We missed the terminating ";" in the QSKIP lines.
Amends ea4d6b987a
Pick-to: 6.3 6.4
Change-Id: Ibda43b8a84230c243dbcc74e157f4c3f8ef3891d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Thread termination might prevent stack unwinding, which then
generates ASAN errors such as
ERROR: AddressSanitizer: stack-buffer-underflow on address
0x7f3c1d7858b0 at pc 0x7f3c243d8918 bp 0x7f3c1d7857f0 sp 0x7f3c1d7857e8
Skip such tests so that we can enable blocking CI runs under ASAN.
Fixes: QTBUG-104421
Pick-to: 6.4 6.3
Change-Id: I169235a12190e3f72525cddfe1a44a4bee19eca1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This adds support for additional codecs to QStringConverter when ICU is
available.
We store the converter in the state (d[0]), and its canonical name in
d[1]. We need the name there, as in the clear function we close the
UConverter, and set the pointer to null. Consequently, the actual
conversion functions might need to re-open the converter again. The
advantage of this approach is that clear is used in the destructor of
State, and with this approach we properly clean up the state.
There is however a disadvantage: The clear function was so far also used
for resetting the state when QStringConverter::resetState . Discarding
the whole Uconverter for that is however rather costly. For that reason
we modify resetState to call a new function, State::reset. For existing
converters, it behaves the same as clear; for the ICU based converter,
we call the more efficient ucnv_reset. Code compiled against Qt 6.4 can
benefit from this more efficient version; code compiled against older Qt
versions will continue to work, as the conversion functions can just
recretate the converter from the name.
We can distinguish between ICU and non-ICU converters by checking if the
UsesIcu flag is set.
QStringConverter::name is changed to return the name stored in d[1]. The
interface of the ICU converter has a dummy name, so code using the old
name function from QT < 6.4 still returns something, namely a message
asking the user to recompile.
The function is moved out of line, as we need to check for the private
ICU feature, and want to avoid having that check in the public header.
As the QStringConverter ctor taking a name now can allocate memory, it
can no longer be noexcept. Removing the noexceptness is safe, as it was
only added after Qt 6.3.
Note that we cannot extend the API consuming or returning Encoding, as
we use Encoding values to index into an array of converter interfaces in
inline API.
Further API to support getting an ICU converter for HTML will be added
in a future commit.
Currently, the code depending on ICU is enabled at compile time if ICU
is found. However, in the future it could be moved into a plugin to
avoid a hard dependency on ICU in Core.
[ChangeLog][Corelib][Text] QStringConverter and API using it now
supports more text codecs if Qt is compiled with ICU support.
Fixes: QTBUG-103375
Change-Id: I7afb92fc68ef994179ebc7a3aa73beebb1386204
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The only way to use them was to put them in a union and then write all
the members of the union to set the various bit ranges. As only one
member of a union can be active at any time, the compiler is free to
optimize those writes away, though. This has started happening in the
wild now.
As we have a replacement, we can remove the old and broken code now.
Task-number: QTBUG-99545
Change-Id: I90718ec06662258d1c15220f54da9eed2186c5a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Found by codespell
Pick-to: 6.4
Change-Id: Ie3e301a23830c773a2e9aff487c702a223d246eb
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit b9cce12e76, which
broke
function_ref<void(int)> f = [](int i) { return i; };
ie. swallowing of return types.
We could maybe implement the same without invoke_r, with the same
manual if-constexpr that invoke_r has, but it would be a pointless
duplication across the two thunks we have, so just use invoke_r.
Add tests.
Pick-to: 6.4
Task-number: QTBUG-103739
Change-Id: I6034f05d813c06a25e8058ded5b6b62f3ca858b4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We implicitly checked it, because, in C++20 builds, the non-equality
relational operators are synthesized from it by the compiler, and we
test those, but we didn't check that <=> returns strong_ordering.
We now do.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104108
Change-Id: Ieb19a2d4cb2d600d884f4e2e89e98c6187e23872
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
On finishing/terminating a thread, when processing posted events,
we need to consider QThread's own data instead of caller thread's data.
Otherwise we can get into unexpected situations such as double
destruction of an object, premature destruction, etc.
Fixes: QTBUG-103922
Pick-to: 6.4 6.3 6.3.1 6.2 5.15
Change-Id: Idf77221ebbaa0b150ee2d0c296b51829ae8dc30e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Skipping moveToTrash() test is needed because WebOS
does not implement a trash bin directory.
Fixes: QTBUG-104053
Pick-to: 6.4
Change-Id: Id1d1595eb401d8ef3a403c915d95be1cd75368d2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][QTestLib] QCOMPARE now evaluates toString() on its
arguments lazily, speeding up the general case where the comparison
doesn't fail. This is true for the QCOMPARE functionality provided
by Qt. If you specialized qCompare() for your own types, then you
need to change its implementation in line with Qt's own qCompare()
specializations in order to enable this feature.
[ChangeLog][QTestLib] QCOMPARE calls with nullptr argument(s) will
now print the actual and expected values upon failure.
Previously it was not like that because of the compareHelper()
overload in qtestresult.cpp that treated the presence of
nullptr-arguments as a reason to ignore formatFailMessage() call.
New implementation does not have this check, and correctly
executes formatFailMessage() for all arguments.
Note that the qCompare() overloads that call QTestResult::compare()
internally were not affected by this patch, because they already
defer toString() invocation until the comparison fails.
Some numbers, collected against shared release developer build.
I checked how this change affects the test execution. The idea was
to pick some tests for types that do not have a specific
QTestResult::compare overload, so I picked a couple of QByteArray
tests.
The comparison is done by running a test 10 times and taking the
average execution duration, as reported in the log.
tst_qbytearrayapisymmetry:
Before: 15.6 ms
After: 14.2 ms
tst_qbytearray:
Before: 41 ms
After: 36 ms
The benefit is around 9% and 12% respectively.
Fixes: QTBUG-98874
Change-Id: I7d59ddc760168b15974e7720930f629fb34efa13
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This allows to defer the toString() invocation until it is really
needed, and so allows to speed-up the test execution.
I was testing a release shared developer build, running
tst_QStringApiSymmetry 10 times before the change, and 10 times after
the change, and then taking the average execution duration, as
reported in the log.
Before the change (using QCOMPARE): 51ms
After the change (using QCOMPARE_EQ): 45ms
As we see from the results, the benefit is around 10%.
Task-number: QTBUG-98873
Task-number: QTBUG-98874
Change-Id: Ifcfbcca1f2c1eaf82c7f1a9098fa1512a269cbf8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The compare() implementation made its actual and expected seem to have
different types (using a typedef name for one, when the other was of
the type that expands to) and the formatter it used was needlessly
clunky. Use modern string literals and package a repeated
null-or-quoted representation as a lambda, inline the resulting
simplified prettyElement() into prettyPair(), which can now just take
a pair rather than an iterator. Short-cut the empty list so that the
comma-joined accumulation could initialize with the first entry and
loop over the rest, always joining with a comma.
Undo commit f776595cc10aaafc7162f382a8fa11afffb0e708's mistaken update
to the copyright header and update correctly.
Change-Id: I99258dafa01e79f9ec384d9b375a59376eb7fb53
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This requires a different computation of the mask since we can't shift
out of the storage type.
Change-Id: Ife85ca3e0c5ca47f06988a397cc2f8a7e28ad0fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is an implementation of function_ref, which has been proposed for
inclusion into C++23, but has not been accepted, yet, which is why we
place it in namespace qxp (for eXPerimental) instead of q23.
The implementation is based on wg21.link/P0792r9, which, at the time
of writing, is the latest revision of the paper. It will be used in
both QTestLib and qmldom.
Fixes: QTBUG-103739
Change-Id: I52723eca28f7ac02ce7ce51928361d81ae5c92b1
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QScopedValueRollback has a few users that apply it on QAtomicInt,
which happens to work as QAtomicInt is copy-constructible and its
ctors are implicit.
But that's of course nonsense. We don't need to store the oldValue in
an atomic, nor do we need to pass the new value into the ctor as an
atomic.
So, add a QAtomicScopedValueRollback which works on std::atomic as
well as the Qt atomics, but distinguishes between the reference (which
is atomic) and the value (which isn't), and use it in one of the
users, tst_QList.
Keep it private until we know whether there's an actual need for this.
The test is a copy of tst_qscopedvaluefallback, so the occasional
oddity (like atomic op*=) should be ignored.
Task-number: QTBUG-103835
Change-Id: I3c05b3e51f465698657a02ca5521ed465386e9a6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
As with method signatures, register class names using template function
specialization in the QtJniTypes namespace, and then declare C++ types
as JNI classes with a class name string. Such classes implicitly get
registered as JNI types as well.
Add a QJniObject construct method (since C++ constructors that are
templates cannot be explicitly instantiated with a type), and a
QJniEnvironment::findClass overload.
Add test coverage, also for the recently added macros for native
methods.
As a drive-by, change the name of the Q_JNI_DECLARE_NATIVE_METHOD
macro to Q_DECLARE_JNI_NATIVE_METHOD for consistency.
Change-Id: Ic19562d78da726f202b3bdf4e9354e8ad24d8bd9
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Attempting to use an invalid QStringConverter would so far have resulted
in a crash, as we would dereference the null iface pointer.
Fix this by inserting adequate checks, and ensure that hasError returns
true if we attempt to en/decode with an invalid converter.
Pick-to: 6.2 6.3
Change-Id: Icf74bb88cd8c95685481cc0bd512da99b62f33e6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There are no commented out test cases remaining, so the normal
test vectors are identical to full test vectors.
Fixes: QTBUG-97537
Pick-to: 6.3
Change-Id: I987f178f192e1c8e2d998d36499fdce84f237e77
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
UAX #14, revision 45 (Unicode 13) has changed rule LB30 to only
trigger if the open parentheses is non-wide:
(AL | HL | NU) × [OP-[\p{ea=F}\p{ea=W}\p{ea=H}]]
This fixes the remaining 24 line break tests.
Task-number: QTBUG-97537
Pick-to: 6.3
Change-Id: I9870588c04bf0f6ae0a98289739bef8490f67f69
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Implement part of LB30b introduced by UAX #14, revision 47
(Unicode 14.0.0):
[\p{Extended_Pictographic}&\p{Cn}] × EM
This fixes one line breaking test.
Task-number: QTBUG-97537
Pick-to: 6.3
Change-Id: I3fd2372a057b7391d8846e9c146f69a54686ea61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Word breaking rule WB3d should not be affected by WB4.
This fixes the remaining word break test.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I99aee831d7c54fafcd2a9d526a3e078b12c5bfad
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Disable break between sequences of WSegSpace characters (rule WB3d,
introduced in UAX #29, version 33, Unicode 11.0.0). Also disable breaks
between WSegSpace and (Extend | Format | ZWJ) due to rule WB4.
Adjust "words4" test to take the above changes into account (space
character belongs to WSegSpace).
Mention the full class name in a comment inside the word break table.
This fixes 34 word break tests.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I7dfe8367e45c86913bb7d7fe2adb053711978487
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This rule was simplified in version UTS #14 version 45 (Unicode 13.0.0)
to read:
× IN
Re-enabled 28 fixed line break tests.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I1c5565a8c1633428c22379917215d4e424ff0055
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Adjust implementation of rule LB8a of UAX #14. The rule was changed
in version 41 (corresponding to Unicode 11.0.0):
ZWJ × (ID | EB | EM) ⇒ ZWJ ×
Fixing this rule fixes 9 line break tests. Those are re-enabled.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I1570719590a46ae28c98ed7d5053e72b12915db7
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Simplifies the test a little.
Pick-to: 6.3
Change-Id: I77c8221eb2824c369feffffd16f0a7fc44215aaf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The utf8.txt file was only 21 bytes and contained exactly two non-ASCII
characters. It wasn't very good.
This commit brings back the UTF-8 test rows that existed before commit
18ec53156e deleted tst_Utf8. There's a lot
of overlap with some of the other rows in this test, though.
Pick-to: 6.2 6.3
Change-Id: I77c8221eb2824c369feffffd16f094619b69faef
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The QLocal8Bit implementation assumes that there's at most one
continuation byte -- that is, that all codecs are either Single or
Double Byte Character Sets (SBCS or DBCS). It appears to be the case for
all Windows default codepages, except for CP_UTF8, which is an opt-in
anyway.
Instead of fixing our codec, let's just use the optimized UTF-8
implementation.
[ChangeLog][Windows] Fixed support for using Qt applications with UTF-8
as the system codepage or by enabling that in the application's
manifest.
Discussed-on: https://lists.qt-project.org/pipermail/interest/2022-May/038241.html
Pick-to: 6.2 6.3
Change-Id: I77c8221eb2824c369feffffd16f0912550a98049
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends 2a893db480, which changed the
#ifdef'ery but didn't actually enable the building of the test on
Android.
Task-number: QTBUG-87414
Pick-to: 6.3 6.2
Change-Id: Id944dd3023da40ecbf4b8a324784409a63f94aec
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Add a template function that allows us to get the method signature
string from a free function, which are used as native callbacks methods
from Java.
Provide a macro that defines a signature object, and a JNINativeMethod
object based on it, in an internal namespace so that we don't pollute
the namespace with generated names.
Add another macro to get the generated JNINativeMethod object based on
the free function name.
Lastly, add overloads to QJniEnvironment::registerNativeMethods that
take a std::initializer_list of JNINativeMethods.
We can now declare a free function to be a JNI native method:
static bool callbackFromJava(JNIEnv *e, jobject /*thiz*/, jstring p1)
{
// ...
}
Q_JNI_DECLARE_NATIVE_METHOD(callbackFromJava);
and register it with the JNI environment like this:
QJniEnvironment jni;
jni.registerNativeMethods(clazz, {
Q_JNI_NATIVE_METHOD(callbackFromJava)
});
removing a significant amount of boiler plate code.
Change-Id: Ie4007b24125879fed3dae1f4d232b4aa95999b44
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
QMetaType can register a converter from a smart pointer class to
QObject *. The code tries to do so even if the smart pointer is
actually holding a pointer to a _const_ QObject
(e.g. shared_ptr<const QObject>), causing a compile error:
../src/qt5/qtbase/build/include/QtCore/../../../src/corelib/kernel/qmetatype.h:1208:32: error: invalid conversion from ‘const QObject*’ to ‘QObject*’ [-fpermissive]
1208 | return p.operator->();
| ~~~~~~~~~~~~^~
| |
| const QObject*
Disable the conversion if indeed the source is const qualified.
Change-Id: I9e9bc5992f74131e5cfd6ece9b83d4f26d370e92
Fixes: QTBUG-103741
Pick-to: 6.2 6.3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The unsigned return value was very un-Qt-ish, and, indeed,
tst_QCoreApplication just stored the result in ints.
Port to qsizetype, being the type of the expression that the function
calculates.
Task-number: QTBUG-103532
Change-Id: I95a81a686439b0686faad7a430adeaab66dc9e8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The only in-tree user outside QtCore is tst_QCoreApplication, guard
the (single) test function there with QT_BUILD_INTERNAL.
Change-Id: Ibc87ba76f2135cd8283acd75318f80a95e4b5c45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... in favor of including qabstracteventdispatcher_p.h, where needed.
Keeps the code DRY.
Change-Id: I5bee2e653cb29ffac2601ff03c952a4b3adbdb9c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the Q_OS_WIN32 guard for the include of QWinEventNotifier.
Change-Id: I7824b2ee236a370c83fd85a2f594a39cf36b36e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This allows us to specialize JNI type signature templates for e.g. the
context object, which in Java signatures is "android/content/Context".
Introduce a Q_DECLARE_JNI_TYPE macro that takes care of the plumbing.
The types declared this way live in the QtJniTypes namespace, and
transparently convert from and to jobject. Since jobject is a typedef
to _jobject* we cannot create a subclass. Use a "Object" superclass
that we can provide a QJniObject constructor for so that we don't
require the QJniObject declaration to be able to use the macro.
The APIs in the QNativeInterface namespace doesn't provide source or
binary compatibility guarantees, so we can change the return types.
Change-Id: I4cf9fa734ec9a5550b6fddeb14ef0ffd72663f29
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Since we know at compile time whether the return type is an object type,
we can use 'if constexpr' and auto return type in the call(Static)Method
and get(Static)Field functions to call the object-type methods.
This makes the object-methods conceptually obsolete, but don't declare
them as deprecated as long as they are still used in submodules to avoid
warning floods and build failures in -Werror configurations.
Change-Id: Ic3019ed990a9252eefcb02cdb355f8a6ed6bc2ff
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This allows the compiler to deduce the template arguments based on the
provided method parameters, which we can then pass to the methodSignature
and fieldSignature helpers to generate the signature string completely at
compile time.
Since we can't partially specialize template member functions, replace
the specializations for void methods with compile-time-if branches in
the general templates.
This variadic template now prevents implicit conversion from the
LiteralStorage types to const char* signatures, so catch the case where
such a type ends up in the parameter list.
Due to overload resolution rules for constructors, we need to explicitly
disable the constructor if any of the arguments is a string literal type,
as we have to keep the old C-style variadic function working for such
calls.
Add variations that use the variadic templates to the unit tests.
Change-Id: I8734664b38bae932369462330a9a03302254c33c
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
During type normalization, we remove the struct, class and enum
keywords (see the skipStructClassOrEnum function). However, we only want
to do that for actual keywords, not for a name that happens to start
with e.g. "enum", as in "enumerationNameSpacce".
Adjust the MSVC check to still require no identifier character after the
keyword, while still allowing for some remaining characters.
Fixes: QTBUG-97813
Pick-to: 6.3 6.2
Change-Id: I82b873d02ff454cce4b75f2814a52a66f2268208
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We don't support it any more. I don't think it has ever properly
compiled Qt 6 (and it's no longer working for me against GCC 12's
libstdc++ headers). If you report a bug against it, Intel support's
first question is if you can try instead the new Clang/LLVM-based oneAPI
C++ compiler.
So we support only that one, which identifies itself as Q_CC_CLANG.
Change-Id: I5ff8e16fcdcb4ffd9ab6fffd16eb57a092c8439e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This also includes the fix for x-objc++src mimetype.
Fixes: QTBUG-70739
Pick-to: 6.3 6.2 5.15
Change-Id: I24f70fa5cea2e5b1a7877569be98d36878fcfe72
Reviewed-by: David Faure <david.faure@kdab.com>
Our previous approach of creating a union from individual special
integer bitfields leads to undefined values because only one member of a
union can be active at any given time. Compilers have finally caught up
with us on that and have started removing "no-op" writes to members.
The primary user of the special integer bitfield unions is
qv4compileddata_p.h in qtdeclarative. We want our on-disk format of
QML compilation units to be platform agnostic and space efficient.
Pick-to: 5.15 6.2 6.3
Task-number: QTBUG-99545
Change-Id: I24847bda2c364eb8ba75f074cde2a9bec25ced06
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fabian Kosmale
Volker Hilsheimer
Ulf Hermann
Thiago Macieira
Dimitrios Apostolou
Kai Köhne
Marc Mutz
Vladimir Belyavsky
Janne Juntunen
Ivan Solovev
Edward Welbourne
Ievgenii Meshcheriakov
Giuseppe D'Angelo
Alexey Edelev
Lucie Gérard
Liang Qi