QPlainTextEditPrivate::updatePlaceholderVisibility() issued a full
viewport update, when the document became empty and the placeholder text
needed to be shown. No update was issued, when the placeholder text was
replaced by a first text character entered.
That relied on the assumption, that the placeholder text would disappear
with the first text line being rendered (even if it has just one char).
When the placeholder text covered multiple line, only the first of them
disappeared.
This patch adds a boolean to remember, that the placeholder text is
shown. If that is the case and the first char is entered, a full update
is issued, to remove all lines of the placeholder text. The boolean flag
is cleared thereafter, to avoid unnecessary viewport updates.
isPlaceHolderTextVisible() is renamed into placeHolderTextToBeShown(),
because the method returns an instruction, rather than a state.
tst_QPlainTextEdit::placeholderVisibility() is adapted to test the
boolean flag, hence the real visibility of the placeholder text.
That extends its scope to the bug at hand.
Fixes: QTBUG-119808
Pick-to: 6.7 6.6 6.5 6.2
Change-Id: I07a7059ae619dc85d0c21247d829120e6afa7115
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Embedding a QWidget in a window container (via its windowHandle())
may cause crashes, e.g. during drag & drop and when the application
goes out of scope.
If a QWidget->windowHandle() is attempted to be embedded in a window
container, return the pointer to the widget instead of creating a
container.
Add an autotest.
Update documentation.
[ChangeLog][QtWidgets][QWindowContainer] If createWindowContainer()
is called with a QWidgetWindow argument, return pointer to the
widget instead of new container.
Pick-to: 6.7
Fixes: QTBUG-119113
Change-Id: Id052a03be13adce05bbd025d86270d265dfb662e
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
If a widget received a DragEnter event that it didn't accept, then the
UnderMouse widget attribute gets set. But the drag manager never got a
drag target, so the DragLeave event was never delivered, leaving the
UnderMouse attribute set incorrectly.
We always need to send DragLeave events to the receiver, even if the
DragEnter or DragMove was not accepted. Otherwise we are not in balance,
and the UnderMouse attribute will remain set.
This is a change of behavior and a very old bug, so only fixing this in
unreleased branches. Test case added to verify that explicitly generated
drag events result in the correct enter/leave events.
[ChangeLog][QtWidgets][QWidget] DragLeave events are now always sent to
the widget the mouse is leaving, even if it didn't accept the DragEnter
event.
Fixes: QTBUG-50403
Pick-to: 6.7
Change-Id: I5eae49da000fb4fea81f1767f0e73a06a6b78975
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QDialogButtonBox::layoutButtons() rebuilds the focus chain based on the
button layout. It relied on the fact that the last button in the layout
would point back to the first button. That is not the case, if
- a focus frame gets inserted in the chain, and
- the default button is not at the layout's first (=left) position.
In that case, the chain stops at the button left of the default button.
The default button can not be reached by tabbing forward. Back-tabbing
still worked.
By not "closing" the focus chain, the focus proxy was set to the first
button found in the layout. That is wrong, whenever the default button
is not at the first layout position. When the box got focus for the
first time, pressing "Enter" could lead to a non-default button being
triggered. A Yes/No message box would have No as its default button.
On Linux, it would pop up with "No" being highlighted, but "Yes" having
focus. Pressing Enter would trigger Yes, instead of No.
tst_QMessageBox::staticSourceCompat() heuristically defines the
button expected to be triggered by Enter. On Linux/KDE, it would pass,
when the wrong button was fired.
=> Always "close" the focus chain, by linking the last and first
buttons.
=> Make the default button the button box's focus proxy.
=> Change tst_QMessageBox::staticSourceCompat() to always expect No
being fired by Enter in a Yes/No box.
[ChangeLog][QtWidgets][QDialogButtonBox] Default button becomes
focus proxy of a QDialogButtonBox. This ensures that Enter triggers
the default button, instead of the first button in the layout.
Fixes: QTBUG-118489
Pick-to: 6.7 6.6 6.5
Change-Id: Ic626d3d0fe7ba8b924c21734332e98532f11c80e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test function casts QMessageBox::StandardButton variables to
integers, to pass them as arguments and verify expected buttons.
In case of a test failure, this makes it hard to figure out, why a test
was failing.
Add a local macro to cast int values back to the enum before calling
qCompare(). That way the enum keys will be displayed in the logs.
Task-number: QTBUG-118489
Pick-to: 6.7 6.6 6.5
Change-Id: I23e766d5026cff3e4775db56e58f808809709e4c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test was flaky, because of qWaitForWindowActive() after show().
It is not guaranteed, that a window has focus after show().
Use qWaitForWindowExposed() instead.
Task-number: QTBUG-118489
Pick-to: 6.7 6.6 6.5
Change-Id: I1eb8a73f2beafec00c4a6f6b34bfd36a8d6e4d93
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A call to QWidget::destroy() will end up in QWindow::destroy(), which
calls QWindow::setVisible(false).
A call to QWindow::setVisible(false) on a widget's window will under
normal circumstances end up in QWidgetPrivate::setVisible(), which in
turn recurses back into QWindowPrivate::setVisible(), via
QWidgetPrivate::hide_helper(), ensuring that the QWindow internal
state is updated, visibleChanged emitted, and show/hide events sent.
Durin QWidget::destroy() we end up in QWindow::destroy(), which calls
QWindow::setVisible(false), but in this case the widget no longer has
Qt::WA_WState_Created, so the hide_helper() call is skipped, and the
corresponding QWindow is not kept in the loop.
To work around this we could have checked for windowHandle() instead
of Qt::WA_WState_Created before calling hide_helper(), but that had
many other side effects, so we opt for a more targeted fix.
Pick-to: 6.7 6.6 6.5
Change-Id: I68f80e5f7df9ee811afcd274a7ee4de31a110da5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The tool tip content size uses an incorrect content margin, when it's
constructed. This content margin has been reset to correct value when
tool tip is positioned using placeTip(). But after that, the content
size not been recalculated.
This patch triggers updatesSize() to calculate content size with
updated content margin values.
Fixes: QTBUG-119752
Pick-to: 6.7 6.6 6.5
Change-Id: I454c8528505686f2724b897e4002f78f3049149a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We used to look through the event queue in QCoreApplication::postEvent,
and if we found an existing DeferredDelete event for the receiver we
would compress the two events into one.
This was changed in 99b89d30fa, as the
logic was causing O(n^2) for deleteLater, by using one of the bits
in QObjectData to track whether the object had already been deleted.
But it kept the logic for tracking this in QCoreApplication::postEvent,
and QCoreApplication::compressEvent would still do the work of deleting
the additional QDeferredDeleteEvents.
To avoid the unnecessary heap allocation of the QDeferredDeleteEvents
we can move the debouncing/compression to QObject::deleteLater().
We use the same mutex as in QCoreApplication::postEvent to guard
concurrent access to deleteLaterCalled.
A note has been added about the (preexisting) issue that the mutex
is not sufficient to prevent data races, as the deleteLaterCalled
flag is part of a bit-field, and we're not guarding any of our
other accesses to other bits.
As QDeferredDeleteEvents is private API, we can rely on no-one else
posting it than QObject::deleteLater(), which should be the case now
that tst_QApplication::sendPostedEvents() was fixed.
The documentation has been clarified as well. It's safe to call
deleteLater() more than once, but that's not _because_ other
pending events for the object are cleared. The latter behavior
is normal ~QObject() behavior. The documentation was probably
written at a point we didn't do any event compression at all
for QDeferredDeleteEvents.
Task-number: QTBUG-120124
Task-number: QTBUG-119918
Change-Id: I2a733095b7cb066ba494b1335aa40200c749cb0c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the commit of data to a model index result in that index getting
filtered out, then the editor will be removed as part of committing the
data, and the index that the editor is associated with becomes invalid.
The subsequent call to closeEditor() will find that the index for the
editor is no longer valid.
This should not warn, and it should also not abort the clean-up process
early. Instead, identify that the editor that we want to closed is
already hidden. In that case, skip the warning and most of the cleanup
process, and proceed directly to the EndEditHint handling further down.
Add a test that simulates the two scenarios where this can happen:
either the committing of data results in the index being filtered out
by the existing filter; or the filter changes while editing, and the
index being edited gets removed. In both cases, we don't want to see a
warning, and the state of the item view should be reset correctly.
Pick-to: 6.7 6.6 6.5
Fixes: QTBUG-115765
Change-Id: If247172fdac9a1a9279dae96c078d32553d4ee5d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: 🌴 Alexey Edelev 🌴 <alexey.edelev@qt.io>
When using QKeySequence::DeleteEndOfWord or
QKeySequence::DeleteStartOfWord in a QLineEdit with an existing
selection, the selection was ignored which resulted in unexpected
behavior (see bugreport). This is fixed by only setting the selection
if none exists yet.
To prevent an entry in the history when the input is empty, the
selection is checked before calling del().
Fixes: QTBUG-120006
Pick-to: 6.7 6.6 6.5
Change-Id: I2e803c5eff1f0e289e93a77c58ecd78299241da7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A splash screen is usually shown during initialization, before the main
window is shown. At that point, an application might not spin an event
loop. The documentation therefore recommends to run processEvents()
periodically, in order to ensure that the splash screen is actually
shown. Async window managers (e.g. XCB) might require more than one call
to processEvents() for the splash screen to be shown. It can't be
guaranteed, that a specific number of calls to processEvents() make the
splash screen visible. Calls to processEvents() are not considered
good practice in application code.
QSplashScreen::finish() uses a copy of QTest::qWaitForWindowExposed(),
to automatically close the splash screen, when the main window is
shown.
=> Re-write the static inline waitForWindowExposed to wait for the
widget's windowHandle()->isVisible(). That ensures visibility to the
window system.
The previous version waited for isExposed() to become true. That
ensured exposure to the application, but not visibility.
=> Intercept QEvent::Show and process events, until the splash screen
becomes visible.
=> Remove references to processEvents() as a requirement to show the
splash screen from the documentation. It remains a requirement for
processing mouse and keyboard events.
=> Re-activate tst_QSplashScreen and test visibility in the constructor
test function.
Drive by:
- implement switch in event override
- factor out paint event handling in a function
- update documentation about calling processEvents() to enable mouse
handling.
Fixes: QTBUG-119225
Pick-to: 6.7 6.6 6.5
Change-Id: I07910705246b4e3234e01cc4896f5bc4b2c56772
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amends 32edae5e26, after which we keep a
copy of the restored state if the state couldn't be applied yet. Since
making a copy of the entire state results in multiple copies of layout
item pointers, we might end up with dangling pointers if the layout
structure is modified while we keep the copy. This can happen if methods
such as tabifyDockWidgets or splitDockWidget get called; e.g. tabifying
dock widgets will destroy the layout items that were added for them.
Unfortunately, the layout items do not have a pointer back to the layout
they live in, and the items in the stored state might not yet live in a
layout anyway. So we cannot remove the items from their layout in a
QDockWidgetItem destructor implementation.
Instead, we have to forget the stored state. Add a helper function that
writes the stored state back to the actual state, and deletes the stored
state afterwards. Call this function when the layout might get modified
programmatically.
Add a test case that reproduces the crash without the fix, and passes
with the patch.
Fixes: QTBUG-120025
Pick-to: 6.7 6.6 6.5
Change-Id: I8f7e886f3c4ac38e25f9b8bc194eea0833e5974f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Running the test case leads to multiple calls to show the software
keyboard, which due to Android QPA implementation leads to the
keyboard being shown during subsequent test cases, leading to
random failures. Skip it temporarily on Android until the
Android QPA implementation is fixed.
Task-number: QTBUG-119574
Change-Id: I29f234fe08cb33358cb5cb0f8e51b1cc0f8e8906
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
grabWindow() currently returns a null QPixmap on Android due to even
raster windows being backed up by OpenGL/QRhi. The test case uses
grabWindow() internally to grab contents to a pixmap and comparing
whether the pixmap contents are as expected, leading now to failures
due to null QPixmap being returned.
Task-number: QTBUG-118849
Change-Id: I51cda2d43fe482252d5604f6b18281d810aa4d2f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The previous attempt to fix this bug did not work out well since it
tried too hard to avoid double calculations. Therefore restore the old
behavior and fix makeVisible() instead.
This amends 1082038bd8
Pick-to: 6.6 6.5
Fixes: QTBUG-119366
Change-Id: I738a3cd3537ecf0983480d2f961f45f81d101bd9
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Remove the following CIs from BLACKLIST files as they are no longer
used:
- msvc-2015
- msvc-2017
- windows-7sp1
- opensuse-42.3
- ubuntu 16.04/18.04/20.04
- rhel 6.6/7.4/7.6
- redhatenterpriselinuxworkstation-6.6
Change-Id: Ief9550e3455a1ed211d978933262c8d5557b0fec
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
EGLFS doesn't allow resizing on top window. These testcases pass on CI, as "eglfs" is not tested, only "offscreen".
Task-number: QTBUG-115777
Change-Id: I6fb09c93e1863b2c9ed9e122078761e6b6e64889
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This change is required when running in real hw with eglfs backend. It passed on CI because CI used "offscreen" backend and eglfs is not tested on CI at the moment.
Task-number: QTBUG-115777
Change-Id: I4bbfbedcbe21c5c2041be9bdb8ae370156bb6200
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It passes locally, let's give it a shot in the CI.
Fixes: QTBUG-24318
Change-Id: I7df735bdc7963c9c1a8ad8befdc0642f796c32a1
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In the test, we compare the position of the cursor after making a selection.
The behavior in Windows, QNX and VxWorks is different than usual - they do not jump to the beginning of the selection.
It is configured in the unselectingWithLeftOrRightChangesCursorPosition() function.
Task-number: QTBUG-115777
Change-Id: Ibb721be123bb04aac957f23d468920edcac8fbc4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There's no point to the file if it has no content.
Change-Id: Ie0deb59a63d5f7a654fcab1218e0a814710072ff
Reviewed-by: Jason McDonald <macadder1@gmail.com>
When changing the tab position, the scroll offset is calculated wrongly
because the calculation is done before the size of the tabbar is
recalculated. Therefore wait until QTabBar gets the resize event and
calculate the new tab positions there.
Pick-to: 6.6 6.5
Fixes: QTBUG-119366
Change-Id: I261a91bb584409b9b0dac4339a32894f47540bcf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QComboBox in non-editable mode passes all keyboard input to the internal
item search. This was done regardless if the character is printable or
not and therefore e.g. '\t' composed by Key_Tab + ControlModifier was
accepted and not passed to the parent (in the bug report to the
QTabWidget which could not switch tabs due to that).
Pick-to: 6.6 6.5
Fixes: QTBUG-118605
Change-Id: If39423587460a70231c735df4912b72c5ae77475
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A floating dock widget could either be a single QDockWidget object,
or a QDockWidgetGroupWindow with a single QDockWidget child.
The former could be dropped on the latter. Dropping the latter on
the former caused a crash.
The existence of QDockWidgetGroupWindows with a single dock widget
child was accepted to be by design.
Previous fixes, such as 9ff40b59da,
attempted to wrap all single floating dock widgets in
QDockWidgetGroupWindows.
These attempts fell short, because of the manifold programmatic and
manual options to create a floating dock widget:
- drag a single dock widget out of a main window dock area
- drag a dock widget out of a tab bar on the main window
- drag a dock widget out of a floating tab
- call `QDockWidget::setFloating(true)` in any situation
- create a new QDockWidget, that floats from the beginning
Whenever a QDockWidgetGroupWindow with a single QDockWidget child
was hovered and/or dropped on a QDockWidget without a group window,
crashes or screen artifacts were observed. Previous fixes made them
occur less often.
QDockWidgetGroupWindow is not designed to hold a single QDockWidget
child. Such a state is inconsistent and may only exist, while a
QDockWidgetGroupWindow is constructed.
The reason why such invalid QDockWidgetGroupWindows started to exist,
is a bool trap: QDockWidgetPrivate::mouseMoveEvent() starts a drag
operation, when a dock widget is moved by mouse.
It called startDrag() with no argument, which defaulted to
startDrag(true) and caused a group drag.
This assumption is
*correct*, when a tabbed group of dock widgets is dragged out of the
main dock as a whole, to become floating tabs.
*wrong*, when a single dock widget is dragged out of a docked group,
to become a single floating dock widget.
In the second case, the dock widget was wrapped in a new, floating,
invisible QDockWidgetGroupWindow. Looking like a single, floating dock
widget, the group window caused a crash, when attempted to be dropped
on another dock widget.
This patch eliminates all cases, where a QDockWidgetGroupWindow with
a single QDockWidget is created:
(1) Implement QDockWidgetPrivate::isTabbed().
This enables mouseMoveEvent to determine, whether the move relates to a
group of tabbed dock widgets, or to a single dock widget.
startDrag() can therefore be called with the right argument. It will no
longer create a QDockWidgetGroupWindow with a single QDockWidget child.
(2) Change QMainWindowTabBar::mouseReleaseEvent
When a dock widget was dragged out of a tab bar and became a single,
floating dock widget, it was still parented to the group window.
That is wrong, because it has no more relationship with that group
window.
=> Reparent it to the main window, just like any other single floating
dock widget. That enables QDockWidgetGroupWindow to detect, that the
2nd last child has gone and no more group window is needed (see next
point).
(3) React to reparenting, closing and deleting
If the second last dock widget in a floating tab gets closed (manually
or programmatically), reparented or deleted, also unplug the last one
and remove the group window.
(4) Amend 9ff40b59da
Remove the code path where a QDockWidgetGroupWindow with a single
QDockWidget child was created 'just in case', to make it compatible
others, created by (1), (2) or (3).
(5) Change QMainWindowLayout::hover()
When the hover ends without a successful drop and a temporary group
window with a single dock widget child has been created, remove the
group window.
The patch fixes smaller inconsistencies, which have not become visible
due to assertions and crashes earlier in the chain.
The patch finally extends tst_QDockWidget, to cover all 4 cases.
- Creation of floating tabs
The creation of floating tabs is extracted from floatingTabs() to
the helper function createFloatingTabs(). In addition to creating
floating tabs, the helper verifies that dragging a dock widget out
of the main window doesn't accidently wrap it in a group window.
This covers case (1).
- tst_QDockWidget::floatingTabs()
The test function verifies now, that both test dock widgets have the
same path before plugging them together and after unplugging them from
the floating tab. This covers case(4).
- tst_QDockwidget::deleteFloatingTabWithSingleDockWidget()
This test function is added, to cover cases (2) and (3).
- tst_QDockWidget::hoverWithoutDrop()
This test function hovers two floating dock widgets hover each other,
and returns the moved dock widget to its origin before releasing the
mouse. This covers case(5).
This fixes a lot of long standing bugs, making the author of this patch
modestly happy :-)
Fixes: QTBUG-118223
Fixes: QTBUG-99136
Fixes: QTBUG-118578
Fixes: QTBUG-118579
Fixes: QTBUG-56799
Fixes: QTBUG-35736
Fixes: QTBUG-63448
Fixes: QTBUG-88329
Fixes: QTBUG-88157
Fixes: QTBUG-94097
Fixes: QTBUG-44540
Fixes: QTBUG-53808
Fixes: QTBUG-72915
Fixes: QTBUG-53438
Found-by: Keith Kyzivat <keith.kyzivat@qt.io>
Found-by: Frederic Lefebvre <frederic.lefebvre@qt.io>
Pick-to: 6.6 6.5
Change-Id: I51b5f9e40cb2dbe55fb14d769541067730538463
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test function was temporarily blacklisted on Ubuntu, but also
failing on other Linux platforms (e.g. openSuSE).
It tested, whether closing all dock widgets and the main window, would
close the application as well. It used one single shot timer, to close
the windows and later one to check, whether the application was shut
down.
While that mechanism must work in an application environment, it is not
guaranteed to work in testlib. More specifically, I could happen that
the XCB / glib event loop continued to spin and wait for events.
=> Check the signal QGuiApplication::lastWindowClosed() instead. If the
signal is fired, it is proven that all windows have been closed and
the application would quit in a production environment.
The underlying test case was: Application didn't quit with the last
dock widget closed, because there was a dangling
QDockWidgetGroupWindow.
=> finally: Clean up BLACKLIST
Pick-to: 6.6 6.5
Change-Id: Ic5fde5967fc8dde70ab64dc30cc7367c908b5c51
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is somewhat of a corner case, where there is a single sub-window,
setViewMode(TabbedView) is called before addSubWindow(), and the latter
is called before show(). The sub-window would be active, i.e.
subwindow->d_func()->isActive is true and QMdiArea::aboutToActivate() is
emitted, but QMA::emitSubWindowActivated() is never called for that
sub-window, resulting in that sub-window shown as
unmaximized/with-a-title-bar instead of as maximized/tabbed as is
expected in TabbedView.
Pick-to: 6.6 6.5
Fixes: QTBUG-114188
Change-Id: Ia7b2cfd07c51867707866a1f99f70129bbdc0e3e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QDial::bound() is crashing when min == max due to a division by zero.
Therefore check for this condition beforehand and return min.
Pick-to: 6.6 6.5 6.2 5.15
Fixes: QTBUG-104641
Change-Id: I612625af1ad18333d59a7771abfdec602301b58e
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Even a tab was hidden it could be accessed with the key navigation or
a scroll event which lead to painting artifacts.
Pick-to: 6.6 6.5 5.15
Fixes: QTBUG-101219
Task-number: QTBUG-63038
Change-Id: I58be694eef5f86cccecbe528891a39a4acdda15f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
If we use 'this' as context it might still try to invoke
the timer after we have left the function, leading to
stack-use-after-return.
To avoid doing an in-depth dive if it's okay to use mainWindow as the
context or not, I just added a new local QObject.
Amends 9ff40b59da
Pick-to: 6.6 6.5
Change-Id: I2c3bdc1eb06731d9c38979610303876c2748fb73
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We now call setDefaultSectionSize with the new default section size.
This clamps the value to min/max section size and it will resize
affected sections.
Pick-to: 6.5 6.6
Fixes: QTBUG-116013
Change-Id: I39849aca8d0672629ce0b3ca244038c27e045d4b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reimplement the virtual function QIconEngine::isNull() for
QPixmapIconEngine. This lets QIcon::isNull() return true when no pixmaps
are loaded during QIcon::addFile() e.g. due to a wrong filename.
Pick-to: 6.6 6.5
Fixes: QTBUG-118667
Change-Id: I29f2c492e55b60638507fa398ef7af76f4e9ff48
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QCheckBox::checkStateChanged() was emitted with msvc even though the
check state was not changed due to a faulty comparison.
Amends: 37b47ebf94
Pick-to: 6.6
Fixes: QTBUG-118716
Task-number: QTBUG-104688
Change-Id: Iafeabeb9214f6c7510ea4ed87fabb7dc0ba175a6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It relies on moving the mouse, which is likely related to this
failing in CI.
Pick-to: 6.6 6.5 6.2
Change-Id: Ib4a3ba7a9e874c9c2ef2d6d16143adf072e47588
Reviewed-by: Jøger Hansegård <joger.hansegard@qt.io>
Reviewed-by: Artem Dyomin <artem.dyomin@qt.io>
It was already blacklisted for macOS 13, and has also been blacklisted
on macOS many times in the past.
See also a9005a70d5.
Pick-to: 6.6 6.5 6.2
Change-Id: I9dc87ef409dd1fcc0f47d5e776927e8912ab40e0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Factor out the four code paths for standardIcon() (windows, mac,
application and resource theme) and use those functions also for
standardPixmap() so the returned pixmap is correctly scaled with the
current devicePixelRatio.
Part 2: move functionality into own functions
Task-number: QTBUG-118122
Change-Id: I0763c4db9e7aecf4c52bf0f5770bd3dd87c4a8a4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
The tests are suitably #if-ed to be omitted once the property is gone,
but the compiler can still warn.
Change-Id: I20efcf9bb40fe6d7ad7e21b64e5400f71c0a0b15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDialogButtonBox has logic to automatically resolve a default button,
in case one is not already set via QPushButton directly, or via e.g.
QMessageBox::setDefaultButton().
Unfortunately, this default button can in some cases be overridden by
the first button in the dialog button box. The reason this happens
is that the first button is the focus proxy of the button box, so
when the button box gains focus, it will transfer it to the first
button. And since QPushButtons inside a QDialog have their autoDefault
property set to true by default, this focus transfer will also reset
the default button to the focused button.
This arbitrarily happens for any role that happens to be earlier in
the QDialogButtonBox::ButtonLayout than the AcceptRole, and can be
very confusing for the user, so we try to avoid the situation by
explicitly setting the automatic default button as the focus
widget of the button box, unless one is set already.
This is also what QMessageBox::setDefaultButton() does internally.
The only case we're not covering is when the user sets a push button
as default via QPushButton::setDefault(), but we conservatively
assume that the user then also calls setFocus() on the button.
Pick-to: 6.5 6.6
Change-Id: Ibdac0a51ba9439321d4fd7a1dac1ed695e11d693
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This shall ultimately replace its timeSpec property, which had already
been turned into a derived property of an internal timezone.
[ChangeLog][QWidget][QDateTimeEdit] Added timeZone property to enable
a datetime edit widget to control the timezone used. This makes the
timeSpec property redundant; this old property shall be deprecated
from 6.10.
Fixes: QTBUG-80417
Change-Id: I3cdb686bd2dada0e5067f5b4c1828b73892e424a
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
If a QShortcut is registered with a QWindow as its parent, but QApplication
is used, we end up in QApplicationPrivate::createShortcutPrivate(), and
create a QtWidgetsShortcutPrivate that implements shortcut context matching
via qWidgetShortcutContextMatcher.
The problem is that qWidgetShortcutContextMatcher expects the windows
to be QWidgetWindows, which meant that plain QWindow based shortcuts
would always fail.
This can happen for example if a QApplication is used in Qt Quick
to provide dialog fallbacks, but QShortcuts are otherwise used
with plain QWindows, or QQuickWindows e.g.
We now defer the check of whether there's an active (widget) window,
and fall back to QtGui's simpleContextMatcher in case we don't find
a QWidget, QAction, or QGraphicsWidget shortcut owner to handle
the matching for.
Note: We don't support shortcut matching for QAction in QtGui,
but this is left for another day. There is also a discrepancy
between how QtGui and QtWidgets handles Qt::ApplicationShortcut.
The former will treat it as a match even if there is no active
QWindow, while the latter requires that there's an active widget
window.
Fixes: QTBUG-116221
Change-Id: I487995f2e660a40f6556828b84a521d81a58f1b6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When a dock widget is closed while floating, it still reports being
floating even though the QWidget::windowHandle()->isVisible() returns
false. This is documented behavior and will not be changed.
c153066baa relied on the isFloating() to
return false, if the dock widget is closed. When the window title was
changed by setWindowTitle(), the change was overridden by reading the
old value from the window handle.
=> Amend the patch and add a windowHandle()->isVisible() as a condition.
In c153066baa, an autotest for the title
propagation (QTBUG-113591) was added to floatingTabs().
=> Harden the setWindowTitle() test function. Move the tests related to
QTBUG-113591 and QTBUG-117764 to this function.
Fixes: QTBUG-117764
Pick-to: 6.6 6.5
Change-Id: Id37a9a22d4d13abad4ea55c74ea4e834bdb2bfab
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
QItemDelegate was superseded since Qt4 by QStyledItemDelegate but it
took until Qt6.7 to remove the last occurrences in qtbase.
- remove unused includes / replace with qabstractitemdelegate.h
- replace references in the documentation with QStyledItemDelegate
- adjust the examples and tests to use QStyledItemDelegate
Pick-to: 6.5 6.6
Change-Id: I246755004ce2d01192a726ca0972106c237df0cc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
On some xcb platforms the xcb_configure_notify_event_t is sent after the
window is fully exposed which leads to a wrong position for
QWidget::mapToGlobal() which makes the test fail.
Fix it by waiting for a move event with a position != 0,0 before
starting the drag'n'drop operation.
Fixes: QTBUG-94250
Change-Id: If91a15815205ba9dcea36248d9de03ed0a7e5822
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Add a testcase to make sure the signals for moveing rows are properly
connected from the model to the corresponding QHeaderView slots.
Task-number: QTBUG-117698
Pick-to: 6.6 6.5
Change-Id: I354f8836d3de58a8bf51da7a8c0859a673ec9339
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Fix runtime warnings about testdata with the same name.
Pick-to: 6.6 6.5
Change-Id: I5d4927cc53be3e08a524498db42a8a08396ced8e
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QlistWidgets with sorting enabled do not sort stable. A re-sort is
triggered when any Qt::ItemDataRole is changed and not only when
Qt::DisplayRole is changed. Due to an unstable optimization, the changed
element gets inserted at the beginning of their respective "equivalence
group".
This patch disables the optimization and ensures stable sorting
with std::stable_sort. Sorting is only performed, if the subset of
changed items in the range [begin, end] is not already sorted in the
whole list. For this purpose, it is assumed that the list has already been sorted before begin and after end. This assumption minimizes the subset to check.
Limits / side effect:
The patch focuses on the most common use case, which is a single item being changed. Replacing the optimization by std:stable_sort can potentially slow down the sorting performance of large data sets.
Task-number: QTBUG-113123
Pick-to: 6.5 6.6
Change-Id: Ib2bd08f21422eb7d6aeff7cdd6a91be7114ebcba
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QAbstractItemView installs the delegate as an event filter on the
editor, so the delegate will get the focusOut event (and other
events) before the editor does. QAbstractItemDelegate will then
emit commitData, signaling that the "updated" data should be
written back to the model.
In the case where the editor of a delegate (QAbstractItemDelegate)
is a QSpinBox with keyboardTracking set to false, the value of
the spinbox won't be updated while typing, but only when the
spinbox's text edit focus is lost. In this case, the delegate's
commitData will be emitted before the spinbox has had a chance
to update the value in its handling of the focusOut event.
To fix, make sure to update the value before the data is
committed to the model in the delegate's tryFixup method.
Fixes: QTBUG-116926
Pick-to: 6.5 6.6
Change-Id: I68540964342407d23387e4404a0fe3f00d80eb5f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Axel Spoerl
Volker Hilsheimer
Tor Arne Vestbø
Santhosh Kumar
Johannes Grunenberg
Tinja Paavoseppä
Christian Ehrlicher
Marcin Zdunek
Jacek Poplawski
Edward Welbourne
Ahmad Samir
Assam Boudjelthia
Mårten Nordheim
Jonas Karlsson
Edward Welbourne
Wladimir Leuschner
Doris Verria