By adding std::move where it makes sense.
This is not only good for move-only types, but for any type which
can be moved as it saves copies of the return value in any case.
[ChangeLog][moc] Move-only types are now supported as return types
of signals and slots.
Change-Id: Idc9453af993e7574a6bddd4a87210eddd3da48a9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Commit fb376e0fcc removed an array that
facilitated returning the names of built-in types, to avoid the jump tables
from the switch statement. This commit brings it back but makes the array a
compile-time constant string offset table.
The array is created by way of a set of C++11 constexpr functions, so we
require that compiler feature. I've tested that MSVC 2015 does support
it as well as the ICC 17 when masquerading as MSVC 2015, so I've enabled
for that too. The only compiler left out is MSVC 2013.
If we didn't need to support MSVC 2015, this could have been written
more simply with C++14 relaxed constexpr.
This also adds unit tests to confirm that QMetaType::typeName() does
return null when we said it would. We're testing QMetaType::User-1
(which we'll likely never use) and QMetaType::LastWidgetsType-1 to
select something inside the range of the built-in types.
Task-number: QTBUG-58851
Change-Id: I4139d5f93dcb4b429ae9fffd14a33982891e2ac1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
For the windows file system engine, we add an extra macro to use
library loading if configured to do so, but avoid it on WinRT, as
none of the symbols would be found.
We also QT_REQUIRE_CONFIG(library) in the library headers and
exclude the sources from the build if library loading is disabled.
This, in turn, makes it necessary to clean up some header inclusions.
Change-Id: I2b152cb5b47a2658996b6f4702b038536a5704ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
A Q_GADGET class can be used both as a value class and a pointer, but
right now QMetaType::IsGadget is only set for value types. This change
introduces PointerToGadget metatype flag which is set for pointers.
This allow for better handling of gadgets in code as well as
disambiguating between value types and pointers to value types.
Change-Id: Id3bd9e18a8eec7ca1cc6b1c25ed03cdc8c0a75a1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We fully specialize QTypeInfo for most C++ built-in types,
but enums and extended integral types (like GCC's int128_t)
were not covered.
Now that we depend on <type_traits>, we can stop pessimizing
enums and extended integral types in QVector and QVLA by
defaulting QTypeInfo::isComplex to true for such types.
Fix a test that checked that enums were complex types. This should
have been a XFAIL test. Enums are not complex types.
Change-Id: Ibb0fb38cc83e980a428b5573d1db5666593418ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This should reduce the failure rate. We're still doing qSleep of the
same amount of time, but we now only fail if the slip is over 100 ms.
Task-number: QTBUG-58713
Change-Id: I536c32a88bff44dab37afffd14a1afdf0b2e522a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58713
Change-Id: Ie6e6a69b8ea625e3a3102c88d52f1f0fbec242aa
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
At 200 ms, the error on first firing could be 10 ms.
Task-number: QTBUG-58519
Change-Id: Ifaee7464122d402991b6fffd14a02a4ce782f11f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
There was a test that tested this, but was wrong.
[ChangeLog][QtCore][QVariant] Fixed a bug that caused wrong results for
comparisons of QVariants containing either NaN or infinite numbers.
Task-number: QTBUG-56073
Change-Id: I33dc971f005a4848bb8ffffd1475d29d00dd1b7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Under certain circumstances, VS2015 reported ambiguous options in using
the operator>(Enum,int) operator. This change adds a static_cast<qint64>
to remove any ambiguity. In the process of testing this change, a gap
in the existing logic was identified: the handling (just in the test
code) of large negative enum values. Consequently, and additional
test case was added, and additional if-conditions were added to account
for that case.
Change-Id: Ife2c471ba4caa4b9a0107722042114e58145c4d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implements isNull for QVariants of a nullptr so they always return
true to isNull(), instead of depending on how they were constructed.
Task-number: QTBUG-58296
Change-Id: Ibddec795cdadedef7e17d22c265c29e752d8f99f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
C++17 adopts P0021R1[1], which makes noexcept be part of the function
pointer's type and thus be overloadable. It contains some provisions for
allowing a noexcept function pointer to cast implicitly to a non-
noexcept function pointer, but that fails in the presence of templates
and additional overloads that could match the type in question.
Fortunately, the paper proposed a test macro, so we can change our
sources now and be compatible with both C++14 and C++17 rules.
This first failed with Clang 4.0 trunk. This source incompatibility is
not our fault, it's the language's doing.
[1] http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/p0012r1.html
Task-number: QTBUG-58054
Change-Id: I2bc52f3c7a574209b213fffd14988cf0b875be63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QtCore] QCoreApplication::applicationVersion now defaults to
an appropriate platform-specific value. On Windows, it defaults to the
PRODUCTVERSION parameter of the VERSIONINFO resource for classic desktop
apps, and the version attribute of the application package manifest for
Univeral Windows Platform apps. On Apple Platforms (macOS, iOS, tvOS,
watchOS), it defaults to the CFBundleVersion property of the information
property list (Info.plist) file. On Android, it defaults to the
android:versionName attribute of the AndroidManifest.xml manifest
element. On other platforms, the default remains an empty string.
Task-number: QTBUG-57715
Change-Id: I26f83dd00737e06f4321cf962aa5fab8398104ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have to enable qt_safe_ftok with either sharedmemory or
systemsemaphore. In order to make the resulting QT_CONFIG work with the
bootstrap library we switch the features off for bootstrapping. Some
tests and examples have to be excluded when sharedmemory is not
available.
Change-Id: I3fc3926d160202b378be2293fba40201a4bf50c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The prior test deemed there to be narrowing if source and destination
integral-or-enum types didn't have the same signedness; but all values
of an unsigned source type can be represented in a larger signed
destination type, so there is no narrowing in this case.
Updated QObject test-case to match.
Change-Id: I517a5997adcad70e185d7469a8d26788e463cb75
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Since the macro is now just a wrapper for std::is_enum,
its use is also deprecated.
[ChangeLog][QtCore][Global] Q_IS_ENUM is deprecated.
Use std::is_enum<>::value instead.
Change-Id: I09b9f4559c02c81f338cace927873318f2acafde
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Apparently, the CI can run something over 1000x slower than on my
machine. We're getting over 100 ms delays in operations that shouldn't
have taken more than half a millisecond. The last report was of 136%
over budget, so I multiplied the resolution by 4.
Change-Id: I9093948278414644a416fffd1474406967b2a6ee
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
By templating on the <chrono> types and unconditionally using
duration_cast to coerce the duration into a milliseconds, we
violate a principal design rule of <chrono>, namely that non-
narrowing conversions are implicit, but narrowing conversions
need duration_cast. By accepting any duration, we allow non-
sensical code such as
QTimer::singleShot(10us, ...)
to compile, which is misleading, since it's actually a zero-
timeout timer.
Overloading a non-template with a template also has adverse
effects: it breaks qOverload().
Fix by replacing the function templates with functions that
just take std::chrono::milliseconds. This way, benign code
such as
QTimer::singleShot(10s, ...)
QTimer::singleShot(10min, ...)
QTimer::singleShot(1h, ...)
work as expected, but attempts to use sub-millisecond
resolution fails to compile / needs an explicit user-
provided duration_cast.
To allow future extension to more precise timers, forcibly
inline the functions, so they don't partake in the ABI of the
class and we can later support sub-millisecond resolution by
simply taking micro- or nano- instead of milliseconds.
Change-Id: I12c9a98bdabefcd8ec18a9eb09f87ad908d889de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By using _MIN for signed values, and _MAX for unsigned values, we may
detect conversion issues when serializing QVariants using QSettings.
Change-Id: I3ce58ba4b93f791f75c7ae44d1fd5030f07b2f25
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fix is trivial, but the patch adds a new QSettings tests that iterates most
of the QMetaTypes and verifies that storing and retrieving them again gives the
same value. This is a more complete test than the testVariantTypes tests, which
is limited to a subset of the QVariant types. The new tests borrows logic from
the QMetaType test machinery.
QSettings has been Q_ENUM'ified in the process, for improved debug output.
Note that on backends such as the INI backend, the metatype of the QVariant read
from the settings will be a string, so it won't match the input QVariant type,
but the result of converting that to the original value type should still work.
Task-number: QTBUG-56124
Change-Id: Ib03a26abf77c9fb449b94160d28bc4baeb095f25
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
A check "just in case" -- we don't want leaks nor crashes
due to double deletions, and so on.
Change-Id: I24f1a486f0d438595bbe352ab780b07c5d53acbd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It makes very little sense that one needs to have a debug build
of Qt to debug QObject issues in application code. At this date
we don't even offer debug builds for Linux systems, and anyhow
one might want to debug an application running against a
release build of Qt.
[ChangeLog][QtCore][QObject] QObject::dumpObjectInfo and
QObject::dumpObjectTree are now fully functional even in a non-debug
build of Qt.
Change-Id: Ifddd3023ffc82f3dc3928a7a94d4970e2fb1b44a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These tests use helpers, which are not supported on UIKit platforms.
Change-Id: I51447754dba2cd2547be05c3767e4ff3b6b5a671
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's like QElapsedTimer, but marks a time in the future instead.
[ChangeLog][QtCore] Added QDeadlineTimer, a counterpart to
QElapsedTimer, used to mark a time point in the future (a deadline) and
determine whether such a deadline has passed.
Change-Id: Ifea6e497f11a461db432ffff144921f7fbc1d1d3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
As it were, QStringLists were not handled explicitly when comparing
QVariants. If both QStringLists contained only a single entry, they
were treated as QStrings - if both QStringLists were empty, there were
equal (correctly so) - but if one of the QStringLists had more than
one entry, the compare function fell through to returning always 1.
As discussed here: https://stackoverflow.com/a/38492467/3444217
Added rich comparison tests for all non-numerical, non-recursive
QVariants that support them (except QModelIndex and
QPersistentModelIndex)
Task-number: QTBUG-54893
Change-Id: Icc5480d9ba056ee5efe83da566c5829caa1509d7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
One of the good features of the new connection style is that
implicit conversion is performed for the connection arguments.
However, this is also a bad feature when it comes to the old
C remnants in the C++ language: for instance, doubles implicitly
convert to ints, possibly losing precision (and GCC/Clang do not
even warn about those under -Wall, only MSVC does) or even
triggering undefined behavior.
For this reason, when using braced initialization, C++11
disables narrowing conversions or floating/integral conversions.
Use this feature when checking the arguments of a PMF-style
signal/slot connection. Technically this makes the program
ill-formed, however GCC still accepts it (but at least
warns under -Wall).
Hence, add a way to disable these implicit conversions.
This is a opt-in and guarded by a macro, as it's a source
incompatible change.
[ChangeLog][QtCore][QObject] The
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT macro has been added.
When using the new connection syntax (PMF-based) this macro
makes it illegal to narrow the arguments carried by the signal,
and/or to perform floating point to integral implicit
conversions on them. When the macro is defined,
depending on your compiler a QObject::connect() statement
triggering such conversions will now fail to compile.
Change-Id: Ie17eb3e66ce0cd780138e60d8bb7da815a4ada83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In all other forms of disconnecting this is done. We also know the
signal index, so there is no reason not to do this.
Change-Id: Ic8b042cd8f45dbff74b42ee30c384a84bef78b20
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QtCore][QTimer] Added support for std::chrono duration
objects for QTimer methods, like QTimer::singleShot and
QTimer::setInterval.
Change-Id: I87e17314d8b24ae983b1fffd14536e24d5b12424
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It's really a kernel functionality, as it implements really low-level
functionality and it's used by the event dispatcher. It was in tools/
only because QTime is.
QDeadlineTimer is also coming to kernel/.
Change-Id: Ifea6e497f11a461db432ffff14491c6d9b839eb0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
...if a PMF connection had already happened. Since UniqueConnection
isn't implemented for non-PMFs (functors and lambdas aren't comparable,
even if static member functions or non-member functions are), we pass a
null pointer for comparison argument. The disconnect() code already
protected against a null pointer there, but not the connect code path
with Qt::UniqueConnection
Change-Id: I87e17314d8b24ae983b1fffd145324beced0494d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Dario Freddi <dario.freddi@ispirata.com>
The stream in question is from prior to Qt 5.0 release, before
commit 718a2251be changed QDateTime
serialization format to store Qt::TimeSpec instead of the private
flag. The last byte was 0xff meaning LocalUnknown, but 0xff is
not valid in Qt 5.0.
It was just garbage that Qt up to now just accepted. With the upcoming
short QDateTime optimization, the results are worse.
Change-Id: I25d85d86649448d5b2b3fffd1450f57df17e7794
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
QVariant::canConvert<Enum> was returning true for everything can can be converted
to integer, but not for integer itself. That's because in QVariant::canConvert
we set the targetType to Int of it's an enum, but the Int->Int case was not
on the conversion matrix. So this commits adds it to the conversion matrix
and now QVariant::canConvert<Enum> returns consistently true for int itself.
But even tough canConvert returned true, it did not actualy do any conversion
to the enum type itself. Fix that by handling the case properlt in 'convert'
[ChangeLog][QtCore][QVariant] Fixed QVariant::canConvert and conversion from
integer types to enumeration types.
Task-number: QTBUG-53384
Change-Id: I6ac066f3900e31bfcea7af77836ddfc7730bd60b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The behavior was different in the variadic template code and in the C++98
code. The code without variadic template support was not copying the functor
object (e.g. a lambda) before calling it.
However, in the variadic template section, QtPrivate::FunctorCall::call
took the functor by value instead of by reference resulting in a copy.
QtPrivate::FunctorCall::call is a helper function for
QtPrivate::FunctionPointer::call which is only needed for variadic template
expension.
[ChangeLog][QtCore][QObject] If the compiler supports variadic templates,
no longer copy functor connected to a signal each time the signal is
emitted. Restoring the C++98 behavior.
Task-number: QTBUG-52542
Change-Id: I3ca20ef6910893b8a288e70af7de4c7b69502173
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The flags here are passed to a private QVariant constructor, and they
really represent a boolean - IsPointer or not.
Because the flag for the key_type was incorrectly populated with the
flag for the value_type, memory would be corrupted when using a mapping
type whose value_type is a pointer, but whose key type was not, such as
QMap<QString, int*>
This typo has been there since the concept was introduced in commit
v5.2.0-alpha1~807 (Add container access functionality for associative
containers in QVariant., 2013-04-05).
Task-number: QTBUG-52246
Change-Id: I9ecb13c603015eed2dc2ca43947fa0ecd6be8b5a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
People use this, so make sure there's a test for it.
I don't expect this test to fail, but static and
dynamic checkers should be presented with this
use-case, so they have a chance of warning, because
certain implementation strategies of QPointer may
make this code undefined.
Change-Id: I334bd73204ba4e186c4098fc6b7188917407e020
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is analogous to QObject::inherits() but only requires the
metaobjects rather than pointers to a QObject instances. This is needed
for type checking on the backend of Qt 3D where we do not have access
to QObject pointers.
Change-Id: I14d26c4cbb5cc3fbecb57725f2c14ee0ffda4a11
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
As found by GCC 6:
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:1476:9: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
tn += ">";
^~
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:1474:5: note: ...this ‘if’ clause, but it is not
if (tn.endsWith('>'))
^~
Fix += argument from char[2] to char as a drive-by.
Change-Id: I814dc58830934cac7fcf81eb7fd7564b2abeb631
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
Some entries were not updated and tests failed to succeed on platforms
which need to deploy content/testdata.
Change-Id: Ieb2b44c375b04cbaaecc1fb2303cc2478b86a100
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
testdata needs to be deployed to temp and current directory
needs to be set to that directory for the test to succeed.
Change-Id: I2dd023af9073d90afbb4ad60fcfb50bb1af4e159
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
WinRT does not allow do connect to the localhost due to security
constraints and sandboxing. Hence we need to disable those
currently.
Change-Id: Idb8c71397a41e5fa5bad9d618dba1bb389e71b9c
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This patch makes sure that all events posted using Qt on top of the
GLib event loop have the loopLevel counter incremented.
This is done since Qt depends on the fact that all deleteLater() calls
are issued within the scope of some signal handler (in other words,
triggered by the chain sendEvent() -> notifyInternal2()).
There is a side effect though: in the conditions affected by this
patch, that is deleteLater()s issued within a glib event handler for
example, manually calling processEvents() or sendPostedEvents() with
or without the QEvent::DeferredDelete flag has the same effect, and
deferred deleted events are always processed.
While this is not a currently working feature which the patch breaks,
this side effect seems to be difficult to avoid without separating
sendPostedEvents() and processEvents() into a public and a private
method, in order to detect when they are manually called.
Such change could perhaps be done for Qt6.
An autotest for QTBUG-36434 is also included.
Autotesting for QTBUG-32859 seems to be more challenging in this
respect, due to its dependency on GLib.
Task-number: QTBUG-18434
Task-number: QTBUG-32859
Task-number: QTBUG-36434
Change-Id: Ib89175aa27c9e38bca68ae254d182b2cd21cf7e9
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Not just fuzzily equal. The fuzzy comparison fails for infinities, since
the expression p1 - p2 where p1 = p2 = infinity is NaN. And NaN
comparisons are always false.
As a nice side-effect, we don't do the more expensive computation of a
multiplication if the two numbers really are equal.
Task-number: QTBUG-50036
Change-Id: I11f559ef75544c50b3f8ffff1420cec7c7273295
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If CountedStruct is passed a GetSenderObject object,
it will attempt to call a member on it from within
its own destructor.
That works usually quite well, but in this test case,
which tests for function object leaks when a connection
is torn down because the sender object is destroyed,
the destruction of the CountedStruct happens when all
connections are severed in ~QObject. At that point,
what used to be a GetSenderObject instance no longer
is one and the call into one of its member functions
invokes undefined behavior.
Fix by making QObject::sender() public by a using
declaration instead of a wrapper function.
Found by UBSan:
tests/auto/corelib/kernel/qobject/tst_qobject.cpp:6007:104: runtime error: member call on address 0x7ffc6e7538b0 which does not point to an object of type 'GetSenderObject'
0x7ffc6e7538b0: note: object is of type 'QObject'
Change-Id: Ia973140037b3c1b5a670a8a3949d09b956f40349
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If QObjectPrivate::declarativeData is set, it is
in various places in Qt expected to point to a
QAbstractDeclarativeDataImpl, from which ownedByQml1
is unconditionally read.
In noDeclarativeParentChangedOnDestruction(), the
declarativeData pointer is, however, set to a local
QAbstractDeclarativeData instance, which, being an
empty class, has size 1 and alignment 1.
Depending on the compiler's idea of bit field order,
this code either read uninitialized data from the
dummy object, or else some random stack memory outside
any (valid) object.
What caught UBSan's attention, though, was the
difference in alignment between the two classes:
src/corelib/kernel/qobject.cpp:917:9: runtime error: member access within misaligned address 0x7fffc9cf706f for type 'struct QAbstractDeclarativeDataImpl', which requires 4 byte alignment
Fix by providing a properly initialized object of the
correct type.
Change-Id: Iae83a949ee5a7bc98df13e35ea614c063085fa13
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Don't pass around meta-type IDs in QMetaType::Type
variables. It leads to reading values from an enum
variable that are invalid.
Fix by passing the IDs around as int.
Found by UBSan:
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:408:5: runtime error: load of value 4028, which is not a valid value for type 'Type'
Change-Id: Idd106ee3d7960fe3d8fefc0fc5830fc22d38a513
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Also use this for converting doubles with QVariant. We generally want
exact results there, rather than adding rounding errors whenever we
convert.
[ChangeLog][QtCore][QLocale] Added special value for double conversion
precision to get shortest accurate representation.
Change-Id: I905b8a103f39adf31d24b6ce2c8a283cf271b597
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ieffb429efdc14aa5932b3fcdef5a18e13a62d35f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Prefer QCOMPARE over QVERIFY for equality and use QLatin1String().
Change-Id: If226a0fc7b25be3e6774c7e36ca1e6f99234e5dd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
If QTimer::singleShot() is used with a functor callback and a context
object with different thread affinity than the caller, a crash can
occur. If the context object's thread is scheduled before
connecting to QCoreApplication::aboutToQuit(), the timer has a change
to fire and QSingleShotTimer::timerEvent() will delete the
QSingleShotTimer object making the this pointer used in the
connection invalid. This can occur relatively often if an interval
of 0 is used.
Making the moveToThread() call the last thing in the constructor
ensures that the constructor gets to run to completion before the
timer has a chance to fire.
Task-number: QTBUG-48700
Change-Id: Iab73d02933635821b8d1ca1ff3d53e92eca85834
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QtCore][QMetaProperty] write() now resets the property if an
empty QVariant is given, or set a default constructed object if the
property is not resettable
Change-Id: I9f9b57114e740f03ec4db6f223c1e8280a3d5209
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Liang Qi
Olivier Goffart
Thiago Macieira
Ulf Hermann
Daniel Vrátil
Marc Mutz
Friedemann Kleint
Glen Mabey
Allan Sandfeld Jensen
Jake Petroules
Edward Welbourne
Kai Koehne
Tor Arne Vestbø
Giuseppe D'Angelo
Lars Knoll
Jędrzej Nowacki
Clemens Sielaff
Mike Krus
Liang Qi
Stephen Kelly
Friedemann Kleint
Eirik Aavitsland
Sean Harmer
Maurice Kalinowski
Paolo Angelelli
Louai Al-Khanji
Jani Heikkinen
Simon Hausmann
Ulf Hermann
Juha Turunen