial values. Also,
on updateKeyboard() if we don't find usable uchrData, we should just
reset keyboard_layout_format and keyboard_mode, rather than keep the
previous values.
Task-number: QTBUG-50865
Change-Id: I1297fa55bb1593dd549d0bc122713d5d98f7b1fc
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Usually we focus in when we receive a click or equivalent.
QGraphicsScene by default also transfers the focus when you start a
touch on a trackpad or similar. Most of the time this also generates a
synthetic mouse click, so people don't necessary notice. However, at
least on macOS you can configure this behavior. With focusOnTouch
switched off, QGraphicsScene behaves as one would expect on macOS.
Fixes: QTBUG-59442
Change-Id: Ib87112640eef6b77892ad2490d80eedd055e6dce
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Commit 710ff392d9 introduced this fallback code for the case where the
extension was empty. Let's make it happen only in that case, so that the
much more common case of "foo.png" doesn't go through
iconEngineFromSuffix twice, nor through QMimeDatabase (which has to load
and parse an XML file in order to determine preferredSuffix(),
unfortunately).
Found using heaptrack.
Change-Id: Iab6b71e1fa23916029c9e2ba25447a12d70f88a5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
A font property specified in the css was used while drawing the QMenu
action text but not within sizeFromContents() which results in a wrong
size of the menu rect used for drawing.
Fix it by mimic the rect calculation from
QMenuPrivate::updateActionRects().
Fixes: QTBUG-70648
Change-Id: I5cf4f8b679c69197437393965c0bc6326f1c6c3a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This patch enabled json1 support for sqlite3 by defining
SQLITE_ENABLE_JSON1
[ChangeLog][QtSql][SQLite] Enable the json1-extension for
the SQLite3 plugin
Task-number: QTBUG-63498
Change-Id: Iaf1069ff1396c573125a5a3f490c0df5df560468
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QAccessibleTable(Header)Cell::isValid() did not check if the view is
still valid as it is done in QAccessibleTable::isValid() which can lead
to a crash during destruction when e.g. operator<<(QAccessibleInterface)
is called.
Change-Id: I930bf4c22aa0aa6868f58a8e5d0dd1557f6b17af
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
That allows us to remove custom handling in QMetaType.
Change-Id: Ic09fb96e1a05c6897803811d70aebbc6ea6e4f2e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The matatype should not keep manually maintained list of stream
operators. The patch adds automatic detection for all builtin types
so load and save functions pick the right delegate automatically.
This change exposed some existing anomalies:
- char is enforced to be signed while it seems that just calling
the operator directly does not have that feature.
- [unsigned] long type is always upgraded to [unsigned] long long
- QCborSimpleType doesn't have the data stream operators while
metatype is able to stream it through casting
Change-Id: I51178d6acd97d0585a6089e30ddd6acb2a29af54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling update has a cost, and should only be done when the drawable
object changes size or location. Instead of calling update each time
makeCurrent is called, we listen for the appropriate notifications,
limiting the number of update calls significantly.
We still call update on the thread owning the QOpenGLContext, which
is not ideal, as [NSOpenGLContext update] should only be called on
the main thread, but in practice this works. Getting out of this
situation is tricky, and setView has in theory the same problems.
Until those problems have been solved we keep the behavior as is.
Task-number: QTBUG-63572
Change-Id: Ibac9f8be7843f2aa006af6f7ee670bf027122440
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When the font changes in NSFontPanel, it notifies NSFontManager via
-[NSFontManager modifyFontViaPanel:], which in turn sends the font
manager's action (by default changeFont:) to its target (nil, unless set).
Sending the action in -[NSApplication(NSResponder) sendAction:to:from:]
will sanitize the 'to' argument via _NSTargetForSendAction.
If the argument is non-nill (if we've set the NSFontManager target
explicitly), and we're running in an app-modal session (which we are),
the target is checked for worksWhenModal -- a property which is defined
on NSWindow, and only supposed to be set for subclasses of NSPanel.
Since our QNSFontPanelDelegate class doesn't implement this method, the
_NSTargetForSendAction function will return nil, and the action is never
sent.
If we don't set the NSFontManager target (leaving it as nil), the function
will skip the worksWhenModal check, and fall back to resolving the target
via the responder chain, which includes taking the NSPanel's delegate
into account:
#0 -[NSWindow delegate] ()
#1 -[NSWindow(NSEventRouting) supplementalTargetForAction:sender:] ()
#2 _objectFromResponderChainWhichRespondsToAction ()
#3 _NSTargetForSendAction ()
#4 -[NSApplication(NSResponder) sendAction:to:from:] ()
#5 -[NSFontManager sendAction] ()
...
Since we want to end up in the QNSFontPanelDelegate, we can rely on the
default logic to resolve the target based on the responder chain. But in
case _NSTargetForSendAction will at some point also check the resolved
target for worksWhenModal, we also implement the worksWhenModal method,
to be on the safe side.
Fixes: QTBUG-69878
Change-Id: Ie739d016fe0efd17b3d8a99cc1fb1ace81807aff
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Do not override a custom font with the style default.
Task-number: QTBUG-70276
Change-Id: I58bf43f791aee5409e29459d579725365703e4f3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is a regression from commit 346c15102b, which creates a new QRegExp
in setFilterRegExp, losing previously set case sensitivity property
(i.e. when the code does proxy->setFilterCaseSensitivity(Qt::CaseInsensitive)
before setFilterRegExp).
Interestingly that commit ensured that setFilterFixedString would still
preserve CaseSensitivity, but not setFilterRegExp(QString).
Change-Id: I3d37d001ce6e86dd90e7e07431440a42607172f9
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
The code snippets retrieving the native database driver handles was
using qstrcmp() wrong since that is returning 0 when the strings are
equal. In some snippets there was even a plain char * comparison which
would not work at all.
Fix all the places by correctly using qstrcmp() and replace the checks
for the valid pointer by not checking for 0.
Fixes: QTBUG-70598
Change-Id: I5c53dcfc51c958203fc60fa6a23dd6b27faa1d96
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
QPixmap::fromImage in QLabel paintEvent should use the rvalue
reference overload for efficiency
[ChangeLog][QtWidgets][QLabel] Minor performance improvement
when painting a label with an image
Change-Id: I8ab9bf427c1efc320907c66538e9f8e4011f5586
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Debugging PYSIDE-815 revealed that QGestureManager is instantiated in
the application destruction sequence. To prevent that, add a "force"
parameter defaulting to true to QGestureManager::instance() and pass
false in the destructors and QGestureManager::gesturePending().
Change-Id: I1b76173c926c2a156252b88832b032508d8e8a73
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The detection of multiple mouse button presses was broken in the new
WM_POINTER-based implementation. The bug was due to the incorrect
assumption that the press/release of a second mouse button (while
another one is held) would also send WM_POINTERDOWN/WM_POINTERUP, while
in fact it sends a WM_POINTERUPDATE with the actual event type given
by pointerInfo->ButtonChangeType.
Task-number: QTBUG-70787
Change-Id: Ib6776ab7f3d0b8eb5e832a0c863a15bde456e0dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Includes pop-up windows which are implicitly showWithoutActivating
windows. The QNX platform code was allowing screen to activate
these windows when they were shown.
Add code to activate showWithoutActivating windows when they are
first touched or clicked on. From there, screen handles activation
as it does for any other window.
Change-Id: If443676e497a97724e16037b34d3db1d7c335790
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Rafael Roquetto <rafael@roquetto.com>
When native dialogs become visible, their invisible proxy Qt dialog
blocks input to Qt windows. It is intended for native dialogs which
can't block Qt windows themselves, e.g. on Android. But this behavior
is incompatible with native dialogs which are implemented as in-process
Qt windows, because the proxy dialog blocks them as well.
This change introduces QPlatformDialogHelper::DialogIsQtWindow
style which allows to detect such cases and prevent blocking.
Change-Id: I8f1f741e05d09f2c27192890bcec35fdd2e8f074
Task-number: QTBUG-58116
Reviewed-by: Alberto Mardegan <mardy@users.sourceforge.net>
Reviewed-by: David Faure <david.faure@kdab.com>
The message is not sent to the QAbstractEventDispatcher, so it needs to be
excluded from the list of input messages not sent to
QAbstractNativeEventFilter.
Amends a0a22037cd.
Fixes: QTBUG-70873
Change-Id: Id84d73b46e8954867c06a4ddf5dc9e536ecd897e
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
There is no advantage to using repaint() here, so using update will
give a performance improvement.
Change-Id: Icc6a28dfc12dffb8ea3df0300fd14c66c775bf16
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When a time-zone does a spring-forward, skipping an hour (either to
start DST or to move its standard time), there's an hour that doesn't
exist on the day in question. That hour can be the first hour of the
day, in which case using 0:0 as the default time is broken. So catch
this case and use the first time that day that makes sense.
Fixes: QTBUG-70823
Change-Id: I23dae9320a3cdd2c988841a7db1b111edb945730
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTimeZonePrivate::dataForLocalTime()'s handling of times in a
spring-forward gap added offsets in seconds to values in milliseconds.
Supply the missing factor of a thousand.
Change-Id: Ic32d87675f902e1c7fd85025fb70c8272a4f2db2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Needed to fix "No toolchains found in the NDK toolchains folder for ABI
with prefix: mips64el-linux-android"
Change-Id: I62d9bae0bf424bb9ba32adce98426245922a841b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The setters of both filterRegExp and filterRegularExpression are
currently normal functions. This patch moves them to slots to make
them usable using the old syntax. This can be done since there are
already overloads for both of them so people using the new connect
syntax would have needed to use qOverload already therefore there is
no SIC.
[ChangeLog][QtCore][QSortFilterProxyModel] Setters of both the
filterRegExp and filterRegularExpression properties are now slots and
can be used with the old as well as the new syntax.
Change-Id: Id5cd9a50fa4a62e2bbd6bd665b44bd25a0402852
Fixes: QTBUG-18113
Reviewed-by: David Faure <david.faure@kdab.com>
The sample output from wildcardToRegularExpression was from an earlier
version of the implementation. This patch fixes this.
Change-Id: I48108add01aafed69490ef2527c1ea6a209b220b
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
When there are overloaded function for one class,
at least one of them mustn't possess \overload command,
otherwise it won't appear at all in doc index.
Task-number: QTBUG-59506
Change-Id: I650a3969cb45c1a5efdfc3a654e01d113c398f16
Reviewed-by: Martin Smith <martin.smith@qt.io>
Moc shouldn't artificially introduce calls to possibly overloaded
operator&. It can cause odd side effects in a user code.
Change-Id: Iaa1b491fe6a1a5ebd4dfa1172359dc792cc7604f
Fixes: QTBUG-68191
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is not allowed to include files within Qt namespace.
Change-Id: I8b87cdc7093bdf0129acca263316f8ea3a037a90
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
There is not reason why it should be kept in secret. Not having public
accessor forces a user code to keep a copy of the id. Visible for
example in QML (QQmlValueType).
Change-Id: If0de65fb8d91bcd50880c66b5f87c68f6d888dd3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When viewing "Supported HTML Subset" documentation in Qt Creator (in
QTextBrowser), the first table that lists all tags is quite unreadable
(see images). It happens because there is a code snippet in Comment
column for tag "meta" that uses pre-formatted text. Because it should
not be wrapped automatically, it ends up pushing first 2 columns into
their minimum size, which mostly makes them take a single letter per
row.
Task-number: QTBUG-64126
Change-Id: I08bf6f61806d52e7a2f47bdbed1b5950825ce739
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Add a check using GetVolumeInformation() (modeled after QStorageInfo::ready)
within a SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX scope.
Remove old #ifdef used for Windows CE.
[ChangeLog][QtCore][QDir] On Windows, QDir::drives() no longer
returns drives whose media were ejected.
Fixes: QTBUG-69029
Change-Id: I2d4a32e9281ccf3c0f2ebfa427122609aa4f327f
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Extend the check for Windows style to QProxyStyle. Amends
43b9c9b993.
Task-number: QTBUG-38776
Change-Id: I5331d0c29bea59c59309feeab153437a72e0e30f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Move the checking logic from QGuiApplicationPrivate::_q_updateFocusObject()
to QInputMethodPrivate::objectAcceptsInputMethod(), which is also called
from QWidget::updateMicroFocus() via QInputMethod::update().
Fixes: QTBUG-56767
Change-Id: Ia4cce5e7e766008df891537048d5daf739c010ff
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Using std::vector saves a bit c++ code when using range-for loop over
the vector.
Besides, no shared copies created anymore which is a bit faster.
Change-Id: I564306ed9ac907e9f32f59b33ed15c027a59b4eb
Reviewed-by: David Faure <david.faure@kdab.com>
Introduce this static function to detect tray icon windows.
The old non-static method was unused, so drop it.
Change-Id: Ia97b8a857bd1807ecd56340efbc9b145844d593e
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
In some cases OpenGL integration may be unnecessary, e.g.
an application may set Qt::AA_ForceRasterWidgets attribute
and don't use OpenGL in any other way. In addition OpenGL
initialization can take noticeable time on some configurations.
So do it on demand only.
Change-Id: If88953f8d5c826bc96fd49eb397b5e1ad693546d
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
[ChangeLog][QtWidgets][QMessageBox] On Android and iOS it's now possible
to show a QMessageBox with custom buttons as a native dialog.
Task-number: QTBUG-35545
Change-Id: Id3be69e70468f767a43ea5f2ba64f9bac1898423
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QUrl::RemoveAuthority is RemoveUserInfo | RemovePort | 0x10, so the
condition
if (options & QUrl::RemoveAuthority)
would match if any of the other bits for the username, password or port
were set, which meant we would skip the host comparison. Ditto for
username and RemovePassword.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused QUrl::matches to
incorrectly compare two URLs with different hostnames or different
usernames as equal, if certain QUrl::RemoveXxx options were passed.
Change-Id: I015970a03b874898bba7fffd155856ab9d6cb1be
Fixes: QTBUG-70774
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Before this change we inserted newline only if an option has a
description and ended up with an arbitrary long line with all options.
[ChangeLog][QtCore][QCommandLineParser] Fixed a bug that caused the help
output to show two options or more in the same line if the options didn't
have a description.
Task-number: QTBUG-70174
Change-Id: Id54b9ae13ee596869e4dc14e09301aea19eed2f8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove link to qt.nokia.com and add see also link to Qt Style Sheets
that contain the necessary information.
Change-Id: I05f6f760f3f9735f99385bdb39507b0878ec220c
Fixes: QTBUG-70805
Reviewed-by: Martin Smith <martin.smith@qt.io>
New, manually created configuration files (jconfig.h / jconfigint.h)
for building in Qt are now placed outside the src directory.
[ChangeLog][Third-Party Code] libjpeg-turbo was updated to version 2.0.0
Done-with: André Klitzing <aklitzing@gmail.com>
Change-Id: I77e34419ebe2f70038b9b80cdf13876055c2a35f
Reviewed-by: Liang Qi <liang.qi@qt.io>
Repeatedly attempt to open the clipboard in case it is opened
by other applications.
Task-number: QTBUG-27097
Change-Id: Ic1cfec0bb17e34f8c7f744add21a4431dae4f5b7
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Also fix up the docs.
To make everything more complicated, OpenGL ES 3.2 does not support
default tessellation levels. Therefore the related functions remain
OpenGL 4.0+ only.
[ChangeLog][QtGui] QOpenGLShader has been fixed to expose geometry and
tessellation evaluation/control shaders with OpenGL ES 3.2.
Task-number: QTBUG-66074
Change-Id: I2e4277912800d8302824e3fb74f61ec16f4b341d
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Pass the requested render to detectSupportedRenderers(), replacing
the bool glesOnly parameters. This allows for simplifying the code.
Fixes: QTBUG-70733
Change-Id: Iab65f62d24bf750019180e3b00e2d23c105e5997
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Mirror the behavior of working QTextEdit in QPlainTextEdit. The
WA_InputMethodEnabled flag was overridden by the following call
to setTextInteractionFlags().
Task-number: QTBUG-55699
Change-Id: I46402f5d94204acd304d56f488bb0fb342d1a846
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Otherwise, the rects will pile up when the item is not part of a view.
Task-number: QTBUG-54275
Change-Id: I29c989e25ce0ca1ac0b87d0388a476ef1acd9cfd
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This is a follow up to 60be2fb6a1.
Above change only covers resizes via QMainWindowLayout::hover. Doing a
resize via the separator was not covered.
Task-number: QTBUG-70571
Change-Id: Ic1d1cc6d672b97e8c130864f8708268fd6003204
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
Suppress keyboard events following a WM_APPCOMMAND except for
APPCOMMAND_BROWSER_HOME, which does not trigger two events.
Task-number: QTBUG-62838
Change-Id: If04206c9ef9409224b4cbc96190792b9be4f656d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Also make fullscreen windows not have a titlebar
Task-number: QTBUG-69318
Change-Id: I017fc40fecb9f46d6540ffb72a71c9b62097a368
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Remove hardcoded android log pattern as this is already part of the message to
match behavior on other platforms.
Task-number: QTBUG-69450
Change-Id: I529b550114a2164beafe305f8392891c4ead88f0
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Testing barely 10.13 seems to be insuficcient: we have developers working
on macOS 10.12 with SDK 10.13, but apparently they cannot update to the
latest SDK 10.13. We can try to be more specific and use __MAC_10_13_4.
Task-number: QTBUG-70757
Change-Id: I083d51f1a945f63f0413792387475341ecb96118
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andy Maloney <asmaloney@gmail.com>
QMdiArea::tileSubWindows() will move the active window to the first
position, in order to be consistent with other MDI applications on
Windows (according to the original commit message). However, the same
function is also used for re-tiling on resize, so we must make sure
to not reorder in that case.
Fixes: QTBUG-51761
Change-Id: Ibf93a0bf7e663f983b9160364f812c84b5539171
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The accessors have existed for a long time, but in Qt Quick it helps
to have it available as a property, in case any of the "magic"
guesses wrong about the user's intention.
[ChangeLog][QtGui][QWindow] QWindow::transientParent is now a property.
Task-number: QTBUG-67903
Task-number: QTBUG-52944
Change-Id: Ibf6ed789c4756bd934bdb4620fbcdb5879c3fb17
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Change-Id: If030b56ad97e047d89d442629262b4839df306d4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
When a QTextCursor survives its QTextDocument, the internal
QTextDocumentPrivate pointer is set to null. There are checks for
this in all the QTextCursor functions to skip out early if such
a QTextCursor is used.
However, when executing the "if (d->priv)" condition in setters,
this will access the non-const operator->() of QSharedDataPointer
and detach the QTextCursorPrivate, and in the copy constructor of
this class, there was an unprotected call into priv->addCursor().
In theory, we could cast all the checks for d->priv to avoid
detaching, but in practice this doesn't matter, since the setters
will typically detach anyway later on.
[ChangeLog][QtGui][Text] Fixed a crash that can happen when calling
a setter on a QTextCursor after its QTextDocument has been deleted.
Task-number: QTBUG-70293
Change-Id: I8f6dc5bb344d1d824f673c0c220b68b7fee237a8
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
On later versions of macOS, the font weight trait of fonts is a 64 bit
double, not a 32 bit float, and on macOS 10.14, CFNumberGetValue()
started returning false for values when the type conversion is lossy,
like it is documented to. Therefore, we would end up without weight
information in 10.14.
The fix is to ask for a double instead, which works regardless of
whether the CFNumber represents a 32-bit or 64-bit value.
[ChangeLog][macOS][Text] Fixed font weights on macOS 10.14
Task-number: QTBUG-69955
Change-Id: Ia0577236ddc6b96f9231e6de7b1c49f7f8a837a6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Jason Haslam <jason@scitools.com>
We use DirectWrite to determine whether a font is a color font
or not, so all fonts go through DirectWrite initially. However,
the load call will fail for bitmap fonts, causing us to output
lots of pointless warnings each time such a font was in use.
Instead, we only output this warning if we actually plan to
load the font through DirectWrite later. If the load fails,
we can assume it is not a color font and do not need to output
any warning for this.
[ChangeLog][Windows][Text] Removed confusing DirectWrite warning
when loading bitmap fonts.
Task-number: QTBUG-57180
Change-Id: Iaac8117745ef05a1dff23b346dbe0c6dbfb315f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Due to an implementation detail regarding setParent() and
setWindowFlags(), if a QCompleter popup ends up being the last open
window after closing the main window, the application would be
prevented from exiting even after selecting an item in the popup.
This is due to adjustQuitOnCloseAttribute() not being called when
passing a Qt::Popup flag to setParent(parent, windowFlags).
Use setWindowFlags() directly, which adjusts the quit on close
attribute, and allows an application to exit properly.
Change-Id: Ic4cff9504df268556d851e40d5ae08b7ed4dc3bf
Fixes: QTBUG-69924
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Using QPoint for calculations can lead to rounding errors which can
result in a situation where
"QCursor::setPos(somePos); QCOMPARE(pos, somePos)" fails.
Change-Id: Iaba499f67abcf5ec66adfe93bfbd79ef0102e6d0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fix warning by clang-cl:
qwindowsuiamainprovider.h(89,31): warning: 'SetFocus' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
HRESULT STDMETHODCALLTYPE SetFocus();
Task-number: QTBUG-63512
Change-Id: Iac3cbf8577423ed799796034953be39ed1663116
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Fixed warnings:
- missing override specifier
- 0 as nullptr constant
- implicit change of signedness
- non portable path to header file
Change-Id: I6977bc561176ac7804ac01325b84c15ba849bbf2
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If the input panel is not visible TryHide will result in
"Failed to hide input panel. (The operation completed successfully.)".
That happens a lot in Qt's auto tests for example.
Change-Id: Ieae17e07c3646dce8f348e21f537a2455fe03461
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Fixes the rest of the places we use the pattern of emptying the OpenGL
error stack to be able to handle GL_CONTEXT_LOST, and adds a note about
it in the documentation.
Change-Id: I7eb97dbca45f39295b832d44937023b538b19947
Reviewed-by: David Edmundson <davidedmundson@kde.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
On Windows, the error code to be used with qErrnoWarning is not errno,
but Windows's GetLastError(). Obviously, right?
So don't pass errno to it, just let it get the error message straight
from qt_error_string(), which will use GetLastError().
Change-Id: I44e7d800c68141bdaae0fffd155619c93e3f3dab
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We were handling this properly, but not testing them. I guess we weren't
testing because the condition is a valid intermediate state, so
hasFailure() is correct it returning false.
Testing inspired by the bug reported in
https://github.com/intel/tinycbor/issues/137
Change-Id: Ib47c56818178458a88b4fffd1554ecfdd0af637e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Utils.h now includes defines for _M_ARM and _M_ARM64 to enable
compilation on Windows arm and arm64.
The locally added __ghs and __EMSCRIPTEN__ clauses are preserved.
[ChangeLog][Third-Party Code] double-conversion got updated to upstream
version 3.1.1.
Task-number: QTBUG-70008
Change-Id: Ie5411ee8d9cb32c39d7dca5a2262e6b3854732a5
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This amends f5fe9fc5a4
Change-Id: I1d21f5b5f4896a11376f37ed0e39f00f2214c67b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Commit ff2a71e3 accidentally removed a code snippet used in documenting
EasingCurve::EasingFunction. This commit restores it and fixes other
minor issues in QEasingCurve code snippets.
Change-Id: Ib19f602a4abbca3511d3d26c5f6da4910f7104a3
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Some of the claims made were not strictly acurate.
Change-Id: Ia7c83ce44257acce32814c0bbb3b787bb6b8596b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Destructors whose base class have a virtual destructor are
automatically virtual and do not need to be marked as such.
Change-Id: I84c73ab965077bbb03f4213e53c241569213cae0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Align the constness of QColor::getCmyk and QColor::getCmykF with the
rest of the family (QColor::getRgb etc.) by adding overloads. The
non-const methods could be removed with the next major release as that
will break binary compatibility.
Task-number: QTBUG-65176
Change-Id: I8579928a43fb59aed3319ff73481994a54b274f8
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Albert Astals Cid
Tobias Hunger
Liang Qi
Mikhail Svetkin
Tobias Hunger
Simon Hausmann
Martin Smith
Ivan Komissarov
Edward Welbourne
Christian Ehrlicher
Frederik Gladhorn
Anton Kudryavtsev
Mårten Nordheim
Joni Poikelin
Qt Forward Merge Bot
Andre de la Rocha
Laszlo Agocs
Gatis Paeglis
Allan Sandfeld Jensen
Peter Hartmann
Oswald Buddenhagen
Alexander Volkov
Lorn Potter
Eskil Abrahamsen Blomfeldt
Michal Lazo
Marc Mutz
Samuel Gaist
Christian Strømme
Oliver Wolff
Sergio Martins
Jarek Kobus
Friedemann Kleint
Timur Pocheptsov
Leena Miettinen
Morten Johan Sørvig
Ulf Hermann
David Faure
Jędrzej Nowacki
Tor Arne Vestbø
Luca Beldi
James McDonnell
Andy Shaw
Kai Koehne
BogDan Vatra
Andrew O'Doherty
Shawn Rutledge
Thiago Macieira
Alexander Akulich
Paul Wicking
Eirik Aavitsland
Jussi Witick
hjk
Maurice Kalinowski
David Schulz
Luka Modric
Paul Olav Tvete
Alexandru Croitor
Aleix Pol
Thomas Miller
Giuseppe D'Angelo
Topi Reinio
Alessandro Portale
Sven Pauli