Upgrading emscripten to 3.1.50 breaks this test, so we disable the time
for time being. After emscripten update this test is to be enabled
and fixed.
Change-Id: Ic48d81e2285ed8f7639bf20c6c29b2b9e402a591
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
As a result of using QWidget::setVisible to show the child widgets we
would end up also setting ExplicitShowHide. This is not in line with
the intent of ExplicitShowHide, which is to flag a widget as explicitly
shown/hidden by the developer, which in turn prevents Qt Widgets from
toggling WState_Hidden when the widget is reparented.
By using QWidgetPrivate::setVisible instead, we can show the child
without setting ExplicitShowHide.
As side effect of this is that we no longer reset WA_WState_Hidden
from QWidgetWindowPrivate::setVisible(). This is an issue when the
setVisible call comes as a result of destroying the QWidgetWindow,
as that is an implicit hide, and should not result in the widget
having WA_WState_Hidden. QWidget handles this case in hideChildren
by not calling QWidgetPrivate::setVisible -- instead doing its own
reset of WA_WState_Visible. We don't want to untangle this just yet,
so as a workaround we detect that the widget is already !isVisible(),
thanks to hideChildren having hidden it, and then skip the call
to QWidgetPrivate::setVisible that results from QWindow::destroy().
Task-number: QTBUG-121398
Pick-to: 6.7
Change-Id: Ib5b4d9c84f0569124c5f3ca2169cabff18934e2d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The nativeHiddenChild is not used for anything, and shouldn't be
needed to trigger the failure condition.
That said, I was not able to reproduce the test failure on macOS
14 with the test neither pre or post patch, nor with any of the
test cases mentioned in 51300566ff,
nor with 51300566ff itself, so this
has seemingly been fixed or worked around some other way in the
meantime.
Task-number: QTBUG-121398
Pick-to: 6.7
Change-Id: I299e7f4b71ebdb17870348a3d5b0c49a93228c8b
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
This is cleaner as the test dirs/files are created in a QTemporaryDir
that is cleaned up automatically, so less manual cleanup in the
unittest.
This also fixes issues for build environments where the source dir is
read-only.
entrylist dir in the source dir is only needed for the construction of
the QResource in the CMakeLists.txt.
Task-number: QTBUG-117449
Change-Id: I3e6389ff730c3a617854e85318f80838e012f2c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't call the native function directly, call the Java function that
calls the native function.
Pick-to: 6.7
Change-Id: Icdcf250313a38f6e4bc2b90fb7b0adbfa5a890fb
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Since 6.7 we consider the BUILD_SHARED_LIBS when creating libraries
using Qt CMake API. This change may affect the user projects that rely
on the old strategy of selecting the default library type. To preserve
the old behavior this change introduces the QTP0003 policy that allows
user to control whether the BUILD_SHARED_LIBS should or shouldn't be
considered in library creation process.
The policy doesn't affect Qt repos, we assume that we want the NEW
behavior by default.
Fixes: QTBUG-121707
Pick-to: 6.7
Change-Id: I4bcfbd8966839731624e3f7ef9e0d6bb2782ac50
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
It was shown to have poor performance compared to contains() and
insert().
Pick-to: 6.7 6.6 6.5
Change-Id: I61cfbc8c34e325d677d7954118ef68057df640cb
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Amends 83e5d74864.
A model index returned by QFileSystemModel might become invalid when
events get processed, so don't store the result of setRootPath to re-use
it in a QTRY_COMPARE function. Instead, always ask for a fresh model
index.
Also, use std::chrono::duration::count correctly; it returns the "tick",
not the corresponding milliseconds, so (10s).count() returns 10 instead
of 10000. Explicitly use 10000ms here.
Un-blacklist the test on macOS again.
Task-number: QTBUG-74471
Pick-to: 6.7 6.6 6.5
Change-Id: Ic98bb53c696441131bbc1055b64822faf2aec96f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Since QVersionNumber doesn't have an existing way to modify individual
segments, provide only const_iterator.
[ChangeLog][QtCore][QVersionNumber] Added (const) iterators over
segments (begin()/end(), incl. c- and r- variants).
Change-Id: Ia9af70c2a9c59f630123894ad2c9f38031ef5b8f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt 5, a QBitArray could not contain more than INT_MAX bits, because
the then-size_type, int, cannot represent more, even if the underlying
storage could hold 8x as much, and the serialisation format, using
unsigned int, could represent 2x.
Therefore, reject old formats with sizes that exceed INT_MAX elements
as corrupt.
Likewise, the Qt 6 serialisation format unconditionally uses 64-bit
sizes, but 32-bit platforms still cannot represent more than
numeric_limits<qsizetype>::max() (= INT_MAX) bits in memory. This is a
valid stream for 64-bit platforms, though, so ideally, this should be
using SizeLimitsExeeded, which, however, is only available from Qt
6.7. So, for now, and until we have SizeLimitsExeeded, mark the stream
as corrupt here, too.
[ChangeLog][QtCore][QBitArray] Fixed undetected overflows in the
deserialisation (opertor>>()) from QDataStream.
Pick-to: 6.7 6.6 6.5 6.2 5.15
Change-Id: Ib24cf9218c06a3a05185723c77d4313611c2dd40
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Match QCOMPARE logic when printing stringlists that don't match, it's
"actual" then "expected"
- Use row tag names that don't interfere with the shell; e.g. using
`tst_qdiriterator iterateResouce:':/testdata'` doesn't work for some
reason, so just add a qrc prefix
Change-Id: I3d556b83ec34f2dab15ea3178273af10fb2c62e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
cxx11_future flag should be disabled for VxWorks. VxWorks still does
have some bugs related to this std features and some parts of code needs
to be excluded. At least till the 24.03 VxWorks release as for now this
is the expected release that should contain fixes.
Task-number: QTBUG-115777
Change-Id: Ic652403697d727f4ae05ae7287ff8285075d3802
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test uses socketpair which is not available on vxworks, so it fails
to compile.
Task-number: QTBUG-115777
Pick-to: 6.7
Change-Id: I46f3b4ebd937dc4ca2511381dd58451434e6a2fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The boundingRect and controlPointRect did not use the start point from
the `QPainterPath(const QPointF &startPoint)` constructor until the
`dirtyBounds` or `dirtyControlBounds` member variables were set to true.
Those two are false on construction. This bug was fixed by adding a new
constructor for QPainterPathPrivate that initializes the `elements`,
`bounds` and `controlBounds` member variables with the start point from
the constructor.
There is also an autotest to verify that the top left of the
boundingRect and controlPointRect are at the same position as
elementAt(0) when the start point constructor is used.
[ChangeLog][QtGui][QPainterPath] boundingRect() and controlPointRect()
now use the start point from QPainterPath(const QPointF &startPoint).
Pick-to: 6.7 6.6 6.5
Change-Id: I7bf30364406c14ed60f75d24b78a9a5535f75d93
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Unlike other containers, a QBitArray's size() is not limited by
storage, but, esp. on 32-bit platforms, its size_type: A INT_MAX
size() QBitArray only requires 256MiB of storage.
So we can't rely on "won't happen in practice" here and need to avoid
the potential UB (signed overflow) in the (size + 7) / 8
logical-to-storage-size calculation by using unsigned arithmetic.
Use the opportunity to Extract Methods storage_size() and
allocation_size(), which differ by one (d[[0] contains the size() mod
8), making it clear what's what.
[ChangeLog][QtCore][QBitArray] Fixed a bug with QBitArrays whose
size() came within 7 of the size_type's maximum.
Pick-to: 6.7 6.6 6.5 6.2 5.15
Change-Id: I5d94bae9c9c210ba1e36f8cf03609125c81bd15d
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
I've noticed that on some Windows systems, the resolver refuses to
resolve IPv6-only addresses. But it can still do reverse resolution from
IPv6.
Change-Id: I5dd50a1a7ca5424d9e7afffd17adfe739ded932e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Our ideal scenario was to run python to run its getnameinfo()... so just
use getnameinfo() directly. This also avoids the problem of Python not
being present and our falling back to nslookup.
Pick-to: 6.7
Change-Id: I5dd50a1a7ca5424d9e7afffd17adfc830386306f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
These exhibit the problem described by a recent bug report.
Task-number: QTBUG-121485
Change-Id: Ia09acfa22e687ba096091a73f30df1ffd22a6e32
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
There were three things going on in this test (itself a sufficient
reason to split it up):
* Some reporting and checking of the default locale; the reporting is
duplicated in defaulted_ctor() and the check fitted more naturally
there.
* Checks that various combinations of language, script and territory
got resolved according to likely-subtag rules. These were handled
via a macro and natural candidates to become data-driven.
* A test that territory is preserved when it's the only given tag
(with a few known exceptions); broken out as a steparate test.
In the process, give the data-rows of the likely-subtag parts names
that let me extend their testing to also test construction from
string. The territory-only cases can't support that, as QLocale
doesn't support und_* forms of tags for unspecified language.
Change-Id: Id9f0fc46f30eb887b47931bad1619255acb44266
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace various QFETCH()/QCOMPARE() pairs with QTEST().
Just because it's terser.
Change-Id: I8496a293e3634991dcb33b8c7939f1c3028a63c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Instead of separate QJsonObject and QJsonArray types.
Resulted from API-review
Pick-to: 6.7
Change-Id: I977d692d3709a8c3aa872683ddda54a143c25e67
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This naming should make it clearer that (successful) calls to
readJson(), readBody(), and readText() consume the data received
so far.
Resulted from API-review
Pick-to: 6.7
Change-Id: I09ca9eac598f8fc83eecb72c22431ac35b966bf5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Note: documentation will be updated in a follow-up commit
This commit makes QRestReply and QRestAccessManager
classes lighter, non-owning wrappers. Furthermore their
APIs don't duplicate the wrapped QNetwork* APIs.
This makes it easier to use / opt-in to these helpers
in pre-existing applications which are based on
QNetworkAccessManager and QNetworkReply.
Since APIs are no longer duplicated, the QRest
classes are more obviously a convenience _wrapper_,
as opposed to being an alternative vertical stack.
In practice this change consists of:
- QRestAM never instantiates QNetworkAccessManager,
but accepts it via constructor. It does not take
ownership of the QNetworkAccessManager.
- QRestReply accepts QNetworkReply via constructor. It
does not take ownership of the QNetworkReply
- Signals and most duplicated functions are removed
from both QRestAM and QRR.
- QRestReply is no longer a QObject
- Since QRestAM doesn't have much to report anymore,
the debug operator is dropped.
Resulted from API-review
Pick-to: 6.7
Change-Id: Ib62d9cc2df41cac631396a84bb7ec4d2d54b0c8c
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If the line width is negative, then we might exit the layout
loop before consuming any text, and thus the loop will never
finish. This is a side effect of a change for maximumWidth:
991c056438.
49a63d3759 fixed this issue for
QTextLayout::setFixedSize(), but I forgot to do the same in
the overload of QTextLayout::setNumColumns() which includes
an alignment width and therefore sets the line width in addition
to the column count.
Basically, we just make sure the line width is never negative so
that the width > line.width condition also means the width > 0.
Pick-to: 6.5 6.6 6.7
Fixes: QTBUG-115459
Change-Id: If904bfc64cd74e819a0864db55fa9555073d0781
Reviewed-by: Vladimir Belyavsky <belyavskyv@gmail.com>
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Add rbeing/rend overload, relevant typedefs, and decrement operators.
As a drive-by, add noexcept to begin/end functions.
Found during header review.
Pick-to: 6.7
Task-number: QTBUG-119952
Change-Id: I32d9a7d50a1f03550944c2247516c455d4822fe7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Augment test case. Found during header review.
Pick-to: 6.7
Task-number: QTBUG-119952
Change-Id: I326395397167edb05ff1f45f7151614c02b7e7eb
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Add missing nested typedefs for both the QJniArray container and
the QJniArrayIterator. Expand test case to make sure that some standard
algorithms (such as std::distance and ranged for) work with those
types.
Found during header review.
Pick-to: 6.7
Task-number: QTBUG-119952
Change-Id: I96f348215c6f1e0e1ce777d9bdd2f172d7e52974
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Version 883ced078a83f9d79a98933145425c221a5e51f0, fetched on
2024-01-25.
[ChangeLog][Third-Party Code] Updated the public suffix list to upstream
SHA 883ced078a83f9d79a98933145425c221a5e51f0.
Pick-to: 6.7 6.6 6.5 6.2 5.15
Task-number: QTBUG-121325
Change-Id: I95e82b5c351218c1641e11e7a166ae21be2c5ad6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Actually triggered by investigating QTBUG-121485, where the issue
turns out to be at construction time, but the complete lack of any
testing of endonyms clearly needed addressed in any case. In the
process, break up the long list of private slots in the test-class
declaration.
Task-number: QTBUG-121485
Change-Id: I49021f78d3bea2e1e55b2755a45943ab3fc23722
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Every test row was following its locale-specific test with tests for
Irish and Greek day names, repeated regardless of the locale-specific
data. Express these tests as rows in their own right and shorten the
per-row testing, so we only do each once.
Change-Id: I8f919b50ac54423bacab6e5a9d34254b7db59a55
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the process, change it to use QCOMPARE(A, B) rather than QVERIFY(A == B).
Change-Id: I26c64100b08aef43c56f5266c0de71f5cde12816
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... to complement QTEST_THROW_ON_FAIl/SKIP environment variables.
This allows to conveniently test both modes by running each test
twice.
Task-number: QTBUG-66320
Change-Id: I8b2810e8345061c98472d846017de910a11e0657
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Add exception classes and use them to change the control flow for
QTEST_{FAIL,SKIP}_ACTION from return'ing from just the immediate
function to the full way to the QTestLib infrastructure, here we
filter them out.
There are three modes:
- If QT_NO_EXCEPTION, then we return
- If QTEST_THROW_ON_... is also defined, #error out
- Otherwise, if QTEST_THROW_ON_... is defined, always throw
- Otherwise, the decision is made at runtime (with defaults read from
QTEST_THROW_ON_... environment variables).
Three selftests depend on the old behavior, as they explicitly check
that multiple FAIL SKIP etc emerge, which the new framework, of
course, prevents. Locally disable throwing at the test function level.
Add initial docs and enable exceptions in all of the selftest
subprograms to facilitate switching between the two runtime-selectable
modes.
[ChangeLog][QtTest] Added QTEST_THROW_ON_FAIL and QTEST_THROW_ON_SKIP
C++ macros and environment variables that, when defined, change how
QCOMPARE/QVERIFY/QSKIP etc exit the test function on failure. Instead
of a return, exiting only the immediately-surrounding function, they
throw a special exception instead, thereby exiting from subfunctions
of the test function, all the way to QtTestLib.
Fixes: QTBUG-66320
Change-Id: I96c38d2a1dcdd9de84942cf448a8bbf3ab6d3679
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Tooling can then use this information to find the correct base class,
even absent C++ scoping information.
Pick-to: 6.7 6.6 6.5
Task-number: QTBUG-101141
Change-Id: I5350da8d2d9aaf5ec86027357131ebac1eb50372
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The definition of iterator_t, and, therefore, of is_compatible_range
depends on this, otherwise say, 0, is being treated as a valid range
and hits a hard error in adl_begin() when trying to call begin(int&).
TIL: decltype(auto) does _not_ SFINAE.
Fix by calculating the return type manually, re-enabing SFINAE.
Pick-to: 6.7 6.6
Change-Id: Icacd70554f4050ecaeb396c9ae60bc4f21a220c9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Given a dir A that has some files and a subdir B, when a model is set to
only show files, setting the root path to A, the filters are initially
respected. Setting the root path to B then back to A, the filters would
be ignored and B would be visible in the model.
Traversing the path elements in node() led to dir B getting added to
the bypassFilters hash table, which made filtersAcceptNode() bypass the
filters.
I couldn't find a commit explaining the logic behind using bypassFilters
(the trail goes cold at the 'Qt 4.5' mega commit). The only clue I found
was the "// always accept drives" comment in the code, which hints at
this being useful only on Windows(?).
Fixes: QTBUG-74471
Pick-to: 6.7 6.6 6.5
Change-Id: Icb9055524a28990c591e924634a63e29a49835aa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is needed for proper inet socket address working
on this platform.
Pick-to: 6.7
Task-number: QTBUG-115777
Change-Id: Icde7ff7baf257762339f5f72a783c92f6b297a46
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
GCC has a bug [1] that does not allow to specialize templates
outside of a namespace.
An attempt to build the test results in the following error:
tst_manualqdatastream.cpp:18:15: error: explicit specialization in
non-namespace scope ‘class tst_QDataStream’
Fix it by converting the template specializations into simple function
overloads.
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85282
Pick-to: 6.7
Change-Id: I7803cce1687ca8ae992f1a57394346eb6fc90c8b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The file was added in fd48ce0b73
by a TQtC employee, so the header should mention The Qt Company Ltd.
Pick-to: 6.7
Change-Id: Ib191d2d63656c42f783db87de489814d387dfbca
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This status is supposed to be used when the stream tries to read
or write more data than it is supported by the current platform.
For example, reading more than 2 GiB of data on a 32-bit platform will
result into this status, but it will work fine on a 64-bit platform.
This patch uses the new status in read operations.
Amends fd48ce0b73
Found in 6.7 API review
Pick-to: 6.7
Change-Id: I675b1ee25fafba174ce8f94c3470dbb7893d6d9e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The moc generated code does a sanity check that NOTIFY signals actually
exist in the parent class when they cannot be found in the class moc
currently runs on.
The logic there was however too simplistic, and couldn't deal with
signals taking a parameter.
Fix this, and take the opportunity to use a proper static_assert instead
of generating a "normal" compile error.
We do not do any checks for the presence of QPrivateSignal, as the whole
point of QPrivateSignal is that it should be private (and not e.g.
protected).
Moreover, we adjust QMetaProperty::notifySignalIndex to take
single-argument notify methods into consideration as well when
encontering an unresolved notify index.
Fixes: QTBUG-115989
Pick-to: 6.7
Change-Id: I8a056a15777f3132691e207b4b9ab6c2c9b2126d
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The code did not handle the path where we didn't have a challenge.
We cannot recover from that so we just have to fail the request.
Amends fe1b668861
Pick-to: 6.7 6.6 6.6.2 6.5 6.2
Fixes: QTBUG-121515
Change-Id: Ie39a92e7439785a09cad28e8f81599a51de5e27f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When a QTextLine consists of multiple different scripts and the
fonts had negative bearing, the background for a script item could
overdraw the previous item's text, causing it to look clipped.
This was because the background and text was drawn in a single pass,
and moving the background drawing into its own pre-pass fixes the
issue.
[ChangeLog][QtGui] Fixed an issue where drawing text from different
writing systems in the same line and including a background could
cause parts of the text to be clipped.
Pick-to: 6.5 6.6 6.7
Fixes: QTBUG-121040
Change-Id: I3f79e6d33c09a2a92853bc8752dbe11a0bea2dd0
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Piotr Wierciński
Tor Arne Vestbø
Ahmad Samir
Volker Hilsheimer
Alexey Edelev
Mårten Nordheim
Marc Mutz
Krzysztof Sommerfeld
Łukasz Matysiak
Noah Davis
Thiago Macieira
Edward Welbourne
Juha Vuolle
Eskil Abrahamsen Blomfeldt
Tomasz Kozłowski
Ivan Solovev
Fabian Kosmale
Liang Qi
Marcin Zdunek