Add a RAII class for registry keys and use it throughout
the code base.
Change-Id: I666b2fbb790f83436443101d6bc1e3c0525e78df
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
From macOS 10.15 and iOS 13 forward it's not possible to create font
descriptors for system fonts such as .AppleSystemUIFont based on the
family name.
This means we have to preserve the font descriptors we get from CoreText
for fallback fonts, so that we can populate them along with the family name.
Task-number: QTBUG-78821
Task-number: QTBUG-77467
Change-Id: Ifce01da65f90afb7dc2bc3005c3c5870b9c116de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When this was refactored in 3bc10fb9bb to use unique pointers, a move was
added before the connection, so it would essentially always try to connect a
nullptr.
Change-Id: Iab7fce88bc73afd78e6b63ffaef7358f3f4ce7e3
Reviewed-by: Rainer Keller <Rainer.Keller@qt.io>
The xcb platform plugin uses this category for detailed input event
logging, so we might as well be consistent in evdevtouch. When hardware
supports pressure sensing, it's likely to need extra debugging.
Task-number: QTBUG-77142
Change-Id: I7682bb5d49e669054523f9cf556715e511bcd572
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
If the user specifies a font family in their application that doesn't
exist in the system, or one that uses the localized family name, we
will end up resolving the family alias for all fonts in the system,
which typically adds 600-800ms of startup time. Let the user know
when this happens.
Change-Id: Id8d6f55028e37f681ec4a686df25d33240b5a30f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This introduces a dependency on ts_get_eventpath(), which is only
available in tslib 1.15 and newer. This raises the required version to
an unneeded level, so just drop the debug message if the API is not
available.
Change-Id: I4a1cd7abec8d139e70555506d9d21edacf0f4d71
Fixes: QTBUG-78867
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Since iOS 13, the cascade list for the default UI font contains
meta-families for several writing systems, such as CJK. Since
these font families were never populated to the database, we ignored
them in Qt, and thus got missing glyphs for the characters in question.
The fix is to make sure these fonts are populated in the database.
It contains a partial backport of 922d195020,
which adds the qt_isFamilyPopulated() accessor to allow us to check
if the family has been populated in the font database. In Qt 5.14,
there is public API for this in QPlatformFontDatabase, so this is
a temporary resolution until then.
Fixes: QTBUG-77467
Change-Id: Ia9ebb8a19ad2367eb764ae1496a52966b465336b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add back code to handle bitmap glyphs returned when we did not request
a bitmap glyph. This is a can happen on some configurations where
bitmaps are not suppressed.
Fixes: QTBUG-78116
Change-Id: Ie0c6cfbf9c50456431b0e3a23e568f3399e5a879
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The DefaultFontFallbacks.plist system file that we used for looking up
style fallbacks does not exists in macOS 10.15, nor did it ever exists
on iOS. Instead of relying on this file, we hard-code a set of default
families, that we then look up the fallbacks for.
The result of QFont::defaultFamily() on macOS is now:
QFont::Helvetica --> "Helvetica"
QFont::Times --> "Times New Roman"
QFont::Courier --> "American Typewriter"
QFont::OldEnglish --> ""
QFont::System --> "Lucida Grande"
QFont::AnyStyle --> "Lucida Grande"
QFont::Cursive --> "Apple Chancery"
QFont::Monospace --> "Menlo"
QFont::Fantasy --> "Zapfino"
And on iOS:
QFont::Helvetica --> "Helvetica"
QFont::Times --> "Times New Roman"
QFont::Courier --> "American Typewriter"
QFont::OldEnglish --> ""
QFont::System --> "Helvetica"
QFont::AnyStyle --> "Helvetica"
QFont::Cursive --> ""
QFont::Monospace --> "Menlo"
QFont::Fantasy --> "Zapfino"
Fixes: QTBUG-78240
Change-Id: Ie9bc13c9c1031d89f024199e4736a046c568a48d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
As a rule, we don't deliver touch events containing only stationary
touchpoints. To fix QTBUG-52510 we added an exception in
1bd0ab7050 : if the velocity changed,
deliver it anyway. Now we need to do the same if the pressure changed.
Also, on the customer's hardware, pressure is indicated via ABS_MT_PRESSURE.
Change-Id: If7f7088df055d686cdd86967b999e38024f8170f
Fixes: QTBUG-77142
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Add support for specifying the blend operation used when alpha-
blending KMS planes. Only available with atomic modesetting.
Set the environment variable QT_QPA_EGLFS_KMS_BLEND_OP to
the enum value of the 'blend_op' property.
Task-number: QTBUG-75659
Change-Id: If0ef5ba314b88adb530113b608d20fc9c027c5ec
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Follow up to 091a386eaf
Defaulting to querying from the egl config is fine, but dropping support
for the "format" key in the output list in the json config file is not
ideal.
Task-number: QTBUG-76748
Change-Id: I25dc99369d118c300cdef25b464426f6be85453b
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
With things like sample count reducing a format (16 -> 8 -> 4 -> ...)
and trying again is perfectly fine. There is no need to show warnings
in this case. Even some of our own examples in qtdeclarative do a
setSamples(16) which is rarely supported. These all show warnings since
8ec98fc2dc. Avoid this.
Change-Id: Ice83d5720b02e92f77cfd63918c98ad222513b6a
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
No point in warning on every application startup that framebuffer size
setting is not available. Just ignore it then.
Change-Id: Id36ff0ab9560b99cc3f2d56a4ee51455cfa43cb7
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Simply return a Glyph pointer and not a QImage to avoid allocating and
deleting lots of d pointers for QImage when drawing text. Saves one
new/delete pair per glyph drawn and speeds up text drawing by 10% for
relatively large glyphs (probably more for smaller ones).
The qtext::paintLayoutToPixmap() benchmark shows a 16% improvement
in performance with this change.
Renamed the method to glyphData().
Change-Id: I7a353de521e4f4321c770fb1ac6043d33f6f332c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Except in the auto-generated files.
Required to add a cast operator from QDBusObjectPath to QVariant, as the
variadic call() uses QVariant(arg) instead of QVariant::fromValue(arg).
[ChangeLog][QtDBus][QDBusObjectPath] Added explicit cast operator to QVariant.
Change-Id: I3f3004f7b9300a6340d27488f5b97981cbab3c24
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit eea99e1e8f.
The call to FcFreeTypeQuery() takes over 300 ms for
NotoSansCJK-Regular.ttc and friends, so in the current state,
this change cannot be used. I am not sure why these file
in particular takes so long, but it might be because it is
large (around 19MB) or because it is a font collection.
The original fix was intended to be a smaller performance
optimization, but it has added over 2 seconds startup time to
simple applications showing Chinese text, so we revert it
for now and it can be resubmitted later when the problems
have been ironed out.
Task-number: QTBUG-77108
Change-Id: Ibb2ef799573d7effd1595d788939fe33d82cc923
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This is basically a backport from weston:
75487c2560
It states that:
- preserving the existing CRTC -> encoder -> connector routing will
make the startup faster
- the existing routing may be set according to some device limitations
Since the QtWayland implementation appears to be based off an old
version of weston (maybe pre-2.0), this patch might look different from
the latest weston implementation. But the idea stays the same.
FWIW, this works around the issue I've seen on Renesas R-Car E3 (aka
Ebisu) board. Without this patch, VGA1+HDMI1 setup would fail because
the device reported possible_crtcs=1 (meaning {crtcs[0]}) for the second
screen "HDMI1", but the crtcs[0] was already taken by the first screen
"VGA1".
No usable crtc/encoder pair for connector "HDMI1"
With this patch, the crtcs[1] is paired with "VGA1" (as it is the
existing routing), so the crtcs[0] can be allocated for "HDMI1".
Change-Id: Ibd304a8b5efbe4a8aa94b2c5697fe2b399386280
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This reverts commit df2b76046d.
The patches causes high cpu load and it looks like vsync is done
by newer NVIDIA drivers out of the box without such a implementation.
Change-Id: I41c9cfcf1bbdf7da9b764394e4442768084e9a35
Fixes: QTBUG-74866
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Conflicts:
configure.pri
Also required s/solid\.color/solidColor/ in a couple of places in:
src/gui/painting/qpaintengine_raster.cpp
Change-Id: I29937f63e9779deb6dac7ae77e2948d06ebc0319
QChar currently is convertible from nearly every integral type. This
is bad code hygiene and should be fixed come Qt 6.
The present patch is the result of compile fixes from marking these
constructors explicit. As is clear from the distribution of fixes,
only low-level string handling code used these implicit conversions,
an indication that they're not in widespread use elsewhere.
Change-Id: Ief5336f21e6d181e03ab92893b3d13a14adc7cb0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If the filename matches, no other matching is necessary. Fontconfig
doesn't have a fast path for that, so implement one here.
Fontconfig is unlikely to add that fast path, see here:
https://gitlab.freedesktop.org/fontconfig/fontconfig/issues/103
With -O1 builds of Qt and KDE stack, 358 fonts installed according
to KDE systemsetting, on a Ryzen 1800X, startup time of kwrite
decreases as following according to perf stat:
msec task-clock: ~480 ms to ~455 ms
cycles: ~1.73e9 to ~1.65e9
Change-Id: I630a80e4bed2647d5bbd95247005aab7d0cb0363
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Implicit capture of 'this' in [=] is deprecated in C++20.
Fix by using explicit captures.
Change-Id: I1633446f4670202b0d1aca938d8c27dbc0c1411e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In all of these cases, the effect of the change is local to one file.
Change-Id: I3bda3aadee3b42e7797183c2330183390b92d1f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Color fonts may also contain regular alphabet characters that
should be rendered with the current pen. In Qt, however, these
characters were drawn into the cache with a default pen color
of black.
Since all characters in a font is currently backed by the same cache,
and it would require a lot of plumbing to get around this, a step
in the right direction is to include the current pen color in the
cache as long as it is an RGB cache. This means that drawing
text with the color font with different pen colors will create
different caches.
There is no API to select font color on Freetype currently, but
this problem has also not been observed there, as the fonts
in question, with both regular and color glyphs, are not being
detected as color fonts (so the text color will be correct).
So Freetype will be left out for now.
[ChangeLog][QtGui][Text] Fixed bug where regular text rendered
with a color font would always display in black.
Task-number: QTBUG-55096
Task-number: QTBUG-74761
Change-Id: Icc7dbf73241db1e7cc6a0de18c2de927aeecf713
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Define the static QAtomic at file scope to avoid GCC's pessimisation with
function-static QAtomic (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79561),
and make sure the initial value is 0, so it ends up in BSS, not TEXT.
In QRhi..., don't create a static instance of the wrapper class, use a file-
static atomic, too. This turns the class into a glorified namespace.
Change-Id: I707f628e2b434330028077223071716d5704ba32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Converts from OpenGL formats to Vulkan formats.
There are commented out lines for the formats in QOpenGLTexture::TextureFormat
for which it was hard to find an unambiguous mapping to vkFormat.
Task-number: QTBUG-75108
Change-Id: I06a7fd8df7d98cef314410ffd79ca9cff6599357
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
(cherry picked from commit b21b07877a)
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
On Linux this role is needed to make desktop notifications work.
There is no equivalent for Windows, iOS or macOS. On these platforms the
role will have no effect.
Fixes: QTBUG-76333
Change-Id: I4ef3b3321f7a0e2c09c1ce432a668428d14c52b7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
If the font request has the families list set then it should use the
first entry in that if the face name is empty as this will be more
accurate than just the whole family setting which may contain a
comma separated list of family names.
Fixes: QTBUG-75333
Change-Id: Iccc9cde741544af5263cb318da56178adf34299b
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Friedemann Kleint
Tor Arne Vestbø
Johan Klokkhammer Helsing
Shawn Rutledge
Albert Astals Cid
Rolf Eike Beer
Liang Qi
Eskil Abrahamsen Blomfeldt
Allan Sandfeld Jensen
Joerg Bornemann
Qt Forward Merge Bot
Paul Olav Tvete
Laszlo Agocs
Lars Knoll
Marc Mutz
Yuya Nishihara
Dominik Holland
Andreas Hartmetz
Frederik Gladhorn
Giuseppe D'Angelo
Andy Shaw