Replace public friend operators operator==(), operator!=() of
QBitArray to friend method comparesEqual() and
Q_DECLARE_EQUALITY_COMPARABLE macro.
Task-number: QTBUG-120304
Change-Id: I6b47111c144016b3aa05f01c8035c32d164291ad
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Unlike other containers, a QBitArray's size() is not limited by
storage, but, esp. on 32-bit platforms, its size_type: A INT_MAX
size() QBitArray only requires 256MiB of storage.
So we can't rely on "won't happen in practice" here and need to avoid
the potential UB (signed overflow) in the (d.size() * 8 - *d.data())
storage-to-logical-size calculation by using unsigned arithmetic.
Use the opportunity to Extract Method adjust_head_and_tail(),
centralizing the bit fiddling.
Pick-to: 6.7 6.6 6.5 6.2 5.15
Change-Id: I485eafdf3ce2087a81c683672ff98a43f97c9968
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Can't do it now, because this non-polymorphic class is exported
wholesale, so removing the SMFs would be BiC. But pre-program for
Qt 7, so we don't forget again.
Change-Id: I36420dbaeda53391d304cf6832167f6157c22e35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The mutable operator[] method was marked as inline only at the
definition, not the declaration. This is known to cause compilation
failures on MinGW when the function is used in other inline
implementation (cf. e.g. QTBUG-56459). It's not, atm, but fix the
issue proactively.
Pick-to: 6.7 6.6 6.5 6.2 5.15
Change-Id: If805122d9f8dbd72641173509c4b860c20fc1cdc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Because we may be able to use the other side's storage and apply the
operation in-place. We reuse the storage of the one that can be
detached: even if we have to grow the buffer, QBitArrays are usually
small so there's a good chance it's just to the extra space QArrayData
usually overallocates or a simple, non-moving realloc().
Disassembly with GCC 13 and Clang 17 show the vectorisers did kick in
for all four functions (inverted_inplace included). I think a
hand-rolled version could squeeze a few more cycles, especially in the
tail section, but I don't consider its maintenance cost to be worth it.
Pick-to: 6.7
Change-Id: I85b3fc2dd45c4693be13fffd1795bfb1b296caa6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Now that the assignment-bitwise operators can reuse storage, we can make
these operators also be capable of reusing storage.
Pick-to: 6.7
Change-Id: I85b3fc2dd45c4693be13fffd1795b893de65a5b8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Instead of creating a temporary copy of one of the two sides (which will
share QByteArray), create one with the correct target size such that it
is already detached.
Drive-by move them to hidden friends.
Pick-to: 6.7
Change-Id: I85b3fc2dd45c4693be13fffd1795b74eeaf3be71
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Which takes the array to be inverted by value, so we get free move
semantics and allowing us to perform the negation in-place.
[ChangeLog][Potentially Source-Incompatible Changes] The bitwise AND,
OR, XOR, and NOT operator functions on QBitArray are now hidden
friends. This may cause source-incompatibility in unusual coding styles
(like 'array.operator~()') or with classes that have a casting 'operator
QBitArray()'.
Change-Id: I85b3fc2dd45c4693be13fffd1795ba1fbaf23769
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This reduces the size of the header. I renamed the arguments for fill()
because "size" would shadow a member function.
Change-Id: I85b3fc2dd45c4693be13fffd1795b706b92e0965
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
GCC 13 has been complaining that QBitArray could be accessing past the
end of an array (specifically, the 1-element array QByteArray::_empty).
That's caused by the 'QByteArray::data() const' being:
#if QT5_NULL_STRINGS == 1
return d.data() ? d.data() : &_empty;
#else
return d.data();
#endif
A way to avoid this is to use operator[], which doesn't attempt to hide
null pointers (it has an assertion).
This is accomplished by writing nicer, more readable code, which is a
nice benefit.
Fixes: QTBUG-118631
Pick-to: 6.6
Change-Id: I85b3fc2dd45c4693be13fffd179579615a6ac98d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
All of those are implicitly-shared Qt data types whose copy constructors
can't throw and have wide contracts (there aren't even any assertions
for validity in any of them). These are all types with a QVariant
implicit constructor, except for QCborValue, which is updated on this
list so QJsonValue (which has a QVariant constructor) is also
legitimately noexcept.
To ensure we haven't made a mistake, the Private constructor checks
again.
Change-Id: I3859764fed084846bcb0fffd17044d8319a45e1f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
qSwap() is a monster that looks for ADL overloads of swap() and also
detects the noexcept of the wrapped swap() function, so it should only
be used when the argument type is unknown. In the vast majority of
cases, the type is known to be efficiently std::swap()able or to have
a member-swap. Call either of these.
For the common case of pointer types, circumvent the expensive trait
checks on std::swap() by providing a hand-rolled qt_ptr_swap()
template, the advantage being that it can be unconditionally noexcept,
removing all type traits instantiations. Don't document it, otherwise
we'd be unable to pick it to 6.2.
Effects on Clang -ftime-trace of a PCH'ed libQt6Gui.so build:
before:
**** Template sets that took longest to instantiate:
[...]
27766 ms: qSwap<$> (9073 times, avg 3 ms)
[...]
2806 ms: std::swap<$> (1229 times, avg 2 ms)
(30572ms)
after:
**** Template sets that took longest to instantiate:
[...]
5047 ms: qSwap<$> (641 times, avg 7 ms)
[...]
3371 ms: std::swap<$> (1376 times, avg 2 ms)
[qt_ptr_swap<$> does not appear in the top 400, so < 905ms]
(< 9323ms)
As a drive-by, remove superfluous inline keywords and template
ornaments.
Task-number: QTBUG-97601
Pick-to: 6.3 6.2
Change-Id: I88f9b4e3cbece268c4a1238b6d50e5712a1bab5a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
At the moment we have two main strategies for dealing with move
assignment in Qt:
1) move-and-swap, used by "containers" (in the broad sense): containers,
but also smart pointers and similar classes that can hold user-defined
types;
2) pure swap, used by containers that hold only memory (e.g. QString,
QByteArray, ...) as well as most implicitly shared datatypes.
Given the fact that a move assignment operator's code is just
boilerplate (whether it's move-and-swap or pure swap), provide two
_strictly internal_ macros to help write them, and apply the macros
across corelib and gui, porting away from the hand-rolled
implementations.
The rule of thumb when porting to the new macros is:
* Try to stick to the existing code behavior, unless broken
* if changing, then follow this checklist:
* if the class does not have a move constructor => pure swap
(but consider ADDING a move constructor, if possible!)
* if the class does have a move constructor, try to follow the
criteria above, namely:
* if the class holds only memory, pure swap;
* if the class may hold anything else but memory (file handles,
etc.), then move and swap.
Noteworthy details:
* some operators planned to be removed in Qt 6 were not ported;
* as drive-by, some move constructors were simplified to be using
qExchange(); others were outright broken and got fixed;
* some contained some more interesting code and were not touched.
Change-Id: Idaab3489247dcbabb6df3fa1e5286b69e1d372e9
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
And remove the old manual registration code for those operators.
Add some special handling for long/ulong, as these types could be
streamed as a QVariant so far, but are not directly streamable
through QDataStream.
[ChangeLog][QtCore][QMetaType] The QMetaType::registerStreamOperators()
and QMetaType::registerDebugStreamOperator() methods have been
removed. The streaming operators for a type are now automatically
registered together with the type registration. This implies that the
operators should be visible wherever the type is visible and being used.
[ChangeLog][Behavior Incompatible Changes] Because the QDataStream and
QDebug serialization operators are automatically registered with
QMetaType, the declarations of those functions must be present at any
point where the type is used with QMetaType and QVariant.
Change-Id: I4a0732651b20319af4a8397ff90b848ca4580d99
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is required, so that QHash and QSet can hold more
than 2^32 items on 64 bit platforms.
The actual hashing functions for strings are still 32bit, this will
be changed in a follow-up commit.
Change-Id: I4372125252486075ff3a0b45ecfa818359fe103b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It is useful to use an array of bit as an integer value.
I add also a prarameter to set endianness when converting
value to UInt32.
[ChangeLog][QtCore][QBitArray] Added toUInt32() to return
the bit array's value as a uint32_t.
Change-Id: I9d8c7a33f11e7ce94cb67aa9a50b11fa42d56168
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The goal here is to move things over to QArrayDataPointer. This prepares
for it.
Change-Id: I32f54a47594274799600c618f7341c200ceaa306
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In preparation of Qt6 move away from pre-C++11 macros.
Change-Id: I44126693c20c18eca5620caab4f7e746218e0ce3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QBitArray] Added fromBits(), which creates a
QBitArray from a dense bit array, and bits(), which returns that.
Change-Id: Ia9c88b83534240a5872dfffd150b1c8b1c36ced5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
From Qt 5.7 -> LGPL v2.1 isn't an option anymore, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new LGPL header instead of LGPL21 one
(in those files which will be under LGPL v3)
Change-Id: I046ec3e47b1876cd7b4b0353a576b352e3a946d9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Make all containers (excepting QVarLengthArray)
- nothrow default-constructible
- nothrow move-constructible
- nothrow move-assignable
- nothrow swappable
[ChangeLog][QtCore] All containers (with the exception of QVarLengthArray,
but including QSharedPointer) are now nothrow_default_constructible,
nothrow_move_constructible, nothrow_move_assignable, and nothrow-swappable.
Change-Id: I12138d262f9f7f600f0e1218137da208c12e7c0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
This shotgun-surgery approach is motivated by trying to get a
clean(er) build for -Wnoexcept on GCC, so it is expected that
for any class touched here, there will be more operations that
can be marked nothrow. But they don't show up in conditional
noexcept clauses, yet, so they are deferred to some later
commit.
Change-Id: I0eb10d75a26c361fb22cf785399e83b434bdf233
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These are easy, since they can be inline. Most types that would
benefit from move constructors can't have inline move constructors
because these types use smart pointers whose destructor is invoked
in the type's move constructor. Implementing move constructors
out-of-line would break binary compatibility between C++98 and C++11
builds of Qt and its users, so that is not attempted here.
Change-Id: I7f14437c2069cce54c498c7858f4e9060ff05e7b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The macro was made empty in ba3dc5f3b5
and is no longer necessary or used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2013-January/009284.html
Change-Id: Id2bb2e2cabde059305d4af5f12593344ba30f001
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
Documentation has been updated to reflect changes in Qt5.
Change-Id: I3d54d1875962bd27c43bb360ae7b3fda0b7702ba
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Functions like QByteArray::at() assert the given index:
Q_ASSERT(i >= 0 && i < size();
These functions typically get inlined. Now if the index is
e.g. size() - 2, then gcc will emit an ugly warning in
client code ("assuming signed overflow does not occur when assuming
that (X - c) > X is always false").
This can be easily prevented by casting both sides of the second
comparison in the assertion to their unsigned type. The explicit
comparison to zero is then no longer necessary, since that condition
is tested implicitly by the other comparison due to unsigned arithmetic.
Change-Id: Ic7244e1fa5da00a47d1fe0ed56fb81c23d444dfe
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
The hashing functions for QDateTime and QHostAddress did not get the
noexcept keyword because they might allocate memory. QDateTime doesn't
do it now, but it could in the future. QHostAddress does allocate
memory today.
Change-Id: Ia5f80942944bfc2b8c405306c467bfd88ef0e48c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All implicitly shared classes are by definition movable,
so this patch adds Q_DECLARE_TYPEINFO(Type, Q_MOVABLE_TYPE)
to Q_DECLARE_SHARED.
Change-Id: Idf8989ae1a7ed6d1ac13fccb7eaef7395a875350
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Algorithmic complexity attacks against hash tables have been known
since 2003 (cf. [1, 2]), and they have been left unpatched for years
until the 2011 attacks [3] against many libraries /
(reference) implementations of programming languages.
This patch adds a qHash overload taking two arguments: the value to
be hashed, and a uint to be used as a seed for the hash function
itself (support the global QHash seed was added in a previous patch).
The seed itself is not used just yet; instead, 0 is passed.
Compatibility with the one-argument qHash(T) implementation is kept
through a catch-all template.
[1] http://www.cs.rice.edu/~scrosby/hash/CrosbyWallach_UsenixSec2003.pdf
[2] http://perldoc.perl.org/perlsec.html#Algorithmic-Complexity-Attacks
[3] http://www.ocert.org/advisories/ocert-2011-003.html
Task-number: QTBUG-23529
Change-Id: I1d0a84899476d134db455418c8043a349a7e5317
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These defines were there to aid in the commercial
licensing scheme we used long ago, and are no longer needed.
Keep a QT_MODULE(x) define so other modules continue compiling.
Change-Id: I8fd76cd5270df8f14aee746b6cf32ebf7c23fec7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
Tatiana Borisova
Marc Mutz
Thiago Macieira
Lucie Gérard
Allan Sandfeld Jensen
Giuseppe D'Angelo
Lars Knoll
Federico Guerinoni
Jani Heikkinen
Marc Mutz
Matti Paaso
Sergio Ahumada
Michele Caini
Christian Kandeler
Iikka Eklund
Oswald Buddenhagen
Jason McDonald
Giuseppe D'Angelo
Gunnar Sletta
Jędrzej Nowacki
Jyri Tahtela
Qt by Nokia