SQlite allows to return fine-granulated error codes but this behavior is
not enabled by default (due to backwards compatibility concerns).
Enable them for the SQLite driver by default but provide an option to
disable them when needed.
[ChangeLog][QtSql][QSQLITE] The plugin now returns the extended error
codes by default.
Change-Id: I59cec9aea46eb03f1e7ca02903d769c003a1ae30
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The Professional CMake book suggests always using explicit linkage with
target_link_libraries, so let's use that.
Whether to use PUBLIC or PRIVATE depends on the context. But let's
be conservative and advise on using PRIVATE by default.
Task-number: QTBUG-88935
Pick-to: 6.0
Change-Id: I12b80ee85be9f6916f1e4dea6b1c9cb29e03c20f
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The content in the porting guides are closer to a changelog than
a porting guide. At this point, it is easier for maintainers and
contributors to write in a changelog than a guide. This change
should help with readability and is closer to the usage of
"Changes" in documentation.
Part of a rename in other submodules.
Task-number: QTBUG-87156
Change-Id: Ib59de7976fae19e7b39962e80161df6628e4070b
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The non-versioned one's do miss some properties. It's therefore best
to not advocate using them.
Change-Id: I53645e65ed4de4e0100e59905c024cdfe40be0c5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Also, merge constructor overloads, and remove superfluous explicit from
a non-converting constructor.
Change-Id: I60d0e646d1aaeb8ea66b7598076c3e3ba356c12e
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Also add existing such docs to the new document group
Task-number: QTBUG-84051
Change-Id: I76f033f0846e09943f249d2beeb1606869eef382
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Since an EXECUTE BLOCK statement can have a mix of ? and :var syntax
then a special case for this needs to be added so that it does not try
to convert the :var parts into positional placeholders as they need to
kept as-is when preparing such a statement.
Pick-to: 5.15
Fixes: QTBUG-83152
Change-Id: Iff891207ad6dea1681a1b3a335acbbbb668b465d
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Fix our API, so that QStringList and QList<QString> are the
same thing.
This required a bit of refactoring in QList and moving the
indexOf(), lastIndexOf() and contains() method into
QListSpecialMethods. In addition, we need to ensure that
the QStringList(const QString&) constructor is still available
for compatibility with Qt 5.
Once those two are done, all methods in QStringList can be moved
into QListSpecialMethods<QString>.
Change-Id: Ib8afbf5b6d9df4d0d47051252233506f62335fa3
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Be a little bit more specific what needs to be done when compiling the
sql driver without compiling the whole Qt
Change-Id: I3e8010d4cc84a83108340e525e620abf6b6e89c1
Pick-to: 5.15
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
This is added to Interbase in v7 and Firebird in v3 which has been
available for sometime now. This means the minimum supported for
Interbase is now v7.
[ChangeLog][QtSQL][Interbase] The minimum required version for Interbase
is now v7.
Fixes: QTBUG-83401
Change-Id: I9927fd962f25c935be8ed5d2b7c76c00fb88cd8c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Address a ### Qt6 comment from change
283008e123, and start using
QStyledItemDelegate in more places, so those get proper
look and feel.
Change-Id: I39767ba99b7942faada1fba0ac241deb35563b63
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
- Remove obsolete functions and enumeration values
- Remove QObject * parameter from QMetaProperty accessors
- Fix renamed enumerations in QSsl
- Fix list items to be \li
- Fix function signatures and variable names
Change-Id: I37c7e6bf2c8ff92bc7b82620bae0a27796f866ab
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Use QMetaType for constructing a QSqlField, fixing:
ccode/sqldatabase/sqldatabase.cpp:91:41: warning: ‘QSqlField::QSqlField(const QString&, QVariant::Type)’ is deprecated: Use the constructor using a QMetaType instead [-Wdeprecated-declarations]
Change-Id: If420ad3d7f5d9dce05ad892cddf84a1b77a45b3f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We extend configurejson2cmake to read the "commandline"
information from configure.json. This data is then translated to CMake function
calls and written it into commandline.cmake files.
We extend QtProcessConfigureArgs.cmake to pick up those commandline.cmake
files to feed our command line handling code, which is a
re-implementation of the command line handling in qt_configure.prf.
The command line handler sets INPUT_xxx variables, similar to
configure/qmake's config.input.xxx variables. The INPUT_xxx values are
translated
- to -DFEATURE_xxx=ON/OFF arguments if the input represents a feature,
- to corresponding CMake variables if such a variable is known,
- or to -DINPUT_xxx=yyy CMake arguments.
Configure arguments that have an entry in
cmake/configure-cmake-mapping.md are actually implemented. Other
arguments are likely to need more work.
Task-number: QTBUG-85373
Change-Id: Ia96baa673fc1fb88e73ba05a1afb473aa074b37d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add metaType()/setMetaType() methods to be used instead
of the type() methods taking a QVariant::Type.
Change-Id: Ieaba35b73f8061cd83288dd6b50d58322db3c7ed
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since Interbase/Firebird has a limit for column and table names then
this function can be used by QSqlRelationalTableModel to make sure that
the aliases created are within that limit.
Change-Id: I0cb1c65b34befcb3690ccad3f081556dd2691344
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The concerned paragraph is one that is very important as there are a
lot of people building the MySQL and PostgreSQL plugins that are not
successful on the first try. However, this text not being emphazized,
many if not all miss the fact that just re-running qmake will give them
the same result if the cleanup is not applied. This patch makes this
point more visible.
Pick-to: 5.15
Change-Id: Ib2b97e128a5dab3dc6d771b16b5315e4ad95a9b7
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Now that the bound values are kept in placeholder order we can
depend on that and not have to ensure that fieldSerial() would
give us something that is in alphabetical order should it end
up being sorted.
Change-Id: I3a3e443bef150a06f455e18e3502235b1ae4d242
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This enables the order of boundValues to be consistent as with a QMap
it could have been reordered which can be a problem for positional
bindings.
[ChangeLog][QtSQL] Changed signature of QSqlQuery::boundValues() to
return a QVariantList
Fixes: QTBUG-51609
Change-Id: I1c80fa8522fa7352723420b6fc9ec466406315fb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And name the main class QList. That's also the one we document.
This gives less porting pain for our users, and a lot less churn
in our API, as we use QList in Qt 5 in 95% of our API.
In addition, it gives more consistent naming with QStringList and
QByteArrayList and disambiguates QList vs QVector(2|3|4)D.
Fixes: QTBUG-84468
Change-Id: I3cba9d1d3179969d8bf9320b31be2230d021d1a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This does the analog of 46f407126e for the
methods we care about (signals, slots, Q_INVOKABLEs). In addition to the
actual QMetaType, we store an array with offsets so that we later can do
a mapping from methodIndex to metatype.
The newly added QMetaMethod::{return,parameter}MetaType methods can then
be used to retrieve the metatypes.
This does however require that all involved types are complete. This is
unfortunately not a feasible requirement. Thus, we only populate the
metatype array on a best effort basis. For any incomplete type, we store
QMetaType::Unknown. Then, when accessing the metatype, we fall back to
the old string based code base if it's Unknown.
Squashes "moc: support incomplete types" and "Fix compile failures
after QMetaMethod change"
Fixes: QTBUG-82932
Change-Id: I6b7a587cc364b7cad0c158d6de54e8a204289ad4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The version checks for clearItemData() are no longer needed now.
Change-Id: I5052188fb96cf637128662f3442d339820f0f41d
Reviewed-by: David Faure <david.faure@kdab.com>
Qt 5.4 is not documented anymore since quite some time.
Change-Id: I6811ead502178f7acbed8cf450e42d7fd33ae29b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is Qt 6, so Q_DECLARE_SHARED_NOT_MOVABLE_UNTIL_QT6 is the same as
Q_DECLARE_SHARED.
Let's hope we'll collectively get better at detecting missing
Q_DECLARE_SHARED so we won't need a
Q_DECLARE_SHARED_NOT_MOVABLE_UNTIL_QT7 in the future.
Change-Id: I3da9faff4c66b64a3b257309012a2a10a6c6d027
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The fromUtf16(ushort*) and fromUcs4(uint*) overloads are going
to be deprecated. Use the newer fromUtf16(char16_t*) and
fromUcs4(char32_t*) overloads.
As a drive-by, use std::end()/std::size() where applicable.
Change-Id: I5a93e38cae4a2e33d49c90d06c5f14f7cb7ce90c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
The command is deprecated and has no effect apart from generating
a documentation warning.
Change-Id: I30871bfd6975f8268930cce99993a8579242fdb8
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The C Connector does not appear to be offered as a component in the
MySQL 8.0.19.0 installer.
Task-number: QTBUG-82187
Change-Id: I4b1ef83cca68e7bf6dd032ba35c0784354d7fed3
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Cleanup QSqlDriverPrivate/QSqlResultPrivate and their derived classes
in ODBC, MySql, PostgreSQL and SQLite.
Change-Id: I52e69c00cf981b81dde7c3a0370f86f06ef756bb
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Remove the compat SQL plugin names (QMYSQL3, QOCI8, QODBC3, QPSQL7)
since they are not needed and just confuse the user
[ChangeLog][QtSql] The compat plugin names QMYSQL3, QOCI8, QODBC3 and
QPSQL7 are no longer available.
Change-Id: I6d88f449ef3e18881a6970fb374ba0ab074ef302
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
It was deprecated in Qt5 and the replacement signal with three arguments
can be used instead.
Change-Id: I6d0db8d9fa9bea2039c548e32bc39a8173403c3a
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
They were deprecated in Qt4 (TDS) and 5.14 (SQLITE2) so they can be
removed now in Qt6
[ChangeLog][QtSql] Removed obsolete TDS and Sqlite2 drivers
Change-Id: I55118fb03106564d519a99ab55f9b5cf528179f3
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Fix a small typo in the link to vcredist.exe
Change-Id: I8b2724bd01889ac439bcd1a762a7c74df9882492
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
I made a clazy automated check that replaced the use of QVariant::Type
by the equivalent in QMetaType.
This has been deprecated since Qt 5.0, but many uses were not yet removed.
In addition, there was some manual changes to fix the compilation errors.
Adapted the Private API of QDateTimeParser and QMimeDataPrivate
and adjust QDateTimeEdit and QSpinBox.
QVariant(QVariant::Invalid) in qstylesheet made no sense.
But note that in QVariant::save, we actually wanted to use the non-user type.
In the SQL module, many changes were actually reverted because the API
still expects QVarient::Type.
Change-Id: I98c368490e4ee465ed3a3b63bda8b8eaa50ea67e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- QSqlQueryModel docs contained a snippet about QSqlTableModel.
- Snippet #25 was about QSqlTableModel, but it was previously unused.
- This patch ensures that snippet code matches the corresponding text
descriptions.
Change-Id: I2a5ffbe0978ef9b8d0b027db59647b824e52d214
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Conflicts:
src/corelib/tools/qvector.h
Make QVector(DataPointer dd) public to be able to properly merge
5b4b437b30 from 5.15 into dev.
src/widgets/kernel/qapplication.cpp
tests/auto/tools/moc/allmocs_baseline_in.json
Done-With: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Change-Id: I929ba7c036d570382d0454c2c75f6f0d96ddbc01
The QMYSQL plugin can also be build with the MariaDB client libraries
since they are source compatible. But the MariaDB libraries could not be
found on windows because the library name differs. Therefore add the
correct library names and update the documentation to make clear that
MariaDB is supported through the QMYSQL plugin.
[ChangeLog][Sql][QMYSQL] The QMYSQL plugin can now be build with the
MariaDB C connector libs on Windows.
Change-Id: Id99f8be96c4179fd2321b3e61c90bb300c53bb82
Reviewed-by: Marius Kittler <mariuskittler@gmx.de>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Fix the links, remove section about Q_ODBC_VERSION_2 - it wasn't there
since Qt5.0.
Change-Id: I571f5c2cf0f0e2df38638299c26814b510d1a8af
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Update the instructions on how to build and distribute the mysql and
postgresql drivers on windows.
Change-Id: Ie4d50c1c34820680d7496b9544eb00fcee17f8e7
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Add QGenericArray to simplify operations. This class can be shared by
other tool classes. If there is nothing else to share it, we can move
the code onto qvector.h. The one candidate is QList.
All tests pass and valgrind is good.
Change-Id: Ieaa80709caf5f50520aa97312ab726396f5475eb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Move away from using 0 as pointer literal.
Done using clang-tidy. This is not complete as
run-clang-tidy can't handle all of qtbase in one go.
Change-Id: I1076a21f32aac0dab078af6f175f7508145eece0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not all SQL operations support binding values like the PRAGMA
instruction of SQLite. This patch adds a warning for the developer to
make it clearer that binding values cannot be used for everything.
Task-number: QTBUG-80082
Change-Id: Ie1d33815d74a0759a3593df9410b8bad448f6fe9
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
QSqlTableModelPrivate::ModifiedRow::rec returns a const &
so use it instead doing a copy. QSqlRecord is cheap to copy constructor
but not having to do it is faster
Change-Id: Iad6e79fcdcdf380ce681fe9426436f8cb98be553
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
To get less diffs for next merges and pro2cmake changes.
Change-Id: I7fb5ff34bb884072a9964e8e3488c69f4290fca2
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QSqlDriver::notifcation() signal is available in two versions since Qt4
times. They are both emitted in the corresponding places which is
useless.
Therefore deprecate the one-arg version.
[ChangeLog][QtSql][QSqlDriver] The one-arg version of
QSqlDriver::notifcation() is now deprecated.
Change-Id: Ie09aa0cc952f4d854c6fb617b37b9047a3194ee3
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Brown paper bag for me, don't use a comma to separate parameters when
calling a function.
Change-Id: I21e16142fab4fd1c2714df13cd6a892b036e899a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This fixes the calls to add_qt_docs to include the target.
Change-Id: I2c4c807bca8faa48bb49f4b8710035f21abfca0e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some modules define their own manually-maintained lists, and we can rely
on the headers generated by each module to include in the pch as well
e.g. QtCore/QtCore.
There's also e.g. QtWidgetDepends for QtWidgets, but this only
works for modules, not for tools, examples or other applications.
For now we'll use the Qt<Module>/Qt<Module> headers for the
modules we depend on.
Building with PCH can be disabled with -DBUILD_WITH_PCH=NO, and it only
works for versions of CMake newer than 3.15.20190829.
Change-Id: Iae52bd69acfdfd58f4cd20d3cfa3c7f42775f732
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There were some changes done in pro2cmake, so regenerate the main
qtbase modules to keep everything up to date.
Some new whitespace got added.
Some special cases were removed (ZLIB).
Some opengl code got moved around.
Some plugin types were added.
And some other minor things.
Change-Id: Ie8cba4a9aa6b4b163c39d6cf546ea9e0bfc05c01
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This commit introduces infrastructure work to allow static builds of Qt
to handle importing of plug-ins.
Change-Id: Ife0ca3ca7276ea8ec96fe0eb6adf934fad7620ec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Instead of generating .html page for each file in an example
project, generate links to code.qt.io, under the correct
path and branch, where the user can browse the example source.
Store all URLs under QT_INSTALL_DOCS/config where other qt5
submodules can access them. The repository name appears in
the URL, so we cannot define a single URL for all modules.
Task-number: QTBUG-74391
Change-Id: I63d4d6d2c352877797b1ee8e057d48c0cd789bff
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Each module that has publically declared classes or structs
that are not meant to be documented is given a dontdocument.qdoc
file to tell qdoc that these classes are not meant to be
documentented. Then qdoc will not print warnings about missing
\class comments for these classes and structs.
Change-Id: I9195f0b546032e1c7642c9da34d85a0a4a9bfb08
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The actual variable that contains the architecture is
TEST_architecture_arch. TEST_architecture only contains the value
if the test was performed or not.
Fix the conversion script and all the generated files.
Change-Id: Icb3480832cab894948f4fef03b8bc8187cab6152
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
QSqlError::text() returns single space if QSqlError is not valid. In
addition, it adds space in case one of driverText or databaseText
is empty.
Change condition upon which space is added between databaseText and
driverText, and update unit test to cover these cases.
Fixes: QTBUG-74575
Change-Id: I52cce9b0287a523d7ff9059cff38bcd8b26eb303
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Mark QSqlite2 plugin as obsolete so it can be removed with Qt6. The last
sqlite2 release was 2005 so it's time to remove this plugin in Qt6.
[ChangeLog][QtSql][SQlite2] Marked QSQLITE2 plugin as obsolete - it will
be removed with Qt6 together with the QTDS plugin
Change-Id: I9861331d4eb2b13f38b9e0e09ad9472b70e9b6e2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
As the non prefixed variants are deprecated
Change-Id: I2ba09d71b9cea5203b54297a3f2332e6d44fedcf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QRegExp includes can be found in several files where there's not even a
use of the class. This patch aims to avoid needless includes as well as
follow the "include only what you use" moto.
This patch removes a QRegExp include from the QStringList header which
means that there is likely going to be code breaking since QStringList
is used in many places and would get QRegExp in.
[ChangeLog][Potentially Source-Incompatible Changes] qstringlist.h no
longer includes qregexp.h.
Change-Id: I32847532f16e419d4cb735ddc11a26551127e923
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only the first successful query was stored in the variable. When a new
query is executed the function QSqlResult::setActive was not replacing
the last executed query.
Fixes: QTBUG-28883
Change-Id: Ib4938c42e6264f9edd0764b4a392da7988f68fc0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Replace 0 with \nullptr in the documentation.
As a drive-by also replace some 0 with nullptr in the corresponding
code.
Change-Id: I914b6b2151554c06acc2d244eff004524cbb9a82
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Since some databases are case sensitive if part of the query is quoted,
then we should ensure that all instances of the table name are escaped
unless the test is delibrately testing the non-escaped case.
As a result, this commit also removes some expected failures pertaining
to PostgreSQL and also adds an entry to the list of tables being dropped
when a test is finished.
[ChangeLog][Sql][PostgreSQL] QSqlDatabase is now stricter about table
names when used with record() and primaryIndex(). If the tablename was
not quoted when it was created, then the table name passed to record()
and primaryIndex() needs to be in lower case so that PostgreSQL is
able to find it.
Fixes: QTBUG-65788
Change-Id: Id1f54cb66b761c39edf858501b730ede7eec1fd3
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QSqlRelationalDelegate::setEditorData() does not compile when
QT_NO_CAST_FROM_BYTEARRAY is defined. Since it's a public header this
will break user code.
Fix it by calling QByteArray::data() instead of relying on the
implicit cast.
Fixes: QTBUG-72764
Change-Id: I9c111dd25f48c9c9780d9f9a5b6b75eed0c8d6ed
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Since QStyledItemDelegate should be preferred over QItemDelegate the
documentation should point to QStyledItemDelegate instead.
Also mark some internal classes which derive from QItemDelegate so they
will not be forgotten during Qt6 porting.
Change-Id: I2dd17feedf8593afac5ca16d2546e1f0bc0250ae
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Since QSqlDatabase::database() cannot be used to access another database
from another thread, then the overload is provided to make it possible
to clone with just the connection name. This will handle the cloning
internally safely then.
Fixes: QTBUG-72545
Change-Id: I861cc5aa2c38c1e3797f6f086594a1228f05bada
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Change-Id: I9bf7d61a65950eafcfe6b3ea9c437e353ff7b2ed
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The code snippets retrieving the native database driver handles was
using qstrcmp() wrong since that is returning 0 when the strings are
equal. In some snippets there was even a plain char * comparison which
would not work at all.
Fix all the places by correctly using qstrcmp() and replace the checks
for the valid pointer by not checking for 0.
Fixes: QTBUG-70598
Change-Id: I5c53dcfc51c958203fc60fa6a23dd6b27faa1d96
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
A virtual method clearItemData was added to QAIM for Qt6.
This patch implements that method to all Qt concrete models for which
it makes sense.
Task-number: QTBUG-69616
Change-Id: If980fcfc36f723128bc56ec4587c5c3a338dbbcc
Reviewed-by: David Faure <david.faure@kdab.com>
Christian Ehrlicher
Joerg Bornemann
Kai Koehne
Jerome Pasion
Zhang Sheng
Andy Shaw
Topi Reinio
Lars Knoll
Alexandru Croitor
Volker Hilsheimer
Nico Vertriest
Paul Wicking
Marcel Krems
Friedemann Kleint
Allan Sandfeld Jensen
Samuel Gaist
Jarek Kobus
Fabian Kosmale
Marc Mutz
Qt Forward Merge Bot
Simon Hausmann
Sze Howe Koh
Liang Qi
Leander Beernaert
Olivier Goffart
Thiago Macieira
Albert Astals Cid
Mårten Nordheim
Tasuku Suzuki
Jean-Michaël Celerier
Giuseppe D'Angelo
Tobias Hunger
Martin Smith
Vincas Dargis
Kevin Funk
Jesus Fernandez
Tobias Hunger
Luca Beldi