In preparation for blocking QFlags->int conversions. The existing
casts to uint are wrong, in the general case, as the enumeration
might actually be backed by signed integers; that makes them
fail to compile. Port them to toInt(). For symmetry, also use
qToUnderlying.
Change-Id: I851544f6ba05295fa5f6c5cc355b9de0f1362e2b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were two problems here: first, qHash(std::pair) must be declared
before qHashMulti that might call back to qHash(std::pair) (i.e., a pair
with one element that is also a pair). But moving the declaration above
causes the second problem: the noexcept expression can't refer to qHash
functions that aren't declared yet. So we forward-declare a constexpr
function for that result, but implement it far below.
Fixes: QTBUG-92910
Change-Id: Ia8e48103a54446509e3bfffd16767ed2e29b026c
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's how much there is in Linux's AT_RANDOM block.
I've also removed the check for validity. It's highly unlikely that 128
bits are bad.
Change-Id: Id2983978ad544ff79911fffd16723161ea7ec315
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Instead of initializing the whole QRandomGenerator::system(), which in
turn gets to checking CPUID and whether the HWRNG works, trust the
operating system functions for an initial value. On Linux, we'll use 4
or 8 of the 16 bytes of random data that the kernel populates for us on
AT_RANDOM.
This should make Qt applications not stall on an early system launch
without an RNG daemon, if compiled without getentropy() support. And
avoids silly mistakes causing recursion, like QTBUG-78007 found.
Additionally, qt_random_initial_value() will most likely not throw
either. It's marked noexcept, even though SystemGenerator::fillBuffer
could throw on Linux, if the current thread is canceled, but Linux also
has AT_RANDOM. That leaves the other Unix systems without getentropy()
(read: macOS, since the BSDs have getentropy()).
Fixes: QTBUG-69555
Change-Id: Id2983978ad544ff79911fffd1671fca1a9f9044d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
That's two years from when the replacements were added (6.2).
Change-Id: Id2983978ad544ff79911fffd1671f7dd38fede02
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It is noexcept, except when initializing. When initializing, let's just
use qEnvironmentVariableIntValue (which we should have used anyway),
which avoids the memory allocation and is noexcept. The QRandomGenerator
functions are not marked noexcept, but are mostly so: they can't throw
regular exceptions, but some implementations do call POSIX Thread
Cancellation Points, which may cause forced stack unwinding. That's
unlikely to happen at the moment of the QHash initialization.
This is also mitigated in the next commit.
Change-Id: Id2983978ad544ff79911fffd1671fd16f8d6378d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Commit 37e0953613 added a to-do, but we
can actually change the type, since we've documented since Qt 5.10 that
setting a non-zero value (aside from -1) with qSetGlobalQHashSeed was
not allowed. Storing a value to be reset later is simply not supported.
Change-Id: Id2983978ad544ff79911fffd1671f7b5de284bab
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
qprocess_unix.cpp:633:55: error: ‘i’ was not declared in this scope
Change-Id: I152fbd9df6e9d3f31e2c2c8b23a3c1ab87aa237a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To avoid build error with no exceptions:
qtbase/src/corelib/serialization/qcborstreamreader.cpp:1586:9: error: cannot use 'try' with exceptions disabled
try {
^
qtbase/src/corelib/serialization/qcborstreamreader.cpp:1629:9: error: cannot use 'try' with exceptions disabled
try {
^
2 errors generated.
Used compiler: https://github.com/mstorsjo/llvm-mingw
It's not a supported configuration, but the change is simple.
Change-Id: I263ce23b458f114b2330e832c5f4fd2a99cbb973
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is now possible to call qt_add_big_resources with multiple .qrc files
that are in different directories but have the same file name.
Before, this resulted in target name conflict errors.
Pick-to: 6.1
Fixes: QTBUG-93230
Change-Id: Ic3d9d6974a107163aeb7ada0b6f1fa113fb18de0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Get rid of a reduntant initialization; a data member gets default
initialized anyways.
Change-Id: I85ad4c9a00b3066ccd993dfc2652a3f0164a860e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
In random order:
* QFutureInterfaceBase has a d-pointer, and copy semantics. So,
"naturally" extend it to support move semantics as well. (These get
used by QPromise/QFuture, as they both hold a QFutureInterface*
as a data member). The only addition needed is a check for a null
d-pointer in the destructor.
Drive by, reorganize the code for the copies, and use copy-and-swap
instead of the hand-rolled solution. Also, add a free swap()
overload, and mark the existing one as candidate for inlining
in Qt 7 (doesn't need to be an exported function).
* QFutureInterface inherits QFutureInterfaceBase, again with value
semantics. To be honest, I'm not sure why QFutureInterfaceBase is
polymorphic -- could be a design mistake, as polymorphic classes
don't mix with value semantics. Anyways, reorganize the code for
copies, apply copy-and-swap, and add move semantics. This requires
adding a check into derefT().
* Finally, QPromise was already move-only, but had broken move
semantics: the move constructor was not noexcept (!) and it actually
allocated memory (!!!). Fix that one (can be defaulted now), and
streamline the move assignment via the proper macro.
Drive by, fix the signature of the constructor from QFutureInterface
(take const-ref, not plain ref -- it's eventually copied, so it
can keep the const), and add another internal constructor from
rvalue QFutureInterface that moves from it.
Change-Id: I9d61a9dd4d45f34942d8f34416baa118c0307390
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Rename Zlib module to adjust its name to the internal module naming
policy.
Change-Id: Ieb04842bd362a36fbf4247e3559b9907d29c28b8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
After discussion we decided to opt-out the UNICODE definintion
behavior. To disable UNICODE in user projects the
qt6_disable_unicode_defines function could be used.
Amends 5b64e5950c
[ChangeLog][CMake] Enables the UNICODE and _UNICODE definitions on
WIN32 platforms by default for all cmake projects to reflect the
qmake behavior. Use qt6_disable_unicode_defines function to disable
the default unicode definitions.
Pick-to: 6.1
Fixes: QTBUG-93895
Change-Id: Id70ff7dcf8c74f660ec851f8b950e1e3b94d9fb4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use __has_include instead QT_HAS_INCLUDE
Use __has_feature instead QT_HAS_FEATURE
Change-Id: If9b0af1f4386f7bcae6ca2fb911ffaba422750dd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The check is over-arching. is_move_constructible is sufficient;
we don't have to support "ridiculous" types that are copiable but
have deleted move operations (such types are fundamentally broken).
This is in line with the Move* (legacy) named requirements.
Change-Id: Idc7116b39013501b9be39628a4e7afd35fe15530
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Adds runtime CPU detection for Windows and macOS, and switches feature
detection of AES to runtime like for x86,
So far only on ARM64, since gcc doesn't do function versioning on ARM32,
but clang can, so it could be added later.
Change-Id: Ibe5d60f48cdae3e366a8ecd6263534ba2b09b131
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The qt6_add_big_resources command was dysfunctional whenever AUTOMOC was
enabled for a target.
We passed multiple object files with the --temp argument of the second
pass of rcc. We must pass exactly one. The spurious object file was the
one that's created by AUTOMOC. Turn off all of AUTOGEN for the C++
source file that's generated in the first pass of rcc.
Enable AUTOMOC for tests/auto/cmake/test_add_big_resource to cover this
situation.
Pick-to: 6.1
Fixes: QTBUG-85051
Change-Id: I6d2ce4953297db0751913456db0a4a126fe33f14
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's very likely that we'll have to run certain finalizer code for
targets other than executables.
Rename qt_finalize_executable to _qt_internal_finalize_executable so
it's internal.
Introduce a new function qt_finalize_target which will call the above
internal one when the target is an executable.
This should future proof the API so we have a hook to call code for
any user CMake project that intends to use Qt CMake API.
Change-Id: I03f6f4dcba22461351c247a20241ca7de1a59c1d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
With the introduction of grouped property changes, notification
calls in bindable properties might be immediate or deferred,
depending on the context. This patch documents that one must not
rely on immediate execution of functions given to subscribe()
and onValueChanged().
Change-Id: I26ec4dbbff17a44ab62037ba1da9ce34c77da972
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The latter forces users to build with RTTI enabled, as the typeid
use is in our public headers. Surprisingly this is also the case
even without instantiating the relevant template.
Change-Id: Icd18a2b85b250e0b77960797e5c43b7eaf9bd891
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
There was previously no way to compare QByteArrayView to with another
QByteArrayView case-insensitively without allocating memory.
[ChangeLog][QtCore][QByteArrayView] Added compare(), enabling case
sensitive and insensitive comparison with other QByteArrayViews.
Change-Id: I7582cc414563ddbde26da35a568421edcc649f93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Most of them go to qbytearrayalgorithms.h while the deprecated (inline)
version of qChecksum goes to qbytearrayview.h
In preparation for adding compare to QByteArrayView.
Change-Id: If7f65e9e7cd74838e11ebdb952309b811cef079d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using the permission API without guards for Android cause exception
on all other platforms, instead we can print a warning with the same
message if QT_DEBUG is defined to also make it less confusing for other
platforms.
Also, return QPermission::Authorized by default for platforms with no
implementation to this API.
Change-Id: Ie01a6a7f8b6a066685d32c861a56e9ded2c06410
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Allow linking all plugin initializer object libraries directly
into the final target (executable or shared library).
The finalizer mode is triggered when the project adds a call
to qt_import_plugins, as well when the project has an explicit
call to qt_finalize_executable or when it is defer called by
CMake 3.19+.
Otherwise the old non-finalizer mode is used, where each plugin
initializer object library is propagated via the usage
requirements of its associated module.
A user can explicitly opt in or out of the new mode by calling
qt_enable_import_plugins_finalizer_mode(target TRUE/FALSE)
The implementation, at configure time, recursively collects all
dependencies of the target to extract a list of used Qt modules.
From each module we extract its list of associated plugins and
their genex conditions. These genexes are used to conditionally
link the plugins and the initializers.
Renamed QT_PLUGINS property to _qt_plugins, so we can safely query the
property even on INTERFACE libraries with lower CMake versions.
QT_PLUGINS is kept for backwards compatibility with projects already
using it, but should be removed in Qt 7.
The upside of the finalizer mode is that it avoids creating link
cycles (e.g. Gui -> SvgPlugin -> Gui case) which causes CMake to
duplicate the library on the link line, slowing down link time as well
as possibly breaking link order dependencies.
The downside is that finalizer mode can't cope with generator
expressions at the moment. So if a Qt module target is wrapped in a
generator expression, it's plugins will not be detected and thus
linked.
Task-number: QTBUG-80863
Task-number: QTBUG-92933
Change-Id: Ic40c8ae5807a154ed18fcac18b25f00864c8f143
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
After commit 3966b571 the function was kinda broken already, though
this got unnoticed since it was not covered by an the auto-test.
This commit adds another test case with Windows native separators
and removes the use of QDir::fromNativeSeparators. Instead use the
original code from QDir::fromNativeSeparators to replace the backslashes.
Pick-to: 5.15 6.0 6.1
Change-Id: I190560d0e75cb8c177d63b142aa4be5b01498da2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* Use the new QFlags::toInt() instead of an explicit cast.
* Don't apply ~ to an enumerator and then convert the result to an
int; instead, convert the enumerator to int and then bitwise negate it.
The former is going to break in an upcoming commit.
Change-Id: I3a798d61452891d2f61f84e2d8e17237f47c5659
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Either the mix of futex and atomic, or the mix of 32-bit futex and
64-bit atomic doesn't work. In any case, the existing code leads to
bad behavior.
Pick-to: 6.1 5.15
Fixes: QTBUG-92188
Change-Id: Icc6ba28d6e2465c373d00e84f4da2b92c037e797
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I53eaaea149324d2495e794ba8bd58544e648e48e
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A delayed close should only be completed in the _q_bytesWritten() slot
as a confirmation of a successful write operation on the socket.
Otherwise, a failed write operation may cause the socket to be closed
unexpectedly within the waitFor...() function, which may result in a
malfunction.
Change-Id: I14cff26734f64a89090b6b5c13037466a6400597
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Instead of compiling the plugin initializers as part of a user
project, pre-compile them as object libraries while building Qt.
The installed object libraries can then be used with
target_sources(qt_module INTERFACE $<TARGET_OBJECTS:plugin_init>)
so that they are linked into the final executable or shared library
via qt module usage requirement propagation.
This reduces the build times of user projects.
The link line placement of the object files should be correct for all
linux-y linkers because the only dependency for the object files is
Core and the Gui -> plugin -> Gui -> Core cycle does not hamper that
from empirical observations.
As a consequence of the recent change not to link plugin initialization
object files into static libraries, as well not having to compile the
files in user projects, we can get rid of the
_qt_internal_disable_static_default_plugins calls in various places.
A side note.
Consider a user static library (L) that links to a Qt static library
(Gui) which provides plugins (platform plugins).
If there is an executable (E) that links to (L), with no direct
dependency to any other Qt module and the intention is that the
executable will automatically get the platform plugin linked,
then (L) needs to link PUBLIC-ly to (Gui) so that the plugin usage
requirements are propagated successfully.
This is a limitation of using
target_sources(qt_module INTERFACE $<TARGET_OBJECTS:plugin_init>)
which will propagate object files across static libraries only if
qt_module is linked publicly.
One could try to use
target_link_libraries(qt_module
INTERFACE $<TARGET_OBJECTS:plugin_init>)
which preserves the linker arguments across static libs even if
qt_module is linked privately, but unfortunately CMake will lose
dependency information on Core, which means the object files might be
placed in the wrong place on the link line.
As far as I know this is a limitation of CMake that can't be worked
around at the moment.
Note this behavior was present before this change as well.
Task-number: QTBUG-80863
Task-number: QTBUG-92933
Change-Id: Ia99e8aa3d32d6197cacd6162515ac808f2c6c53f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The use of QT_OVERLOADED_MACRO combined with pedantic warnings would
result in
warning: must specify at least one argument for '...' parameter of
variadic macro [-Wgnu-zero-variadic-macro-arguments]
when used with a single argument, as the QT_VA_ARGS_COUNT macro would
end up not passing anything to the last ... argument of the helper macro
QT_VA_ARGS_CHOOSE.
To work around this we extend the arguments passed to QT_VA_ARGS_CHOOSE
by one, adding a zero-count, so that the variadic parameter always has
at least one argument.
Unfortunately this doesn't give us a count of 0 if a overloaded Qt macro
is used without arguments, due to __VA_ARGS__ always being treated as an
argument to QT_VA_ARGS_CHOOSE, even when empty, due to the comma after it.
The result is that we end up calling the 1-argument macro for this case
as well.
Getting a correct zero-count, for both MSVC and GCC/Clang, without using
GCC extensions, is quite involved, so we're opting to live with this
limitation. See https://stackoverflow.com/a/62183700 for details.
Fixes: QTBUG-93750
Pick-to: 6.1
Change-Id: Ib7b26216f36a639642a70387e0d73223633ba6b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The BASE argument of qt_add_resources now denotes the root point of the
alias of the file. Before, BASE was merely prepended to every file that
got passed to qt_add_resources.
Old behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "images/button.png")
Alias is "../shared/images/button.png", and pro2cmake generated
QT_RESOURCE_ALIAS assignments to fix this.
New behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "../shared/images/button.png")
The alias is "images/button.png". No extra QT_RESOURCE_ALIAS assignment
is needed.
The new behavior is in effect for user projects and for Qt repositories
that define QT_USE_FIXED_QT_ADD_RESOURCE_BASE. Qt repositories will be
ported one by one to this new behavior. Then the old code path can be
removed.
Pick-to: 6.1
Task-number: QTBUG-86726
Change-Id: Ib895edd4df8e97b54badadd9a1c34408beff131f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use QFlags::testAnyFlag instead of relying on implicit conversions.
Change-Id: I7ac8149535ad28e47fbf3e250042892bdf8c3a72
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Use toInt(), or an explicit cast. (I don't quite know why an atomic int
is involved here, but anyways, it makes these casts necessary.)
Change-Id: I8816ef96bd69a6f3e3f8e025e567e3451069462c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QItemSelectionModel has the property selectedIndexes with
the notification signal selectionChanged. When a row is deleted
or inserted above the current selection, the row number of the
current selection changes and thus the return value of
selectedIndexes changes. This should trigger its notification
signal.
This signal was not emitted. This patch fixes this and
adds a unit test to verify this.
[ChangeLog][Important Behavior Changes][QtCore]
QItemSelectionModel now emits the selectionChanged signal
if only the indexes of the selected items change.
Fixes: QTBUG-93305
Change-Id: Ia5fb5ca32d658c9c0e1d7093c57cc08a966b9402
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
"Cherry-pick" of C++2b's std::to_underlying.
[ChangeLog][QtCore][QtGlobal] The qToUnderlying function has been
added, to convert an value of enumeration type to its underlying
value.
Change-Id: Ia46bd8e4496e55174171ac2f0799eacbcca02cf9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The boostrap library is built with exceptions disabled, and its
sources include qglobal.cpp. Therefore, the file must work when built
w/o exceptions.
Amend/partially revert 282b724808 with
the necessary fixes.
Driveby, cleanup an unnecessary QT_THROW (just throw, if we do have
exceptions).
Change-Id: I370c295c21edd3d81a9fa670e60909b29d1c68aa
Pick-to: 6.1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The dependencies to moc, uic and rcc have already been handled by
qt_manual_moc(), qt_enable_autogen_tool() and
_qt_internal_process_resource().
This allows not building some of the debug executables in a
multi-config scenario.
Task-number: QTBUG-88414
Change-Id: I6c162721f3ddf6b4b410345ad012073abbdfd9df
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Before, building ${target}_make_apk always re-built the apk, instead of
rebuilding the apk only when inputs changed. This patch fixes that by
moving the creation code from a custom target to a custom command with
proper dependencies.
The androidtestrunner tool now does not check for the existence of an
apk anymore and always runs the make command that is supposed to build
the apk.
The ${target}_prepare_apk_dir target is not needed anymore by the Qt
build but is still used by Qt Creator's Android support. Add a
clarifying comment.
Fixes: QTBUG-93431
Change-Id: I00d65d616fef9511b03b65f879c4bc6cb92dfc30
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The documentation for QCoreApplication::exit() even refers to it as
such. Instead of refactoring the documentation to explain that it isn't,
just make it a slot and do the same for the other classes.
Complements 2e6c37fe51.
[ChangeLog][QtCore][QEventLoop] exit() is now a slot, like quit().
[ChangeLog][QtCore][QThread] exit() is now a slot, like quit().
Change-Id: Ic42004c9bf71440eb433fffd167f4a1b89bcac80
Reviewed-by: David Faure <david.faure@kdab.com>
There's no need of converting a QFlags to int in openExternalFile's
signature; just use the flag.
Also, avoid an implicit QFlags->bool conversion by using testAnyFlag.
Change-Id: Ia2d560bce235c842745d8a6a5fb5d8ac0851fc47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Turn some implicit conversions into calls to QFlags::testAnyFlag.
Change-Id: I755f8a1afb1ff02e823e747e021e9744d68b4f62
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Turn some implicit conversions into calls to QFlags::testAnyFlag.
In one case, move some code using QFlags operators *after* such
operators have been declared by the right macro.
Change-Id: Ib5713f028ce74d1c9054b87cc12eea5715f2bc94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Turn a couple of implicit conversions into calls to QFlags::testAnyFlag.
Change-Id: I21a0b4c1644986a98a2d0d54ae4b95f9fdc92841
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no reason to be storing `int` in the array data header and
then using it as a QFlags. Just store the QFlags.
Change-Id: I78f489550d74d15a560dacf338110d80a7ddfdd2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Turn an implicit conversion into a call to QFlags::testAnyFlag.
Change-Id: Idbd80bb6a9b5d84952b76d8d7544f617fe693b91
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Giuseppe D'Angelo
Thiago Macieira
Alex Trotsenko
Nodir Temirkhodjaev
Joerg Bornemann
Alexey Edelev
JiDe Zhang
Allan Sandfeld Jensen
Alexandru Croitor
Andreas Buhr
Tor Arne Vestbø
Mårten Nordheim
Assam Boudjelthia
Karsten Heimrich
Tasuku Suzuki
Li Xinwei