2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I3594b1ebede4819e3b0159ea43635fa947b8e929
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I1d866ec703b81cde0c01335ae13b503bccca3d7d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: Iacc45c6bad54c4356e7db1c489897a2a74d2936a
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I5608d71782b47f6aa0cfbdbb077980779052bc41
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: Ib92cf34d4cd022ccba245508d992ab01099cd97b
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: Ief817a31685e23af57fdcc0909c6e605072d83fd
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: Ie48dd98fa8eae796e31de3afc34e09c27e3b78cd
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I4a2180c9e13140bf669753318189a58b7959b725
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I96335a24c40444d09e5069898b6bd49499550156
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I673677473f4d20fcaca45415d43a461db38654cb
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: If11065fe3c0036dcf27a25b251e762f6051f3248
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I61373fced8dbee0e0d8a85c98613cf0a322ec925
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: Ibac6b71c84e500fdc0d9b3487d1fa93a71dfad49
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: Iea870711410dee1347f1020a6f7afc037e520825
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The DNS servers from Google and CloudFare are probably stable enough
over the long-term.
Change-Id: I455fe22ef4ad4b2f9b01fffd17c748dc1233bc1b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If the file exists, we are using systemd-resolved, so let's try directly
using the nameservers it uses.
Change-Id: I455fe22ef4ad4b2f9b01fffd17c7476a2385bf4b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is a major simplification to use only one column in the QtTest
tables for the results, which makes it far easier to read the code as
well as to add more record types.
Change-Id: I455fe22ef4ad4b2f9b01fffd17c745d13c9c4037
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This will allow making lookup() require positive results only.
Change-Id: I455fe22ef4ad4b2f9b01fffd17c740e36002d25e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When using writeDatagram(QNetworkDatagram), the sendmsg() call on
FreeBSD is failing. It works on Linux and on macOS, so my guess is that
IP_PKTINFO works to set the sender address but IP_SENDSRCADDR is not
allowed in this context for some reason.
Before:
recvmsg(5,{{ AF_INET 127.0.0.1:19530 },16,[{"H\M-p\^A\0\0\^A\0\0\0\0\0\^A\tso"...,49}],1,{{level=IPPROTO_IP,type=IP_RECVDSTADDR,data={0x7f,0x00,0x00,0x01}},{level=IPPROTO_IP,type=IP_RECVTTL,data={0x40}}},48,0},0) = 49 (0x31)
sendmsg(5,{{ AF_INET 127.0.0.1:19530 },16,[{"H\M-p\M^@\^C\0\^A\0\0\0\0\0\^A\t"...,49}],1,{{level=IPPROTO_IP,type=IP_RECVDSTADDR,data={0x7f,0x00,0x00,0x01}}},24,0},MSG_NOSIGNAL) ERR#22 'Invalid argument'
After:
recvmsg(5,{{ AF_INET 127.0.0.1:16018 },16,[{"\^U\M-X\^A\0\0\^A\0\0\0\0\0\^A\t"...,49}],1,{{level=IPPROTO_IP,type=IP_RECVDSTADDR,data={0x7f,0x00,0x00,0x01}},{level=IPPROTO_IP,type=IP_RECVTTL,data={0x40}}},48,0},0) = 49 (0x31)
sendmsg(5,{{ AF_INET 127.0.0.1:16018 },16,[{"\^U\M-X\M^@\^C\0\^A\0\0\0\0\0\^A"...,49}],1,{},0,0},MSG_NOSIGNAL) = 49 (0x31)
Pick-to: 6.7
Change-Id: I455fe22ef4ad4b2f9b01fffd17c77565e230ce31
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
0x80 is too big for a signed char (range is -0x80 to 0x7f).
Pick-to: 6.7
Change-Id: I455fe22ef4ad4b2f9b01fffd17c7746f4ea3c536
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Commit 8d127c5737 refactored this code
from QByteArray::split to manually iterate over the list (and
QStringTokenizer doesn't work for QByteArray), so we missed the last
element in the iteration.
Pick-to: 6.7
Fixes: QTBUG-124580
Change-Id: I455fe22ef4ad4b2f9b01fffd17c867f6ed350af7
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I7fd9005ef66c11f640a50f0db468cdcb07eb621f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I432e7ced3e49b570cf9e4057fe98411271693750
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: Ic189b1c55b6bdf0397636b3ae9555cc38b60fc48
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I1cd2d45c54fbeb2b89accc257f2ec5b57f20c013
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
These reveal a roughly factor of six slow-down for two valid date
formats and a roughly factor of twelve slow-down for an invalid one.
Pick-to: 6.7 6.5 6.2
Task-number: QTBUG-124465
Change-Id: Ibd21e43d4c64aced33ba5b21e4602e0dc4fd7548
Reviewed-by: Mate Barany <mate.barany@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I2a3f400e58f86cbc339c355977da784ef5c24800
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
As it is, when a QWindowContainer's embedded window gains focus, the
container doesn't report having focus and QApplication::focusWidget()
will be nullptr. This is because when the embedded window gets focus,
the container will clearFocus() on the old focus widget. To be able
to set focus to the next focus widget (eg: as a result of a key tab
event sent to the container's parent window), the container checks
if its embedded window is already focused, and if so, forwards focus
to its nextInFocusChain(). That is why it keeps track of the (old)
focusWindow.
The problem with the current behavior is that if we want to make focus
navigation via key tabbing work and return focus *from within the
window* back to the normal widget focus chain, the encapsulating widget
needs to remember its focusWidget(), in this case the window container,
in order to be able to set focus to the next/PrevInFocusChain().
That is why we now set the focus to the window container whenever its
contained window gains focus. This means that
QApplication::focusWidget() will be the window container if the contained
window has focus. In this way, we don't have to call clearFocus() on the
old focus widget, or keep track of focus windows, because calling
setFocus() on the container will handle that.
It is worth noting and probably documenting the following caveats:
- even though the window container will be the
qApp's focusWidget(), it won't directly handle keyboard events, but the
contained window will
- we won't be able to respect the window container's focusPolicy in this
case, since the contained window will be activated from interactions
inside it, no matter the container's focusPolicy
[ChangeLog][QtWidgets][QWindowContainer] The window container will
become focused if the contained window becomes focused. This
implies that the QApplication::focusWidget() will be the window
container if the contained window is the focus window.
Task-number: QTBUG-121789
Change-Id: I1050afc59780f7189a0d8e8c95bff27f96f38dbc
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
I neglected to update the CLDR dateconverter code when I expanded the
range of forms we support for display of a timezone. Even that
expanded range doesn't cover all the cases CLDR does, but we can at
least approximate each of CLDR's options by the closest we do support.
Make matching changes to how the Darwin backend for the system locale
maps its ICU-derived formats to ours.
This in practice changes all locales previously using t (abbreviation)
as zone format to use tttt (IANA ID) instead. Test data updated to
match.
[ChangeLog][QtCore][QLocale] Date-time formats now more faithfully
follow the CLDR data in handling timezones. In most cases this means
the IANA ID is used in place of the abbreviation.
Change-Id: I0276843085839ba9a7855a78922cffe285174643
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test assumes either windows or unix line endings, however
wasm can run on either system, causing problem with
git config core.autocrlf=true
Fix the test so that on wasm we correct filesize if
necessary
Change-Id: Ieb86c5388aa931d8ca06822e1c09a2c55801de67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
There was a discrepancy that the multi-arg arg() overload would accept
any number of digits in the placeholder, resolving up to value 999
(e.g., %000001 was interpreted as placeholder #1), but the single-arg
arg() overload only supported exactly one or two digits. The single-arg
behavior was documented, so use it.
[ChangeLog][Important Behavior Changes] The QString::arg() overload
taking multiple QString-like arguments is now fixed to interpret
placeholders like the other arg() overloads: it will find at most two
digits after the '%' character. That is, the sequence "%123" is now
interpreted as placeholder #12 followed by character '3' (verbatim).
Pick-to: 6.7
Fixes: QTBUG-118581
Change-Id: I455fe22ef4ad4b2f9b01fffd17c767a948d41138
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
When adding/fixing parts earlier it was missed that it was not handling
the _unsupported_ case, when authentication is not handled and there is
no resend. But there _is_ a challenge header.
Pick-to: 6.7 6.6 6.5
Fixes: QTBUG-123891
Change-Id: I21470df0ce2528bad3babffc6e9f19b7afd29d20
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We'd end up trying to takeFirst() from an empty QStringList.
[ChangeLog][QtCore][QProcess] Fixed a bug that would cause
startCommand() to crash if passed a string that was empty or contained
only whitespace characters.
Fixes: QTBUG-124512
Pick-to: 6.5 6.6 6.7
Change-Id: I455fe22ef4ad4b2f9b01fffd17c7689095c39272
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The tolerance is too low, and fails with Xcode 15 builds of Qt.
Pick-to: 6.7
Change-Id: I5755d33b052a43eb4af7ea29ec54746f73e3c42c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
We used to set a private _q_foreignWinId property on QWindow when
creating foreign windows, and this was the mechanism which we then
passed the foreign winId to the platform plugin.
With c585802e94 this was removed,
since we now were passing the winId through via explicit QPA
APIs, and since 0c6911e5cd removed
the ability to explicitly destroy() a foreign window.
But when closing a QWindow, we destroy both the window itself,
and all its children, including foreign windows. In this case
we still want to support recreating the foreign window, for
example when the parent window is shown again. To enable this
we restore the _q_foreignWinId private property, but keep
the limitation of not being able to explicitly destroy a
foreign window.
Pick-to: 6.7 6.5
Fixes: QTBUG-124160
Change-Id: Ia885ba9f043e64fb21eedd2b4c344679726f1b5c
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
There were two of it. The "year-match-*" tests have two year fields,
one four-digit the other two-digit, and deal with whether they match.
The second year-match-1999 had, however, only a "yy" year format; it
in fact belongs to the "just-yy-*" family that follows. So rename it.
Amends commit 5108192f67 which landed in
6.7.
Pick-to: 6.7
Task-number: QTBUG-107185
Change-Id: Ibfe0c33cb00dc068d0f670d27c43ec4dc4550c05
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Follow-up to commit ae6186c7e8
* require the feature in headers that should only be seen when it's
enabled,
* expose the auto-test to being run even when the feature is disabled
(the parts of that depend on the feature have needed #if-ery) and
* fix the Darwin-specific test's misguided #if-ery.
Pick-to: 6.7 6.5
Task-number: QTBUG-108199
Change-Id: I398cf44c33ffdcb4bb04f54a9d8ccfef68741e4e
Reviewed-by: Mate Barany <mate.barany@qt.io>
They're not wanted and Axivion (SV71) grumbles about the lack of copy
and move operators and constructors otherwise. Do the same in all
derived classes. Some of these needed their default constructors made
overt as a result. Similar for QAbstractFileEngineHandlerList.
Task-number: QTBUG-122619
Change-Id: Iff016940f8c4884bd65dd781354b9bcda9b7cdd8
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
The color editor factory example is removed and part of the codes are
used as snippets.
Fixes: QTBUG-119985
Pick-to: 6.7 6.6
Change-Id: I421e473e7db09a5af7543b80b87a338d8ff2ab7e
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
When a date string contains day of the week, day of the month, month
and two-digit year, it was still possible to get a conflicting result
in the default century instead of a consistent result in the next (in
fact present) century.
The actual logic needed to get the right year has to take into account
all date fields. This is all worked out already in actualDate(), so
delegate to it instead of trying to make do with just the year info.
Pick-to: 6.7 6.6 6.5
Fixes: QTBUG-123579
Change-Id: Id057128d8a0af9f3a7708d0ee173f854bb1a2a8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Dennis Oberst <dennis.oberst@qt.io>
Both qlocale_mac.mm and dateconverter.py were mapping the CLDR am/pm
indicator, 'a', to the Qt format token 'AP', forcing the indicator to
uppercase. The LDML spec [0] says:
May be upper or lowercase depending on the locale and other
options.
[0] https://www.unicode.org/reports/tr35/tr35-68/tr35-dates.html#Date_Field_Symbol_Table
We don't support the "other options" mentioned, but we can at least
(since 6.3) preserve the the locale-appropriate case, instead of
forcing upper-case. As such, this change is a follow-up to
commit 4641ff0f6a
Changes locale data, as expected, to use "Ap" in place of "AP" in
various formats in the time_format_data[] array.
[ChangeLog][QtCore][QLocale] Where CLDR specifies an am/pm indicator,
the case of the CLDR-supplied indicator is used, where previously
QLocale forced it to upper-case.
Change-Id: Iee7d55e6f3c78372659668b9798c8e24a1fa8982
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The LDML spec includes a 'b' pattern character which is like the 'a'
pattern, for AM and PM, but would rather use noon and midnight
indicators for those specific times. We don't support those and using
am/pm will be right enough of the time to be better than simply
discarding this option, if it ever gets used (which it currently
isn't), so treat as an alias for 'a'. No locale in CLDR currently uses
this.
CLDR also has a 'B' specifiers for "flexible day periods", including
things like "at night" and "in the day". At present only zh_Hant uses
'B'. As a result, this change only affects zh_Hant's formats for time
and datetime, which only zh_Hant_TW uses - zh_Hant_HK overrides them
to use am/pm markers and zh_Hant_MO inherits that from
zh_Hant_HK. Based on this and user feed-back, I've opted to treat 'B'
as another synonym of 'a'.
This removes an entry from the time_format_data[] table (it happened
to occupy one whole twelve-character row), causing many other locales'
offsets into that table to be shifted by 12. Only zh_Hant_TW has an
actual change to which entry in the table it uses.
Added a test-case.
[ChangeLog][QtCore][QLocale] CLDR's 'B' (flexible day period, e.g. "at
night" &c.) field, not currently supported, is now handled as a
synonym for the AM/PM field 'a', instead of leaving the B as literal
text. Only affects zh_TW at present.
Fixes: QTBUG-123872
Change-Id: I6ba008c0a048190bf7af8c7df7629a885b05804f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I7bd841574c07d73416f9f63d564fe31a8475fa9e
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls from testing deletion of the focusWidget, testing
reparenting of the focus widget, testing setEnabled(false) and testing
clearFocus sections.
Task-number: QTBUG-121488
Change-Id: I7e46ddb31bd7dbc0492d057d8d84846db8c873aa
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I5d6871b192b5c4dda00ef912a806e62a529b629e
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I2841522f533c7679cc9c254c5fe7c37f5632fd30
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I4a0d026fbe5da014723254bb9eb8d614cf50232f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
When CSS has been used to customize the text color, render the bullet
with the same color. This is consistent with web browsers, and with
Qt Quick rendering.
In QTextDocumentLayoutPrivate::drawListItem(), the pen color is the
text color, so use it instead of brush color.
Add a baseline test for lancelot: the background and general text
are customized, then some list items are customized further, and
some of them have colored text spans. Repeat with different styles
of numbered and bullet lists and checklists.
Fixes: QTBUG-2188
Task-number: QTBUG-213
Task-number: QTBUG-57833
Pick-to: 6.5 6.7
Change-Id: I71e84d00172e4b37aef57c8badd2ec43c10113d9
Reviewed-by: Sami Shalayel <sami.shalayel@qt.io>
Pass the pointer to the current state, not a pointer to a pointer to it.
[ChangeLog][QtCore][QStringConverter] Fixed a bug involving moved
QStringEncoder/QStringDecoder objects accessing invalid state.
Amends 122270d6be.
Done-with: Marc Mutz <marc.mutz@qt.io>
Pick-to: 6.7 6.5
Change-Id: I70d4dc00e3e0db6cad964579662bcf6d185a4c34
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We weren't doing the decoding from UTF-16 to UTF-32, so weren't catching
invalid code sequences
[ChangeLog][QtCore][QXmlStreamWriter] The class now rejects writing
UTF-8 and UTF-16 invalid input (improper code unit sequences).
Task-number: QTBUG-122241
Pick-to: 6.5 6.6 6.7
Change-Id: I83dda2d36c904517b3c0fffd17b42d17c637fdc4
Reviewed-by: Mate Barany <mate.barany@qt.io>
We were iterating over code *units* and that yielded wrong results. The
one from the bug report was simply caused by the fact that
QUtf8StringView::value_type is char, which is signed on x86, so the
expression:
*it <= u'\x1F'
was true for all non-Latin1 content.
But in attempting to fix this, I needed to do the proper UTF-8 decoding,
as otherwise we wouldn't catch non-Latin1 sequences and such.
[ChangeLog][QtCore][QXmlStreamWriter] Fixed a bug that caused the class
to fail to write UTF-8 strings with non-US-ASCII content when passed as
a QUtf8StringView.
Fixes: QTBUG-122241
Pick-to: 6.5 6.6 6.7
Change-Id: I83dda2d36c904517b3c0fffd17b42bbf09a493d0
Reviewed-by: Mate Barany <mate.barany@qt.io>
Replace public friend operators operator==() and operator!=() of
QDeadlineTimer to friend method comparesEqual().
Replace public friends operator<(),<=(),>(), etc of QDeadlineTimer to
friend method compareThreeWay().
Task-number: QTBUG-120304
Change-Id: Ib855ccac9b31b54fe28b822f2985154608fefa27
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Remove the Group Box Example from the repository, eliminating the
associated example codes, screenshot, and documentation file. The
only relevant portion used in the QGroupBox class has been relocated
to the existing snippet file. Additionally, all references to this
example across other files have been removed.
Fixes: QTBUG-119980
Pick-to: 6.7 6.6
Change-Id: I66f9dd9dab1fe64f2d20424af3acd135201827d2
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Virtually all callers of this function (will) pass rvalues, so take
the std::function by value (reaping C++17 guaranteed copy elision) and
std::move() into the member variable ("perfect sink").
Like for many owning types, moves are much cheaper than copies for
std::function, because the external state is merely tranferred between
objects, and not copied.
Amends e560adef21.
Pick-to: 6.7
Change-Id: I269b54e51ba09ac595ac4e4f255209778819adad
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
HttpTestServer::Handler is declared to take the first argument by
reference to const, not by value, so use the same parameter passing
for the lambdas passed to setHandler().
Avoids copying the (rather large) argument when invoked through the
std::function wrapper, and silences clazy-function-args-by-ref.
Pick-to: 6.7
Change-Id: I726d0b98a7fcb3b1b33c5bde203035f593c39bdd
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Move some deleteLater() calls to before the first QCOMPARE/QVERIFY
macros, so they get executed even if the macros return on failure.
This isn't an all-encompassing solution, but I lack the time to port
all this to smart pointers, and this is some improvement.
As a drive-by, port QVERIFY(opt.has_value()) to QCOMPARE(opt, nullopt).
Task-number: QTBUG-120307
Pick-to: 6.7
Change-Id: Ia5a2cabd273a779938b22badc91b109fcc545203
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I5b429dcaa47cd179785345f9f7a80648574670dd
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
When depending on Qt's font merging for providing glyphs for certain
languages, there are currently some drawbacks. For one, you will
typically get a system font which might not fit together with the
main font of the application.
In addition, you might get some glyphs from one font and other from
another (typically for Chinese where the character sets are so large
that fonts will often only implement parts).
And finally, you may get the wrong glyphs for writing systems with
regional differences, if your application is e.g. written in Japanese
and then run on a Chinese system, you might get Chinese versions of
characters which are shared between the languages.
Without language-based font matching in Qt, there's no silver bullet
for fixing this. This patch introduces API which makes it possible for
users to provide the solution themselves, either by selecting
application-provided fonts as fallbacks for certain scripts or by
hardcoding system fonts for a specific language.
[ChangeLog][Fonts] Added API to override default fallback font
families for specific scripts.
Task-number: QTBUG-121131
Change-Id: I23ee17b7dfe1c1e481c87cc67a05a0522841b598
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Replace public operators operator==(), operator!=() of
QItemSelectionRange class to friend methods comparesEqual().
Use QT_CORE_REMOVED_SINCE and removed_api.cpp to get rid of current
comparison methods and replace them with a friend.
Task-number: QTBUG-120304
Change-Id: Ideff990c942d5ee1c89a93ac2081cc5d7067b23f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Also add test files for emscripten platform to build
Change-Id: Ief03e44a4e3f3339a65453469a7ae0a6969f2252
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
We supported CSS 'border-width', 'border-style' and 'border-color'
for HTML tables since 8a9bec35fb0c60a0e5990c1a12ffe6f39fdbf2d.
Now we also support the 'border' property, which is shorthand to
set all four borders' width, style and color.
Fixes: QTBUG-123167
Pick-to: 6.7 6.6
Change-Id: I5f29b94ab9facf412a9c230d554efb5c69368b6b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Set focus on the test window so that the tested widget doesn't have it.
Remove the "PublicWidget" hack, we have public QWidget APIs to find the
next widget in the focus chain that we can use to transfer focus
reliably. Use TabFocusReason to maintain existing behavior, and to
test that widgets that handle that specifically appear correctly. Clear
the focus on the test widget by setting it back to the window after
taking the "focused" snapshot.
Add QCOMPARE and QVERIFY to assert that the test is in the right state
before taking screenshots.
Pick-to: 6.7
Change-Id: Icef6ce1bb1c63c9f6cde7d0ddca82e693cace420
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Replace public friend operators operator==(), operator!=() of
QNativeIpcKey to friend methods comparesEqual() and
Q_DECLARE_EQUALITY_COMPARABLE macro.
Task-number: QTBUG-120304
Change-Id: If18d86fb18e44f8d2210cba7ca93e4ac478a2a48
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Replace public friend operators operator==(), operator!=() of
QKeyCombination to friend method comparesEqual() and
Q_DECLARE_EQUALITY_COMPARABLE_LITERAL_TYPE macro.
Task-number: QTBUG-120304
Change-Id: I679f3fa5fcc4c675a763cc5a5fe0e0880439a64f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
We want to get rid of the other one, it's all internal
API anyway.
Task-number: QTBUG-102855
Change-Id: I2b621c20f4dd7c8bf5f07db8db908c2b7b86976f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We are selecting a subset of the tests for batching/CI,
however this is done for the WASM configuration which
interferes with non-batched tests.
- we can only build and run tests which are in the
batching subset
- we are enabling threading tests which breaks the
no-thread configuration.
Add QT_BUILD_WASM_BATCHED_TESTS and enable for WASM and
batching. There's then no restrictions on which tests
can be selected for CI.
Change-Id: I59a67b63e80cd00676cb28f916951d2a52b0ee2c
Reviewed-by: Jøger Hansegård <joger.hansegard@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
When a slot is connected to the modelReset signal before the model is
set on the view, then such a slot might try to resize the columns or
rows to fit the contents before the view had a chance to perform layout
work.
In that case, the while-loop that calculated the size hint of a rows
(or column) by checking the size hint of each cell might not exit, as
cached information about visual indexes would be invalid.
To prevent this, don't loop over the cells if the actual last row/column
of the model (after the reset) is less than the first (cached) visible
row/column. Also, make sure we increase the counter for number of
rows/columns processed with each iteration.
Add a test (that loops infinitely without the fix, resulting in the
test being killed by the framework), and make the 'actual' variables
constant for clarity.
Fixes: QTBUG-124301
Pick-to: 6.7
Change-Id: I0adb2f1e8a1e78760ef7c19e9686c9572eca8be6
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
While <DIGIT>+<Character> is not a valid identifier by itself in the C++
language, it might become one when using it with the token pasting
operator.
This risks confusing some number literals with suffix as Identifiers,
but those are currently not supported anyway, so this shouldn't break
anything that is currently working.
Fixes: QTBUG-87219
Fixes: QTBUG-124288
Pick-to: 6.7
Change-Id: If73255cc0e6649bc90c52b1d177aac8ff975ae69
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Some tests are flaky on macOS because the background desktop shows
through the rounded corner of the test window. We cannot reliably
control this on each platform, so instead make the test window a
secondary window with a second, fullscreen and frameless window as the
transient parent. This way, we have full control over the background
pixels that might show through (semi-)transparent parts of the test
window.
Pick-to: 6.7
Change-Id: I44b7e834797b46fa8b44d776f6b91c99536a6cc9
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QVariant::toUInt() cannot convert from those two, so we always ended up
with 0, producing lots of duplicated test rows.
Pick-to: 6.7
Fixes: QTBUG-124349
Change-Id: Ie28eadac333c4bcd8c08fffd17c5a3e39a2cc3f6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We wanted to test the (min,max) of each of the two types, but one of the
four combinations wasn't correctly done.
Task-number: QTBUG-124349
Pick-to: 6.7
Change-Id: Ie28eadac333c4bcd8c08fffd17c5a3ccb4205139
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Match the standard one-test-per-directory setup.
Change-Id: I0e29e3c5626ef5f739b1680d53a2a74f0c77f9be
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Jøger Hansegård <joger.hansegard@qt.io>
Code that sets a test function up should not be fallible, or should be
designed to log the failure. In tst_moc this is not the case --
QFile::open is called from within a nested lambda. If that fails, print
the error and return an empty optional.
Task-number: QTBUG-123623
Change-Id: I8372a6ac7dc22e68d145fa2215fe04ba682ac81b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By removing fs::directory_options::skip_permission_denied which isn't
available on VxWorks.
It's not strictly needed for the benchmark. I had added it to test
locally by listing some dirs under '/' (not all of them are readable for
users), and saw no reason at the time to remove it. The benchmark itself
listing dirs in the qtbase source dir tree.
Pick-to: 6.7
Task-number: QTBUG-115777
Change-Id: I4e68d01abd707dbf553f0a5832739ef0f4c9d585
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If QFile::open() fails in any of the these helper functions, the test
should fail.
Task-number: QTBUG-123623
Change-Id: I3e4d65eccd3be32eed673d9607ef468ddc0fd6e5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Problems:
* mmap of size 0 works, add test in QFSFileEnginePrivate::map to
make sure wasm platform behaves as the other platforms
* qwe// is a valid filename on wasm, QSKIP test
* applicationFilePath does not exist on wasm.
* /dev/zero does not exist on wasm, file bug, skip test
* blocking pipes do not exist on wasm, QSKIP test
* socketpair does not exist on wasm, QSKIP test
Change-Id: I1705c543782cbcb92a7ebed2fc2792613524c686
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This amends commit 394788c68e (its
ChangeLog applies to this commit too). That fixed sorting of UTF8-to-
UTF16, but when adding more unit tests, I've discovered that some UTF-16
strings also sorted incorrectly. There were two problems:
First, we were assuming that we could rely on the UTF-16 length as a
proxy for the UTF-8 one, but that's not true for some cases:
* both 1-, 2- and 3-codepoint UTF-8 sequences are 1 codepoint
in UTF-16, so some strings would have identical UTF-16 length
* 4-codepoint UTF-8 sequences shrink to 2-codepoint UTF-16 ones
(2:1) but 3-codepoint UTF-8 sequences shrink to 1 (3:1), so
some strings would be longer in UTF-16 but shorter in UTF-8.
Second, QtPrivate::compareStrings performs UTF-16 codepoint comparisons
not Unicode character ones, so surrogate pairs were sorting before
U+E000 to U+FFFF.
To fix all of this, we need to decode the UTF-16 string into UTF-32 and
calculate the length of that in UTF-8 to be sure we have the sorting
order right.
Since this is a slight behavior change with a performance penalty, I am
choosing to backport only to 6.7. The penalty mostly does not apply to
6.8 due to commit 61556627f2.
Pick-to: 6.7
Change-Id: If1bf59ecbe014b569ba1fffd17c4c4ddcc874aac
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
In some cases calls to QFile::open are made outside of a testfunction
(so we can't use QVERIFY), or even in standalone executables that are
executed by tests. Make them fail "visibly".
Change-Id: Iec4d56f6d874be16aa2e9ad6974eeec2a98caa3f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtGui][QColorSpace] Support for CMYK color spaces has been
added.
Change-Id: I2c684dbeee8b97fc90ca4e2a892349a7fa465d06
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
New comparison macros are used for following classes:
- QCborMap::Iterator
- QCborMap::ConstIterator
Replace public operators operator==(), operator!=(), operator!<(), etc
of classes to friend methods comparesEqual(), compareThreeWay();
Use *_helper methods to have an access to protected members of
QCborValueConstRef class from friend functions.
Task-number: QTBUG-120300
Change-Id: I71b6febaf3f31ea7ba668d91c375b0a7b6827d21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
New comparison macros are used for following classes:
- QJsonObject::iterator
- QJsonObject::const_iterator
Replace public operators operator==(), operator!=(), operator!<(), etc
of classes to friend methods comparesEqual(), compareThreeWay();
Use *_helper methods to have an access to protected members of
QCborValueConstRef class from friend functions.
Task-number: QTBUG-120300
Change-Id: I308e2c0a549ff186c1d6339b38e989b80dc388a3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because it causes issues in the CI
Pick-to: 6.7
Change-Id: I8cd232abf1c4ee1d9417a8bff9aa3bcf5f893e8f
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This fails on Android 8, and we want to get Android 8 bump into the CI.
Pick-to: 6.7
Task-number: QTBUG-124291
Change-Id: I179880c38d155df82bcb772f546104d956326647
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
It will return the minimumSize of the underlying QWindow.
The container can then be put inside QLayouts without risking to be
shrunk to a smaller size than the QWindow::minimumSize.
Whenever the QWindow::minimumWidth or QWindow::minimumHeight changes, we call QWindowContainer::updateGeometry(), which will make the layout re-query QWindowContainer::minimumSizeHint() again.
Task-number: QTBUG-121798
Change-Id: Ib7ece7d9d75f2e4964ca9042d8d8b95ce3b17739
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
qOverload was used only for ambiguous signals and slots with no
arguments. Connections to ambiguous slots made in widget designer's
signal/slot editor, lead to an unresolved ambiguity when compiling
the generated code in ui_xxx.h. One example is QLabel::setNum(), which
can either take a double or an int.
Always using qOverload is not an alternative, because signatures are
normalised. E.g. const QString & / QString can't be distinguished.
Add a map with all ambiguous signals and slots to customwidgetsinfo.cpp.
Hardcode the map, because uic lives in QtCore and can't access meta
objects of gui/widget classes.
Use this map in isAmbiguousSignal() and add isAmbiguousSlot().
Change OverloadUse enum into an enum class in language.cpp. Change
enum values to reflect the new condition for slots to use qOverload.
Rename existing enum values and remove default argument in
language::formatMemberFnPtr() to improve code readability.
Apply const T& syntax for all types starting with Q, except QSize and
QPoint.
Revert 94c16517b3, which was a hack
forcing for QLCDNumber::display() to a string based connection.
Add a new baseline to tst_uic, to test the above.
Fixes: QTBUG-93413
Task-number: QTBUG-124241
Pick-to: 6.7 6.6 6.5 6.2
Change-Id: I49ccc1688cfc08970cce3e56adf18e5ac49a77e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
On android documentation orientation changes are sent via
onConfigurationChanged callback. Previous implementation
based orientation detection to onSizeChanged callback.
That callback is not called when orientation turns 180 degrees.
i.e. between landscape and inverted landscape.
This fix adds detection to on onConfigurationChanged to catch
those cases.
Fixes: QTBUG-118887
Fixes: QTBUG-118236
Pick-to: 6.7 6.5
Change-Id: Ie2f81798de97e460de839f7ebfde9a9efa25909f
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Instead of having users traverse a ProxyModel hierarchy to
get to a QFileSystemModel to use the fileInfo(QModelIndex)
function, just let it be available with the roles.
Change-Id: I285347d1d85b4c6253fcb893737aa629a56e27fd
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
It was overlooked in testing, but it would emit a signal for new
incoming stream even if the server was just replying with HEADERS on a
stream the client had initiated. Or vice-versa.
Pick-to: 6.7
Change-Id: Ie7b3a45729a78106da1d8c058e15705cc7dcc53b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
QCommonStyle sets the font for a selected header section to bold.
This overrides the font weight a calling style might already have set,
e.g. when a style sheet is applied to explicitly set a weight for a
checked header section:
QHeaderView::section:checked {
font-size: 20px
font-weight: normal
}
Since setting the weight on a font sets the respective resolve-mask
bit, we can avoid overwriting a weight that is already set explicitly.
Add baseline test coverage using a QTableWidget.
Fixes: QTBUG-122180
Pick-to: 6.7 6.5
Change-Id: I8c6279ad2fd8c5718ebea26e27c64ae823625748
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
If QToolButton::mouseReleaseEvent triggers its deletion then it
will crash when dereferencing its d pointer.
qabstractbutton.cpp already uses QPointer guards in many places but
qtoolbutton.cpp was missing this one.
While deleteLater() is still our recommendation, we shouldn't crash.
It's not always obvious what led to the button's destruction,
as the chain of indirections can be long.
Change-Id: I4a33447fa4e90953370277eb57a161398ded9a9c
Pick-to: 6.7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Split out some helpers to write the theme code with path fallback
checking for the enum case (identified by a fully qualified icon) or
the old XDG/filename case.
Task-number: QTBUG-121823
Pick-to: 6.7
Change-Id: If2755483ab899f04e372cf95443f7e03970f6e7f
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
QLayout::widgetEvent() returned early, when the layout was disabled.
That suppressed ChildRemoved events and lead to a crash, when the
layout was enabled again.
Don't return early on ChildRemoved events.
Add an autotest in tst_layout::removeWidget().
Fixes: QTBUG-124151
Pick-to: 6.7 6.5 6.2
Change-Id: Ib0a0bb73978d9fc2c9777d300cf38a8c4496b702
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Chris René Lerner <chris.lerner@qt.io>
New comparison macros are used for following classes:
- QCborArray::Iterator
- QCborArray::ConstIterator
Replace public operators operator==(), operator!=(), operator!<(), etc
of classes to friend methods comparesEqual(), compareThreeWay();
Use *_helper methods to have an access to protected members of
QCborValueRef class from friend functions.
Task-number: QTBUG-120300
Change-Id: Ie8ffef3e2278dfbf2bf0b32c30a7bf98d99fd1c3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QVariant is rather big for passing by value; and no caller has any
further use for the QVariant it's passing in.
Pick-to: 6.7 6.5
Task-number: QTBUG-122619
Change-Id: I2751745e715aacfa8982ac97b4ae777fde5e88de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Axivion (SV546) points out (based on a clazy "rule of three" that
might be rule of five by now) the lack of move and copy assignment and
construction. We don't want those anyway, so tell the compiler not to
create them.
Pick-to: 6.7 6.5
Task-number: QTBUG-122619
Change-Id: Ie951a2c3d60d76ad3448310d3f9bbda22190015b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Drive-by add NaN value for testing.
Change-Id: I5f663c2f9f4149af84fefffd17c035f099d01d55
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
We must compare the raw string length in UTF-8, not the UTF-16 one.
[ChangeLog][QtCore][QCborValue] Fixed a bug that caused certain
non-US-ASCII string comparisons to produce results not in line with the
CBOR specifications.
Pick-to: 6.5 6.6 6.7
Change-Id: I5f663c2f9f4149af84fefffd17c05d1c0f1bbc3a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Amends feff219aad which didn't really
do the revert for some reason.
This reverts commit bba26d7220.
Reason for revert: Latest emulator update fixed the issue.
Change-Id: I0bc4263eae36c3ff81f235dcfe3bad9b30afd5d8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
This reverts commit c6138bf9de.
Reason for revert: latest emulator version fixed the issue.
Task-number: QTBUG-118234
Task-number: QTQAINFRA-5971
Pick-to: 6.7
Change-Id: I7137851baf2b71e760af4bfab7726d761b7f59ff
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Make it possible to generate one way QColorTrcLut tables, and make it
easier test out different table size,
Change-Id: I953c68d772699de87fdddbf15ce196e6ba8b9898
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This also adds image conversion of both format and color space, which
will also be required later for conversions to CMYK formats and color
spaces.
Change-Id: I578c0a010ffcdb4df4cf9080c0621fac8bc342bf
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This reverts commit f2f2b6ef18.
Reason for revert: There are couple of issues introduced. Lets revert to base revision and go with fixes from there.
Pick-to: 6.5 6.6 6.7
Change-Id: I8341de42ef3e4a609bfbffdb763dd5c28794473c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Even Oscar Andersen <even.oscar.andersen@qt.io>
returning early if the object is null will not clear pending exceptions
from the previous failed JNI call, and that will crash the app on the
next jni call if an explicit exception clearing is not done, wish mostly
the case. Checking and clearing for exceptions has to always be done
under this call.
Pick-to: 6.7
Fixes: QTBUG-122135
Change-Id: I0d42d012a4d1305fa07147fd22860d7c005f9b83
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Follow the established convention that byte-oriented image formats
have the "8888" suffix, not "32". The old enum name is temporarily
left to help port other submodules.
This work has been kindly sponsored by the QGIS project
(https://qgis.org/).
Change-Id: I4b6f10cb22312b614cb9cf4b0ac439907276c538
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The focus chain in widgets is implemented as a double-linked list,
using QWidgetPrivate::focus_next and focus_prev as pointers to the
next/previous widget in the focus chain.
These pointers are manipulated directly at many places, which is error
prone and difficult to read.
Build an abstraction layer and remove direct usage of focus_next and
focus_prev. Provide functions to insert and remove widgets to/from the
focus chain.
Add a test function to tst_QWidget.
Task-number: QTBUG-121478
Change-Id: Ide6379c0197137e420352a2976912f2de8a8b338
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Wait 2x double click interval, to make sure a double click is safely
avoided.
Use QTRY_COMPARE at the end of the function, to cover cases where a
synchronously delivered mouse click causes posted events.
Wrap the test implementation in #ifndef QT_NO_STYLE_FUSION, as is the
declaration.
Skip the test on QNX.
Fixes: QTBUG-123798
Pick-to: 6.7 6.6 6.5
Change-Id: I73f4acb241a8c77a542152288c65f3d07582e075
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
f1bb9cfbf6 added this value, but it was
only when a test in qtdeclarative tried to use it that it was
discovered that it couldn't be set on 32 bit operating systems (armv7,
AKA imx7) due to overflow as a result of the bit shifting that is done.
Fix it by using an old, deprecated value. If any old codebase using
that older flag tries to build against a newer Qt with this change, it
shouldn't affect it, as setting the flag does nothing in Widgets, and
native menus didn't exist in earlier versions.
Task-number: QTBUG-69558
Change-Id: I520154d02e9ccf007ebd73807685212a19fbee1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As part of eacd58d4e7, a mechanism was
added to prevent posting redundant UpdateRequest events to the top
level widget, managed by QWidgetRepaintManager. The mechanism relied
on a boolean that was set when posting an update request event, and
reset when processing the event for the top level widget, as part
of QWidgetRepaintManager::sync().
However, for paint-on-screen widgets, we don't post an update request
to the top level, we post it to the paint-on-screen widget directly.
And when processing that event, we don't paint the widget though the
normal QWidgetRepaintManager machinery, but instead call the paint
event via QWidgetPrivate::paintOnScreen().
As a result, an update() on a paint-on-screen widget would result
in never receiving updates for non-paint-on-screen widgets, as
we assumed there was no reason to send further update requests.
We could fix this by clearing the updateRequestSent flag as part
of the paintOnScreen() code path, but that's incorrect as the flag
represents whether the top level QWidgetRepaintManager needs an
update request event or not, and would lead to missed updates
to normal widgets until the paint-on-screen widget finishes its
update.
Instead, we only set updateRequestSent if we're posting update
requests for non-paint-on-screen widgets, which in practice
means the top level widget.
The paint on screen logic in QWidgetRepaintManager::markDirty
still takes care of rate-limiting the update requests to the
paint-on-screen widget, by comparing the dirty area of the
widget.
There is definite room for improvement here, especially in the
direction of handling update requests via QWindow::requestUpdate
instead of manually posted events, but for now this will have to
do.
Fixes: QTBUG-80167
Pick-to: 6.7 6.6 6.5 6.2 5.15
Change-Id: Ib5685de7ca2fd7cd7883a25bb7bc0255ea242d30
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
JPEG part 6 defines CMYK support. This commit adds such support to the
JPEG plugin.
A *very* interesting discovery is the fact that Photoshop inverts the
meaning of the CMYK color channels when saving into JPEG: 0 means "full
ink", and 255 means "no ink". Most other image viewers/editors follow
the same interpretation, I imagine for compatibility.
But others, like Adobe Reader, don't (???) -- a PDF expects a DCT
encoding with 0 meaning "no ink". I am adding a SubType to the image I/O
handler to let the user choose what they want, defaulting to Photoshop
behavior.
Also, turns out that Qt was already loading CMYK files and converting
them to RGB. I don't think we should do automatic, lossy conversions (we
were not taking into account an eventual colorspace...), so I'm changing
that loading to yield a CMYK QImage.
Finally: save the colorspace, even if it's a CMYK image.
QColorSpace doesn't support anything but RGB matrix-based colorspaces.
Yet, it can load an arbitrary ICC profile, and will store it even if
it's unable to use it. We can use this fact to preserve the colorspace
embedded in CMYK images, or let users set an arbitrary ICC profile on
them through Qt APIs, and then saving the result in JPEG.
[ChangeLog][QtGui][JPEG] Added support for loading and saving of JPEG
files in 8-bit CMYK format. When loading a CMYK JPEG file, Qt used to
convert it automatically to a RGB image; now instead it's kept as-is.
This work has been kindly sponsored by the QGIS project
(https://qgis.org/).
Change-Id: Ibdbfa16aa35814f5dba28c2df89577175162b731
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Add setDepthResolveTexture(). Should work similarly to the color
attachments' resolveTexture, but for depth or depth-stencil.
However, this is another fragmented feature.
- D3D11/12:
Not supported. AFAICS multisample resolve (ResolveSubresource) is just
not supported for depth or depth-stencil formats.
- Vulkan:
Not supported with Vulkan 1.0.
Supported with Vulkan 1.1 and the two extensions.
(VK_KHR_depth_stencil_resolve which in turn requires
VK_KHR_create_renderpass2 since the 1.0 structs are not extensible, so
now need to use VkRenderPassCreateInfo2 and all the '2' structs)
In Vulkan 1.2 the above are in core, without the KHR suffix, but we
cannot just use that because our main target, the Quest 3 (Android) is
Vulkan 1.1. So 1.2 and up is ignored for now and we always look for
the 1.1 KHR extensions.
The depth resolve filter is forced for SAMPLE_0. AVG seems to be
supported on desktop (NVIDIA) at least, but that's not guaranteed, so
would need physical device support checks. On the Quest 3 it does not
seem to be supported. And in any case, other APIs such as Metal do not
have an AVG filter mode at all, so just use SAMPLE_0 always.
- OpenGL (not ES):
Should work, both when the multisample data is a renderbuffer and a
texture. Relies on glBlitFramebuffer with filter NEAREST. What it does
internally, with regards to the depth/stencil resolve mode, is not under
our control.
- OpenGL ES:
Should work when the multisample buffer is a texture. But it will not
work when a multisample renderbuffer (setDepthStencilBuffer, not
setDepthTexture) is used because the GLES-only multisample extensions
(GL_EXT_multisampled_render_to_texture,
GL_OVR_multiview_multisampled_render_to_texture, which we prefer over
the explicit resolve-based approach) work with textures only.
- Metal:
Should work.
Task-number: QTBUG-122292
Change-Id: Ifa7ca5e1be78227bd6bd7546dde3a62f7fdbc95e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This commit adds a CMYK 8bpp format to QImage. The idea is to enable the
transport of CMYK images inside Qt, for instance to be loaded/saved from
files or painted on CMYK capable paint devices (e.g. PDF).
Also, rasterization support *from* a CMYK image is added (on top of a
RGB surface), as well as CMYK image scaling/conversion.
Conversion and rasterization between CMYK and RGB isn't particularly
optimized nor it honors any colorspaces yet. The overall idea is to
match 1:1 the existing behavior of CMYK QColor (which get naively
changed to RGB; there isn't colorspace support in QPainter yet).
There are no plans to add rasterization *towards* CMYK.
Image save/load in native CMYK formats will be added in future commits.
This work has been kindly sponsored by the QGIS project
(https://qgis.org/).
[ChangeLog][QtGui] Support for 8-bit CMYK images has been added.
Change-Id: I4b024cd4c15119c669b6ddd450418a9e425587f8
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Inline namespaces serve the purpose for which the original
-qtnamespace option was added and allow for macro simplification (no
need for any using directives). This makes it possible to use
namespaced builds of Qt also for Qt for Python and similar use cases
which have issues with the additional namespace.
[ChangeLog][QtCore] It is now possible to use an inline namespace for
-qtnamespace (option -qtinlinenamespace).
Task-number: PYSIDE-2590
Change-Id: Ia0cecf041321933a2e02d1fd8ae0e9cda699cd1e
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Task-number: QTBUG-123942
Change-Id: I89ee1ce70fba69c9b2d6109669186a06a92da039
Reviewed-by: Even Oscar Andersen <even.oscar.andersen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
What was done:
* Removed headers in src/gui/accessible/windows/apisupport: as of
v13.1.0, MinGW supports most of the definitions in these headers.
Including uiautomation.h should be enough.
* Removed the QWindowsUiaWrapper class: it's not meant to be extended
or itself instantiated, is an "ultra-thin" layer (it even preserves
the "all-caps" Win types of function args), and is in effect only a
MinGW-bound "kludge". Instead of this class, use the UI Automation
API directly, with the assumption that it's available and fully
functional, as specified in the MS docs. Any gaps between this
assumption and what is delivered by MinGW are bridged with specific
(and explicit) temporary "kludges".
* Implemented said specific "kludges" in qwindowsuiautomation. For
Windows builds, the header just includes uiautomation.h, and the
.cpp is empty. For MinGW, the header contains definitions still
missing from uiautomation.h, and the .cpp implements functions
of the UI Automation core library through imports from the
uiautomationcore DLL.
* Windows plugins (and tst_qaccessibility): use the UI Automation API
definitions directly, instead of the "ultra-thin" wrapper.
* Windows plugin builds: use uiautomationcore library, if found.
What's intended:
* Unburden Gui of the Windows UI Automation COM interfaces and other
definitions that are copied in the uia*.h headers.
* Make the Windows plugins independent of MinGW shortcomings.
* Remove the QWindowsUiaWrapper class that essentially only hides these
shortcomings and the "kludge" code needed to overcome them.
* As MinGW adds further support to the UI Automation API over time,
make it noticeable which workarounds are no longer needed. The
current approach of hiding "kludges" in a wrapper class will also
hide the fact that they're no longer needed, if/when that time comes.
Change-Id: I0070636817d5de81d0b106e9179e2d0442362e2a
Reviewed-by: Wladimir Leuschner <wladimir.leuschner@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Wrap the call in QVERIFY.
tst_QTextStream::read0d0d0a was also faulty as it *never* opened
the file because of a broken path. Fix it with QFINDTESTDATA.
Change-Id: I61a8f83beddf098d37fda13cb3bfb4aaa4913fc5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To indicate color spaces that can not be used as a target,
but only as a source.
Change-Id: Iae79e3533599c112872d171a2f45178029be89dc
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
And ensure all combination of CBOR types are tested.
Amends e5ebb9022a
Change-Id: I5f663c2f9f4149af84fefffd17c02d352cd41f3f
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
Like the QPolygon code. This fixes a mistake in failing to clear the
list before de-marshalling in operator>>.
Updated most of the QDataStream tests to have data in the objects
they're streaming into, to ensure that the stream overwrites everything.
Fixes: QTBUG-122684
Task-number: QTBUG-122704
Pick-to: 5.15 6.5 6.6 6.7
Change-Id: I01ec3c774d9943adb903fffd17b6920c72f5042b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
New comparison macros are used for following classes:
- QJsonArray::iterator
- QJsonArray::const_iterator
Replace public operators operator==(), operator!=(), operator!<(), etc
of classes to friend methods comparesEqual(), compareThreeWay();
Use *_helper methods to have an access to protected members of
QCborValueConstRef class from friend functions.
Task-number: QTBUG-120300
Change-Id: I9b41b619107ce69d8b6dab4938232fab841aab51
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
File was opened on the previous line.
Change-Id: I418d616a2f82d9241c37224e4c1a0fb12894eb40
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
A literal backslash needs to be doubled so that the parser doesn't treat
it as escaping the following character when the markdown is read back.
In ca4774131b we tried to limit it to
backslashes that were not already escaped. In case someone really needs
a longer series of backslashes, it's more correct to escape them all;
but this comes with the risk that if they do not get un-escaped by the
markdown parser in some scenario, repeated round-trip saving and loading
could multiply them excessively. So we also add a lot of tests to try
to verify that this is safe.
Task-number: QTBUG-96051
Fixes: QTBUG-122083
Pick-to: 6.7
Change-Id: I64f610d24e99f67ebdc30d5ab5c6cf3985aec5ec
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Replace public operators operator==(), operator!=() of
QJsonObject to friend methods comparesEqual().
Use QT_CORE_REMOVED_SINCE and removed_api.cpp to get rid of current
comparison methods and replace them with a friend.
Add friend method comparesEqual(QJsonObject, QJsonValue)
to the QJsonObject class, to support comparison between QJsonObject
and QJsonValue elements, see test-case valueEquals().
Task-number: QTBUG-120300
Change-Id: Ibab0b4b39966205447e31c41e94e7e1a4e31e553
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: Ifd2c5dcd1cc3d13f689ffd6400ffec0fcc3a6b93
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Focus abstraction in QWidgetPrivate makes direct access to
QWidget::focus_next and focus_prev an antipattern.
Remove usage.
Add object names for better diagnostics when debugging focus issues.
Task-number: QTBUG-121478
Change-Id: Iecd3bdc824bf77c519951f8f7801eb50b29a6e00
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Replace public operators operator==(), operator!=() of
QJsonValue/QJsonValueConstRef/QJsonValueRef classes to friend
methods comparesEqual().
Use QT_CORE_REMOVED_SINCE and removed_api.cpp to get rid of current
comparison methods and replace them with a friend.
Delete non-exported public operators operator==(), operator!=()
for QJsonValueConstRef/QJsonValueRef classes.
Add comparison check to auto-test.
Task-number: QTBUG-120300
Change-Id: I01434af4ce5a7589733db4a9b14f54ad42e852ed
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: Id3b9967ddaa7dbb87eef9faaf4681d7cb014ba8c
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I88d39def0e85e147b3621d98d150ee65463be94f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: If805bc0e021625b94edc83d7abccc435c1880bea
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I7a4b21018216c2b7cced8d4aa5084c527b694f4a
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: Ieb516cc4fd02230c0ec6bb189da049c3741358dd
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I2faaf575a04652a395956c7d790ac18d9f3ec9e6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit f4bac3ca17.
It broke builds with Xcode 15
Change-Id: Iee232658ede3dfb09d65f3f6a95410c069941421
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If a signal was invalid, the code still called messageSignature(),
which returns a null QByteArray, and passed its constData() to
qWarning("%s"). That probably worked in our implementation, because it
falls back to QString::asprintf(), but it raised eyebrows, so avoid
calling messageSignature() on invalid QMetaMethod.
This changes the warning output, so adjust the test.
Task-number: QTBUG-123544
Change-Id: I41bc6650de091f61354ff91ee45659668f0e0223
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replace public operators operator==(), operator!=() of
QJsonDocument to friend methods comparesEqual().
Use QT_CORE_REMOVED_SINCE and removed_api.cpp to get rid of current
comparison methods and replace them with a friend.
Task-number: QTBUG-120300
Change-Id: I7b61765c34406b7a9fb7dd8b1fc554c87af6a3f3
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is a limit in WebGL that OpenGL context sharing is not supported.
There is a proposal from 2013
(https://www.khronos.org/webgl/wiki/SharedResouces), but it seems that
it never was implemented.
There is an additional limit in that there is exactly one WebGL context
for each canvas (i.e. window).
A part of the problem here is that the identifier for an OpenGL context
is essentially a surface-thread-context triplet. And the thread part
might be more difficult to handle in a javascript setting.
Regardless of why, we need to have an opinion about what the
consequences are, and what we support to what extent.
As such this commit:
1) Adds a comment on the QOpenGLContext describing the limitations
2) Adds a qWarning() on the first activation of a shared context.
The second item is not complete. We will have problems with multiple
individual contexts also, It is just not possible to warn for these
cases. The second item covers, maybe, the most common case.
Change-Id: I51550a6acb0a7f6f6fa5e9e2c3da080a1d2b498f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I0271f3baf718ca5ae03464bbd415cd0feaa9087d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test started to "crash" since 576c9160b1.
Task-number: QTBUG-123172
Change-Id: I16c78f517f718510aa22a2e24ed3d502edae52e5
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Types marked with [[clang::trivial_abi]] are considered to be trivially
relocatable for Clang. This is ABI compatible, since in Qt 6 we can
change the value of QTypeInfo::IsRelocatable "after the fact" -- it
simply means that code that doesn't get recompiled is pessimized.
Change-Id: I32e52bfb212c7919b2ebcf7832ede4404358330f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix the inclusions of stdlib headers to what is actually used in the
test.
Change-Id: I03ad4bdfd0b036bc4cee65b6bd2cd43ac7449722
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace public operators operator==(), operator!=() of
QJsonArray to friend methods comparesEqual().
Use QT_CORE_REMOVED_SINCE and removed_api.cpp to get rid of current
comparison methods and replace them with a friend.
Add friend method comparesEqual(QJsonArray, QJsonValue)
to the QJsonArray class, to support comparison between QJsonArray
and QJsonValue elements, see test-case fromToVariantConversions()
Task-number: QTBUG-120300
Change-Id: I8440ca0761bede8551ff792bfa7f22e47b56fa79
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is probably a remnant from when QAbstractFileEngine was public API
since it's been changed to private API, just use QFile::FileTime.
Pick-to: 6.7
Change-Id: I60d3d4ff811f95434b81d5ca115f5d43cfff8b15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes the ownership of the returned pointer clearer. It also
matches reality, some call sites were already storing the pointer in a
unique_ptr.
Also shorten the function name to "createLegacyEngine", you have to read
its docs anyway to figure out what it does.
Drive-by changes: less magic numbers; use sliced(); return nullptr
instead of `0`.
Change-Id: I637759b4160b28b15adf5f6548de336887338dab
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The Qt::WA_ShowWithoutActivating flag was not respected
Added test in the part of the code that calls
requestActivateWindow
Added selenium focus test
Fixes: QTBUG-122776
Change-Id: I1a248ed4352f86376d615a4cb7022e7ea095d4e7
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
The old code allocated QSignalSpies on the heap and stored them in a
non-owning container, so if one of the many check macros trigger,
those objects would be leaked. Ditto QNetworkReplies. The code also
used dynamically-sized containers for statically-sized data; a common
anti-pattern.
Hold the sample QUrls in a C array instead, QSignalSpies in C arrays
of std::optional (to delay initialization) and QNetworkReplies in a C
array of std::unique_ptr with the existing QScopedPointerDeleteLater
deleter.
Pick-to: 6.7
Change-Id: I7305115af15c079abba6d45c5de8db2198ea7a6d
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
On Linux "../" is /tmp, which is more likely to cause issues with the
dir.entrylist() below used in that test; /tmp could have a lot of
temporary files, any of them can be gone in a jiffy. Noticed this test
occasionally falking out when running tests in parallel (`ctest -R
"foo|bar" -j3`).
This may be an unintentional side effect of
b3e9e80719, which changed the code to use
a temporary dir for testing instead of creating/deleting dirs in the
source dir ("../" from the source dir has a more stable entries count
than /tmp).
Change-Id: I98da86223792bc9f34c173fc02cc84049ed699ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of using ~/Downloads, which we have no control over (OK for
the CI, but not locally), create a parent temp dir, then another temp
dir inside it.
Also rename it to nestedTempDirs, the issue from the bug report wasn't
tested because it relied on a dir being created, then failing to set
permissions on it. The code has changed a lot since then.
Pick-to: 6.7 6.6 6.5 6.2
Change-Id: I2b03d5d761117aaf436041c13c0dc394b106bf89
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Turn the QSignalSpy deletions from deferred (via deleteLater()) into
immediate ones. This is ok: QSignalSpy is using itself as a context
object in QMetaObject::connect(), so the connection thus established
to the monitored signal will be atomically severed if either sender or
receiver are destroyed. There never was a need to defer deletion of
the signal spy, so don't.
Found by making QSignalSpy's inheritance from QObject private.
Pick-to: 6.7 6.6 6.5
Change-Id: I962d28c3a78f356d234324fed68716f2f1052100
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And remove hasNext/next() methods. This remodels QAFEI to be like
QFileSystemIterator. This better fits the logic in the newly added
QDirListing class (which uses STL-style iterators).
QFSFileEngineIterator:
Initialize the internal nativeIterator in the constructor; also replace
the advance() private method with an override for the advance() method
inherited from the base class.
QResourceFileEngineIterator:
Override currentFileInfo(), with a QResouces the QFileInfo is created
on demand if/when this method is called.
This is the backend/private API, and QDirListing is the public API that
can be used in a ranged-for to iterate over directory entries.
Change-Id: I93eb7bdd64823ac01eea2dcaaa6bcc8ad868b2c4
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
New comparison macros are used for following classes:
-QXmlStreamAttribute
-QXmlStreamNamespaceDeclaration
-QXmlStreamNotationDeclaration
-QXmlStreamEntityDeclaration
Replace public operators operator==(), operator!=() of
classes to friend methods comparesEqual();
Use QT_CORE_REMOVED_SINCE to get rid of current comparison methods
and replace them with a friend.
Add checkStreamNotationDeclarations()/checkStreamEntityDeclarations()
test-cases to test change.
Task-number: QTBUG-120300
Change-Id: I0b5642b2e23cc21ede7bc4888f0a9bddd6c08d07
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace public operators operator==(), operator!=(), operator<() of
QCborMap to friend methods comparesEqual() / compareThreeWay().
Use QT_CORE_REMOVED_SINCE to get rid of current comparison methods
and replace them with a friend.
Delete #if 0 && __has_include(<compare>) blocks,
since they are not required anymore.
Add friend methods comparesEqual(QCborMap, QCborValue) and
compareThreeWay(QCborMap, QCborValue) to the QCborMap
class, to support comparison between QCborMap
and QCborValue elements, see test-case mapSelfAssign() ->
QT_TEST_EQUALITY_OPS(it.key(), QCborMap({{0, v}}), true);
Task-number: QTBUG-120300
Change-Id: I9e33df255d16484efd3124cf0632db859408fb5d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
In 4c21f72837 we did this for
QImageReader. So, to support the same for QMovie, we just need
to remove the custom (and very inefficient) scaling for frames.
This should be safe since the underlying QImageReader must ensure
that the returned image matches the scaled size.
[ChangeLog][QtGui][QMovie] Allow only one dimension (width
or height) to be set for the scaled size. In this case, the other
will be calculated automatically based on the original movie size
and maintaining the aspect ratio.
Fixes: QTBUG-115039
Change-Id: I50979a75970c79647dbb8c8b4b121266ba033a63
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The QCOMPARE_EQ macro was mistyped.
This amends commit 5ea434b09f.
Change-Id: I313eb5ef02bb2266d659bdbe41d7d8f10691e0ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QTest::ignoreMessage() to prevent the runtime warnings being
printed, cleaning up the test log, and to document that they're
intended.
Pick-to: 6.7 6.6 6.5
Change-Id: Ia0ba888cce83529217642be0e7e321d9406ba386
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If only one dimension (width or height) of the scaled size is set
by an user, let's try to calculate the second one, based on the
image original size and maintaining the aspect ratio.
[ChangeLog][QtGui][QImageReader] Allow only one dimension (width
or height) to be set for the scaled size. In this case, the other
will be calculated automatically based on the original image size
and maintaining the aspect ratio.
Task-number: QTBUG-115039
Change-Id: If1b13b1ead3cf788915c08bdb3ba8becd8bf8042
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Replace public operators operator==(), operator!=(), operator<() of
QCborArray to friend methods comparesEqual() / compareThreeWay().
Use QT_CORE_REMOVED_SINCE to get rid of current comparison methods
and replace them with a friend.
Delete #if 0 && __has_include(<compare>) blocks,
since they are not required anymore.
Add friend methods comparesEqual(QCborArray, QCborValueConstRef)
and compareThreeWay(QCborArray, QCborValueConstRef) to QCborArray
to support comparison between QCborArray and
QCborValueRef/QCborValueConstRef, see test-case mapMutation().
Add QT_TEST_EQUALITY_OPS/QT_TEST_ALL_COMPARISON_OPS tests for QCborArray
test-cases.
Task-number: QTBUG-120300
Change-Id: Ifad1a04c61363618e8bba73cf7c87757552d722a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Copy test dirs from the source dir to a QTemporaryDir,
this way each run starts with a clean slate.
Also on some setups the source dir could be read-only.
Task-number: QTBUG-117449
Change-Id: Iea5fd661b66dd3cbae0b663bb504b14c8ccbe491
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Simplifies maintenance of code paths that rely on Metal.
Change-Id: I1d1f705fffc14dbafde346eeb555b43be6d5be54
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We have implemented the same functionality recently for POST, in this
patch implement it for PUT.
Task-number: QTBUG-108309
Change-Id: I34c41538054fec836d0d1d1dbb44fabab9bc0e9a
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Actually this has already worked if a nullptr was casted as a
QIODevice*. Add an overload with a nullptr_t type, that does
this behind the scenes.
Fixes: QTBUG-108309
Change-Id: I2d4b17ae94cf4de2c42257d471ef901c8994fee5
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove minimum window size restriction. User should be able to change
minimum window size if needed.
Set default size to 160x160 to match other platforms.
Change-Id: Ic199fc34982021ba38d631476fbb1c51370b2e8e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
There was a runtime feilure in that we try to create
directories until it fails. This does not fail on wasm
so added a hardlimit of 20480
Change-Id: I6ef65f7be277fc8775879733f969d2ce008a439a
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
This reverts commit c2b359721d.
Reason for revert: Required fixes have been merged
Change-Id: I2314323e7ee673fe4136ce4ac4f867ac18dcd2e6
Reviewed-by: Simo Fält <simo.falt@qt.io>
Detected by TSAN in tst_QThread::terminateAndPrematureDestruction()
but better have a dedicated unittest, with values emitted by the signal
and recorded in the spy.
Pick-to: 6.7 6.6 6.5
Change-Id: I141d47b0ea0b63188f8a4f9d056f72df3457bda5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace public operators operator==() and operator!=() of
QCborValueConstRef and QCborValueRef classes
to friend methods comparesEqual().
Replace public operator<() of QCborValueConstRef and QCborValueRef
classes to friend methods compareThreeWay() respectively.
Use QT_CORE_REMOVED_SINCE to get rid of current comparison methods
and replace them with a friend.
Delete #if 0 && __has_include(<compare>) blocks,
since they are not required anymore.
Add comparison() test-case for QCborValueConstRef/QCborValueRef
testing.
Add QCborValue::operator==()/QCborValue::operator!=()/
QCborValue::operator<() and QCborValueRef::operator==()/
QCborValueRef::operator!=()/QCborValueRef::operator<() operators
to the removed_api file.
Task-number: QTBUG-120300
Change-Id: I2e8e4e32b7b5b49da321364cc12986e9c64b5f37
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For QMap on a std::pair, QMap::iterator{}.operator->() would result in a
type that has "first" and "second" members: std::pair itself. But it
would be wrong to marshall and demarshall the first and second elements
thereof as the key and value, so give preference to the .key() and
.value() selection, which would store the std::pair as the type.
Fixes: QTBUG-123401
Pick-to: 6.5 6.6 6.7
Change-Id: I6818d78a57394e37857bfffd17bd69bb692dd03b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Qt supports some complex foreground brushes which we cannot
express using normal CSS, so we introduce a Qt-specific property
for this. We already had some support for background gradients
in widget style sheets, but this expands support to foreground
brushes of text when converting a QTextDocument from and to HTML.
It also adds an optional "coordinatemode" attribute to the
gradient functions so that this can be faithfully restored from HTML.
Task-number: QTBUG-123357
Change-Id: I3d6dd828f68272995c8525bec5a7b421fdbed670
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
CSS does not have text outline properties, instead different
browsers have custom properties for this. That currently means
that you can have a QTextDocument where you applied a stroke to
text and textEdit.setHtml(textEdit.toHtml()) will remove it.
Since a primary goal of the HTML support in QTextDocument is that
it can be used to save and faithfully restore its contents, we
implement qt specific properties for stroke.
Task-number: QTBUG-123357
Change-Id: Id9cf63abfabe2109ffb6fd74f9cb013304763ccb
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It is failing a bunch on macOS in CI, but not locally.
So just assuming the timings are too tight in CI and increasing
them.
Amends 8de1ed8979
Pick-to: 6.7
Change-Id: Icb44fdbd2aa117de7350c5df2e8351bb19c865c4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This has to be done from all places where we deref it. Otherwise we leak
memory.
Pick-to: 6.7 6.6 6.5
Fixes: QTBUG-116086
Change-Id: I57307ac746205578a920d2bb1e159b66ebd9b2cc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Because they always were, but we never tested it.
Change-Id: I503c65ed41b90d710c651d879a4477965f2ef0d6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Check that all string-like types implement compareThreeWay() as a
(hidden) friend function.
This test revealed some problems: because QByteArrayView is implicitly
constructible from QLatin1StringView, the qCompareThreeWay() call
sometimes picked the compareThreeWay() overloads with QByteArrayView
instead of picking the "reversed" overloads that use QLatin1StringView.
This was leading to wrong results, because QByteArrayView is
interpreted as utf-8 data, not latin-1.
Explicitly add the missing compareThreeWay() and comparesEqual()
overloads.
Note that relational operators were never affected by this problem,
because in C++17 mode we explicitly generate the reversed versions,
and in C++20 mode the compiler does that for us.
Task-number: QTBUG-117661
Change-Id: Ia96af59c60ebf2fae6cf2a49231d6b6f401aceaa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It is passing on my machine with Visual Studio 17.10 Preview 1.
But only with C++20 enabled.
Pick-to: 6.7 6.6 6.5
Task-number: QTBUG-101761
Change-Id: Ia5af3d75d35dda1df9b39bdc94f07dd746ff60af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit fc33fea999.
The change caused issues with system-wide PUA fallbacks on
platforms where this is supported. It needs to be replaced by
an approach which still falls back, but only for fonts which
are explicitly categorized as PUA fallbacks.
Pick-to: 6.5 6.6 6.7
Task-number: QTBUG-110502
Change-Id: I985a1f8076645593c50e81759872b4227d0fcd0d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change beginEntryList() to take a path parameter, which it passes on
to the QAFEIterator constructor; setting the path at construction
makes more sense, because typically the path isn't supposed to change
during iteration, and this simplifies the code at the call site.
Remove setPath(), the last usage in Qt repos was in QtCreator, and that
has been ported away from it.
Change-Id: I01baa688e0f9b582aacb63d7d98a794276e58034
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
C++11 has been required for a long time.
Pick-to: 6.7 6.6 6.5
Change-Id: Ib6c1571b100dd4eb8194d515f2180ca26481b556
Reviewed-by: David Faure <david.faure@kdab.com>
QEXTRACTTESTDATA returns a QSharedPointer<QTemporaryDir>, so the member
variable has to be of that type so that all code paths work.
Amends 986b5b4f47 (QDirIterator) and
c39a0d1e89 (QDirListing).
Change-Id: Ie4b76687125f0506a2c899acca222123f0b1c44a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add `f`-suffix to float assignments to avoid implicit conversion from
double to float.
Fixes: QTBUG-122303
Change-Id: I456e2952fe8c96783ab116ac4cb56a28b38de9d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test does not run just like that it is necessary to:
set maxSizeBits to 28
mapOffsetOverflow: Settings copied from Linux
Change-Id: Idc276a7e2d777a9a6ad0c0e90d729fb4646a38b6
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Change 997fd3b88e fixed integer overflows
with huge texts. This was done by using qsizetype for size calculations
instead of int. However, that change introduced a serious regression
due to an itermediate imultiplication result being "promoted" to unsigned,
and therefore a negative value being converted to a large positive.
The solution is to make sure all values in the expression are signed.
Fixes: QTBUG-123339
Task-number: QTBUG-119611
Pick-to: 6.7
Change-Id: I3f9189f77b383c6103cf5b35981cdb607b065f6f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
python must be installed with higest version 3.11
Change-Id: I14ca5fa09b088903c95b2f6e2d6ace8400a7b015
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
When connecting a QFutureWatcher to the QFuture it will connect to the
output interface, which will queue up events to notify about the current
state. This happens in the thread of the QFutureWatcher.
Since 07d6d31a4c unfortunately the sending
of those events was done outside the lock, meaning the worker-thread
could _also_ send events at the same time, leading to a race on which
events would be sent first.
To fix this we move the emission of the events back into the lock
and because it is now inside the lock again anyway, we will revert
back to posting the callout events immediately, so this patch also
partially reverts 07d6d31a4c
Fixes: QTBUG-119169
Pick-to: 6.7 6.6
Change-Id: If29ab6712a82e7948c0ea4866340b6fac5aba5ef
Reviewed-by: Arno Rehn <a.rehn@menlosystems.com>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
This reverts commit c23d3ca1f0.
Reason for revert: Update to Emscripten 3.1.50 has been merged.
Change-Id: Ie2082dcc2ee34a6d4e519c143037fda9678be234
Reviewed-by: Even Oscar Andersen <even.oscar.andersen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jøger Hansegård <joger.hansegard@qt.io>
It was not setting the value _back_ to 0 when the function ended
and this caused qtbug68821proxyError to fail fairly consistently
on Windows when it was running in the same run.
qtbug68821proxyError was always succeeding when ran by itself so
it was quite odd.
Pick-to: 6.7
Change-Id: Ifa4982f1b10128674081136a30bdab4b0ce7004a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
When a QWidget was reparented, we would take care to reparent its
backing QWidgetWindow as well, into the nearest QWindow of the
new QWidget parent.
However we would only do this for the reparented widget itself,
and not any of its child widgets. In the case where the widget
has native children with their own QWindows, the widget itself
may not (yet) be native, e.g. if it hasn't been shown yet, or
if the user has set Qt::WA_DontCreateNativeAncestors.
In these scenarios, we would be left with dangling QWindows,
still hanging off their original QWindow parents, which
would eventually lead to crashes.
We now reparent both the QWindow of the reparented widget (as
long as it's not about to be destroyed), and any QQWindow
children we can reach. For each child hierarchy we can stop
once we reach a QWindow, as the QWindow children of that
window will follow along once we reparent the QWindow.
QWindowContainer widgets don't usually have their own
windowHandle(), but still manage a QWindow inside their
parent widget hierarchy. These will not be reparented
during QWidgetPrivate::setParent_sys(), but instead
do their own reparenting later in QWidget::setParent
via QWindowContainer::parentWasChanged(). The only
exception to this is when the top level is about to
be destroyed, in which case we let the window container
know during QWidgetPrivate::setParent_sys().
Finally, although there should not be any leftover
QWindows in the reparented widget once we have done
the QWidgetWindow and QWindowContainer reparenting,
we still do a pass over any remaining QWindows and
reparent those too, since the original code included
this as a possibility.
We could make further improvements in this areas, such
as moving the QWindowContainer::parentWasChanged() call,
but the goal was to keep this change as minimal as possible
so we can back-port it.
Fixes: QTBUG-122747
Pick-to: 6.7.0 6.7 6.6 6.5
Change-Id: I4d1217fce4c3c48cf5f7bfbe9d561ab408ceebb2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If the dialog is closed by pressing a button, the button will be
reflected via clickedButton(), and the result() will reflect either
the QMessageBox::StandardButton value, or an opaque value for custom
buttons.
Depending on the role if the buttons, the accepted or rejected
signals are emitted.
If the user called accept() or rejecct() on a dialog that had
already been closed by a button, we would as a result of
1f70c073d4 emit a signal based
on the original button that was clicked, instead of respecting
the newly triggered function.
It's a questionable use-case, as the clickedButton() is still
the original button e.g., but we should still avoid regressing
this, so we now emit the signals based on the newly stored
result code instead of using the clicked button as the source
of truth.
To allow this we had to change the opaque result() value for
custom buttons to stay out of the QDialog::DialogCode enum,
but this should be fine as the documentation explicitly says
that this is an opaque value.
Fixes: QTBUG-118226
Pick-to: 6.7 6.6 6.5
Change-Id: Ia2966cecc6694efce66493c401854402658332b4
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
That seems to be enough for me when trying to reverse-resolve host names
inside the corporate network.
Pick-to: 6.7
Change-Id: I6818d78a57394e37857bfffd17bc6b0ebd39f51b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Because QHostInfo is threaded, so if the look up times out and we exit a
given test, the results may still be delivered to the next test.
Especially if the next test is also about to time out -- in which case
it doesn't and prints a nonsensical output.
Before:
FAIL! : tst_QHostInfo::lookupIPv4(WithCache:literal_ip4) '!QTestEventLoop::instance().timeout()' returned FALSE. ()
Loc: [tst_qhostinfo.cpp(220)]
FAIL! : tst_QHostInfo::lookupIPv6(WithCache:aaaa-single) Compared values are not the same
Actual (tmp.join(' ').toLower()) : "192.0.2.1"
Expected (expected.join(' ').toLower()): "2001:db8::1"
Loc: [tst_qhostinfo.cpp(281)]
Now:
FAIL! : tst_QHostInfo::lookupIPv4(WithCache:literal_ip4) 'helper.waitForResults()' returned FALSE. ()
Loc: [tst_qhostinfo.cpp(278)]
PASS : tst_QHostInfo::lookupIPv6(WithCache:aaaa-single)
Pick-to: 6.7
Change-Id: I6818d78a57394e37857bfffd17bc66e241cab24d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replace public operators operator==() and operator!=() of QCborValue
to friend method comparesEqual().
Replace public operator<() of QCborValue to friend method
compareThreeWay().
Use QT_CORE_REMOVED_SINCE to get rid of current comparison methods
and replace them with a friend.
Delete #if 0 && __has_include(<compare>) blocks,
since they are not required anymore.
Task-number: QTBUG-120300
Change-Id: I884ff6ce2a71618b0e3eaa907f0852f93c2a073c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QOperatingSystemVersion intentionally does not define operator==() and
operator!=() since ae072cd9c4.
It means that we cannot use comparison helper macros.
Still, we can manually define four relational operators or
operator<=>() in C++20 mode, and give the class a partial ordering.
We choose partial ordering, because versions of different OS types are
incomparable.
Implement the operators in terms of helper function compareThreeWay(),
which potentially allows to use this class in some templated code.
As a drive-by: make the static compare() function noexcept, because
it really is.
Fixes: QTBUG-120360
Change-Id: Id4c9ce740e42baa719ca0ee84146d087b21675c6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTypeRevision consists of two quint8 values: major and minor version.
Each of the versions can be unknown.
The rules for comparing with the unknown version are as follows:
zero version < unknown version < non-zero version
At the same time, two unknown versions are considered equal.
This makes the comparison a bit tricky, but it still fits into the
category of strong ordering.
Replace the existing friend relational operators with helper functions
and comparison helper macros, making this type strongly ordered.
Update the unit-tests to use the new comparison helper test functions.
As the test functions check the reversed arguments as well, we can
reduce the number of rows for the data-driven comparison test.
Fixes: QTBUG-120359
Change-Id: Ib6f1037fc7b5fed148e35ee48b56b05dcd36b3b4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch simplifies the checks when migrating the class to comparison
helper macros.
Task-number: QTBUG-120359
Change-Id: I47a6ba20d3b89c31edc2f432621eae9385fbd0a3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Use WebDriverManager to install the correct version of chromedriver.
This will help avoiding mismatch of Chrome/chromedriver versions,
which sometimes happen in CI.
Fixes: QTBUG-122729
Change-Id: I40cf62c02c2cb6f57b031cc83b9fa38f6ed2610e
Reviewed-by: Simo Fält <simo.falt@qt.io>
Commit 90bc0ad41f ("QProcess/Unix: add
failChildProcessModifier()") added this line that set childStartedPipe
so that the failChildProcess() callback had something to write to. But
we left it set on exit from QProcessPrivate::startDetached(), which
caused the QProcess destructor to try and close it.
Noticed when debugging the issue for QTBUG-123083.
Pick-to: 6.7 6.7.0
Task-number: QTBUG-123083
Change-Id: I6818d78a57394e37857bfffd17bbc41c8400270f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It's the same aeshash() as before, except we're passing a template
parameter to indicate whether to read half and then zero-extend the
data. That is, it will perform a conversion from Latin1 on the fly.
When running in zero-extending mode, the length parameters are actually
doubled (counting the number of UTF-16 code units) and we then divide
again by 2 when advancing.
The implementation should have the following performance
characteristics:
* QLatin1StringView now will be roughly half as fast as Qt 6.7
* QLatin1StringView now will be roughly as fast as QStringView
For the aeshash128() in default builds of QtCore (will use SSE4.1), the
long loop (32 characters or more) is:
QStringView QLatin1StringView
movdqu -0x20(%rax),%xmm4 | pmovzxbw -0x10(%rdx),%xmm2
movdqu -0x10(%rax),%xmm5 | pmovzxbw -0x8(%rdx),%xmm3
add $0x20,%rax | add $0x10,%rdx
pxor %xmm4,%xmm0 | pxor %xmm2,%xmm0
pxor %xmm5,%xmm1 | pxor %xmm3,%xmm1
aesenc %xmm0,%xmm0 aesenc %xmm0,%xmm0
aesenc %xmm1,%xmm1 aesenc %xmm1,%xmm1
aesenc %xmm0,%xmm0 aesenc %xmm0,%xmm0
aesenc %xmm1,%xmm1 aesenc %xmm1,%xmm1
The number of instructions is identical, but there are actually 2 more
uops per iteration. LLVM-MCA simulation shows this should execute in the
same number of cycles on older CPUs that do not have support for VAES
(see <https://analysis.godbolt.org/z/x95Mrfrf7>).
For the VAES version in aeshash256() and the AVX10 version in
aeshash256_256():
QStringView QLatin1StringView
vpxor -0x40(%rax),%ymm1,%ym | vpmovzxbw -0x20(%rax),%ymm3
vpxor -0x20(%rax),%ymm0,%ym | vpmovzxbw -0x10(%rax),%ymm2
add $0x40,%rax | add $0x20,%rax
| vpxor %ymm3,%ymm0,%ymm0
| vpxor %ymm2,%ymm1,%ymm1
vaesenc %ymm1,%ymm1,%ymm1 <
vaesenc %ymm0,%ymm0,%ymm0 vaesenc %ymm0,%ymm0,%ymm0
vaesenc %ymm1,%ymm1,%ymm1 vaesenc %ymm1,%ymm1,%ymm1
vaesenc %ymm0,%ymm0,%ymm0 vaesenc %ymm0,%ymm0,%ymm0
> vaesenc %ymm1,%ymm1,%ymm1
In this case, the increase in number of instructions matches the
increase in number of uops. The LLVM-MCA simulation says that the
QLatin1StringView version is faster at 11 cycles/iteration vs 14 cyc/it
(see <https://analysis.godbolt.org/z/1Gv1coz13>), but that can't be
right.
Measured performance of CPU cycles, on an Intel Core i9-7940X (Skylake,
no VAES support), normalized on the QString performance (QByteArray is
used as a stand-in for the performance in Qt 6.7):
aeshash | siphash
QByteArray QL1SV QString QByteArray QString
dictionary 94.5% 79.7% 100.0% 150.5%* 159.8%
paths-small 90.2% 93.2% 100.0% 202.8% 290.3%
uuids 81.8% 100.7% 100.0% 215.2% 350.7%
longstrings 42.5% 100.8% 100.0% 185.7% 353.2%
numbers 95.5% 77.9% 100.0% 155.3%* 164.5%
On an Intel Core i7-1165G7 (Tiger Lake, capable of VAES and AVX512VL):
aeshash | siphash
QByteArray QL1SV QString QByteArray QString
dictionary 90.0% 91.1% 100.0% 103.3%* 157.1%
paths-small 99.4% 104.8% 100.0% 237.5% 358.0%
uuids 88.5% 117.6% 100.0% 274.5% 461.7%
longstrings 57.4% 111.2% 100.0% 503.0% 974.3%
numbers 90.6% 89.7% 100.0% 98.7%* 149.9%
On an Intel 4th Generation Xeon Scalable Platinum (Sapphire Rapids, same
Golden Cove core as Alder Lake):
aeshash | siphash
QByteArray QL1SV QString QByteArray QString
dictionary 89.9% 102.1% 100.0% 158.1%* 172.7%
paths-small 78.0% 89.4% 100.0% 159.4% 258.0%
uuids 109.1% 107.9% 100.0% 279.0% 496.3%
longstrings 52.1% 112.4% 100.0% 564.4% 1078.3%
numbers 85.8% 98.9% 100.0% 152.6%* 190.4%
* dictionary contains very short entries (6 characters)
* paths-small contains strings of varying length, but very few over 32
* uuids-list contains fixed-length strings (38 characters)
* longstrings is the same but 304 characters
* numbers also a lot contains very short strings (1 to 6 chars)
What this shows:
* For short strings, the performance difference is negligible between
all three
* For longer strings, QLatin1StringView now costs between 7 and 17% more
than QString on the tested machines instead of up to ~50% less, except on
the older machine (where I think the main QString hashing is suffering
from memory bandwidth limitations)
* The AES hash implementation is anywhere from 1.6 to 11x faster than
Siphash
* Murmurhash (marked with asterisk) is much faster than Siphash, but it
only managed to beat the AES hash in one test
Change-Id: I664b9f014ffc48cbb49bfffd17b045c1811ac0ed
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
So that it hashes to the same value as QString{,View}.
In order to test this, you must either run on a CPU other than ARM and
x86, or disable the AES hasher. I did that and can confirm siphash and
murmurhash do work with on-the-fly conversion from Latin-1.
Change-Id: I664b9f014ffc48cbb49bfffd17b03e5e62ec4e89
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This complements the previous commit by adding the heterogeneous lookup
in operator[]. Unlike the members of the previous commit, this one may
insert into the hash, in which case it needs a way to cast from the
heterogeneous type K to the actual Key type.
Change-Id: I664b9f014ffc48cbb49bfffd17b037c1063dfb91
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This implements support in QHash and QMultiHash for lookups of
heterogeneous key types that produce the same hash value. This is
implemented by duplicating each of the following functions into an
overload on Key and one a template that is enable_if-constrained to a
key type that meets the requirement:
* contains
* count
* equals_range
* find
* operator[] (const only)
* remove
* take
* value
* values (QMultiHash)
The non-const operator[] may insert into the hash, so it's not part of
this commit.
Change-Id: I664b9f014ffc48cbb49bfffd17b037852f0fd192
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This merges the tempFile and caching tests, which had been updated in
commit ae03ffaffd to attempt other
filesystems than APFS and btrfs.
Instead of adding yet another item to the list (xfs), let's insist by
writing more and flushing the OS buffers. Local testing says that btrfs
usually updates after the first write(), no later than the second, and
that APFS and XFS "just works" now (without the fsync() even).
Pick-to: 6.7
Fixes: QTBUG-123151
Change-Id: I6818d78a57394e37857bfffd17bbe7427307efc4
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
By using "wt" for all OS's; according to Thiago the 't' is ignored
everywhere except on Windows.
tests/auto/corelib/io/qfile/tst_qfile.cpp:2846:70: warning: comparison
between ‘enum QOperatingSystemVersionBase::OSType’ and ‘enum
QOperatingSystemVersion::OSType’ [-Wenum-compare]
2846 | const char *openMode = QOperatingSystemVersion::current().type() != QOperatingSystemVersion::Windows
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Amends 3446313c7a
Pick-to: 6.7 6.6 6.5 6.2
Change-Id: I310d7d6ce3833756ffdc47b000e052ef3afdfdef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The relational operators were removed in
8652c79df0 with the argument that they
do not have a total order. Back than it was a valid argument, because Qt
did not support any of the C++20 ordering types.
Now Qt has its own implementation for all three ordering types, so we
could technically add relational operators and claim that QVariant
provides partial ordering.
However, that could potentially lead to many bugs and/or unexpected
results, if people start using QVariant as a key in std::map/QMap
containers.
We do not want that to happen, so we only use the helper macros to
implement (in)equality operators.
This commit also extends the unit tests, providing more extensive
testing of (in)equality operators and the pre-existing
QVariant::compare() method.
Fixes: QTBUG-113234
Change-Id: I783f3b5df552da782627f4ed0a5bb1b577753a23
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have to be able to strip the _SRGB nonsense from the render target
view formats when rendering into textures that are provided from an
external engine (e.g. OpenXR) and are forced onto us with formats such
as VK_FORMAT_R8G8B8A8_SRGB.
This highlights some limitation of the current system, which has very
limited handling of sRGB stuff since proper renderers such as Qt Quick
3D have first class support for linearization and converting to sRGB
at the end of their shading pipeline, so _SRGB format textures are
never used in practice.
OpenGL has an issue which is different from everything else, namely
that we do not correctly do the glEnable/Disable on GL_FRAMEBUFFER_SRGB.
The QOpenGLExtensions flag is not what we need. We need to know if the
sRGB-conversion-on-write is supported or not, not that some framebuffer
is sRGB-capable. So do our own query based on the desktop and the ES
extension (GL_EXT_sRGB_write_control is something we never checked for,
but that is the appropriate GLES extension, supported on the Quest 3
for instance) This is now corrected in the gl backend. This means that
the colors will no longer be "too bright" with OpenGL ES and multiview
on the Quest 3 for example.
Unlike OpenGL, Vulkan and D3D automatically convert in shader reads and
writes when the shader resource view or the render target view has a
_SRGB format. (which we get by default since we pass on the texture
format) Getting a second linear->sRGB conversion on the already sRGB
data generated by e.g. Qt Quick 3D is just wrong.
Allow solving this by a new function that can be optionally called to
say we want (RGBA8, srgb=false), i.e. VK_FORMAT_R8G8B8A8_UNORM, for
the views.
Of course, reality is more complicated. D3D11 for instance does not
allow "casting" a fully typed texture, we'd need to use a _TYPELESS
format for that (possibly with other consequences), so skip D3D11.
For D3D12 this should work from Windows 1703 on.
Implementing for Metal is also left as a future exercise - it is neither
needed at the moment within Qt, nor is it trivial, because view textures
have to be created explicitly in Metal, normally we just work with the
MTLTexture as-is, not with views.
Task-number: QTBUG-122288
Task-number: QTBUG-122614
Change-Id: I8aea4e892b308d48f0bf18bdef481e460fbc9d47
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Versionless targets in Qt6 are interface libraries that link the
versioned libraries using the INTERFACE link type. This makes the
linking chain more complicated than it can be. Also we miss some
significant interface properties in the versionless targets comparing
to the versioned targets.
The new approach manually generates the versionless targets, instead
of using CMake exports.
For CMake versions < 3.18 we now create a copy of the versioned
targets. The copy includes all the relevant INTERFACE properties from
the versioned targets and imported locations for all configs.
For CMake versions >= 3.18 we now create the versionless target ALIASes
which should behave give the transparent access to the versioned
targets.
Using the QT_USE_OLD_VERSION_LESS_TARGETS flag you may force the
behavor of the CMake versions <= 3.18
The change is partial workaround for QTBUG-86533.
Task-number: QTBUG-114706
Change-Id: Iafadf6154eb4912df0697648c031fcc1cbde04e0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Because we will do a small wait after the final connection (to see
if there are any unexpected extra connections) we can save some time
by reducing _how long_ we wait for it.
In general we only need an extra long wait for the first connection,
subsequent connections are faster.
So we change the loop structure from looping until we hit 20(!)
connections, when anything larger than 6 will fail the test anyway!
And use qWaitFor instead of repeatedly calling enterLoop and checking
the state of an ElapsedTimer, the total wait time is not super
interesting, and made it a guarantee that the test would take 10
seconds.
While we are here, update the attribute we use to test HTTP/2
connections. We were previously enabling http/2, but this is the new
default so it's not needed. We do, however, need to enable h2c if we
want to see it trying to upgrade to http/2 over cleartext.
Not a big issue, so we don't pick it very far back.
Pick-to: 6.7
Change-Id: Ia314ae2827ab8a8baaa4af2c5136c5e531bcb1f8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
I don't know what it is but it's not 1, because it is quite
often flaky in these tests. A single failure leads to deadlock
that takes 5 minutes to fail. Then a rerun might do another
5 minutes and fail the integration, or it will pass but take
longer to do so.
Pick-to: 6.7 6.6 6.5
Change-Id: I188276df7800b00a20dbe39edee91c582f0a82a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were a few issues to deal with. One of them was that we would
print a warning about an internal error if we tried to *set* an error
on the reply after it had been cancelled. That's kind of unavoidable
since these things happen in different threads, so just ignore the
error if we have been cancelled.
The other issue was that, for a request with data, we will buffer the
data to send, and _only then_ do we start the request. This happens
asynchronously, so the user can abort the request before it has finished
buffering. Once it finished buffering it would set the state of the
request to "Working", ignoring that it was already marked "Finished".
Fixes: QTBUG-118209
Fixes: QTBUG-36127
Pick-to: 6.7 6.6
Change-Id: Idbf1fd8a80530d802bee04c4b0a6783cba4992d3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For some reason android in CI failed to include the
moc file through the mocs_compilation file.
It's an issue that needs some investigation, but
in the interest of time just include the moc file
directly.
Pick-to: 6.7 6.6 6.5
Change-Id: I079588598a6f4137ef1fccc482795d703b59bc6e
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Amends 8af346c1f6 and
1d9137e13f.
Found in 6.7 API review
Task-number: QTBUG-123115
Pick-to: 6.7 6.7.0
Change-Id: I98d79274f26f3439302a59181401b6e244fe5202
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Retrieve the default value (if set) of a column during
QSqlDatabase::record() but not for QSqlQuery::record() as it's done for
the other drivers which support retrieving the default column value.
Fixes: QTBUG-122723
Change-Id: I92e052bfa6d88e019c0151fbcbc1483a65770c55
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
A QDialogButtonBox with the first accept button becoming default, didn't
explicitly set focus on such a button in a QDialog.
d44413d526 implemented this missing
functionality. It set focus to the automatic default button, unless the
QDialog had a focusWidget() set.
That has caused a regression, in cases where
- the QDialog has a QWidget child with a Qt::StrongFocus policy, and
- the QDialog is not yet visible, so focusWidget() returns nullptr.
Amend d44413d526ec12ed83acd7343c2005782178c7ad:
Implement a helper in QWidgetPrivate, that returns true, if a child
with a given focus policy is found.
Do not set focus to a QDialogButtonBox's automatic default button, when
- not located inside a QDialog, or
- a focusWidget() exists, or
- the dialog has QWidget child with Qt::StrongFocus, that is not a
child of the QDialogButtonBox.
Add an autotest function.
Pick-to: 6.7 6.6 6.5
Fixes: QTBUG-121514
Fixes: QTBUG-120049
Change-Id: I3c65ae36b56657f9af4a3a4b42f9b66e8bc5c534
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This finishes off ICC color space support in Qt (short of the
optional multi process elements), and includes necessary parts for
potential CMYK support (PCSLab and A2B support)
[ChangeLog][QColorSpace] ICC profiles that are not three-component
matrix based are now supported.
Task-number: QTBUG-108175
Change-Id: Ie29b17a366d9ba0ea8135e1752530d6bb19e7520
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The function replaces one of the found entries with the new value,
and removes any other entries. If no entries are found, a new entry
will be appended. The replacement search is done for performance
reasons; it's cheaper to replace an existing value.
All in all the function is a more convenient and performant
alternative for this sequence (which proved to be common while
porting QtNetwork internals to QHttpHeaders):
header.removeAll(<headername>);
header.append(<headername>, <value>);
[ChangeLog][QtNetwork][QHttpHeaders] Added replaceOrAppend()
convenience method, which either replaces previous entries with
a single entry, or appends a new one if no entries existed
Fixes: QTBUG-122175
Change-Id: I03957645d7e916a732ac7b8d3ae724bb6b16af87
Reviewed-by: Lena Biliaieva <lena.biliaieva@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Example takes precedent over build system file type.
According to QUIP-18 [1], all examples file should be
LicenseRef-Qt-Commercial OR BSD-3-Clause
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: Id348a89884bb309b96abb31077f14a51086b5d0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
The variadic templates are supposed to be removed from the
overload set when any of the parameters is a literal string type,
as otherwise we get conflicts with the legacy overload taking
class names and signatures as const char *. The detection of
a literal string types was missing a few specializations, so that
we ended up with the wrong overload being called, and class
names getting interpreted as method names instead.
Add the missing specializations, and add more test coverage
for using the old overloads.
Task-number: QTBUG-122235
Pick-to: 6.7
Change-Id: I5488f2009c8f62d74fac6754844f57cf64011414
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Lauri Pohjanheimo <lauri.pohjanheimo@qt.io>
The class had operator==(), operator!=() and operator <() defined as
public member functions, so use QT_CORE_REMOVED_SINCE and
removed_api.cpp to get rid of these methods and replace them with hidden
friends.
Use QT_TEST_ALL_EQUALITY_OPS macro in unit-tests.
Use new \compares command in the documentation to describe the
comparison operators provided by QUrl.
Task-number: QTBUG-120303
Change-Id: Ic4fa2335292cc4b75ad2373832c0b89d768f529c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Specifically, don't use it for either of the x86-64 ABIs (LP64 and
ILP32). The generic case below should work for everyone.
Fixes: QTBUG-122720
Pick-to: 6.7
Change-Id: I01ec3c774d9943adb903fffd17b75fc79095e089
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
P2447 has been merged in C++26, backport the same functionality.
This makes QSpan<const T> a proper replacement for a const QList<T>&
parameter, because now both can be built via a braced-init-list.
// void f(const QList<int> &l); // old
void f(QSpan<const int>); // new
f({1, 2, 3}); // now OK
This is, technically speaking, SiC: in the presence of both `f`
overloads, the code above would have called the QList one. Now instead
the call is ambiguous.
We've been there already -- this is QString and QStringView all over
again, and the solution is the same: get rid of the owning container
overload. I'd rather have this construction *sooner* rather than *later*
in order to minimize the fallout.
And just like QString vs QStringView, there's nothing really doable to
prevent instant-dangling situations:
QStringView v = getString(); // dangles
QSpan<const int> s = {1, 2, 3}; // ditto
except for using QSpan (QStringView) as a *parameter type only*.
Note that QSpan with dynamic extent was already convertible from
std::initializer_list through its ranged constructor. However this fact
alone doesn't unlock the above syntax. QSpan with a static extent was
also convertible for the same reason. (This is non-standard:
std::span's range constructor for static extents is explicit, but QSpan
doesn't follow that design choice and makes the constructors implicit
instead.)
Found in API-review.
Pick-to: 6.7
Change-Id: I160ab5b292b0c2568cd9a7ad1b4430085f475c29
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If a markdown file has FrontMatter, we look for the end of the newlines
after the `---` marker to begin parsing the actual markdown. But check
bounds in case the file contains only front matter and not markdown.
Fixes: QTBUG-122982
Change-Id: I09c4ae90c47ebd84877738aecc1d1cad0b0bfca2
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Before this fix, such screens would not render due to requestUpdateHold
is initialized to true and never reset.
The fix is to change the requestUpdateHold member to be a static
variable, so that it can be read by screens added after
requestUpdateHold has been called.
Also, add a test that would fail without this fix
Change-Id: Idf2ac916766a03480272cd550f9d1ab7fc5c5158
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
According to QUIP-18 [1], all tests file should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Task-number: QTBUG-121787
Change-Id: Iee9f4fca676e77ab9d8ed485a28ce5ea8803be15
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
According to QUIP-18 [1], all tools file should be
LicenseRef-Qt-Commercial OR GPL-3.0-only WITH Qt-GPL-exception-1.0
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: Icd5d5be2e04819617e68ff142924de1773bebbad
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
According to QUIP-18 [1], all test files should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: If06da73cecbbf718338d1b785b5eca36ac819ccb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Try to avoid writing anything that the parser would misinterpret.
Escape pre-existing backslashes, but not those that are already escaped.
Optimize maybeEscapeFirstChar() slightly and apply it to every line
of output (except in code blocks), not only to new lines created by
word-wrapping.
Since it would be hard to do this without using regular expressions,
the markdown writer feature now depends on the regex feature.
Fixes: QTBUG-96051
Fixes: QTBUG-122083
Pick-to: 6.7
Change-Id: I8d95366501fd31441829081c668f11a3a3a23fe2
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This reverts commit c41733b06b.
Based on the Grafana data, last flaky was August 14, 2023, and
the test works fine on local vm with stressed cpu.
Fixes: QTBUG-115598
Pick-to: 6.7 6.6 6.5
Change-Id: I634598d20a581d4d1443a3fd81e1e9481bfa2545
Reviewed-by: Inho Lee <inho.lee@qt.io>
Which will be used to represent timer IDs. Thanks to Marc for the idea
to use "a strongly typed int".
QTimer got a new id() method that returns Qt::TimerId (can't overload
timerId()). Various classes in qtbase have a member named timerId(), but
a new method is needed anyway in QTimer so id() it is (this is the
reason QChronoTimer only has id() and no timerId()). Besides
timer.timerId() has an extra "timer".
This commit fixes the inconsistency between QObject using `0` timer id
to indicate "failed to start", while QTimer::timerId() returned `-1` to
indicate "timer is inactive". QTimer::id(), being a new method and all,
now returns Qt::TimerId::Invalid, which has value `0`, so that the
values match between the two classes. Extend the unittests to ensure
QTimer::timerId()'s behavior is preserved.
[ChangeLog][Core][QObject] Added Qt::TimerId enum class, that is used to
represent timer IDs.
Change-Id: I0e8564c1461884106d8a797cc980a669035d480a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The interval in QTimer is a QProperty of type int, which means it's
limited to the number of milliseconds that would fit in an int (~24
days), this could cause overflow if a user constructs a QTimer with an
interval > INT_MAX milliseconds. And it can't be easily changed to use
qint64/std::chrono::nanoseconds:
- changing the getters to return qint64 means user code would have
narrowing conversions
- the bindable QProperty interval can't be changed to qint64 during
Qt6's lifetime without the risk of breaking user code
- adding a new bindable QProperty that is qint64/nanoseconds is an
option, but it has the complication of what to do with the int
interval; set it when setInterval(milliseconds) is used by using
saturation arithmetic? and what about notifying observers of the
changed interval?
Thus the idea of creating a new stop-gap class, QChronoTimer, as a
cleaner solution. Both classes use QTimerPrivate.
During the lifetime of Qt6, QTimer's interval range is about 24 days,
whereas QChronoTimer's interval range is about 292 years
(duration_cast<years>nanoseconds::max()).
Currently the plan is to fold QChronotTimer back into QTimer in Qt7.
Mark all QPropertyS in the new class as FINAL since they aren't
intended to be overridden; this offers a performance boost for QML[1].
[1] https://lists.qt-project.org/pipermail/development/2024-February/044977.html
[ChangeLog][QtCore] Added QChronoTimer, which uses a
std::chrono::nanoseconds intervals, as a replacement for QTimer.
Fixes: QTBUG-113544
Change-Id: I71697f4a8b35452c6b5604b1322ee7f0b4453f04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Ultimately this is the best way to keep the log history of the code.
Change-Id: I3413deffdb093a3239d65b6ca939e744224e722a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Then we will automatically handle invalid leading characters instead
of throwing away the whole sequence when it cannot be converted.
Added a test that was failing before.
Drive-by change: add a comment explaining why we
have the stack allocated buffer.
Task-number: QTBUG-118834
Change-Id: I647a58f2ba95e2e7ed4ea6a964d99ecc0c91fad3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some machine in CI is failing some of these sometimes and
I would like to know by how much.
Pick-to: 6.7
Change-Id: I88b41d5cde81419f7c11f7038101962630eb31ef
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The current logic that we will disable the read notification if we
have any data at all doesn't make sense for users who use the
receiveDatagram functionality, since they will not make any calls
that trigger the read notifier to be re-enabled unless there is a
datagram ready for us to hand back.
Fixes: QTBUG-105871
Pick-to: 6.7 6.6 6.5
Change-Id: I0a1f1f8babb037d923d1124c2603b1cb466cfe18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDomText::splitText() needs to unref() the newly created QDomText
instance as it does not use it by itself
Pick-to: 6.7 6.6 6.5 6.2 5.15
Fixes: QTBUG-40561
Change-Id: I593011b63c39f2310204d97ec61da7cf78a0fc14
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Also extend unit-test to use new test helper functions.
Remove the now-redundant test for three-way comparison, because it is
covered by the test helper functions.
Task-number: QTBUG-117661
Change-Id: I242b560c281245e04e34353c80000a20998fc677
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Replace the existing friend relational operators with the macros.
Add the previously-missing relational opertors with QChar and char16_t.
This allows to remove the last dummy relational operators and the
macros to generate them in tst_qstringapisymmetry.
Because of a bug in libstdc++[0], we have to explicitly keep the
QBA vs QBA relational operators even in C++20 mode. This problem is
specific to QByteArray, because it is convertible to const void *.
[0]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=114153
Task-number: QTBUG-117661
Change-Id: Iac7f81cd3274331b7c7695a51803321b511361c0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace the existing friend relational operators with the macros.
Add the previously-missing QChar vs `const char *` relational operators.
These require out-of-line helper methods, because we need to interpret
the `const char *` array as utf-8.
The `const char *` relational operators cause ambiguities when
comparing QChar with 0 (previously it was only handled by the nullptr_t
overloads). As we have it in several places in our tests, I'd assume
that the users can also do it. To resolve the ambiguities, mark the
new relational operators as Q_WEAK_OVERLOADs.
This allows to remove the dummy QChar vs `const char *` relational
operators from tst_qstringapisymmetry, but at the same time requires
that we introduce new dummy operators for QByteArray vs char16_t
comparison. These will be fixed in a follow-up patch.
For QLatin1Char - convert to uchar before doing the comparison, to
match the behavior of QLatin1StringView and QChar. Extend QChar's
unit tests.
Task-number: QTBUG-117661
Change-Id: I9213fe05a5efdb96d48688f07bec9519f9887a77
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows to remove the dummy relational operators from
tst_qstringapisymmetry.
Task-number: QTBUG-108805
Change-Id: I7cb3154d6fcb571cafab6b318806f74bc8300448
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add QU8SV vs QSV, QU8SV vs QChar, and QU8SV vs char16_t relational
operators.
This allows to get rid of the dummy relational operators in
tst_qstringapisymmetry.
Task-number: QTBUG-117661
Change-Id: If95d7418efd13c505ed0e3bef748b86ff55e623a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The comparison with QStringView works as is, there is no need to add
explicit operators.
Add the missing relational operators with QUtf8StringView. Once it
is added, comparison of QString with u8"string literal" becomes
ambiguous, so explicitly add operators for `const char8_t*` as well.
This also makes the comparison with u8 string literals faster,
because it now uses a view instead of constructing a QString.
Adding QUtf8StringView overloads also makes comparison with
`const char *` ambiguous if QT_RESTRICTED_CAST_FROM_ASCII is defined.
To fix that, mark the overload as Q_WEAK_OVERLOAD. Luckily, we can
just use the third Attributes parameter of the macro for that.
Provide more unit-tests to cover the new relational operators.
Task-number: QTBUG-117661
Change-Id: I60d1f4ad7ea607472deeb5c250e62f2bb7019268
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the comparison helper macros to replace the member relational
operators for comparison with QByteArray and const char *.
As QString and QByteArray are exported, we cannot simply remove the
inline methods, so wrap them into QT_CORE_REMOVED_SINCE.
Add relational operators with QByteArrayView.
Provide more unit-tests for the comparison with the byte array types.
This enables operator<=> for QString vs byte arrays in C++20 builds.
Task-number: QTBUG-117661
Change-Id: I305343e1b6c5d78b10f2976573db4e904ba6b44b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace the hidden friend relational operators with hidden friend
helper functions and comparison helper macros.
Provide more unit-tests for the updated types.
This enables operator<=> in C++20 builds.
Task-number: QTBUG-117661
Change-Id: I17329cd6422f272a435fc1da241203581eef7fbb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make QHttp2ProtocolHandler discard all informational (1xx) replies with
the exception of 101.
According to RFC 9110:
"A client MUST be able to parse one or more 1xx responses received
prior to a final response, even if the client does not expect one.
A user agent MAY ignore unexpected 1xx responses."
Fixes: QTBUG-121755
Change-Id: I8b8d578f23d4fbe28929f8c54b3607bcaf85405f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
For accessing the RHI managed by the widget compositing machinery.
Pick-to: 6.7 6.6 6.5
Change-Id: Ia3c1227cc2d9cfebe95611cad3dbcd7aa6f6f8c7
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
It was added for Android in a4f50269f8,
for the case of QSurface::RasterGLSurface, but since 6.4 we no longer
use QSurface::RasterGLSurface for composition. And the Android usage
was removed in 2020ce5fd2.
Pick-to: 6.7 6.6 6.5
Change-Id: I8dafe959c54e09b3a974253e15d184365141d559
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Even though undocumented, it's public API, doesn't hurt to carry
along, and improves compiler coverage in the test, so let's not remove
it.
Found in 6.7 API review
Amends 95e6fac0a5.
Pick-to: 6.7
Change-Id: Ia935036a69e0e678f22ac86b48a2c1c5e8c46733
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If we see a closing tag that really demands a new block after it,
like </ul>, that needs to be done even if some ignorable whitespace
and "inline" tags come after it. Don't get distracted by those.
Also add a comment in QTextDocument::setHtml() to remind the reader that
HTML parsing is a two-pass algorithm.
Pick-to: 6.6 6.7
Fixes: QTBUG-81662
Change-Id: If723c9d3c211a684725055a06bcf87be4e38923a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Both QByteArrayView and std::string_view are Literal Types, so the
conversion between them should be constexpr.
Amends 96d67da420.
Found in API-review.
Pick-to: 6.7
Change-Id: Ic513ce32aa2a743ca890dc05a683a62c0f3a7d50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
The method traversed QDockAreaLayoutInfo::item_list, to identify
dock widgets tabbed with the QDockWidget argument in a tab bar
It relied on bool QDockAreLayoutInfo::tabbed, which is set to true, when
a QMainWindowTabBar is to be added to a QDockAreaLayoutInfo. This flag
isn't cleared, when the second last dock widget is removed from the
tab bar. It can't be replaced by QMainWindowLayout::isDockWidgetTabbed,
because the flag also represents intermediate states, where e.g. a dock
widget is hovered over, prepares to become a floating tab and then rolls
back, because hovering doesn't result in a drop. In that case, tabbed
must become true, which the dock widget isn't actually tabbed.
Furthermore, the way to traverse item_list didn't find dock widgets
in a floating tab. In that case, tabifiedDockWidgets() wrongly returned
an empty list.
To fix both issues, refactor QMainWindow::tabifiedDockWidgets() to read
the list of dock widgets directly from the QMainWindowTabBar.
Add tests in tst_QDockWidget::floatingTabs() and
updateTabBarOnVisibilityChanged()
Fixes: QTBUG-122001
Pick-to: 6.7 6.6 6.5
Change-Id: Ia9eb3711be642101261f34ee447521cc6accc20c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Test how QTextMarkdownImporter reacts to paragraphs ending with
premature LFs (created by shift-Enter in QTextEdit, for example) and
paragraphs broken by Unicode LineSeparator characters. It turns out that
the u2028's are retained and have the desired effect for rendering.
Currently we don't distinguish auto-wrapped paragraphs from paragraphs
that the user broke manually in QTextEdit (because we use a plain
newline for both).
Task-number: QTBUG-121475
Change-Id: Icaca4dba8be03b37ad6faa40ce1f9dfceadc48a8
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
Previously, querying Qt::ImEnabled only returned the value of
isEnabling(), which is incorrect for edit widgets with read-only
properties set, as Qt::ImEnabled indicates whether text can be *input*
through the input method, which results in the IM being able to insert
text into read-only edit widgets.
The fixed version uses both isEnabling() and isReadOnly() values to
determine whether input methods need to be enabled. For some platforms
(like iOS and Android) that rely on IM to select text, a check for
ImReadOnly has been added to their QPA plugins to enable handles on
read-only input boxes.
At the same time, the imEnabledNotImplemented function in the test file
tst_qwidget was modified, since ImEnabling should give a _false_ value
when a lineedit is read-only.
Task-number: QTBUG-105009
Task-number: QTBUG-110838
Task-number: QTBUG-119182
Pick-to: 6.7 6.6 6.5
Change-Id: Ia2abcdb3200826d567f90447d4f8b71d0ef1fbf0
Reviewed-by: Yansheng Zhu <670429759@qq.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Make the benchmarks more comparable:
- Store the QDir::Filters in one central var, this way it's the same in
all the call sites
- Add a `bool forceStat`, when true force calling stat(), either
explicitly in posix_helper(), or implicitly in Qt classes by e.g.
calling a QFileInfo method that would have to call system stat()
internally. Otherwise benchmarking readdir()/dirent showed bigger
times, which was mostly due to the explicit stat() calls, whereas we
can use dirent::d_type (on the platforms where it's available)
Drive by change: for std::filesystem::recursive_directory_iterator, set
skip_permission_denied option and use the non-throwing constructor.
Change-Id: Icf138a5dc41d32741c1be611d664b01008b2f3fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This class offers a forward-only const_iterator, that matches the system
low-level functions' logic (e.g. readdir()/dirstream logic). This
iterator is a std::input_iterator_tag.
QDirIterator uses Java-style iterators that have a couple of issues:
- They don't fit the logic of the underlying native system functions
(readdir()/__dirstream and co.), there is no way to know if there is a
next entry except by advancing the iterator (calling readdir()) first
- As a consequence of the above, two QFileInfo objects, current and next,
had to be used to fit that paradigm; and the code always
iterated/stat'ed an extra entry past the one we want, e.g. when
filtering
The next step is porting QAbstractFileEngineIterator and its subclasses
to be like QFileSystemIterator, i.e. replace hasNext()/next() with a `bool
advance()` virtual method. This is easier to reason about than the
Java-style iterators, and is more in-line with the new class.
Discussed-on: https://lists.qt-project.org/pipermail/development/2023-December/044745.html
Change-Id: I8e696cefdca18d8c78f803efdb83a73dd43eb720
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To make it easier to follow the history in git.
Change-Id: I094056c1ec130aeef77aa2d20289ab766bc25083
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Rename the toType() overloads taking an out-parameter to appendToType(),
because that gives a better understanding of the usecase.
Found in 6.7 API review
Amends 8af346c1f6 and
1d9137e13f.
Pick-to: 6.7
Change-Id: Ic1a462e9507123a59e6086bfb48b8b61ab79abb8
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When hiding a widget that has focus we try to focus the next widget in
the focus chain by running focusNextPrevChild. The abstract item view
overrides this to step the items but does not account for this hide case
which makes focusing not only not work, but also by hiding the widget
the selection in the item view gets changed.
Pick-to: 6.7 6.6 6.5
Change-Id: I29d40a1fb86ced60ec742b2753a87383846a89b3
Reviewed-by: Viktor Arvidsson <viktor.arvidss@gmail.com>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][QtCore][QString/QByteArray] Added slice() methods that work
like sliced(), but modify the string/byte-array they are called on.
Task-number: QTBUG-99218
Change-Id: I3075562983ef123d9aa022a2304c7e774cf2ea42
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changed type of `id`, `int` -> `size_t`, to match `liveCount`, in
`CountedObject` struct.
Fixes: QTBUG-122301
Change-Id: I85513d5ff6a4f0c3fb53f77e55c43b1284d1b1a8
Reviewed-by: Matthias Rauter <matthias.rauter@qt.io>
Change type of variables `int` -> `size_t`, to match assigned value.
Fixes: QTBUG-122300
Change-Id: I5b99bd6a3b307ba2ec4ef79bcc517da60ae36413
Reviewed-by: Matthias Rauter <matthias.rauter@qt.io>
Since the Android emulator on CI is running without hardware accelerated
graphics, showing the widget can take almost the same time as the timeout
for exiting the app with the "wrong" exit code 1. If running on Android,
increase the timeout to 1000 ms to avoid flaky failures. Un-blacklist
tst_QApplication::abortQuitOnShow() since the random failures are
taken care of by this patch.
Task-number: QTBUG-122693
Pick-to: 6.7
Change-Id: Id52ae15b3ab2dbdaf4924b675276dfe3a4168585
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
One more method for STL compatibility.
This one is particularly subtle as it's required by the
`reservable-container` concept:
https://eel.is/c++draft/ranges#range.utility.conv.general-3
Without this concept, ranges::to won't reserve() before copying the
elements (out of a sized range which isn't a common_range).
Implementation notes: there were already a couple of constants denoting
the maximum QByteArray and QString size. Centralize that implementation
in QTypedArrayData, so that QList can use it too.
The maximum allocation size (private constant) needs a even more central
place so that even QVLA can use it. Lacking anything better, I've put it
in qcontainerfwd.h.
Since our containers aren't allocator-aware, I can make max_size() a
static member, and replace the existing constants throughout the rest of
qtbase. (I can't kill them yet as they're used by other submodules.)
[ChangeLog][QtCore][QList] Added max_size().
[ChangeLog][QtCore][QString] Added max_size().
[ChangeLog][QtCore][QByteArray] Added max_size().
[ChangeLog][QtCore][QVarLengthArray] Added max_size().
Change-Id: I176142e31b998f4f787c96333894b8f6653eb70d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The "HTTP RFC 9110 5.3 Field Order" states that the values combined
with comma can be followed up by an optional whitespace, and for
consistency recommends "comma SP". This is also what eg. 'MDN Web
Headers' class does.
Fixes: QTBUG-122650
Pick-to: 6.7
Change-Id: I3391c86018090f0b8721929b64a7e3029e98ac85
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
As the comment says, on most RISC platforms, the return address need not
be on the stack in the first place. In fact, in all ones currently
supported by Qt, it's passed in a register to the callee, which has the
option of simply saving it in a callee-save register when calling leaf
functions. Even if it is using a frame pointer, the compiler can simply
use any register. That means unwinding the stack is not possible in the
absence of either debug information or stack-unwind information, neither
of which backtrace(3) will use.
Strictly speaking, even on x86 the compiler can use the RBP register for
any purpose and thus make getting the backtrace() impossible, but in
practice it seems to work.
Fixes: QTBUG-121389
Pick-to: 6.7
Change-Id: I5dd50a1a7ca5424d9e7afffd17acbd01ef916f5d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Otherwise we end up appending and modifying the shared object.
Pick-to: 5.15 6.5 6.6 6.7
Task-number: QTBUG-122704
Change-Id: I01ec3c774d9943adb903fffd17b692c2e6d53e97
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add implict constructor, treat the list like any other container.
Simplify the test code, and explicitly constructor-initialize when
we want an array and might have an array, so that we don't end up
with constructing arrays of arrays.
Change-Id: I14615f897cf8a2188510cfe1085ffc70a2396d5d
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_baseline_painting and tst_qpdfwriter rely on QT_FEATURE_pdf being
enabled, without making it a condition to build the tests.
Don't build the tests with PDF disabled.
Task-number: QTBUG-122137
Pick-to: 6.7 6.6 6.5
Change-Id: Idbf03f30557618c83e946a80b7759cd4f6978ad5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The method removed from QWidgetList widgets in a ranged for loop.
That caused items being skipped.
Create a new list by adding positives, instead of removing negatives
from the original.
This amends b1802a164b.
Pick-to: 6.7 6.6
Change-Id: I3f329290187ddc76169ababe8ffa6059d953212d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The function now support two new arguments:
- DEFINITIONS, which allows specifying the custom definitions
- TARGETS, the list of targets thart will be used to collect
the [INTERFACE_]INCLUDE_DIRECTORIES and COMPILE_DEFINITIONS.
Task-number: QTBUG-104898
Change-Id: I3f67537057f91a97597788f1bd4db6904bac6d9c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QUrlQuery had operator==() and operator!=() defined as public member
functions, so use QT_CORE_REMOVED_SINCE and removed_api.cpp to get
rid of these methods and replace them with a hidden friend.
Use QT_TEST_ALL_EQUALITY_OPS macro in unit-tests.
Use new \compares command in the documentation to describe the
comparison operators provided by QUrlQuery.
Task-number: QTBUG-120303
Change-Id: I083487a134887010ebbb78906d2c1982f2ad41b5
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Since we support QString and QList specializations, we should also
support QStringList directly. That's a bit more involved as we need
to specialize the code path for QString, which is not convertible to
or from jobject. But once we have mapped the type to jstring it
follows the implementation for lists of objects.
We now need to generate temporary local references when
converting a QString to a jstring, so manage a local frame. We do
so explicitly in chunks of 100 local references.
Change-Id: I7ae5cf7d0ba0099992c36f3677980c346526804b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This didn't work yet because the partial specialization of the
JNITypeForArgImpl factory was missing. Add a test case for
QJniArray<double> and QList<double>.
What doesn't work (yet) is QStringList for a native Java function
taking a String[]. That will be added in a follow-up commit.
Change-Id: I4d3fa0ecc04b98b9749f8358792f86c02ddbbc14
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The test has been very flaky recently. A zero timer might be processed
before the window became visible, so only start closing once the window
has been shown.
Pick-to: 6.7 6.6
Change-Id: If7983723bb8abd2f3495fb21114c517289ebe8d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Replace operator==() and operator!=() private friends with
comparesEqual().
Use QT_TEST_ALL_EQUALITY_OPS macro in unit-tests.
Use new \compares command in the documentation to describe the
comparison operators provided by QStorageInfo.
Task-number: QTBUG-120303
Change-Id: I6434dc8382f6554b9e60840bac4abaeb95b70db6
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QProcessEnvironment had operator==() and operator!=() defined as public
member functions, so use QT_CORE_REMOVED_SINCE and removed_api.cpp to
get rid of these methods and replace them with a hidden friend.
Use QT_TEST_ALL_EQUALITY_OPS macro in unit-tests.
Use new \compares command in the documentation to describe the
comparison operators provided by QProcessEnvironment.
Task-number: QTBUG-120303
Change-Id: I4c57f6cfb9589e82a37eea6993e079212b34cecd
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
It's the font with the highest priority in the engine, and allows us to
test variants by setting a variable axis.
Change-Id: I44bd3a63eef8d6cb999eaa372c29abbf445f401b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This tests allows configuring font loading options from
the test web page.
Change-Id: I15d850addb38329423722d1763ace8836dca2484
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
The code assumed that the rounding of a floating point value, and the
rounding of the sum of that value and an integer, would always snap in
the same direction. But because of accuracy limits (independently
of the rounding function employed), that is not always the case for
fractions very near to .5.
Fixes: QTBUG-122451
Pick-to: 6.7 6.6 6.5 6.2 5.15
Change-Id: I0825d42e6be7f6e3397760a5e9be5dddca42dcdc
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
A macro to mark tech preview APIs, in order to make header reviews
easier:
* newly introduced TP APIs are clearly marked as such;
* an API that leaves TP and becomes stable requires to change the
header, and not just the documentation (and therefore will again
appear in the header review).
The idea is to use this macro as if it were a C++ attribute.
It can't actually be an attribute, because we want to use it to tag
e.g. macro expansions (like Q_PROPERTY).
Change-Id: I05c5a91a4fa5bedfbd1c6146d4dc00e1d1d28628
Pick-to: 6.7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Now when QLatin1StringView implements relational operators with
QByteArrayView in terms of new comparison helper macros and helper
methods taking QByteArrayView, we can easily re-use these helper
methods to provide comparison with QByteArray and const char *.
QLatin1StringView already provided almost all of these operations,
partly as hidden friend functions, partly as inline methods.
Since the class is not exported, and the methods were inline, we
can just remove all of them and replace them with the comparison
helper macros.
This should speed up the relational operators, because they do not
construct string objects using QString::fromUtf8() anymore, but use
QUtf8StringView instead.
This also adds the previously missing QByteArray vs QLatin1StringView
relational operators.
Task-number: QTBUG-117661
Change-Id: I17a9185127ae130dab9409c6340a58f5d39f5a10
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by using the new comparison helper macors.
Note that by providing helper functions for QByteArrayView,
we can support all three types: QByteArray, QByteArrayView, and
const char *.
Use the regular QT_NO_CAST_FROM_ASCII and
QT_RESTRICTED_CAST_FROM_ASCII guards to disable the operators
if the cast from ASCII is forbidden.
Also use QT_ASCII_CAST_WARN on each operator.
This allows to enable related tests in tst_qstringapisymmetry.
Task-number: QTBUG-117661
Task-number: QTBUG-108805
Change-Id: I0d77c30245d8b5ac4b8cfd98d650c1885aca2005
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by using the new comparison helper macros.
Also, convert the existing QByteArrayView relational operators to use
these macros.
An attempt to define the helper functions comparesEqual() and
compareThreeWay() as hidden friends leads to compilation errors, because
the QByteArrayView(QLatin1StringView) constructor gets somehow disabled.
Apparently, it cannot satisfy the
QtPrivate::IsContainerCompatibleWithQByteArrayView trait anymore.
I could not find a reason for that, so I just defined the helper
functions as static inline private members of QByteArrayView. This fixes
the issue.
This allows to enable related tests in tst_qstringapisymmetry.
Task-number: QTBUG-108805
Change-Id: I35a69e99db8c61531ec726dab5b242b857f69e85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by using the new comparison helper macors.
This allows to enable related tests in tst_qstringapisymmetry.
Task-number: QTBUG-108805
Change-Id: I2cef8f4a25889b74a921fea47995d59c3a49d368
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by using the new comparison helper macros.
First the relational operators between QU8SV and QBAV where added,
and this resulted in the ambiguities when comparing QU8SV vs QBA.
So, the relational operators between QU8SV and QBA are also added
in the same commit. This, in turn, resulted in ambiguities when
comparing QU8SV and const char *, so add these relational operators
as well.
Use the regular QT_NO_CAST_FROM_ASCII and
QT_RESTRICTED_CAST_FROM_ASCII guards to disable the operators if
the cast from ASCII is forbidden. Also use QT_ASCII_CAST_WARN on
each operator.
This allows to enable related tests in tst_qstringapisymmetry.
Task-number: QTBUG-117661
Task-number: QTBUG-108805
Change-Id: If7919496fdf4519fd2a9398397a39210aadba077
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by using the new comparison helper macros.
The operators are marked as QT_ASCII_CAST_WARN, like the pre-existing
relational operators with QByteArray and const char *.
This allows to enable related tests in tst_qstringapisymmetry.
Task-number: QTBUG-117661
Task-number: QTBUG-108805
Change-Id: Ic9bcddffc25585edb7375c3e651d49d040a60454
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some of relational operators in Qt are marked with QT_ASCII_CAST_WARN
(see e.g. String, QLatin1StringView).
If we want to convert these operators to the new comparison helper
macros, we need a way to preserve this attribute.
My tests show that simply adding the attribute to the helper
comparesEqual() and compareThreeWay() functions does not work, so we
need to explicitly add it to each of the generated operators.
Change-Id: I2940a70fe191326e8a2ebfb05b8da6e0f21a845c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
... by using the new comparison helper macros.
This allows to remove dummy comparison operators from
tst_qstringapisymmetry.
This is also a pre-requisite for a follow-up commit that introduces
relational operators between QLatin1StringView and QByteArrayView.
Task-number: QTBUG-117661
Task-number: QTBUG-108805
Change-Id: I5837b457a777fddff1071bc252982e68d004fa94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously the test consisted of just one cpp file. An attempt to add
more test cases to the file resulted in the minGW compiler complaining
about a too large object file:
Fatal error: tst_qcomparehelpers.cpp.obj: file too big
This patch splits the implementation into a header and a cpp file.
This itself does not fix the issues, but now we can add the new test
cases in a separate cpp file. This patch also adds some comments
that advocate doing so.
Pick-to: 6.7
Change-Id: I451987370fa4e18b7ad81dfc064ea016f1d0da47
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Creating a QList of a given size, or resizing it to a given size, will
always value-initialize its elements. This commit adds support for
uninitialized construction and resizes. The intended use case is using a
QList as storage-to-be-overwritten:
QList<int> list(size, Qt::Uninitialized);
fillWithData(list.data(), list.size);
How do we define "uninitialized":
1) if T is constructible using Qt::Uninitialized, use that;
2) otherwise, default-construct T.
In detail:
1) covers (Qt-ish) datatypes that have a default constructor that
initializes them, but also a dedicated constructor that doesn't
initialize (e.g. QPoint, QQuaternion, ...).
2) covers everything else. Default initialization of scalars and
trivially constructible datatypes will leave them uninitialized.
A type which isn't trivially constructible will still get its default
constructor called (and possibly actually gets initialized); we can't
really do better than that, as we still have to construct objects and
start their lifetimes.
[ChangeLog][QtCore][QList] Added support for uninitialized construction
and resizing.
Change-Id: I32c285c7dddbf7e01475943f24e14e824bb13090
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This gives users of the class easy access to the Prealloc template
argument, without having to write a pattern-matcher like
template <typename T>
constexpr qsizetype preallocated_size_v;
template <typename T, qsizetype N>
constexpr qsizetype preallocated_size_v<QVarLengthArray<T,N>> = N;
first.
[ChangeLog][QtCore][QVarLengthArray] Added PreallocatedSize nested
constant, equal to the Prealloc template argument.
Change-Id: I928eaa5e62967445cdd7b0c2759567483fdb8997
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Blacklisting items on the baseline server would avoid any mismatch
failures for such items. However, they would still be rendered. That
is undesirable if the rendering itself has unwanted side effects for
such items, e.g. crashing the test executable.
Fix by adding new functionality in the baseline testing framework to
allow checking blacklisting status ahead of time, and add a new macro
QBASELINE_SKIP_IF_BLACKLISTED to do just that.
Add usage of that macro to the QPainter baseline test.
Pick-to: 6.7 6.5 6.2
Change-Id: I35f6df8cff2c6cb985c25ab5470cd42b53d44940
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The test is a bit silly, it was originally written to make sure that
we produce meaningful errors when trying to connect to a proxy server
where the connection is refused or the server doesn't respond at all.
To test that, it creates a local QTcpServer and starts listening to any
free port (by specifying port 0) and then it closed the server and
uses the address-port of localhost:serverPort as the proxy to use, since
we know it _was_ unused, since we were able to bind to it.
However, just calling close() doesn't immediately tear down the internal
socket descriptor, so the OS may still have the port reserved for
some time.
By moving the QTcpServer to a narrower scope we will quickly destroy it
and the internal socket engine, which is parented to the server, and
this in turn releases the socket descriptor.
Pick-to: 6.7 6.6 6.5
Change-Id: If12128fc21d1f545df152f08f0d52c1b14ac6037
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Replace QTestPrivate::testEqualityOperators() helper function with
QT_TEST_EQUALITY_OPS macro to get a reasonable debug output in case of
failure.
Task-number: QTBUG-120303
Change-Id: I1ca23cabfe62ab78e012cf95fd2add631fc88a64
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
In icon mode, the name of the icon gets truncated.
Pick-to: 6.7
Change-Id: I8e2081a68006907ae916c8e8fa1aeb6006acbc6d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We have explicit QFont properties, and QTextFormat::setProperty().
Setting FontFixedPitch doesn't necessarily affect the view (QTextEdit or
Qt Quick Text/TextEdit); and setting the font to the one we get from
QFontDatabase::systemFont(QFontDatabase::FixedFont) is also unreliable,
because the "monospace" fallback might actually be proportional.
QTextMarkdownWriter checks for both to decide whether to use backticks;
so markdown writing works if an editor UI makes the format monospace
both ways to be safe. But in the opposite case that the main font is
actually a monospace font, it's always been broken.
The rest of the QTextCharFormat properties are generally working, to
the extent that they are applicable to Markdown. But we lacked explicit
test coverage: so far we were just reading Markdown or HTML and writing
Markdown to test the writer.
Also amend an old comment about writing underlines: writing was always
possible, and since f5c7799f59 reading is
supported too. So the underline support is symmetric (except that we
don't heed the QTextDocument::MarkdownFeatures argument to the writer
ctor: we probably should do that some day).
Pick-to: 6.7
Task-number: QTBUG-54623
Task-number: QTBUG-75648
Task-number: QTBUG-75649
Task-number: QTBUG-79900
Task-number: QTBUG-99676
Task-number: QTBUG-103484
Change-Id: Iacb4ed0ea59030570702d4eadfdadfad872065c6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QFileInfo had operator==() and operator!=() defined as public member
functions, so use QT_CORE_REMOVED_SINCE and removed_api.cpp to get
rid of these methods and replace them with a hidden friend.
Use QT_TEST_ALL_EQUALITY_OPS macro in unit-tests.
Task-number: QTBUG-120303
Change-Id: Ie290df230b0f608a0965dccba9184382291cad8e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
We were handling QEvent::WindowChangeInternal, but based on what the
code is doing, what the comments say, and what QQuickWidget does,
the right event should be WindowAboutToChangeInternal.
This fixes a crash when reparenting a QRhiWidget into another widget,
where we could call removeCleanupCallback() on an RHI that was already
gone.
The fact that we have a stale RHI pointer at WindowChangeInternal time
is still problematic, and caused by our call to addCleanupCallback not
happening as it should for the first call to ensureRhi(), but this will
be fixed in a follow up.
Pick-to: 6.7
Change-Id: I054120e97a24a1f74af44b2d251470792f03f7f3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The only backend that requires longer wait times is
QPollingFileSystemWatcherEngine; lower the interval of the polling
engine for the unittests (using the same objectName() trick that is used
to force using a specific watcher engine).
Remove the comment about FAT32 filesystems, there is no where on the CI
where this test fails so far.
Before:
Totals: 23 passed, 0 failed, 0 skipped, 0 blacklisted, 127027ms
After:
Totals: 23 passed, 0 failed, 0 skipped, 0 blacklisted, 666ms
Change-Id: I96378f810463fa5c4ebdc13946ea23810e80f144
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
According to QUIP-18 [1], all test files should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: I701e707447ca68977bdd80662200eb0c36545dbe
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If it wraps, the text on the next line is no longer part of the heading.
Fixes: QTBUG-106526
Change-Id: I8015c948d875c6944422ef3439e3128af5b2a2e2
Pick-to: 6.5 6.6 6.7
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
If we need to word-wrap a paragraph after a long formatted span,
write any ending markers before the newline (amends
280d679c55 ).
Break before a fragment if the whole thing is past the column limit;
in that case, write out any ending format markers before the newline.
And now we have test coverage: prepend characters one-at-a-time to a
line that already has a two-word formatted span at the end, and watch
it successively break after the span, in the middle, and then before,
while never putting a newline before the ending markers or failing to
write them.
Fixes: QTBUG-116927
Change-Id: I140e10d19a491cb599bf7ecf8514af866b5383f3
Pick-to: 6.5 6.6 6.7
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
But we do not yet handle a blockquote in a list item. Presumably
that's less common anyway.
We now also continue block-quote prefixes onto blank lines
within a block quote, which looks more normal.
Pick-to: 6.7
Task-number: QTBUG-104997
Change-Id: I2b5642cf3a0c81a94444a33f026a02ad53e7e6bb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Work-around SiC change made to qfloat16 when using native floats.
Pick-to: 6.7 6.6 6.5
Change-Id: I981505e6eff7277ad14512b56fad334be6e79016
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDir had operator==() and operator!=() defined as public member
functions, so use QT_CORE_REMOVED_SINCE and removed_api.cpp to get
rid of these methods and replace them with a hidden friend.
Use QTestPrivate::testEqualityOperators() helper function in unit-tests.
Task-number: QTBUG-120303
Change-Id: I86c2ba18b8b114efd9f62fc2fd628bc9065b04b2
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
We already had the machinery to copy one buffer to another, so this
machinery has been generalized a bit, so we can use it to preserve
the static content during buffer resize.
As explained in the comments, we need to do the buffer copies during
buffer creation, instead of relying on our back buffer finalization,
as we are not guaranteed that we can always copy the static content
from the front buffer.
Pick-to: 6.7
Change-Id: Ia9b3ac6ec982949990d172b0b14f35b13bbae92a
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
This was a feature in Qt 4, but the only platform that carried it over
to Qt 5 was Windows, in ab76593f18, and
that's still the situation.
As a first step in possibly implementing this on more platforms, lets
replace the hard-coded check in QWidgetRepaintManager::hasStaticContents
with a proper QPlatformIntegration capability check in the only call site.
Pick-to: 6.7
Change-Id: I2067109f45116cd8c62facf7224cd748f19e845b
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QWidgetPrivate::setGeometry_sys wrongly triggers full update, which is
why the test was QEXPECT_FAIL, even on Windows, which does implement
static contents.
We can test the behavior without involving the broken QWidget behavior
by resizing the QWindow instead, which triggers a resize of the platform
window and will be fed back through QWSI, similar to when the user
resizes the window via the window frame.
The QEXPECT_FAIL message for the QWidget resize has been updated to
reflect why it's expected to fail.
tst_QWidget::optimizedResize_topLevel() has similar issues to this
test, and solves it by using Window specific platform code. For now
this test has been left alone, as there are a lot more going on in
that test in terms of workarounds and blacklistings, so it needs
further investigations.
Pick-to: 6.7
Change-Id: I28a55c0723b3e7f16b362d1ebc369e038d5a7ac4
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The plumbing from QBackingStore::resize to the platform backing store
was missing a high-DPI conversion for the backing store's static
contents, which is also expressed in the QtGui coordinate system.
Pick-to: 6.7 6.6 6.5 6.2
Change-Id: Ifaac916cbf184b9386aa5feca1577a53bf2906ed
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
I didn't do it in a template because the 32-bit code requires a
compatibility hack for Qt 6 and it's using an XOR of the high and low
parts.
Fixes: QTBUG-116080
Change-Id: I5dd50a1a7ca5424d9e7afffd17ae0ba5b9ff52f6
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
If we add the typedefs, we also need to add the qHash() overloads. See
code comments for the explanation of how it works. I chose to use an
addition to merge the upper and lower parts because of the comment in
QHashCombineCommutative's operator(), introduced by commit
91b44afdcb.
Found in 6.6 API-review, but didn't make the cut and then was
forgotten.
Drive-by fix long line nearby.
[ChangeLog][QtCore] Added qHash() overloads for quint128 and qint128.
Fixes: QTBUG-116054
Task-number: QTBUG-116080
Change-Id: If484aed08ba476e0eace800b719f435203100f3e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
So we can test more values. Because we are testing more values, we can't
use QEXPECT_FAIL, because we can't guarantee a mismatch.
Pick-to: 6.7
Task-number: QTBUG-116077
Task-number: QTBUG-116080
Change-Id: I664b9f014ffc48cbb49bfffd17b021719e6d612f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QObject::startTimer() returns 0 in case of failure, for example when
someone tries to register a timer with a negative interval.
However, QTimer internally uses -1 as an invalid timer id.
This could lead to a situation when the timer was not really started,
but QTimer::isActive() returned true.
This patch fixes it in two ways:
- check the return value of QObject::startTimer() and treat 0 as an
error.
- do not treat 0 as a valid timer id when calculating the active state.
As a drive-by: move the `using namespace std::chrono_literals;`
declaration to the top of tst_qtimer.cpp, so that we do not need to
repeat it in each test case.
Fixes: QTBUG-122087
Pick-to: 6.7 6.6 6.5
Change-Id: I0e21152b2173ebb5fb0dada1b99a903a321ca9c4
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
The scroll bars may show up in one of the grabs and not the other,
(as seen on macOS), which is interesting, and possibly a bug, but
is not what the test is checking for, so let's disable the scrollbars
to stabilize the test.
Pick-to: 6.7
Change-Id: Iad97ca5b22783bb1bee51b560957c5461b7d9923
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In ccd3bf0871 we introduced code that would
ensure that our call to QWidgetPrivate::setVisible() from QWidgetWindow
would not result in WA_WState_Hidden being set. This code was later
modified in 51300566ff to apply to
widgets that were explicitly shown/hidden.
Unfortunately, the reset of the Hidden and ExplicitShowHide attributes
would in some cases result in the widget having only ExplicitShowHide
after being hidden, which is an invalid state.
It also resulted in the widget having both Visible, Hidden, and
ExplicitShowHide, if first being hidden via QWidget, and then
shown via QWindow, which in turn prevented the widget from being
hidden via QWidget::hide().
As we no longer rely on the adjustments to Hidden/ExplicitShowHide
to fix QTBUG-73021, we can remove the entire logic. Any setVisible
call to QWidgetWindow will either come from outside, in which case
we should respect that and set Visible/Hidden via QWidgetPrivate,
or the setVisible call is a result of QWidget itself (or its parent)
showing the QWidgetWindow, in which case the QWidget visible state
is already up to date and we skip the QWidgetPrivate::setVisible
call.
Task-number: QTBUG-121398
Task-number: QTBUG-73021
Fixes: QTBUG-120316
Pick-to: 6.7
Change-Id: I3174ad66b7e10c55aa99b7cb433267632169ca8f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Frédéric Lefebvre
Thiago Macieira
Edward Welbourne
Doris Verria
Even Oscar Andersen
Mårten Nordheim
Ahmad Samir
Allan Sandfeld Jensen
Tor Arne Vestbø
MohammadHossein Qanbari
Shawn Rutledge
Fabian Kosmale
Tatiana Borisova
Marc Mutz
Eskil Abrahamsen Blomfeldt
Santhosh Kumar
Eirik Aavitsland
Volker Hilsheimer
Milla Pohjanheimo
Morten Sørvig
Laszlo Agocs
Giuseppe D'Angelo
Ivan Solovev
Assam Boudjelthia
Jan Arve Sæther
Axel Spoerl
Lauri Pohjanheimo
Sune Vuorela
Sergio Martins
Friedemann Kleint
Liang Qi
Piotr Wierciński
Mitch Curtis
Miguel Costa
Vladimir Belyavsky
Joerg Bornemann
Mate Barany
David Faure
Isak Fyksen
Ulf Hermann
Paul Olav Tvete
Jarek Kobus
Alexandru Croitor
Alexey Edelev
Christian Ehrlicher
Juha Vuolle
Lucie Gérard
Rym Bouabid
Matthias Rauter
Wladimir Leuschner
Yansheng Zhu
Kai Köhne
Viktor Arvidsson
Tinja Paavoseppä
Jonas Karlsson
Chris Lerner
hjk