This strips leading whitespace from asset catalog filenames, which was
causing installation to fail due to incorrectly calculated paths.
Task-number: QTBUG-57090
Change-Id: I80db627262f9d58f4403e2d8ab205bef2113992b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this is a bit easier on the backwards compat code in qt creator, which
needs to merge and then de-duplicate the lists itself.
Change-Id: I79f9319c26af541f5efa85700878e7ddbd00e2b7
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
the code got factored out to an own toolchain.prf file, which is
load()ed from default_pre.prf, so no change at first.
however, on mac, we shadow toolchain.prf, and make it load() sdk.prf
first.
a side effect, it has become harder to disable the use of an sdk
altogether: putting CONFIG-=sdk into a project file or the qmake
command line has no effect now. instead, it's possible to put it into
.qmake.{conf,cache}.
to make it simpler again, it's conceivable to finally add qmake -pre,
which would allow setting variables before default_pre.prf is executed.
take 2: there was nothing wrong with the original patch, but in 5.8,
CONFIG+=simulator_and_device moved from qconfig.pri to various prf files
that would do it according to the simulator_and_device configure
feature, which would be way too late for the "pulled ahead" sdk.prf
loading. as simulator_and_device is now gone entirely, it is safe to
re-apply this patch (mostly) as-is.
Task-number: QTBUG-56144
Change-Id: I6cf484982eaed8af39f7a539c60f5a087a299914
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
A separate flag is no longer needed now that simulator and device builds
are not exclusive any more (*) - both 'simulator' and 'device' being set
at the same time is a sufficient indication (uikit/default_pre.prf sets
this up according to the simulator_and_device feature and the
QMAKE_MAC_SDK variable).
(*) xcodebuild mode actually still uses exclusive builds, but this is
activated locally in uikit/default_post.prf, and uikit/xcodebuild.prf
implements the actual build passes manually anyway, so this change does
not affect it.
Change-Id: Idf173a7bfeb984498d3a49ed6b8d1a16da6c2089
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
There's no reason for this to be separated, regardless of the
support status of i386 macOS builds. Additional architectures may
appear in the future (and currently there's actually 3 - i386,
x86_64, and x86_64h for Haswell CPUs). So this feature could be
used to get combined generic x86_64 and Haswell builds. Some
system libraries appear to have an x86_64h slice in Sierra.
[ChangeLog][Build System] Support for universal binaries on macOS
has been re-introduced.
Change-Id: I1c89904addf024431fdb3ad03ea8ab85da7240ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This essentially emulates Xcode behavior for QMAKE_BUNDLE_DATA.
This is mostly for our own internal use. No documentation is provided.
Variables introduced:
- QMAKE_ASSET_CATALOGS
- QMAKE_ASSET_CATALOGS_APP_ICON
- QMAKE_ASSET_CATALOGS_BUILD_PATH
- QMAKE_ASSET_CATALOGS_INSTALL_PATH
Change-Id: I9577415d637f022d05f301c5a0d799483cd2a963
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the code got factored out to an own toolchain.prf file, which is
load()ed from default_pre.prf, so no change at first.
however, on mac, we shadow toolchain.prf, and make it load() sdk.prf
first.
a side effect of this is that project files may not override
QMAKE_MAC_SDK any more, which seems to be no big loss. it is still
possible to override the sdk on the configure command line (but note
that this only ever worked for the target sdk).
it has also become harder to disable the use of an sdk altogether:
putting CONFIG-=sdk into a project file or the qmake command line has no
effect now. instead, it's possible to put it into .qmake.{conf,cache}.
to make it simpler again, it's conceivable to finally add qmake -pre,
which would allow setting variables before default_pre.prf is executed.
Change-Id: I149e0540c00745fe8119fffd146283bb214f22ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reduces unnecessary OS conditions in qmake since these platforms
are mutually exclusive, and also opens up their potential for use on
macOS to transparently support multi-arch builds like UIKit platforms.
This is also more similar to what Xcode does, as the DEPLOYMENT_TARGET
variables are platform specific, while the ARCHS variable is not.
DEPLOYMENT_TARGET has a use case for being OS specific in qmake (host
tools vs targets), while ARCHS does not.
Change-Id: Icee838a39e84259c2089faff08cc11d5f849758d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch moves towards a more sensible layout for UIKit platforms,
where both the device and simulator architectures for binaries are
combined into a single Mach-O file instead of separating out the
simulator architecutures into separate _simulator.a files.
This approach is both more common in the iOS ecosystem at large and
significantly simplifies the implementation details for Qt, especially
with the upcoming support for shared libraries on UIKit platforms.
This patch takes advantage of the -Xarch compiler option to pass the
appropriate -isysroot, -syslibroot, and -m*-version-min compiler and
linker flags to the clang frontend, operating in exactly the same way
as a normal multi-arch build for device or simulator did previously.
Exclusive builds are still enabled for the xcodebuild wrapper Makefile,
which builds all four configurations of a UIKit Xcode project as before,
as expected.
A particularly advantageous benefit of this change is that it flows very
well with existing Xcode workflows, namely that:
- Slicing out unused architectures is handled completely automatically
for static builds, as an executable linking to a library with more
architectures than it itself is linked as, the unused architectures
will be ignored silently, resulting in the same behavior for users
(and the App Store won't let you submit Intel architectures either).
- Removing architectures from a fat binary using lipo does NOT
invalidate the code signature of that file or its container if it is a
bundle. This allows shared library and framework builds of Qt to work
mostly automatically as well, since an Xcode shell script build phase
can remove unused architectures from the embedded frameworks when that
is implemented, and if Qt ever starts signing its SDK releases, it
won't interfere with that either (though binaries are just resigned).
Change-Id: I6c3578c78f75845a2fcc85f3a5b728ec997dbe90
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The actual blocker for precompiled headers is not the iOS/tvOS/watchOS
platforms, but the way qmake handled multiple-architecture builds on
Apple platforms.
This patch allows multi-arch builds to be performed while using
precompiled headers.
Since df91ef3d6c55692a0236f67b6c6b134a3bf84098 (April 2009), Clang has
had support for PCH files in the driver, which allows to use the
-include flag to automatically translate to -include-pch. We can then
take advantage of the fact that the -include option is allowed to not
be separate from its argument, which lets us take advantage of -Xarch to
specify a per-architecture precompiled header file.
This is done through some magic in the qmake Makefile generator which
"multiplexes" the PCH creation rule across multiple architectures and
replaces a series of tokens with the proper precompiled header paths
and architecture flags at usage point.
Change-Id: I76c8dc9cda7e218869c2919f023d9b04f311c6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Actually enables headerpad_max_install_names in the darwin-g++ mkspec
as previously it was (presumably accidentally) cleared.
Change-Id: I4b2e5a0dcf38658cfe35bc0e5f24769c80f4d877
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Now QMAKE_RPATHDIR also includes @executable_path and @loader_path
on Apple platforms, and omits any others on iOS, tvOS, and watchOS
since they can't use paths outside the application bundle.
Change-Id: Ia8f76ebcddd51f44eca482a51ce1710369c8df10
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
Since Xcode 8 (beta 2) that tool is no longer available
through xcrun. We resort to xcodebuild instead.
Change-Id: If9d7b535c1cbac2caae0112b2003283aeff34fb9
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This fixes a regression introduced in
9daeb6fe9d.
Change-Id: I3100b307bb65c90bdc023be4993afaea666e409d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Preparation for Apple tvOS support, which shares a lot with the iOS
platform.
Change-Id: I543d936b9973a60139889da2a3d4948914e9c2b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The feature is enabled by CONFIG += unsupported/objc_namespace,
but can be easily integrated into other build systems such as
CMake or native Xcode by modifying the LD and LDFLAGS equivalent
for each build system.
This is a less resource-intensive alternative to using multiple
Qt builds with different -qtnamespace settings.
Note: The feature is not supported in any way, and should be
used with care.
Change-Id: Ibb8ba1159db36efd7106c117cc2210c7e2e24784
Reviewed-by: Martin Smith <martin.smith@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
the addition of qt's rpath belongs into qt.prf - even on mac.
so consolidate the two implementations.
as a nice "side effect", we get relative rpaths also on linux.
another "side effect" is that we don't unnecessarily add the qt rpath to
qt modules also on linux.
the qt rpath addition mechanism should not be responsible for setting
the policy who gets a relative rpath, so move the logic to higher-level
callers.
Change-Id: I52e8fe2e8279e7b1ac25fae758867a5cb1cafcf8
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
ppc/ppc64 and 32-bit x86 have been dead for a while.
consequently, the legacy macx-g++-64 spec was most probably not used.
which in turn meant that NATIVE_64_ARCH was never set (in particular on
windows hosts ...), which means that the android ndk host auto-detection
was effectively broken.
the arch code in mac/default_post.prf was also never triggered, so nuke
it as well.
Change-Id: Ic0775e40b273a22e0a15808cac328e0df33c2155
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
[ChangeLog][General Improvements] Qt's buildsystem now detects whether
the compiler supports C++14 and experimental support for C++1z. If the
compiler supports it, then Qt is automatically compiled using that
support.
\
This does not apply to user applications built using qmake: those are
still built with C++11 support only. To enable support for C++14 in your
application, add to your .pro file: CONFIG += c++14 (similarly for
C++1z).
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f5d01c42596
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Change-Id: I2e58c22301a433208718c26b362b4dda2b891f0e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Combining them could lead to intermediate builds having cached the
path, but not the version, resulting in later version checks failing.
Change-Id: Ia10f4268ce7b9e82c81627970236d68c00b80391
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Ensure the sdk is of recent enough version since:
1. we build Qt with the latest sdk version, so the app needs
to do the same to avoid compatibility problems e.g when linking.
2. using a launch screen to support iphone6 depends on sdk 8
3. Apple requires apps that are pushed to appstore to use the
latest version of the sdk.
Ideally we should store the sdk version used to build Qt, and
require that apps use the same version or newer. But this patch
will do until that is in place.
Change-Id: I18b06d09c1eda15122975b7169ca7a3372df6054
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This is triggered only when app is using Qt and Qt was built with "rpath"
configuration and project does not specify QMAKE_RPATHDIR explicitly.
Added rpath is made relative to app binary location if target path lies inside
Qt SDK, so all SDK bundled tools and examples will work automatically without
any changes. Tests are an exception here, since they are being run from their
build location by CI, we may not use relative rpath that work only in install
location.
Task-number: QTBUG-31814
Change-Id: I3690f29d2b5396a19c1dbc92ad05e6c028f8515b
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
The default is still DWARF instead of DWARF with dSYM for static builds
of Qt, so that debug builds of the final application don't take forever
to build due to generating the dSYM file.
Change-Id: I370d800d7c959e05c1a8780c4ebf58fff250daa1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
Otherwise the compiler may choose libc++ based on the deployment target,
and we'll end up with broken builds due to the mismatch between the two
libraries, eg:
Undefined symbols for architecture x86_64:
"std::ios_base::Init::Init()", referenced from:
__GLOBAL__I_a in libQt5Qml.a(qv4object.o)
...
"std::ios_base::Init::~Init()", referenced from:
__GLOBAL__I_a in libQt5Qml.a(qv4object.o)
...
"std::__throw_length_error(char const*)", referenced from:
...
This problem is not iOS specific, which is why the logic is moved
to the more generic mac/default_post.prf.
Change-Id: I28b94e614f9167fc0db84bbf1c88dd97d5629938
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
as this new cache category comes without side effects, we can
unconditionally create a cache whereever we are. this allows us to be
performant without explicit user action.
Task-number: QTBUG-31340
Change-Id: I6b88b20b61e8351aa8cbf94ad3eec65adac6e1d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
But still fall back to 'com.yourcompany', just like Xcode does for the
initial launch.
Change-Id: I89afadefafc254a0014aca197741d42a0199943e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Otherwise we won't pick up CONFIG+= changes on the command line or
from the project file.
Change-Id: I6f7e9380f971e6271de5659534e9565024fe041d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Non-framework builds would automatically link to whatever Qt library
matched the config at the time of running qmake, eg hard-coded to
libQtCore_debug, while Xcode itself allowed the user to switch between
release and debug configurations.
We now append an Xcode settings variable to the library path, which gets
resolved at build time depending on the current config in Xcode.
Change-Id: I12873e38a28d9595ef3fd0ae0ad849e6744833a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
"Make QGuiApplication::exec() run within NSApplicationMain()"
"Make Qt process native and timer events on Cocoa applications"
"Cocoa: Fix QFontDialog, QColorDialog auto-tests"
This reverts commits
1e14762b8de4b2a0b4badf7944e7d7
Change-Id: I80b65b5ee0297b090f807bd420664233dfc44f7b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Jake Petroules
Liang Qi
Oswald Buddenhagen
Oswald Buddenhagen
Lars Knoll
Edward Welbourne
Gabriel de Dietrich
Mike Krus
Jake Petroules
Tor Arne Vestbø
Thiago Macieira
Tor Arne Vestbø
Tor Arne Vestbø
Richard Moe Gustavsen
Adam Strzelecki
Oswald Buddenhagen
Morten Johan Sørvig