We know that the QAbstractSocketPrivate::canReadNotification() slot is
called by the engine's read notifier only when new data is available for
reading, or when the socket has been closed. This allows us to remove
additional checks for engine validity and data availability for unbuffered
sockets.
Change-Id: Ic278cf2214d418d8fe471ea24a765b8d5840b0a5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractSocketPrivate::readFromSocket() had a qDebug() that
references its q->... so it also needs its Q_Q() declaration.
Only relevant when QABSTRACTSOCKET_DEBUG is enabled (which it
normally isn't).
Change-Id: Ib82fd032fb2c4143a0987b9162377d0d7e968e95
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After calling connectToHost(), the socket enters HostLookup state. At this
stage, the socket engine was not created yet, and writing to the socket
should result in either data buffering or an error. So, add a check for
d->socketEngine to prevent a crash on unbuffered sockets.
Task-number: QTBUG-48356
Change-Id: I15ea9ce7de97ce6d7e13e358eca5350745b556bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
It was dereferenced 8 lines before and the pointer cannot have changed
since.
Found by Coverity, CID 11363.
Change-Id: I42e7ef1a481840699a8dffff1407ecab4e4f5930
Reviewed-by: Richard J. Moore <rich@kde.org>
Introduce the methods setError(), setErrorAndEmit() to consistently
set the internal error state.
Change-Id: I4ff951d100cf5e9f9a7e27135bb52188cde99853
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was a small amount of time between the last readDatagram() call
and disabling a read notifier in case the socket had a pending
datagram. If a new datagram arrived in this period, this qualified as
absence of a datagram reader. Do not change the read notifier state
because it is disabled on canReadNotification() entry and always enabled
by the datagram reader.
Thanks to Peter Seiderer, who investigated the same: "Querying
hasPendingDatagrams() for enabling/disabling setReadNotificationEnabled()
is racy (a new datagram could arrive after readDatagam() is called and
before hasPendingDatagrams() is checked). But for unbuffered sockets the
ReadNotification is already disabled before the readReady signal is
emitted and should be re-enabled when calling read() or readDatagram()
from the user."
However, this patch does not completely solve the problem under Windows,
as the socket notifier may emit spurious notifications.
Task-number: QTBUG-46552
Change-Id: If7295d53ae2c788c39e86303502f38135c4d6180
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Internal write buffer may have multiple blocks of data which wait a
transmission. In this case, ensuring a single write() is not enough to
flush the buffer completely. Allow several attempts that aim to write
as much as possible data from the buffer to the underlying network
socket.
Change-Id: I34b5ec65abe42853906168cdb05f793bd51162ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractSocket already prevents from the recursive readyRead()
emission in canReadNotification(). Follow this behavior in case the
socket receives a close notification.
Change-Id: Ifd916d60252832c19e0dcdeaa8dde8af75b45cf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A buffered TCP socket might be open only for writing purpose. As a
possible use case of the API, this patch avoids accumulation of
unwanted data in the internal read buffer.
Change-Id: I2759c1e04968d24e2ae71f3eca05e7e560cd8a41
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise errorString() might not match error() in a
statusChanged handler.
Change-Id: If1250b4552412eabe88457dee031e4ef3f533838
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These checks are implemented in QIODevice::atEnd().
Change-Id: I056f05a59e2422ecbe7470557cb4ba03d98e5e45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Contents of the QIODevice's buffer is handled in the base
implementation.
Change-Id: I5a3d68e4e8dcb16d7f5ad695ac43127b8047a061
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a fix-up for cff39fba10.
That patch lead to some internal state issues that lead to the QTBUG-47048
or to QNetworkReply objects erroring with "Connection Closed" when
the server closed the Keep-Alive connection.
This patch changes the QNAM socket slot connections to be DirectConnection.
We don't close the socket anymore in slots where it is anyway in a closed state
afterwards. This prevents event/stack recursions.
We also flush QSslSocket/QTcpSocket receive buffers when receiving a disconnect
so that the developer always gets the full decrypted data from the buffers.
[ChangeLog][QtNetwork] Fix HTTP issues with "Unknown Error" and "Connection Closed"
[ChangeLog][QtNetwork][Sockets] Read OS/encrypted read buffers when connection
closed by server.
Change-Id: Ib4d6a2d0d988317e3a5356f36e8dbcee4590beed
Task-number: QTBUG-47048
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Some kinds of socket options can be applied only to newly created
descriptors. However, a current QAbstractSocket implementation proceeds
to actions immediately after the socket layer initialization. This
disallows a socket tuning in further inheritance.
Add a private virtual configureCreatedSocket() method that gives an
ability to set the socket options before binding or connecting.
Change-Id: I2d858a400cd46ae7fe5bf0b8900220f6121d0132
Reviewed-by: Richard J. Moore <rich@kde.org>
According to I/O API, QIODevice and its inherited classes should be
able to process a full 64-bit offsets and lengths. This requires
64-bit parameters in operations with internal buffers. Rework
QRingBuffer to avoid implicit truncation of numbers and fix some
64-bit issues in code.
Change-Id: Iadd6fd5fefd2d64e6c084e2feebb4dc2d6df66de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The same qt_timeout_value function was copied 5 times in qtbase's code,
so provide a common implementation in QIoDevice that can be used by
everyone.
This commit also corrects the remaining time calculation in
QProcess::waitForBytesWritten and QProcess::waitForFinished by using
this new function.
For QProcess::waitForFinished, if the process started within almost exactly
the timeout time passed to waitForFinished, msecs - stopWatch.elapsed() would
be -1, which is a special value.
Change-Id: I7b76ee6bae695eafdd02e3db03e2ff1e23a7f40c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This has been known to be broken for a while. Now it works: you can bind
and you'll retain the port (and the file descriptor) for the connect
call. Incidentally, in fixing the binding for more than one IP for the
hostname (with event loop), this commit fixes the setSocketDescriptor
XFAIL.
[ChangeLog][QtNetwork] Fixed a bug that caused both QTcpSocket and
QUdpSocket to close the socket and lose any bound ports before
connecting. Now bind()/setSocketDescriptor() followed by connect() will
retain the original file descriptor.
Task-number: QTBUG-26538
Change-Id: I691caed7e8fd16a9cf687b5995afbf3006bf453a
Reviewed-by: Richard J. Moore <rich@kde.org>
Use the
QDebugStateSaver saver(debug);
debug.resetFormat().nospace();
idiom to unify the formatting and whitespace handling.
Change-Id: Id346d63b3f589b60ca19e4459271d587f1a0c003
Reviewed-by: Richard J. Moore <rich@kde.org>
QAbstractSocket::close() always calls QIODevice::close(), which resets
QIODevice's internal read buffer. So it makes no sense to make same calls
from disconnectFromHost(). This made the closeCalled private member
superfluous.
Change-Id: I4ec64e9711490e44e737763e4ed7fb41bffe2556
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
The documentation says that QUdpSocket emits readyRead() only for one
datagram and that if you don't read it, the class will not emit again.
That should be implemented by disabling of the socket notifier once we
have the datagram already read, but was broken.
In turn, that breakage caused a live-lock of the event loop: since we
didn't disable the notifier nor read the pending datagram, the event
loop would fire every time for the same datagram.
The re-enabling of the notifier was already working.
Task-number: QTBUG-43857
Change-Id: Ic5d393bfd36e48a193fcffff13bb32ad390b5fe8
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The keepalive socket can only be set if the socket is not connected
(see
http://msdn.microsoft.com/en-us/library/ie/windows.networking.sockets.streamsocketcontrol.keepalive)
Task-number: QTBUG-38623
Change-Id: Ia40dc66f071a8109538e4be7a8f420de81d5be8d
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@theqtcompany.com>
Remove an useless check which spontaneously allow direct reads from the
socket engine.
Change-Id: Ia3d2a572d6f1563d613fe2f00d0d6849df259827
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have to document because we don't know how to fix the bug and don't
know when they will be fixed. We should also disable the unit tests
related to those functions, as they probably cause CI instability.
Task-number: QTBUG-24451
Change-Id: I0e60682ec4af7570258b13735339051ba8f4a6e4
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Some calls pass len=32, so garbage was shown when maxlen (readBytes) is smaller.
Change-Id: I97e61dcdf5a0db032317c57afb4bfb406437d8d5
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
This restores behavior for UDP sockets as it was in 5.2.1. Change
13c246ee11 introduced a behavioral
change / regression in that respect.
Task-number: QTBUG-37489
Change-Id: I8f0b26d763dd66ea6edcc343e91ff5c9c7bdc0f2
Reviewed-by: Richard J. Moore <rich@kde.org>
Change-Id: I213ac1fb2733e675f3641441fe6c621bab06c1f0
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Otherwise we would get
qabstractsocket.cpp:2224:24: error: unknown escape sequence: '\c' [-Werror]
Change-Id: I757ff2aa1c46bbba7f0c0b93f49c2f9d84927b19
Reviewed-by: Richard J. Moore <rich@kde.org>
Added calls to clear the write and read buffers when
- setSocketDescriptor is called
- abort is called
Removed clears the read and write buffers from
the documentation of resetSocketLayer.
Added documentation to setSocketDescriptor
describing that read and write buffers are cleared.
Task-number: QTBUG-28914
Change-Id: I25a4b679708bdea0b259c50f1d10a3e9271dabb9
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Added functionality to set SO_SNDBUF and SO_RCVBUF
socket options on QAbstractSocket.
Task-number: QTBUG-34934
Change-Id: I2134fb462d43b9111c039cd7e7d36bd78eafd8bc
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
In a slot connected to readyRead, if the app detects that the
buffer size is too small and increases it, it expects that
readyRead() will be emitted again.
setReadBufferSize() doesn't re-enable the socket notifier when
calling from within readyRead, and readyRead itself was missing
the code to do it.
Change-Id: Ia00a3066ad3ba09d5cfae0716adc5691ae96c3fa
Done-with: Thiago
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Default values should have mark-up to denote that they are code.
This commit changes:
-"property is true" to "property is \c true".
-"Returns true" to "Returns \c true".
-"property is false" to "property is \c false".
-"returns true" to "returns \c true".
-"returns false" to "returns \c false".
src/3rdparty and non-documentation instances were ignored.
Task-number: QTBUG-33360
Change-Id: Ie87eaa57af947caa1230602b61c5c46292a4cf4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
The signal has nothing to do with any action on the remote side. It is
emitted when the class has written the bytes to the operating system.
More likely than not, the bytes have not been even sent yet, much less
read by the other side.
Change-Id: Ia04d37ffc8c0788173d3d29f49c5759bcdef6afa
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
According to Qt doc, "Network proxy is not used if the address used in
connectToHost(), bind() or listen() is equivalent to
QHostAddress::LocalHost or QHostAddress::LocalHostIPv6. This is not the
case in current implementation.
Change-Id: I6b8a40c1e8bd8aad9504d8f939b87eda6e93337c
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
We need to handle FD_CLOSE separately on Windows as this will be sent
only once. When we get FD_CLOSE we need to check if there is more data
available for reading. It there is this might indicate that there is
another FD_READ that we need to handle after the FD_CLOSE. So in this
case we will manually create another close event.
Task-number: QTBUG-19409
Task-number: QTBUG-25386
Change-Id: Ie19906bc3f64fb6a85a508a5ab12caac5d70ccdb
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This is needed for the QSslSocket. When we read on that socket we will
only read from the QIODevice buffer to get the unencrypted data.
So when the readNotifier has been turned off on the plainsocket there
is nothing to trigger it to be turned on again.
This will add a readData with zero size when we have read everything
from the buffer. This is so that we get a call into the socket to
check if the readNotifier should be turned on again.
Change-Id: I3b63e33de007db823e964480903186eb1b8caac2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removes the readBuffer from the QAbstractSocket since data is already
buffered in the QIODevice.
Change-Id: I4e50b791fd2852455e526fa2c07089d4d3f0b2a4
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling a static function non statically causes an unused variable
warning for the optimised away d pointer.
sscanf causes an insecure functions warning. (Even though it was used
safely in this case)
Change-Id: I07700e2155284ef3ebbe7d604ed59b2e61ee7f95
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Ensure comma between elements (757 missing), single space and curly-
braces around title elements, etc.
Change-Id: Id16c3fda7fc47a12a0682f8720214f4990609a97
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
This change moves the snippets and imagesto the modularized directories.
Change-Id: If14912692a7f72d7de345eaf88d9ec9752310fca
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Although we created an enum for pause modes to make 5.x binary
compatible with 5.0, the enum value is not well named.
In 5.1, we propose to add PauseOnProxyAuthentication to the enum.
PauseOnNotify is not clear what it means, while PauseOnSslErrors is.
Any new notification in a minor release would need a new enum value
otherwise applications would get pauses they did not expect.
Task-number: QTBUG-19032
Change-Id: I4dbb7467663b37ca7f0551d24a31bc013968bedc
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
If the current host name is an ip address we can create the QHostInfo
directly instead of performing a reverse lookup.
Task-number: QTBUG-18881
Change-Id: If239481e455f4f7fb74d978f685dc5d8e9f22c0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
When binding with the DefaultForPlatform bindmode, then don't set
options on the socket related to sharability, leave them at the
platform default.
This restores compatiblity with Qt 4
Change-Id: I612a3acb976f08446b4eef03ccdcdf84b3477c3c
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
QDoc now has support for Doxygen style commands for italics, bold
and list items. This change applies that change in QDoc to the
actual documentation.
Task-number: QTBUG-24578
Change-Id: I519bf9c29b14092e3ab6067612f42bf749eeedf5
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
Create new QAbstractSocket::SocketError value that denotes a error in
the SSL library: SslInternalError
Create QAbstractSocket::SocketError value that denotes a error in data
provided by user cauding an SSL library error: SslInvalidUserDataError
Change-Id: I466a9389d9d7052efd8eddd1a2d6067ba26dfddb
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
The debug message could derefence a null pointer, this crashed when
running ssl autotests
Change-Id: I176aaa9f3cf3c6cc1512cdc34db06d4c79f92e73
Reviewed-by: Richard J. Moore <rich@kde.org>
The intention is to add additional pause modes over time, this will
be easier if we can just test if a particular reason for pausing is
turned on. If we don't do this we'll end up having to check for each
enum value every time we check what is enabled.
Change-Id: I6b08f0e819b5593e3f6463c3dd175eff8625e155
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
pause and resume is currently only supported upon emitting the
QSslSocket::sslErrors() signal. The API was added in QAbstractSocket to
also support QAbstractSocket::proxyAuthenticationRequired() in the
future.
This is the first patch to support that feature on the socket level,
another patch will follow to support sslErrors() and
authenticationRequired() in QNetworkAccessManager / QNetworkReply.
Task-number: QTBUG-19032
Change-Id: Ide2918268590ab9a01454ab26cb7fdca3dc840ab
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
The following methods have been made virtual:
setReadBufferSize()
socketDescriptor()
setSocketDescriptor()
socketOption()
setSocketOption()
waitForConnected()
waitForDisconnected()
Now that these methods are virtual we no longer need the nasty
polymorphism workarounds for QSslSocket.
Change-Id: I319989b6cdb025ba33d7d53ae90f3a6a3b6b1b7b
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In qdoc, the \value command is meant to document a single value of an
enum. e.g.
\value TypeOfService Text describing the type of service. It runs until
the next \value or a blank line.
Although it doesn't say you can't build a \table in the \value text,
it doesn't work. For now, the fix is to remove the \table from the
\value text and make the table separate from the enum \value list and
let the description of the \table refer to the value that it belongs
to.
Task-number: QTBUG-23599
Change-Id: I88b456dca419a565eece30ba20fe09c0bcd4d98d
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
All references to QFtp in documentation have been removed, QFtp's
documentaiton was marked internal. The QFtp example was removed.
Task-number: QTBUG-23199
Change-Id: Ifff83cac069fb350e8ebeae63e605850e65c0c30
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Windows x64 uses 64 bits integer for sockets, to ensure compatibility we
should use ptr sized integers for our socket descriptors.
Task-number: QTBUG-19004
Change-Id: I4b56023874a4f1bad107c66c054fecfedde33d88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This applies to both local and abstract sockets.
Task-number: QTBUG-22450
Change-Id: I5c58d68da95ffb6bcde5be510853359b288e5984
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Creates a new SocketOption called called TypeOfServiceOption that can be
used with the existing setSocketOption method to set the ToS byte in a
socket socket. This is done only for unix systems because windows
doesn't support directly setting the ToS/DSCP byte:
http://support.microsoft.com/kb/248611http://blogs.msdn.com/b/wndp/archive/2006/07/05/657196.aspx
Change-Id: Idf9da2dd8307ac7057982fbfdf9e4e9ebe366780
Task-number: QTBUG-6221
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
This property is no longer necessary because we can now set the user
agent directly on the proxy.
Task-number: QTBUG-17223
Change-Id: I27cb126dd401f02525290d2317650f55cae9f4ef
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Symbian is no longer a supported platform.
Change-Id: Ifcb2e05661b16acc6307a4ccfaa42586750734c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
This should be API-compatible with Qt 4, but is not ABI-compatible, due to
removing the enum from QUdpSocket.
Task-number: QTBUG-121
Change-Id: I967968c6cb6f96d3ab1d6300eadd5bde6154b300
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Various places in QtNetwork checked for Localhost or LocalHostIPv6,
i.e. 127.0.0.1 or ::1. By using the isLoopback API, other loopback
addresses are treated the same way (e.g. 127.0.0.2 and ::ffff:127.0.0.1)
Task-number: QTBUG-22246
Change-Id: I46f55630d8646fd68034a509969a0b7cb72ca77c
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
In the cases where a DNS lookup will give you both an IPv4 and IPv6
address, this will start two connection channels at the same time.
One trying to connect using IPv4 and one on IPv6. This is done so
that we can use the fastest one for the connection. To do this we
have to do the hostlookup in the connection. The result is then
in the cache for the individual socket so it will not need to do
another lookup.
Task-number: QTBUG-16458
Change-Id: I806c20168d9c5edc2831b80f82a2bd570b36d5fa
Reviewed-on: http://codereview.qt.nokia.com/1003
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Regression was introduced by 8d4cd52b6981a4e6deea7fdb77f56e40c4f3e6ba
when it failed to check when msecs == -1. This manifested visibly in KDE
failing to connect to any SSL site -- kioslaves are synchronous and use
waitForXXX(-1) (in this particular case, waitForEncrypted, which calls
waitForReadyRead).
Also, take the opportunity to convert these tests in QTcpSocket to use
port 80 (a defined service in the test server) instead of port 22.
Reviewed-by: Martin Petersson
(cherry picked from commit cb5b6799333794496269aa7e6515f96c2ac96d37)
Change-Id: I256a1e138e43fd45844976fe84cd2bc938552e47
Reviewed-on: http://codereview.qt.nokia.com/359
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
QAbstractSocketEngine::createSocketEngine can return 0 as well as throw.
In two cases the pointer was being used before the null check, in a 3rd
case the null check was missing.
Reviewed-by: Markus Goetz
(cherry picked from commit 19edac88af53eea7f733cabbaee77f9b725b7ea9)
Some proxies can discriminate based on the User-Agent when sent a
CONNECT command for establishing a HTTPS connection.
With this change, if the User-Agent header is set in the QNetworkRequest
then it will be passed to the http socket engine for use in the connect
command sent to the proxy.
As before, "Mozilla/5.0" will be used by default when no user agent
has been set.
Task-number: QTBUG-17223
Reviewed-by: Markus Goetz
Make sure that waitForReadyRead times out if the read buffer is full.
Task-number: QTBUG-16123
Reviewed-by: Peter Hartmann
(cherry picked from commit 8d4cd52b6981a4e6deea7fdb77f56e40c4f3e6ba)
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
Alex Trotsenko
Edward Welbourne
Liang Qi
Thiago Macieira
Kai Koehne
Oswald Buddenhagen
Markus Goetz
Nico Vertriest
Daniel Teske
Jani Heikkinen
Oliver Wolff
Matti Paaso
David Faure
Peter Hartmann
Kurt Pattyn
Frederik Gladhorn
Jerome Pasion
Jonas Gastal
Marcel Krems
Sergio Ahumada
Corentin Jabot
Jonas M. Gastal
Samuel Rødal
Iikka Eklund
Julien Brianceau
Martin Petersson
Mitch Curtis
Sergio Ahumada
Shane Kearns
Marius Storm-Olsen
Casper van Donderen
Richard Moore
Shane
Jonas M. Gastal
Jason McDonald
Peter Hartmann
Martin Smith
Robin Burchell
Markus Goetz
Thiago Macieira
Jyri Tahtela
Qt by Nokia