[ChangeLog][QtCore][QMetaMethod] It is now possible to query the
constness of a method with QMetaMethod::isConst.
Change-Id: I8a94480b8074ef5b30555aeccd64937c4c6d97d4
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This function returns the metatype corresponding to the metaobject, or
an invalid metatype for namespaces.
This works as follows: First we increment the metaobject revision for
new metaobjects. Metaobjects with older revisions are handled by doing a
lookup by name. That fallback is also used for dynamic metaobjects (from
QtDBUS and those created by QMetaObjectBuilder).
For new metaobjects, we store the metatype in its metatype array, behind
the property metatypes. This avoids any changes to the property and
method metatype extraction logic: For properties, the metatype access
does not change, as the new metatype is after their metatypes. For
method metatypes, we already have an indirection layer (using offsets),
so by adjusting those offsets by one, the same logic keeps working.
To distinguish between namespaces and dynamic metaobjects, namespaces
store the metatypeinterface pointer for void in the metatype array,
whereas dynamic metaobjects store a nullptr.
One nice additional benefit is that this simplifies the generator logic
in moc, as the metatype array is now never empty.
Task-number: QTBUG-92077
Change-Id: Id3f920f28553f12032a71a1a87dad29e5374dbe7
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Constructing a QMetaProperty can be unnecessarily expensive due to the
QMetaEnum resolution. Add a private method to construct only
QMetaProperty::Data. Make us of it in indexOfProperty.
Task-number: QTBUG-82931
Change-Id: If954538106bcfaa7d088db26591f6bd6eeaf3731
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QMetaObject::indexfOfMethod returns the method corresponding to a
specific signature. In QML, we however only want any of the methods with
a given name (and do overload resolution at a later point).
For this usecase this patch introduces the internal
QMetaObject::firstMethod function.
Change-Id: Ie3820354edffb273c4cbe1399201a955ebe79344
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Except for types marked as unresolved, we're doing it anyway - the only
difference is that now we skip looking up the metatype by typeid.
[ChangeLog][QMetaProperty][Important Behavior Change]
QMetaProperty::typeName returns now always the same name as name() of the
corresponding metatype. This can cause a change for enum properties
which were not fully-qualified.
Change-Id: I1f57743948b7262ac06095d3bbc838d620f6e481
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
At the moment we have two main strategies for dealing with move
assignment in Qt:
1) move-and-swap, used by "containers" (in the broad sense): containers,
but also smart pointers and similar classes that can hold user-defined
types;
2) pure swap, used by containers that hold only memory (e.g. QString,
QByteArray, ...) as well as most implicitly shared datatypes.
Given the fact that a move assignment operator's code is just
boilerplate (whether it's move-and-swap or pure swap), provide two
_strictly internal_ macros to help write them, and apply the macros
across corelib and gui, porting away from the hand-rolled
implementations.
The rule of thumb when porting to the new macros is:
* Try to stick to the existing code behavior, unless broken
* if changing, then follow this checklist:
* if the class does not have a move constructor => pure swap
(but consider ADDING a move constructor, if possible!)
* if the class does have a move constructor, try to follow the
criteria above, namely:
* if the class holds only memory, pure swap;
* if the class may hold anything else but memory (file handles,
etc.), then move and swap.
Noteworthy details:
* some operators planned to be removed in Qt 6 were not ported;
* as drive-by, some move constructors were simplified to be using
qExchange(); others were outright broken and got fixed;
* some contained some more interesting code and were not touched.
Change-Id: Idaab3489247dcbabb6df3fa1e5286b69e1d372e9
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Mostly related to qstrlen().
Change-Id: I69e2052c83766e4fc466ed398d0d0eac011a77ec
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Add a new BINDABLE declaration to the Q_PROPERTY() macro that tells moc
where to find the QBindable for the property.
Add a QUntypedBindable base class to QBindable<T> that gives access to
generic functionality and checks argument compatibility at runtime.
QBindable<T> will still do static checking at compile time.
Add QMetaProperty::isBindable() and QMetaProperty::bindable()
to be able to dynamically access the binding functionality.
Change-Id: Ic7b08ae2cde83fd43e627d813a886e1de01fa3dc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
As there is now a chance that a QMetaMethod already contains the
metatypes for its arguments, we can just query it directly (and use the
fallback to name lookup logic that already exists there).
This also allows us to avoid creating a QList of names, and only
requires us to do a name lookup in case the connection actually fails.
Change-Id: Idda30bc4b538a94476ae6c533776c22340f0030d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And don't use int based type mapping anymore.
Change-Id: I456e76d1933ef646a7bd39ce565886b89e938a44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And remove one of the type id to name mapping that still
existed in QMetaType. QMetaTypeInterface can provide that,
so there's no need to have a second copy of the data.
qMetaTypeTypeInternal() can still map all the names of all
builtin types to ids. That functionality is for now still
required by moc and can't be removed yet.
Change-Id: Ib4f8e9c71e1e7d99d52da9e44477c9a1f1805e57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- Remove obsolete functions and enumeration values
- Remove QObject * parameter from QMetaProperty accessors
- Fix renamed enumerations in QSsl
- Fix list items to be \li
- Fix function signatures and variable names
Change-Id: I37c7e6bf2c8ff92bc7b82620bae0a27796f866ab
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Comparing threadIds is faster, especially if invoked from a non qt thread,
where QThread::currentThread() needs to create a QAdoptedThread/QThreadData first.
Pick-to: 5.15
Change-Id: I44b3013283754f1a5ac9d62debcf4c82be77c554
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And name the main class QList. That's also the one we document.
This gives less porting pain for our users, and a lot less churn
in our API, as we use QList in Qt 5 in 95% of our API.
In addition, it gives more consistent naming with QStringList and
QByteArrayList and disambiguates QList vs QVector(2|3|4)D.
Fixes: QTBUG-84468
Change-Id: I3cba9d1d3179969d8bf9320b31be2230d021d1a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is required if we want to be able to get rid of the property
cache.
Also reserve a flag for var properties, in case it turns out that we
need to keep the distinction between var and QVariant properties in QML.
Change-Id: I55c2191adcc2d94bd8f148216e26423defaa900f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Remove QMetaProperty index member. Instead, add a function to compute it
on demand from the QMetaObject.
Also remove the remains of the signature function.
Original-patch-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: I5b16d444e7474216a535e3e93a118825cd0e6090
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This changes the layout of the meta object data, so
also bump the meta object revision.
Original-patch-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: I176fb16c207e8ebe59e358e69554be813406232f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Property flags should be compile time booleans, not something to
be determined at runtime.
We've been using this to dynamically disable some properties in QWidget
based classes dependent on the state of a different property, but this
should better get implemented on top of our widgets.
Change-Id: I6296e8761303ecdf24d9e842142e8596304c015d
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Centralize the offset handling in one place and avoid lots of magic
numbers in various places. Expose the number of ints per method in
QMetaObjectPrivate as a constant, so that code in other places can
access it via private API.
Change-Id: I59790287a17ea47e6160ec65d9c8d0aaee748947
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This does the analog of 46f407126e for the
methods we care about (signals, slots, Q_INVOKABLEs). In addition to the
actual QMetaType, we store an array with offsets so that we later can do
a mapping from methodIndex to metatype.
The newly added QMetaMethod::{return,parameter}MetaType methods can then
be used to retrieve the metatypes.
This does however require that all involved types are complete. This is
unfortunately not a feasible requirement. Thus, we only populate the
metatype array on a best effort basis. For any incomplete type, we store
QMetaType::Unknown. Then, when accessing the metatype, we fall back to
the old string based code base if it's Unknown.
Squashes "moc: support incomplete types" and "Fix compile failures
after QMetaMethod change"
Fixes: QTBUG-82932
Change-Id: I6b7a587cc364b7cad0c158d6de54e8a204289ad4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Split long signature into multiple lines, and indent some existing
misaligned signatures.
Change-Id: Icaed7b703c3f0b20472400b186ac2a28f1ff1dd1
Pick-to: 5.15
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
Additionally mark QMetaProperty::isEditable as deprecated.
Change-Id: I1abe4c6f2d30c2f96380f9e5942be431dbfed38f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
At the moment this makes the type as well as the setter/getter available
through the meta-call as well as the ability to register observers and
bindings. Only QProperty members that are annotated with
Q_PROPERTY(type name) are made public through the meta-object.
Change-Id: I16b98fd318122c722b85ce61e39975284e0c2404
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This also fix the normalization algorithm:
- Some 'const' after pointers were not removed as they should.
- No need to keep the space in '> >' and '< :' in C++11 anymore
- Fix normalization of 'long unsigned int' and similar
Change-Id: I2b72f0fede96c1063e7b155d9f25a85fccfc7bf9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is meant to correspond to required properties in QML.
Change-Id: I2645981e13f7423bc86b48370c165b3cfe2aaa62
Task-number: QTBUG-81561
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
I made a clazy automated check that replaced the use of QVariant::Type
by the equivalent in QMetaType.
This has been deprecated since Qt 5.0, but many uses were not yet removed.
In addition, there was some manual changes to fix the compilation errors.
Adapted the Private API of QDateTimeParser and QMimeDataPrivate
and adjust QDateTimeEdit and QSpinBox.
QVariant(QVariant::Invalid) in qstylesheet made no sense.
But note that in QVariant::save, we actually wanted to use the non-user type.
In the SQL module, many changes were actually reverted because the API
still expects QVarient::Type.
Change-Id: I98c368490e4ee465ed3a3b63bda8b8eaa50ea67e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Don't store our string data as QByteArrayLiterals anymore, but revert
back to simply storing them as an array of char* and offsets into that
array.
This is required to be able to inline size and begin into QByteArray
itself. Once that change is done, we can then avoid creating copies of
the string data again.
Change-Id: I362a54581caefdb1b3da4a7ab922d37e2e63dc02
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The next change will stop using some values in the reference counter as
settings from the data.
Change-Id: I94df1fe643896373fac2f000fff55bc7708fc807
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In almost all cases, use d->allocatedCapacity() or
d->constAllocatedCapacity() instead of d->alloc, since they do the
same thing (right now). In the future, the functions will be
changed. There is a separate const version because most const code
should not need to know the allocation size -- only mutating code
should need to know that
There are a few cases where d->alloc was replaced with a better
alternative, like d->size. The one case that remains in the code will
be replaced by a different test when it's available.
Change-Id: I48135469db4caf150f82df93fff42d2309b23719
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of stealing one bit from the alloc field, let's use a full
32-bit for the flags. The first flag to be in the field is the
CapacityReserved (even though the allocate() function will store some
others there, not relevant for now).
This is done in preparation for the need for more flags necessary
anyway.
Change-Id: I4c997d14743495e0d4558a6fb0a6042eb3d4975d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Since I can't #include qobjectdefs from qnamespace because of circular dependency,
move the Qt macro in the qtmetamacros.h header.
Deprecate QObject::staticQtMetaObject since now one can just use Qt::staticMetaObject
Change-Id: I11982aa17c2afa2067486b113f8052672f3695eb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Volker Hilsheimer
Fabian Kosmale
David Skoland
Topi Reinio
Allan Sandfeld Jensen
Lars Knoll
Giuseppe D'Angelo
Edward Welbourne
Friedemann Kleint
Mike Achtelik
Ivan Tkachenko
Qt Forward Merge Bot
Simon Hausmann
Olivier Goffart
Sze Howe Koh
Thiago Macieira