Mandated by P0792R9 already, but we never checked and P0792R14 has
user-defaulted assignment operators showing up in the synopsis now,
so make sure we don't accidentally break this going forward.
Amends 29b65c98e7.
Pick-to: 6.7 6.6 6.5
Change-Id: Ief9c5ff30895f8bfccec1c24d1777d3dab76c95a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The tool tip content size uses an incorrect content margin, when it's
constructed. This content margin has been reset to correct value when
tool tip is positioned using placeTip(). But after that, the content
size not been recalculated.
This patch triggers updatesSize() to calculate content size with
updated content margin values.
Fixes: QTBUG-119752
Pick-to: 6.7 6.6 6.5
Change-Id: I454c8528505686f2724b897e4002f78f3049149a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We used to look through the event queue in QCoreApplication::postEvent,
and if we found an existing DeferredDelete event for the receiver we
would compress the two events into one.
This was changed in 99b89d30fa, as the
logic was causing O(n^2) for deleteLater, by using one of the bits
in QObjectData to track whether the object had already been deleted.
But it kept the logic for tracking this in QCoreApplication::postEvent,
and QCoreApplication::compressEvent would still do the work of deleting
the additional QDeferredDeleteEvents.
To avoid the unnecessary heap allocation of the QDeferredDeleteEvents
we can move the debouncing/compression to QObject::deleteLater().
We use the same mutex as in QCoreApplication::postEvent to guard
concurrent access to deleteLaterCalled.
A note has been added about the (preexisting) issue that the mutex
is not sufficient to prevent data races, as the deleteLaterCalled
flag is part of a bit-field, and we're not guarding any of our
other accesses to other bits.
As QDeferredDeleteEvents is private API, we can rely on no-one else
posting it than QObject::deleteLater(), which should be the case now
that tst_QApplication::sendPostedEvents() was fixed.
The documentation has been clarified as well. It's safe to call
deleteLater() more than once, but that's not _because_ other
pending events for the object are cleared. The latter behavior
is normal ~QObject() behavior. The documentation was probably
written at a point we didn't do any event compression at all
for QDeferredDeleteEvents.
Task-number: QTBUG-120124
Task-number: QTBUG-119918
Change-Id: I2a733095b7cb066ba494b1335aa40200c749cb0c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some sub-classes have special handling of source model layout changes
(abbreviated as SMLC from here on out), they relied on disconnecting the
connections to the _q_*layout* slots in the private class using the SLOT
macro. This isn't possible any more after recent changes (and the method
were renamed to remove _q_ prefix).
Sub-classes resorting to using private API is a clear sign some
functionality is missing from the public API, so a cleaner solution for
this issue is adding this setter which enables sub-classes to tell
QIdentityProxyModel to leave handling of the SMLC to them. Thanks to
David Faure for the idea/solution.
[ChangeLog][QtCore][QIdentityProxyModel] Added
setHandleSourceLayoutChanges(bool) method to allow sub-classes to
indicate to QIdentityProxyModel that they will handle source model
layout changes on their own. Also added a getter,
isHandleSourceLayoutChanges().
Change-Id: I1de79dd693ce32a6e2df9a7c81dd4abdc5f00248
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Because we may be able to use the other side's storage and apply the
operation in-place. We reuse the storage of the one that can be
detached: even if we have to grow the buffer, QBitArrays are usually
small so there's a good chance it's just to the extra space QArrayData
usually overallocates or a simple, non-moving realloc().
Disassembly with GCC 13 and Clang 17 show the vectorisers did kick in
for all four functions (inverted_inplace included). I think a
hand-rolled version could squeeze a few more cycles, especially in the
tail section, but I don't consider its maintenance cost to be worth it.
Pick-to: 6.7
Change-Id: I85b3fc2dd45c4693be13fffd1795bfb1b296caa6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
A copy without pixel ratio was made, but color table not set.
Pick-to: 6.7 6.6 6.5 6.2
Fixes: QTBUG-119902
Change-Id: I328f3faa70d7a1263061cbe51921999393e30801
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
If the commit of data to a model index result in that index getting
filtered out, then the editor will be removed as part of committing the
data, and the index that the editor is associated with becomes invalid.
The subsequent call to closeEditor() will find that the index for the
editor is no longer valid.
This should not warn, and it should also not abort the clean-up process
early. Instead, identify that the editor that we want to closed is
already hidden. In that case, skip the warning and most of the cleanup
process, and proceed directly to the EndEditHint handling further down.
Add a test that simulates the two scenarios where this can happen:
either the committing of data results in the index being filtered out
by the existing filter; or the filter changes while editing, and the
index being edited gets removed. In both cases, we don't want to see a
warning, and the state of the item view should be reset correctly.
Pick-to: 6.7 6.6 6.5
Fixes: QTBUG-115765
Change-Id: If247172fdac9a1a9279dae96c078d32553d4ee5d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: 🌴 Alexey Edelev 🌴 <alexey.edelev@qt.io>
When using QKeySequence::DeleteEndOfWord or
QKeySequence::DeleteStartOfWord in a QLineEdit with an existing
selection, the selection was ignored which resulted in unexpected
behavior (see bugreport). This is fixed by only setting the selection
if none exists yet.
To prevent an entry in the history when the input is empty, the
selection is checked before calling del().
Fixes: QTBUG-120006
Pick-to: 6.7 6.6 6.5
Change-Id: I2e803c5eff1f0e289e93a77c58ecd78299241da7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A splash screen is usually shown during initialization, before the main
window is shown. At that point, an application might not spin an event
loop. The documentation therefore recommends to run processEvents()
periodically, in order to ensure that the splash screen is actually
shown. Async window managers (e.g. XCB) might require more than one call
to processEvents() for the splash screen to be shown. It can't be
guaranteed, that a specific number of calls to processEvents() make the
splash screen visible. Calls to processEvents() are not considered
good practice in application code.
QSplashScreen::finish() uses a copy of QTest::qWaitForWindowExposed(),
to automatically close the splash screen, when the main window is
shown.
=> Re-write the static inline waitForWindowExposed to wait for the
widget's windowHandle()->isVisible(). That ensures visibility to the
window system.
The previous version waited for isExposed() to become true. That
ensured exposure to the application, but not visibility.
=> Intercept QEvent::Show and process events, until the splash screen
becomes visible.
=> Remove references to processEvents() as a requirement to show the
splash screen from the documentation. It remains a requirement for
processing mouse and keyboard events.
=> Re-activate tst_QSplashScreen and test visibility in the constructor
test function.
Drive by:
- implement switch in event override
- factor out paint event handling in a function
- update documentation about calling processEvents() to enable mouse
handling.
Fixes: QTBUG-119225
Pick-to: 6.7 6.6 6.5
Change-Id: I07910705246b4e3234e01cc4896f5bc4b2c56772
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The example has a lot of code and documentation, but in essence shows
how to use float-based QPainter APIs and how to set a render hint. That
is two lines of code, which we can show as snippets.
Update the screenshot of the example with a higher-resolution version.
Pick-to: 6.7 6.6
Fixes: QTBUG-119983
Change-Id: Iafcb813dff6ab8c269176f7994c95947ebf5e559
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It was forgotten when we originally fixed the hardcoded 1_1 version.
Pick-to: 6.7 6.6 6.5
Change-Id: Iff3148d79466dac2830fe9a63d954aead96fb0ac
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This patch replaces the QBasicFutureWatcher that was used for
continuations with context objects with a smaller QObject-based wrapper
that works directly from the actual continuation.
The idea stays the same: In order to run continuations in the thread of
a context object, we offload the continuation invocation to the
signal-slot mechanism.
Previously, we've hooked into QFuture with QFutureCallOutInterface to
emit a signal and trigger continuation invocation. However, it is much
easier and robust to emit that signal from the continuation itself.
This sidesteps the locking issues that QFutureCallOutInterface handling
presents. QFutureCallOutInterface basically requires any consumer to
only access the QFuture after all events have been posted and the
internal mutex unlocked, i.e. on the next cycle of the event loop.
Continuations do not impose this restriction; runContinuation()
explicitly unlocks the internal mutex before calling the continuation.
This fixes a deadlock when using QFuture::then(context, ...) where
the paren future is resolved from the same thread that the context
object lives in.
Fixes: QTBUG-119406
Fixes: QTBUG-119103
Fixes: QTBUG-117918
Fixes: QTBUG-119579
Fixes: QTBUG-119810
Pick-to: 6.7 6.6
Change-Id: I112b16024cde6b6ee0e4d8127392864b813df5bc
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
There is no need for {}, and removing them resolves the warning.
Change-Id: Id9812a9ba328f03839dd953662a82b05f99b0b8b
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Amends 32edae5e26, after which we keep a
copy of the restored state if the state couldn't be applied yet. Since
making a copy of the entire state results in multiple copies of layout
item pointers, we might end up with dangling pointers if the layout
structure is modified while we keep the copy. This can happen if methods
such as tabifyDockWidgets or splitDockWidget get called; e.g. tabifying
dock widgets will destroy the layout items that were added for them.
Unfortunately, the layout items do not have a pointer back to the layout
they live in, and the items in the stored state might not yet live in a
layout anyway. So we cannot remove the items from their layout in a
QDockWidgetItem destructor implementation.
Instead, we have to forget the stored state. Add a helper function that
writes the stored state back to the actual state, and deletes the stored
state afterwards. Call this function when the layout might get modified
programmatically.
Add a test case that reproduces the crash without the fix, and passes
with the patch.
Fixes: QTBUG-120025
Pick-to: 6.7 6.6 6.5
Change-Id: I8f7e886f3c4ac38e25f9b8bc194eea0833e5974f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
... instead of just choosing the closest scaling factor.
Otherwise we end up with the 1x pixmap for a 1.25 scaling factor instead
of a the better fitting 2x pixmap.
Task-number: QTBUG-90634
Change-Id: Ic554fc8d2715deea43bc22e71414902a263b2fef
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Now that the assignment-bitwise operators can reuse storage, we can make
these operators also be capable of reusing storage.
Pick-to: 6.7
Change-Id: I85b3fc2dd45c4693be13fffd1795b893de65a5b8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Instead of creating a temporary copy of one of the two sides (which will
share QByteArray), create one with the correct target size such that it
is already detached.
Drive-by move them to hidden friends.
Pick-to: 6.7
Change-Id: I85b3fc2dd45c4693be13fffd1795b74eeaf3be71
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Makes it possible to add new unpremultiplied formats later.
Change-Id: Id998a2674ca9067a0e2a5f85c7baf04bcd9a9912
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
No functional change, yet. Just dissociating the data name from type
name, so we can add tests for FP types in a follow-up step.
Pick-to: 6.7 6.6 6.5
Change-Id: I98fdebb49cca614ab27db146c4bacafd190e7d9b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
std::string is a nice value_type for when you want to track short
strings (because of its SSO). Check that it works, incl. in case
the implementation falls back to QSet in the absence of std::pmr
support in the stdlib.
Pick-to: 6.7 6.6 6.5
Change-Id: I2406258355295c2b1300c4ae8001cead59bb27d6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Should be qint128, not quint128.
[ChangeLog][QtCore][QtEndian] Fixed return type of qbswap(qint128)
(was: quint128).
No tests for this exist, so no wonder it fell through. Added them.
Amends befda1acca.
Pick-to: 6.7 6.6
Change-Id: Ibf87724b1d500081caca46af1c598975964e04c0
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
When the test was written, we didn't have support for either int128
literals or proper QCOMPARE failure printing (QTest::toString()), so
the code awkwardly constructed literals from 64-bit ones using
arithmetic and QCOMPAREed the high and low 64-bit halves separately.
Now that we have added support for both, simplify the test code
accordingly.
Change-Id: Icdee7bb01f6e4bd3de74233b4fb992b0590ddafd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Replace the ad-hoc implementation of QTest::toString() in
tst_qglobal.cpp with a QDebug stream operator, so the
QTest::toString() fall-back to QDebug::toString() kicks in.
Since the ABI issues revolving around the new int128 types are not
known, yet, avoid baking the types into the ABI by a) making the
operators constrained templates¹ and b) passing though void* to the
exported helpers. These functions return an error message if Qt was
compiled without support for int128.
Use the Thiago Trick™ (leaving obviouly dead code around for the
compiler to remove without warning) to expose more code to more
compilers. This appears to work elsewhere in Qt, so I hope it does
here, too.
This completes the minimum qint128 support so we're able to debug code
and write tests that use these types.
¹ Templates, unlike inline member functions of wholly-exported
classes, never² become part of the ABI.
² <insert here the convoluted scenario under which this is false>
Fixes: QTBUG-117011
Change-Id: Ia4e56d26c6ffd18b7d69a7ceaed65b2211d258b2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Found a problem on GCC 9.4 where asan/ubsan seems to break
std::numeric_limits<int128>::min():
runtime error: negation of 0x80000000000000000000000000000000 cannot be represented in type '__int128'; cast to an unsigned type to negate this value to itself
This is the -i _after_ we've already checked for ::min() two lines
above. It works with Q_INT128_MIN, though, so use that.
Pick-to: 6.6
Change-Id: I778980baf4e7eea9f8de06697d792241314acacd
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Do not use rounded value for conversion, which gives inaccurate result.
Example case: typical margin for A4 paper size is 8.4 pt. At 600 dpi,
the old code was using rounded point value of 8, which produces an
incorrect result:
8 / (72.0 / 600) = 67 pixels
The correct margin is of course:
8.4 / (72.0 / 600) = 70 pixels
Pick-to: 6.6
Change-Id: I44b2eeabb82fd3bf8e2dcfcba66ae96cde763875
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This update addresses an issue in converting page size from points to
device pixels. Previously, rounding the result could lead to an
overflow beyond the physical pixel capacity.
Example case: A4 paper size at 600 dpi:
- points to pixels: 842 pt / (72.0 / 600) = 7016.666666666667
However, the physical pixel height for an HP printer:
- GetDeviceCaps(hdc, PHYSICALHEIGHT)) = 7016
This fix prevents pixel size from exceeding the physical print area,
avoiding unprinted pixels.
Pick-to: 6.6
Change-Id: I66eabc628d3374d9cfb19b0eb5928f83afbc13dc
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch corrects the miscalculation in point unit conversion,
ensuring correct margin updates.
Previously, non-pt units were rounded to two decimal places. When
converting back to pt, rounding was to zero decimals, making the result
always less than the original. This could result in margins falling
below the minimum allowed.
Example:
original_points = 8.4
multiplier = 2.83464566929
mm: qRound(8.4 / multiplier * 100) / 100 = 2.96
new_points: qRound(2.96 * multiplier) = 8 // wrong!
The fix rounds back-converted values up to two decimals, ensuring they
are never less than the original and thus stay above minimum margins.
new_points: qCeil(2.96 * multiplier * 100) / 100 = 8.4
Also, remove unused function qt_convertPoint.
Pick-to: 6.6
Change-Id: I6109f8d381aec96db1ce04cc167f7b73c1c0b9a8
Reviewed-by: David Faure <david.faure@kdab.com>
Instead of introducing the nested class InheritsQUntypedPropertyData
as a sentinel class for inheritance check, we can use BinaryTypeTrait
to handle the check. By doing this, we no longer need to maintain the
nested class.
Change-Id: Ie3aae976015d5fae6b6d072cad6ee52cd30b769d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
GCC at some point decided that it wouldn't include the full namespace
expansion in __PRETTY_FUNCTION__ for any type that is in the same
namespace as the template function being expanded (that is, the
QtPrivate) namespace. I don't know how long this behavior has been in
place, but it can be seen with GCC 13, where the expansion of that macro
inside QtPrivate::typenameHelper<QtPrivate::ModelIndex>() is:
constexpr auto QtPrivate::typenameHelper() [with T = ModelIndex]
This can be easily worked around by using a different namespace.
Fixes: QTBUG-119650
Pick-to: 6.6 6.5 6.2
Change-Id: Ica7a43f6147b49c187ccfffd179df309e43a70cb
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
qfloat16 implemented comparison with int, but not with other integral
types. As a result, comparing qfloat16 vs qint64 or short was
ambiguous, because the compiler had (at least) two options:
* qint64 -> int
* qint64 -> float
Fix it by explicitly introducing comparison operators for other integral
types.
Use the new compare helper macros for that, and implement helper methods
as templates restricted on integral types.
Note that we have to manually extend the std::is_integral type trait
because libstdc++ only treats __{u}int128_t types as integral when
compiling in -std=gnu++XX mode, and we compile Qt in -std=c++XX mode.
Fixes: QTBUG-117637
Change-Id: Id0c074af1e9ccc2c2492eb2cc4ee62a4a7131b07
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This replaces all the other helper macros which were used to
generate the relational operators before, and also gains support for
operator<=>() in C++20 mode.
Change-Id: I40cec3cb5a5c42523787414d610e00afe6fc86f8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It is somewhat common HTTP method with RESTful use cases
(partial updates on resources)
Task-number: QTBUG-114637
Change-Id: Id252d3f4b54c3ebb8df5c93259e64a4af2d0ca2f
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Added to both QNetworkRequestFactory and QRestAccessManager
Task-number: QTBUG-114717
Change-Id: Ibca55bba548a034a0da7ea60550642c150b63dc2
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Provide users with means to use more modern time/duration type.
Please note that since QTimer does not currently support
timeouts larger than 'int' milliseconds, the limit on how long
durations can be expressed, remains. This should not
be an issue in practice with network requests, as a typical
int32 system can express timeouts of ~24 days.
[ChangeLog][QtNetwork][QNetworkAccessManager] Add std::chrono
support for transfer timeout.
[ChangeLog][QtNetwork][QNetworkRequest] Add std::chrono support
for transfer timeout.
Fixes: QTBUG-118714
Change-Id: If85678a5994c59bac5926e47f98c9cfeb2a07c30
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
These include:
- readyRead(), signal for indicating new data availability
- bytesAvailable(), function for checking available data amount
- downloadProgress(), signal for monitoring download progress
Task-number: QTBUG-114717
Change-Id: Id6c49530d7857f5c76bd111eba84525137294ea7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The class provides a way to represent server-side service endpoints.
With RESTful applications these endpoints typically have a need for
repeating requests fields such as headers, query parameters,
bearer token, base URL, SSL configuration. This class allows setting
of the repeating parts, while allowing the setting of changing parts
on a per-request basis.
[ChangeLog][QtNetwork][QNetworkRequestFactory] Added a new convenience
class to help with the needs of repeating network request details
imposed by the server-side service endpoints, which is common
with RESTful applications.
Task-number: QTBUG-113814
Change-Id: Iabcfaed786949ffbb0ad0c75297d0db6ecc1a3cc
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
New QHttpHeaders class for use in place of
std::pair<QBA,QBA>, QMap<QBA>, and QMultiMap/Hash<QBA,QBA>
to represent HTTP headers.
[ChangeLog][QtNetwork][QHttpHeaders] New QHttpHeaders class
Task-number: QTBUG-107042
Change-Id: I54766886a491acfc9a813a3414322a75011acb9d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It previously had to kludge a 1900-to-1999 date into a 1950-to-2049
range; it can now tell QDTP to do that for it. In particular, this
fixes a problem with 00-02-29, which failed to parse using 1900 as
base year so couldn't be corrected to 2000-02-29, which is now the
date it finds directly.
Task-number: QTBUG-46843
Change-Id: I7ac936bdfb15b78daed5d237c5d921c800af4951
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The twentieth century is now some way behind us, so using its years
when parsing a date-time format that only provides the last two digits
is increasingly likely to produce unwelcome results. Most such formats
are saved by the "redundant" presence of a day-of-week field but, for
those that are not (notably including ASN.1 date fields), there is a
need to provide some way to over-ride the twentieth century default.
Allow the caller to pass a base year to the fromString() methods, of
QDate and QDateTime, and to QLocale's toDate() and toDateTime(), that
indicates the first of 100 consecutive years, among which the two
digits given can select a year. Add some test-cases to exercise the
new API.
[ChangeLog][QtCore][QDate] When fromString() has only a two-digit year
to go on, it is now possible to set the start-year of the century
within which this selects.
[ChangeLog][QtCore][QDateTime] When fromString() has only a two-digit
year to go on, it is now possible to set the start-year of the century
within which this selects.
[ChangeLog][QtCore][QLocale] When toDate() or toDateTime() has only a
two-digit year to go on, it is now possible to set the start-year of
the century within which this selects.
Fixes: QTBUG-46843
Change-Id: Ieb312ee9e0b80557a15edcb0e6d75a57b10d7a62
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This takes a YearMonthDay and a day-of-the-week, returning a QDate
that (if possible, else invalid) has the given day of the week and
differs from the YearMonthDay only in the century. This is useful when
resolving dates with only two-digit year information, which can be
disambiguated by the day of the week. Added tests of the new API.
This adds a new virtual method to QCalendarBackend, for which that
base class does provide a brute force implementation, so derived
classes do not need to add implementations. It is, however, a
binary-incompatible change for any backend plugins that may be in use
to implement custom calendars.
Worked out the details for the Gregorian calendar to make it possible
to compute the right century (and whether any century works) without
trial-and-error searching. Coded that up as its implementation of the
new method.
[ChangeLog][QtCore][QCalendar] Added a matchCenturyToWeekday() method
for use when resolving dates given day, month and last two digits of
the year, along with day of the week. Any custom calendar backend
plugins shall need a recompile and may, optionally, implement the new
virtual method behind this.
Change-Id: I6003c8d9423d6bfb833957bb5120f2d423219c7a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the private header to public.
Make documentation a part of public interface.
[ChangeLog][QtCore][QAtomicScopedValueRollback] New class.
Task-number: QTBUG-115107
Change-Id: I6c9f5448e74a5b62f4d97ee079944f4b1b731121
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
A default-constructed QLocale gets initialized with the
currently-active default locale, and apparently retains that setting
henceforth. That is why the `prior` member is not explicitly
initialized, which is confusing at face value.
Explain the mechanism better, and explicitly default-initialize the
member, so the next reader of the code saves the time to research
this.
Amends 76dfda1ad1.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I1d1171f8564c70a971938b92b809f63ba5637d3a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Marc Mutz
Santhosh Kumar
Tor Arne Vestbø
Ahmad Samir
Volker Hilsheimer
Thiago Macieira
Allan Sandfeld Jensen
Johannes Grunenberg
Axel Spoerl
Mårten Nordheim
Arno Rehn
Amir Masoud Abdol
David Schulz
Jani Heikkinen
Jarkko Koivikko
Po-Hao Su
Ivan Solovev
Juha Vuolle
Edward Welbourne
Rym Bouabid