Explicitly add QPointF vs QPoint comparison. Previously such
comparison was implicitly converting QPoint to QPointF, and
doing the fuzzy comparison. We have to keep the old behavior to
avoid breaking user code, so explicitly use fuzzy comparison in
the new operators.
As a drive-by: move the friend functions into the private section,
so that they are actually hidden friends.
Task-number: QTBUG-120308
Change-Id: I471a890b8332455e8b2dc1b99e5fba4ada168a30
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
Functional fix will come later via separate tasks.
Task-number: QTBUG-122999
Change-Id: Ib805740c87ff21cea5a186add71cc594ab4d4df1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... mirroring the same change in QLatin1StringMatcher.
Task-number: QTBUG-117054
Change-Id: I8d1f4ed01ee75a51e3d99a165dbb35ae7dae5886
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Replace class operators operator==(), operator!=() of
QFuture::const_iterator: to friend method comparesEqual() and
Q_DECLARE_EQUALITY_COMPARABLE macro.
Task-number: QTBUG-120304
Change-Id: Ifa264b83f4d5623db99820847ab9a800cca99be2
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
We need it to run after all the thread-local destructors have run, to
ensure that some user code hasn't run after QThreadPrivate::finish() has
finished. We achieve that by making it get called from a thread-local
destructor itself, in the form of a qScopeGuard.
This ought to have been done since C++11 thread_local with non-trivial
destructors became available. However, it only started showing up after
commit 4a93285b16 began using thread_local
inside Qt itself. The visible symptom was that QThreadPrivate::finish()
had already destroyed the thread's event dispatcher, but some user code
ran later and expected it to still exist (or, worse, recreated it, via
QEventLoop → QThreadData::ensureEventDispatcher).
Fixes: QTBUG-117996
Pick-to: 6.7
Change-Id: I8f3ce163ccc5408cac39fffd178d682e5bfa6955
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This function is not available in VxWorks libraries and it is not
mandatory for proper qstorageinfo test execution.
Pick-to: 6.7
Task-number: QTBUG-115777
Change-Id: Ic503c776002087d461c32f890795c27be4b1ca34
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So we test both the mmap()ed and non-mmap()ed versions. Will be
important in the next commit.
Change-Id: I6979d02a7395405cbf23fffd17c98f0e207477e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This separates the large slabs of data (and their documentation) from
the code that mixes them with CLDR-derived data and generates the data
we actually use. In the process, put the shorter table before the
longer one, to make it less likely that folk shall fail to notice it's
even there at all.
Change-Id: I8457741911657dac0dad53c2e65b977821bb4e71
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Many users (albeit mostly in qtdeclarative) of failOnWarning() are
passing a catch-all regexp, which is only supported when regular
expression support is enabled. Make their lives easier and those
checks independent of the feature by adding a third overload, taking
no parameter, that fails on any (unanticipated) warning.
Implementation is trivial - just put a null QVariant in
failOnWarningList; it won't match either check on the entry that might
exempt a test from failing on a warning, so any warning at all will
trigger failure.
[ChangeLog][QtTest] QTest::failOnWarning() now has a no-parameter
overload to support the common case of fail-on-any-warning, without
needing to construct a match-everything regular expression.
Change-Id: Ic693f1c8619fd6e495543b85737d566134cf9d20
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Test more scenarios, like separate namespaces, free enums, etc.
And test that the enumerator() function returns a valid QMetaEnum when
expected.
Change-Id: Ie4fa816ffb66d6b6e1b4c7c50674c31eddbd642e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Now developer build tests compile, but some are not working.
Functional fix will come later via separate tasks.
Task-number: QTBUG-122999
Change-Id: I70487b46c1b32ba4279cb02a4978e4f55ac0d310
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also log if the entries does not exist in the filesystem
Change-Id: Id7d4dec1610af13869e645cf96b5bf6a1e26b956
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Replace class operators operator==(), operator!=() of
QRegularExpression to friend method comparesEqual() and
Q_DECLARE_EQUALITY_COMPARABLE macro.
Use QT_CORE_REMOVED_SINCE and removed_api.cpp to get rid of
current comparison methods and replace them with a friend.
Task-number: QTBUG-120304
Change-Id: Ib6fc83d29ad9bc710c2fdf32a3d60131fbf298b6
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Run qlogging_helper at relative working directory because
CMAKE_CURRENT_BINARY_DIR is not valid when test is run after
installed from package to target.
Task-number: QTBUG-118680
Change-Id: Ifd46d05562006ad4adf17517fae30ca5c63bc157
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, it's impossible to select those rows in the command-line,
because they start with a colon.
Change-Id: I6979d02a7395405cbf23fffd17c98f455a4cbdaa
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The documentation says:
The mapping will have the same open mode as the file (read and/or
write), except when using MapPrivateOption, in which case it is always
possible to write to the mapped memory.
So obey it.
This may cause high memory use by copying data we already have. This may
be important because applications may want to memory-map resources which
they intentionally didn't compress because those resources are
large. Later commits will implement some workarounds.
Fixes: QTBUG-124608
Pick-to: 6.7 6.6 6.5
Change-Id: I6979d02a7395405cbf23fffd17c8f03baf0ec00d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace public friend operators operator==(), operator!=() of
QLocale to friend method comparesEqual() and
Q_DECLARE_EQUALITY_COMPARABLE macro.
Task-number: QTBUG-120304
Change-Id: I759ef08269abe3b40e0dce3fd408a86cc3f34857
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Replace class operators operator==(), operator!=() of
QMimeType to friend method comparesEqual() and
Q_DECLARE_EQUALITY_COMPARABLE macro.
Use QT_CORE_REMOVED_SINCE and removed_api.cpp to get rid of
current comparison methods and replace them with a friend.
Task-number: QTBUG-120304
Change-Id: I9776e98c8a3b14d599733c91af61fbc12b1f0e57
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Replace public friend operators operator==(), operator!=() of
QMetaMethod to friend method comparesEqual() and
Q_DECLARE_EQUALITY_COMPARABLE macro.
Task-number: QTBUG-120304
Change-Id: Idb3f880a1db4850d73a58ed37f8cbd3454dd5ea2
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Replace public friend operators operator==(), operator!=() of
QMetaSequence and QMetaAssociation
classes to friend methods comparesEqual() and
Q_DECLARE_EQUALITY_COMPARABLE macroses.
Task-number: QTBUG-120304
Change-Id: I88e9b228220d36092437bfb71ae2f053d2e99fdf
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
By this change, sort(any_negative_number) will stay unchanged, and it
unsorts the model so that the order will be the same as the source
model.
But when the second argument of the sort is set to DescendingOrder
deliberately, the result will be the same as the source model, but in
reverse order.
[ChangeLog][QTCore][QSortFilterProxyModel] QSortFilterProxyModel.sort
sorts the proxy by the source model index descending if the sort
column is less than zero and the order is descending.
Fixes: QTBUG-124863
Change-Id: I73f9d3b500a929efa969cf24ef3d8fe758167645
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The testThreading test was deadlocking due to waiting for
threads to start. Rewritten the wait to use a QEventLoop
Change-Id: If1a864c054c1de1239694b201a4cf0e8186fc1d0
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
The QRegularExpression capture-by-name keys are currently QStringViews,
but are only ever used to compare them against a const char16_t*, so
this API is a perfect candidate for replacing all of these overload sets
with a single QAnyStringView function.
[ChangeLog][QtCore][QRegularExpression] Keys can now be passed as
QAnyStringView (was QStringView).
Fixes: QTBUG-103097
Change-Id: I1a80e85f301cc08370d70b3b5eb0ae10c6a51f33
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Replace public friend operators operator==(), operator!=() of
QBitArray to friend method comparesEqual() and
Q_DECLARE_EQUALITY_COMPARABLE macro.
Task-number: QTBUG-120304
Change-Id: I6b47111c144016b3aa05f01c8035c32d164291ad
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
[ChangeLog][QtCore][QSaveFile] Member functions such as fileTime() and
size() now continue to work after commit().
Fixes: QTBUG-66605
Fixes: QTBUG-77039
Change-Id: I0b17eae9493911d1a0828b589d762bd8eb344bce
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows a more efficient way of checking whether a thread is the
currently executing one (without using private API).
Change-Id: I007edae6b258d7e42e901fa720d4f3cf9fe25a49
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtTest] The QCOMPARE_xx macros can now only find
QTest::toString() expansions that are either found via Argument
Dependent Lookup on the type in question or are an instatiation of the
QTest::toString<T>() template. This matches the behavior of the
QCOMPARE() macro.
This changes the way how the toString() overloads are selected, so
we need to explicilty constraint the main QTest::toString() template
in order to pick the free functions when they exist.
Change-Id: Ie28eadac333c4bcd8c08fffd17c54e768c5cffd0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Some of these would break if we changed the start(Priority) to say
start(QThread::Priority) instead.
Pick-to: 6.7 6.5 6.2
Task-number: QTBUG-124723
Change-Id: Id3ebe73718c8acbc54a2c88158f4062fd0dd5be1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 8d127c5737 refactored this code
from QByteArray::split to manually iterate over the list (and
QStringTokenizer doesn't work for QByteArray), so we missed the last
element in the iteration.
Pick-to: 6.7
Fixes: QTBUG-124580
Change-Id: I455fe22ef4ad4b2f9b01fffd17c867f6ed350af7
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
I neglected to update the CLDR dateconverter code when I expanded the
range of forms we support for display of a timezone. Even that
expanded range doesn't cover all the cases CLDR does, but we can at
least approximate each of CLDR's options by the closest we do support.
Make matching changes to how the Darwin backend for the system locale
maps its ICU-derived formats to ours.
This in practice changes all locales previously using t (abbreviation)
as zone format to use tttt (IANA ID) instead. Test data updated to
match.
[ChangeLog][QtCore][QLocale] Date-time formats now more faithfully
follow the CLDR data in handling timezones. In most cases this means
the IANA ID is used in place of the abbreviation.
Change-Id: I0276843085839ba9a7855a78922cffe285174643
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test assumes either windows or unix line endings, however
wasm can run on either system, causing problem with
git config core.autocrlf=true
Fix the test so that on wasm we correct filesize if
necessary
Change-Id: Ieb86c5388aa931d8ca06822e1c09a2c55801de67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
There was a discrepancy that the multi-arg arg() overload would accept
any number of digits in the placeholder, resolving up to value 999
(e.g., %000001 was interpreted as placeholder #1), but the single-arg
arg() overload only supported exactly one or two digits. The single-arg
behavior was documented, so use it.
[ChangeLog][Important Behavior Changes] The QString::arg() overload
taking multiple QString-like arguments is now fixed to interpret
placeholders like the other arg() overloads: it will find at most two
digits after the '%' character. That is, the sequence "%123" is now
interpreted as placeholder #12 followed by character '3' (verbatim).
Pick-to: 6.7
Fixes: QTBUG-118581
Change-Id: I455fe22ef4ad4b2f9b01fffd17c767a948d41138
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
We'd end up trying to takeFirst() from an empty QStringList.
[ChangeLog][QtCore][QProcess] Fixed a bug that would cause
startCommand() to crash if passed a string that was empty or contained
only whitespace characters.
Fixes: QTBUG-124512
Pick-to: 6.5 6.6 6.7
Change-Id: I455fe22ef4ad4b2f9b01fffd17c7689095c39272
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
There were two of it. The "year-match-*" tests have two year fields,
one four-digit the other two-digit, and deal with whether they match.
The second year-match-1999 had, however, only a "yy" year format; it
in fact belongs to the "just-yy-*" family that follows. So rename it.
Amends commit 5108192f67 which landed in
6.7.
Pick-to: 6.7
Task-number: QTBUG-107185
Change-Id: Ibfe0c33cb00dc068d0f670d27c43ec4dc4550c05
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Follow-up to commit ae6186c7e8
* require the feature in headers that should only be seen when it's
enabled,
* expose the auto-test to being run even when the feature is disabled
(the parts of that depend on the feature have needed #if-ery) and
* fix the Darwin-specific test's misguided #if-ery.
Pick-to: 6.7 6.5
Task-number: QTBUG-108199
Change-Id: I398cf44c33ffdcb4bb04f54a9d8ccfef68741e4e
Reviewed-by: Mate Barany <mate.barany@qt.io>
They're not wanted and Axivion (SV71) grumbles about the lack of copy
and move operators and constructors otherwise. Do the same in all
derived classes. Some of these needed their default constructors made
overt as a result. Similar for QAbstractFileEngineHandlerList.
Task-number: QTBUG-122619
Change-Id: Iff016940f8c4884bd65dd781354b9bcda9b7cdd8
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
When a date string contains day of the week, day of the month, month
and two-digit year, it was still possible to get a conflicting result
in the default century instead of a consistent result in the next (in
fact present) century.
The actual logic needed to get the right year has to take into account
all date fields. This is all worked out already in actualDate(), so
delegate to it instead of trying to make do with just the year info.
Pick-to: 6.7 6.6 6.5
Fixes: QTBUG-123579
Change-Id: Id057128d8a0af9f3a7708d0ee173f854bb1a2a8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Dennis Oberst <dennis.oberst@qt.io>
Both qlocale_mac.mm and dateconverter.py were mapping the CLDR am/pm
indicator, 'a', to the Qt format token 'AP', forcing the indicator to
uppercase. The LDML spec [0] says:
May be upper or lowercase depending on the locale and other
options.
[0] https://www.unicode.org/reports/tr35/tr35-68/tr35-dates.html#Date_Field_Symbol_Table
We don't support the "other options" mentioned, but we can at least
(since 6.3) preserve the the locale-appropriate case, instead of
forcing upper-case. As such, this change is a follow-up to
commit 4641ff0f6a
Changes locale data, as expected, to use "Ap" in place of "AP" in
various formats in the time_format_data[] array.
[ChangeLog][QtCore][QLocale] Where CLDR specifies an am/pm indicator,
the case of the CLDR-supplied indicator is used, where previously
QLocale forced it to upper-case.
Change-Id: Iee7d55e6f3c78372659668b9798c8e24a1fa8982
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The LDML spec includes a 'b' pattern character which is like the 'a'
pattern, for AM and PM, but would rather use noon and midnight
indicators for those specific times. We don't support those and using
am/pm will be right enough of the time to be better than simply
discarding this option, if it ever gets used (which it currently
isn't), so treat as an alias for 'a'. No locale in CLDR currently uses
this.
CLDR also has a 'B' specifiers for "flexible day periods", including
things like "at night" and "in the day". At present only zh_Hant uses
'B'. As a result, this change only affects zh_Hant's formats for time
and datetime, which only zh_Hant_TW uses - zh_Hant_HK overrides them
to use am/pm markers and zh_Hant_MO inherits that from
zh_Hant_HK. Based on this and user feed-back, I've opted to treat 'B'
as another synonym of 'a'.
This removes an entry from the time_format_data[] table (it happened
to occupy one whole twelve-character row), causing many other locales'
offsets into that table to be shifted by 12. Only zh_Hant_TW has an
actual change to which entry in the table it uses.
Added a test-case.
[ChangeLog][QtCore][QLocale] CLDR's 'B' (flexible day period, e.g. "at
night" &c.) field, not currently supported, is now handled as a
synonym for the AM/PM field 'a', instead of leaving the B as literal
text. Only affects zh_TW at present.
Fixes: QTBUG-123872
Change-Id: I6ba008c0a048190bf7af8c7df7629a885b05804f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pass the pointer to the current state, not a pointer to a pointer to it.
[ChangeLog][QtCore][QStringConverter] Fixed a bug involving moved
QStringEncoder/QStringDecoder objects accessing invalid state.
Amends 122270d6be.
Done-with: Marc Mutz <marc.mutz@qt.io>
Pick-to: 6.7 6.5
Change-Id: I70d4dc00e3e0db6cad964579662bcf6d185a4c34
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We weren't doing the decoding from UTF-16 to UTF-32, so weren't catching
invalid code sequences
[ChangeLog][QtCore][QXmlStreamWriter] The class now rejects writing
UTF-8 and UTF-16 invalid input (improper code unit sequences).
Task-number: QTBUG-122241
Pick-to: 6.5 6.6 6.7
Change-Id: I83dda2d36c904517b3c0fffd17b42d17c637fdc4
Reviewed-by: Mate Barany <mate.barany@qt.io>
We were iterating over code *units* and that yielded wrong results. The
one from the bug report was simply caused by the fact that
QUtf8StringView::value_type is char, which is signed on x86, so the
expression:
*it <= u'\x1F'
was true for all non-Latin1 content.
But in attempting to fix this, I needed to do the proper UTF-8 decoding,
as otherwise we wouldn't catch non-Latin1 sequences and such.
[ChangeLog][QtCore][QXmlStreamWriter] Fixed a bug that caused the class
to fail to write UTF-8 strings with non-US-ASCII content when passed as
a QUtf8StringView.
Fixes: QTBUG-122241
Pick-to: 6.5 6.6 6.7
Change-Id: I83dda2d36c904517b3c0fffd17b42bbf09a493d0
Reviewed-by: Mate Barany <mate.barany@qt.io>
Replace public friend operators operator==() and operator!=() of
QDeadlineTimer to friend method comparesEqual().
Replace public friends operator<(),<=(),>(), etc of QDeadlineTimer to
friend method compareThreeWay().
Task-number: QTBUG-120304
Change-Id: Ib855ccac9b31b54fe28b822f2985154608fefa27
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Replace public operators operator==(), operator!=() of
QItemSelectionRange class to friend methods comparesEqual().
Use QT_CORE_REMOVED_SINCE and removed_api.cpp to get rid of current
comparison methods and replace them with a friend.
Task-number: QTBUG-120304
Change-Id: Ideff990c942d5ee1c89a93ac2081cc5d7067b23f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Also add test files for emscripten platform to build
Change-Id: Ief03e44a4e3f3339a65453469a7ae0a6969f2252
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Replace public friend operators operator==(), operator!=() of
QNativeIpcKey to friend methods comparesEqual() and
Q_DECLARE_EQUALITY_COMPARABLE macro.
Task-number: QTBUG-120304
Change-Id: If18d86fb18e44f8d2210cba7ca93e4ac478a2a48
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Replace public friend operators operator==(), operator!=() of
QKeyCombination to friend method comparesEqual() and
Q_DECLARE_EQUALITY_COMPARABLE_LITERAL_TYPE macro.
Task-number: QTBUG-120304
Change-Id: I679f3fa5fcc4c675a763cc5a5fe0e0880439a64f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
We are selecting a subset of the tests for batching/CI,
however this is done for the WASM configuration which
interferes with non-batched tests.
- we can only build and run tests which are in the
batching subset
- we are enabling threading tests which breaks the
no-thread configuration.
Add QT_BUILD_WASM_BATCHED_TESTS and enable for WASM and
batching. There's then no restrictions on which tests
can be selected for CI.
Change-Id: I59a67b63e80cd00676cb28f916951d2a52b0ee2c
Reviewed-by: Jøger Hansegård <joger.hansegard@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QVariant::toUInt() cannot convert from those two, so we always ended up
with 0, producing lots of duplicated test rows.
Pick-to: 6.7
Fixes: QTBUG-124349
Change-Id: Ie28eadac333c4bcd8c08fffd17c5a3e39a2cc3f6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We wanted to test the (min,max) of each of the two types, but one of the
four combinations wasn't correctly done.
Task-number: QTBUG-124349
Pick-to: 6.7
Change-Id: Ie28eadac333c4bcd8c08fffd17c5a3ccb4205139
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
If QFile::open() fails in any of the these helper functions, the test
should fail.
Task-number: QTBUG-123623
Change-Id: I3e4d65eccd3be32eed673d9607ef468ddc0fd6e5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Problems:
* mmap of size 0 works, add test in QFSFileEnginePrivate::map to
make sure wasm platform behaves as the other platforms
* qwe// is a valid filename on wasm, QSKIP test
* applicationFilePath does not exist on wasm.
* /dev/zero does not exist on wasm, file bug, skip test
* blocking pipes do not exist on wasm, QSKIP test
* socketpair does not exist on wasm, QSKIP test
Change-Id: I1705c543782cbcb92a7ebed2fc2792613524c686
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This amends commit 394788c68e (its
ChangeLog applies to this commit too). That fixed sorting of UTF8-to-
UTF16, but when adding more unit tests, I've discovered that some UTF-16
strings also sorted incorrectly. There were two problems:
First, we were assuming that we could rely on the UTF-16 length as a
proxy for the UTF-8 one, but that's not true for some cases:
* both 1-, 2- and 3-codepoint UTF-8 sequences are 1 codepoint
in UTF-16, so some strings would have identical UTF-16 length
* 4-codepoint UTF-8 sequences shrink to 2-codepoint UTF-16 ones
(2:1) but 3-codepoint UTF-8 sequences shrink to 1 (3:1), so
some strings would be longer in UTF-16 but shorter in UTF-8.
Second, QtPrivate::compareStrings performs UTF-16 codepoint comparisons
not Unicode character ones, so surrogate pairs were sorting before
U+E000 to U+FFFF.
To fix all of this, we need to decode the UTF-16 string into UTF-32 and
calculate the length of that in UTF-8 to be sure we have the sorting
order right.
Since this is a slight behavior change with a performance penalty, I am
choosing to backport only to 6.7. The penalty mostly does not apply to
6.8 due to commit 61556627f2.
Pick-to: 6.7
Change-Id: If1bf59ecbe014b569ba1fffd17c4c4ddcc874aac
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
In some cases calls to QFile::open are made outside of a testfunction
(so we can't use QVERIFY), or even in standalone executables that are
executed by tests. Make them fail "visibly".
Change-Id: Iec4d56f6d874be16aa2e9ad6974eeec2a98caa3f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
New comparison macros are used for following classes:
- QCborMap::Iterator
- QCborMap::ConstIterator
Replace public operators operator==(), operator!=(), operator!<(), etc
of classes to friend methods comparesEqual(), compareThreeWay();
Use *_helper methods to have an access to protected members of
QCborValueConstRef class from friend functions.
Task-number: QTBUG-120300
Change-Id: I71b6febaf3f31ea7ba668d91c375b0a7b6827d21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
New comparison macros are used for following classes:
- QJsonObject::iterator
- QJsonObject::const_iterator
Replace public operators operator==(), operator!=(), operator!<(), etc
of classes to friend methods comparesEqual(), compareThreeWay();
Use *_helper methods to have an access to protected members of
QCborValueConstRef class from friend functions.
Task-number: QTBUG-120300
Change-Id: I308e2c0a549ff186c1d6339b38e989b80dc388a3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because it causes issues in the CI
Pick-to: 6.7
Change-Id: I8cd232abf1c4ee1d9417a8bff9aa3bcf5f893e8f
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
On android documentation orientation changes are sent via
onConfigurationChanged callback. Previous implementation
based orientation detection to onSizeChanged callback.
That callback is not called when orientation turns 180 degrees.
i.e. between landscape and inverted landscape.
This fix adds detection to on onConfigurationChanged to catch
those cases.
Fixes: QTBUG-118887
Fixes: QTBUG-118236
Pick-to: 6.7 6.5
Change-Id: Ie2f81798de97e460de839f7ebfde9a9efa25909f
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
New comparison macros are used for following classes:
- QCborArray::Iterator
- QCborArray::ConstIterator
Replace public operators operator==(), operator!=(), operator!<(), etc
of classes to friend methods comparesEqual(), compareThreeWay();
Use *_helper methods to have an access to protected members of
QCborValueRef class from friend functions.
Task-number: QTBUG-120300
Change-Id: Ie8ffef3e2278dfbf2bf0b32c30a7bf98d99fd1c3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QVariant is rather big for passing by value; and no caller has any
further use for the QVariant it's passing in.
Pick-to: 6.7 6.5
Task-number: QTBUG-122619
Change-Id: I2751745e715aacfa8982ac97b4ae777fde5e88de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Axivion (SV546) points out (based on a clazy "rule of three" that
might be rule of five by now) the lack of move and copy assignment and
construction. We don't want those anyway, so tell the compiler not to
create them.
Pick-to: 6.7 6.5
Task-number: QTBUG-122619
Change-Id: Ie951a2c3d60d76ad3448310d3f9bbda22190015b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Drive-by add NaN value for testing.
Change-Id: I5f663c2f9f4149af84fefffd17c035f099d01d55
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
We must compare the raw string length in UTF-8, not the UTF-16 one.
[ChangeLog][QtCore][QCborValue] Fixed a bug that caused certain
non-US-ASCII string comparisons to produce results not in line with the
CBOR specifications.
Pick-to: 6.5 6.6 6.7
Change-Id: I5f663c2f9f4149af84fefffd17c05d1c0f1bbc3a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
returning early if the object is null will not clear pending exceptions
from the previous failed JNI call, and that will crash the app on the
next jni call if an explicit exception clearing is not done, wish mostly
the case. Checking and clearing for exceptions has to always be done
under this call.
Pick-to: 6.7
Fixes: QTBUG-122135
Change-Id: I0d42d012a4d1305fa07147fd22860d7c005f9b83
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
f1bb9cfbf6 added this value, but it was
only when a test in qtdeclarative tried to use it that it was
discovered that it couldn't be set on 32 bit operating systems (armv7,
AKA imx7) due to overflow as a result of the bit shifting that is done.
Fix it by using an old, deprecated value. If any old codebase using
that older flag tries to build against a newer Qt with this change, it
shouldn't affect it, as setting the flag does nothing in Widgets, and
native menus didn't exist in earlier versions.
Task-number: QTBUG-69558
Change-Id: I520154d02e9ccf007ebd73807685212a19fbee1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Wrap the call in QVERIFY.
tst_QTextStream::read0d0d0a was also faulty as it *never* opened
the file because of a broken path. Fix it with QFINDTESTDATA.
Change-Id: I61a8f83beddf098d37fda13cb3bfb4aaa4913fc5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And ensure all combination of CBOR types are tested.
Amends e5ebb9022a
Change-Id: I5f663c2f9f4149af84fefffd17c02d352cd41f3f
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
Like the QPolygon code. This fixes a mistake in failing to clear the
list before de-marshalling in operator>>.
Updated most of the QDataStream tests to have data in the objects
they're streaming into, to ensure that the stream overwrites everything.
Fixes: QTBUG-122684
Task-number: QTBUG-122704
Pick-to: 5.15 6.5 6.6 6.7
Change-Id: I01ec3c774d9943adb903fffd17b6920c72f5042b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
New comparison macros are used for following classes:
- QJsonArray::iterator
- QJsonArray::const_iterator
Replace public operators operator==(), operator!=(), operator!<(), etc
of classes to friend methods comparesEqual(), compareThreeWay();
Use *_helper methods to have an access to protected members of
QCborValueConstRef class from friend functions.
Task-number: QTBUG-120300
Change-Id: I9b41b619107ce69d8b6dab4938232fab841aab51
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace public operators operator==(), operator!=() of
QJsonObject to friend methods comparesEqual().
Use QT_CORE_REMOVED_SINCE and removed_api.cpp to get rid of current
comparison methods and replace them with a friend.
Add friend method comparesEqual(QJsonObject, QJsonValue)
to the QJsonObject class, to support comparison between QJsonObject
and QJsonValue elements, see test-case valueEquals().
Task-number: QTBUG-120300
Change-Id: Ibab0b4b39966205447e31c41e94e7e1a4e31e553
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Replace public operators operator==(), operator!=() of
QJsonValue/QJsonValueConstRef/QJsonValueRef classes to friend
methods comparesEqual().
Use QT_CORE_REMOVED_SINCE and removed_api.cpp to get rid of current
comparison methods and replace them with a friend.
Delete non-exported public operators operator==(), operator!=()
for QJsonValueConstRef/QJsonValueRef classes.
Add comparison check to auto-test.
Task-number: QTBUG-120300
Change-Id: I01434af4ce5a7589733db4a9b14f54ad42e852ed
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This reverts commit f4bac3ca17.
It broke builds with Xcode 15
Change-Id: Iee232658ede3dfb09d65f3f6a95410c069941421
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Replace public operators operator==(), operator!=() of
QJsonDocument to friend methods comparesEqual().
Use QT_CORE_REMOVED_SINCE and removed_api.cpp to get rid of current
comparison methods and replace them with a friend.
Task-number: QTBUG-120300
Change-Id: I7b61765c34406b7a9fb7dd8b1fc554c87af6a3f3
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Types marked with [[clang::trivial_abi]] are considered to be trivially
relocatable for Clang. This is ABI compatible, since in Qt 6 we can
change the value of QTypeInfo::IsRelocatable "after the fact" -- it
simply means that code that doesn't get recompiled is pessimized.
Change-Id: I32e52bfb212c7919b2ebcf7832ede4404358330f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix the inclusions of stdlib headers to what is actually used in the
test.
Change-Id: I03ad4bdfd0b036bc4cee65b6bd2cd43ac7449722
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace public operators operator==(), operator!=() of
QJsonArray to friend methods comparesEqual().
Use QT_CORE_REMOVED_SINCE and removed_api.cpp to get rid of current
comparison methods and replace them with a friend.
Add friend method comparesEqual(QJsonArray, QJsonValue)
to the QJsonArray class, to support comparison between QJsonArray
and QJsonValue elements, see test-case fromToVariantConversions()
Task-number: QTBUG-120300
Change-Id: I8440ca0761bede8551ff792bfa7f22e47b56fa79
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is probably a remnant from when QAbstractFileEngine was public API
since it's been changed to private API, just use QFile::FileTime.
Pick-to: 6.7
Change-Id: I60d3d4ff811f95434b81d5ca115f5d43cfff8b15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes the ownership of the returned pointer clearer. It also
matches reality, some call sites were already storing the pointer in a
unique_ptr.
Also shorten the function name to "createLegacyEngine", you have to read
its docs anyway to figure out what it does.
Drive-by changes: less magic numbers; use sliced(); return nullptr
instead of `0`.
Change-Id: I637759b4160b28b15adf5f6548de336887338dab
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
On Linux "../" is /tmp, which is more likely to cause issues with the
dir.entrylist() below used in that test; /tmp could have a lot of
temporary files, any of them can be gone in a jiffy. Noticed this test
occasionally falking out when running tests in parallel (`ctest -R
"foo|bar" -j3`).
This may be an unintentional side effect of
b3e9e80719, which changed the code to use
a temporary dir for testing instead of creating/deleting dirs in the
source dir ("../" from the source dir has a more stable entries count
than /tmp).
Change-Id: I98da86223792bc9f34c173fc02cc84049ed699ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of using ~/Downloads, which we have no control over (OK for
the CI, but not locally), create a parent temp dir, then another temp
dir inside it.
Also rename it to nestedTempDirs, the issue from the bug report wasn't
tested because it relied on a dir being created, then failing to set
permissions on it. The code has changed a lot since then.
Pick-to: 6.7 6.6 6.5 6.2
Change-Id: I2b03d5d761117aaf436041c13c0dc394b106bf89
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And remove hasNext/next() methods. This remodels QAFEI to be like
QFileSystemIterator. This better fits the logic in the newly added
QDirListing class (which uses STL-style iterators).
QFSFileEngineIterator:
Initialize the internal nativeIterator in the constructor; also replace
the advance() private method with an override for the advance() method
inherited from the base class.
QResourceFileEngineIterator:
Override currentFileInfo(), with a QResouces the QFileInfo is created
on demand if/when this method is called.
This is the backend/private API, and QDirListing is the public API that
can be used in a ranged-for to iterate over directory entries.
Change-Id: I93eb7bdd64823ac01eea2dcaaa6bcc8ad868b2c4
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
New comparison macros are used for following classes:
-QXmlStreamAttribute
-QXmlStreamNamespaceDeclaration
-QXmlStreamNotationDeclaration
-QXmlStreamEntityDeclaration
Replace public operators operator==(), operator!=() of
classes to friend methods comparesEqual();
Use QT_CORE_REMOVED_SINCE to get rid of current comparison methods
and replace them with a friend.
Add checkStreamNotationDeclarations()/checkStreamEntityDeclarations()
test-cases to test change.
Task-number: QTBUG-120300
Change-Id: I0b5642b2e23cc21ede7bc4888f0a9bddd6c08d07
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace public operators operator==(), operator!=(), operator<() of
QCborMap to friend methods comparesEqual() / compareThreeWay().
Use QT_CORE_REMOVED_SINCE to get rid of current comparison methods
and replace them with a friend.
Delete #if 0 && __has_include(<compare>) blocks,
since they are not required anymore.
Add friend methods comparesEqual(QCborMap, QCborValue) and
compareThreeWay(QCborMap, QCborValue) to the QCborMap
class, to support comparison between QCborMap
and QCborValue elements, see test-case mapSelfAssign() ->
QT_TEST_EQUALITY_OPS(it.key(), QCborMap({{0, v}}), true);
Task-number: QTBUG-120300
Change-Id: I9e33df255d16484efd3124cf0632db859408fb5d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The QCOMPARE_EQ macro was mistyped.
This amends commit 5ea434b09f.
Change-Id: I313eb5ef02bb2266d659bdbe41d7d8f10691e0ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace public operators operator==(), operator!=(), operator<() of
QCborArray to friend methods comparesEqual() / compareThreeWay().
Use QT_CORE_REMOVED_SINCE to get rid of current comparison methods
and replace them with a friend.
Delete #if 0 && __has_include(<compare>) blocks,
since they are not required anymore.
Add friend methods comparesEqual(QCborArray, QCborValueConstRef)
and compareThreeWay(QCborArray, QCborValueConstRef) to QCborArray
to support comparison between QCborArray and
QCborValueRef/QCborValueConstRef, see test-case mapMutation().
Add QT_TEST_EQUALITY_OPS/QT_TEST_ALL_COMPARISON_OPS tests for QCborArray
test-cases.
Task-number: QTBUG-120300
Change-Id: Ifad1a04c61363618e8bba73cf7c87757552d722a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Copy test dirs from the source dir to a QTemporaryDir,
this way each run starts with a clean slate.
Also on some setups the source dir could be read-only.
Task-number: QTBUG-117449
Change-Id: Iea5fd661b66dd3cbae0b663bb504b14c8ccbe491
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was a runtime feilure in that we try to create
directories until it fails. This does not fail on wasm
so added a hardlimit of 20480
Change-Id: I6ef65f7be277fc8775879733f969d2ce008a439a
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Replace public operators operator==() and operator!=() of
QCborValueConstRef and QCborValueRef classes
to friend methods comparesEqual().
Replace public operator<() of QCborValueConstRef and QCborValueRef
classes to friend methods compareThreeWay() respectively.
Use QT_CORE_REMOVED_SINCE to get rid of current comparison methods
and replace them with a friend.
Delete #if 0 && __has_include(<compare>) blocks,
since they are not required anymore.
Add comparison() test-case for QCborValueConstRef/QCborValueRef
testing.
Add QCborValue::operator==()/QCborValue::operator!=()/
QCborValue::operator<() and QCborValueRef::operator==()/
QCborValueRef::operator!=()/QCborValueRef::operator<() operators
to the removed_api file.
Task-number: QTBUG-120300
Change-Id: I2e8e4e32b7b5b49da321364cc12986e9c64b5f37
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This has to be done from all places where we deref it. Otherwise we leak
memory.
Pick-to: 6.7 6.6 6.5
Fixes: QTBUG-116086
Change-Id: I57307ac746205578a920d2bb1e159b66ebd9b2cc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Because they always were, but we never tested it.
Change-Id: I503c65ed41b90d710c651d879a4477965f2ef0d6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Check that all string-like types implement compareThreeWay() as a
(hidden) friend function.
This test revealed some problems: because QByteArrayView is implicitly
constructible from QLatin1StringView, the qCompareThreeWay() call
sometimes picked the compareThreeWay() overloads with QByteArrayView
instead of picking the "reversed" overloads that use QLatin1StringView.
This was leading to wrong results, because QByteArrayView is
interpreted as utf-8 data, not latin-1.
Explicitly add the missing compareThreeWay() and comparesEqual()
overloads.
Note that relational operators were never affected by this problem,
because in C++17 mode we explicitly generate the reversed versions,
and in C++20 mode the compiler does that for us.
Task-number: QTBUG-117661
Change-Id: Ia96af59c60ebf2fae6cf2a49231d6b6f401aceaa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It is passing on my machine with Visual Studio 17.10 Preview 1.
But only with C++20 enabled.
Pick-to: 6.7 6.6 6.5
Task-number: QTBUG-101761
Change-Id: Ia5af3d75d35dda1df9b39bdc94f07dd746ff60af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change beginEntryList() to take a path parameter, which it passes on
to the QAFEIterator constructor; setting the path at construction
makes more sense, because typically the path isn't supposed to change
during iteration, and this simplifies the code at the call site.
Remove setPath(), the last usage in Qt repos was in QtCreator, and that
has been ported away from it.
Change-Id: I01baa688e0f9b582aacb63d7d98a794276e58034
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
C++11 has been required for a long time.
Pick-to: 6.7 6.6 6.5
Change-Id: Ib6c1571b100dd4eb8194d515f2180ca26481b556
Reviewed-by: David Faure <david.faure@kdab.com>
QEXTRACTTESTDATA returns a QSharedPointer<QTemporaryDir>, so the member
variable has to be of that type so that all code paths work.
Amends 986b5b4f47 (QDirIterator) and
c39a0d1e89 (QDirListing).
Change-Id: Ie4b76687125f0506a2c899acca222123f0b1c44a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add `f`-suffix to float assignments to avoid implicit conversion from
double to float.
Fixes: QTBUG-122303
Change-Id: I456e2952fe8c96783ab116ac4cb56a28b38de9d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test does not run just like that it is necessary to:
set maxSizeBits to 28
mapOffsetOverflow: Settings copied from Linux
Change-Id: Idc276a7e2d777a9a6ad0c0e90d729fb4646a38b6
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
When connecting a QFutureWatcher to the QFuture it will connect to the
output interface, which will queue up events to notify about the current
state. This happens in the thread of the QFutureWatcher.
Since 07d6d31a4c unfortunately the sending
of those events was done outside the lock, meaning the worker-thread
could _also_ send events at the same time, leading to a race on which
events would be sent first.
To fix this we move the emission of the events back into the lock
and because it is now inside the lock again anyway, we will revert
back to posting the callout events immediately, so this patch also
partially reverts 07d6d31a4c
Fixes: QTBUG-119169
Pick-to: 6.7 6.6
Change-Id: If29ab6712a82e7948c0ea4866340b6fac5aba5ef
Reviewed-by: Arno Rehn <a.rehn@menlosystems.com>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
This reverts commit c23d3ca1f0.
Reason for revert: Update to Emscripten 3.1.50 has been merged.
Change-Id: Ie2082dcc2ee34a6d4e519c143037fda9678be234
Reviewed-by: Even Oscar Andersen <even.oscar.andersen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jøger Hansegård <joger.hansegard@qt.io>
Replace public operators operator==() and operator!=() of QCborValue
to friend method comparesEqual().
Replace public operator<() of QCborValue to friend method
compareThreeWay().
Use QT_CORE_REMOVED_SINCE to get rid of current comparison methods
and replace them with a friend.
Delete #if 0 && __has_include(<compare>) blocks,
since they are not required anymore.
Task-number: QTBUG-120300
Change-Id: I884ff6ce2a71618b0e3eaa907f0852f93c2a073c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QOperatingSystemVersion intentionally does not define operator==() and
operator!=() since ae072cd9c4.
It means that we cannot use comparison helper macros.
Still, we can manually define four relational operators or
operator<=>() in C++20 mode, and give the class a partial ordering.
We choose partial ordering, because versions of different OS types are
incomparable.
Implement the operators in terms of helper function compareThreeWay(),
which potentially allows to use this class in some templated code.
As a drive-by: make the static compare() function noexcept, because
it really is.
Fixes: QTBUG-120360
Change-Id: Id4c9ce740e42baa719ca0ee84146d087b21675c6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTypeRevision consists of two quint8 values: major and minor version.
Each of the versions can be unknown.
The rules for comparing with the unknown version are as follows:
zero version < unknown version < non-zero version
At the same time, two unknown versions are considered equal.
This makes the comparison a bit tricky, but it still fits into the
category of strong ordering.
Replace the existing friend relational operators with helper functions
and comparison helper macros, making this type strongly ordered.
Update the unit-tests to use the new comparison helper test functions.
As the test functions check the reversed arguments as well, we can
reduce the number of rows for the data-driven comparison test.
Fixes: QTBUG-120359
Change-Id: Ib6f1037fc7b5fed148e35ee48b56b05dcd36b3b4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch simplifies the checks when migrating the class to comparison
helper macros.
Task-number: QTBUG-120359
Change-Id: I47a6ba20d3b89c31edc2f432621eae9385fbd0a3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Commit 90bc0ad41f ("QProcess/Unix: add
failChildProcessModifier()") added this line that set childStartedPipe
so that the failChildProcess() callback had something to write to. But
we left it set on exit from QProcessPrivate::startDetached(), which
caused the QProcess destructor to try and close it.
Noticed when debugging the issue for QTBUG-123083.
Pick-to: 6.7 6.7.0
Task-number: QTBUG-123083
Change-Id: I6818d78a57394e37857bfffd17bbc41c8400270f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It's the same aeshash() as before, except we're passing a template
parameter to indicate whether to read half and then zero-extend the
data. That is, it will perform a conversion from Latin1 on the fly.
When running in zero-extending mode, the length parameters are actually
doubled (counting the number of UTF-16 code units) and we then divide
again by 2 when advancing.
The implementation should have the following performance
characteristics:
* QLatin1StringView now will be roughly half as fast as Qt 6.7
* QLatin1StringView now will be roughly as fast as QStringView
For the aeshash128() in default builds of QtCore (will use SSE4.1), the
long loop (32 characters or more) is:
QStringView QLatin1StringView
movdqu -0x20(%rax),%xmm4 | pmovzxbw -0x10(%rdx),%xmm2
movdqu -0x10(%rax),%xmm5 | pmovzxbw -0x8(%rdx),%xmm3
add $0x20,%rax | add $0x10,%rdx
pxor %xmm4,%xmm0 | pxor %xmm2,%xmm0
pxor %xmm5,%xmm1 | pxor %xmm3,%xmm1
aesenc %xmm0,%xmm0 aesenc %xmm0,%xmm0
aesenc %xmm1,%xmm1 aesenc %xmm1,%xmm1
aesenc %xmm0,%xmm0 aesenc %xmm0,%xmm0
aesenc %xmm1,%xmm1 aesenc %xmm1,%xmm1
The number of instructions is identical, but there are actually 2 more
uops per iteration. LLVM-MCA simulation shows this should execute in the
same number of cycles on older CPUs that do not have support for VAES
(see <https://analysis.godbolt.org/z/x95Mrfrf7>).
For the VAES version in aeshash256() and the AVX10 version in
aeshash256_256():
QStringView QLatin1StringView
vpxor -0x40(%rax),%ymm1,%ym | vpmovzxbw -0x20(%rax),%ymm3
vpxor -0x20(%rax),%ymm0,%ym | vpmovzxbw -0x10(%rax),%ymm2
add $0x40,%rax | add $0x20,%rax
| vpxor %ymm3,%ymm0,%ymm0
| vpxor %ymm2,%ymm1,%ymm1
vaesenc %ymm1,%ymm1,%ymm1 <
vaesenc %ymm0,%ymm0,%ymm0 vaesenc %ymm0,%ymm0,%ymm0
vaesenc %ymm1,%ymm1,%ymm1 vaesenc %ymm1,%ymm1,%ymm1
vaesenc %ymm0,%ymm0,%ymm0 vaesenc %ymm0,%ymm0,%ymm0
> vaesenc %ymm1,%ymm1,%ymm1
In this case, the increase in number of instructions matches the
increase in number of uops. The LLVM-MCA simulation says that the
QLatin1StringView version is faster at 11 cycles/iteration vs 14 cyc/it
(see <https://analysis.godbolt.org/z/1Gv1coz13>), but that can't be
right.
Measured performance of CPU cycles, on an Intel Core i9-7940X (Skylake,
no VAES support), normalized on the QString performance (QByteArray is
used as a stand-in for the performance in Qt 6.7):
aeshash | siphash
QByteArray QL1SV QString QByteArray QString
dictionary 94.5% 79.7% 100.0% 150.5%* 159.8%
paths-small 90.2% 93.2% 100.0% 202.8% 290.3%
uuids 81.8% 100.7% 100.0% 215.2% 350.7%
longstrings 42.5% 100.8% 100.0% 185.7% 353.2%
numbers 95.5% 77.9% 100.0% 155.3%* 164.5%
On an Intel Core i7-1165G7 (Tiger Lake, capable of VAES and AVX512VL):
aeshash | siphash
QByteArray QL1SV QString QByteArray QString
dictionary 90.0% 91.1% 100.0% 103.3%* 157.1%
paths-small 99.4% 104.8% 100.0% 237.5% 358.0%
uuids 88.5% 117.6% 100.0% 274.5% 461.7%
longstrings 57.4% 111.2% 100.0% 503.0% 974.3%
numbers 90.6% 89.7% 100.0% 98.7%* 149.9%
On an Intel 4th Generation Xeon Scalable Platinum (Sapphire Rapids, same
Golden Cove core as Alder Lake):
aeshash | siphash
QByteArray QL1SV QString QByteArray QString
dictionary 89.9% 102.1% 100.0% 158.1%* 172.7%
paths-small 78.0% 89.4% 100.0% 159.4% 258.0%
uuids 109.1% 107.9% 100.0% 279.0% 496.3%
longstrings 52.1% 112.4% 100.0% 564.4% 1078.3%
numbers 85.8% 98.9% 100.0% 152.6%* 190.4%
* dictionary contains very short entries (6 characters)
* paths-small contains strings of varying length, but very few over 32
* uuids-list contains fixed-length strings (38 characters)
* longstrings is the same but 304 characters
* numbers also a lot contains very short strings (1 to 6 chars)
What this shows:
* For short strings, the performance difference is negligible between
all three
* For longer strings, QLatin1StringView now costs between 7 and 17% more
than QString on the tested machines instead of up to ~50% less, except on
the older machine (where I think the main QString hashing is suffering
from memory bandwidth limitations)
* The AES hash implementation is anywhere from 1.6 to 11x faster than
Siphash
* Murmurhash (marked with asterisk) is much faster than Siphash, but it
only managed to beat the AES hash in one test
Change-Id: I664b9f014ffc48cbb49bfffd17b045c1811ac0ed
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
So that it hashes to the same value as QString{,View}.
In order to test this, you must either run on a CPU other than ARM and
x86, or disable the AES hasher. I did that and can confirm siphash and
murmurhash do work with on-the-fly conversion from Latin-1.
Change-Id: I664b9f014ffc48cbb49bfffd17b03e5e62ec4e89
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This complements the previous commit by adding the heterogeneous lookup
in operator[]. Unlike the members of the previous commit, this one may
insert into the hash, in which case it needs a way to cast from the
heterogeneous type K to the actual Key type.
Change-Id: I664b9f014ffc48cbb49bfffd17b037c1063dfb91
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This implements support in QHash and QMultiHash for lookups of
heterogeneous key types that produce the same hash value. This is
implemented by duplicating each of the following functions into an
overload on Key and one a template that is enable_if-constrained to a
key type that meets the requirement:
* contains
* count
* equals_range
* find
* operator[] (const only)
* remove
* take
* value
* values (QMultiHash)
The non-const operator[] may insert into the hash, so it's not part of
this commit.
Change-Id: I664b9f014ffc48cbb49bfffd17b037852f0fd192
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This merges the tempFile and caching tests, which had been updated in
commit ae03ffaffd to attempt other
filesystems than APFS and btrfs.
Instead of adding yet another item to the list (xfs), let's insist by
writing more and flushing the OS buffers. Local testing says that btrfs
usually updates after the first write(), no later than the second, and
that APFS and XFS "just works" now (without the fsync() even).
Pick-to: 6.7
Fixes: QTBUG-123151
Change-Id: I6818d78a57394e37857bfffd17bbe7427307efc4
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
By using "wt" for all OS's; according to Thiago the 't' is ignored
everywhere except on Windows.
tests/auto/corelib/io/qfile/tst_qfile.cpp:2846:70: warning: comparison
between ‘enum QOperatingSystemVersionBase::OSType’ and ‘enum
QOperatingSystemVersion::OSType’ [-Wenum-compare]
2846 | const char *openMode = QOperatingSystemVersion::current().type() != QOperatingSystemVersion::Windows
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Amends 3446313c7a
Pick-to: 6.7 6.6 6.5 6.2
Change-Id: I310d7d6ce3833756ffdc47b000e052ef3afdfdef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The relational operators were removed in
8652c79df0 with the argument that they
do not have a total order. Back than it was a valid argument, because Qt
did not support any of the C++20 ordering types.
Now Qt has its own implementation for all three ordering types, so we
could technically add relational operators and claim that QVariant
provides partial ordering.
However, that could potentially lead to many bugs and/or unexpected
results, if people start using QVariant as a key in std::map/QMap
containers.
We do not want that to happen, so we only use the helper macros to
implement (in)equality operators.
This commit also extends the unit tests, providing more extensive
testing of (in)equality operators and the pre-existing
QVariant::compare() method.
Fixes: QTBUG-113234
Change-Id: I783f3b5df552da782627f4ed0a5bb1b577753a23
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I don't know what it is but it's not 1, because it is quite
often flaky in these tests. A single failure leads to deadlock
that takes 5 minutes to fail. Then a rerun might do another
5 minutes and fail the integration, or it will pass but take
longer to do so.
Pick-to: 6.7 6.6 6.5
Change-Id: I188276df7800b00a20dbe39edee91c582f0a82a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For some reason android in CI failed to include the
moc file through the mocs_compilation file.
It's an issue that needs some investigation, but
in the interest of time just include the moc file
directly.
Pick-to: 6.7 6.6 6.5
Change-Id: I079588598a6f4137ef1fccc482795d703b59bc6e
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Amends 8af346c1f6 and
1d9137e13f.
Found in 6.7 API review
Task-number: QTBUG-123115
Pick-to: 6.7 6.7.0
Change-Id: I98d79274f26f3439302a59181401b6e244fe5202
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The variadic templates are supposed to be removed from the
overload set when any of the parameters is a literal string type,
as otherwise we get conflicts with the legacy overload taking
class names and signatures as const char *. The detection of
a literal string types was missing a few specializations, so that
we ended up with the wrong overload being called, and class
names getting interpreted as method names instead.
Add the missing specializations, and add more test coverage
for using the old overloads.
Task-number: QTBUG-122235
Pick-to: 6.7
Change-Id: I5488f2009c8f62d74fac6754844f57cf64011414
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Lauri Pohjanheimo <lauri.pohjanheimo@qt.io>
The class had operator==(), operator!=() and operator <() defined as
public member functions, so use QT_CORE_REMOVED_SINCE and
removed_api.cpp to get rid of these methods and replace them with hidden
friends.
Use QT_TEST_ALL_EQUALITY_OPS macro in unit-tests.
Use new \compares command in the documentation to describe the
comparison operators provided by QUrl.
Task-number: QTBUG-120303
Change-Id: Ic4fa2335292cc4b75ad2373832c0b89d768f529c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
P2447 has been merged in C++26, backport the same functionality.
This makes QSpan<const T> a proper replacement for a const QList<T>&
parameter, because now both can be built via a braced-init-list.
// void f(const QList<int> &l); // old
void f(QSpan<const int>); // new
f({1, 2, 3}); // now OK
This is, technically speaking, SiC: in the presence of both `f`
overloads, the code above would have called the QList one. Now instead
the call is ambiguous.
We've been there already -- this is QString and QStringView all over
again, and the solution is the same: get rid of the owning container
overload. I'd rather have this construction *sooner* rather than *later*
in order to minimize the fallout.
And just like QString vs QStringView, there's nothing really doable to
prevent instant-dangling situations:
QStringView v = getString(); // dangles
QSpan<const int> s = {1, 2, 3}; // ditto
except for using QSpan (QStringView) as a *parameter type only*.
Note that QSpan with dynamic extent was already convertible from
std::initializer_list through its ranged constructor. However this fact
alone doesn't unlock the above syntax. QSpan with a static extent was
also convertible for the same reason. (This is non-standard:
std::span's range constructor for static extents is explicit, but QSpan
doesn't follow that design choice and makes the constructors implicit
instead.)
Found in API-review.
Pick-to: 6.7
Change-Id: I160ab5b292b0c2568cd9a7ad1b4430085f475c29
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
According to QUIP-18 [1], all tests file should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Task-number: QTBUG-121787
Change-Id: Iee9f4fca676e77ab9d8ed485a28ce5ea8803be15
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
According to QUIP-18 [1], all tools file should be
LicenseRef-Qt-Commercial OR GPL-3.0-only WITH Qt-GPL-exception-1.0
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: Icd5d5be2e04819617e68ff142924de1773bebbad
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Which will be used to represent timer IDs. Thanks to Marc for the idea
to use "a strongly typed int".
QTimer got a new id() method that returns Qt::TimerId (can't overload
timerId()). Various classes in qtbase have a member named timerId(), but
a new method is needed anyway in QTimer so id() it is (this is the
reason QChronoTimer only has id() and no timerId()). Besides
timer.timerId() has an extra "timer".
This commit fixes the inconsistency between QObject using `0` timer id
to indicate "failed to start", while QTimer::timerId() returned `-1` to
indicate "timer is inactive". QTimer::id(), being a new method and all,
now returns Qt::TimerId::Invalid, which has value `0`, so that the
values match between the two classes. Extend the unittests to ensure
QTimer::timerId()'s behavior is preserved.
[ChangeLog][Core][QObject] Added Qt::TimerId enum class, that is used to
represent timer IDs.
Change-Id: I0e8564c1461884106d8a797cc980a669035d480a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The interval in QTimer is a QProperty of type int, which means it's
limited to the number of milliseconds that would fit in an int (~24
days), this could cause overflow if a user constructs a QTimer with an
interval > INT_MAX milliseconds. And it can't be easily changed to use
qint64/std::chrono::nanoseconds:
- changing the getters to return qint64 means user code would have
narrowing conversions
- the bindable QProperty interval can't be changed to qint64 during
Qt6's lifetime without the risk of breaking user code
- adding a new bindable QProperty that is qint64/nanoseconds is an
option, but it has the complication of what to do with the int
interval; set it when setInterval(milliseconds) is used by using
saturation arithmetic? and what about notifying observers of the
changed interval?
Thus the idea of creating a new stop-gap class, QChronoTimer, as a
cleaner solution. Both classes use QTimerPrivate.
During the lifetime of Qt6, QTimer's interval range is about 24 days,
whereas QChronoTimer's interval range is about 292 years
(duration_cast<years>nanoseconds::max()).
Currently the plan is to fold QChronotTimer back into QTimer in Qt7.
Mark all QPropertyS in the new class as FINAL since they aren't
intended to be overridden; this offers a performance boost for QML[1].
[1] https://lists.qt-project.org/pipermail/development/2024-February/044977.html
[ChangeLog][QtCore] Added QChronoTimer, which uses a
std::chrono::nanoseconds intervals, as a replacement for QTimer.
Fixes: QTBUG-113544
Change-Id: I71697f4a8b35452c6b5604b1322ee7f0b4453f04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Ultimately this is the best way to keep the log history of the code.
Change-Id: I3413deffdb093a3239d65b6ca939e744224e722a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Then we will automatically handle invalid leading characters instead
of throwing away the whole sequence when it cannot be converted.
Added a test that was failing before.
Drive-by change: add a comment explaining why we
have the stack allocated buffer.
Task-number: QTBUG-118834
Change-Id: I647a58f2ba95e2e7ed4ea6a964d99ecc0c91fad3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some machine in CI is failing some of these sometimes and
I would like to know by how much.
Pick-to: 6.7
Change-Id: I88b41d5cde81419f7c11f7038101962630eb31ef
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Also extend unit-test to use new test helper functions.
Remove the now-redundant test for three-way comparison, because it is
covered by the test helper functions.
Task-number: QTBUG-117661
Change-Id: I242b560c281245e04e34353c80000a20998fc677
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Replace the existing friend relational operators with the macros.
Add the previously-missing relational opertors with QChar and char16_t.
This allows to remove the last dummy relational operators and the
macros to generate them in tst_qstringapisymmetry.
Because of a bug in libstdc++[0], we have to explicitly keep the
QBA vs QBA relational operators even in C++20 mode. This problem is
specific to QByteArray, because it is convertible to const void *.
[0]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=114153
Task-number: QTBUG-117661
Change-Id: Iac7f81cd3274331b7c7695a51803321b511361c0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace the existing friend relational operators with the macros.
Add the previously-missing QChar vs `const char *` relational operators.
These require out-of-line helper methods, because we need to interpret
the `const char *` array as utf-8.
The `const char *` relational operators cause ambiguities when
comparing QChar with 0 (previously it was only handled by the nullptr_t
overloads). As we have it in several places in our tests, I'd assume
that the users can also do it. To resolve the ambiguities, mark the
new relational operators as Q_WEAK_OVERLOADs.
This allows to remove the dummy QChar vs `const char *` relational
operators from tst_qstringapisymmetry, but at the same time requires
that we introduce new dummy operators for QByteArray vs char16_t
comparison. These will be fixed in a follow-up patch.
For QLatin1Char - convert to uchar before doing the comparison, to
match the behavior of QLatin1StringView and QChar. Extend QChar's
unit tests.
Task-number: QTBUG-117661
Change-Id: I9213fe05a5efdb96d48688f07bec9519f9887a77
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows to remove the dummy relational operators from
tst_qstringapisymmetry.
Task-number: QTBUG-108805
Change-Id: I7cb3154d6fcb571cafab6b318806f74bc8300448
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add QU8SV vs QSV, QU8SV vs QChar, and QU8SV vs char16_t relational
operators.
This allows to get rid of the dummy relational operators in
tst_qstringapisymmetry.
Task-number: QTBUG-117661
Change-Id: If95d7418efd13c505ed0e3bef748b86ff55e623a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The comparison with QStringView works as is, there is no need to add
explicit operators.
Add the missing relational operators with QUtf8StringView. Once it
is added, comparison of QString with u8"string literal" becomes
ambiguous, so explicitly add operators for `const char8_t*` as well.
This also makes the comparison with u8 string literals faster,
because it now uses a view instead of constructing a QString.
Adding QUtf8StringView overloads also makes comparison with
`const char *` ambiguous if QT_RESTRICTED_CAST_FROM_ASCII is defined.
To fix that, mark the overload as Q_WEAK_OVERLOAD. Luckily, we can
just use the third Attributes parameter of the macro for that.
Provide more unit-tests to cover the new relational operators.
Task-number: QTBUG-117661
Change-Id: I60d1f4ad7ea607472deeb5c250e62f2bb7019268
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Ivan Solovev
Jari Helaakoski
Ahmad Samir
Tatiana Borisova
Lucie Gérard
Thiago Macieira
Tomasz Kozłowski
Edward Welbourne
Mårten Nordheim
Even Oscar Andersen
Ari Parkkila
Assam Boudjelthia
Jarek Kobus
Ali Kianian
Matthias Rauter
David Faure
Fabian Kosmale
Marc Mutz
Morten Sørvig
Giuseppe D'Angelo
Lauri Pohjanheimo
Mitch Curtis
Volker Hilsheimer
Tor Arne Vestbø
Joerg Bornemann
Ulf Hermann
Isak Fyksen
Piotr Wierciński
Alexandru Croitor
Rym Bouabid