Change the name/key of the style to 'macos'. Besides the
name 'macintosh' being archaic, we also need this
change to avoid creating 'macintosh' style folders
in QtQuickControls, now that we plan to use QPlatformTheme
also there to resolve the style.
[ChangeLog][Widgets][QStyle] The 'macintosh' style
has been renamed to 'macos'.
Change-Id: I14b8a8b4dbd369e7a7d16b94e4ad27e501e7e8d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Having three methods with the same name doing different things is
unnecessarily confusing, so follow the standard naming convention in
Qt and call the getter of the resolve mask resolveMask, and the setter
setResolveMask. These methods were all documented as internal.
The publicly documented resolve() method that merges two fonts and
palettes based on the respective masks remains as it is, even though
'merge' would perhaps be a better name.
Change-Id: If90b1ad800834baccd1dbc38fc6b861540d6df6e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QtQuickTest synthetized events can have modifiers, but those modifiers
were not accessible globally, from QGuiApplication::keyboardModifiers
for instance.
eg. calling QML's TestCase::mouseClick with modifiers triggering a call
to QGuiApplication::keyboardModifiers did not give the expected result.
QtTest synthesised events can also have modifiers and those were
correctly handled by QApplication to set modifiers globally.
This fix moves the handling code from QApplication::notify to
QGuiApplicationPrivate::maybeSimulateModifiers and calls this function
from QGuiApplication::notify too.
The definite fix would be to do as suggested in the comment attached to
the moved code:
> Qt Test should not call qapp->notify(), but rather route the events
> through the proper QPA interface. This is required to properly
> generate all other events such as enter/leave etc.
Pick-to: 5.15 5.12
Change-Id: I734e5bbc82232b13828b1a1f82e06ee8eb695417
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QDesktopWidget is not a public class anymore and only exists for
compatibility reasons. So we might just as well move the only method
used by other classes out of QDesktopWidgetPrivate, and get rid of the
friend declarations and the access-to-private code in QApplication.
Change-Id: I74ff14233e59912e0930f98995f8af60dbadfdb6
Task-number: QTBUG-62094
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Before 0a93db4d82 we would polish the
application palette even when it was the default palette, as we
always recreated the system palette each time a style was set.
After the change we skipped polishing the palette unless it was set
by the user, under the assumption that the style would set its
own default palette if it wanted to override the system palette.
This turned out to break the style's ability to slightly tweak the
palette via polish (versus the more full on standardPalette approach).
We now polish both the default palette and user palettes, and we do
so as part of the normal palette update logic. This ensures that
the style also gets a chance to polish the palette when the platform
theme changes.
The polish will not have an effect on the resolve mask of the palette,
as the polish is conceptually the same as a base palette, and should
not affect e.g. Qt::AA_SetPalette.
Fixes: QTBUG-85469
Fixes: QTBUG-85188
Pick-to: 5.15
Change-Id: I869e9c442b177de4f1dc49eb75220709306f4d12
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As they are protected, they need to be excluded from the Python
bindings, which is best done by a pattern.
Task-number: PYSIDE-1339
Task-number: PYSIDE-904
Change-Id: I667aa3b8e229e11b3b46635adfddbd62ce4747c1
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Change the functions to operate in float and add the
QPoint versions as overload calling them. This is
more in-line with the event accessors using float
and allows for removing some workarounds using a delta when
converting touch points.
Leave QPlatformWindow::map(To/From)Global() as is
for now and add helpers for float.
Change-Id: I2d46b8dbda8adff26539e358074b55073dc80b6f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Some goals that have hopefully been achieved are:
- make QPointerEvent and QEventPoint resemble their Qt Quick
counterparts to such an extent that we can remove those wrappers
and go back to delivering the original events in Qt Quick
- make QEventPoint much smaller than QTouchEvent::TouchPoint, with no pimpl
- remove most public setters
- reduce the usage of complex constructors that take many arguments
- don't repeat ourselves: move accessors and storage upwards
rather than having redundant ones in subclasses
- standardize the set of accessors in QPointerEvent
- maintain source compatibility as much as possible: do not require
modifying event-handling code in any QWidget subclass
To avoid public setters we now introduce a few QMutable* subclasses.
This is a bit like the Builder pattern except that it doesn't involve
constructing a separate disposable object: the main event type can be
cast to the mutable type at any time to enable modifications, iff the
code is linked with gui-private. Therefore event classes can have
less-"complete" constructors, because internal Qt code can use setters
the same way it could use the ones in QTouchEvent before; and the event
classes don't need many friends. Even some read-accessors can be kept
private unless we are sure we want to expose them.
Task-number: QTBUG-46266
Fixes: QTBUG-72173
Change-Id: I740e4e40165b7bc41223d38b200bbc2b403e07b6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amend d934fd7f54, which was too naive in
assuming that any change to the popup stack while a popup had been
pressed into should result in mouse move events to be delivered without
buttons.
Instead, add a new flag that is set explicitly when the qt_popup_down
widget is closed, and remove buttons from the move move events only when
that flag is set.
Add the sorely missing test case as well, even if we have to accept that
not all behavior can be tested reliably. Ie. on macOS, the simulated
mouse event differs from the event we do get from the QPA plugin or the
system; on Xcb, some of the behavior depends on the window manager.
This is something we could try to clean up for Qt 6.
Change-Id: Ibf0a0a6fb7d401915057365788947e5a35aa20c3
Fixes: QTBUG-84926
Task-number: QTBUG-82538
Pick-to: 5.15
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Fixes regression introduced in b4981f9d4c,
due to which it was possible to back-tab into a widget even though it or
its focusProxy had a NoFocus policy.
As a drive-by, split the complicated if-statement up a bit for improved
readability.
Change-Id: Ib0ac2604076e812e340b11534c23ae8ae958d082
Fixes: QTBUG-76924
Pick-to: 5.15 5.12
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Remove QDestopWidget public header, simplify the implementation that
maintains a Qt::Desktop type QWidget for each QScreen, and turn
QWidget's initial target screen into a QScreen pointer.
QApplication::desktop() now takes an optional QScreen pointer, and
returns a QWidget pointer, so that applications and widgets can get
access to the root widget for a specific screen without having to
resort to private APIs.
QDesktopWidgetPrivate implementations to look up a screen for an index,
widget, or point are now all inline functions that thinly wrap
QGuiApplication::screens/screenAt calls. We should consider adding those
as convenience APIs to QScreen instead.
Note that QWidget::screen is assumed to return a valid pointer; there is
code that handles the case that it returns nullptr (but also code that
trusts that it never is nullptr), so this needs to be defined, verified
with tests, and asserted. We can then simplify the code further.
Change-Id: Ifc89be65a0dce265b6729feaf54121c35137cb94
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Many of these were generated by clazy using the new qevent-accessors check.
Change-Id: Ie17af17f50fdc9f47d7859d267c14568cc350fd0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The class is documented as obsolete, and the majority of APIs is marked
as deprecated. In this first phase, remove all explicitly deprecated
APIs and trivial implementations.
The test case is complete removed; what's left when code that uses any
of those deprecated methods is removed is not testing anything
meaningful.
For some methods, there is no practical replacement using QScreen yet,
and QDesktopWidget is still used in QWidget internals. Those require
refactoring to only use QScreen before the rest can be removed.
Change-Id: I8f7c968ec566820077221d37b817843758d51d49
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Rather than have a paletteChanged() signal which can be connected to for
tracking when the application palette has changed, then it is better to
use the event that is sent to all windows and the application itself.
That way it is easy for a window/widget or item that cares about the
change to the application font to catch it in the event() function.
[ChangeLog][QtGui][QGuiApplication] Deprecated paletteChanged() signal
in favor of QEvent::ApplicationPaletteChanged.
Change-Id: I95da211e30590e357007cc14d8ee266baceba7b3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Handle wheel grabbing via wheel_widget in a single place, and
propagate events in the same way for all (spontaneous) events.
Handle ScrollMomentum the same way as ScrollUpdate to allow
partial sequences.
Fix the incorrect ignoring of wheel events by default; like all
other input events, they are now again accepted by default and
ignored in the default event handler implementation of QWidget.
This way, implementing the handle suffices to accept the event.
Note that QWidget::wheelEvent doesn't need to be changed, as the
event is ignored there today (an oversight of the change made in
f253f4c3, perhaps).
This also fixes changing of direction of a wheel event while
the event sequence is grabbed by a widget.
Change-Id: Ia0f03c14dede80322d690ca50d085898a0497dbe
Fixes: QTBUG-67032
Task-number: QTBUG-79102
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
For kinetic wheel events, Qt tries to make sure that all events in the
stream go to the widget that accepted the first wheel event.
It did so by directing all events from the stream to the widget from
which the spontaneous event was returned as accepted.
However, that widget might have passed the event on to some other
widgets; e.g QScrollArea forwards wheel events from the viewport to the
relevant scroll bar. The event might then have come back accepted only
because parent propagation kicked in (the scrollbar might not accept
the event, so the parents get a chance, and some parent's scrollbar
ultimately accepts the event).
In this scenario, the wheel widget would be the viewport under the
mouse, when it should have been the scrollbar of the parent. The
next events from the stream were then delivered to a widget that didn't
scroll; and parent propagation is not (and should not be) implemented
for the case where Qt has a wheel widget.
Instead, make the first widget that accepts any initial wheel event
the wheel widget, even if the event was not spontaneous. With this
change, all events from the stream are delivered to the widget that
actually handled the event. That has the effect that ie. a viewport
of a scroll area only gets the first event; all following events are
delivered directly to the scrollbar.
The test case added simulates the different scenarios - nesting of
scroll areas, classic wheel events and a stream of kinetic wheel
events.
[ChangeLog][QtWidgets][QApplication] Wheel events from a device that
creates an event stream are correctly delivered to the widget that
accepts the first wheel event in the stream.
Change-Id: I5ebfc7789b5c32ebc8d881686f450fa05ec92cfe
Fixes: QTBUG-79102
Pick-to: 5.15
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Rather than have a fontChanged() signal which can be connected to for
tracking when the application font has changed, then it is better to
use the event that is sent to all windows and the application itself.
That way it is easy for a window/widget or item that cares about the
change to the application font to catch it in the event() function.
[ChangeLog][QtGui][QGuiApplication] Deprecated fontChanged() signal in
favor of QEvent::ApplicationFontChanged.
Change-Id: Iae8e832238fc85e385a52305bc04f16e597454b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We remove the QT_NO_TOOLTIP check from qstandarditemmodel.h, because as
the 'tooltip' feature is in QtWidgets, we cannot use it properly in
QtGui. Also this affects just two non-virtual inline methods, i.e. it
has no effect on library size.
Task-number: QTBUG-82785
Change-Id: Ic166f14fb1cf3e9dd789573a6b9db6a87fb50e10
Reviewed-by: Tasuku Suzuki <tasuku.suzuki@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Followup to ed3ed0b9db68916fede4 and
3c159957f8.
In QWindowSystemInterfacePrivate::fromNativeTouchPoints() and
QWindowSystemInterfacePrivate::toNativeTouchPoints() we continue using
struct TouchPoint's QRectF area as storage for the screen position +
ellipse diameters; as the comment says, this is _unrotated_, meaning
that rotation is stored separately, and area should not be construed as
the bounding box of the rotated ellipse. (In Qt 6 we can make the
QPA touchpoint look the same as the QTouchEvent::TouchPoint to
eliminate the need to calculate the center of the rect.)
In QGraphicsScenePrivate::updateTouchPointsForItem(), setRect() sets the
position and the ellipse diameters, but the latter is redundant because
the purpose of this function is to localize a touchpoint to the
coordinate system of a particular QGraphicsItem. Ellipse diameters
should stay the same.
In QApplicationPrivate::updateTouchPointsForWidget(), as in
QGraphicsScene, we are localizing touchpoints to a widget
and to the screen that the widget is shown on, so only the position
needs to be set, while preserving the sub-pixel resolution that
mapFromGlobal(QPoint) loses.
Fixes: QTBUG-83403
Change-Id: I61d29e14cbe38567767b164af6ae895082c5e1a1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QApplicationPrivate::keypadNavigationEnabled remains, and is
used in many places in QtWidgets.
Change-Id: Id95239560c279850f340f65414acb92202d10367
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
They were no longer used anyway.
Change-Id: I565480cf39d2d8a27735afe56ac6537bc62fbd4a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
Duplicating the number of classes is a high price to pay to be able to
have some QAction functionality behave differently, or be only available
in widgets applications.
Instead, declare the entire API in QtGui in QAction* classes, and
delegate the implementation of QtWidgets specific functionality to
the private. The creation of the private is then delegated to the
Q(Gui)ApplicationPrivate instance through a virtual factory function.
Change some public APIs that are primarily useful for specialized tools
such as Designer to operate on QObject* rather than QWidget*. APIs that
depend on QtWidgets types have been turned into inline template
functions, so that they are instantiated only at the caller side, where
we can expect the respective types to be fully defined. This way, we
only need to forward declare a few classes in the header, and don't
need to generate any additional code for e.g. language bindings.
Change-Id: Id0b27f9187652ec531a2e8b1b9837e82dc81625c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It's not possible anymore, since many years. The desktop's don't use the
X11 root window anymore :)
Fixes: QTBUG-82880
Change-Id: I923f29f23e61d93640cacb2ac20620c5ddc480b9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
By sending it to all top level windows it will make it possible for
non widget based controls to listen for this event if it cares about it
so it can handle translation updates as appropriate.
Task-number: QTBUG-78141
Task-number: QTBUG-82020
Change-Id: I8f35cdcccd81a199ff780c3f4f3d2c663480d638
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The idea is to reserve device() to return a pointer to a QInputDevice
in the future, which is in sync with QQuickPointerEvent::device()
and with QTouchEvent::device().
Change-Id: Ifda6e8aea72d5121955b31bdcbd91bf1bfa4cec4
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When the tested widget has a focus proxy, then we should check if the
current focus widget is not the same as that focus proxy before setting
it to be the widget that gets focus. This ensures that when back-tabbing
from a widget like QDoubleSpinBox that it will not get stuck inside that
widget and will back-tab to the next correct one.
Fixes: QTBUG-81097
Change-Id: I3f689c7715da7f3ce8c3d2f616041528f5778a2f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When closing a popup (submenu) triggers closing another popup (the menu)
programatically it can happen that QApplicationPrivate::popupWidgets is
destroyed. Therefore we have to check if popupWidgets is still valid
after the focus change event was delivered.
Fixes: QTBUG-81222
Change-Id: Ide3a6897e43f389d396a80d8b158f7c8eb04e3aa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This property is obsolete with today's user interface reality, and was
never consistently implemented in all styles and widgets. Deprecating
it for Qt 5.15 as preparating for removing the code for Qt 6.
[ChangeLog][QtWidgets][QApplication] The globalStrut property has been
deprecated and will be removed from Qt 6
Change-Id: Iaea88e563144481a395de6cf0745a512e386407d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The logic is now mostly handled in QGuiApplication, with QApplication
only dealing with the widget-specific palettes and interaction between
the style and the palette.
The application now picks up changes to the platform theme and will
re-resolve the current application palette appropriately. This also
works even if an explicit application palette has been set, in which
case any missing roles are filled in by the theme.
The palette can now also be reset back to the default application
palette that's fully based on the theme, by passing in the default
constructed palette (or any palette that doesn't have any roles set).
This is also correctly reflected in the Qt::AA_SetPalette attribute.
Conceptually this means QGuiApplication and QApplication follow the
same behavior as QWidget, where the palette falls back to a base or
inherited palette for roles that are not set, in this case the theme.
Behavior-wise this means that the default application palette of the
application does not have any roles set, but clients should not have
relied on this, nor does QWidget rely on that internally.
It also means that setting a palette on the application and then
getting it back again will not produce the same palette as set,
since the palette was resolved against the theme in the meantime.
This is the same behavior as for QWidget, and although it's a
behavior change it's one towards a more sane behavior, so we
accept it.
[ChangeLog] Application palettes are now resolved against the platform's
theme palette, the same way widget palettes are resolved against their
parents, and the application palette. This means the application palette
reflected through QGuiApplication::palette() may not be exactly the same
palette as set via QGuiApplication::setPalette().
Change-Id: I76b99fcd27285e564899548349aa2a5713e5965d
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The argument is only used when the application palette is set,
(as opposed to setting the palette for a specific widget class),
and that code path is only triggered from QApplication::setPalette,
which passes 'true' for this argument.
Change-Id: I67a1cc3741f6f62653b0f95ff88d28228f9977d4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QApplication tries to close all windows on quit using closeAllWindows,
but closeAllWindows skips some windows, in particular any widget with
WA_DontShowOnScreen set.
QApplication then tries to verify that all windows have been closed,
and that logic should skip the same kind of windows as closeAllWindows
does.
We include WA_DontShowOnScreen so that widgets that are proxied via
QGraphicProxyWidget will not prevent the application from quitting.
There's still some divergence between closeAllWindows and the logic
in QApplication::event's quit handling, but aligning that requires
more work than this particular fix, and should probably also be
based on using the return value of tryCloseAllWindows() directly.
Change-Id: I2555eeee0cb04b8e736109fed57f37150efd1964
Fixes: QTBUG-81107
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Richard Moe Gustavsen
Volker Hilsheimer
Karsten Heimrich
Nicolas Guichard
Tor Arne Vestbø
Friedemann Kleint
Shawn Rutledge
Tasuku Suzuki
Andy Shaw
Joerg Bornemann
Qt Forward Merge Bot
Tor Arne Vestbø
Simon Hausmann
Christian Ehrlicher
Liang Qi