The selection of which set to iterate over and which one to remove
from based on their relative size violates the function's
documentation, which clearly states that items are removed from *this,
and not from `other`, so the result must never contain any elements
from `other`.
Amends 4f2c96eaa8. Instead of reverting
to the gruesome old code with the forced detach-just-to-remove copies,
distinguish four cases:
- if the two sets are shallow copies of each other, then their
intersection is *this
- otherwise, if either set is empty, clear() *this. This is required
for one of the tests that 29017f1395
added to succeed.
- otherwise, if *this is detached, perform the operation in-place,
using removeIf()
- otherwise, create a new set and move-assign to *this to avoid
detaching just to remove something again. In this case, we can
continue to iterate over the smaller set, but we need to keep
picking elements from LHS into the result.
[ChangeLog][QtCore][QSet] Fixed a regression (introduced for Qt 5.2)
in intersect() that caused equivalent elements of `*this` to be
overwritten by elements of `other` if `other.size()` was larger than
`this->size()`.
Not picking to 5.15, as users will have likely adjusted their code to
the buggy behavior, and because removeIf() isn't available there.
Pick-to: 6.5
Fixes: QTBUG-132536
Task-number: QTBUG-106179
Change-Id: Idfa17c3b3589c4eacec27259fc01df6aeaa6c45f
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from commit 162015e9c6f469951d9212ef655cff16dcace071)
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
(cherry picked from commit eb13efc4a606cdb0c6f785a6319c489ad53626f3)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
This reverts commit 92acc94fa9.
The change broke QSet ordering guarantees: The documentation clearly
states that each item from `other` that isn't already in `*this` is
inserted ("STL insertion behavior"). Swapping *this and other breaks
this.
Independent of STL vs. Qt insertion behavior, making the picking of
elements from containers "random" in the sense that the size of the
container is now important, and not merely LHS vs. RHS, is a bad idea.
[ChangeLog][QtCore][QSet] Fixed a regression in unite() that caused
equivalent elements of `*this` to be overwritten by elements of
`other` if `other.size()` was larger than `this->size()`.
Fixes: QTBUG-132500
Change-Id: Ia636b62325139d618b5467a643ff710716324296
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
(cherry picked from commit 2d1b3028673493cb144060cbec49b1b95f4188d2)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 3dff1a3f7b22bc623b3c326630bfd94d2bd35d08)
In Qt versions 5.0..6.7, at least, this used to be the implemented
behavior for unite(). For intersect(), it was implemented up to and
excl. 5.2. Even the documentation states as much:
intersect(): Removes all items from _this set_ that are not
contained in the other set.
unite(): Each item in the other set that isn't already in this set
is inserted into this set.
Add checks that the functions behave as documented (hint: they no
longer do, since 6.8 (unite()) and 5.2 (intersect()), resp.), this
being the only correct way to implement these functions (items in
sets may be equivalent, but not identical; it is important that the
set operations work in a manner consistent with insert(), to meet
user's expectation of how these functions work (unite() just
inserts() the rhs, intersect() removes if !rhs.contains). Note that
QSet, unlike other Qt associative containers, actually has STL-style
insertion behavior (insert() doesn't overwrite).
subtract() is the only one that's still true to its docs. A test for
this function will be added in a follow-up commit - eventually.
In anticipation of adding rvalue-other overloads of at least
unite(), add a test with that, too.
Pick-to: 6.5 6.2 5.15
Task-number: QTBUG-132500
Task-number: QTBUG-132536
Change-Id: Id309ab5192e6d1c9bbeef496cbd7116d306eaae8
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
(cherry picked from commit 0d4fd5c545b47966c56ed0b9eb9b5c0a8f75c02a)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 12f39bb2ab0e2bbf70c538af7b36014024b5901a)
QTest::createTouchDevice() passes ownership of the device to the caller,
so make sure to delete it.
Change-Id: I100d3de9eab8ec9f88ed3e0850ada9d988bd962e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 28d0e658e297b5de52fb0cccaede08179c7f4b8c)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 8ef6d4ede857691798465eafcb7571f6c42c0ba9)
When two actions in one menu have the same hotkey and the first action
is not enabled, the action search was selecting the first, disabled
action despite the fact that it could not be selected later on.
Fixes: QTBUG-56952
Change-Id: I894ee09d9ccc7154ca506ef907924cd150ac6ed2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 13636f848da6932f9864bf9335d19b439b8387cd)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 7a9f724735670d7880a1221fdde6d992e3554dd6)
It can't, pfew. Was wondering for a moment, but of course, even the
QSet::iterator is really a const_iterator.
Pick-to: 6.5 6.2
Change-Id: I85caa64c1caca6d77569aa2ceb868a4aa0e5578d
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Magdalena Stojek <magdalena.stojek@qt.io>
Reviewed-by: Lena Biliaieva <lena.biliaieva@qt.io>
(cherry picked from commit a4fd95c51a4347482d6d0a815657d0b5bdaf06db)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 9120bb9e0393bd10e73510d0103bc330f5b92696)
Sometimes test causes kernel crash. Test is skipped until
gnome-shell 46.1 or newer is backported to Ubuntu 24.04 LTS.
See also https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/2095396
Task-number: QTBUG-132070
Change-Id: Ia1c7f1737e225189b86cb2b2d2ff68a7cc1e838c
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
(cherry picked from commit 1c0406ee17d5747f8e5b107db81949055aaa7f9e)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit dd927a4f3c73ea98975457f547bf23830e1f100a)
The pmr::monotonic_buffer_resource ("pmr::mbr") strategy can only
allocate buffers; deallocation is a no-op. I chose it for
QDuplicateTracker because the tool was only used one-off: build it,
then destroy it. There were no other operations.
That changed when 090c7e3262 added
clear().
Calling pmr::unordered_set::clear() will deallocate the nodes (but not
the bucket array), but due to pmr::mbr, nothing is actually
deallocated, so memory that was freed by the container isn't actually
reused by it, later. IOW: repeated grow-clear-grow-clear cycles would
forever grow the monotonic_muffer_resource, using more and more memory
and thus appear to be leaking it.
This isn't exactly optimal behavior, so try to shed the pmr::mbr's
extra memory with a call to mbr::release().
Unfortunately, C++17 originally failed to nail down the semantics of
pmr::mbr::release(), prompting LWG 3120 in response to observed
implementation divergence. In particular, MSSTL, at the time of LWG
3120 filing, didn't appear to allow to allocate() after release(). In
our tests, it does allow it, it just never falls back to the original
(stack) buffer, and, looking at the implementation, it doesn't look
like it can do so anytime soon (it doesn't remember the buffer, and
everything is inline, so they would seem to need a BC break to fix it.
We tried to work-around the problem by hard-resetting 'res' by going
through a destroy-recreate cycle. pmr::mbr is neither copy- nor
move-constructible, so that blunt instrument is, unfortunately,
necessary (std::optional would be an alternative, but has overhead
that affects all platforms). This crashed, though, so just call
release() and handle MSSTL's failure to reuse the initial buffer as a
QoI issue.
For all platforms, before release(), we also need to make sure that
`set` no longer holds any references into it, and, since clear()
doesn't shed capacity, we need to use the C++11 version of the
swap-trick (swap is actually UB here, because the allocators differ):
move-assign a default-constructed set.
Amends 090c7e3262.
Fixes: QTBUG-132945
Pick-to: 6.5 6.2
Change-Id: I4796806e427602255439dcb1518aa9b661c7933e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 9f4325e67354ce6c4c98e7a206f17729b378dc04)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit d2c4f6df21629495ce6fe32653037b35a989d6f4)
QSet::remove() calls QHash::remove(), which unconditionally detaches,
so fixing the detach there, by pulling the isUnused() check to before
detach(), fixes it for both.
For removeIf(), the old code used begin()/end() for iteration,
detaching unconditionally, even if nothing was removed in the end.
In this case, fix by using cbegin()/cend(). That delays the detach()
until the first erase(), where it belongs. The end() iterator of QHash
(and therefore QSet) are stateless sentinels in all but name, so we can
continue to cache end(). Add a code comment to that effect.
Amends 62dad9be9e (for removeIf()) and
5b7c3e31b5 (for remove()).
[ChangeLog][QtCore][QSet] remove() and removeIf() no longer
unconditionally detach, but only if something is actually being
removed.
[ChangeLog][QtCore][QHash] remove() no longer unconditionally
detaches, but only if something is actually being removed.
Pick-to: 6.5
Task-number: QTBUG-106179
Fixes: QTBUG-132831
Change-Id: I807577eafa1be478b0a2da45cf8c44936d5e48ed
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from commit 3a284dc19d1c77692f2faddedc674cc293d51a00)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 605a20b2624dac1bfc4a4cb683700db5026bdbe8)
QTextStream's operator<<(number) uses qAbs to extract the "absolute
value" of number, and passes that and the number's sign to an internal
formatting function. However qAbs is unsuitable for the task, because it
will fail if `number` is minimal, as it returns the same type of
its input.
Since we can afford to change the type of the result, call the private
qUnsignedAbs() function instead.
Change-Id: Ib813a199503f2d07c78bb76862ab2e15d68d0ec2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 8f762b546fe6b2254029c4804a32d9ae6bbf4495)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit b50f026c5586bb31d0611ca570a40e77d5e4eb43)
Checking qAbs preconditions reveals that several places into Qt are
calling it with minimal values, causing UB. Those places do not actually
need that the absolute value is of the same type as the parameter.
Therefore, introduce qUnsignedAbs, which is like qAbs() but whose return
type is always unsigned, and therefore can accept everything.
This function is private; I don't want to encourage users to rely on our
extension.
Aggressively cherry picking because this will be needed in subsequent
bugfixes.
Change-Id: I2047768a5fd35f12bf898ca8c2008813434edd8d
Pick-to: 6.5 6.2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 83c812e1322a2b004bc604be3e6f61fb83246eb0)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit ad867197cf02043f9ec67363b020ac08405b0ab1)
QRect::width() and height() may overflow: they're only safe to call
when right-left+1 (or bottom-top+1) is representable by an `int`.
Therefore, avoiding calling them from QDebug, which is supposed to
"always work" (otherwise, it's not of great debugging help...).
QRectF does not have this issue as it stores the width directly.
Change-Id: I438dbacae42c17730afb92f05d16e3eebb161255
Pick-to: 6.5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 0f336500a0add3e3a8bb31c5cc605e5e13e23833)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 8232c837b02885b6e143e6982bda3ef19e4017fa)
We were including, for each entry we got from CLDR or the system,
minimal and maximal additions from CLDR's likely-subtag rules, plus
versions with script omitted and possibly also territory added, when
likely-equivalent to the original. Include also the converse, with
territory omitted and possibly also script added when
likely-equivalent, so as to control order when these entries also show
up by truncation of others.
The pick to 6.8 was bound to get conflicts and is really a back-port
of reasonably future-compatible behavior to the 6.8 code-base. Results
from uiLanguages() itself are not the same as in 6.9 - truncations are
not included, because QTranslator takes care of those. It includes,
from commit cbf49f735e3cca85922a85d6548666816686db78 and earlier work
on 6.9, various test-cases adapted to this altered aim. It also fixes
some minor details that I'll now forward-port to dev and pick back to
6.9, that I worked out how to do while wrestling to make those
test-cases produce sensible results.
Task-number: QTBUG-131894
Change-Id: I363bfe31867be43807fe3b4942dafa186b8d2e94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 7f9ee43de783105d8de0a0b614751eec639131f8)
(cherry picked from commit 45c9a35d359381419f529ba36a5381b1302bf0f4)
Test was failing on Android because of three issues:
1. Mouse selection does not work well with Android, especially when
predictive text is enabled. After changes in
de5ae6917c commit, mouse selection on
Android needs ImhNoPredictiveText to be set for correct handling.
2. Test sends mouse press events on center position of the QLineEdit.
On some devices, the text would sometimes end before this center
position. To avoid this situation the width is set directly.
3. Android expects the mouse click to be released before the next
click. If it doesn't, the next selection won't work properly
This commit fixes all those issues and unblacklists
testQuickSelectionWithMouse test
Fixes: QTBUG-87417
Fixes: QTQAINFRA-6896
Change-Id: Id19850446954196a077047e250ea24a91ae7255e
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
(cherry picked from commit 1b02900ffe02980cb3e69c60ca415fd694cd773a)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit b579f48790c3a77e26618c511ab305fda3599531)
XML requires escaping for certain characters, and we need to consider
this when writing out qrc files (which use XML).
This commit introduces a helper function,
_qt_internal_escape_xml_characters, to take care of the escaping.
It uses regular expressions to process the input strings. We take care
to start with '&', as '&' needs to be escaped, too.
We minimize the amount of escaping we're doing (the exact rules
differing between attributes and text), to avoid unnecessary work that
needs to be done when configuring a project. This is achieved by a
SUBSET option which can be passed to _qt_internal_escape_xml_characters.
Task-number: QTBUG-131916
Change-Id: Ic1bd0eedee0343c3d70b6954842e21b3c550b092
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
(cherry picked from commit e4fbbdea05540723d4c4429d673d25efa3201d7a)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 6e35353c83925d7c0d5f90db320ef9621f1ffb94)
Otherwise when no other context is made current until thread exit, the
QGuiGLThreadContext destructor will try to call doneCurrent() on an
already deleted context.
Change-Id: If55dd69a72b8ab4012780a449f6a02729dd0ed43
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
(cherry picked from commit cd1686e55f706048286cbc962bbe02032c2396cd)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 10c195b86432eaa430c6991c0fcb74c411407cdf)
The code relies on -Wswitch, but lacked the Q_UNREACHABLE_RETURN() at
the end that compiler and code readers need to understand that we don't
accept values other than those enumerated, even though an enum variable
could hold other values, too.
Since the function is constexpr, can't use that macro directly, but
need to copy the usual GCC 8 magic incantation.
Amends 171ff57be1b8fd1c1b33cffbffa389790f239b5c.
Change-Id: I6c9dd0e4178211f57da61aa6df70f8036370f158
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 420ca3463ee8adf2d986af5802d8da4bb24ce14d)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 760688cc754f7f84c10596345e488055ed511cfc)
To be used in network-related tests where we potentially are
using private/public keys and (on macOS) end-up with keychain
access blocking a test with dialogs requesting a permission
to access the keychain.
Task-number: QTBUG-132645
Change-Id: Ide74633bf88b0453d5d8f8de56282c8cf8207380
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 13109ba350686cd8ce8e298db5d76d0e7c209bd1)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 2d819c70272607e465a2478ab68592ea77c320f3)
This avoids the need to run qt-cmake-standalone-test and then import
the test, as described in QTCREATORBUG-25389.
Change-Id: I010d6613debb2e34ef3809d2da78ca33ade4d602
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 742a0ed72f5264b0198d87df6c4e0657eaf48172)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 133838a7c72bb026a6b34c6d35390111cc5fbdcf)
This fixes an issue where comparing pointers to object is only defined
if both pointers point into the same array.
Task-number: QTBUG-132507
Change-Id: Ib7ccb30001add38ad25b62c848a01cd53566d8bf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 5dcdeeebbc08be8845cdb5a0e586b7a864b7f16f)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 99d401220c3b200e76f00cb7457a5a3935379572)
When even some values I haven't seen may need to be left for later,
but values I have seen are definitely to be discarded, I need to know
if I've already processed them before doing the fiddly check for
whether to defer; but if I decide to defer, I haven't yet processed
and need the later check, to which I've deferred, to see the value as
still new, even though I did once ask about it before. So I need a way
to query without adding to the set.
Pick-to: 6.5
Change-Id: I712f1c400147210c149aeec6de1d15d2e095d6a9
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
(cherry picked from commit 09b77a8d07276e0b5e5fec596f957f8fc4a78869)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 007c0a1854e0bcf6bbe6965fbc24ff1ae6a43cc5)
This commit adds one unusual creation and three more unusual exits:
* creation of the Q*Application in a thread (QTBUG-130895)
* exits using ::exit() instead of returning from main():
* from the main thread's event loop
* from an auxiliary thread
* from inside an auxiliary thread's event loop
All of these exercise the moment the QAdoptedThread & QThreadData for
the main thread is destroyed, which are, respectively:
* thread exit time, running thread-specific destructors
* inside exit(), running atexit()-like callbacks (qthread_*.cpp)
* [tst_static_q*application] inside exit(), running static destructors
(added in commit 1da7558bfd7626bcc40a214a90ae5027f32f6c7f)
Unlike the tst_static_q*application tests, the calls to ::exit() cannot
be a regular QtTest because that would cause the log output to be
incomplete. The threaded Q*Application could be a test of its own, but
since I needed to add the helper anyway, I chose to add the test there.
For the majority of the tests, the failure mode is going to be a crash
on exit.
Task-number: QTBUG-12673
Task-number: QTBUG-132429
Change-Id: I1062ef500356bd97dd0cfffda4aeeda9afa138e8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
(cherry picked from commit bfbd1a281dd00c47df315c06e895bf5d53cd8764)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit ea6d467c050c9e4ab58f970f6720b428ec43c8e2)
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The code was duplicated in multiple places.
Pick-to: 6.5
Change-Id: If2ab30b7afbf6d2f99c9fffd999218802b734d5e
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
(cherry picked from commit b119fee87d5579dc1c4bfc2f508b0e3a75d69fa3)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit f9bdb80ef1f0d56d9585df61f0e209fe0b718443)
And remove NOLINT(clang-diagnostic-self-move), silencing the warning for
Clang seems to work for clang-tidy too (tested locally).
Amends 03bd9491491881529ad28cd6d672edfdda9a0065.
Change-Id: Ibdf982a728f2c6150f2911173dc3c9246f3662b8
Reviewed-by: Jøger Hansegård <joger.hansegard@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 6f0f39673f5ae9debd9ab59be60c32f00f40c41a)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 55f8c072a301c55eda37c2b39dbcb0d579b3f414)
As we produce crash reporting via Swift on macOS 15 now.
Change-Id: Iab4777b29bcaa66eff9d2f1de63072f5744d56df
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit dbfc3c9c381aa1cc0ab3cf5b758b38fb4499cb39)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit ee97f24ef47594c97aaabe034169df7f78a5c884)
Older devices may have lower screen resolution. In this case, the
hardcoded width may not work as expected. For example, all text may
not fit in QLineEdit.
This was the reason why the tst_qlineedit::textMargin test failed on
some Android devices (especially x86 emulator with Android API 29).
When the left and right margins were set to 20, all tested text did
not fit in QLineEdit. When we clicked at the beginning of QLineEdit,
we clicked on the second character of the text. The cursor was moved
to position 1, which caused the test to fail.
This commit updates textMargin test to make sure that tested text will
fit in to the QLineEdit.
Task-number: QTBUG-87417
Fixes: QTQAINFRA-6897
Change-Id: I35352ac1e6f975e72d5c9638f8520f8ddd1d56ae
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
(cherry picked from commit 0a017308cca154b6f906c6e143fb33fe109316bc)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit fdf4738be3a941a14a955aa6931ddfee2145ae58)
Using the left/right keyboard key will deselect the text but also
move the cursor. In this case, to be consistent with the test, the
cursor must return to the previous position. This allows to
unblacklist tests:
- undo_keypressevents
- leftKeyOnSelectedText
Task-number: QTBUG-87417
Fixes: QTQAINFRA-6890
Fixes: QTQAINFRA-6895
Change-Id: I8a6d7cca332fe365ca820a67c23d9cd3fc36fc43
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
(cherry picked from commit 43f2fdc25cfd356292636ea1f8160cf62bab4018)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 4ae1b626efaac7b4ae7fba62aacd2838b21ca311)
The bug, QTBUG-121418, was actually fixed earlier by commit
84afaafc9c6968dd76fcadc5392065d340543521 (or, for 6.8, commit
8c40e8cf12), but escaped our attention
at the time.
On picking to 6.8, where the issue is fixed in QTranslator rather than
QLocale::uiLanguages(), omit the truncated entries from tests of the
latter. Also add commit 84afaafc9c6968dd76fcadc5392065d340543521's new
tst_QTranslator::loadLocale_data() "System, mixed dialects" test-case,
which commit 8c40e8cf12 skipped, despite
actually making it work.
Fixes: QTBUG-121418
Change-Id: Ie24eb172674189079aede7a39584ea760aac1b0c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 12f8ebf5cbdc9089564a93001926d20908bd1785)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit ee65d651a4cda48a9ed9636aecd45306d0f737d0)
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When calculating the maximum width of a text layout, we
would add the text width of each substring *after* we had
added the negative right bearing of the last character to it.
But the bearing of the last character in a wrapped substring
does not actually add to the maximum width unless it is the
last character of the *whole* string.
Prior to 250117086ff15bba79df8f0e15ee66192edc9ea9 this was
not noticed, because the last glyph in the substring would
typically be a space and the space does not have any
bearings (when doing wrapping on individual characters it
could still happen). After the change, the previous glyph
for which we get the right bearing will be the last
non-whitespace glyph. If this happened to have a negative
right bearing, we would add this to the max width and
end up with a larger max width than we should.
This caused a test failure in tst_qquicktext.
This test prefers the text width without the bearing (i.e.
the *advance* of the substring) unless the line is manually
wrapped or it is the last line of the layout.
Change-Id: Iba1a5ad48d575683672400f0572dfa683a0f2d9c
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
(cherry picked from commit c08a92307d6d9fa9d9d9a1f301e3f2a65374e99a)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 610ee0c5040cac4989a1f624e7678f83668e99a0)
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
We need to, following the RFC, send a Dynamic Table Size Update using
HPack once we have acknowledged the setting as long as the new size is
smaller, or if we decide to use the new, larger size.
It's further complicated by the fact that we need to send this update on
the next 'field block' (anything with headers in it), and we may have
multiple SETTING frames come in, and we need to then acknowledge the
_smallest_ one as well as the _final_ one. This is so the decoder on the
peer's side can know that we have set the smallest size, and trimmed our
tables thusly, before going to the larger size.
This could, for example, be used to clear the table.
Task-number: QTBUG-132277
Change-Id: I2b886e125f2c197bc3d42aa0b2bbd308ed2a687c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 57f44d6d882e09f1560f86816fac6ca8d06264fc)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 55dc2af21db3059600465b194daf08cacd925e05)
When calling insertRows(), the model of the child items was not
correctly updated. insertRow() is behaving correctly.
Fixes: QTBUG-131372
Change-Id: I8b6aef7ab97887c6eb46eb21b992d76e4d59b3a0
Reviewed-by: David Faure <david.faure@kdab.com>
(cherry picked from commit 5bab8448feb2661f871e71d71a95afaffcb1656a)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 3536eb32bf7e6b177fe600256dc9efd0ff653e36)
In windows Backtab key event always comes as "Shift+Backtab".
So in order for Backtab key to be recognized as a shortcut sequence,
we also consider Backtab without shift modifier a possibility.
Fixes: QTBUG-94890
Change-Id: I20a7b404b57d8df5bea23765257a178f2e098ed0
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
(cherry picked from commit 4d9f99c4ea70cdae58c80e1bfdbabefe3abb455f)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 6d8afaac84f995cfb008bd2d3eb59fe4fe10dd69)
New languages added with v46
- Kara-Kalpak
- Swampy Cree
Several new Chinese-language locales have been added, including one
using Latin script, which invalidated some prior QLocale tests, which
have been adjusted to fit.
Some obsolete time-zone identifiers are now treated as deprecated
aliases. These have lost their AnyTerritory association, implying
changes to QTimeZone tests.
Many redundant likely sub-tag rules for unspecified language have been
dropped, in favor of simpler rules.
[ChangeLog][Third-Party Code] Updated CLDR data, used by QLocale, to
v46.
Task-number: QTBUG-130877
Change-Id: I92cf210422c7759dd829a7ca2f845d20e263d25b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
(cherry picked from commit e316276b76b9c3768ca4e19a04d03308ef21fe12)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 9413c19cc1f394bc39a9f46d7d12a71fb42c8d1a)
This removes boilerplate and the extra complication of std::addressof.
Task-number: QTBUG-132507
Change-Id: I07091ec0ac526975cf55361a9811fad77eb152c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 30ae70a110ee2460744e4fb78bae29b75effbf72)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 11abd8704650cf09d8259adc58fa7f7a2ccaa2ed)
Amends 65093a84c2b94b1543fd4593bc45d491951d28d4, which changed how we
destroyed the main thread's QThreadData. This merges the call to
destroy_current_thread_data() for both types of Unix systems: those with
broken thread_local destructors and those with working ones. It turns
out that the function got called too early for us in those working
systems (see updated comment).
The clean up of the QThreadData is split into two different mechanisms:
* for any auxiliary thread, when it exits, PThread will call back to
destroy_current_thread_data()
* for the thread that called ::exit(), PThread won't, but ::exit() will
invoke set_thread_data()::TlsKey's destructor
This is different from the situation that existed prior to commit
65093a84c2b94b1543fd4593bc45d491951d28d4: first, there's no code in
qcoreapplication.cpp for this (all in qthread_unix.cpp). Second one may
call ::exit() from any thread, whether that is the thread that called
main(), the thread Qt thinks is theMainThread, or any other.
This commit moves the tst_QCoreApplication check for no extant objects
to a new test. I've chosen to add a new test instead of running a helper
binary via QProcess because we do have a couple of !QT_CONFIG(process)
platforms in the CI, and this is too important.
Credit to OSS-Fuzz for finding this, though it is not itself a fuzzying
problem (all tests of a given structure were crashing on exit).
Fixes: QTBUG-132381
Task-number: QTBUG-130895
Task-number: QTBUG-129927
Task-number: QTBUG-129846
Task-number: QTBUG-130341
Task-number: QTBUG-117996
Change-Id: Ie294dce7263b4189f89ffffd9155ec71d31b89d9
Reviewed-by: Robert Löhning <robert.loehning@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
(cherry picked from commit 1da7558bfd7626bcc40a214a90ae5027f32f6c7f)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 6dc19b55fc6d6dd3198b744f713101cf3b77c0c8)
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This somewhat duplicates some other tests, namely the QHttp2Connection
one, but tst_http2 is our only coverage of the HTTP/2 code prior to 6.8.
This change adds a test where the server sets the
SETTINGS_HEADER_TABLE_SIZE to 0, effectively disabling the dynamic
table. We, in an earlier patch, makes the HPack table error out if
a new header entry is about to be added if the table has not been
resized below a changed 'max'. So, we take advantage of that here and
set the new 'max' capacity without resizing the table, or updating
dynamic capacity causing it to fail if the client doesn't send the
expected Dynamic Table Size Update.
Task-number: QTBUG-132277
Pick-to: 6.5
Change-Id: I1ca8ca7828d5b83606e7adbcfc13c154fa1e3cab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit f7c3acd27ff48b24f99086be206acbe7e00e3208)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 9a1edf52d4b5af35d29b4b2563d1cebafe889385)
Reviewed-by: Mate Barany <mate.barany@qt.io>
Expose some new API to make it easier to test too.
Will be used in follow-up patches for a http2 bugfix.
The setMaxDynamicTableSize() method no longer sets capacity or evicts
entries. This can then be used to set the new maximum size which we will
accept later when we receive a Dynamic Table Size Update.
This flow makes sense with both encoder and decoder. The decoder would
usually be set by us when we send our SETTINGS frame, and then the
Dynamic Table Size Update would be sent by the peer.
For the encoder we would set the maximum size when we receive the
SETTINGS frame, and then we must defer the actual resizing until we
can send the Dynamic Table Size Update ourselves, usually along with the
next HEADERS frame.
Pick-to: 6.5
Task-number: QTBUG-132277
Change-Id: I959f5006eb09427d130735efe136da8c04453fa2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit be477819ac17850632bca6ce59ee2c8ef11191cd)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 2101e9146522efa3810b10312207f7700fdc4bc7)
Reviewed-by: Mate Barany <mate.barany@qt.io>
Android 15 (at least) seems to have changed how float arguments are
passed to native functions, breaking our (conceptually correct) code for
processing the va_arg list into a list of static argument types of the
function implementation.
To fix this, we have to move away from using a va_arg function, and
register a function with statically typed arguments instead.
Use a template function that we instantiate with variadic arguments
deduced from the actual function, using a factory-helper that generates
a JNINativeMethod struct with that template instantiation as the
function pointer. Move all of that into a struct where we can also
declare the signature string as compile-time constant without cluttering
the namespace with static objects.
We can now remove the helpers that took care of type promotion in va_arg
functions, and of the tuple-construction from a va_list.
As a drive-by, don't cast function pointers to void *; it's strictly
speaking undefined behavior in C and should have generated a compiler
warning, if not a hard error [1]. We must initialize the
JNINativeMethod::fnPtr member with the address of the function pointer
instead.
[1] https://port70.net/~nsz/c/c11/n1570.html#6.3.2.3p8
Also, declare the native method as the JNICALL calling convention. That
is only defined on Windows, so makes no difference in practice, but it's
the correct thing to do anyway.
Fixes: QTBUG-132410
Change-Id: I190b95fcbcd07cf99c6765fa426c3c351f91994a
Reviewed-by: Volker Krause <vkrause@kde.org>
(cherry picked from commit e91a17873ee4ae58d369b8eb70029cf895b31d03)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 103aa5afb2d95f883daea41715c97455550285b2)
Demonstrates the problem described in the bug report on Android
15/x86_64. QEXPECT_FAIL the relevant test cases until the next
commit fixes the problem.
Task-number: QTBUG-132410
Change-Id: I065fd29282ef42ed75a2ed8177ded183c92aa6e3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 749367da8c3309c98b3285836c2bd8abcd7274b1)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit e342a5261332c2ef2c3b0d4d14f22dbdbd4a99c3)
It's kinda is important to verify that commit() worked; all the
follow-up tests assume it, so wrap the calls in QVERIFY().
Amends 7e5e7eeaa1.
Pick-to: 6.5 5.15
Change-Id: I01185d65a5ec06ed122e59c43d9cdcc3a7157259
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 97fe38ff0d1e60f92c0bfa6fb3571a0433e60352)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 3660ff9ff88a69ce9f1366e5870f6aa0323f1fda)
To ensure we don't overwrite it in this quite long function.
Amends 7e5e7eeaa1.
Pick-to: 6.5 5.15
Change-Id: Ie5f81b50d2d66ba9e064810f8cbc1a7af298cc2b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 67a906b5564a1ccf03e547aa78fc6fd910d9cd15)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit b2dad9724d5c92582851e56ba73383644ea8b32b)
The docs said only the first placeholder would be considered; in fact,
it considers only the last.
Fix the docs and add a test (also for QTemporaryDir).
Amends b4bb4449aea7592afdb9b9134bb90c40fe29735a.
While 6.6 and earlier are unaffected by the incorrect documentation,
pick this to all active branches in order to verify the behavior is
the same everywhere.
Pick-to: 6.5 6.2 5.15
Fixes: QTBUG-132597
Change-Id: Ia7a37f714f834191b07420d31ca9024702b537cc
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit e7abbc7bf3ab06359b2847b1e1a46c38d8bc6581)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 58221c19559541d7da24fa68f05310aeee230e26)
Calling reset() with the owned handle should maintain ownership and not
leak resources. Move assignment should also handle self-assignment
without leaks. The new tests verifies that this holds true.
Task-number: QTBUG-132507
Change-Id: Icdfa4d67b06b71a74e810593e57449b51982c98c
Reviewed-by: Tim Blechmann <tim.blechmann@qt.io>
(cherry picked from commit 03bd9491491881529ad28cd6d672edfdda9a0065)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 33f37ff6376835dc8add4e5d8273f3dc5e7b086d)
Commit 6ebe3d0f08 introduced extra
SFINAE checks on the template conditions.
However, it broke the case of using callables with deduced return
type, because SFINAE does not work for such conditions and treated
as a hard error instead.
Fix by explicitly providing all template parameters, so that compiler
could figure a better overload on its own.
Only QtConcurrent::blockingMapped() seems to be affected, but add
unit-tests to check all other methods as well.
Fixes: QTBUG-130766
Pick-to: 6.5
Change-Id: I1ddbe712d8ce04ac96ba13841cb569d728cfb943
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
(cherry picked from commit f73765682e7c8f1e0e78b7464deec57c7f2669ba)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 7b356f0f31e3bbfaeed25dd338c9c9c6d3c3f2c4)
Marc Mutz
Giuseppe D'Angelo
Christian Ehrlicher
Liang Qi
Edward Welbourne
Bartlomiej Moskal
Fabian Kosmale
David Redondo
Timur Pocheptsov
Jani Heikkinen
Mitch Curtis
Jøger Hansegård
Thiago Macieira
David Faure
Ahmad Samir
Tor Arne Vestbø
Eskil Abrahamsen Blomfeldt
Mårten Nordheim
Morteza Jamshidi
Mate Barany
Volker Hilsheimer
Volker Krause
Ivan Solovev