This saves (mostly in corelib/time/) some complications that used to
arise from needing different code-paths for different time-specs.
Task-number: QTBUG-108199
Change-Id: I5dbd09859fce7599f1ba761f8a0bfc4633d0bef9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the full set of substringing operations:
- mid/left/right (old-style)
- sliced/first/last (new style)
- chop/chopped/truncate
The implementation is copied from QUtf8StringView, adjusted to use
sliced() instead of the (ptr, n) ctor, so we need to deal with the tag
twiddling only once, in sliced().
The documentation is also copied from QUtf8StringView.
[ChangeLog][QtCore][QAnyStringView] Added substring functions
sliced(), first(), last(), chop()/chopped(), truncate().
Change-Id: Ief454e9694519e97d9146fa84bc05dda1dded046
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Same fix as in tst_qbytearray's QCOMPARE() in
cb9715557c.
Pick-to: 6.4 6.2
Change-Id: I2222d9015ae7121a2fbcf5b936b27de20e873064
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For both the [4, 7] and [8,15] length cases, we can perform the same
technique: perform two overlapped loads, zero-extend, then perform two
overlapped stores. The 8-character case could be done in a single
load/store pair, but is not worth the extra conditionals. And it should
have the exact same performance numbers whether we use non-overlapping
4-character operations or completely-overlapping 8-character ones (I
*think* the full overlap is actually better).
The 4-character operation is new in this commit. That reduces the
non-vectorized, unrolled to at most 3 characters.
Change-Id: Ib42b3adc93bf4d43bd55fffd16c257ada774236a
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Because they are too convenient to leave out.
Change-Id: I844cfb794ce0f575c2c65075d9051b0b878a434f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Overloading insert is a bit tricky since the size might change after
the conversion so either the tail has to be moved twice or a temporary
buffer is needed. For now, add an ineffective but simple overload as in
the case of the const char *s overload, and do the performance
optimization in a follow-up task (QTBUG-108546).
[ChangeLog][QtCore][QString] Added insert(QUtf8StringView) overload.
Task-number: QTBUG-103302
Change-Id: If01c216ff626da29abb43eb68d4de82824f3bfba
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The += operator is already overloaded to handle QStringView and
QLatin1String - add the missing QUtf8StringView overload.
[ChangeLog][QtCore][QString] Added operator+=(QUtf8StringView)
overload.
Task-number: QTBUG-103302
Change-Id: Iec6940bad7866310c826a130b98accebc3c82aa8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Add the missing overload, among other things it is needed to
implement QTBUG-103302.
[ChangeLog][QtCore][QString] Added append(QUtf8StringView)
overload.
Task-number: QTBUG-103302
Change-Id: I576f73c1919e3a1f1a315d0f82c708e835686eb1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Also add optimizations for more string comparisons and add tests and
benchmarks.
[ChangeLog][QtCore][QString] Added utf-8 case-insensitive comparisons
Fixes: QTBUG-100235
Change-Id: I7c0809c6d80c00e9a5d0e8ac3ebb045cf7004a30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I981213c296bafc81663b08c0f1f339bbd8a96485
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I3d81cf10b7eb74433ce5bea9b92ce6bce1230dcd
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Note that this also affects operator_pluseq_data, which is basically
a wrapper around append_data.
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I09ed950e3f0e71ae9ae85a455f42e130887f1109
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Both QStringView and QAnyStringView implicitly convert from any
container with a fitting value_type, and working std::data, std::size,
std::begin and std::end.
Add these missing operations (and complementary ones) to XmlStringRef,
so it implicitly converts to QStringView and QAnyStringView, too.
Add a check to that effect and remove the now-superfluous operator
QStringView().
Task-number: QTBUG-103302
Change-Id: I89d586cf64447a82022e06d546d7ee8339fc6dc7
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
... where checks for QByteArray existed before.
The checks we can't add are
- left/right/mid (legacy APIs not implemented in QBAV)
- several relational operators, d/t ambiguities. Created
QTBUG-108805 to track these.
Task-number: QTBUG-108805
Pick-to: 6.4 6.2
Change-Id: I30cc9b29a228d69d32af51234f2c28221478a75c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It's not intuitive, so check lest people break it.
Pick-to: 6.4 6.2
Change-Id: I2435cd69be7b77a6ae59cdc7b5fb99658cfc42fd
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Underflows should be treated the same as overflows.
Fixes: QTBUG-108628
Change-Id: I23aa7bbe1d103778cefca08bd3e584e72f306583
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Rework QSimpleParsedNumber to store a qsizetype whose sign serves as
ok flag (positive is ok, zero and negative are not) and magnitude is
the number of characters used. This replaces an endptr that was set to
null to indicate !ok, but that deprived us of end-of-parse
information, which is needed for number-parsing. In particular, JS's
parsing of numbers accepts overflow (where qstrntod() flags it as
invalid) as infinity; so qstrntod() does need to say how long the
overflowing (but JS-valid, none the less) number-text was.
Modify all callers of functions using this (recently-introduced) type
and add tests that fail without this fix.
Fixes: QTBUG-108628
Change-Id: I416cd213e1fb8101b1af5a6d43615b970a5db9b4
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
- If this string is not shared, modify it directly
- If this string is shared, instead of detaching copy the characters
from this string, except the ones that are going to be removed, to a
new string and swap it. This is more efficient than detaching, which
would copy the whole string including the characters that are going
to be removed.
This affects:
remove(const QString &str, Qt::CaseSensitivity cs)
remove(QLatin1StringView str, Qt::CaseSensitivity cs)
Adjust the unittests to test both code paths.
[ChangeLog][QtCore][QString] Improved the performance of
QString::remove() by avoiding unnecessary data copying. Now, if this
string is (implicitly) shared with another, instead of copying
everything and then removing what we don't want, the characters from
this string are copied to the destination, except the ones that need to
be removed.
Task-number: QTBUG-106181
Change-Id: Id8eba59a44bab641cc8aa662eb45063faf201183
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This tests that strings using the first Unicode code-point of such a
multi-character token don't get recognized as "valid" number strings.
This would catch an implementation issue if the parsing code
mistakenly matched against only the first code-point of each "single
character" token.
It also adds tests of integer formatting, with multi-character sign,
and reworks some QStringView().toString()s to use u"..."_s.
Task-number: QTBUG-107801
Change-Id: I7b868ce2955bb322b3ecfc200438a21437090a0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Basic unitttest and one to verify erase returns iterator, not
const_iterator.
Change-Id: I44c3b82b4686ff3809648063376f5e36fb7e181d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- If the string isn't shared, don't call detach(), instead remove characters
matching ch, and resize()
- If the string is shared, create a new string, and copy all characters
except the ones that would be removed, see task for details
Update unittets so that calls to this overload of remove() test both code
paths (replace() calls remove(QChar, cs) internally).
Drive-by change: use QCOMPARE() instead of QTEST()
Task-number: QTBUG-106181
Change-Id: I1fa08cf29baac2560fca62861fc4a81967b54e92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- If this bytearray isn't shared call d->erase() as needed
- if it's shared, instead of detaching, create a new bytearray, and copy
all characters except for the ones that would be removed
See task for details.
Adjust unittest to test both code paths.
Task-number: QTBUG-106182
Change-Id: I806e4d1707004345a2472e056905fbf675f765ab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
- If this string isn't shared, don't call detach, instead use ->erase() as
needed
- If this string is shared, create a new string, and copy all elements
except the ones that would be removed, see task for details
Update unittest to test both code paths.
Task-number: QTBUG-106181
Change-Id: I4c73ff17a6fa89ddcf6966f9c5bf789753f6d39e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With the introduction of QAnyStringView, overloading based on UTF-8
and Latin-1 is becoming more common. Often, the two overloads can
share the processing backend, because we're only interested in the
US-ASCII subset of each.
But if they can't, we need a faster way to convert L1 into UTF-8 than
going via UTF-16. This is where the new private API comes in.
Eventually, we should have the converse operation, too, to complete
the set of direct conversions between the possible three
QAnyStringView encodings L1/U8/U16, but this direction is easier to
code (there are no error cases) and more immediately useful, so
provide L1->U8 alone for now.
Change-Id: I3f7e1a9c89979d0eb604cb9e42dedf3d514fca2c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some of the entries in QLocale's single_character_data[] table are
not, in fact, single characters; some RTL languages include
bidi-markers in some of the fields, some locales use some denotation
of "times ten to the power" as the exponent separator. There may be
further complications, but let's just get some tests in that verify we
are correctly serializing numbers in these locales. Include some
parsing tests to show that we are indeed failing them.
Task-number: QTBUG-107801
Change-Id: Iab9bfcea5fdcfcb991451920c9531e0e67d02913
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
%.f should be handled like %.0f. You probably don't want it for strings,
though.
Fixes: QTBUG-107991
Pick-to: 6.2 6.4
Change-Id: I07ec23f3cb174fb197c3fffd1721a941fbcf15e1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There were two copies of the 0x1D157 row and we can't remember why.
So change one of them to the Chakma digit 3 (a spiral) and annote all
three test-cses with what meaning Unicode assigns to them.
Change-Id: I95837588bd5944f7f2c39c8438d9076e844e4dd0
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
/Zc:lambda seems buggy. Although in my experiments it works well
for 99% Qt repos, it seems some tests will trigger the bug and it
also blocks some new commits. So disable it for now, it's not stable
enough.
Now that this check is disabled, the workaround for tst_qstringapisymmetry
is also not needed anymore, so remove the workaround as well.
Partially reverts commit 8cb832090a
Change-Id: Icf0ecbbaa6262522470e5f5dea05705985ab18f1
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The zlib convenience API we've been using so far has two problems:
- On Windows-64, where sizeof(long) == 4, the use of ulong for sizes
meant that we could not compress data compressable on other 64-bit
platforms (Unix). While zstream also uses ulong, being a stream API,
it allows feeding data in chunks. The total_in and total_out members
are only required for gzip compression and are otherwise just
informational. They're unsigned, so their overflow does not cause
UB. In summary, using zstream + deflate() allows us to compress more
than 4GiB of data even on Windows-64.
- On all platforms, we always allocated the output buffer in such a
way as to accommodate the pathological case of random, incompressible
data, so the output buffer was larger than the input. Using zstream
+ deflate(), we can start with a smaller buffer, then let zlib pick
up where it left off when it ran out of output buffer space, saving
memory in the common case that compression meaningfully reduces the
size. To avoid the first few rounds of reallocations, we continue to
use zlib's compressBound() for input less than 256KiB.
This completely fixes the compression side of QTBUG-106542 and
QTBUG-104972.
Pick-to: 6.4 6.3 6.2
Fixes: QTBUG-104972
Fixes: QTBUG-106542
Change-Id: Ia7e6c38403906b35462480fd611b482f05a5c59c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The tests for indexOf() and lastIndexOf() had duplicate data row tags,
due to only using the needle and haystack, although some tests
differed only in start position. Include start position where needed.
Change-Id: I197d415265ab1a805f2d36fb88aec92ea8646f7a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Enclosing one string in each substring of another does not need to
repeat the empty substring of the latter. Extracting the empty
substring from different positions doesn't get different results.
In the process, tidy up the code a bit.
Change-Id: Ic66febbdadeaac0c466f4f1174d831a991d31e20
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
There were two copies of the same line in mid_data(), leading to
duplicated data row tags.
Change-Id: Ia21e855ff781b13fe18c932cff48cb0aabd12750
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The zlib convenience API we've been using so far has two problems:
- On Windows-64, where sizeof(long) == 4, the use of ulong for sizes
meant that we could not uncompress data compressed on other 64-bit
platforms (Unix). While zstream also uses ulong, being a stream API,
it allows feeding data in chunks. The total_in and total_out members
are only required for gzip compression and are otherwise just
informational. They're unsigned, so their overflow does not cause
UB. In summary, using zstream + inflate() allows us to decompress
more than 4GiB of data even on Windows-64.
- On all platforms, if the size hint in the header was too short, we'd
double the output buffer size and try again, from scratch. Using
zstream + inflate(), we still need to reallocate, but we can then
let zlib pick up where it left off when it ran out of output buffer
space. In all but the most pathological cases, copying the
already-decoded data instead of re-decoding it again should be
faster, esp. if QArrayData uses realloc() instead of malloc() +
free() to grow the buffer.
We also now directly allocate at least as much output buffer as we
have input, to cut the first few rounds of reallocations when the
expectedSize was created, as qCompress still does, using modulo
arithmetic mod 4GiB instead of saturation arithmethic.
Factor the growing of the output buffer into a wrapper function,
flate(), which can be reused when porting qCompress().
This completely fixes the uncompression side of QTBUG-106542 and
QTBUG-104972.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104972
Task-number: QTBUG-106542
Change-Id: I97f55ea322c24db1ac48b31c16855bc91708e7e2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
For the full list, please refer to [1].
Needed to change the qstringapisymmetry unit test:
In theory we don't need the array to be static and it did compile
without any problems so far, indeed. However, with this patch applied,
MSVC complains that the lambda function below can't access the array.
I don't understand why, because we use [&] in the lambda and it should
capture all the variables in theory, but in reality it failed to
capture this variable in the end. And making the variable static
solves this issue. Maybe it's a MSVC bug.
Already tested locally. Most Qt repos build without any issues,
only very few repos are not tested, as my local environment
can't build them.
[1] https://docs.microsoft.com/en-us/cpp/build/reference/zc-conformance?view=msvc-170
Change-Id: I658427aa171ee1ae26610d0c68640b2f50789f15
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This corresponds to Unicode version 15.0.0.
Added the following scripts:
* Kawi
* Nag Mundari
Full support of these scripts requires harfbuzz version 5.2.0,
this version adds support for Unicode 15.0:
https://github.com/harfbuzz/harfbuzz/releases/tag/5.2.0
Fixes: QTBUG-106810
Change-Id: Ib06c526e49b0f01ef9f21123bcf875c6b19f2601
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There were two data8 rows; and no data9, so that was easy to fix.
Change-Id: I8191de142e1a3be57bf1ad97e63d5780f2859fea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two test cases were called "base 2, negative"; one of them use -1 as
value, so s/negative/minus 1/ for it.
Change-Id: Ia5da3952d93976262cc8423d4e75ec19dab9a088
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using simply the pattern didn't work so well when some patters are
used repeatedly, on different haystacks. So include the haystack
in the tag name. Remove one straight up duplicate row.
Change-Id: Ib46364581f23c493e83d75e6d04ab09e4329a3a5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
One "empty" test was base ten, the other left the code to work out the
base. Change the latter's name to reflect that difference.
Change-Id: I4918eb0d293420df315d86e532787950b8f05be8
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The test-case for 0.0001 with precision 0 has the same expected text
as that for 0.0 with the same precision; which lead to QBA's test of
it getting a duplicated data tag. Add an optTitle for the one that
isn't precise to deduplicate.
Change-Id: I03600e2af43f6d11b53e05e8027924c92ed4db89
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It first added a column, then some rows, then called
prependExtended_data(), which expects to be called first in a data
function and starts by adding the same column. So put that first and
drop the duplicate addition of the column.
Change-Id: Ia5cf86f821608e78f0e4872db2b3167ef81cc59e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Before searching, foldCase the first up to 256 characters, and use this
buffer to compare against the haystack. If the needle is larger than the
buffer, compare the rest of the needle against the rest of the haystack
for every potential match. The buffer is placed on the stack and must be
refolded for each search, but this change does not break the API.
This is faster than the old implementation, except if the needle is long
and it is found near the beginning of the haystack, or if the needle is
long and it is not found in a short haystack where few comparisons are
done and hence few case foldings were needed in the old implementation.
Benchmarking using tst_bench_qstringtokenizer tokenize_qstring_qstring
shows an improvement for the the total testcase and usually for each
individual test.
Fixes: QTBUG-100239
Change-Id: Ie61342eb5c19f32de3c1ba0a51dbb0db503bdf3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And remove the platform-specific code.
fenv is available since c++11.
Change-Id: Ia5540be93b54117d4b5e9c7579100039c151dcc5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The collection of translations available to us need not have anything
to do with whether CLDR has matching data, so preserve the system UI
language list's entries as they are, rather than forcing them through
the QLocale constructor's exercise of likely sub-tag rules.
Instead, simply parse the given locale tags to QLocaleId instances and
use these in the likely-subtag processing to determine what other
entries to add to the list in addition to those supplied by the
operating system. Since going via QLocale did usually supply a
territory, that was included in the BCP 47 name, it's now possible for
the given entry to lack the language_territory name, so be sure to add
that if missing.
This incidentally reduces heap traffic and saves a fair deal of hidden
likely-subtag processing in calls to the constructor and bcp47Name().
Expand testing of QLocale::uiLanguages(), both plain and system. In
the process, cross-link the two closely-related tests, move a comment
on one's _data() to the other's, where it really belongs, and add
reporting of the actual lists on failure. Enable MySystemLocale to
remember the requested locale's ID, before likely sub-tag processing,
so that we can make query() report results for language, script and
territory as requested, to ensure the fake system locale really does
match what was requested. The new german-britain test failed without
it, because there is no de-GB locale in CLDR.
Task-number: QTBUG-99531
Change-Id: Ide041577772c442a4413e3b9a590e11140c48f49
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Have QSystemLocale manage a stack, so that tests can install an
over-ride for the actual system-specific one reliably and restore the
system-specific one when finished. Leave the QSystemLocaleSingleton
out of the stack, all the same. In the process, mark the QDoc comments
for QSystemLocale all as \internal, since this is not public API.
Change-Id: I8faed49780215e42f32be10cf936c32bb46105bf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When the system locale is en_DE, macOS seems to think we should use
en_GB as the right translation. While that probably is a sensible
choice in the absence of an en_DE translation, we should definitely
use the en_DE translation if available, especially if en_GB isn't
available (which lead to a fall-back to de_DE, given later entries in
macOS's list). So prepend the system locale's own pcp47Name() if it
(isn't the C locale and) is missing from what we would otherwise have
used for uiLanguages(), after likely sub-tag perturbations.
Add a test simulating (some approximation to) what macOS was doing
that would have caught this case; and add a scope-guard reporter to
the test to report what shows up when lists don't match.
Fixes: QTBUG-104930
Pick-to: 6.4 6.4.0 6.3 6.2 5.15
Change-Id: I116234708067e1717d9157aebc84da76e04a9f38
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Certain masks are not supported outside 32-bit x86, and will assert on
x64.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-106000
Change-Id: Ic9f58e5a19c1db3309edeb5ec529e7a78c929665
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This includes QDBusReply, QProperty, and QStringBuilder expressions.
The new constructor subsumes the QStringBuilder case without requiring
jumping though hoops to delay the definition of the ctor the way we
had to for the explicit QStringBuilder constructor, so remove the
explicit QStringBuilder one again.
[ChangeLog][QtCore][QAnyStringView] Can now be constructed from
anything that implicitly converts to either QString or QByteArray.
Fixes: QTBUG-105389
Change-Id: I0e584dd3e20d591381609a3329ef47cec7356ecc
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
And include qcore_mac_p.h where needed.
Task-number: QTBUG-99313
Change-Id: Idb1b005f1b5938e8cf329ae06ffaf0d249874db2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* QVariant::Type -> QMetaType::Type.
* Guard the test for deprecated fromUtf16(const ushort *) overload with
QT_DEPRECATED_SINCE check.
* Use fromUtf16(const char16_t *) overload in other places.
As a drive-by: fix formatting in the affected lines.
Task-number: QTBUG-104858
Change-Id: I9fa3a935bca36e97f934f673e2fc07b451c72872
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The value will be propagated from Qt build.
Task-number: QTBUG-104858
Change-Id: Iae2c32c3037438f41b92f9ee28004f30eb4e3210
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DISABLE_DEPRECATED_BEFORE macro is
renamed to QT_DISABLE_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the new
name is not defined.
Task-number: QTBUG-104944
Change-Id: Ifc34323e0bbd9e3dc2f86c3e80d4d0940ebccbb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Android kills this test case which tries to use too much memory,
or it times out.
Pick-to: 6.4 6.3 6.2
Task-number: QTQAINFRA-4748
Change-Id: Ifce92533d50f4c463ee10fe80e7654ad16172a35
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The _data function is useless without its test function (and it's not
used in other _data functions).
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I7aa6006ed1a9d89008577b750af4ea717dae237f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The std::boyer_moore_searcher is buggy for older verions of Microsoft's
STL, and missing in AppleClang's libc++ with an inefficient fall back.
Fixes: QTBUG-100236
Change-Id: Ic3cc916946546d2ef78456cd15e1425d957b989d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Also document the (seldom helpful) handling of over-long repeats of a
format. Add test to QDateTime and amend QLocale test.
[ChangeLog][QtCore][QDateTime] Doubling the 'z' format in a date-time
or time format string now produces the same output as a single 'z'.
Previously, this would have produced two copies of the milliseconds
field (eliding any trailing zeros in each). Contrast with 'zzz', which
produces the full milliseconds field, including any trailing zeros.
Change-Id: I4c60462b062fee4079370096d745c191c1939506
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
QRegularExpression::match (and globalMatch) is currently overloaded
for QString and QStringView. This creates a subtle API asymmetry:
QRegularExpression re;
auto m1 = re.match(getQString()); // OK
auto m2 = re.match(getStdU16String()); // Dangling
This goes against our decision that every time that there's a possible
lifetime issue at play, it should be "evident". Solving the lifetime
issue here is possible, but tricky -- since QRegularExpression
is out-of-line, one needs a type-erased container for the input
string (basically, std::any) to keep it alive and so on.
Instead I went for the simpler solution: deprecate match(QStringView)
and introduce matchView(QStringView) (same for globalMatch). This
makes it clear that the call is matching over a view and therefore
users are supposed to keep the source object alive.
Drive-by, remove the documentation that says that the QString
overloads might not keep the string alive: they do and forever will.
[ChangeLog][QtCore][QRegularExpression] Added the matchView()
and globalMatchView() functions that operate on string views.
The match(QStringView) and globalMatch(QStringView) overloads
have been deprecated.
Change-Id: I054b8605c2fdea59b556dcfea8920ef4eee78ee9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was an explicit int cast in fromBase64Encoding() which was never
ported to qsizetype and therefore truncated the result.
Fix by removing the int cast.
Add a test, optimize it for as low memory usage as possible, given we
need to work in input and output data each in excess of 2GiB.
Fixes: QTBUG-104985
Pick-to: 6.4 6.3 6.2
Change-Id: I9c0924957e62e5cb3003132cd811b8b0315d8ac1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The tst_QByteArray test redefines the QCOMPARE macro to check the LHS
to be NUL-terminated. Because the code was never ported from int to
qsizetype, it fails for QByteArrays of size > 2GiB.
Fix by porting to qsizetype.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104985
Change-Id: Ib3951b0efed5f734ae1324ea2d455bb7762fb9c4
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since wasm doesn't like filesystems that well, we omit this test in
tst_qchar for wasm, this allows us to still run the test without the
case where it needs to read the normalization file.
Change-Id: I37e54d97e119f94e1a9ca53917d0b93183321899
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QString has several functions taking a QRegularExpression: indexOf(),
contains(), and so on. Some of those have an out-argument of type
QRegularExpressionMatch, to report the details of the match (if any).
For instance:
QRegularExpression re(...);
QRegularExpressionMatch match;
if (string.contains(re, &match))
use(match);
The code used to route the implementation of these functions through
QStringView (which has the very same functions). This however opens
up a lifetime problem with temporary strings:
if (getString().contains(re, &match))
use(match); // match is dangling
Here `match` is dangling because it is referencing data into the
destroyed temporary -- nothing is keeping the string alive. This is
against the rules we've decided for Qt, and it's also asymmetric with
the corresponding code that uses QRegularExpression directly instead:
match = re.match(getString());
if (match.hasMatch())
use(match); // not dangling
... although we've documented not to do this. (In light of the decision
we've made w.r.t. temporaries, the documentation is wrong anyways.)
Here QRE takes a copy of the string and stores it in the match object,
thus keeping it alive.
Hence, extend the implementation of the QString functions to keep a
(shallow) copy of the string. To keep the code shared as much as
possible with QStringView, in theory one could have a function taking a
std::variant<QString, QStringView> and that uses the currently active
member. However I've found that std::variant here creates some abysmal
codegen, so instead I went for a simpler approach -- pass a QStringView
and an optional pointer to a QString. Use the latter if it's loaded.
QStringView has some inline code that calls into exported functions, so
I can't change the signature of them without breaking BC; I'm instead
adding new unexported functions and a Qt 7 note to unify them.
Change-Id: I7c65885a84069d0fbb902dcc96ddff543ca84562
Fixes: QTBUG-103940
Pick-to: 6.2 6.3 6.4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that QStringConverter can handle non UTF encodings through ICU,
add a way to get a decoder for arbitrary HTML code.
Opposed to QStringConverter::encodingForHtml(), this method will
try to create a valid string decoder also for non unicode codecs.
Pick-to: 6.4
Change-Id: I343584da1b114396c744f482d9b433c9cedcc511
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds support for additional codecs to QStringConverter when ICU is
available.
We store the converter in the state (d[0]), and its canonical name in
d[1]. We need the name there, as in the clear function we close the
UConverter, and set the pointer to null. Consequently, the actual
conversion functions might need to re-open the converter again. The
advantage of this approach is that clear is used in the destructor of
State, and with this approach we properly clean up the state.
There is however a disadvantage: The clear function was so far also used
for resetting the state when QStringConverter::resetState . Discarding
the whole Uconverter for that is however rather costly. For that reason
we modify resetState to call a new function, State::reset. For existing
converters, it behaves the same as clear; for the ICU based converter,
we call the more efficient ucnv_reset. Code compiled against Qt 6.4 can
benefit from this more efficient version; code compiled against older Qt
versions will continue to work, as the conversion functions can just
recretate the converter from the name.
We can distinguish between ICU and non-ICU converters by checking if the
UsesIcu flag is set.
QStringConverter::name is changed to return the name stored in d[1]. The
interface of the ICU converter has a dummy name, so code using the old
name function from QT < 6.4 still returns something, namely a message
asking the user to recompile.
The function is moved out of line, as we need to check for the private
ICU feature, and want to avoid having that check in the public header.
As the QStringConverter ctor taking a name now can allocate memory, it
can no longer be noexcept. Removing the noexceptness is safe, as it was
only added after Qt 6.3.
Note that we cannot extend the API consuming or returning Encoding, as
we use Encoding values to index into an array of converter interfaces in
inline API.
Further API to support getting an ICU converter for HTML will be added
in a future commit.
Currently, the code depending on ICU is enabled at compile time if ICU
is found. However, in the future it could be moved into a plugin to
avoid a hard dependency on ICU in Core.
[ChangeLog][Corelib][Text] QStringConverter and API using it now
supports more text codecs if Qt is compiled with ICU support.
Fixes: QTBUG-103375
Change-Id: I7afb92fc68ef994179ebc7a3aa73beebb1386204
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We implicitly checked it, because, in C++20 builds, the non-equality
relational operators are synthesized from it by the compiler, and we
test those, but we didn't check that <=> returns strong_ordering.
We now do.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104108
Change-Id: Ieb19a2d4cb2d600d884f4e2e89e98c6187e23872
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This allows to defer the toString() invocation until it is really
needed, and so allows to speed-up the test execution.
I was testing a release shared developer build, running
tst_QStringApiSymmetry 10 times before the change, and 10 times after
the change, and then taking the average execution duration, as
reported in the log.
Before the change (using QCOMPARE): 51ms
After the change (using QCOMPARE_EQ): 45ms
As we see from the results, the benefit is around 10%.
Task-number: QTBUG-98873
Task-number: QTBUG-98874
Change-Id: Ifcfbcca1f2c1eaf82c7f1a9098fa1512a269cbf8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Attempting to use an invalid QStringConverter would so far have resulted
in a crash, as we would dereference the null iface pointer.
Fix this by inserting adequate checks, and ensure that hasError returns
true if we attempt to en/decode with an invalid converter.
Pick-to: 6.2 6.3
Change-Id: Icf74bb88cd8c95685481cc0bd512da99b62f33e6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There are no commented out test cases remaining, so the normal
test vectors are identical to full test vectors.
Fixes: QTBUG-97537
Pick-to: 6.3
Change-Id: I987f178f192e1c8e2d998d36499fdce84f237e77
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
UAX #14, revision 45 (Unicode 13) has changed rule LB30 to only
trigger if the open parentheses is non-wide:
(AL | HL | NU) × [OP-[\p{ea=F}\p{ea=W}\p{ea=H}]]
This fixes the remaining 24 line break tests.
Task-number: QTBUG-97537
Pick-to: 6.3
Change-Id: I9870588c04bf0f6ae0a98289739bef8490f67f69
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Implement part of LB30b introduced by UAX #14, revision 47
(Unicode 14.0.0):
[\p{Extended_Pictographic}&\p{Cn}] × EM
This fixes one line breaking test.
Task-number: QTBUG-97537
Pick-to: 6.3
Change-Id: I3fd2372a057b7391d8846e9c146f69a54686ea61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Word breaking rule WB3d should not be affected by WB4.
This fixes the remaining word break test.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I99aee831d7c54fafcd2a9d526a3e078b12c5bfad
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Disable break between sequences of WSegSpace characters (rule WB3d,
introduced in UAX #29, version 33, Unicode 11.0.0). Also disable breaks
between WSegSpace and (Extend | Format | ZWJ) due to rule WB4.
Adjust "words4" test to take the above changes into account (space
character belongs to WSegSpace).
Mention the full class name in a comment inside the word break table.
This fixes 34 word break tests.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I7dfe8367e45c86913bb7d7fe2adb053711978487
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This rule was simplified in version UTS #14 version 45 (Unicode 13.0.0)
to read:
× IN
Re-enabled 28 fixed line break tests.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I1c5565a8c1633428c22379917215d4e424ff0055
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Adjust implementation of rule LB8a of UAX #14. The rule was changed
in version 41 (corresponding to Unicode 11.0.0):
ZWJ × (ID | EB | EM) ⇒ ZWJ ×
Fixing this rule fixes 9 line break tests. Those are re-enabled.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I1570719590a46ae28c98ed7d5053e72b12915db7
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Simplifies the test a little.
Pick-to: 6.3
Change-Id: I77c8221eb2824c369feffffd16f0a7fc44215aaf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The utf8.txt file was only 21 bytes and contained exactly two non-ASCII
characters. It wasn't very good.
This commit brings back the UTF-8 test rows that existed before commit
18ec53156e deleted tst_Utf8. There's a lot
of overlap with some of the other rows in this test, though.
Pick-to: 6.2 6.3
Change-Id: I77c8221eb2824c369feffffd16f094619b69faef
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The QLocal8Bit implementation assumes that there's at most one
continuation byte -- that is, that all codecs are either Single or
Double Byte Character Sets (SBCS or DBCS). It appears to be the case for
all Windows default codepages, except for CP_UTF8, which is an opt-in
anyway.
Instead of fixing our codec, let's just use the optimized UTF-8
implementation.
[ChangeLog][Windows] Fixed support for using Qt applications with UTF-8
as the system codepage or by enabling that in the application's
manifest.
Discussed-on: https://lists.qt-project.org/pipermail/interest/2022-May/038241.html
Pick-to: 6.2 6.3
Change-Id: I77c8221eb2824c369feffffd16f0912550a98049
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends 2a893db480, which changed the
#ifdef'ery but didn't actually enable the building of the test on
Android.
Task-number: QTBUG-87414
Pick-to: 6.3 6.2
Change-Id: Id944dd3023da40ecbf4b8a324784409a63f94aec
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We don't support it any more. I don't think it has ever properly
compiled Qt 6 (and it's no longer working for me against GCC 12's
libstdc++ headers). If you report a bug against it, Intel support's
first question is if you can try instead the new Clang/LLVM-based oneAPI
C++ compiler.
So we support only that one, which identifies itself as Q_CC_CLANG.
Change-Id: I5ff8e16fcdcb4ffd9ab6fffd16eb57a092c8439e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Edward Welbourne
Marc Mutz
Øystein Heskestad
Ahmad Samir
Thiago Macieira
Mårten Nordheim
Mate Barany
Fabian Kosmale
Ulf Hermann
Yuhang Zhao
Ievgenii Meshcheriakov
Volker Hilsheimer
Sona Kurazyan
Ivan Solovev
Lucie Gérard
Tatiana Borisova
Assam Boudjelthia
Giuseppe D'Angelo
Alexandru Croitor
David Skoland
Lars Knoll