It's not needed, but makes the point for having a mutable lambda in the
first place.
Change-Id: I483862d6aee90bb62d4b5363c56a80bb05e14df7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This places the first through third parameters on the exact positions
that they will be used to perform the operations in the switch, saving
the compiler from generating a few instructions to move data around. All
ABIs Qt supports that pass any function parameters in registers at all
pass at least 4.
We keep the return type as void (instead of returning bool, for the
Compare case) so the compiler can apply tail-call optimizations for
those two typical cases.
PMF case: https://gcc.godbolt.org/z/9oP5boKfj
Function case: https://gcc.godbolt.org/z/e9vEzd5dj
Functor case: https://gcc.godbolt.org/z/s8Ejjra7P
Change-Id: I3e3bfef633af4130a03afffd175d3e3009c56323
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Amends 3bf5b5f894, after which free
functions and std::bind could no longer be used as callables in
QMetaMethod::invokeMethod.
For free functions to work we need to decay to function pointers when
choosing what type QtPrivate::Callable aliases.
And std::bind has operator() overloads and the return type cannot be
deduced. So simplify the definition of the ZeroArgFunctor - we know
the function prototype if we know the return type.
Add testcase for calling std::bind and free function, and remove the
now unneeded helpers for functor argument and return type deduction.
Change-Id: I54aac5cb6d660267e6b2f5ab05d583e8826cdf9a
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The QWeakPointer conversion SMFs cannot actually be used for QObject
payloads, as, for unknown reasons (some comment about vtable this
author doesn't understand), conversion goes through QSharedPointer,
the creation of which throws the checkQObjectShared() warning and
yields a nullptr.
We need to continue to use the QWeakPointer(T*, bool) constructor the
QPointer(T*) ctor also uses.
It's high time we dissociated QPointer from QWeakPointer...
Amends 5f28d367d9.
Fixes: QTBUG-112464
Change-Id: I2f93843af3daf02323d77a4259eaa3745d8de3a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have quite a few Qt API that assumes this, so making this change
helps transitioning them to QDeadlineTimer.
[ChangeLog][Important Behavior Changes] QDeadlineTimer will now
interpret negative millisecond remaining times as "forever", instead of
only the value -1. This brings the API closer in line with other API
like QMutex. This change does not apply to the nanosecond counts in the
API, nor to the API based on std::chrono.
Change-Id: I6f518d59e63249ddbf43fffd175a3e5bead564ae
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Commit b498e1ae3a removed the last
distinction. And since there was no distinction, the code that was
previously under a conditional for CoarseTimer must work for precise
too.
Change-Id: I6f518d59e63249ddbf43fffd175a3eddbd41611a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
After the recent changes we only have a single implementation of
QSlotObjectBase, which can handle free functions, member functions,
functors, and lambdas. Rename it to callable, and explicitly hide
the static implementation function so that it doesn't become a symbol
of static libraries using Qt.
Also rename makeSlotObject to makeCallableObject, and polish coding
style and comments in the qobjectdefs_impl header a bit.
Change-Id: Id19107cedfe9c624f807cd8089beb80e9eb99f50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QDebug] Added pretty formatting of C++ <chrono>
durations.
[ChangeLog][QtTest] Added pretty formatting of C++ <chrono> durations
for QCOMPARE expressions.
Change-Id: I3b169860d8bd41e9be6bfffd1757cc087ba957fa
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add helper that allows us to determine the argument list and return type
of a functor. This triggers a compile time error if the functor has
operator()() overloads (we only support zero-argument call operators, but
there might be const/noexcept variations). Use that helper to declare a
ZeroArgFunctor type which also declares a ReturnType and Arguments alias.
Add a Callable alias that now combines FunctionPointer and ZeroArgFunctor
into a single type that we can then use to merge the specializations of
QMetaObject::invokeMethod.
[ChangeLog][Potentially source-incompatible changes] Using a functor
with several operator() overloads in QMetaObject::invokeMethod now causes
a compile time error. Qt would previously ignore const and noexcept
overloads and always call the mutable version on a copy of the functor.
Change-Id: I3eb62c1128014b729575540deab615469290daeb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Amends 642f799fc6 to avoid unnecessary
copies in between the calls to the QFunctorSlotObject construcotr. We
can't use a univeral reference in the QFunctorSlotObject constructor
as the call is not deduced. So provide two overloads for lvalue and
rvalue references instead.
The compile check in the test now no longer fails as we delay the
storage until one level later, but that's acceptable.
Change-Id: Ide95b4a73c70f6f47698dd1e95138aa5d48ee95d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove duplicate test and outdated comment about move-only functors,
and include return value in move-only functor test.
Change-Id: I58dffe0ccf3ec12e7e05e2c9588303da4a7e75ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amend 3c6e9dcc623c9d7281a81174bb3a696e030f30a7 by making sure that
we explicitly move move-only functors into the slot object in the
respective tests, and that failing to do so doesn't compile.
Also add test coverage for mutable lambdas, which work as they do
with connected functors: the connection stores a copy, and calls
don't modify the original functor.
Change-Id: I637e6f407133e2f8f72109b3fe5369a11d19da93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This reverts commit 9958edba41, which
incorrectly tested a move-only functor without actually moving the
functor.
Change-Id: I3707f9f8e5055102f7edfb3e1cb9750978356dd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWeakPointer can do the same, so there's no reason to not allow it for
QPointer.
[ChangeLog][QtCore][QPointer] QPointer<T> can now be (move- and
copy-)constructed from QPointer<X>.
Fixes: QTBUG-112464
Change-Id: I77cf5d39974bf2b3ec849b4afc33e286e864821e
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
In Qt >= 6.1, < 6.5, a trivially constructible type would have the
NeedsDestruction flag set, but it's dtor pointer would have been null.
In Qt 6.5, the meaning of the NeedsDestruction flag was changed to be
more aligned with what the name suggests, and thus would only be set for
non-trivially destructible types. For QMetaType this was fine, but
QVariant has a check for acceptable metatypes which attempts to verify
whether a QMetaType is usable for QVariant. The check assumes the
semantics of Qt 6.5, and thus fails for metatypes created by older Qt
versions.
To fix this issue, we increment the QMetaType revision field, and only
check the metatype's destruction support if the revision is high enough.
In theory, that allows passing unsuitable metatypes from older Qt
versions to QVariant; however, such code would have been broken in prior
Qt releases already (which didn't attempt the check), and no code that
used to work in any released Qt version will break (as we simply skip a
check that was passing before).
Fixes: QTBUG-113227
Pick-to: 6.5
Change-Id: I12e02bd97d2c410ea1a36efb0ce2389f21d50a30
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Amends 207aae5560 to make it easy to
create human-friendly error messages. Since the functor-accepting member
functions are not removed from the API, the first compile error will be
that there is no suitable overload of the makeSlotObject helper, which.
With the assert helper, the first error message is easier to understand.
Change-Id: I4878ec35a44ddfa5dc9d9e358d81c3fd40389c0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move-only functors must never be passed by value, so fix the
QFunctorSlotObject constructor accordingly.
This then requires adjustments to the various QMetaMethod::invokeMethod
overloads, as those must also perfectly forwad the functor type.
Enable the previously failing test case for move-only functors.
Change-Id: I9c544fd3ddbc5e1da3ca193236291a9f83d86211
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amend 207aae5560, as code checker
complained that we std::move'd a potential lvalue. This warning was
valid if the public API did not accept the functor parameter by value.
Fix this by consistently std::forward'ing the parameters through the
call stack, and add a compile-time test. Writing that test revealed that
the helper API didn't work with free functions, so fix that as well. It
also revealed that QFunctorSlotObject couldn't work with a const
functor, which is also fixed by this change.
We cannot support move-only functors with that change, as it requires
a change to QFunctorSlotObject that breaks the QMetaObject test.
Change-Id: Iafd747baf4cb0213ecedb391ed46b4595388182b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This avoids constructing an object just to copy (later: move) it into a
QVariant.
ChangeLog will be in a follow-up change adding emplace support.
Task-number: QTBUG-112187
Change-Id: I444e580c7d8927d41b3d21d5a521e7c475119e4c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Functions in Qt that take a callback need to support callables with or
without context objects, and member functions of an object. The
implementation of those overloads follows a pattern that ultimately
results in a QSlotObjectBase implementation being created and
passed to an implementation helper that takes care of the logic.
Factor that common pattern into a new helper template in QtPrivate
that returns a suitable QSlotObjectBase after checking that the
functor is compatible with the specified argument types.
Use that new helper template in the implementation of
QCoreApplication::requestPermission and QHostInfo::lookupHost.
The only disadvantage of centralizing this logic is that we cannot print
a more detailed error message indicating which argument types the
caller expects. However, that information is visible from the detailed
compiler errors anyway.
Change-Id: I24cf0b2442217857b96ffc4d2d6c997c4fae34e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The expected states are:
- nothing sets theMainThread before main()
- theMainThread is reset when the last QObject (the QCoreApplication in
the test) is destroyed
The GUI version of this test appears to leak a lot of QObjects. By the
time this function runs, theMainThread's QThreadData still has a
refcount of 66 on Linux/XCB. The Windows non-GUI version also
failed. Neither situation was investigated to see why objects are
getting leaked.
Pick-to: 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd17507d9e6ef08743
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amend 4d90c4e74a by clarifying why
moving the QSingleShotObject to the receiver's thread is a good
idea. Move that logic into a separate function and use that also
for the string-based connection.
Optimize the implementation by delaying the timer creation until
after we have moved the QSingleShotTimer object to the target
thread, using a queued metacall if needed to create the timer.
This avoids the creation of the timer in the wrong thread and
then the recreation of the timer in the new thread when QObject
handles QEvent::ThreadChange.
To avoid that the timer is created when it has already expired in
real time, use a deadline timer and fire timeout immediately when
it has expired by the time we get the metacall.
Since the timerId might now not be initialized in the constructor,
initialize it to -1.
Augment the crossThreadSingleShotToFunctor test function by
deliberately not starting the thread until the deadline expired.
[ChangeLog][Core][QTimer] Single-shot timers with a string-based
connection are now started in the receiver's thread, not in the
thread that creates the timer.
Task-number: QTBUG-112162
Change-Id: I3fc94c34c21d9f644da41a2e4c2da479980b8580
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This removes all uses of QDeadlineTimer::t2 member in the .cpp (so it
gets marked [[maybe_unused]]) and greatly simplifies the code.
Change-Id: Ieec322d73c1e40ad95c8fffd17465bd50c1113ea
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
You can't partially specialize a template function, so these
specializations for steady_clock only worked if the Duration parameter
was nanoseconds. This could have been solved with function overloads
instead, but I find the if constexpr code simpler to read.
Pick-to: 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17468bd73fc2fe24
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This matches the work that was done for QElapsedTimer. The
QDeadlineTimer::t2 member is now always 0.
This also removes the last distinction of timer types. Originally I had
intended to use CLOCK_MONOTONIC_COARSE on Linux[1], but that created
more problems than was worth, so I abandoned the idea in 2016.
[1] https://codereview.qt-project.org/c/qt/qtbase/+/159933
Change-Id: Ieec322d73c1e40ad95c8fffd17468b313798ef79
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
This commit deletes the direct, low-level functionality that
QElapsedTimer has carried since it was introduced. Everything now uses
only std::chrono::steady_clock and std::chrono::nanoseconds.
QDeadlineTimer temporarily still uses qt_gettime(), which is moved to
qcore_unix.cpp.
Task-number: QTBUG-110059
Change-Id: Ieec322d73c1e40ad95c8fffd174641a469b1eee5
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoid capturing the same property multiple times in a binding by
storing them in the BindingEvaluationState. We store them in a
QVarLengthArray array, as the number of properties involved in a binding
is expected to be rather low, so a linear scan is fine.
Avoiding double capture is a good idea in general, as we would otherwise
needlessly reevaluate bindings multiple times, and also needlessly
allocate memory for further observers, instead of using a binding's
inline observer array.
Even more importantantly, our notification code makes assumptions that
notify will visit bindings only exactly once. Not upholding that
invariant leads to memory corruption and subsequent crashes, as
observers allocated by the binding would get freed, even though we would
still access them later.
Fixes: QTBUG-112822
Pick-to: 6.5 6.2
Change-Id: Icdc1f43fe554df6fa69e881872b2c429d5fa0bbc
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
When a context object is provided, then callers expect that the functor
or slot is executed in the thread of the context object. And if the
context object has been destroyed by the time the permission response
is received, the functor shouldn't be called at all.
To implement this, we either have to plumb the call back through a
signal/slot connection and benefit from QObject's infrastructure. This
is not practical here, as we don't have an "engine QObject" that would
emit a signal.
Instead, we can create a QMetaCallEvent explicitly, following what we do
in e.g. QHostInfo, and using a temporary QObject that handles the event
to then call the functor.
Add test coverage.
Pick-to: 6.5
Change-Id: Id878e45b304857304165ab4a7c6aae76fbee46ce
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This will be helpful in a number of places, in particular in order to
support enums of different sizes in QML. We record the type as string in
the JSON output and as QMetaTypeInterface in the generated C++.
Task-number: QTBUG-112180
Change-Id: I943fac67f8b25b013d3860301416cdd293c0c69e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Amends 4d90c4e74a, after which the test
became flaky. We need to wait for the functor to be called before
quitting the thread, otherwise we have no guarnatee that any of the
queued metacall events have been processed by the thread. Since
QThread::quit is thread-safe, we can just call it from within the
functor. This guarantees that at least one of the single-shot timers
is processed before we quit.
And since QTimer::singleShot has special code paths for 0-ms timers
(going through an explicitly queued QMetaObject::invokeMethod call
rather than through an actual QSingleShotTimer object), we need to run
the test logic with different timeouts to cover both code paths.
Task-number: QTBUG-112162
Pick-to: 6.5 6.2 5.15
Change-Id: Ide1e7b4b74dcbda72144a0d73ef5f64b0694ddbc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently, Qt assumes that enums always have int as their underlying
type (both in QMetaEnum::keyToValue and in the QML engine). This change
makes it possible to to retrieve the underlying type from an enum's
metaype - or rather, a metatype of an integral type with the same size
and signedness. The use cases aobve don't really rely on the exact same
type. In most cases, we wouldn't even need the signedness, however that
is already available anyway, and it will come in handy once QML supports
bigint, and we need to decide whether we should return
While it would be possible for individual users of this function to
manually query the size and signedness, having a function returning a
metatype offers additional convenience - especially in QML, where the
conversion APIs generally operate on metatypes.
Task-number: QTBUG-27451
Task-number: QTBUG-84055
Task-number: QTBUG-112180
Change-Id: Icf733b42df0ea64017d69f4d94cb7c855d9e3201
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A null QString used to make a QVariant containing it null in Qt 5, but
this is no longer the case. Add a test that get_if works as expected.
Task-number: QTBUG-111598
Change-Id: I0f3511e1b33f4a9d67755269455680feda22ddca
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This second patch of the series implements get().
Unlike other get() implementations in Qt, don't use my trick with the
constrained friend free function here. Instead, provide the four
overloads manually, like mandated by the standard library for
std::variant (and, indeed, tuple), such that these functions can also
be used on subclasses of QVariant.
[ChangeLog][QtCore][QVariant] Implemented the type-based std::variant
access protocol (get<T>()/get_if<T>()) to allow easier access to the
contained element than the previous solution of casting data(), as
well as to allow generic code to treat QVariant and std::variant the
same. The holds_alternative<T>() function is not provided, since it's
the same as get_if<T> != nullptr. The index-based variant access
functions (get<I>()/get_if<I>()) are also not provided, because,
unlike std::variant, QVariant does not have a bounded number of
alternative types, and QMetaType IDs are not (all) compile-time
constants.
Fixes: QTBUG-111598
Change-Id: Id7bc41f7d91761b3483ec5604f1a4685c8079844
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QVariant supports non-default-constructible payloads, in principle
(QTBUG-105140). And fromValue() works with such types, but value()
insists on providing a wide contract and therefore accidentally
requires default-constructible.
We can now invent other "Qt-ish" API like optional::value_or() or a
value() that returns optional<T>, but we should first get the
interface in that generic code must use, and which at the same time is
the most versatile, because it gives write access to the element
stored in the variant: [variant.get], consisting of get_if(), get(),
and holds_alternative(). The latter is the same as get_if() !=
nullptr, so we won't provide it.
This first patch implements get_if(), adds test for it.
As a Hidden Friend supposed to be called with explicit template
arguments, we run into the problem that wg21.link/P0846 solved for
C++20. Add the usual work-around, and check it works.
The ChangeLog will be on the last patch.
Task-number: QTBUG-111598
Change-Id: I23f57ea2de3946944810c5552c68a7a3060a44f2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I must have broken this in the 6.5 work I did for QMetaType and
QVariant, but I haven't searched which commit exactly did it. Our
QVariant tests are old and thus only checked the type ID, which meant
that they caused the registration by the act of asking for the ID in the
first place; this commit adds a couple of explicit checks for the type
registered by name before the ID.
Fixes: QTBUG-112205
Pick-to: 6.5 6.5.0
Change-Id: Idd5e1bb52be047d7b4fffffd174f1b14d90fd7a3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
For single-shot timers, at least. QSingleShotTimer had either an
optimization or the only way to make new-style slot invocations by
storing the QSlotObject pointer and calling it directly. Instead of
doing that, let's just actually connect and let QObject handle the
actual delivery.
[ChangeLog][QtCore][QTimer] Fixed a bug that caused slots connected to
single-slot timers using the new-style connection mechanism to be
delivered in the wrong thread.
Fixes: QTBUG-112162
Pick-to: 5.15 6.2 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd174eadb227ab65ee
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
All the other overloads are implemented using the new one.
Windows change relies on the pre-check in the code review making sure it
compiles.
[ChangeLog][QtCore][QThread] Added sleep(std::chrono::nanoseconds)
overload.
Task-number: QTBUG-110059
Change-Id: I9a4f4bf09041788ec9275093b6b8d0386521e286
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
250ca8d5f8 changed the qConvertToNumber
to have a std::optional return instead of a boolean out-argument.
In doing so a code path that was supposed to report a failure (string
could not be converted to an integer) accidentally starting reporting
success (and converting the string to 0).
The problem is that the `ok` check from QString::toLongLong was
accidentally dropped in the refactoring; previously the function set
`ok` to false and returned 0, now the function just returns 0.
Instead, amend that return to return nullopt (because the conversion has
failed).
Change-Id: Iaedef5463f3ec500a97bd4c9bbddf977f66df61a
Pick-to: 6.5 6.5.0
Fixes: QTBUG-111867
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
In most QObjectPrivate-subclasses, the Q_DECLARE_PUBLIC macro is used in
the private segment of the class declaration. In that case, the q_ptr
becomes a private member of the private class, and then the
QObjectPrivate::connect function can no longer be used, as it needs to
access the d_ptr.
Fix this by declaring QObjectPrivate, and the static-assert-helper, as
friends of the class using the Q_DECLARE_PUBLIC macro.
Adapt the QObject test by moving the Q_DECLARE_PUBLIC macro into
the private section of the test-private, and add a compile test.
Pick-to: 6.5 6.5.0
Change-Id: Ifc04be3b305221e138b1e08bb3a3838d871f4fcb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QPropertyAlias might be deprecated, but using it should still not fail
to compile.
Pick-to: 6.5
Fixes: QTBUG-111735
Change-Id: I486cddb424b60cd3e5c539e26afca3726e29bb09
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Both QTimer's and QObjectPrivate's destructors print a warning if the
current object lives on another thread and has an active timer:
QWARN : tst_QTimer::moveToThread() QObject::killTimer: Timers cannot be stopped from another thread
QWARN : tst_QTimer::moveToThread() QObject::~QObject: Timers cannot be stopped from another thread
This timer is used to ask the thread to quit, which in turn allows us to
destroy this QObject without a cross-thread warning. Because it's
already fired once and done its duty, we can make sure it's not active
by simply making it single-shot.
Pick-to: 6.4 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17465067b27c044b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
We so far refetched the first observer after evaluating bindings, as
binding evaluating might change the list of observers.
However, that approach did not take into account that the 'this' pointer
might no longer be valid after binding evaluation: In case of a
QObjectBindableProperty (or a QObjectCompatProperty), binding evaluation
might cause a reallocation of the binding storage, and consequently the
invalidation of the QPropertyBindingData.
Fix this by refetching the QPropertyBindingData from the storage (if a
storage has been provided, which is always the case for the affected
classes).
Fixes: QTBUG-111268
Pick-to: 6.5 6.4 6.2
Change-Id: Ie7e143a0bbb18f1c3f88a81dd9b31e6af463584f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The code for the QMetaMethod queuedConnectionTypes overload relied on
QMetaMethod::parameterMetaType and QMetaType::flags() to detect whether
we're dealing with a pointer (and then use the VoidStar metatype instead).
However, if the type was incomplete when the slot was defined, and the
type was not registered when connect was called, we would not find a
metatype for the argument.
However, in that case we might still be able to handle the method, by
checking whether the type name of the arguments ends with a "*".
This patch does that, fixing a regression from 5.15.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-108537
Change-Id: I54cc48a3343444480ab9094fe1ebaaa5aa75cee0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A RAII wrapper around Qt::{begin,end}PropertyUpdateGroup().
[ChangeLog][QtCore][QScopedPropertyUpdateGroup] New RAII class
wrapping Qt::beginPropertyUpdateGroup() and
Qt::endPropertyUpdateGroup().
Fixes: QTBUG-110710
Change-Id: If2619e9584dd9d57985d63e3babca75421499ab9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
A QVariant(QString) was not convertible to an enum not registered with
Q_ENUM() which worked fine in Qt5.
The same problem exists for QVariant(enum) to QString.
Fix it by not bailing out when no metatype for the enum was found and
try to convert it to a qlonglong instead (which is then correctly
converted to the enum type).
Fixes: QTBUG-109744
Pick-to: 6.5 6.4
Change-Id: Ie7bb016a860455b69508f0f46b36474c9c294f3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes a use-after-free in QPropertyDelayedNotifications::notify.
Before this patch, evaluateBindings or a notify from a property index
might have caused the originalBindingData to become reallocated.
However, at that point, we've already restored the original bindingData
in evaluateBindings, so we won't track updates, and thus won't adjust
originalBindingStatus, which will then point to already freed data.
To remedy this, we no longer do the notification with data fetched from
originalBindingData, but instead use the information we have in the
proxyData.
We also need to enure that referenced bindings do not get deleted; for
that we keep the PendingBindingObserverList alive for the whole duration
of the endPropertyUpdateGroup.
As we now have the PendingBindingObserverList, we use it for the
notification logic, and only notify change handlers in
QPropertyDelayedNotifications::notify. That will allow a follow-up
cleanup of QPropertyObserverPointer::notify, and aligns the logic for
grouped updates with the logic for "nornal", non-grouped updates.
Amends f1b1773d0a.
Task-number: QTBUG-110899
Pick-to: 6.5 6.4 6.2
Change-Id: Iae826e620d9614b7df39d86d8a28c48c8a5c4881
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
That use case for the class never materialized, and it was actually
meant for internal use. However, we put it into the public header, so
we cannot remove it (and while undocumented, someone actually used it at
some point, compare e4d62651c2).
Mark it as deprecated instead so that it can be finally be removed in Qt
7.
Change-Id: I058c5831a44610121fbec6eaddebd8b33d4a16c9
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This addresses two different issues:
- Firstly, we were casting the resolved binding data pointer to
QPropertyProxyBindingData, instead of the d_ptr of
QPropertyBindingData. Fix this by introducing a helper function,
and consistently using it to access the proxy data.
- Secondly, we were not resetting the originalBindingData when the
pointed to object was destoyed. Fix that, too.
Pick-to: 6.5 6.4 6.2
Task-number: QTBUG-110899
Change-Id: I7691c9df5cc26e761f6b0e5f16d152f7f2183208
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The fact that read-access is always included makes a bool readWrite
property a little awkward to document and explain. An AccessMode enum
with values ReadOnly and ReadWrite is much easier, and will also lend
itself more easily as a constructor argument than a boolean.
Found in API review.
Pick-to: 6.5
Change-Id: I4f20dbe9f19c7bdb52248a6e544e36d731d5a2ee
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's not a lot of files, but it's actually more in the same dir than
mime/ does right now. I'm about to add two more files, though I'll also
merge a few more later.
Change-Id: Id8d5e3999fe94b03acc1fffd171bfe2ea36a35a7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
As discussed in API review, the default-constructed T() returned from
a mismatched data<T>() call is indistinguishable from a real T with
default state.
To make them distinguishable, return optional<T>. Call the new
function value<T>(), mimicking QVariant::value<T>(), and suggested in
API review, because data() is usually used to return raw pointers, not
values.
Remove the qWarning() on requestedType and actualType mismatch, as the
new function can be used in std::get_if/dynamic_cast-like if-then-else
chains, in which failure is part of the normal operation, and a
warning message misplaced:
if (auto loc = perm.value<QLocationPermission>())
~~~ use *loc ~~~
else if (auto con = perm.value<QContactsPermission>())
~~~ use *con ~~~
~~~ etc ~~~
Pick-to: 6.5
Change-Id: I799a58e930307323ebce8f9ac50a42455e9c017f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The new test:
- checks the properties of stateful Q<Typed>Permissions work
- ensures that piping a Q<Typed>Permission through QPermission
maintains state
- also ensures that assignment of a Q<Typed>Permission to a
QPermission works (via QPermission(Type) + move ctor)
Pick-to: 6.5
Change-Id: I340e49b1ecc665702ccab26d9050ca158b0e7885
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
To be extended as neeeded.
Pick-to: 6.5
Change-Id: I57d2f55f67de073fe3e4916b7ba655342cf661dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
If a type is trivially default constructible, QMetaType (and QVariant)
think that it can be built and value-initialized by zero-filling a
region of storage and then "blessing" that storage as an actual instance
of the type to build. This is done as an optimization.
This doesn't work for all trivially constructible types. For instance,
on the Itanium C++ ABI, pointers to data members are actually
value-initialized (= zero-initialized, = initialized to null) with the
value -1:
https://itanium-cxx-abi.github.io/cxx-abi/abi.html#data-member-pointers
This means that a type like
struct A { int A::*ptr; };
is trivially constructible, but its value initialization is not
equivalent to zero-filling its storage.
Since C++ does not offer a type trait we can use for the detection that
we want to do here, and since we have also decided that Q_PRIMITIVE_TYPE
isn't that trait (it just means trivially copyable / destructible), I'm
rolling out a custom type trait for the purpose.
This type trait is private for the moment being (there's no
Q_DECLARE_TYPEINFO for it), and limited to the subset of scalar types
that we know can be value-initialized by memset(0) into their storage
(basically, all of them, except for pointers to data members).
The fix tries to keep the pre-existing semantics of
`QMetaType::NeedsConstruction`. Before, the flag was set for types which
were not trivially default constructible. That included types that
aren't default constructible, or types that cannot do so trivially.
I've left that meaning unchanged, and simply amended the "trivial" part
with the custom trait. A fix there (to clarify the semantics) can be
done as a separate change.
Change-Id: Id8da6acb913df83fc87e5d37e2349a4628e72e91
Pick-to: 6.5
Fixes: QTBUG-109594
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
in our tests.
They are not needed anymore since
d20f4ae706 got merged and the
QT_ANDROID_PACKAGE_SOURCE_DIR property is read at generation time
rather than configure time.
This means the
qt_internal_add_test ->
qt_internal_add_executable ->
_qt_internal_android_executable_finalizer ->
qt_android_generate_deployment_settings
calls take care of generation the right value for the property even
with CMake 3.16.
Remove the direct qt_android_generate_deployment_settings calls,
in preparation for their deprecation in public api.
Pick-to: 6.5
Task-number: QTBUG-88506
Task-number: QTBUG-88840
Task-number: QTBUG-108508
Change-Id: Ief1d0f9f620bd37beeedde26dedb66f728fa4a6f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This saves (mostly in corelib/time/) some complications that used to
arise from needing different code-paths for different time-specs.
Task-number: QTBUG-108199
Change-Id: I5dbd09859fce7599f1ba761f8a0bfc4633d0bef9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Put core includes all in a common form, sort alphabetically.
Remove a stray blank line.
Change-Id: I211c6b407f5e49d907cb065521883567f1dd30f4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Implements an adaptor from the notification signal of a Q_PROPERTY to
QBindable. The Q_PROPERTY does not need to be BINDABLE, but can still
be bound or used in a binding.
[ChangeLog][Core][Q_PROPERTY] Q_PROPERTYs without BINDABLE can be wrapped in QBindable to make them usable in bindings
Change-Id: Id0ca5444b93a371ba8720a38f3607925d393d98a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
I've reserved the IDs for int128, uint128, bfloat16, and float128,
because the mask in qvariant.cpp's qIsNumericType() requires primitives
to be less than 64 to operate properly.
Added a QMetaType/QDataStream test to confirm it is indeed built-in.
Change-Id: I3d74c753055744deb8acfffd17247f7f57bada02
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Most of them were easy to change. The pair one was a bit of a stretch,
but still worked. I've removed the lines on QPair, since QPair is
std::pair in Qt 6.
Change-Id: I3d74c753055744deb8acfffd17246ec98c583d08
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
qIsNumericType does not return true for enum types, which meant we never
called numericCompare() or numericEquals() when one of the types was an
enum.
Task-number: QTBUG-108188
Change-Id: I3d74c753055744deb8acfffd172449c68af19367
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The code implementing the C++ rules of type promotion and conversion
was too pedantic. There's no need to follow the letter of the standard,
not when we can now assume that everything is two's complement (this was
true for all architectures we supported when I wrote this code in 2014,
but wasn't required by the standard).
So we can reduce this to fewer comparisons and fewer rules, using the
size of the type, not just the type ID.
Change-Id: I3d74c753055744deb8acfffd172446b02444c0c0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It seems the value name correction is not needed at all,
and we must not do such correction.
Amends commit 738e05a55a
Task-number: QTBUG-107794
Change-Id: I903a762aafab4b55275beb8438e6769285821567
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
To allow the user to customize the C++ code that QDoc sees, so as to be
able to work-around some limitations on QDoc itself, QDoc defines two
symbols: Q_QDOC and Q_CLANG_QDOC, both of which are "true" during an
entire execution of QDoc.
At a certain point in time, QDoc allowed the user the choice between a
custom C++ parser and a Clang based one.
The Q_QDOC symbol would always be defined while the Q_CLANG_QDOC symbol
would be defined only when the Clang based parser was chosen.
In more recent times, QDoc always uses a Clang based parser, such that
both Q_CLANG_QDOC and Q_QDOC are always defined, making them equivalent.
To avoid using different symbols, and the possible confusion and
fragmentation that derives from it, all usages of Q_CLANG_QDOC are now
replaced by the equivalent usages of Q_QDOC.
Change-Id: I5810abb9ad1016a4c5bbea99acd03381b8514b3f
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
I wrongly assumed we can't query a value with an empty name ""
during the previous refactor commit, however, in Windows registry,
an empty name for a value means the default value of a key, we can
read and write it through the "Default" name.
Remove the wrong assert to fix the crash when we are trying to query
a default value of a key.
Add a new test case to test this kind of scenarios.
Amends commit 40523b68c1
Fixes: QTBUG-107794
Change-Id: Idacbcb86df4435a8c1ca1c19121599390ae8f3d3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Various places were knowingly provoking warnings without telling QTest
to check for and suppress those warnings. Some others did check for
this warning, so let's consistently suppress the noise.
Change-Id: I71b9829680c7a513f4d8fbb3c57442875a6c2dc4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
It's not clear why this test repeats each test-case five times, but
give the duplicates distinct names, at least.
Change-Id: I4a098d90c3fe6f61842745c1d5f62047fe13a9b5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were simply two copies of the same row-adding code.
Change-Id: I12240dedf2649c314ad32984f4de9d6b9bf280d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The typeSignature for a type T[] is always "[" + typeSignature<t>, so we
can just implicitly support arrays of any known type. To prevent support
for multi-dimensional arrays, make sure that the underlying type is not
also an array.
By adding a QJniTypes::isArrayType in addition (that is true for any
type with a signature starting with '['), methods like
QJniObject::callMethod could then return a special QJniArray type that
provides array-specific functionality.
As a drive-by, and since all lines need to be touched to add braces,
replace std::is_same<>::value with std::is_same_v.
Change-Id: Iccadf03cfceb8544381a8f635bb54baeddf46c99
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
It was our old, HP-UX machine on Itanium (ran on big-endian mode). We
don't support HP-UX any more; HP will still support the 11i v3 release
until 2025, but I doubt anyone wants to run any new software there. One
hopes that HP has long since fixed the issue, but I doubt it since the
last release is from 2007. Gravlaks probably ran HP-UX 11i v3.
There are a couple other left-overs of ".troll.no" in the repository,
the majority of which are URL manipulation in tst_qurl.cpp and in
tst_qnetworkcookie.cpp, then the certificates for fluke.troll.no (valid
until 2035) and aspiriniks.troll.no (expired in 2009, but we don't need
it for validity).
Change-Id: I810d70e579eb4e2c8e45fffd1719122747d7b85a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
To indicate success of a conversion, the public API has previously only
supported registering member functions of the form To (From::*)(bool *).
When adding custom converters for types that cannot be modified, this is
usually not a possibility.
As an alternative, this patch adds support for std::optional in the
UnaryFunction overload of QMetaType::registerConverter. If the returned
optional has no value, the conversion is considered failed.
Task-number: QTBUG-92902
Change-Id: Ibac52d2cb9b5a2457081b4bebb0def1f03e3c55d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
__has_include(<chrono>) is always true, because C++11 chrono include
is required since 6.0.
Pick-to: 6.4 6.3 6.2
Change-Id: I50cb92571bf4f1f86e2f3f2b5f486dd3c3f30f4a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Refactor QWinRegistryKey to make it more modern and more
usable from outside.
Adjust the test for QWinRegistryKey to test the new functions,
merged with the original test.
Will port raw registry accessing code in QtBase to use this
class in follow-up commits. This change is the first step.
The long term goal is to port QSettings registry code to
this class instead of using raw Win32 APIs, however, there's
much more registry code in QSettings and migrate them to this
class needs a large refactor, so jsut leave it for now. Will
fix it in some future commit.
Change-Id: Iada2adb41b4d58e1b658ff6870a4b31ace479d43
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Some tests in corelib/kernel need threading support, but they are not
guarded against compilation if Qt is built without threading.
Such tests have been disabled in this case.
Change-Id: I2f5dc9582f2a59b6af2a9e56638b045dca06193d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Batching the tests leads to one of the tests tst_qmetaobject and
tst_qmetaobject_compat not being registered in the batch. Attempts to
batch those together fail as batch test name is defined per-source,
which, in this rare case, is the same across the two targets.
Change-Id: I356931feabc004c39ba0b6863b5f64e06d739a58
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
[ChangeLog][QtCore][Meta Object] QMetaMethod::invoke(),
QMetaObject::invokeMethod(), and QMetaObject::newInstance() are no
longer limited to 10 arguments.
[ChangeLog][QtCore][Meta Object] The use of the Q_ARG macro is no longer
necessary when using QMetaMethod::invoke(), QMetaObject::invokeMethod(),
and QMetaObject::newInstance(). Types may now be passed
directly. Similarly, Q_RETURN_ARG can be replaced by the free function
qReturnArg().
[ChangeLog][Potentially Source-Incompatible Changes]
QMetaMethod::invoke(), QMetaObject::invokeMethod(), and
QMetaObject::newInstance() no longer support passing forward-declared
types in the argument list (it was possible to pass them by
const-ref). From Qt 6.5 onwards, all types in the argument list must be
fully defined.
[ChangeLog][Potentially Source-Incompatible Changes] Attempting to use
the internal types QArgument, QReturnArgument, QGenericArgument, or
QGenericReturnArgument directly with QMetaMethod::invoke(),
QMetaObject::invokeMethod() or QMetaObject::newInstance() may fail to
compile. Those are internal types that were never meant to be used
directly and will be removed in Qt 7. If really necessary, ensure all
arguments passed to those functions are directly using those classes and
not mixed with Q_ARG and Q_RETURN_ARG. Implementations of bindings to
other languages should contact the Qt development mailing list to
discuss options.
Change-Id: I36b24183fbd041179f2ffffd1701e3e8e47e0fba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The doc of QMetaEnum::valueToKey() says to use ::valueToKeys() instead
for flag types.
Pick-to: 6.4
Change-Id: I48e5ba47324137f2ce2710f1d876e93e7c562e9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
[ChangeLog][QtCore][Meta Objects] The QMetaObject::invokeMethod() taking
a method name by string, QMetaObject::newInstance(), and
QMetaMethod::invoke() now support more than 10 arguments.
[ChangeLog][QtCore][Meta Objects] The use of the Q_ARG and Q_RETURN_ARG
macros is now optional with QMetaObject::invokeMethod(),
QMetaObject::newInstance(), and QMetaMethod::invoke(): the type name
will be obtained from the C++ type (the same as QMetaType). The function
qReturnArg() can be used in place of the Q_RETURN_ARG macro. The macros
are still useful in rare conditions where the type was typedef'ed from
its original name.
Change-Id: I36b24183fbd041179f2ffffd17022a2b48c7639b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The patch includes the following replacements:
* QMetaType::type("name") -> QMetaType::fromType<Type>().id()
* QMetaProperty::type() -> QMetaProperty::typeId()
* QVariant::Type -> QMetaType::Type
* qRegisterMetaType<T>("name") -> qResigeterMetaType<T>()
* The static QMetaType::{load,save} methods are replaced with
non-static versions
* Replace QCOMPARE(property.type(), QVariant::UserType) with
QCOMPARE_GT(property.typeId(), QMetaType::User), because the
deprecated type() method was treating each custom type
(id >= QVariant::UserType) as QVariant::UserType, while the
typeId() method simply returns the actual id.
As a drive-by: remove unneeded QMetaType registration tests
as we have tst_QMetaType to check it.
Task-number: QTBUG-104858
Change-Id: Ia08e002efdf07ff83366a5193164dba96a956f9a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The most common changes are:
* Replace QMetaType::type("name") with QMetaType::fromName("name").id()
or QMetaType::fromType<Type>().id()
* QMetaType::typeName(int) -> QMetaType(int).name()
* QMetaType::typeFlags(int) -> QMetaType(int).flags()
* QMetaType::metaObjectForType(int) -> QMetaType(int).metaObject()
* The static QMetaType::{load,save} methods are replaced with
non-static versions
* The static QMetaType::{create,destroy,construct, destruct} methods
are guarded by QT_DEPRECATED_SINCE calls. The tests are also
extended with non-static calls where they were missing. Fixed
potential memory-leaks in these tests.
Add separate unit-tests for deprecated APIs and guard them with
QT_DEPRECATED_SINCE
As a drive-by: use nullptr instead of 0 in some places
Task-number: QTBUG-104858
Change-Id: I4b0cdd29bc197c186b835002372240aae3098c33
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Qt 6.0, QMetaType stores the name obtained from the C++ compiler,
which means we know a type like Qt::Alignment by its proper, full name
of QFlags<Qt::AlignmentFlag>. However, the meta object records only the
bare name of the enumeration, not the full flags.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-105932
Fixes: QTBUG-96185
Change-Id: Ic6547f8247454b47baa8fffd170eab977e306377
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
For those, moc does know their type ID, and yet they may be still
forward-declared in the C++ side, so the meta object may have recorded a
null pointer in the metatype array.
Fixes: QTBUG-105832
Change-Id: Ic6547f8247454b47baa8fffd170dae07c0813dc7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The QObjectPrivate::declarativeData member is stored in a union with
currentChildBeingDeleted. The QObject destructor always sets the
currentChildBeingDeleted member of the union. It also sets the
isDeletingChildren bool, which is the only way to find out which union
member we can safely access.
While the QObject destructor is deleting children and isDeletingChildren
is set, we must not access the declarativeData member of the union.
Add a test case that initializes the function pointers for the
declarative handlers and constructs a situation where an object
emits a signal while it is destroying children.
Fixes: QTBUG-105286
Pick-to: 6.4 6.3 6.3.2 6.2 5.15
Change-Id: Iea5ba2f7843b6926a8d157be166e6044d98d6c02
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DISABLE_DEPRECATED_BEFORE macro is
renamed to QT_DISABLE_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the new
name is not defined.
Task-number: QTBUG-104944
Change-Id: Ifc34323e0bbd9e3dc2f86c3e80d4d0940ebccbb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The way the Qt 6.0 QMetaTypeInterface was designed, using a static
inline variable in a template, would normally require the linker and
dynamic linker to merge all copies and choose a single copy as the
official one. But because of hidden visibility and of Windows DLLs,
QMetaType already copes with multiple copies NOT getting merged. So we
may as well ask the linkers not to bother and use simpler, local
relocations to find those symbols.
They are all supposed to still be equivalent and it's an ODR violation
if they're not.
The Apple ld64 linker complains if you use this type of global
relocation:
ld: warning: direct access in function
[...]
to global weak symbol
'QtPrivate::QMetaTypeInterfaceWrapper<int>::metaType'
Fixes: QTBUG-93471
Pick-to: 6.3 6.4
Change-Id: Id0fb9ab0089845ee8843fffd16f98a10aa719434
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Because of the template shenanigans. This is just to make sure.
Pick-to: 6.4
Change-Id: Id0fb9ab0089845ee8843fffd16f989e7d555894f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
ownMethodIndex works for all kind of methods, also for constructors.
Therefore, remove the assertion there (that checks for non constructors)
and add a test in qtbase so it does not happen again.
The test broken by the assertion is in qtdeclarative:
tst_QJSEngine::newQMetaObject().
Also rename QMetaMethodPrivate::ownConstructorIndex() to
ownConstructorMethodIndex() as the previous naming implied that
ownMethodIndex() could not be used for constructors.
amends b73ab954df
Task-number: QTBUG-105360
Change-Id: I0244993ed79bee055645b5443f5d02e1c089a6c6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The rewrites in a1c34d8bd0,
0f76e55bc4 and in commit
b73ab954df didn't do this right, though no
problem ended up happening. In particular, the constructor one failed to
check if there were even more parameters.
Change-Id: I6f936da6f6e84d649f70fffd1706f827ba635584
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Problem description:
--------------------
Assume we have two properties, P1 and P2. Assume further that we assign
a binding to P2, so that it depends on P1. Let the binding additionally
capture some (non-QProperty) boolean, and only create the dependency to
P1 if the boolean is true.
The state afterwards is
P1:[p1vaue|firstObserver]
|
|
v
---[p2binding]
/
P2:[p2value|binding]
If the boolean is set to false, and P1 changes its value, we still
correctly re-evaluate the binding and update P2's value. However, during
binding evaluation we will notice that there is no further dependency
from P2 on P1, and remove its observer.
The state afterwards is
P1:[p1vaue|firstObserver=nullptr]
---[p2binding]
/
P2:[p2value|binding]
Then, during the notify phase, we traverse the observer's again,
starting from P1's firstObserver. Given that it is nullptr now, we never
reach P2's binding, and thus won't send a notification from it.
Fix:
----
We store a list of all visited binding-observers (in a QVarLengthArray,
to avoid allocations as long as possible). After the binding evaluation
phase, we then use that list to send notifications from every binding
that we visited. As we already have a list of all bindings, we no longer
need to recurse on binding-observes during the notification process;
instead, we only need to deal with static callbacks and ChangeHandlers.
The pre-existing notification logic is still kept for the grouped update
case, where we already have a list of all delayed properties, and should
therefore not encounter the same issue. Unifying its codepath with the
existing logic is left as an exercise for a later patch.
Fixes: QTBUG-105204
Task-number: QTBUG-104982
Pick-to: 6.4 6.3 6.2
Change-Id: I2951f7d9597f4da0b8560a64dfb834f7ad86e757
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sami Shalayel <sami.shalayel@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
We pass a pointer to uninitialized memory to QMetaType::create().
There's no harm because we're using the invalid QMetaType, but GCC is
actually right to complain for any other type.
qtestcase.h:54:25: warning: ‘buf’ may be used uninitialized [-Wmaybe-uninitialized]
qmetatype.h:454:11: note: by argument 2 of type ‘const void*’ to ‘void* QMetaType::create(const void*) const’ declared here
Pick-to: 6.3 6.4
Change-Id: I3859764fed084846bcb0fffd1703eb7967acf0d7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This adds an internal method to QMetaMethodPrivate to do the work of
actually placing the call on a given meta method. This rewrite should
make the code clearer, but make no otherwise perceptible difference in
behavior.
The next commit will rewrite QMetaObject::invokeMethod to use this new,
internal function to avoid doing a lot of string allocations.
Change-Id: I36b24183fbd041179f2ffffd170219c0deaaf7f5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is in use in tst_qdbusinterface.cpp, so let's have it here to make
sure it works:
QVERIFY(QMetaObject::invokeMethod(&iface, "ping",
Q_RETURN_ARG(QDBusVariant, retArg),
Q_ARG(QDBusVariant, arg),
Q_ARG(QDBusVariant, arg2),
Q_ARG(QDBusVariant&, retArg2)));
Change-Id: I36b24183fbd041179f2ffffd170271424c048292
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We should fail to even find the method. `QString' and `QString&` are not
compatible.
Change-Id: I36b24183fbd041179f2ffffd170259bcf07fd459
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The type MyUnregisteredType needs to be only forward-declared for the
trick to work. The issue is not about registration, because since commit
fa987d4441 ("MetaObject: Store the
QMetaType of the methods"), we will record the meta type of the type
anyway, which will eventually allow the meta object to actually find
this type.
Instead, the tests are valid for a type that is only forward-declared.
Change-Id: I36b24183fbd041179f2ffffd1702182746f7c1b2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
In one of the three calls to customConstruct() -- QVariant::detach() --
we've already checked that the type is valid, so don't re-emit the
warning there.
Change-Id: I3859764fed084846bcb0fffd1703a3c7c0fb3164
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We can implement the trivial {default,copy,move} construction outselves
inside qmetatype.cpp and qvariant.cpp, simplifying the QMetaType
interface object, removing up to three relocations per QMTI.
This adds the testing for QMetaType::isXxxConstructible and
isDestructible that couldn't be added before.
Change-Id: Ic44396b31ba04712aab3fffd16ff0a28f541d507
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This also rewrites QMetaType::id() on top of the helper, with the benefit
of calling a member static function, so QMetaType doesn't need to be
spilled onto the stack. In some upcoming changes I need to ensure that
QMetaTypes are registered so they can be found by name and I'd like to
have a dedicated function name for that, instead of calling .id().
Since I needed to add docs for the new function, I've updated for the
old one too.
[ChangeLog][QMetaType] Added QMetaType::registerType() and an overload
of qRegisterMetaType() taking QMetaType (the two functions do the same
thing). These two functions ensure a given QMetaType is registered with
the Qt global registry, so they can be found by name later. Using
qRegisterMetaType<T>() also accomplishes the same thing, but is slightly
better for completely generic code because it will avoid emitting the
registration for built-in types.
Change-Id: I3859764fed084846bcb0fffd170351d606034c22
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It's not registered until an ID is assigned.
Pick-to: 6.4
Change-Id: I3859764fed084846bcb0fffd17034f5b369c5b4d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
So long as you only ask us to copy it. Copying is mandatory, though.
I'll firm up the warning in a later commit, which may not get cherry-
picked as far back.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-105140
Change-Id: I3859764fed084846bcb0fffd170432abf65dc197
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
If the metatype does not support copy and default construction, then it
it unsuitunsuitable for use in QMetaType. We cannot prevent users from
passing in such metatypes (as we have e.g. a ctor taking QMetaType), so
verify this in customConstruct, and make the variant invalid in that
case.
Pick-to: 6.2 6.3 6.4
Change-Id: Ib1f0149c8fb9a1cce0049fd0311980754cc85d1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
For built-in types, this is a compile-time assert - we should not have
any types in Qt for which we have neither debug streaming nor a
QTest::toString specialization implemented. A build of most of Qt
submodules passes with this change, after minor modifications to some
tests. We cannot declare QSizeHint::Policy as a metatype after the
QMetaType has already been instantiated for it, and the QDebug stream
operator for QElaspedTimer needs to be correctly declared within the
namespace.
Add a self-test function for a custom type, and update reference files
of the self-test.
Task-number: QTBUG-104867
Pick-to: 6.4
Change-Id: I2936db5933f4589fce45f47cf2f3224ed614d8c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Allow specifying the Java class on which to set/get the field via its
corresponding C++ type, removing the need to explicitly provide the
Java type string.
Those were missing from a085a14d76, which
was noticed when porting QtConnectivity over to the new template APIs.
Pick-to: 6.4
Change-Id: I8f324c9fcc486b4c6c2f2b9051f7eca0cbec0e91
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QMetaTypeInterfaceWrapper tries to find the metaObjectFunction using
the MetaObjectForType template. Using SFINAE, for a QObject, it should
resolve to a suitable specialization.
Such a specialization doesn't yet exist. It had to be created.
The following path returns nullptr for registered meta types:
auto metatype = QMetaType(typeId);
requestedTestType.metaObject() -> returns nullptr since a bad template
argument is fed to MetaObjectForType<T> in
QMetaTypeInterfaceWrapper<IneritingFromQObject>::metaType's static initializer.
Change-Id: I8b31c51e12cb19c333e00480b0177354b910ce1e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit adds macros for declaring scoped native callbacks which are
in namespace or for example defined as static class member variables.
The existing macros don't allow this as they use QtJniMethods namespace
and the introduced callbacks' namespaces are not enclosed in that
namespace, yielding a compilation error.
Pick-to: 6.4
Change-Id: I754560bea7e9a1b57c2661d1ee7236e78db39ba1
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The manually defined native JNI function tables allow defining a name
that may be different from the actual function name; this name is then
used from the Java-side.
This can be useful to provide also as an option with the new
"unstringifying" macros which can help for example in porting code
to these new macros.
Pick-to: 6.4
Change-Id: Icfebfb351cb8dfb122795d20b37e2eac167a41bf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Since 4edcea762d the dropsite example
shows markdown if available; and now it shows that when we do DnD
of a selection from the richtext example, text/markdown is available.
- If we artificially make html unavailable, copying and pasting between
widget-based rich text editors uses markdown.
In case markdown writer output contains unnecessary backticks due to
monospace fonts getting used, the workaround from
1ad456c908 is applied.
Pick-to: 6.4
Task-number: QTBUG-76105
Task-number: QTBUG-103484
Change-Id: Ie6ca4dbb450dbc36b3d09fd0df1ae5909aaebca7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Set it to nullptr on clear, and deal with possibly null bindingStatus.
Task-number: QTBUG-101177
Task-number: QTBUG-102403
Pick-to: 6.4
Change-Id: I66cb4d505a4f7b377dc90b45ac13834fca19d399
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
As with method signatures, register class names using template function
specialization in the QtJniTypes namespace, and then declare C++ types
as JNI classes with a class name string. Such classes implicitly get
registered as JNI types as well.
Add a QJniObject construct method (since C++ constructors that are
templates cannot be explicitly instantiated with a type), and a
QJniEnvironment::findClass overload.
Add test coverage, also for the recently added macros for native
methods.
As a drive-by, change the name of the Q_JNI_DECLARE_NATIVE_METHOD
macro to Q_DECLARE_JNI_NATIVE_METHOD for consistency.
Change-Id: Ic19562d78da726f202b3bdf4e9354e8ad24d8bd9
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Add a template function that allows us to get the method signature
string from a free function, which are used as native callbacks methods
from Java.
Provide a macro that defines a signature object, and a JNINativeMethod
object based on it, in an internal namespace so that we don't pollute
the namespace with generated names.
Add another macro to get the generated JNINativeMethod object based on
the free function name.
Lastly, add overloads to QJniEnvironment::registerNativeMethods that
take a std::initializer_list of JNINativeMethods.
We can now declare a free function to be a JNI native method:
static bool callbackFromJava(JNIEnv *e, jobject /*thiz*/, jstring p1)
{
// ...
}
Q_JNI_DECLARE_NATIVE_METHOD(callbackFromJava);
and register it with the JNI environment like this:
QJniEnvironment jni;
jni.registerNativeMethods(clazz, {
Q_JNI_NATIVE_METHOD(callbackFromJava)
});
removing a significant amount of boiler plate code.
Change-Id: Ie4007b24125879fed3dae1f4d232b4aa95999b44
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
QMetaType can register a converter from a smart pointer class to
QObject *. The code tries to do so even if the smart pointer is
actually holding a pointer to a _const_ QObject
(e.g. shared_ptr<const QObject>), causing a compile error:
../src/qt5/qtbase/build/include/QtCore/../../../src/corelib/kernel/qmetatype.h:1208:32: error: invalid conversion from ‘const QObject*’ to ‘QObject*’ [-fpermissive]
1208 | return p.operator->();
| ~~~~~~~~~~~~^~
| |
| const QObject*
Disable the conversion if indeed the source is const qualified.
Change-Id: I9e9bc5992f74131e5cfd6ece9b83d4f26d370e92
Fixes: QTBUG-103741
Pick-to: 6.2 6.3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The unsigned return value was very un-Qt-ish, and, indeed,
tst_QCoreApplication just stored the result in ints.
Port to qsizetype, being the type of the expression that the function
calculates.
Task-number: QTBUG-103532
Change-Id: I95a81a686439b0686faad7a430adeaab66dc9e8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The only in-tree user outside QtCore is tst_QCoreApplication, guard
the (single) test function there with QT_BUILD_INTERNAL.
Change-Id: Ibc87ba76f2135cd8283acd75318f80a95e4b5c45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... in favor of including qabstracteventdispatcher_p.h, where needed.
Keeps the code DRY.
Change-Id: I5bee2e653cb29ffac2601ff03c952a4b3adbdb9c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows us to specialize JNI type signature templates for e.g. the
context object, which in Java signatures is "android/content/Context".
Introduce a Q_DECLARE_JNI_TYPE macro that takes care of the plumbing.
The types declared this way live in the QtJniTypes namespace, and
transparently convert from and to jobject. Since jobject is a typedef
to _jobject* we cannot create a subclass. Use a "Object" superclass
that we can provide a QJniObject constructor for so that we don't
require the QJniObject declaration to be able to use the macro.
The APIs in the QNativeInterface namespace doesn't provide source or
binary compatibility guarantees, so we can change the return types.
Change-Id: I4cf9fa734ec9a5550b6fddeb14ef0ffd72663f29
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Since we know at compile time whether the return type is an object type,
we can use 'if constexpr' and auto return type in the call(Static)Method
and get(Static)Field functions to call the object-type methods.
This makes the object-methods conceptually obsolete, but don't declare
them as deprecated as long as they are still used in submodules to avoid
warning floods and build failures in -Werror configurations.
Change-Id: Ic3019ed990a9252eefcb02cdb355f8a6ed6bc2ff
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This allows the compiler to deduce the template arguments based on the
provided method parameters, which we can then pass to the methodSignature
and fieldSignature helpers to generate the signature string completely at
compile time.
Since we can't partially specialize template member functions, replace
the specializations for void methods with compile-time-if branches in
the general templates.
This variadic template now prevents implicit conversion from the
LiteralStorage types to const char* signatures, so catch the case where
such a type ends up in the parameter list.
Due to overload resolution rules for constructors, we need to explicitly
disable the constructor if any of the arguments is a string literal type,
as we have to keep the old C-style variadic function working for such
calls.
Add variations that use the variadic templates to the unit tests.
Change-Id: I8734664b38bae932369462330a9a03302254c33c
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
During type normalization, we remove the struct, class and enum
keywords (see the skipStructClassOrEnum function). However, we only want
to do that for actual keywords, not for a name that happens to start
with e.g. "enum", as in "enumerationNameSpacce".
Adjust the MSVC check to still require no identifier character after the
keyword, while still allowing for some remaining characters.
Fixes: QTBUG-97813
Pick-to: 6.3 6.2
Change-Id: I82b873d02ff454cce4b75f2814a52a66f2268208
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We don't support it any more. I don't think it has ever properly
compiled Qt 6 (and it's no longer working for me against GCC 12's
libstdc++ headers). If you report a bug against it, Intel support's
first question is if you can try instead the new Clang/LLVM-based oneAPI
C++ compiler.
So we support only that one, which identifies itself as Q_CC_CLANG.
Change-Id: I5ff8e16fcdcb4ffd9ab6fffd16eb57a092c8439e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Introduce an internal QtJniTypes namespace with types that allow us to
concatenate string literals at compile time. This makes it possible to
generate arbitrary strings based on types, which we can then use as
signatures to JNI method calls.
Move some of the private members of QJniObject into the QtJniTypes
namespace for consistency, and to allow further template specialization
by user code to make other types and their JNI signature string known.
Remove the "Jni" prefix from names.
Use the compile-time generated string in QJniObject methods that created
the signature string at runtime, which involved a temporary memory
allocation.
Treat 'void' as a primitive type (with signature string 'V'), and
remove redundant template specializations.
Add a test case to verify the the strings are constructed correctly
at compile time.
Change-Id: I5e3895a97f7dc1b86961f7a7855b899d9203037d
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The functions it defines depend on many many types in QtCore for which
it did not have a #include; both files that included it thus had to
pull in QtCore to compile. Put that #include where it belongs and
clean out many specific QtCore includes that it makes redundant.
Change-Id: Ie9d9ec325d4879d771cb14baecb06fecbdaf62c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Needed for QNX, don't be overly specific with XcbUnix.
Pick-to: 6.3 6.2
Change-Id: I240313bc48d9d81d1f18f27ee11f7c9352e3e452
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
In some situation we want to notify even if the value didn't change.
Task-number: QTBUG-101771
Pick-to: 6.2 6.3
Change-Id: I7d82a9f6e0f7d5eb48065e3f428b814939181ea8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Connecting to a non-signal should fail, but apparently it doesn't on
Windows+MSVC under certain conditions.
Task-number: QTBUG-101761
Change-Id: I3e014660e4e5b287242e32307f677bb22ab10a39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In no particular order:
- use the variable field width feature of QString::asprintf() to
generate the indentation implicitly, instead of fill()ing a
QByteArray with the desired number of spaces
- just default-construct 'flags', don't assign an empty string
- use qUtf16Printable() to avoid funneling UTF-16 data through 8-bit
encodings
- use a C++11 ranged for instead of a counted loop
- remove a pointless isEmpty() guard (the loop won't execute when the
children().isEmpty())
- avoid copying object->children() (returns by cref, so it's also ok
to stuff it directly into the ranged for loop).
Add a test.
Pick-to: 6.3
Change-Id: Ie7314713cb48de7e890cdee0760c0361dd24fd18
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QObject's cache the binding status pointer to avoid TLS lookups.
However, when an object is moved to a different thread, we need to
update the cached pointer (as the original thread might stop and thus no
longer exist, and to correctly allow setting up bindings in the object's
thread).
Fix this by also storing the binding status in QThreadPrivate and
updating the object's binding status when moved. This does only work
when the thread is already running, though. If it is not running, we
instead treat the QThreadPrivate's status pointer as a pointer to a
vector of pending objects. Once the QThread has been started, we check
if there are pending objects, and update them at this point.
Pick-to: 6.2 6.3
Fixes: QTBUG-101177
Change-Id: I0490bbbdc1a17cb5f85044ad6eb2e1a8c759d4b7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The array of metatypes should always contain at least one entry (for the
metatype of the current metaobject itself).
This prevents crashes in the case of a metaobject without meta-methods
and properties (as observed in Qt for Python).
Pick-to: 6.2 6.3
Change-Id: I7a6fb316eea48c4852b6f1c26e0a930aeba4c799
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test always fails when either the Xcb or UNIX, one of the Windows
event dispatchers is used. So only test for the event dispatcher name,
which then covers all platforms, including QNX and INTEGRITY (which
use the UNIX event dispatcher).
Pick-to: 6.3 6.2
Change-Id: I2e315831b53f823c5496ad0319319df78f064cc1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Fixing documentation and removing tests.
[ChangeLog][Important Behavior Changes] The qNextPowerOfTwo()
functions now have preconditions.
Change-Id: If6d5e8bee66826910e89be7cac388a1f0422ebfd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In tst_qguiapplication and tst_qcoreapplication,
the application version should be set. On Android, this
is done using QT_ANDROID_VERSION_CODE.
Pick-to: 6.2 6.3
Change-Id: I6b473ad25092fb24df9400e0ab8fbb8ea4edbb6a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Issue introduced by commit 465701bb98.
[ChangeLog][QtCore][QMetaObjectBuilder] Fixed a bug that would cause
addProperty() to use the incorrect type for the property if the
property's name matched a valid type registered with QMetaType.
Pick-to: 6.2 6.3
Change-Id: Ic15405335d804bdea761fffd16d402f2c9611f30
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
- New testcase tst_eventdispatcher added under commit d292f0143f.
It shows that only glib implementation works correctly.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I7b861a6207fcb319de362645fc8f00a8ab6cd4b9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_qcoreapplication.cpp is used both in tst_qcoreapplication and
tst_qguiapplication. To distinguish these two compilations,
the define QT_GUI_LIB was used. This led to an error on Android,
where Qt::Gui is always linked, because the Qt Android Platform
Plugin needs it.
This patch introduces the preprocessor define QT_QGUIAPPLICATIONTEST
which is to be used only in the compilation of tst_qguiapplication.
This is then used instead of QT_GUI_LIB.
Change-Id: Ifa5bfacb197d68365288c1da85573106515fc6c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Even QtCore alone cannot be built without the properties feature since
Qt 5.5. While fixing this is easy, other modules like dbus,
networking are also using QObject::property() and friends liberally.
All in all I doubt that anybody will miss the feature (otherwise it
would have been fixed in the last decade).
Change-Id: Iaf3cc20bda54ee2ff3b809fac8fa82b94ecc88c0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove Integrity and Android specific code that explicitly adds
test data to the resource files. qt_internal_add_test functions
implicitly adds test data to resources for Android and Integrity
platforms by default.
Change-Id: Ia1d58755b47442e1953462e38606f70fec262368
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Not MSVC, but pretends to be.
Pick-to: 6.3 6.2
Change-Id: I5c201dd917e79a22d6ef15715bf1d3a7010d123e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was Linux-only and now even Linux is complaining:
tst_qmetatype.cpp:421:26: warning: ‘int pthread_yield()’ is deprecated: pthread_yield is deprecated, use sched_yield instead [-Wdeprecated-declarations]
Change-Id: I0e5f6bec596a4a78bd3bfffd16cb1eadfa301f16
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
All primitive types are initialized and have been since at least commit
33cd680ddb ("New QMetaType
representation").
Change-Id: I0e5f6bec596a4a78bd3bfffd16cb1fe22dc5c8f5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When some test function fails (even as expected), it can leave the
event dispatcher in an inconsistent state where the posted events
queue might not be empty. As a result, this may break the internal
logic of the next test function that is run.
So, calling eventDispatcher->processEvents() after each completed
function resets the event dispatcher to its initial state, which
fixes the problem.
Pick-to: 6.2 6.3
Change-Id: I5a54f892d09a6eca73c8fc82875ce3b9ce4a3242
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We set the wakeUps atomic to prevent multiple WM_QT_SENDPOSTEDEVENTS from
being posted. However, this might happen right after the event processing
thread cleared the atomic, but before it processed the previous
WM_QT_SENDPOSTEDEVENTS message. In that case, we end up with a set
atomic and an empty event queue, resulting in the event loop to block
even though there are posted QEvents.
To prevent that, always reset the atomic when we handle the
WM_QT_SENDPOSTEDEVENTS message. In that case, we either call
sendPostedEvents, or startPostedEventsTimer. The former already resets
wakeUps; reset it in the latter as well.
Fixes: QTBUG-99323
Pick-to: 6.2 6.3 5.15
Change-Id: I931c02be9c42b02e8ca20daba5059cd8185f0a37
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Add two tests for some problematic scenarios where the behavior is not
consistent across platforms and depending on which event dispatcher is
used:
1) reliably waking up the dispatcher when posting events from a worker
thread.
That test fails 100% of the time on Windows no matter what type of
application is created. It passes reliably on Linux and macOS for both
core and gui applications.
2) waking up the dispatcher when we post an event from within an
event handler.
That test fails 100% of the time on Windows, both with core
and GUI event dispatchers. On macOS, the test fails 100% of the time
with the core dispatcher, and passes 100% of the time with the GUI
dispatcher. On Linux, it passes only if a Glib based event dispatcher
is used; the default Unix event dispatcher (which is also the one
used on macOS for core applications) fails.
Task-number: QTBUG-99323
Pick-to: 6.2 6.3 5.15
Change-Id: I2489533b9f0032488707777be0512bb933669a7d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Bug introduced in 6.0. This is the only unprotected d_ptr I could find.
[ChangeLog][QtCore][QMetaType] Fixed a bug that would cause
QMetaType::compare() and QVariant::compare() to crash on invalid meta
types and variants.
Pick-to: 6.2 6.3
Fixes: QTBUG-99960
Change-Id: I0e5f6bec596a4a78bd3bfffd16cb1f7b2d146688
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
A derived gadget has an is-a relationship with its base type. It
should be convertible. In fact, canConvert() already tells us it is.
Change-Id: I71a5ac9afd78e88adb23b4d0e757f34077f63207
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Any of these timers must be stopped before the corresponding test
function completes. Otherwise, functors will operate on dangling
pointers, which can lead to failures or unreliability of other tests.
Fix this by setting a correct context in the QTimer::singleShot()
call.
Pick-to: 6.2 6.3
Change-Id: Icd23f6d9a2c6e7f33495d6badc4080a1b10c19f8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QCoreApplication::installTranslator() does not take ownership of the
QTranslator. The QTranslator dtor removes itself from QCoreApplication
again.
Pick-to: 6.3 6.2 5.15
Change-Id: I17eb7ab350631eb32fe76af29d9a576a0efa05d8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test helper is expected to crash, but when built with asan, it
just fails.
Skip the test in that case.
Pick-to: 6.3 6.2 5.15
Change-Id: I583142f5ec623895df62498100c1a30539b149ab
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We didn't delete the new'ed up QMetaTypeInterfaces, causing asan to
complain.
Fix by storing them in strong references alongside their users in a
statically-allocated container.
We use shared_ptr to hold them, because QMetaTypeInterface doesn't
have a virtual destructor, so deleting objects of the TypeInfo types
(plural!) derived from QMetaTypeInterface though a pointer to the base
class is UB. The shared_ptr constructor, however, is templated, so it
stores the correct call (~TypeInfo()) in its type-erased deleter.
We can't use std::make_shared(), because that doesn't support
aggregate initialization until C++20, so we manually new up the
TypeInfos.
5.15 is not affected.
Pick-to: 6.3 6.2
Change-Id: Ic7ec88c34e02a9e0dd3421848c0c0885f4756702
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
- add test resources to binaries
- link Qt::Gui to tst_qpointer for static build case
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I311827b9c641eaf9537091b051c15f9fcbcb9f0c
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that all platforms can deal with the full tst_QMetaType again,
remove the last traces of the workaround.
Pick-to: 6.3
Change-Id: I530cab8413f8b68903991b30a1f29b5871877a88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Let's see whether splitting the TUs has made the test amenable to be
compiled with MinGW again.
Pick-to: 6.3
Change-Id: Icde1bad20943c7648dbb119ca879bce62325bd6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Let's see whether splitting the TUs has made the test amenable to be
compiled on Clang for ARM again.
Pick-to: 6.3
Change-Id: I6bf1e31189f5058dc393adefabaf3014dce4bcf2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 925ad78024.
Reason for revert: Meanwhile, the QNX VM has been assigned more
resources, and the offending test function been split. Re-enable the
test on QNX, to get back to previous test coverage.
Fixes: QTQAINFRA-4669
Pick-to: 6.3
Change-Id: Ib085fbfa7e0d8445f007d1a9346cee3113620720
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The PRINT_2ARD_TEMPLATE macro expansion alone is responsible for about
50% of the compile time and RAM requirements of tst_qmetatype.cpp. By
factoring it into its own TU, we reduce the maximum memory load on my
machine from 4.0GiB to 2.5GiB, provided we don't parallelize the
build, then we take 0.5GiB more.
This is a quick-fix for the QNX build problems currently plaguing the
CI. Going forward, we should probably have a better solution, whatever
that may be.
Task-number: QTQAINFRA-4669
Change-Id: I2732b4c25b369b15cce1c7afe222d041ecb6795a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
... so it can be used by multiple .cpp files.
Task-number: QTQAINFRA-4669
Change-Id: I7212b9b08cd3bfa44ee741ee4789d1d0024e4708
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The old-syle signal-slot syntax had the advantage of not delivering
signals to slots in derived classes after that derived class's
destructor had finished running (because we called via the virtual
qt_metacall). The new syntax made no checks, so a conversion from the
old to the new syntax may introduce crashes or other data corruptions at
runtime if the destructor had completed.
This commit introduces a Q_ASSERT to print the class name that the
object is not any more. Since this is in inline code, this should get
enabled for users' debug modes and does not therefore depend on Qt being
built in debug mode.
It required some Private classes to be adapted to the new form, by
exposing the public q_func() in the public: part.
Pick-to: 6.2
Fixes: QTBUG-33908
Change-Id: Iccb47e5527544b6fbd75fffd16b874cdc08c1f3e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The compiler runs out of memory and fails to compile tst_qmetatype.cpp.
Set TST_QMETATYPE_BROKEN_COMPILER from a previous compiler workaround
for QNX to disable the most expensive part of the test.
Task-number: QTQAINFRA-4669
Change-Id: I3a99b6b790dc074e9d1db262e758555fb45e4331
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
QObjects must be deleted if the QCoreApplication is being destroyed.
This was previously done by implementing custom code in qtbase and
other modules. So unify it and introduce a Q_APPLICATION_STATIC,
based on the Q_GLOBAL_STATIC, which centralises the logic.
Since we still have a few remaining living QObjects,
this comes in handy to fix those as well.
Task-number: QTBUG-84234
Change-Id: I3040a2280ff56291f2b1c39948c06a23597865c4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The source was already protected, but the destination wasn't.
Pick-to: 6.2
Change-Id: I300f19c3e65abd8bc1eef4309aefa11852d1c049
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In case the class doens't have a default constructor, checking for
object.isValid() will give false because the object won't be created,
however, the class could still be loaded and we could have a valid
jclass.
Pick-to: 6.2
Fixes: QTBUG-96069
Change-Id: I8d59e26d9d7c0e8e363ce443937091a374a24473
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Don't rely on transitive include from qobject.h, which will go away.
Change-Id: I99dd97ff4fb1d0632d040daab0bffa2d7b85d3ae
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
tst_qvariant.cpp:3624:15: warning: ‘void* memcpy(void*, const void*, size_t)’ writing to an object of type ‘class QVariant’ with no trivial copy-assignment; use copy-assignment or copy-initialization instead [-Wclass-memaccess]
Change-Id: Ic17a33f599b844d8ab5dfffd16aafcbd74823696
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add additional template argument to QObjectCompatProperty to specify
a custom getter. This may be useful for classes like
QAbstractProxyModelPrivate the need to customize property getters.
Task-number: QTBUG-89655
Change-Id: I34fe4bdebbbf1446aff60bd20a946454607f52d5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
- GHS's __PRETTY_FUNCTION__ (used by QT as Q_FUNC_INFO) doesn't have spaces
round the = operator when indicating the type of the template parameter.
The compilation error:
qt5/qtbase/src/corelib/kernel/qmetatype.h", line 2104: note #3316-D:
cannot access position 53 in array of 49 elements
constexpr const char *begin = func + prefix;
^
detected during:
instantiation of
"auto QtPrivate::typenameHelper<T>() [with T=void]" at
line 2186
Task-number: QTBUG-97087
Pick-to: 6.2
Change-Id: I33e61f5d54a61944a5aecf07d149a8dee0ef1e5d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This define used to be set for the entirety of the Qt build but
was lost during the qmake->CMake transition. Re-enable it.
Change-Id: Idc4cb6ada485158559485b60f62f76439550b255
Pick-to: 6.2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
- getgrgid/getpwuid are not supported
- the default constructor of "ObserverOrUninit" must be referenced for GHS compiler
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I24093da76e116aba4b87a8f5c5763b03d082a2cd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch removes most of the checks that are made using C++20
__cpp_* macros for features available in C++17 and earlier.
Library feature check macros (__cpp_lib_*) are unaffected.
Change-Id: I557b2bd0d4ff09b13837555e9880eb28e0355f64
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This header is a C++17 feature that is already used unconditionally
in qtypeinfo.h.
Change-Id: I26330d298e95102f3e94c0c69fc95c1025666eb4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Qt requires a compiler that support C++17 thus __cplusplus
is always 201703L or higher. This patch removes checks
for __cplusplus value that always succeed.
Change-Id: I4b830683ecefab8f913d8b09604086d53209d2e3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Amends ca54b741d6.
operator< is not constrained in MSVC's standard library, either.
Pick-to: 6.2
Fixes: QTBUG-96690
Change-Id: Ibcbb9e53a1f9e8b13786f6d8c01489c61d8d2d7f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Volker Hilsheimer
Thiago Macieira
Marc Mutz
Fabian Kosmale
Ulf Hermann
Ahmad Samir
Giuseppe D'Angelo
Friedemann Kleint
Christian Ehrlicher
Alexandru Croitor
Edward Welbourne
Patrick Stewart
Johannes Kauffmann
Yuhang Zhao
Luca Di Sera
Arno Rehn
Konrad Kujawa
Mikolaj Boc
Eirik Aavitsland
Ivan Solovev
Lucie Gérard
Sami Shalayel
Juha Vuolle
Shawn Rutledge
Allan Sandfeld Jensen
Sona Kurazyan
Pasi Petäjäjärvi
CI Insignificant Platforms Monitor Bot
Andreas Buhr
Tatiana Borisova
Kai Köhne
Mårten Nordheim
Alexey Edelev
Alex Trotsenko
Joerg Bornemann
Mike Achtelik
Assam Boudjelthia
Ievgenii Meshcheriakov