The test was already blacklisted for Windows 10 and Windows 7. Now it
is flaky on Windows 11 as well.
Blacklist it for all windows platforms.
Task-number: QTBUG-98478
Pick-to: 6.2 6.3 5.15
Change-Id: I870fb6ce80cfe244a76d08bf40677fdb6becab97
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Add a level of indirection via void_t such that
struct is_transparent {};
works, and not just
using is_transparent = <unspecified>;
Pick-to: 6.3
Change-Id: I3ca2af6a07e6989dc95abc10fb2d0078a5269e5b
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
577d698b8e changed QString::isUpper /
isLower behaviors to match Unicode semantics: a string is uppercase
if it's identical to its own toLower/toUpper folding. These semantics
come from Unicode so they're not up for debate.
That commit however left QByteArray untouched. Generally speaking, we
want to move away from QByteArray as "text storage" -- this has
partially happened between Qt 5 and Qt 6, where QByteArray went from
Latin-1 semantics to ASCII semantics. Still, QByteArray offers
toUpper/toLower and isUpper/isLower and all this family of functions
should be consistent in behavior.
Apply the same fix that was applied to QString.
[ChangeLog][Important Behavior Changes] The semantics of
QByteArray::isLower() and QByteArray::isUpper() have been changed. Now
lowercase (resp. uppercase) byte arrays are allowed to contain any
character; a byte array is considered lowercase (resp. uppercase) if
it's equal to its own toLower() (resp. toUpper()) folding. For instance,
the "abc123" byte array is now considered to be lowercase.
Previously, the isLower() (resp. isUpper()) functions checked whether
the byte array only contained ASCII lowercase (resp. uppercase)
characters, and was at least 1 character long. This had the side effect
that byte array containing ASCII non-letters (e.g. numbers, symbols,
etc.) were not lowercase nor uppercase.
[ChangeLog][QtCore][QByteArray] QByteArray::isLower() and
QByteArray::isUpper() now work correctly with empty byte arrays. The
semantics of these functions have been changed.
Pick-to: 6.3 6.2
Fixes: QTBUG-100107
Change-Id: Id56a42f01b2d1af5387bf0e6ccff0f824f757155
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The class is not intended for inheriting from it (see also
e502906305), so we can mark it as final
to explicitly forbid this. The tests were still using it as a base
class to clean the results during destruction, so fix them accordingly.
Task-number: QTBUG-99883
Pick-to: 6.3
Change-Id: I4a7ee3e2b462bd704e4b5a95ed733144805d6e5b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Unlike QString and QStringView, QByteArrayView and QByteArray don't
overload well.
Solve the overload issue the usual way: by making the QByteArray one a
Q_WEAK_OVERLOAD. This is trivial for QStaticByteArrayMatcher, which
isn't exported, but require QT_REMOVED_SINCE magic for
QByteArrayMatcher, which is.
The additional const char* overload has shielded us from the worst
fall-out so far, it seems, but it makes for a truly horrible overload
set:
matcher.indexIn(str, 3);
Q: Is the 3 here the length of the haystack or the value of the from
parameter?
A: It depends on decltype(str)!
If the (const char*, qsizetype, qsizetype=0) overload is the better
match, then 3 limits the haystack's length.
If, otoh, the (QByteArray(View), qsizetype) overload is the better
match, then it's the value of the from parameter.
As if this wasn't bad enough, QByteArray implcitly converts to const
char* by default!
A follow-up patch will therefore deprecate the (ptr, size) overloads,
so we de-inline the QByteArrayView ones to avoid having to touch the
implementation once more.
Found during 6.3 API review.
Pick-to: 6.3
Change-Id: I9640e0bdd298d651511adebcc85f314db9221d34
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Add a test (same techniques as for the 4+GiB check in
tst_qcryptographichash).
Takes ~1s to build the 4GiB test data here, and skips
when RAM is too low:
$ qtbase/tests/auto/corelib/text/qbytearraymatcher/tst_qbytearraymatcher haystacksWithMoreThan4GiBWork
[...]
QDEBUG : tst_QByteArrayMatcher::haystacksWithMoreThan4GiBWork() created dataset in 891 ms
[...]
$ (ulimit -v 2000000; qtbase/tests/auto/corelib/text/qbytearraymatcher/tst_qbytearraymatcher haystacksWithMoreThan4GiBWork)
********* Start testing of tst_QByteArrayMatcher *********
[...]
SKIP : tst_QByteArrayMatcher::haystacksWithMoreThan4GiBWork() Could not allocate 4GiB plus a couple hundred bytes of RAM.
Loc: [/home/marc/Qt/qt5/qtbase/tests/auto/corelib/text/qbytearraymatcher/tst_qbytearraymatcher.cpp(242)]
[...]
Found during 6.3 API review.
[ChangeLog][QtCore][QStaticByteArrayMatcher] Fixed searching in
strings with size > 2GiB (on 64-bit platforms).
Fixes: QTBUG-100118
Pick-to: 6.3
Change-Id: I1df420965673b5555fef2b75e785954cc50b654f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When int is 32-bit, 0x80000000L is int-min, and (consequently)
negating it makes no difference, so MSVC warns about this. Instead of
using an L suffix, wrap the constant in Q_INT64_C(). Do the same for
similar large constants in the same block.
Pick-to: 6.2 6.3
Change-Id: Ib371b932792f170ab7db2e472a4283df3a205af3
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Capturing a QFuture in the continuations attached to it results in
memory leaks. QFuture's ref-counted data can only be deleted when the
last copy referencing the data gets deleted. The saved continuation
that keeps a copy of the future (as in case of the lambda capture) will
prevent the data from being deleted. So we need to manually clean the
continuation after it is run. But this doesn't solve the problem if the
continuation isn't run. In that case, clean the continuation in the
destructor of the associated QPromise.
To avoid similar leaks, internally we should always create futures via
QPromise, instead of the ref-counted QFutureInterface, so that the
continuation is always cleaned in the destructor. Currently QFuture
continuations and QtFuture::when* methods use QFutureInterface directly,
which will be fixed by the follow-up commits.
Fixes: QTBUG-99534
Pick-to: 6.3 6.2
Change-Id: Ic13e7dffd8cb25bd6b87e5416fe4d1a97af74c9b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Avoid some unnecessary comparisons and add more tests.
Task-number: QTBUG-99799
Change-Id: I3aee9f0b62461d38dadbe8e969444e1cd1f94e68
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This is added specifically for the QPA platform and theme plugins, to
honor the QT_QPA_PLATFORM_PLUGIN_PATH environment variable and the
(inadvisable) -platformpluginpath command-line argument.
This removes the last QFactoryLoader used with an empty path (also the
only two that could be reached), which were causing a scan of the
application's binary directory whenever the platform plugin path was
set. In case of applications installed to /usr/bin, the entire /usr/bin
was scanned, which can be qualified as "not good".
Fixes: QTBUG-97950
Pick-to: 6.3
Change-Id: Ice04365c72984d07a64dfffd16b47fe1d22f26d3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Commit 289f909621 ("Test conversion of
ulonglong variant to JSON") was trying to ensure the result becomes a
double. So there's no reason to make a test in the _data() function.
Drive-by fix the UB condition on Windows (ulong is 32-bit, so 1ul << 63
is UB).
Change-Id: I0e5f6bec596a4a78bd3bfffd16ca4f8f5219f785
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
It was Linux-only and now even Linux is complaining:
tst_qmetatype.cpp:421:26: warning: ‘int pthread_yield()’ is deprecated: pthread_yield is deprecated, use sched_yield instead [-Wdeprecated-declarations]
Change-Id: I0e5f6bec596a4a78bd3bfffd16cb1eadfa301f16
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
All primitive types are initialized and have been since at least commit
33cd680ddb ("New QMetaType
representation").
Change-Id: I0e5f6bec596a4a78bd3bfffd16cb1fe22dc5c8f5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When some test function fails (even as expected), it can leave the
event dispatcher in an inconsistent state where the posted events
queue might not be empty. As a result, this may break the internal
logic of the next test function that is run.
So, calling eventDispatcher->processEvents() after each completed
function resets the event dispatcher to its initial state, which
fixes the problem.
Pick-to: 6.2 6.3
Change-Id: I5a54f892d09a6eca73c8fc82875ce3b9ce4a3242
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We set the wakeUps atomic to prevent multiple WM_QT_SENDPOSTEDEVENTS from
being posted. However, this might happen right after the event processing
thread cleared the atomic, but before it processed the previous
WM_QT_SENDPOSTEDEVENTS message. In that case, we end up with a set
atomic and an empty event queue, resulting in the event loop to block
even though there are posted QEvents.
To prevent that, always reset the atomic when we handle the
WM_QT_SENDPOSTEDEVENTS message. In that case, we either call
sendPostedEvents, or startPostedEventsTimer. The former already resets
wakeUps; reset it in the latter as well.
Fixes: QTBUG-99323
Pick-to: 6.2 6.3 5.15
Change-Id: I931c02be9c42b02e8ca20daba5059cd8185f0a37
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Add two tests for some problematic scenarios where the behavior is not
consistent across platforms and depending on which event dispatcher is
used:
1) reliably waking up the dispatcher when posting events from a worker
thread.
That test fails 100% of the time on Windows no matter what type of
application is created. It passes reliably on Linux and macOS for both
core and gui applications.
2) waking up the dispatcher when we post an event from within an
event handler.
That test fails 100% of the time on Windows, both with core
and GUI event dispatchers. On macOS, the test fails 100% of the time
with the core dispatcher, and passes 100% of the time with the GUI
dispatcher. On Linux, it passes only if a Glib based event dispatcher
is used; the default Unix event dispatcher (which is also the one
used on macOS for core applications) fails.
Task-number: QTBUG-99323
Pick-to: 6.2 6.3 5.15
Change-Id: I2489533b9f0032488707777be0512bb933669a7d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Bug introduced in 6.0. This is the only unprotected d_ptr I could find.
[ChangeLog][QtCore][QMetaType] Fixed a bug that would cause
QMetaType::compare() and QVariant::compare() to crash on invalid meta
types and variants.
Pick-to: 6.2 6.3
Fixes: QTBUG-99960
Change-Id: I0e5f6bec596a4a78bd3bfffd16cb1f7b2d146688
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Previously, if you had multiple entries with the same name in an object,
and some of them were again objects or arrays, parsing the JSON document
would leak memory.
Also, we use std::stable_sort instead of std::sort now, so that we don't
accidentally randomize the order of elements with equal keys.
[ChangeLog][QtCore][JSON] A memory leak in the JSON parser when reading
objects with duplicate keys was fixed.
Pick-to: 5.15 6.2 6.3
Fixes: QTBUG-99799
Change-Id: Ic2065f2e490c2d3506a356745542148ad9c24262
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We can handle the UTF-8 case by reinterpreting it as Latin-1.
This way, the suffixIndex stays valid as a return value.
As a drive-by, optimize away toLatin1() calls by using a QVLA.
We really need a better way of converting UTF-16 -> L1 than
qt_to_latin1()...
[ChangeLog][QtCore][QVersionNumber] fromString() now takes
QAnyStringView (was: QString, QStringView, QLatin1String)
and a qsizetype pointer (was: int pointer).
Change-Id: I86abaadba2792658fbf93ccd1e0b86e3302c697c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This completes the update to qsizetype in this class, adding a couple of
methods that need to be removed in Qt 7. They're only required where int
is not qsizetype (i.e., 64-bit platforms).
Change-Id: I0e5f6bec596a4a78bd3bfffd16c9de29bec4c637
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
qstrncmp() would stop at the first null character, which isn't correct.
The tests that had been disabled in tst_qstring.cpp (with an inaccurate
comment) were actually passing. I've added one more to ensure that the
terminating null is compared where needed.
[ChangeLog][QtCore][QLatin1String and QUtf8StringView] Fixed a
couple of bugs where two QLatin1Strings or two QUtf8StringViews
would stop their comparisons at the first embedded null
character, instead of comparing the full string. This issue
affected both classes' relational operators (less than, greater
than, etc.) and QUtf8StringView's operator== and operator!=.
Pick-to: 5.15 6.2 6.3
Change-Id: I0e5f6bec596a4a78bd3bfffd16c90ecea71ea68e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Files that are not meant to be executed should not have the execute
permission bit set.
Task-number: QTBUG-81503
Pick-to: 6.3 6.2 5.15
Change-Id: I10666bd958adfc5c425216bcff7456facd1fe5f3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
The QDateTimeData &d it's passed is a copy that's about to be
modified; before we do so, we haven't detached so its internals have a
ref-count of two, contradicting an assertion in the non-const
Data::operator->(); so just directly access d.d->m_timezone, since we
know that spec == TimeZone implies !isShort().
Added test that triggered the assertion and now doesn't.
Fixes: QTBUG-99668
Pick-to: 6.3 6.2 6.2.3 5.15
Change-Id: I07321ad91be5adce524be18e4ab82eee7110dc6a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
A derived gadget has an is-a relationship with its base type. It
should be convertible. In fact, canConvert() already tells us it is.
Change-Id: I71a5ac9afd78e88adb23b4d0e757f34077f63207
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We want to preserve nullness where possible. Test that various ctors
do the right thing when presented with null input.
Pick-to: 6.3
Change-Id: Ia1a1d4fb3c919b4fed2d9b87827815a1b5072c54
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Any of these timers must be stopped before the corresponding test
function completes. Otherwise, functors will operate on dangling
pointers, which can lead to failures or unreliability of other tests.
Fix this by setting a correct context in the QTimer::singleShot()
call.
Pick-to: 6.2 6.3
Change-Id: Icd23f6d9a2c6e7f33495d6badc4080a1b10c19f8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
By GHS the only C locale is supported.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I3d89f1b2d9eb7f77b75e13a5ca65cebc24538890
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This does exactly what insert() on Qt associative containers does, but
allows to express the intent of using the STL-incompatible Qt insert()
semantics, in an STL-compatible way, instead of leaving the reader of
the code wondering what semantics are expected.
This is part of a very-long-term goal of fixing Qt associative
container's insert() behavior, in which QFlatMap, being an affected,
but private-API type, is used for proof-of-concept purposes.
Task-number: QTBUG-99651
Pick-to: 6.3 6.2
Change-Id: I69010285438259918aef659d3235180c1b5be696
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We use raw pointers to the Nodes in the QHash which is
inherently fine, but we are then subject to invalidation when
nodes are moved around during deletion.
In trim() we don't actually need to iterate the linked-list
since the node we are interested in is always chain.prev
Pick-to: 6.3 6.2 6.2.3
Fixes: QTBUG-99710
Task-number: QTBUG-99224
Task-number: QTBUG-99240
Change-Id: I9c2ed69b29e3cadca013113a3553deb44d7382fc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
... in an attempt to foster the use of this data structure by making
it less onerous to spell.
Pick-to: 6.3 6.2
Change-Id: Ib9d17029c75278edde6ba90f65f68af179a6d230
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QFlatMap, like its public brethren, features the broken Qt-style
insert() behavior (what the STL calls insert_or_assign()), which
makes its insert() unusable for actual STL-style insert() work,
with no replacement except the size-check-and-index-operator trick:
const auto oldSize = c.size();
auto &e = c[key];
if (c.size() != oldSize) {
// inserted
}
Even though QFlatMap::insert() appears to return the correct info,
it's useless, because the old value has been assigned over by the
time insert() returns.
Pick-to: 6.3 6.2
Change-Id: If4173c42523a128dfd22ab496dde0089ba73f41c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The documentation says that if it's negative, we find the null
termination. This bug was introduced with the clean up to use
QByteArrayView in commit 8897aa071a.
Fixes: QTBUG-99640
Pick-to: 6.3 6.2
Change-Id: Ib42b3adc93bf4d43bd55fffd16c89fa4a960f3a9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Suppress the error:
C1128: number of sections exceeded ... limit: compile with /bigobj
Fix by setting the correct target in CMake script.
Pick-to: 6.2 6.3
Change-Id: If241fbaa70b68ca698dae2d484146e7bac970609
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
When creating proxied models, make the source model a QObject child of
the proxy model, so the source isn't leaked when the proxy is deleted.
This drove asan nuts.
Pick-to: 6.3 6.2 5.15
Change-Id: I0f7fc9ab8e99d030c941cfb336ee4e2323b362ae
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QCoreApplication::installTranslator() does not take ownership of the
QTranslator. The QTranslator dtor removes itself from QCoreApplication
again.
Pick-to: 6.3 6.2 5.15
Change-Id: I17eb7ab350631eb32fe76af29d9a576a0efa05d8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- There is no mounted partition, where we can create/delete files at runtime.
Tests should be excluded for now.
Pick-to: 6.2 6.3
Change-Id: I1c4db13d35da7d570c4bf787299d829e08951195
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... as opposed to QByteArray::toHex('\0'), which doesn't.
Picking to all LTSs because it's in a test.
Pick-to: 6.3 6.2 5.15
Change-Id: I392d5714c4865e530a246ed30a13cdac26b98e0b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- There is no possibility to unpack *.zip archive anywhere on test device or save any file.
Currently we don't have mounted file system.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I8c8d272a92b4475a7548bd10d32fc4203672926b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When fallbacks are disabled for QSettings then it should not be
falling back to any child groups or keys that might exist in a
fallback set of settings.
Fixes: QTBUG-85295
Change-Id: I563999293a103702035c8d3b027b59b94ca43c0e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test helper is expected to crash, but when built with asan, it
just fails.
Skip the test in that case.
Pick-to: 6.3 6.2 5.15
Change-Id: I583142f5ec623895df62498100c1a30539b149ab
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We didn't delete the new'ed up QMetaTypeInterfaces, causing asan to
complain.
Fix by storing them in strong references alongside their users in a
statically-allocated container.
We use shared_ptr to hold them, because QMetaTypeInterface doesn't
have a virtual destructor, so deleting objects of the TypeInfo types
(plural!) derived from QMetaTypeInterface though a pointer to the base
class is UB. The shared_ptr constructor, however, is templated, so it
stores the correct call (~TypeInfo()) in its type-erased deleter.
We can't use std::make_shared(), because that doesn't support
aggregate initialization until C++20, so we manually new up the
TypeInfos.
5.15 is not affected.
Pick-to: 6.3 6.2
Change-Id: Ic7ec88c34e02a9e0dd3421848c0c0885f4756702
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
We now have a more reliable test for the case with freeSpaceAtBegin(),
so remove the old test, after we verified it actually doesn't even
test that case.
Task-number: QTBUG-99330
Pick-to: 6.3 6.2
Change-Id: Ic108a722cd2fef1e63a05085a76d7572d1f8c875
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The construction of the byte array doesn't actually yield
freeSpaceAtBegin() (anymore?), so the comment above it is misleading
(and the test didn't manage to catch QTBUG-99330, either).
Before removing the misleading test, verify that this assumption is
actually correct across all platforms.
Task-number: QTBUG-99330
Pick-to: 6.3 6.2
Change-Id: I2f497321abc26c4148ced5ac12a5880b9ff5ba9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Amends 9b320edb53.
The above commit made the mistake of relying on the 30yr+ old
fundamental relation
size() - capacity() == freeSpaceAtEnd()
which, however, Qt 6's prepend()-optimization (freeSpaceAtBegin())
broke. Because of that, while size() - capacity() may be large enough
to hold the new data, if freeSpaceAtBegin() > 0, then freeSpaceAtEnd()
may not.
Fix by inspecting freeSpaceAtEnd() instead of capacity(). The
following reserve() call is unaffected, since it internally already
adds freeSpaceAtBegin() to the requested size, which is why the
unconditional reserve() in 9b320edb535a0fbe118933d2e983b73f90c32685^
worked while 9b320edb535a0fbe118933d2e983b73f90c32685's capacity()
check did not.
Fixes: QTBUG-99330
Pick-to: 6.2 6.3
Change-Id: I520f36216011423f97a24484263acd40d8b1fa43
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
- Stress test creates too many threads on run time.
Testing system is limited in 123.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I215074fa432c8aa18b2a753169646841c01d0b2a
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As mentioned in the linked bugreport, we are not allowed to distribute
the uncompressed files from one of the XML test datasets that we use
in our tests.
This patch removes the uncompressed version, and replaces it by the
xmltest.zip archive taken from [0].
Once the test is started, QZipReader is used to uncompress the archive,
and once the test is done, the uncompressed data is removed.
However the test data from [0] is very old, so it is slightly different
from what we had previously (the previous data was taken from w3c).
As a result, 4 test cases are failing with this data. To fix it, we
store the updated versions of 4 xml files separately, and replace them
after uncompressing the archive.
[0]: http://www.jclark.com/xml/
Fixes: QTBUG-81503
Pick-to: 6.3 6.2 5.15
Change-Id: Ied5233970a529deebca56b1eab07fe1c328a2ee0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Tests were leaking objects even if all tests passed. In two cases,
there just wasn't a delete at all, in a third, the existing delete
wasn't reached because of a QSKIP.
tst_QPropertyAnimation is now, locally, LSan-clean.
Pick-to: 6.3 6.2 5.15
Change-Id: Ia53d6f6e467f1d2598a7c50efcdf3a3732fe54df
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Due to the way Qt 5 and 6 registered type names, they end up producing
different type names for the same content for a typedef. For example,
because Q_DECLARE_METATYPE can't manage a comma (it's a macro), users
are forced to write something like:
using MyTypeMap = QMap<QString, MyType>
Q_DECLARE_METATYPE(MyTypeMap)
Qt 5's Q_DECLARE_METATYPE's argument "MyTypeMap" was the only name we
knew about the type, so that's what got saved in the stream. However, Qt
6 QtPrivate::typenameHelper is much more clever and obtains the name
from the compiler itself, so it "sees through" the typedef and registers
"QMap<QString,MyType>" as the official type name.
If another library/plugin has a different typedef name for the same type
(e.g., StringTypeMap), it's indeterminate which type gets saved and will
even change from run to run (depends on the QHash order).
[ChangeLog][QtCore][QDataStream] If QDataStream is used with a
QDataStream::Version < Qt_6_0 to serialize a user type that was
registered via a typedef with the metatype system, the typedef's name is
used in the stream instead of the non-typedef name. This restores
compatibility with Qt 5, allowing existing content to read the same
QDataStreams; reading from older Qt 6 versions should not be affected.
(Note: if more than one typedef name is registered, it's indetermine
which name gets used)
Fixes: QTBUG-96916
Pick-to: 6.3 6.2
Change-Id: I2bbf422288924c198645fffd16a8d811aa58201e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
By using the bucketForHash function we can loop through and find
some appropriate keys to test the edge-case. This will then
automatically keep the test working even if some internals
of QHash changes.
We do this because certain changes which change the bucket the
pre-selected keys would end up in could make the test a no-op,
without warning. And recent and upcoming changes have changed
both this and erase(). We limit the search-space to
the minimum numBuckets * 4, where minimum numBuckets is current
128.
Change-Id: I13b0bce15ee884144e3248846be34667fb5d35cc
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
... and add some additional checks that hopefully leave the next
reader of the code a little less confused than this one was.
Pick-to: 6.3 6.2 5.15
Change-Id: I73c1b9b1ed1683e3b2de0d811d9b20d65464dff4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
memcpy() mustn't be called with a nullptr, even if the size is zero.
Fixes ubsan error:
tst_qiodevice.cpp:561:15: runtime error: null pointer passed as argument 1, which is declared to never be null
Even though ubsan only complained about one of them, fix all three
occurrences of the pattern in the test.
Pick-to: 6.3 6.2 5.15
Change-Id: I5c06ab4a20a9e9f8831392c46c6969c05248fdac
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The first case is simple, as it's a static overflow. Theoretically,
the compiler would be allowed to just remove the complete function as
dead code. This is an error left from the port from int to qsizetype:
Qt 5.15 there has uint(MaxAllocSize) + 1, so use quint here again,
qint64 is wrong.
In the second case, we _may_ reach alloc == MaxAllocSize. Check that,
if we do, we don't then add 1 to it.
Pick-to: 6.3 6.2
Change-Id: I93044ed6f1b77559642fa1e4e8f313cf59eeeb79
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
- add test resources to binaries
- link Qt::Gui to tst_qpointer for static build case
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I311827b9c641eaf9537091b051c15f9fcbcb9f0c
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that all platforms can deal with the full tst_QMetaType again,
remove the last traces of the workaround.
Pick-to: 6.3
Change-Id: I530cab8413f8b68903991b30a1f29b5871877a88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QHash::operator[] could grow the hash even if the key being
looked up already existed. This in turn invalidated all iterators.
Avoid this by refactoring findOrInsert() to not grow if the key
already exists.
Added advantage is that this should make lookups of existing keys
slightly faster.
Fixes: QTBUG-97752
Pick-to: 6.3 6.2
Change-Id: I9df30459797b42c434ba0ee299fd1d55af8d2313
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Let's see whether splitting the TUs has made the test amenable to be
compiled with MinGW again.
Pick-to: 6.3
Change-Id: Icde1bad20943c7648dbb119ca879bce62325bd6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
There's no sense in copying a ring buffer. Moving is enough. This
marks an important step on the way to preventing accidental copies of
ring buffer content, because the 'QList buffers' member can now no
longer be implicitly shared. While the compiler will still emit the
code for detach()ing, it will now never be executed.
Pick-to: 6.3
Change-Id: I968bfe3e50c46720ed4baca55c99c1f9c518f653
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Let's see whether splitting the TUs has made the test amenable to be
compiled on Clang for ARM again.
Pick-to: 6.3
Change-Id: I6bf1e31189f5058dc393adefabaf3014dce4bcf2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 925ad78024.
Reason for revert: Meanwhile, the QNX VM has been assigned more
resources, and the offending test function been split. Re-enable the
test on QNX, to get back to previous test coverage.
Fixes: QTQAINFRA-4669
Pick-to: 6.3
Change-Id: Ib085fbfa7e0d8445f007d1a9346cee3113620720
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Check, in tst_qvarlengtharray, that the forwarding header still works.
Pick-to: 6.3
Change-Id: Ia03cf48457f538287880bb676aea3fa44aeb255f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch installs a QAbstractItemModelTester in the
QSortFilterProxyModel tests.
Change-Id: I9bdcc21ba12f919c91c5b9514a5f4362437318c2
Reviewed-by: David Faure <david.faure@kdab.com>
QHash changes some of its preconditions, so we must not call
findNode without verifying !isEmpty()
Task-number: QTBUG-91739
Task-number: QTBUG-98436
Change-Id: I2701b9a01187530f541a7c9a12db56c92f856d87
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Especially static inline variables. This greatly reduces the amount of
code that existed in macros, moving them to templates.
Additionally, this removes one level of indirection from
Q_APPLICATION_STATIC by removing the std::unique_ptr. We now directly
manage the object's storage.
Change-Id: I2cffe62afda945079b63fffd16bcc825cc04334e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Large amount of threads is unstable and do not finish in given time
Pick-to: 6.2
Change-Id: I0ce4c8cd278d6611c9e9da7326048279ccc458fd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also change usage of QDir::currentPath to QDir::tempPath
instead as QNX tests are run on CI at qemu over NFS.
Pick-to: 6.2
Change-Id: I2e1d6629299acd125117bcce90320c70eeb4a1a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modify similar like is used for Windows
Pick-to: 6.2
Change-Id: I133a8dde2e78cc66aa9544246cd750a6543b4883
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Filter out the last argument of type QPrivateSignal from the signal's
arguments passed to QtFuture::connect().
Pick-to: 6.2
Fixes: QTBUG-92501
Change-Id: Idcd6baba1f01fcc94fa64b1c7030a629d01ed7a1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
All Qt 6 containers have "fast" prepend these days. Except
QVLA. Instead of enabling "fast" prepend for QVLA, slowing down
idiomatic QVLA use, simply deprecate prepend().
There appear to be no users of this function in qtbase outside tests.
[ChangeLog][QtCore][Deprecation Notices][QVarLengthArray] Deprecated
prepend() because QVarLengthArray is the only Qt container without a
"fast" prepend. If you require that functionality, even though it's a
linear operation, then use insert(cbegin(), ~~~) instead.
Change-Id: I39ff1dd7d4de7fc08d5380a5a7450dd8c8996fe2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove scaffolding in the test again.
[ChangeLog][QtCore][QList] Fixed a regression that caused the range
constructor to fail for pure input_iterator's.
Pick-to: 6.2
Fixes: QTBUG-99036
Change-Id: I72d01a9c44c3862c335d96538f26a453b4c7c554
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code had several bugs:
- it immediately clobbered *this with new state, before having copied
over the elements from the old to the new buffer
- when buffer relocation threw, it would keep the new (partially-filled)
buffer and throw away the old
- it unconditionally used std::move() for non-relocatable types, making
it impossible to restore the original buffer when a move throws
Instead of clobbering *this with new state, do all the work on the
side and change *this only once the reallocation has happened
successfully.
Also use q_uninitialized_relocate_n() and unique_ptr in the
implementation to simplify the code. The former got the necessary
update to use std::move_if_noexcept() instead of an unconditional
std::move() for the non-relocatable case.
[ChangeLog][QtCore][QVarLengthArray] The append()-like functions are
now strongly exception safe. This means reallocation will now use
copies instead of moves, unless the value_type has a noexcept move
constructor.
Fixes: QTBUG-99039
Change-Id: I031251b8d14ac045592d01caed59d4638c3d9892
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This commit extends functionality for QLocale::codeToLanguage()
and QLocale::languageToCode() by adding an additional argument
that allows selection of the ISO 639 code-set to consider for
those operations.
The following ISO 639 codes are supported:
* Part 1
* Part 2 bibliographic
* Part 2 terminological
* Part 3
As a result of this change the codeToLanguage() overload without
the additional argument now returns a Language value if it matches
any know code. Previously a valid language was returned only if
the function argument matched the first code defined for that
language from the above list.
[ChangeLog][QtCore][QLocale] Added overloads for codeToLanguage()
and languageToCode() that support specifying which ISO 639 codes
to consider.
Fixes: QTBUG-98129
Change-Id: I4da8a89e2e68a673cf63a621359cded609873fa2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the in-place constructor throws, the old code had already updated
the container's size(). Fix by delaying the update to after the
in-place construction.
[ChangeLog][QtCore][QVarLengthArray] Fixed a bug whereby a failed
append() would leave the container with an inconsistent size().
Pick-to: 6.2 5.15
Change-Id: Ief1e668d945149bd8ba96c8af1398baaa7876880
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There seems to have been no-one that checked a simple empty()/isEmpty()...
Pick-to: 6.2 5.15
Change-Id: I7fa567f556532dfa21db759719f1303a768a9732
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If one destroys a running QThread, so far the behavior has been to crash
(à la std::thread) -- assuming the thread hasn't already signalled that
it has finished. This behavior is hostile to solutions such as using
QThread::create(), which always require a wait() before destroying the
thread object.
We can use the opportunity to change the behavior without breaking any
valid code. Instead of crashing, inside QThread's destructor we can ask
the new thread to quit, and then join it (à la std::jthread). This
simplifies the implementation of long-living runnables and the code that
manages them.
Deploying this solution for the whole QThread class may not be entirely
painless. While no correct code would work differently with the proposed
changes, incorrect code that deletes a running thread would no longer
crash "loudly" -- instead, it might deadlock "quietly", have memory
corruptions, etc.
Hence I'm limiting this approach to only the threads created by
QThread::create(), at least for the time being. This also side-steps
perhaps the biggest problem of generalizing the approach, which is that
placing such interrupt+join logic into~QThread's destructor would cause
it to be run _after_ a QThread subclass' own destructor has run,
destroying the subclass' data members too early. This might create
an antipattern if one chooses to subclass QThread. With create(), a
subclass in question exists, and it indeed has NSDMs, but it's entirely
under our control (in fact, I'm placing the logic just in its dtor).
[ChangeLog][QtCore][QThread] Destroying a QThread object created by
QThread::create() while the thread that it manages is still running will
now automatically ask that thread to quit, and will wait until the
thread has finished. Before, this resulted in a program crash. See the
documentation of QThread::~QThread() for more details.
Change-Id: Ib268b13da422e277ee3ed6f6c7b2ecc8cea5750c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The PRINT_2ARD_TEMPLATE macro expansion alone is responsible for about
50% of the compile time and RAM requirements of tst_qmetatype.cpp. By
factoring it into its own TU, we reduce the maximum memory load on my
machine from 4.0GiB to 2.5GiB, provided we don't parallelize the
build, then we take 0.5GiB more.
This is a quick-fix for the QNX build problems currently plaguing the
CI. Going forward, we should probably have a better solution, whatever
that may be.
Task-number: QTQAINFRA-4669
Change-Id: I2732b4c25b369b15cce1c7afe222d041ecb6795a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
... so it can be used by multiple .cpp files.
Task-number: QTQAINFRA-4669
Change-Id: I7212b9b08cd3bfa44ee741ee4789d1d0024e4708
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When deleting the last item in a chain, without it being the last item
in the chain, then we re-use the iterator which was passed in as an
argument. This is wrong if we detached earlier in the function, and
means we return an iterator to the previously shared data.
Pick-to: 6.2
Change-Id: I7da6309e23a32073da59e7da0cbfd1d16734f1ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
- GHS compiler is not fully compliant with iec559. Therefore we need
to update is_iec559 checking for GHS case.
Pick-to: 6.2
Change-Id: Ia094509d26bf5f0109f2937547a056267019cffb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
[ChangeLog][QtCore][QStringBuilder] Added support for QByteArrayView.
Change-Id: If2c23549d533dd31c320f3ee455fcd01ea5b460a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The new overload allows creation of files with non-default permissions.
This is useful when files need to be created with more restrictive
permissions than the default ones, and removes the time window when
such files are available with less restrictive permissions.
[ChangeLog][QtCore][QFile] Added QDir::open() overload that
accepts permissions argument.
Fixes: QTBUG-79750
Change-Id: Iddfced3c324e03f2c53f421c9b31c76dee82df58
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The new argument allows atomic creation of files with non-default
permissions.
Task-number: QTBUG-79750
Change-Id: I4c49455b41f924ba87148302c8d0f77f5de0832b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Commit 6cee204d56 introduced overloads
of lastIndexOf() which drop the 'from' argument, inadvertently fixing
QTBUG-80694, but failed to provide the new overloads for all existing
lastIndexOf() overloads, making the fix for QTBUG-80694 incomplete.
This patch completes the fix, by adding the missing overloads (for
char-likes) and also adds the missing (non-regex) tests to
tst_qstringapisymmetry.
Also amends 1c164ec7f2.
Fixes: QTBUG-80694
Change-Id: Ib4b3d597d658ce2edf01a2bce0d711ecea593d6e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
std::function, which is used to store the type-erased continuation
lambdas, requires the passed callable to be copy-constructible. This
makes impossible to use move-only callables with continuations/handlers.
In particular, it makes impossible passing lambdas that are capturing
move-only objects. The workaround is to store the continuation lambda
inside a wrapper for the callable, which stores the move-only lambda in
a QSharedPtr and can be stored in std::function, since it's copyable.
Pick-to: 6.2
Fixes: QTBUG-98493
Change-Id: I8b7a22fcf68dc132b3c533216a7a1665e9f9fb0a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The only documented replacements for Q*String*::arg() are sequences like
%1, %2, %3 -- where the n-th number is expressed using a sequence of
ASCII digits [1].
The code parsing the replacements however used the QChar::digitValue()
function. That function simply checks if a QChar has a *Unicode digit
value* (no matter what its block/category is), and if so, returns the
corresponding digit value as an int (otherwise returns -1).
The result of this is that a sequence like "%¹" or "%१" actually
triggered substitutions (both count as "1"). Similarly, QChars with
a digit value would be parsed as part of longer sequences like "%1²"
(counting as "12" (!)).
This behavior is weird, undocumented, and extremely likely the usual
backstabbing by Unicode by using "convenience" QChar methods -- that is,
never *intended* by the implementation.
This commit deprecates (via warnings) such usages, which for the time
being are left working as before (in the name of backwards
compatibility). At the same time: given it's extremely unlikely that
someone would be deliberately relying on this behavior, it implements
the desired change of behavior (only accept sequences of ASCII digits)
starting from Qt 6.6, that is, after the next LTS.
Throughout Qt 6's lifetime users will still be able to control arg()'s
behavior by setting an env variable, but that variable (and the support
for Unicode digits) will disappear in Qt 7.
To summarize:
* Qt 6.3->6.5: default is Unicode digits, env var to control
* Qt 6.6->6.x: default is ASCII digits, env var to control
* Qt 7: only ASCII digits, no env var
[1] That's the name Unicode gives to them, cf. https://www.unicode.org/charts/PDF/U0000.pdf
[ChangeLog][QtCore][Deprecation Notices] The arg() functions
featured in Qt string classes have always been documented to require
replacements tokens to be sequences of ASCII digits (like %1, %2, %34,
and so on). A coding oversight made it accept sequences of arbitrary
characters with a Unicode digit value instead. For instance, "%2੩" is
interpreted as the 23rd substitution; and "%1²" is interpreted as the
12th substitution. This behavior is deprecated, and will result in
runtime warnings. Starting from Qt 6.6, arg()'s behavior will be changed
to accept only ASCII digits by default. That means that "%1²" is going
to be interpreted as substitution number 1 followed by the "²" character
(which does not get substituted, so it gets left as-is in the result).
Users can restore the previous semantics (accept Unicode digits) by
setting the QT_USE_UNICODE_DIGIT_VALUES_IN_STRING_ARG environment
variable to a non-zero value. In Qt 7, arg() will only support sequences
of ASCII digits. Note that from Qt 6.3 users can also set
QT_USE_UNICODE_DIGIT_VALUES_IN_STRING_ARG to zero; this will make arg()
use ASCII digits only, in preparation for the future change of defaults.
Change-Id: I8a044b629bcca6996e76018c9faf7c6748ae04e8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In QNX, instead of #include <elf.h>, we have to use #include <sys/elf.h>
since that file is placed in a subdirectory.
Also removed the previous workaround.
Fixes: QTBUG-97833
Change-Id: Id932a5eeb618a42c8778459cdfd8bb5bf903523c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test currently passes in Qt 6, but fails in Qt 5.15, thus the
QT_VERSION check.
Pick-to: 6.2 5.15
Task-number: QTBUG-98653
Change-Id: I3c7b9bc7ef74f605ff63768b38c473296274d0de
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... instead of QT_PREPEND_NAMESPACE(qHash), which is qualified (prepends at least '::'), and therefore disables ADL.
This is not a problem as long as we wrote our qHash() overloads as free functions (incl. non-hidden friends), but it should™ fail for hidden friends, so use the old using-std::swap() trick to bring QT_PREPEND_NAMESPACE(qHash) into scope, proceeding with an unqualified lookup.
Pick-to: 6.2
Change-Id: I00860b2313699849f86bfe3dd9f41db4ce993cd3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
These long target names can quickly lead to exceeding Windows' max path
length.
Pick-to: 6.2
Change-Id: Ibd77e53464a71221f9302d490afbe9c41c16646d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The old-syle signal-slot syntax had the advantage of not delivering
signals to slots in derived classes after that derived class's
destructor had finished running (because we called via the virtual
qt_metacall). The new syntax made no checks, so a conversion from the
old to the new syntax may introduce crashes or other data corruptions at
runtime if the destructor had completed.
This commit introduces a Q_ASSERT to print the class name that the
object is not any more. Since this is in inline code, this should get
enabled for users' debug modes and does not therefore depend on Qt being
built in debug mode.
It required some Private classes to be adapted to the new form, by
exposing the public q_func() in the public: part.
Pick-to: 6.2
Fixes: QTBUG-33908
Change-Id: Iccb47e5527544b6fbd75fffd16b874cdc08c1f3e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QAbstractProxyModel::itemData/setItemData should behave
just like data()/setData() instead of calling the
QAbstractItemModel implementation.
Before this change the QAbstractProxyModel implementation
calls its the QAbstractItemModel implementation,
which ends up calling data()/setData() in a loop
bypassing the convenience of itemData/setItemData.
[ChangeLog][QtCore][QAbstractProxyModel] The itemData()
and setItemData() functions will now call the respective
implementations in the source model (after mapping the
index to a source index), matching what data() and
setData() already did.
Before, the proxy model simply called the default
implementations of itemData()/setItemData() in its own
base class (QAbstractItemModel).
Change-Id: I9e680d355f44fa130660dd7e1c8ac37484c1566e
Reviewed-by: David Faure <david.faure@kdab.com>
Use variable args macros to swallow any extra commas in the
expression. To use this, the type of the exception has to be first.
Use Eddy's suggestion for a new name to avoid breaking the old macro.
[ChangeLog][QtTest] Added QVERIFY_THROWS_EXCEPTION, replacing
QVERIFY_EXCEPTION_THROWN, which has therefore been deprecated.
Change-Id: I16825c35bae0631c5fad5a9a3ace4d6edc067f83
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch adds an overload of the QDir::mkdir() method that
accepts permissions. This allows setting of the directory
permissions at the time of its creation.
[ChangeLog][QtCore][QDir] Added QDir::mdkir() overload that
accepts permissions argument.
Task-number: QTBUG-79750
Change-Id: Ic9db723b94ff0d2da6e0b819ac2e5d1f9a4e2049
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Q(Multi)Map mutating functions that take reference to a key and/or a
value (e.g. insert(), take(), etc.) must make sure that those references
are still valid -- that is, that the referred objects are still alive --
after the detach() call done inside those functions.
In fact, if the key/value are references into *this, one must take extra
steps in order to preserve them across the detach().
Consider the scenario where one has two shallow copies of QMap, each
accessed by a different thread, and each thread calls a mutating
function on its copy, using a reference into the map (e.g.
map.take(map.firstKey())). Let's call the shared payload of this QMap
SP, with its refcount of 2; it's important to note that the argument
(call it A) passed to the mutating function belongs to SP.
Each thread may then find the reference count to be different than 1 and
therefore do a detach() from inside the mutating function. Then this
could happen:
Thread 1: Thread 2:
detach() detach()
SP refcount != 1 => true SP refcount != 1 => true
deep copy from SP deep copy from SP
ref() the new copy ref() the new copy
SP.deref() => 1 => don't dealloc SP
set the new copy as payload
SP.deref() => 0 => dealloc SP
set the new copy as payload
use A to access the new copy use A to access the new copy
The order of ref()/deref() SP and the new copy in each thread doesn't
really matter here. What really matters is that SP has been destroyed
and that means A is a danging reference.
Fix this by keeping SP alive in the mutating functions before doing a
detach(). This can simply be realized by taking a local copy of the map
from within such functions.
remove() doesn't suffer from this because its implementation doesn't do
a bare detach() but something slightly smarter.
Change-Id: Iad974a1ad1bd5ee5d1e9378ae90947bef737b6bb
Pick-to: 6.2
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
tst_QDate::startOfDay_endOfDay_data() naively assumed some zones would
exist. They don't on QNX, apparently.
Change-Id: I3a364964d03f59f5869b4b7639f089dd303180b1
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
I was briefly confused about why an Etc/GMT+3 test was using GMT as
localtime. Fortunately I worked it out before mis-"correcting" it.
Change-Id: I7b0473c7d3974ef186e1170cf4999aca52aaaf45
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
On QNX, tst_QDateTime::fromStringStringFormat_localTimeZone_data()
failed to set up any rows for the data-driven tests to fetch, leading
to an assertion failure on trying to fetch a row.
Change-Id: I7c405b1142a8cb6d445b501ea44fe3d440570cf3
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
The compiler runs out of memory and fails to compile tst_qmetatype.cpp.
Set TST_QMETATYPE_BROKEN_COMPILER from a previous compiler workaround
for QNX to disable the most expensive part of the test.
Task-number: QTQAINFRA-4669
Change-Id: I3a99b6b790dc074e9d1db262e758555fb45e4331
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
If we detach from a shared hash while holding a reference to a key from
said shared hash then there is no guarantee for how long the reference
is valid (given a multi-thread environment).
Pick-to: 6.2
Change-Id: Ifb610753d24faca63e2c0eb8836c78d55a229001
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
We expect to produce all-bits-set in the combined OR'ed value of the
seed, so instead of counting how many bits got set and reporting that,
simply compare to -1 and count how long it took to get that far.
To make sure, I've increased the number of iterations by 50%.
Change-Id: I89446ea06b5742efb194fffd16ba37b2d93c19ef
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QHashSeed is not a random number generator (though it uses one). It
returns the same value over and over again unless you reset it to a new,
random seed.
Fixes: QTBUG-98480
Change-Id: I89446ea06b5742efb194fffd16ba36601f08d794
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We have some special handling in qt_windows.h,
use it instead of the original windows.h
Change-Id: I12fa45b09d3f2aad355573dce45861d7d28e1d77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore] Added QtFuture::whenAll() and QtFuture::whenAny()
functions, returning a QFuture that becomes ready when all or any of the
supplied futures complete.
Task-number: QTBUG-86714
Change-Id: I2bb7dbb4cdc4f79a7a4fd494142df6a0f93a2b39
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Extract the definition of q20::ssize() from tst_qanystringview.cpp,
where it had to be placed for its backport to 6.2.
Change-Id: I3f758c98a4b1efd453f4fc044b8d3f1a89de62d1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
At least one OS (QNX) can't dlopen() a library that is still
open for writing elsewhere
Pick-to: 6.2
Change-Id: I2d4425d8c69162cdfa43c2523c7459def7839eb9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Need to use QConcatenable<>::ConvertTo for SFINAE, the forwarded type
alias in QStringBuilder itself doesn't work.
[ChangeLog][QtCore][QAnyStringView/QStringBuilder] Implicit conversion
from QStringBuilder to QAnyStringView now works as advertised.
Pick-to: 6.2
Fixes: QTBUG-98138
Change-Id: I1c300675cf43b13017bc56398ae5d8c1c51e64fe
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QObjects must be deleted if the QCoreApplication is being destroyed.
This was previously done by implementing custom code in qtbase and
other modules. So unify it and introduce a Q_APPLICATION_STATIC,
based on the Q_GLOBAL_STATIC, which centralises the logic.
Since we still have a few remaining living QObjects,
this comes in handy to fix those as well.
Task-number: QTBUG-84234
Change-Id: I3040a2280ff56291f2b1c39948c06a23597865c4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The relevant MS system calls (say they) don't support date formatting
for years < 1601 (but apparently do in fact) and the year field of the
data structure is unsigned, so can't support years < 0. As a result,
the windows back-end for QSystemLocale failed for negative years.
So replace year < 1601 with a place-holder and substitute after
formatting.
Added new tests (based loosely on one in qtdeclarative that failed) to
verify that this actually works. These reveal that macOS also fails to
handle negative years; marked as expected failure there pending a fix.
Change-Id: I9b63cefd5f0b77a39cf1238549412de3e26ca1bd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reduce overhead for including qguiapplication.h by splitting
up qnativeinterface.h into a public and a private part.
[ChangeLog][Potentially Source-Incompatible Changes] The
qguiapplication.h header no longer implicitly includes
qloggingcategory.h. If your code depends on the transitive
include, explicitly include <QLoggingCategory> where needed.
Pick-to: 6.2
Task-number: QTBUG-97601
Change-Id: Ic02327a1c3092e21730160af5c59a9d58dc1239c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The source was already protected, but the destination wasn't.
Pick-to: 6.2
Change-Id: I300f19c3e65abd8bc1eef4309aefa11852d1c049
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In case the class doens't have a default constructor, checking for
object.isValid() will give false because the object won't be created,
however, the class could still be loaded and we could have a valid
jclass.
Pick-to: 6.2
Fixes: QTBUG-96069
Change-Id: I8d59e26d9d7c0e8e363ce443937091a374a24473
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This lets it avoid a two-digit year that would clash with month or day.
That shall make fixing up system locale date formatting run cleaner.
Add a test for QGregorianCalendar's two extensions.
Change-Id: I77083ff9d5e4035763250904a59fcf416286545b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change allows canceling the chain of continuations attached to a
future through canceling the future itself at any point of execution of
the chain.
[ChangeLog][QtCore][Important Behavior Changes] The chain of
continuations attached to a future now can be cancelled through
cancelling the future itself at any point of the execution of the chain,
as it was documented. Previously canceling the future would cancel the
chain only if it was done before the chain starts executing, otherwise
the cancellation would be ignored. Now the part of the chain that wasn't
started at the moment of cancellation will be canceled.
Task-number: QTBUG-97582
Change-Id: I4c3b3c68e34d3a044243ac9a7a9ed3c38b7cb02e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Adding new entries to QOperatingSystemVersion in patch releases
was previously breaking our BC guarantees because the entries are
exported, thus users cannot freely switch between different
patch-releases without a recompile if they adopted the new entries.
Move the data itself to a base class so that the entries can be
constructed inline.
Task-number: QTBUG-97808
Change-Id: Ic44f07488af8a04a3bedc10bebb740c4d68f43f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMultiHash::operator== crashes when comparing two unequal objects.
This patch fixes it.
Pick-to: 6.2
Fixes: QTBUG-98265
Change-Id: Ibf9fef3372a2b4581843be5f25e65cc9a55ef64d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Explain why QSystemLocale needs to be an export. Unexport
QLocaleId::fromName() now that qttools no longer uses it.
QLocalePrivate was only Q_CORE_EXPORT for the sake of one use in
tst_QLocale, that can now be replaced by a call to a public QLocale
method.
Change-Id: I1efe8ee03488acfc6e1c36661f6e956a86e191c3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Tests of QTimeZone::dispayName() were burying most of what was
interesting in the variations among them by repetition of a large
amount of boilerplate. Package the repetition in a macro so that
the differences between checks are more evident.
Change-Id: I23bcafab641b7d3bed50248ba5313250c150d30c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MSVC 2022 (17.0.0) complains about "'QString::replace':
12 overloads have no legal conversion for 'this' pointer".
This is a compiler bug. It is reported to MS. Still we workaround
it here so that qtbase can be built with MSVC 2022.
Pick-to: 6.2
Task-number: QTBUG-96975
Change-Id: I0180e2e6760d2809ca61e3cd8f02b04f970172a7
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
And bump NTDDI_VERSION to 0x0A00000B (NTDDI_WIN10_CO) at the same time,
to unblock the developers from accessing the latest Windows APIs.
Pick-to: 6.2
Change-Id: Ifbc28c8f8b073866871685c020301f5f20dc9591
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Stop turning THAI CHARACTER SARA AM into a grapheme boundary because it
breaks a test and chromium does not consider it to be a separate
grapheme.
Fixes: QTBUG-88545
Change-Id: Ib1aea8dbb66ac42b2129cf9fe04c39f5f76eeb36
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update tst_qlocale to take into account "narrow" day representation
change for Russian locales. This version of CLDR changes narrow forms
to one letter. Previously those forms were identical to short forms
(two letter). The new representation is consistent with other languages
and so does not appear to be a bug.
Fixes: QTBUG-94358
Pick-to: 6.2
Change-Id: I9724c281a250685da8232e5c05c9c375a8c79253
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use the Q_INT64_C() macro and qint64()-as-function instead of C-style
casts.
Change-Id: I9d169715da96a49898e9c9e2a6d3ee5182e1d91c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Where std::numeric_limits<...>::min() is used used as invalid value
for an API return, save it as a named constant so that the comparisons
are against an informative name, rather than leaving the reader to
guess the significance of the min-value.
Change-Id: Ia99c75e21856f65cb4494120d05eed36f5fc2d50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation for QProcessEnvironment's default constructor
says:
This constructor creates an empty environment. If set on a
QProcess, this will cause the current environment variables
to be removed.
This is not the case however, because setting such an environment
for a process is equivalent to not setting an environment at all
and the child process is executed with parent's environment.
It is still possible starting from Qt 6.2.0 to create an empty
environment by adding a variable to a null environment and removing
it, but that's cumbersome, and the comparison operator says that
it is equal to the null environment but it is obviously behaving in
a different way.
This change adds an additional constructor to QProcessEnvironment
that can be used to construct a null environment, and changes the
default constructor to produce an empty environment. The comparison
operator is changed to correctly distinguish between such objects.
This is a behavior change, but the current behavior is broken
and this is unlikely to affect working code.
[ChangeLog][QtCore][QProcessEnvironment] An additional constructor
was added to explicitly create an object that when set on QProcess
would cause it to inherit the environment from parent (this was
formerly the behavior of a default-constructed QProcessEnvironment,
which will now (as documented) actually give a process an environment
with no variables set). A new method inheritsFromParent() was added
to test for such objects.
Fixes: QTBUG-58053
Change-Id: I15e20c6a5f01ebe2c736d5578c75dba1ee319320
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Indetnation was bad in commit 0ab3c5c250
and was missed in code review and one comment wasn't updated when the
code was.
Take the opportunity to remove an old TODO that has been completed for
years.
Change-Id: Ice04365c72984d07a64dfffd16b4899604513680
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Don't rely on transitive include from qobject.h, which will go away.
Change-Id: I99dd97ff4fb1d0632d040daab0bffa2d7b85d3ae
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Clang aligns the object at 32-byte boundaries even though we
specifically asked for alignof(void*), so tell it not to sanitize the
address of the plugin object. Tested with Clang 12 and 13.
GCC seems not to be affected, even when ASan is enabled.
If this doesn't work, we may need to accept reading a note that is
improperly aligned. I don't think the output will be actually a correct
note because the intra-note alignment will be wrong (I carefully chose
the ELF note name so it would not require alignment, but that's only
valid up to 8-byte alignments).
Fixes: QTBUG-97941
Change-Id: Ice04365c72984d07a64dfffd16b422fe074d8a70
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since QByteArray/QByteArrayView don't overload nicely, we need to make
the existing QByteArray overload a Q_WEAK_OVERLOAD (= a template) as a
tie breaker. This automatically prefers the QByteArrayView version
over the QByteArray overload, transparently optimizing existing users
passing char string literals to avoid the implicit creation of a
QByteArray just for passing the separator.
None of our modules exports a subclass of QByteArrayList, so turning
join(QByteArray) into a function template should be ok.
[ChangeLog][QtCore][QByteArrayList] Added join(QByteArrayView)
overload.
Change-Id: I090671d9b94c30b63a986f17e966d124c22b5c54
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Beats a manual array with too wide strings. I thought even to simply
replace this with a switch (loc)... it's not like this is
performance-critical code, given it uses QString.
Change-Id: I2bbf422288924c198645fffd16a977778ff8d52d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove at() and chmod() methods of MyEngine class. Those methods
are not used anywhere and look like remainder of old API to me.
Change-Id: I754a4281124cb8c9d74e79a9a2b99fb1b1f41e52
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove useless overrides of QAbstractFileEngine methods from the derived
classes. Also remove "This virtual function must be reimplemented by
all subclasses" passages from the QAbstractFileEngine's documentation.
There are pure virtual methods for such use cases. QAbstractFileEngine
already contains useful defaults for classes not supporting all the
functionality.
Change-Id: Ia25965854f3809b15d7502da3749cc2f3414bbc3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Ivan Solovev
Marc Mutz
Tatiana Borisova
Giuseppe D'Angelo
Sona Kurazyan
Kai Köhne
Edward Welbourne
Ulf Hermann
Thiago Macieira
Alex Trotsenko
Volker Hilsheimer
Joerg Bornemann
Robert Löhning
Mårten Nordheim
Jeremie Graulle
Lars Knoll
Andreas Buhr
Pasi Petäjäjärvi
Ievgenii Meshcheriakov
Janne Juntunen
Oliver Wolff
Luca Beldi
Fabian Kosmale
Yuhang Zhao
Mike Achtelik
Assam Boudjelthia
Andreas Buhr
Øystein Heskestad