Due to the way Qt 5 and 6 registered type names, they end up producing
different type names for the same content for a typedef. For example,
because Q_DECLARE_METATYPE can't manage a comma (it's a macro), users
are forced to write something like:
using MyTypeMap = QMap<QString, MyType>
Q_DECLARE_METATYPE(MyTypeMap)
Qt 5's Q_DECLARE_METATYPE's argument "MyTypeMap" was the only name we
knew about the type, so that's what got saved in the stream. However, Qt
6 QtPrivate::typenameHelper is much more clever and obtains the name
from the compiler itself, so it "sees through" the typedef and registers
"QMap<QString,MyType>" as the official type name.
If another library/plugin has a different typedef name for the same type
(e.g., StringTypeMap), it's indeterminate which type gets saved and will
even change from run to run (depends on the QHash order).
[ChangeLog][QtCore][QDataStream] If QDataStream is used with a
QDataStream::Version < Qt_6_0 to serialize a user type that was
registered via a typedef with the metatype system, the typedef's name is
used in the stream instead of the non-typedef name. This restores
compatibility with Qt 5, allowing existing content to read the same
QDataStreams; reading from older Qt 6 versions should not be affected.
(Note: if more than one typedef name is registered, it's indetermine
which name gets used)
Fixes: QTBUG-96916
Pick-to: 6.3 6.2
Change-Id: I2bbf422288924c198645fffd16a8d811aa58201e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- add test resources to binaries
- link Qt::Gui to tst_qpointer for static build case
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I311827b9c641eaf9537091b051c15f9fcbcb9f0c
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This ensures that a command such as
$ ninja tst_qlocale && ninja tst_qlocale_check
will automagically build the syslocaleapp program that the test runs
from a subtest. Similar for testlib's selftests and tst_QProcess.
As a drive-by, pruned some legacy comments from when CMakeLists.txt
files were generated from .pro files.
Change-Id: I67691a8175aaef124d4104cf1898193993408bdf
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
The parser was lenient in accepting backslashes followed by invalid
characters, but accidentally sign-extended everything above 0x7f causing
broken outputs that weren't valid UTF-16 either.
For example, the sequence "\\\xff" (backslash followed by 0xff) produced
sequence "\ud7bf\udfff" (U+D7BF is not a surogate pair).
Change-Id: Ie72b0dd0fbe84d2caae0fffd16a113c703a7696f
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove SRCDIR defines from tests that don't use them. There is a
standard define called QT_TESTCASE_SOURCEDIR that is available to all
tests and serves the same purpose.
Pick-to: 6.2
Change-Id: I2aa237739c011495e31641cca525dc0eeef3c870
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The BASE argument of qt_add_resources now denotes the root point of the
alias of the file. Before, BASE was merely prepended to every file that
got passed to qt_add_resources.
Old behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "images/button.png")
Alias is "../shared/images/button.png", and pro2cmake generated
QT_RESOURCE_ALIAS assignments to fix this.
New behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "../shared/images/button.png")
The alias is "images/button.png". No extra QT_RESOURCE_ALIAS assignment
is needed.
The new behavior is in effect for user projects and for Qt repositories
that define QT_USE_FIXED_QT_ADD_RESOURCE_BASE. Qt repositories will be
ported one by one to this new behavior. Then the old code path can be
removed.
Pick-to: 6.1
Task-number: QTBUG-86726
Change-Id: Ib895edd4df8e97b54badadd9a1c34408beff131f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Cast consistently to quint8, which is the type we are streaming out
in the test.
Change-Id: I44d360ca6b75f14e7a2b80962ad249a6f6b1cb31
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this change, QXmlStreamReader prefix value was always an empty
string for EndElement when the documentation state : "Returns the prefix
of a StartElement or EndElement."
The error was a missing update of the prefix value when parsing
EndElement.
I updated the tests data which were also wrong because no prefix were
reported even for </a:foo>. No new test is necessary, I think, the test
data already cover the cases of EndElement with a prefix and without one
(unchanged here).
Fixes: QTBUG-86847
Pick-to: 5.15 6.0 6.1
Change-Id: I0ad38b9741d760f1ce688a36f969ec14e20a928c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There isn't a QByteArray constructor taking a char8_t*. (I am not
sure if there should be one; QByteArray is not going to anything
special about that information anyways.)
Change such strings to be "ordinary" narrow string literals.
There should be no problems at doing so, as by default we build in
UTF-8 mode under all compilers.
Pick-to: 6.1 6.0
Change-Id: Ia200ec6e3b0453bad033d5d8ff34c013bb27abd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Test data causes the QBitArray to be read as 0 byte length. Same issue
on all 32bit systems, removing android blacklisting as this was the only
one failing there.
Task-number: QTBUG-87660
Change-Id: I63f0c1c6fa4e2242e6ebe70f50e422ab0fbf1c88
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
cborlargedatavalidation.cpp:93:60: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 2 has type ‘qsizetype’ {aka ‘int’} [-Wformat=]
93 | QTest::addRow("bytearray-too-big-for-qbytearray-%llx", v)
| ~~~^ ~
| | |
| | qsizetype {aka int}
| long long unsigned int
| %x
The cast to size_t is required to make the 64-bit not complain due to
the long vs long long difference.
Pick-to: 5.15 6.0
Change-Id: I00b01c01a66748508ea1fffd164a9add2a2650cf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
I don't know which of the previous commits caused this: as far as I can
tell, this test should never have passed.
Pick-to: 5.15 6.0
Change-Id: I55083c2909f64a1f8868fffd164e7e8c24eec1f8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Because CBOR strings are encoded in UTF-8, it's possible that the string
that won't fit a QString in UTF-16 would still fit QByteArray in UTF-8
(e.g., anything US-ASCII and most Latin text).
The previous solution was an improvement because we used to read into a
QByteArray then convert the QByteArray to QString, thus using 3x the
amount of memory (1x in QByteArray, 2x in QString). The previous commit
skipped the middle allocation and made the regular readString() function
do the decoding either directly on source memory or by reading in small
chunks (16 kB).
Future improvement for Qt 6.1: add readStringChunk(char16_t *, qsizetype)
so we can do the validation / skipping at O(1) memory.
Pick-to: 5.15 6.0
Change-Id: I7b9b97ae9b32412abdc6fffd1645458c655cc566
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Similar to the previous commit which applied to QCborStreamReader, don't
allocate too much data before checking that the stream actually has that
much.
Pick-to: 5.15 6.0
Fixes: QTBUG-88256
Change-Id: I7b9b97ae9b32412abdc6fffd16454b7568a063ba
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
By calling the internal readStringChunk() function with a QByteArray
pointer, QCborStreamReader::readByteArray() can now avoid allocating the
resulting buffer until the internals have confirmed that there is
sufficient data in the incoming buffer. As a result, we first detect the
EOF condition before we conclude the payload would have been too big for
QByteArray (validation()) test. Meanwhile, the hugeDeviceValidation()
test ends up with a few conditions where it would have copied 1 GB of
data, so limit that too.
We make a choice of reporting OOM vs DataTooLarge only if QByteArray
fails to allocate in the first place (QByteArray::resize() ->
Q_CHECK_PTR -> qBadAlloc, QtCore is always built with exceptions on).
The QCborValue unit test needed a temporary work around until we apply
the same allocation fix (see next commit).
Pick-to: 5.15 6.0
Fixes: QTBUG-88253
Change-Id: I7b9b97ae9b32412abdc6fffd164523eeae49cdfe
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Make sure ulonglong variant converts to a double JSON value when the
value is greater than 2^63.
Change-Id: I4d4392b05de29c220624056d5d0d4664fb2c08b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests are failing with "java.lang.UnsatisfiedLinkError: dlopen
failed: invalid ELF file" at the start, excluding them now to enable
Android testing until they're fixed later.
Task-number: QTBUG-87671
Task-number: QTBUG-87025
Change-Id: Ida7d7158fccdc31df1f9689f77fde832964d732f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QChar should not be convertible from any integral type except from
char16_t, short and possibly char (since it's a direct superset).
David provided the perfect example:
if (str == 123) { ~~~ }
compiles, with 123 implicitly converted to QChar (str == "123"
was meant instead). But similarly one can construct other
scenarios where QString(123) gets accidentally used (instead of
QString::number(123)), like QString s; s += 123;.
Add a macro to revert to the implicit constructors, for backwards
compatibility.
The breaks are mostly in tests that "abuse" of integers (arithmetic,
etc.). Maybe it's time for user-defined literals for QChar/QString,
but that is left for another commit.
[ChangeLog][Potentially Source-Incompatible Changes][QChar] QChar
constructors from integral types are now by default explicit.
It is recommended to use explicit conversions, QLatin1Char,
QChar::fromUcs4 instead of implicit conversions. The old behavior
can be restored by defining the QT_IMPLICIT_QCHAR_CONSTRUCTION
macro.
Change-Id: I6175f6ab9bcf1956f6f97ab0c9d9d5aaf777296d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since the QVariant types are deprecated in Qt6, use QMetaType instead
Change-Id: I7bddea15a3f1a534d3c6f6b9e7ddf9585a8423bf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
For iterators that return a value, don't use reference in ranged for,
and cast numeric literal to correct size type for QCOMPARE.
Change-Id: Idfd09dbc2ef3ab1bf025c7859ea6e2e9572bc9a1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The logic was complex and missed the UTF-8 UTF-8 case. It ended up
calling the UTF-8 to Latin1, resulting in an improperly-sorted
container, which in turn meant keys were not found when searched.
Fixes: QTBUG-86873
Pick-to: 5.15
Change-Id: I0d3ff441bec041728945fffd16379dec418637ca
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It is lossy, so should be requested explicitly, using a dedicated
fromPixmap factory function.
Deprecate the constructor and assignment operator, and make the
constructor explicit.
[ChangeLog][QtGui][QBitmap] Implicitly constructing and assigning
to a QBitmap from a QPixmap has been deprecated, and the respective
constructor has been made explicit. Use the fromPixmap factory
function instead.
Change-Id: I68ce85b26c901415137b664a1db687021d48bae0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
test.bjon file doesn't exist, however, it's still included in json.qrc.
That causes the test to fail on Android because it's using that resource
file.
Change-Id: I1e93076069073a1a621459a7d90aec5c0c03f768
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This was overlooked when doing the conversion to use UTF-8 as the
standard 8 bit encoding for text.
Fixes: QTBUG-54942
Change-Id: Ib7b1b75b4d694648ab7143f6930b6bb1dcad19c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has been deprecated and will live in qt5compat from now on.
Fixes: QTBUG-86480
Change-Id: I3744c7cee058d51d0fce633a174ab1a0f9235d2c
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Better to provide the correct meta type to convert to.
Change-Id: I8e0d46e4ba482186201c157e302c03874bd38e7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Export some private functions from QUtf8 to resolve
undefined symbols in Qt5Compat after moving QStringRef.
Task-number: QTBUG-84437
Change-Id: I9046dcb14ed520d8868a511d79da6e721e26f72b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Check that we can successfully instantiate the data
stream operator for a container before we actually try.
This is required so we can automate registration of debug
stream operators with QMetaType.
Change-Id: Ib100a5242470d7fc8067058cc4d81af2fa9354b0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
After reimplementing Qt JSON support on top of CBOR, there were
unintended behavior changes when converting QVariant{, List, Map} to
QJson{Value, Array, List} due to reusing the code for converting
QVariant* types to CBOR types, and from CBOR types to corresponding JSON
types. In particular, conversions from QVariant containing QByteArray to
JSON has been affected: according to RFC 7049, when converting from
CBOR to JSON, raw byte array data must be encoded in base64url when
converting to a JSON string. As a result QVariant* types containing
QByteArray data ended up base64url-encoded when converted to JSON,
instead of converting using QString::fromUtf8() as before.
There were also differences when converting QRegularExpression.
Reverted the behavior changes by adding a flag to internal methods for
converting CBOR to JSON, to distinguish whether the conversion is done
from QVariant* or CBOR types. These methods now will fall back to the old
behavior, if the conversion is done using QJson*::fromVariant*().
Additionally fixed QJsonValue::fromVariant conversion for NaN and
infinities: they should always convert to QJsonValue::Null. This works
correctly when converting from variant to QJsonArray/QJsonObject, but has
been wrong for QJsonValue.
Added more tests to verify the expected behavior.
[ChangeLog][Important Behavior Changes] Restored pre-5.15.0 behavior
when converting from QVariant* to QJson* types. Unforeseen consequences
of changes in 5.15.0 caused QByteArray data to be base64url-encoded; the
handling of QRegularExpression was also unintentionally changed. These
conversions are now reverted to the prior behavior. Additionally fixed
QJsonValue::fromVariant conversions for NaN and infinities: they should
always convert to QJsonValue::Null.
Fixes: QTBUG-84739
Change-Id: Iaee667d00e5363906eedbb67948b7b39c9d0bc78
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Comparing two variants will not try to convert the types
of the variant anymore. Exceptions are when both types are
numeric types or one type is numeric and the other one a
QString. The exceptions are there to keep compatibility with
C++ and to not completely break QSettings (which needs automatic
conversions from QString to numeric types).
[ChangeLog][Important Behavior Changes] Comparing two
variants in Qt 6 will not try attempt any type conversions before
comparing the variants anymore. Instead variants of different type
will not compare equal, with two exceptions: If both types are numeric
types they will get compared according to C++ type promotion rules. If
one type is a QString and the other type a numeric type, a conversion
from the string to the numeric tpye will be attempted.
Fixes: QTBUG-84636
Change-Id: I0cdd0b7259a525a41679fb6761f1e37e1d5b257f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ibdc95e9af7bd456a94ecfffd16066c47ea9766d0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QJsonDocument] Fixed a bug that caused
QJsonDocument's equality operator to crash if one of the operands was
default-constructed and the other wasn't.
Pick-to: 5.15
Fixes: QTBUG-85969
Change-Id: I5e00996d7f4b4a10bc98fffd1629f835f570ef6b
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Deprecated in 5.15 in favor of CBOR.
Fixes: QTBUG-81239
Change-Id: I711d4bd7dd1247f58e77ac9fa53304cbe5028918
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The tests are testing deprecated functionality, which we
still want to test.
Change-Id: Iad6ed35800896170c17fe019c7a6ecda22398ac3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
warning: format specifies type 'int' but the argument has type 'qsizetype' (aka 'long long')
Change-Id: I6099b53efecea46d191d5dc019c986f99e49c1f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The change creates a slight source incompatibility. The main
things to take care of are
* code using printf statements on list.size(). Using qsizetype in
printf statements will always require a cast to work on both 32
and 64 bit.
* A few places where overloads now get ambiguous. One example is
QRandomGenerator::bounded() that has overloads for int, uint and
double, but not int64.
* Streaming list.size() to a QDataStream will change the format
depending on the architecture.
[ChangeLog][QtCore][QList] QList now uses qsizetype to index into
elements.
Change-Id: Iaff562a4d072b97f458417b670f95971bd47cbc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When I wrote the QCborValue to QJsonValue conversion, I used
QJsonValue::Undefined because it allowed to keep some level of
compatibility in CBOR, despite the function documentation saying that
CBOR undefineds became JSON nulls. Which they did.
But when we converted QJson{Array,Object} to be backed by CBOR classes,
that Undefined meant the insertion into the array/object actually
deleted the entry.
[ChangeLog][JSON] Fixed a regression from 5.14 that caused values of
default-constructed QVariants in QVariantLists, QVariantMaps and
QVariantHashes to disappear when converting to JSON via
fromVariant{,List,Map,Hash}.
Fixes: QTBUG-84610
Pick-to: 5.15
Change-Id: Ic0987177fe463f352db9bd84993f116e2bdacc75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All our tests were find() == end() or !=, which depends on the
evaluation order of the arguments to operator==(). If end() is called
first, then the detach happens before find() and all is well. But if
find() is called first, it may return end() before end() detaches.
[ChangeLog][QCborMap] Fixed a bug that could cause the iterator returned
from a failing key search with find() not to match end(). Now, every
call to find() will detach in shared QCborMaps; to avoid this, use
constFind() and constEnd().
Fixes: QTBUG-84583
Pick-to: 5.15 5.12
Change-Id: I552d244076a447ab92d7fffd161793496a8d03a8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And name the main class QList. That's also the one we document.
This gives less porting pain for our users, and a lot less churn
in our API, as we use QList in Qt 5 in 95% of our API.
In addition, it gives more consistent naming with QStringList and
QByteArrayList and disambiguates QList vs QVector(2|3|4)D.
Fixes: QTBUG-84468
Change-Id: I3cba9d1d3179969d8bf9320b31be2230d021d1a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add default parameter for arguments in start, startDetached, and
execute for better source compatibility with Qt 5.15. This has the risk
of then hiding incorrect calls to the previous overload taking a single
"command" strings if code is ported from pre-5.15 or ignores deprecation
warnings. This is acceptable, given that the alternative is that all
calls to these functions would require a default constructed QStringList
as the second parameter.
Change-Id: I1ba4df97ac4894d007da5083c8359015d784ddbb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add an operator QVariant() to QRegExp to keep things at source compatible
as possible.
Add a hack to QVariant::load/save() to recognize the old typeid
for QRegExp and stream them correctly as long as the streaming operators
for QRegExp are registered.
Also move the datastream test for QRegExp to tst_qregexp, and adjust it to
the qvariant changes.
Change-Id: I120b38a7541b43ec07a21b17f7f35c55f071eb75
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Document QStringConverter, QStringDecoder and QStringEncoder.
In addition, do some touches to the API, renaming one enum value,
add a flags argument to one constructor and make some members private.
Change-Id: I8f99dc3d98fb8860cf6fa46301e34b7eb400511b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QStringConverter instead. Also change the default
encoding of QTextStream to utf8.
Change-Id: I30682e75fe0462d1a937539f773640c83a2d82e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a first step add setEncoding/encoding() methods that use the
QStringConverter::Encoding enum, and port all uses of setCodec()/
codec() over to the new API.
Internally QTextStream still uses QTextCodec, this will be ported
over to QStringConverter in a follow-up change.
Change-Id: Icd764cf47b449b57f4ebd010c2dad89e6717d6c0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove support for setting a codec different from UTF-8
for writing XML files.
All XML readers today can handle UTF-8, and there is no
reason anymore to write a file in a different encoding.
Change-Id: If89fb2d2474a2b55644d9bed7473c11ad91033eb
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
We checked against integer overflow, but not against overflowing the
QByteArray size limit. That caused a std::bad_alloc to be thrown, which
is bad when decoding unknown data. QCborStreamReader wasn't affected,
since it doesn't merge chunks.
Change-Id: I99ab0f318b1c43b89888fffd160c36f495fada87
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This file mustn't have changed at all, aside from the copyright headers,
since we switched to Git in October 2008.
Quick check shows the data from W3C is still online:
https://dev.w3.org/cvsweb/2001/XML-Test-Suite/
I didn't check that the CVS server is actually running because none of
my machines even has the cvs command anymore...
Pick-To: 5.15
Change-Id: I4e559af2a9a1455ab770fffd15f4e740114a2433
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QUrl will reject invalid URLs for us, so we don't get normalization. The
original junk should be retrievable, of course.
Change-Id: Ibdc95e9af7bd456a94ecfffd160610f5b2c8e1a2
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We rely on QDateTime::fromString being proper, so this is not extensive
testing.
Change-Id: Ibdc95e9af7bd456a94ecfffd160610cdac5d62e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
By QCborValue design, we store the textual representation in ISO format,
equivalent of CBOR tag 0, which isn't allowed to have negative years or
beyond year 10000.
Change-Id: Ibdc95e9af7bd456a94ecfffd16060ccff359c296
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QDateTime::fromSecsSinceEpoch() multiplies by 1000 but does not check
for overflow. That means we must do so in QCborValue validation. We
can't use mul_overflow<qint64> on 32-bit platforms, so we do a compare-
and-branch there. For 64-bit platforms, we prefer to do the
multiplication with checked overflow, as the common case is that it will
not overflow and we'll need the multiplication anyway.
Change-Id: Ibdc95e9af7bd456a94ecfffd16060cba6f1c86b8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The internal removeAt(index) method was implemented as taking cbor
indexes directly, in contrast to the other ...At(index) methods.
Fixes: QTBUG-83695
Change-Id: I16597eb6db1cf71e1585c041caa81bf8f7a75303
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The double-swap technique I used was flawed and broke on
self-assignment. What I had meant to use was the move-and-swap
technique. Thanks to Peppe for pointing it out.
This also fixes a compiler bug in the Green Hills compiler. It was
finding the wrong "swap" function in qSwap:
using std::swap;
swap(value1, value2);
It's supposed to find swap(QCborValue &, QCborValue &) due to argument-
dependent lookup. It's instead finding std::swap<QCborValue>, which
recurses.
Fixes: QTBUG-83390
Change-Id: Ibdc95e9af7bd456a94ecfffd1603e1bee90cd107
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This was never tested. The infinite loop in QCborContainerPrivate::grow
is the proof.
[ChangeLog][QtCore][QCborArray] Fixed an infinite loop when operator[]
was called with with an index larger than the array's size plus 1.
Change-Id: Ibdc95e9af7bd456a94ecfffd1603df3855c73f20
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Similar to the QJsonObject issue of the previous commit (found with the
same tests, but not the same root cause). One fix was that copying of
byte data from the QByteArray to itself won't work if the array
reallocates. The second was that
assign(*that, other.concrete());
fails to set other.d to null after moving. By calling the operator=, we
get the proper sequence of events.
[ChangeLog][QtCore][QCborMap] Fixed some issues relating to assigning
elements from a map to itself.
Note: QCborMap is not affected by the design flaw discovered in
QJsonObject because it always appends elements (it's unsorted), so
existing QCborValueRef references still refer to the same value.
Task-number: QTBUG-83366
Change-Id: Ibdc95e9af7bd456a94ecfffd1603df846f46094d
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The refactoring to use CBOR missed two places where we could assign from
the same object and thus cause corruption. In fixing this issue, I found
a design flaw in QJsonObject, see Q_EXPECT_FAILing unit test and task
QTBUG-83398.
[ChangeLog][QtCore][QJsonObject] Fixed a regression from 5.13 that
incorrect results when assigning elements from an object to itself.
Fixes: QTBUG-83366
Change-Id: Ibdc95e9af7bd456a94ecfffd1603df24b06713aa
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
We should not implicitly convert a QString to a QLocale object. It can
easily create unwanted side effects.
Change-Id: I7bd9b4a4e4512c0e60176ee4d241d172f00fdc32
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QByteArray doesn't like it.
Apply the same protection to QString, which we know uses the same
backend but uses elements twice as big. That means it can contain
slightly more than half as many elements, but exact half will suffice
for our needs.
Change-Id: Iaa63461109844e978376fffd15f9d4c7a9137856
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A simple 16k file can produce deep enough recursion in Qt to cause stack
overflow. So prevent that.
I tested 4096 recursions just fine on my Linux system (8 MB stack), but
decided 1024 was sufficient, as this code will also be run on embedded
systems that could have smaller stacks.
[ChangeLog][QtCore][QCborValue] fromCbor() now limits decoding to at
most 1024 nested maps, arrays, and tags to prevent stack overflows. This
should be sufficient for most uses of CBOR. An API to limit further or
to relax the limit will be provided in 5.15. Meanwhile, if decoding more
is required, QCborStreamReader can be used (note that each level of map
and array allocates memory).
Change-Id: Iaa63461109844e978376fffd15fa0fbefbf607a2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QLinkedList has been deprecated, but we still need to test it. Suppress
the warnings for QLinkedList used in tests. Note, that I had to move
some of the test code, to avoid repeating
QT_WARNING_PUSH/QT_WARNING_POP everywhere.
Change-Id: I4203b3ef50045c4f45475a08638dbdc60f68761d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Thiago Macieira
Tatiana Borisova
Pasi Petäjäjärvi
Edward Welbourne
Ievgenii Meshcheriakov
Joerg Bornemann
Volker Hilsheimer
Vincent Baijot
Giuseppe D'Angelo
Ulf Hermann
Samuli Piippo
David Skoland
Alexandru Croitor
Sona Kurazyan
Assam Boudjelthia
Lars Knoll
Allan Sandfeld Jensen
Karsten Heimrich
Tor Arne Vestbø
Lars Schmertmann
Jarek Kobus
Oliver Wolff
Kari Oikarinen
Liang Qi
Qt Forward Merge Bot
Eirik Aavitsland