Not all test cases inspect all of failed, then, and canceled, but it
doesn't hurt to always collect all three.
Avoids having to write the same type of code over and over again.
Amends bf3fc5c95c (but really
1f22fc995a and
855c448469, which each duplicated the
initial pattern without refactoring).
Pick-to: 6.5 6.2
Change-Id: Ifb2a3589f8aed9017fbdff20e4edb64e8c9e2488
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
(cherry picked from commit 9d0da873f0ddadb60e61fbd6c96c8b00f026e99f)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
In unit-tests, blocking operations should be timed, whenever possible,
so that a proper failure is logged instead of a watchdog timeout
(which is reported as a crash).
Wait for 60s and wrap the wait() in QVERIFY(). Since this can fail,
mark ThreadWrapper's dtor as non-noexcept.
Amends 385f0732d9.
Pick-to: 6.5 6.2
Change-Id: I3462017cb1a7580c901b98e9b1c3741853f32dc6
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
(cherry picked from commit 32d12c2ebace41361c789e5aa58430ebf9f687b1)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Amends 7a7f2547f3, which added the triplet
including the script before the language_Territory name without it. The
truncate-from-the-end algorithm in QTranslator ended up trying the pure
language first, and - if found - ignored any more specific territory-
variant that might be present.
To fix this, replace the truncate-from-the-end algorithm when we try
to find files, and instead create a comprehensive list of fallbacks,
avoiding duplicates as we go along. Insert those fallbacks right after
their base-entry. We then try to find files for each entry, with and
without the prefix.
This fix is needed only in 6.8 and 6.5; from 6.9 onwards, the change to
QLocale::uiLanguages in 84afaafc9c6968dd76fcadc5392065d340543521 fixes
this on the correct level, making kludges in QTranslator unnecessary.
As a drive-by, replace int indices in for-loops with qsizetype.
Fixes: QTBUG-124898
Pick-to: 6.5
Change-Id: Ia3deceb4ed2c6ef5ca0a815cc7b8878bf29ef088
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When Q_PROPERTY is used to define a property with type (for example)
Qt::Alignment the name of the type stored in the meta-object is
"Qt::Alignment".
When QMetaObjectBuilder.addProperty() is used it will instead use the
name of the meta-type (ie. "QFlags<Qt::AlignmentFlag>") which it has
obtained from QMetaType::fromName("Qt::Alignment").name().
In the QMetaProperty ctor it tries to resolve the QMetaEnum for the
property and uses the internal parse_scope() to extract the scope and
qualified key from the name. However it does not handle template names
and so fails with dynamically created properties.
This change to parse_scope() removes the "QFlags<>" so that the
template type can then be parsed.
Another solution would be for addProperty() to always use the type name
it was given rather than use QMetaType::fromName(). That has the
advantage that the layout of the dynamic meta-object would match that
generated by moc.
Change-Id: Iac9e2db2f134029709158b4e500286922396501d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 5624060865e3ccd3c487f10355cb740b7322f93c)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Need to enable element_type unconditionally, to direct the default
std::pointer_traits::to_address to fall back to operator->().
[ChangeLog][QtCore][QList] Fixed std::to_address() on QList::iterator
on older compilers.
Fixes: QTBUG-130643
Change-Id: I521f327933c51ca87c511a7741b2dce65094032b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
(cherry picked from commit b8c879f273533d87f52dbc8e9d2f9b3b3566cd60)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
If a class has an opt-in, the test should test both.
Pick-to: 6.5 6.2
Change-Id: I3b200a2f8e96c62b0c38ae735cb9f7e6786375b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit c198a67bfb3fea21ec06f72ea08107c4da6e88f7)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Like QString, QChar also changes API when said macro is defined.
So, like tst_QString from 8420d3e0b2
onwards, also compile tst_QChar under it, separately.
Pick-to: 6.5
Change-Id: I81d25d5bfae78b1a11d47e49aa618d079c4b09b7
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 167b04aac89488a5f2005bd1f4dfde354f43c6a6)
As usual, when making a change, we find out that test coverage was
poor. Add such tests for QChar ctors.
Amends (should have been a prequel commit of)
9ef4c123c39c642357c9e8530d59f32f220a7824.
Conflict resolution for 6.8:
- adjusted static_asserts to old QChar ctor overload set
Pick-to: 6.5 6.2 5.15
Change-Id: Idcd9ab816ef815ce4a85dba1f7e37201b64c2203
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
(cherry picked from commit 69190a370d1e9f60c78f3096df62a61b6a5d1384)
Document the limited range of datetimes that can be parsed from
strings and the (awkward) consequence of the range bounds being
specified in local time.
Add tests for UTC hitting those bounds and QEXPECT_FAIL() the ones
that (as the new docs say they may) fail. Technically the fact that
the UTC:min one *doesn't* fail is evidence of a bug in the existing
date-time parser. Its replacement should support unbounded parsing.
Pick to 6.8 required removing a QEXPECT_FAIL() specific (on MS) to the
std::chrono::tzdb backend, which isn't present before 6.9.
Fixes: QTBUG-129287
Task-number: QTBUG-77948
Pick-to: 6.5
Change-Id: Ic90558f1a06a62f7d0a947e37802370d1ab4e373
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 3e25203d4d5ba428309e972367dbdf99c4e70327)
This brings back and adapted version of the sorting code that was
removed by commit 15f753ca5a60b5273d243f528978e25c28a9b56d. The issue,
as shown in the test, is that we store data1, data2, and data3 as
native-endian integers, so the bitcasts in the new code cause them to
become mangled in little-endian platforms.
Since this is a weird behavior and we'll be changing the sorting order
in Qt 7 anyway, I've left a warning for us to think about it at the
time.
[ChangeLog][QtCore][QUuid] Fixed a regression that caused QUuid sorting
order to change for some UUIDs, compared to Qt 6.7 and earlier versions.
Fixes: QTBUG-130155
Change-Id: I5eeb7b36bfc5ed7218e1fffd6a773c582ad0f6f4
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
(cherry picked from commit 222891d0b6b84bbf995bd75420bdfb55292c0901)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
It was kept so as not to break compilation of user code (overriding a
function that doesn't exist in the base class). But as Marcus Tillmanns
pointed out in a qtcreator code review, it can't work because
QDirListing calls the virutal
engine->beginEntryList(QDirListing::IteratorFlags).
Removing beginEntryList(QDir::Filters) and getting a compile-timer error
is better than the code failing silently in user code (all sub-classes
of QAbstractFileEngine in qtbase have been already ported).
QDir::entryList() isn't affected because it calls
QAbstractFileEngine::entryList() which has an overload that works with
QDir::Filters.
Change-Id: I3cb18402f602ac78a6b29be57e59febb2b9db7c0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 4fecfcc867f8215defaa40b50f0340654a36b4c7)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
When a timer gets unregistered there is a chance that a new timer is
registered again immediately and gets the same ID.
On Windows this is a problem because there may be WM_TIMER messages
remaining in the native event loop that have not been processed.
This may result in unexpected timeouts for newly started timers.
By not masking away the serial/generation from the ID we generate
we will no longer return the same ID that was just freed.
While QFreeList mostly was prepared to be used in this way, one function
was not, and the tests were written with the assumption that the serial
was masked out. So this patch also addresses that.
Fixes: QTBUG-124496
Pick-to: 6.7 6.5
Change-Id: If6784815bfa41e497cbc4e00bef51da3ded5f255
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jøger Hansegård <joger.hansegard@qt.io>
(cherry picked from commit 21e9875d62414306fde9738ab255e55f22d1c8ed)
The typical use-case is calling hasNext() first before using next, but
the API docs say that calling next() even when hasNext() is false,
should just return an empty string.
[ChangeLog][QtCore][QDirIterator] Fixed a crash that happened if you
called next() after hasNext() had already returned false. Ideally you
should never call next() without first calling hasNext() as that could
lead to unexpected results (for example, infinite loops).
Fixes: QTBUG-130142
Change-Id: If0a8b1fe7dbd13b45793409a7a241e53c7257f24
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit c7691842f743f568a073582c8f0cacd6ee188f98)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Two examples were given, one to show "invalid" usage that would, in
fact, work now - producing a date in 2012 - and the other to show
"correct" code which, while correctly delivering the date in 1912 its
author appears to have meant (albeit, giving a four-digit year would
have made that clearer), uses the string API where code should
normally construct dates - much more efficiently - by just passing the
numbers to suitable constructors.
Add tests verifying that the two date-times from the out-of-date
examples do in fact work, even if you tell them the wrong century as
default for two-digit dates.
Pick-to: 6.7 6.5
Change-Id: I8155af019c80729323ba3958fe3942a72bfefc22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 82d85c16d912b25bfa5b0a081e515fcecda1f975)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
It's supposed to indicate a thread never expires, but following
a change where it stores the expiry with chrono we no longer considered
a negative expiry as 'forever', but rather it immediately expires!
More directly it is because we end up calling
QDeadlineTimer::setPreciseRemainingTime(0 secs, X nsecs), and it only
cares about negative seconds to set Forever. There are complications to
consider nsecs for this since several nanoseconds may pass between
initially calling the function and assigning the values...
Amends 1f2a230b89.
Fixes: QTBUG-129898
Change-Id: I9626de31810fb2751ff6d83165d7dce5258a9baf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit c57027199996d0f0d2ac8ebc4505c78afa54ab5a)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
In tst_qlocale.cpp there was a #include that caused the static data
tables to be duplicated, violating ODR. All it actually needed was the
ability to iterate all rows of the locale_data[] table, so export a
method to do that from QLocaleData and have the test run that instead
of pulling in a second copy of the tables.
Conflict resolution at 6.8 needed the declaration of locale_data_size
moved up qlocale.cpp, which happened after 6.8 as part of other work
that isn't included in 6.8.
Pick-to: 6.5 6.2
Task-number: QTBUG-128930
Change-Id: Ie5ebdf508a622eeca93f8785bc09b086502aa0e2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 96c07655c46afdd3e2da7ef7d339b518d36c83c5)
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Add test coverage for the bug reported in QTBUG-124898 with
QEXPECT_FAIL to document the failure in our truncation logic in
QTranslator.
The attempted fix in 9a11273b745a30cebb5cd648c89eb224e9704492 then
introduced QTBUG-129434, as we ignored the order of languages reported
by the system locale. Add a test case for that, and use a QSystemLocale
subclass inspired by the QLocale unit test to override the system locale
with a specific one that supports multiple languages for this test.
Pick-to: 6.5
Task-number: QTBUG-124898
Task-number: QTBUG-129434
Change-Id: Iaae80d29e267fd3a2d14df0e73db27ba4c58b31a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
(cherry picked from commit 1f2ab46745af12e4776695c1b1a2523ac170368e)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
We need to put metatypes in the correct place; this is especially vital
starting with Qt 6.9, given that we need it to query it to figure out
whether we have a 64bit value or not.
As a drive-by, replace some ugly casting when constructing the meta-type
array with a call to QMetaType::iface.
Change-Id: I4b1f42f974e9f7a21f6aa4c87c3f8919f6965d6e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
(cherry picked from commit d392d3b22c94f86fea50f26284bc9ac8b35f6851)
The property observer reference used during binding evaluation can
become invalidated as the container used to maintain the
the observer would invalidate the existing observers during its
resize, leading to referring to invalid memory.
Recognize that we do not need to store the observer, but only its
binding - the observer itself is not used later.
Therefore, change the PendingBindingObserverList to become a list of
QPropertyBindingPrivatePtr to avoid the issue.
Fixes: QTBUG-127596
Original-patch-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Pick-to: 6.5 6.2
Change-Id: I8c97721ca563083d6280194175f8a915dac2ff04
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
(cherry picked from commit 275202215376238bf414d5008d3c727085e58a4c)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Both APFS and HFS+ can be both case-sensitive and case-insensitive
(the default), and the mounted file system may be any other file
system than these two as well, so hard-coding to case-sensitive
is not sufficient.
Task-number: QTBUG-28246
Task-number: QTBUG-31103
Change-Id: Ibdb902df3f169b016a519f67ad5a79e6afb6aae3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 3d08816f4c4245f08a53307775fe3c4ed31a7a32)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
This reverts commit 9a11273b745a30cebb5cd648c89eb224e9704492.
Reason for revert: The fix tried to find a sensible order if
the same language is listed multiple times in QLocale::uiLanguages().
Anyhow, it breaks for lists where entirely different languages are listed. This needs more thought.
Fixes: QTBUG-129434
Pick-to: 6.7 6.5
Change-Id: I8c074cbf1ddc2ddf223ec09aef38dfc1ef7fc85f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit f3fc7b210f79e5eb427b0ff49c45c5d6d390fb34)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit a30c1bcd3c8b8eb4befeb254840224ca7bb52497)
We use pathconf in some of our tests to determine if the file system
on Darwin is case sensitive. But pathconf returns -1 if the case
sensitivity can't be determined, with errno set to ENOTSUP.
The convention in this case is to treat the file system as not being
case sensitive (as reported by NSURLVolumeSupportsCaseSensitiveNamesKey
and VOL_CAP_FMT_CASE_SENSITIVE in equivalent APIs), so we need to check
explicitly for a return value of 1.
Change-Id: I1107e849babd8813da3b148c92494e8e35a32d36
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit bd3aabf38454087a96a17ff0130d7f5c2b2b39a9)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
QObject::disconnect does not cancel pending events. This can cause hard
to find bugs in application code, so we explicitly document and unit
test this behavior.
Task-number: QTBUG-127675
Change-Id: I5e94d60c27b9ce2dd2bceb832eb817b7eaa9cdcd
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 0681e720a9851f1873ce5a5f99b5567d2b418261)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Removing the slash would be a drastic change in behavior. We can expect
many people to rely on the trailing slash to string-append further path
segments without inserting an extra slash.
Amends commit e7bcf41c0b23d83cfb31f966454945c705589a99.
Pick-to: 6.7 6.5
Fixes: QTBUG-128940
Change-Id: I71dfc957f383e4648b3b47a40aeb796d7237fb00
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 2addfa635d2f666d18ffc818f76eb673a6c787d1)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
The logic in the isValidSegment() function was failing for 8-bit signed
because for them Integer(SegmentUnknown) is -1, so
(std::numeric_limits<Integer>::max)() < Integer(SegmentUnknown)
was always false (127 < -1) and the function would only return true on
the impossible condition of
segment >= 0 && segment < -1
Fixes: QTBUG-128848
Pick-to: 6.7 6.5
Change-Id: I8d17b93afd6c2982a099fffdcaeccf126b7a9d02
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
(cherry picked from commit ddfcc0734875cdee2c169bf2ecb1546bddba6e98)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
This removes the specializations, which were hiding the fact that signed
8-bit integers produce assertion failures.
Pick-to: 6.7 6.5
Task-number: QTBUG-128848
Change-Id: Ibb4952b0eb50a8c51e05fffd9e88a137ca95bcd8
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
(cherry picked from commit a572b4b0780dcc5fcac55737fc4153fca93e6c62)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Fortunately, isDirPath() had an extra parameter to tell us whether the
path existed in the first place, making the fix very simple.
Pick-to: 6.7 6.5
Fixes: QTBUG-128800
Change-Id: I81482f87b594933158d0fffdbea0ea2a00494b6c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
(cherry picked from commit 329b05739d5d62f37464a5714ad87e7ca05693e2)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Since qt_normalizePathSegments very often modifies the path, pass that
as pointer, and return a boolean with whether the path is attempting to
go up above the root.
Change-Id: I851fcb94db4606a6bd97fffd81910930dea8222a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
(cherry picked from commit 0314491abac092b20ebefc05e2e9f27fd038fc38)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Commit 4b1547adc9b195e6acc90471fc48dec7ee0c429d rewrote
mergePathSegments() but got one thing wrong: that ".." on a "//" should
only remove one slash, not all of them. That behavior was introduced by
commit eaf4438b35 to match what browsers
do.
QUrl will use the local file behavior if the URL scheme is "file",
unlike the browsers.
Task-number: QTBUG-120396
Pick-to: 6.8.0 6.7 6.5
Change-Id: I8a96935cf6c742259c9dfffd17e8fd3cfde46e25
Reviewed-by: David Faure <david.faure@kdab.com>
(cherry picked from commit e7bcf41c0b23d83cfb31f966454945c705589a99)
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Commit 4b1547adc9b195e6acc90471fc48dec7ee0c429d rewrote the latter for
simplicity and performance, so copy it over with intent to merging the
two together. In this copy, however, we keep the behavior introduced by
commit eaf4438b35, which made the
normalization match the behavior found in browsers, but didn't apply to
QUrl::resolved (that's the next commit)
Task-number: QTBUG-120396
Pick-to: 6.8.0 6.7 6.5
Change-Id: I2670423f6c6a5339771ffffdf15ebad46fd25cb4
Reviewed-by: David Faure <david.faure@kdab.com>
(cherry picked from commit 78e2d24752d8b6652aac89d1e79f245bc88281c6)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
We were overwriting the normalization if RemoveFilename was used.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused QUrl::toString(),
QUrl::toEncoded() and QUrl::adjusted() to ignore
QUrl::NormalizePathSegments if QUrl::RemoveFilename was set.
Fixes: QTBUG-127711
Pick-to: 6.7 6.5 6.2 5.15
Change-Id: I8a96935cf6c742259c9dfffd17e8e1f7fec44cb6
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
(cherry picked from commit c9ff625865c355fb57c824b13f3cb4b26e53fbe7)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
That allows the code to run in C++17 mode - at the expense of
significantly worse compile time error messages, potentially worse
compilation speed and harder to read code.
Adjust the test type to actually model
detail::is_equality_comparable_with (which requires all four
relational operators even in C++17).
As a drive-by, fix the return value of remove() from auto to bool.
Done-with: Marc Mutz <marc.mutz@qt.io>
Fixes: QTBUG-128470
Change-Id: I68df26db579c60812a18e09b76dd5712e73ccaa2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 7fe3cee36352c74cbaaff52e863bd0da1170affa)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
tst_qfloat16::ordering tests that qfloat16 can be compared with a long
double. When on x86_64, conversion from qfloat16 to long double leads to
a linker error due to undefined reference to __extendhfxf2. This is a
bug in the VxWorks' toolchain. It has been acknowledged by WindRiver and
it's being tracked in ticket 00154117.
Since
- this is a platform problem and Qt has no control over it,
- the conversion won't work for any client code anyway, so not testing it
is not hiding any issues,
mitigate the problem for now by not compiling the problematic test code
on VxWorks.
Task-number: QTBUG-115777
Change-Id: Icf81da405d1392ae3bcacc61745a54d68b849b89
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 6ef631c7992cc81ead158c5c5801f689b21fc378)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Fixes a build problem on VxWorks because their runtime library isn't
libgcc.a and is thus missing the symbols that the Clang emits into the
test code when the intrinsic is used. This also better aligns the CPU
check with what QtCore does.
Drive-by add a comment explaining what this is and why Darwin is
excluded.
Drive-by clean up of the CMakeLists.txt, especially the no-ops.
Task-number: QTBUG-115777
Change-Id: Ib15e33ce157f7e6d99d0530076de6a1024733ed6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 5f522947878690bf7b99ff4b39a6cbaa259b74b1)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Follow the dynamicCast/dynamic_pointer_cast implementation for
objectCast/object_pointer_cast since a qobject_cast can fail
just like a dynamic dast.
Also see: https://eel.is/c++draft/util.smartptr.shared.cast#6.2
See commit this commit from 2013 for more historical context:
a094bf5a89
Pick-to: 6.7 6.5
Change-Id: I9a54af55a7a1cf106cace52e9cf3bc103ae0bd42
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 7a65abb50eb638de445e24c2746d7f90c1b89f06)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
We do have an implicit constructor which allows construction of a
QLocale from the QLocale::Language enum values. It will be used when
doing the comparison.
However, do not rely on the implicit conversions, and provide the
operators that explicitly do the right thing. This also allows us to
save an extra allocation of QLocalePrivate.
Found in Qt 6.8 API review.
Amends 71bbc35a37.
As a drive-by: fix the order of the test slots in the unit test.
Change-Id: I37f8f5881469b7734705e06e471746814dd2ddf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 403b1abcad5f437c51dfabd7095b814e99e197a1)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
This simplifies the implementation, and is more secure, because you no
longer can compare const_iterator with const_iterator and get a
non-sensical result (unequal, even though copies of each other).
Requires the STL algorithm test to be ported to C++20 ranges, because
classical STL algorithms can't deal with decltype(first) !=
decltype(last).
Found in API-review.
As a drive-by, make the reversed and inverted operators conditional on
!__cpp_impl_three_way_comparison.
Change-Id: Icd0e4dac277bd3b053f7b648f8c3f9d9f3753299
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
(cherry picked from commit 2569ca0f34fe15a2e5c828b708f1406be8d53836)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
This reverts commit 521e091bca1764d53ac06bb60707475d1032f5d5.
Reason for revert: The fix doesn't work with MSVC2022 compiler and block windows-11_23H2-msvc2022-developer-build integration. Need time to find proper solution.
Task-number: QTBUG-128498
Change-Id: Id938fa2119c7e4c053398b2a3693f3128e53f734
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
(cherry picked from commit 1017a0eaf1f9fd9cc37189f73840d85bf4a5664c)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Make sure this works as it should. The bug report/support request wants
to have a String[] parameter on the Java side, but then the C++ side can
not use jobjectArray (as that has "[Ljava/lang/Object;" as signature),
so use Object[] instead (which is one solution; the other is to use
QList<jstring> or (in 6.8) QStringList on the C++ side.
What's easy to miss is that the jobjectArray that we get is a local ref,
so we have to extend its lifetime by creating a QJniObject holding it as
a global reference. We can then create a QJniArray from that QJniObject
(without any type safety).
Task-number: QTBUG-128456
Change-Id: I1e03b811165f9bc5106324d39fb58114ee8cf398
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
(cherry picked from commit f9fd5870f7379103005839bc03543bb8f6da94c3)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Container::max_size() is a _non-static_ member function in the STL, so
we can't call it as C::max_size(). Instead, use the newly-added,
Qt-style camel-case maxSize(), which we will keep static constexpr.
Task-number: QTBUG-128450
Change-Id: I839df90a91cced85f000c7d2744ba547f629ed98
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
(cherry picked from commit 6c15f99853c4cecd9285e189a441392a397b0f82)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
They match what QTimer already provides these days, and we want to
minimize porting for users come Qt 7, so we don't want users to first
write QChronoTimer::singleShot() (because it exists) and then back to
QTimer::singleShot(); we want them to continue to use QTimer.
The only reason QChronoTimer is a separate class from QTimer is that
the latter has an int interval property and we can't just port it to
milli- or nanoseconds chrono types if we want users to actually access
the extra range or precision afforded by the chrono types. But that's
not an issue for the singleShot() static methods, as they never return
an object that could be asked for its timeout.
(No ChangeLog needed, as QChronoTimer is new in 6.8)
Found in API-review.
Fixes: QTBUG-128426
Change-Id: Ief8b7c8d25380c0e9e9c5c36c90ce34c147557ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 6e5eb082c934cb94c45f3e13b3f7c2deb2e7b2e6)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Add the tests for the (move-)constructors and move-assignment.
Change-Id: I795a314a0e6d1795006fe152397eb6d9eeb3c712
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
(cherry picked from commit b6466275c27f9ec4ec8b09641e203f7afef3f7e5)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
This patch updates the tika-mimetypes.xml MIME types definition file to
version 5ea8bbf1644a593ed22ee5c7608ba33aff949d5d, which is currently the
latest on main.
The reason for the change is to include audio/aac as an alias for the
deprecated audio/x-aac MIME type, which is useful in QtMultimedia to
determine the file extension for AAC media files.
In addition, the update adds the application/x-java-keystore MIME type,
similar to the one in the old freedesktop.org.xml MIME type definition.
[ChangeLog][Third-Party Code] Updated TIKA MIME types definition file to
add the audio/aac and application/x-java-keystore MIME types.
Pick-to: 6.7 6.5
Change-Id: I14fa331c5c57e4fae8f8b31880dc66d6ca559f62
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
(cherry picked from commit 5774aa2560b65a67e72f98cf2f776325b6760950)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Marc Mutz
Volker Hilsheimer
Phil Thompson
Thiago Macieira
Edward Welbourne
Ahmad Samir
Mårten Nordheim
Fabian Kosmale
Santhosh Kumar
Tor Arne Vestbø
Kai Köhne
Tim Blechmann
Soheil Armin
Ulf Hermann
David Faure
Łukasz Matysiak
Milian Wolff
Ivan Solovev
Tatiana Borisova
Jøger Hansegård