This test checks the access permissions for '/etc/passwd', however the
filesystem on Blackberry is always read-only
Change-Id: I9299531397d4467287541b04184540ad6e2eae72
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QArrayData can point to data it does not own (cf. fromRawData()), which
shouldn't be modified. Not even upon destruction, as this data can live
in Read-Only memory or be otherwise shared outside the QArrayData realm.
Change-Id: I8bdf3050a17802fb003b77d5f543fe31769a7710
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
This test actually passes on Windows, so removing the QSKIP
Task-number: QTBUG-24543
Change-Id: Ic2666665f2882392aec92a665f51d6c5dd3355f8
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The TRUE and FALSE macros are obsolete and should be replaced with
true and false (all lower case) respectively.
Change-Id: Iee352e8173500683e6319be0abbf5bacf29016e0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This overload avoids the needless heap allocation that the traditional
overload incurs due to the implicit QChar -> QString conversion
involved there.
In order to share the implementation between the two overloads,
QStringList_join now takes the separator as a (Char*,int) tuple
instead of as a QString.
Change-Id: I92961f13a3f19099de2a6e2df9f4789a12fc83a0
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fills the gap left by QWidgetStar, making the sequence
between FirstCoreType and LastCoreType contiguous, which some
benchmarks assume to be true anyway.
Change-Id: I2d5d202b6246a9065fdf77f325a4a04279dbe4b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test has one unstable failure on Windows, so mark this with QEXPECT_FAIL
Task-number: QTBUG-26906
Change-Id: I2f6c63ddefecacd224d93f83e6951e961a02a051
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Doing element-wise insertions for the full range of the test made
testing under valgrind extremely slow. When a reallocation is detected
we now resize() the container close to capacity(), while verifying this
doesn't unnecessarily re-allocate either.
Change-Id: Idf7015cf390e366fe444e7ca14c904a2d54ff48b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both insert and replace have this overload, so one reason to add it
to append(), too, is consistency. But I can also make good use of
this overload in the the new QStringList::join(QChar) overload, so
it's actually useful in its own right.
Change-Id: Iccd48f9cb84831399e4db7e3e78eba25c0ced30d
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This function only makes sense on a developer build. In non
developer-builds you get:
tst_qtextboundaryfinder.cpp:116:13:
warning: ‘void generateDataFromFile(const QString&)’
defined but not used [-Wunused-function]
Change-Id: Id1bda2d27b00048f7401606959b566a59c05b38d
Reviewed-by: Toby Tomkins <tjtomkins@gmail.com>
If setQObjectShared crashes because a QObject is tracked by two
different QSharedPointers, we lose the debug feature offered by #defining
QT_SHAREDPOINTER_TRACK_POINTERS, as the check done by this define
happens after the setQObjectShared call.
Therefore, move setQObjectShared after the internalSafetyCheckAdd call.
This is actually a noop change in 5.0, as setQObjectShared does nothing.
However it prevents a bug in case the Qt 4 behaviour is brought back
in some later version.
Change-Id: I71340d0f878828354537762d01c46d441efc918c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt 5, when streaming an invalid QDate using a QDataStream version
earlier than Qt_5_0, QDate.jd is written and read as 0, which is an
invalid julian day for Qt versions earlier than 5.0. For Qt 5.0
however, 0 is a valid julian day, so when comparing a deserialised
invalid date (read using a QDataStream version < Qt_5_0) against a
default-constructed invalid date, they won't compare equal when they
should.
Task-number: QTBUG-26989
Change-Id: Ia76df493471f3b068c7d7187be20e3178eff2cc7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This detected the same missing detach()s in QUrl::resolve.
Everything else works, no need for a mutex in Qt5's QUrl.
Change-Id: I0da51b7b0c6b810d314a26d4b638383cd17de12b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just to make it clear which two sections go together.
Change-Id: If3724d1c84172a61bdd7931cc567f4b7140d4f8a
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
availableMibs() unconditionally adds 2107 to the list of mibs. The patch
ensures that codecForMib() also knows about this special TSCII codec.
(Note that the autotest only really checks this code path if only this
test case is run. The other tests already fill the internal codec cache
otherwise).
Change-Id: Id987d7cecd5f5700cca75e9b85b37011f8e5c622
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
@p replaced by \a, \QD replaced by {Qt Designer}, couple of enums etc.
Change-Id: I315510690bf52e42db519292b4122fa24c73bbc9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
The current implementation of qIsNull only returns true if the value is
positive zero. This behaviour is not useful for use cases like
QPointF::isNull, where QPointF(-0, -0).isNull() will return false.
There doesn't seem to be a reason why the function exhibits this
behaviour (-0.0 is not accounted for in the unit tests), and for the
case of QSizeF::scale it causes a bug: qIsNull is used to check for
division by 0.0 before it proceeds, which fails in the case of -0.0.
Task-number: QTBUG-7303
Change-Id: I767e5280bd26614e8e78ae62b274eb9bc4ade385
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
"The documentation states that "secsTo() does not take into account any
milliseconds", however, this is not the case. Given times 12:30:01.500
and 12:30:02.400 secsTo returns 0. If milliseconds are not taken into
account, I would expect this to return 1 (i.e. interprets the times as
12:30:01 and 12:30:02 thus truncating the milliseconds)."
Note that tests were also written for QDateTime::secsTo(), as it uses
QTime::secsTo internally. This addresses Javier's issue in the
comments of QTBUG-9304.
Task-number: QTBUG-9304
Change-Id: I9efe0c8f710db859c1d086d67ba3e5b349a56c4e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime currently serialises its private Spec enum. If a user was to
deserialise the individual components of a QDateTime separately, the
resulting timeSpec may be invalid when cast to the Qt::TimeSpec enum.
E.g.:
QDateTime dateTime(QDate(2012, 8, 14), QTime(8, 0, 0), Qt::UTC);
// ... serialise
// ... deserialise date, time, spec separately.
// spec == 2, the value of QDateTimePrivate::UTC.
// spec != UTC, will be set to LocalUnknown.
QDateTime deserialised(date, time, spec);
This patch serialises QDateTime objects in UTC and the value of
timeSpec() as opposed to QDateTimePrivate's spec. This changes the
serialisation behaviour of QDateTime for version 13 of QDataStream.
Task-number: QTBUG-4057
Change-Id: If650e7960dca7b6ab44b8233410a6369c41df73a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The asymmetry is intentional: the getters can use toLatin1() because the
called functions, with a QUrl::FullyEncoded parameter, return ASCII
only. This gives a small performance improvement over the need to run
the UTF-8 encoder.
However, the data passed to setters could contain non-ASCII binary data,
in addition to the percent-encoded data. We can't use fromUtf8 because
it's binary and we can't use toPercentEncoded because it already encoded.
Change-Id: I5ecdb49be5af51ac86fd9764eb3a6aa96385f512
Reviewed-by: David Faure <faure@kde.org>
Just in case someone (like me) changes the function signatures or adds
new functions.
Change-Id: I1025fea012d95ffe89acaf799aa58fd2b0babc80
Reviewed-by: David Faure <faure@kde.org>
Those are regular, integer types, of 16- and 32-bit width,
respectively. C++11's std::atomic supports them, so we should too.
C++11 also supports wchar_t, but since that type's size can change, I
don't feel like support for it in Qt is pressing.
Change-Id: I945b641c91a8a98be82715f878c382dee58ac98b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This allows one to write code that depends on these values at
compile-time.
Change-Id: I7d78524ed9c70d4141360496d1d764dcbfa92e62
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows us to remove the odd hacks to get the static metaobject
for the QWidget* metatype.
The QWidget* is still an automatic metatype thanks to the QObject
partial template specialization. It is registered as a metatype
at runtime automatically in qwidgetsvariant.cpp.
Change-Id: Ie01b69eadf2cbe87af1a86c3284550f60dcf9e94
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is necessary whenever QPersistentModelIndexes are changed. Omitting
it means that views are not able to react to the change, such as QTreeView
clearing its (manually held) QModelIndex cache, and the QItemSelectionModel
clearing the item from its storage.
It is necessary to change a QSortFilterProxyModel test which assumed setItem
does not have any such effect. That test is ported to setData instead.
Task-number: QTBUG-18539
Change-Id: Id7a602f18b9773ba4d11019418de886860d26d3e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
qUncompressCorruptedData() no longer hangs on QNX 650 and Blackberry OS
sytems.
Change-Id: Id131f9f1c6dcd358c152675c7e29ab937052c1d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modeltest asserts before the patch, and passes afterward.
Task-number: QTBUG-26515
Change-Id: I08a89cd5c9c59613badcddbd056a3d0b8fbbca13
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These functions are a faster version of {,!}qgetenv().is{Null,Empty}(),
a common pattern in Qt code.
Their main advantage is that they don't need to allocate memory, so
they can be used in noexcept functions, or dynamic initialisation of
namespace-scope statics, because throwing in these contexts invokes
std::terminate().
Change-Id: I651c5bd72f450b5d7df76590f8791572fe992af5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Library code might need to know this, e.g. when calling an external
process, to give it the right configuration. (For instance when
ksycoca code calls kbuildsycoca to recreate the DB at the right place).
Change-Id: I343ddefff816586f9d391973c08ff1e1ad86bf0e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit f9a17d7f0f fixed it for the case
where the sender object is in a different thread at transition setup
time. However, it still didn't work if either the sender object or the
state machine was moved to a different thread at some later time,
before the machine was started.
Therefore: Bite the sour grape and traverse all the machine's
transitions when the machine is being started, registering those
signal transitions whose sender objects are in other threads.
This will increase the machine's startup time (proportional to the
number of transitions), but at least it works in all known scenarios,
meaning we don't have to document weird restrictions regarding the
order in which the user's operations have to be done.
Task-number: QTBUG-19789
Change-Id: I5f1dd1321994e49635f52be65cf56d2678ed1253
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The SCXML spec states that entry order should be equivalent to
"document order" and exit order should be "reverse document order".
Since QStateMachine uses child order for the entry order, the exit
order should be reverse child order.
Change-Id: Ia7b05fdd5c9261ccf202f64f8d23f5c88b20a8c3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Ensure that the parsing mode is cascaded down from setAuthority and
setUrl so that the hostname parsing does not attempt to decode
percent-encoded hostnames when it shouldn't.
Take the opportunity to also remove the "Boolean Trap" from
QUrlPrivate::setHost.
Change-Id: Ia64754c4a4900182700b7af1382aea8410abc7e9
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The URI RFC defines schemes as containing only a very restricted set
of characters, none of which require encoding, so don't even
try. Testing this behaviour in some web browsers indicate that they do
not accept percent-encoded schemes either.
Change-Id: I692dd20e1aac7e8a1bcb276cb5113b5802393d38
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
If the password is empty (but present), the userinfo component of the
URL should end in a colon (":"). QUrl already supported that and it
was tested (case "password-empty").
If the username is *also* empty but present, the userinfo component is
just the colon (":"). Fix support for that case by checking if we
stored the presence flag instead of checking the size of the
component.
Change-Id: Ie224493a997dbf76b2e44dd6d55fd9674ac83c1c
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QString::fromUtf8, without an explicit size, (currently) defaults to
stopping at the first NUL. That means we need to pass an explicit
size.
Also take the opportunity to test that QUrl::toPercentEncoding also
works with the same data.
Change-Id: I79362d67afda624b01ca07b0315b611c4aa3fdda
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Unloading and reloading a plugin didn't work correctly,
because we didn't reset instance to 0 on unload.
Task-number: QTBUG-26098
Change-Id: Ic3e4497f359b1ca455be949dce9cafa9d67d8039
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use ICU to do code page conversion instead of the
builtin text codecs. With this QTextCodec simply
becomes a wrapper around ICU's ucnv_* methods.
We only keep our own codecs for UTF-*, ISO-8859-1,
ISO-8859-15 for performance reasons, and for TSCII
and iscii-* because they aren't supported by ICU.
Change-Id: I4fc49eba55cf772b9772c6dac606a47a44346a60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is working, but let's just be sure by adding a testcase.
Change-Id: I8c6b5ded0c7b6c90645dbf70a7ce6c1ba447a284
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test was using some QSpinBox instances to generate signals for
testing. Use our own QtTestObject to generate the signals instead.
Change-Id: I3714955ae040d541c3b613a478945c38a18be18d
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This is useful for inserting a string without space-handling, given that
dbg.nospace() followed by dbg.space() inserts a space.
It's also useful for QDebug operators for custom types, so that they
can disable space handling and then restore to whatever it was before
(rather than forcing it to space() mode).
Change-Id: I9d72e9ffbcbc581ed093168752c29af924405b33
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When containing a QObject (or sub-class) pointer and trying to convert
to a QObject pointer canConvert() did dereference the pointer without
checking for it being null.
Change-Id: Ie274e54f2f817f2b6c5df64504f8af6359b8f38d
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This avoids test instabilities and prevents test directories
from being cluttered with temporary files. Change tests
accordingly. Remove unused createLink() method.
Change-Id: I843c28ab81c8a476c71c5211a7479b22d3d9fc93
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This allows to check whether QMetaTypeId2::MetaType exists, and can help
turn run-time into compile-time expressions, even without constexpr support,
or in situations where constexpr can't be used (because you can't overload
on it). This was designed for the QMetaType::registerConversion feature,
but it's much more widely applicable.
Change-Id: Iafa04add04bcb531b3f7fe3e751c7e91ee6a3bc0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Also check the return value of
DefaultValueFactory<QMetaType::Void>::create(), the same way it's
done in testCreateHelper<QMetaType::Void>().
Change-Id: I3e6d7fca4ea74dbe65009f2eb2c64a1b3a370d68
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is a simplified port of KDTools' KDAB_SET_OBJECT_NAME.
It simply assigns the variable name as the objectName of
a QObject, uic-style. It uses a small helper function so
that it works on references as well as pointer variables.
QLabel label;
QLabel *pLabel = new QLabel();
Q_SET_OBJECT_NAME(label);
Q_SET_OBJECT_NAME(pLabel);
Change-Id: I25fec0c90f33249a3ea5d2dd622ab708019fd101
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This makes development on the meta type system easier because only
QtCore must be re-built to run most of the tests. The existing
QGuiVariant test needs to be run before pushing anyway, but not
so frequently.
Change-Id: I1fa66edbd790c957e1a232226847dd550227a477
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The type needs to be large enough that
QVariantIntegrator<T>::CanUseInternalSpace is true.
Change-Id: I311c44bedfebd946e41639975df206c27b6d55ca
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
For consistency with qMetaTypeId, and because we can.
Change-Id: I6882a16ef3c0d84539048c9f2c201c4a2b2ca7ad
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QModelIndex is a build-in type nowadays and doesn't
need to be registered anymore.
Also remove them from the tests.
Change-Id: I47029972651c045c880cee86fb292116a29493d5
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This allows building the QVariant tests without the QtWidgets module.
Change-Id: I7cd7e78a60c7bc7614ec16df1abe1e93e45d4923
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
WinAPI GetTempPath() sometimes returns short names
for C:/Users/<user>/AppData/Local/Temp.
Change-Id: I33f991acc06e652ccd484d36a5a384eb776f8395
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This makes it possible to add API for setting the restore policy
per state, or even per property assignment (QTBUG-17861).
This change is fully source compatible with Qt4.
Change-Id: I53628546b070f6fc84891f86e7ad7bd8ef5ba285
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Back when QStateMachine was changed to inherit QState, this
constructor was conveniently left out because setting the state
machine (root state) to be a parallel state group didn't actually
work. But as of commit d281aa6936,
it does work, so add the missing constructor.
Task-number: QTBUG-15430
Change-Id: I68c599baa0ef1bfc869195140cf5daf645e75b8b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
under extremely rare circumstances this would have actually failed
Change-Id: I4132d0f82e9f924e92e9e96f6d34451c94a67201
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Since Qt's connections are thread-safe, QStateMachine's plumbing
around them should be thread-safe too.
Change-Id: I8ae91c2edc2d32ca4ed4258b71e5da22de30ed91
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
By default, QStateMachine lazily registers signal transitions (i.e.,
connects to the signal) when the transition's source state is
entered. The connections are established in Qt::AutoConnection mode,
which means that if the sender object lives in a different thread,
the signal processing will be queued.
But if a sender object's signal is used in an out-going transition
of the target state of the queued transition, it's possible that a
second signal emission on the sender object's thread will be
"missed" by the state machine; before the machine gets around to
processing the first queued emission (and registering the
transitions of the new state), a sender object on the other thread
could have emitted a new signal.
The solution employed here is to eagerly register any signal
transition whose sender object is on a different thread; that is,
register it regardless of whether the transition's source state is
active.
Conversely, when a machine's transitions are unregistered (i.e.,
because the machine finished), signal transitions with sender
objects on other threads should be left as-is, in case the machine
will be run again.
This doesn't solve the case where the sender object is moved to a
different thread _after_ the transition has been initialized.
Theoretically, we could catch that by installing an event filter
on every sender object and handle the ThreadChange events, but
that would be very expensive, and likely useless in most cases.
So let's just say that that case isn't supported for now.
Task-number: QTBUG-19789
Change-Id: Ibc87bfbf2ed83217ac61ae9401fe4f179ef26c24
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Some of the transition constructors didn't call the maybeRegister()
function, causing the transitions to be ignored if they were created
when the state machine was running and the transition's source state
was active.
Added tests that cover all possible cases.
Change-Id: If1b593b127bd719e3be4e5a2e6949a780c4e97c3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
The originalSignalIndex member was not set if the signature had to be
normalized. This caused the SignalEvent passed to onTransition() to
report a signal index of -1.
Improve the signal transition tests so they check both the event
passed to eventTest() and onTransition().
Change-Id: I5331fd1944d53310b6d11eb2fd8713b80faa53a1
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Use the same trick as used for private signals in the models.
Change-Id: I4235788490cae0e3d554565621d145652dc5b0ca
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The private signals can not be used as function pointers, as
required by the new syntax, so we introduce a parameter which
can only be created privately.
Change-Id: I3d7bb8a163e764d685e8007cba831fb77e3c6855
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Type traits can not be changed durring Qt5 life time.
Change-Id: If69f65ff2113c901580afee91b11ae1b11c13a4f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Replace a list of QFuture<void>s and a loop that calls waitForFinished()
on each of them with a QFutureSynchronizer<void>, which does exactly that.
Change-Id: I1f2e90169a5b2949bd8cb9d1009a5a7af1500139
Reviewed-by: David Faure <faure@kde.org>
The SCXML spec had a bug that would cause the initial state of a
compound state within a parallel state group to be entered even if
the transition specified another (non-initial) state of the compound
state as its target. This only happened if the transition had
multiple target states.
The bug has been fixed in recent revisions of the SCXML spec. This
commit implements the fix, which is to walk the ancestors of the
transition's target states only after all the target states
themselves have been added, so that the default initial states are
correctly overridden/ignored.
Task-number: QTBUG-25958
Change-Id: Iac532047678c483a4a3996e24dacf30e00f6bbe0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Remember to register the metatype where we use it, so we don't depend
on another test being run previously.
And skip the setWorkingDirectory test completely on Unix. I don't know
why it needs to be skipped, but if we're not going to verify anything,
don't even try to do anything. This saves us one memory leak at least.
Change-Id: I22e151cc3fa7b4e976972aca8978b88b263d9bee
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is accomplished by introducing dependencies to catalogs.
This requires one API change:
QTranslator::load(const uchar *, int);
changes to
QTranslator::load(const uchar*, int len,
const QString &directory = QString());
Since now, even the load from memory might need a directory if
the memory block contains a qm file with dependencies.
Change-Id: I781f333d07f53bb431d0a7b5fa1abe282dc4d338
Task-number: QTBUG-26138
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
As requested by Winfried Schenke:
"QPoint should have an unary operator+ (the unary operator- exists).
Classes with arithmetic operators should provide a complete set of
operators, because some template code relies on it."
Task-number: QTBUG-22913
Change-Id: Ib0c5105975f56c15f00bb48d83c8d911f5a204ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Improve test coverage for QPoint and QPointF.
Separate QPointF tests into their own project.
Change-Id: Id28dc5b85aba9fc179d87b2bca1d99854f27a5ab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QStateMachine inherits from QState, so it should be possible to set
its childMode to ParallelStates, and it should behave as expected
(the machine should emit the finished() signal when all its child
states are in final states).
Task-number: QTBUG-22931
Change-Id: Ic436351be0be69e3b01ae9984561132cd9839fa7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
It's legal to set a QFinalState as the initial state. The state
machine should correctly emit the finished() signal upon entering
such a state in the initial transition, and don't do any further
processing.
Change-Id: Ica8d3fadbbde604512ea1136624af54eb3b13b11
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
In the old implementation, property assignments
(QState::assignProperty()) were "second-class citizens".
Assignments were not really integrated into the state machine
algorithm, but rather done as a separate step
(QStateMachinePrivate::applyProperties()). While that was
convenient for SCXML spec transcription purposes, it resulted
in some pretty poor semantics on the user side:
* Properties were not assigned until _after_ both the
QAbstractState::onEntry() function had been called and the
QState::entered() signal had been emitted.
* Automatic property restoration (QStateMachine::RestoreProperties)
did not play nice with nested states (and parallel states, in
particular).
The proper fix is to refactor the implementation to make
property assignments first-class in the core state machine
algorithm (QStateMachinePrivate::microstep()).
In practice, this meant splitting some steps. Instead of calling
exitStates() straight away, we now first only compute the states
to exit (without actually exiting them), and use the resulting set
to compute which properties are candidates for restoration.
Similarly, instead of calling enterStates(), we first only compute
the states to enter (without actually entering them), and use the
resulting set to compute which properties are assigned by the
entered states.
With that in place, the rest was a matter of moving the various
chunks of the old applyProperties() logic to the place where they
belong in the per-state entry/exit.
All existing autotests pass. Added several tests that verify the
desired semantics in more detail.
Task-number: QTBUG-20362
Change-Id: I7d8c7253b66cae87bb0d09aa504303218e230c65
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This test used requires(contains(QT_CONFIG,private_tests)) in its
.pro file, but did not subtract itself from its parent project
SUBDIRS when private_tests weren't enabled.
Change-Id: Idcd0893c4804a8217e4dd33ba9838ff67e996f58
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the transition has no target states, that means the current state
won't change; hence, property assignments should not be performed.
In particular, properties should not be restored to the values they
had before the state was entered.
Change-Id: I237bbb541f939c272777e70c5f26c886ec457a17
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Previously, a registered restorable property would only be
unregistered if the property was animated (see
QStateMachinePrivate::_q_animationFinished()).
But if a property is set directly, it should also be unregistered;
otherwise, the state machine would use the previously saved (stale)
value the next time that property should be restored.
Change-Id: I5d246aa5355ddd0ba5f81b0186a9f0e4f3bbaa3f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Do like QPropertyAnimation and store the QObject in a QPointer.
Purge the assignments list upon state entry and property restore.
Change-Id: I54a56885a2905178ab6aa5cf292b3d25c86b7a97
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
In qdbus_cast(), qMetaTypeId<QDBusArgument> as well as
qvariant_cast<QDBusArgument> are used. They don't depend
on any template argument of qdbus_cast(), so their
definitions need to be available at function template
definition instead of instantiation time.
But the necessary Q_DECLARE_METATYPE(QDBusArgument)
was at the end of the header, after the defintion of
qdbus_cast(), which is too late for conformin compilers.
Fixed by moving it up just after the QDBusArgument
definition.
Similarly, in tst_qdatetime and tst_qvector, the
Q_DECLARE_METATYPE() for Qt::DateFormat and QVector<int>,
and with it the specialisation of QMetaTypeId<>, were
issued after the first use of meta typing; too late for
conforming compilers.
Change-Id: I25ca0b06e68d5184597a22708404a8f2040b2de1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The name is the unique identifier. Code such as
if (oldItem.mimeType() == newItem.mimeType())
really wants to detect whether the item has a new mimetype (name),
not compare static mimetype data such as comments and icons.
Change-Id: I5fe56443295c91e1024c066ad6e7f93d842ae507
Reviewed-by: Wolf-Michael Bolle <wolf-michael.bolle@nokia.com>
Add more test data, merging operator!= tests in with operator==
to take advantage of added data.
Change-Id: If0426a3d01b8800cb7363385dbf3bcb21af5ed8f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that Q_PROPERTY with a QObject derived type is more powerful.
This property can be used in QML so that wrappers for proxy models
do not need to be created, such as in the example
at https://codereview.qt-project.org/#change,13007
Change-Id: I6ba676549d2135585d429a28e214fef0b2a6b1f9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Make test projects declare TEST_HELPER_INSTALLS rather than calling a
function exported by testcase.prf. load(testcase) may be unsafe, as
testcase.prf should be processed after default_post.prf.
Fixes silent disabling of various autotests.
Change-Id: I56b35ffd653a637ad5ab18d64dd1a1edadfac59f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Just like for the QChar::ByteOrderMark, `ch == QChar::SoftHyphen`
is much more readable than `ch == 0x00ad // (soft-hyphen)`, etc.
Change-Id: I9c85f14cfd979037d35103c3259a435fd729b869
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This will make it possible (in Qt 6) to remove the enums listing
metatype ids. As it is constexpr, it can be used in switch statements
just like enums, as enum values, and as template specialization values.
Change-Id: I51293674c403714e34cb8a8b8953522fc97a740a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
canConvert() and convert() use the metaobject to convert such types.
Change-Id: Ic05e74c5c2423b4b9682b88adc856a16dcba4cff
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This will allow conversion between pointers to compatible QObject
derived types.
Change-Id: I19e08934571fb3f1b91e594892214041fe5f6a11
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The dependencies on QFont, QBrush, QIcon are all in QtGui, so there's
little sense to still have these classes in QtWidgets.
This also copies and pastes a version of QWidgetItemData as
QStandardItemData inside qstandarditemmodel_p.h.
Change-Id: Ibafc5a30748e7ce0b54753309ae6dc4a797fc20e
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Store the signal index in QObjectPrivate::Connection, thereby making
it available in "implicit" disconnect contexts (i.e., receiver
deletion).
This change does not cause the size of QObjectPrivate::Connection
to grow (still 40 bytes on 32-bit Linux, 72 bytes on 64-bit Mac).
Valgrinding the new benchmark indicates that the percentage of the
time spent in the QObject destructor increased from 7.8% to 8.4%
on ia32, for that particular stress test; the increase is the
combined cost of calling metaObject(), QMetaObjectPrivate::signal(),
and disconnectNotify() for one connection. In practice, the measured
wallclock time increased by about 3ms for a 500ms run (which
repeatedly constructs, connects, and destroys an object).
Task-number: QTBUG-4844
Change-Id: I1beb01c753f31542fc0acb62edb4c6d165fcc5b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
When opening a QFile on stdout, for example,
we must not call seek as it is a sequential device.
This has been flagged as a warning since commit Ie3a96d3a
and has resulted in spurious warnings being emitted.
In the case of opening a QFile in Append mode, QIODevice::open
already sets the position marker, so calling seek is redundant.
This is also true for the file engine's open function (called
through openExternalFile()), which also ensures the handle or
descriptor is repositioned appropriately.
Task-number: QTBUG-26104
Change-Id: I71040c399efe54e7538f54433368b432e959e08d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Updated removeGroupSeparators(QLocalePrivate::CharBuff *num) so that it
removes also positive sign ('+') at the start of the string. Auto test
included.
Task-number: QTBUG-26035
Change-Id: I8e0e071d6c682d9192a8c6bb2f282510e21b3c48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
QVector::erase shouldn't try to make sense of iterators it doesn't own,
so the validation being done here is bogus and dangerous. Instead, it's
preferrable to assert, the user needs to ensure proper ownership.
The case of erasing an empty sequence is not checked for preconditions
to allow
QVector v;
v.erase(v.begin(), v.end());
, while being stricter on other uses.
Autotests were using ill-formed calls to the single argument erase()
function on an empty vector and were fixed. This function erases exactly
one element, the one pointed to by abegin and require the element exist
and be valid.
Change-Id: I5f1a6d0d8da072eae0c73a3012620c4ce1065cf0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes things easier for developers touching QtCore and running
all QtCore unit tests.
Change-Id: I7aa832a6a1be07d90cacad2eecb2364285ff3818
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This allows QVariant/QMetaType software (such as QtDeclarative) to
deal with smart pointers in a similar way to how they can deal with
naked pointers (accessing properties etc).
This also adds a requirement that T be fully defined when
QSharedPointer<T> is inserted into a QVariant.
Change-Id: I29e12b8a6aa5f4aadbd62f92b89bc238f64b5725
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The T must be derived from QObject, or it will fail to compile.
This will allow scripting or other 'wrapping' and runtime environments like
QtDeclarative to handle QSharedPointers to types derived from QObject
properly. A QSharedPointer<T> can be inserted into a QVariant, and
where T derives from QObject, a QSharedPointer<QObject> can be
extracted from the QVariant, and its properties are then accessible.
Change-Id: I68d6d89aceceb019267bd7301baa2047f9c09b90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently QDateTime::fromString and QTime::fromString do not correctly
handle fractional minutes and, in some cases, fractional seconds.
In the case of reading fractional minutes, it has been decided to
ignore invalid characters outside of the 5 character portion that
we're interested in (see code comments in fromStringImpl() for
info on why we read 5 digits). The motive is that there is a
performance penalty for calling mid to get the portion of surplus
string and also for converting to it to a float. This is also in
line with what QDate does with surplus characters, for example.
Task-number: QTBUG-14418
Task-number: QTBUG-25387
Change-Id: Ib742fe80686aff3c3770b995678cf838fb4e3bb4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clean up and consolidate different tests in tst_qdatetime.cpp
(that seem to be doing the same thing) into single tests.
Change-Id: Ib6ceb1cb7fb4c6eca672495f96d9cfd907853c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDate::toString(Qt::ISODate) lacks prefixed 0's on years below 1000.
The ISO 8601 standard dictates that this should be the case.
Task-number: QTBUG-16476
Change-Id: I7e73152bba0f5894bcbaa3f4418732b74ce86bc5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Verify that this produces a warning containing the relevant typename.
Change-Id: I046c02585e410a211e9175600b1027dda83bdd9c
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
this cleans up a lot of hacks supporting the build of qt, including the
last bits of $QTDIR.
Change-Id: Id119886ed8097967dad6cf86ebd4e71d90c42841
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The standard streams can be redirected to a file, so don't assume
anything, but try to get the actual size and position from the OS and
from the C library (stdout is usually buffered, so the result of lseek
might be different from ftell).
Change-Id: Ice4a0aa21726671928f56a13cc07cc0e4b52091d
Reviewed-by: Richard J. Moore <rich@kde.org>
I didn't do this earlier since the current test data doesn't contain any SMP code points,
the Unicode 6.2 test data does - so, I can confirm this code really works.
Change-Id: Ieae35e8480a89e22d846fd038e79592fefbbf2ee
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Instead of expanding the scripts table with script values for the code points
>= 0x10000, it has been merged with the properties table in order to
increase perfomance of the script itemization code (not affected yet).
(Stats: the properties table grew up in 97428-89800 = 7628 bytes;
the old scripts table was of size 7680 bytes)
The outdated ScriptsInitial.txt and ScriptsCorrections.txt file has been removed
(they were just empty, the "corrigendum" script corrections should be applied
to Scripts.txt directly, *no customization allowed*!).
More script testcases has been added - at least one per supported script.
Task-number: QTBUG-6530
Change-Id: I40a9e76f681e2dd552fd4c61af0808d043962e79
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This extension doesn't work for e.g. default arguments
in function declarations.
Change-Id: I32b7afa6e01b6af55fb2409179b4fd94cb04cd8d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Completing the work of the previous commit: we don't need separate
classes. Merge into the main class's body.
Change-Id: I2f89b34cb6b7f5f9e8d8b809bebd86656f458644
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This allows a QSharedPointer to be used in contexts where the class in
question is still forward-declared. This produced a warning in Qt 4 due
to the expansion of the template, even if there was no chance of the
pointer being deleted there (because the reference count could not drop
to zero).
Now, not only is the warning removed, but you can actually have the
reference count drop to zero in a forward-declared class and it will
do the right thing. That's because the deleter function is always
recorded from the point of construction and we're sure that it wasn't
forward-declared.
The unit test for forward-declarations had to be rewritten. The
previous version was passing only because the QSharedPointer object
was created under the "tracking pointers" mode, which causes a custom
deleter to be used in all cases.
Task-number: QTBUG-25819
Change-Id: Ife37a4cea4551d94084b49ee03504dd39b8802c1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QSharedPointer doesn't work like the other automatic template metatype
declarations because in some cases T* is declared as a metatype, but we
are interested in QSharedPointer<T> (eg QObject*). In other cases, T is
declared as a metatype and we are interested
in QSharedPointer<T> (eg char).
In particular the macro used before this patch was attempting to get the
metatype id of the element_type using for example qMetaTypeId<QObject>()
instead of qMetaTypeId<QObject*>(), which did not work.
Similarly, the variadic macro driven test is no good, because it was
testing QSharedPointer<QObject*> instead of QSharedPointer<QObject>,
so that is removed.
In the end, the only thing we can sensibly automatically declare as
metatypes are QSharedPointers to QObject derived types. That is also
the type that makes the most sense in a QML context anyway.
Change-Id: I13dd40147e2e6bedf38661f898102abaaaa96208
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Some test functions that only test QDate and QTime were in
tst_qdatetime.cpp. Upon moving these into tst_qdate.cpp and
tst_qtime.cpp, there were already some similar tests so I
consolidated them.
Change-Id: I5f8758bf8b4804ae9d3a482f49d21de9f7a1dc03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Most fixes are simple and quite obvious. The ones more involved are
the ones to QArrayData, which had probably not been compiled with
strict iterators thus far.
Change-Id: Ic4ff84c34fd9a04fd686fecaa98149b1c47c9346
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The QSet<int> is a more expensive container to use and create, so
it should be avoided.
This is source incompatible compared to earlier Qt 5 for
QAbstractItemView subclasses which reimplement dataChanged, but this
patch changes nothing compared to already-present SiC compared
to Qt 4.
Change-Id: Id95391dfd62a0a7f487a8765790b007badefb937
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Containers are auto-registered and use normalized names.
Change-Id: Id65c3940401f69436929220e1f6a971135e147ed
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This already worked, but let's have a test so we can be sure it doesn't
regress.
Change-Id: I358b436d216e3ec4310f05ccf4f70f9e7aad3281
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
* The Line Breaking Algorithm implementation conformance tests has been added;
* The Grapheme, Word, and Sentence Breaking Algorithm implementation
conformance tests has been updated.
Change-Id: Ia1a6eef6272d580964cb23788ddf30dfd5f4a5a3
Note: the Line Break test data contains some extended cases we don't currently support;
just skip them for now.
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Update NormalizationTest.txt data file with one from UCD 6.1;
Add few more QChar::unicodeVersion() testcases;
Add some line break class mapping testcases;
Add some exceptional case mapping testcases;
Add script class mapping test;
Change-Id: I164394984abb2b893c8db62fb77e7bd87aa0850b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
According to ISO 8601 (section 4.2.2.3), seconds can be omitted
from a string representing time.
Task-number: QTBUG-2813
Change-Id: I2578f290845e46a8f49be489f1d7427984ae7f08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
SoftHyphen enum value was added to specify such a boundary reason
Change-Id: I4248909eed6ab8cbca419de4dcf9fe917620a158
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Because QSystemLocale::fallbackLocale() is about UI languages,
it makes sense to check LANGUAGE as well if appropriate.
Adapt tst_qlocale.cpp accordingly.
Suggested by Oswald Buddenhagen.
Change-Id: Ib2c9674081809e3251be4e34456b05210eebc010
Reviewed-by: Oswald Buddenhagen
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
postDelayedEvent() and cancelDelayedEvent() are marked as thread-safe
in the documentation. Unfortunately, they didn't actually work when
called from another thread; they just produced some warnings:
QObject::startTimer: timers cannot be started from another thread
QObject::killTimer: timers cannot be stopped from another thread
As the warnings indicate, the issue was that postDelayedEvent()
(cancelDelayedEvent()) unconditionally called QObject::startTimer()
(stopTimer()), i.e. without considering which thread the function
was called from.
If the function is called from a different thread, the actual
starting/stopping of the associated timer is now done from the
correct thread, by asynchronously calling a private slot on the
state machine.
This also means that the raw timer id can no longer be used as the
id of the delayed event, since a valid event id must be returned
before the timer has started. The state machine now manages those
ids itself (using a QFreeList, just like startTimer() and
killTimer() do), and also keeps a mapping from timer id to event
id once the timer has been started. This is inherently more complex
than before, but at least the API should work as advertised/intended
now.
Task-number: QTBUG-17975
Change-Id: I3a866d01dca23174c8841112af50b87141df0943
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
The function returns mutable iterator on the object that can later be passed to
e.g. erase(), hence it should detach() to be consistent with
QJsonObject::begin() which also detaches.
Change-Id: Id79e8e012fd5469e06b68fbc9eecb7c6848ce9c1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
The use of QWeakPointer for tracking QObject pointers is to be
deprecated.
Change-Id: If460ca7f515db77af24030152f4bd56e1a5fae7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a QTemporaryFile is constructed using a template file path,
the path is generated in QTemporaryFileEngine::open() and then
filePathIsTemplate is set to false. If remove() and then open()
are called on the same QTemporaryFile, the path is not regenerated.
This change ensures that if the file path was generated, it will be
generated again in the scenario above.
Task-number: QTBUG-2557
Change-Id: I718ceb89daa9a9d46fdbe811fecc3d57d6dc08c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently, QString::toFloat() returns 0 (and sets ok to false) if you
try to convert "inf". This is because inf is greater than QT_MAX_FLOAT
and there is currently no check to handle inf.
Task-number: QTBUG-8629
Change-Id: I498daf4a7a6f880f928461fca628fcaf7d1d6d08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The existing tests has been retained, the new ones has been added.
Change-Id: I12ae1b4e63dde46f3b14a7c1423c13d5881d4507
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
ISO 8601 section 4.2.3 states that "The end of one calendar day [24:00]
coincides with [00:00] at the start of the next calendar day", so
fromString() was updated to account for this.
Task-number: QTBUG-25387
Change-Id: I391db0da755dbc822ba0820c302a2c10391e1f3b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation says that started() "is emitted when the state
machine has entered its initial state", but the implementation
didn't adhere to that.
The consequence is that if you e.g. emitted a signal from a slot
connected to started(), and that signal was used by a transition
from the initial state, the signal would effectively get ignored and
the state machine would remain in the initial state.
Task-number: QTBUG-24307
Change-Id: Ibbeb627d517eaff821d88e256a949eacf6aae350
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
A QObject can't be a child of itself, so the comparison always
returned false. In practice, this was causing the entry/exit order
of parallel states to be random.
QObject::children() is documented to contain the children in the
order in which they were added, so this fix actually achieves
deterministic behavior.
Task-number: QTBUG-25959
Change-Id: Id3f12d6bfbc249f1d4fed0bafb7d0217093e458e
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
tryRun() already implies tryLink() and tryCompile(), so there is no
point in executing the stages separately ...
Change-Id: Id7321efaca474e8c5db2bc246ac26323d8a99e58
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Internally, QObject and QMetaObject already leave out non-signal
methods when working with signals. This is possible because the
signals always come before other types of meta-method in the
meta-object data. Ignoring irrelevant methods is faster and can
save memory.
QMetaObject provides internal indexed-based connect() and
disconnect() functions. However, these functions currently take an
absolute method index as the signal specifier, instead of an
absolute _signal_ index. Hence, QMetaObject and friends must convert
from the method index range to the signal index range.
By providing an API that only considers signal indices, clients of
the index-based QMetaObject::connect()/disconnect() can provide the
proper signal index directly. Similarly, for the qtdeclarative
integration (QDeclarativeData hooks) the signal index can be passed
directly. This will eliminate most of the conversions back and forth
between signal index and method index, and some other redundant work
done by qtdeclarative's custom connection implementation.
There are some places where the behavior can't be changed; for
example, QObject::senderSignalIndex() will still need to return an
index in the method range, since that function is public API.
Changing QMetaObject::connect()/disconnect() to take an index in
the signal range will be done in a separate commit; this commit is
only an enabler for porting existing usage of those functions to
the new behavior.
Change-Id: Icb475b6bbdccc74b4e7ee5bf72b944b47159cebd
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Chars that have a case conversion that converts
them into several characters can't be handled
by QChar::toUpper() etc and should get ignored. The code
didn't do that correctly.
Change-Id: I281d122e90bf49187b6449088d2fccef2ef75e86
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Initialiser lists were not tested before in the QVector rewrite, so
the older malloc call was left behind.
Also, std::initializer_list has const iterators returning const data
and broke the build in a few places where const qualifiers were
missing.
Change-Id: I3c04e58361989aa7438621cda63c7df457d7dad8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This autotest appears to be parallel-safe.
Change-Id: I12f9202633941e9339de0709353efb2b41df4fa1
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Previously, the append functions in QConcatenable in the QStringBuilder
dereferenced the data() pointer of the argument QLatin1String without
performing null check.
Change-Id: I629f19fbce3113f1f80f4272fa7ae34e1dbc6bee
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
tst_QStateMachine::postEventFromOtherThread() assumed that 10,000
iterations of the event loop in a separate thread could always be
completed successfully within the default QTRY_COMPARE timeout.
This may be false if the CPU load is already high - such as when running
other tests concurrently.
Decrease the iteration count.
Change-Id: I780523f73c0c16fa0b2ab3201b2b0affdebc198d
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Write to a QTemporaryDir instead of the test's build directory.
Change-Id: Ib65a0d58fbdf8caf8f2cb7002aeed1ce34742183
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test failed a parallel stress test, but seemingly only because it
writes to its own build directory. This should not interfere with other
running autotests.
Change-Id: I27a2f31e32a5b8157ef1082cf0e939bcc0c61c70
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test failed a parallel stress test, but seemingly only because it
writes to its own build directory. This should not interfere with other
running autotests.
Change-Id: I80e548fdb0e915ebe86dcd2205537cb6fee09cff
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This autotest appears to be parallel-safe. It fails our parallel stress
test, but only because it writes to its own build directory. This
should not interfere with other autotests.
Change-Id: Ie99dde24edc0fda0c8ec4352a6e44abb7cbc54f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This autotest seems to be parallel-safe. It was not marked as such due
to an issue which rarely causes the test to hang on exit on Windows, but
that appears unrelated to whether or not the test is run in parallel.
Change-Id: I30bac75be3ddc14139594605481eb6af3f6795e7
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
tst_qprocess::lockupsInStartDetached sometimes locks up on mac.
Mark this as a known issue.
Task-number: QTBUG-25895
Change-Id: I08b1bcf39f2bf373e74509a06415d9ba514b8993
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
MSVC2010 32-bit (with and without service pack 1) takes about 1 hour to
compile this file in some builds, since
1c7421ad14.
Avoid the relevant portion of the code just for these compilers.
Change-Id: Icbb4fa12a6d563a7cdc882c30cdb5705675bedb0
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
When given an invalid url, the output shouldn't be a valid url.
KDE's kurltest detected this regression compared to Qt4, where
all invalid urls were empty in toString() -- but we don't want that,
to give as much feedback as possible to the user.
Change-Id: Ie53e6e1c0a1d4bb9e12b820220dfb7e2f7753959
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests have failed a parallel stress test and may contribute to
instability in test runs.
Change-Id: Ibbbe01f7d9550b953fc9fbd6ed52fc99fdb5f5d7
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
QChar is actually a ushort and passing it via const-ref is suboptimal
Change-Id: Ib806b90397de6a816142ed130a22c0fe10a85d79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This allows the QUrl component getters to return fully decoded data,
like they did in Qt 4. This is necessary for some use-cases where the
component like the user name, password or path are used outside the
context of a URL. In those contexts, the percent-encoded data makes no
sense, and the loss of data of what could be represented in a URL is
acceptable.
Also take the opportunity to expand the documentation of those getter
methods, explaining what the options argument does.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-May/003811.html
Change-Id: I89f743cde78c02f169c88314bff0768714341419
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This allows one to instruct QUrl to ignore the percent-encodings and
interpret the data exactly as provided. This is useful in certain
use-cases where the data comes from a non-URL context.
The strict-mode checking of the components is not implemented
yet. Currently, the behaviour is equal to that of TolerantMode.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-May/003811.html
Change-Id: Ia5abe045a8ce7f9b50cbce3b5a7e3735e068d03a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Since we're about to introduce QUrl::FullyDecoded, this
QUrl::MostDecoded value would be confusing. Replace its uses with what
was intended at the point in question.
Change-Id: Iefd87bc33d37bace507c5cb0f206fa902e08e2df
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This was trying all the possibilities by brute force, but it turns out
that some combinations are not valid so they should not be
tested. What's more, it was using old values of the flags, so this was
actually testing nothing.
Change-Id: I6c2f5230d240fc23418df2d3a1ca905dbc47dd10
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
These tests have failed a parallel stress test and may contribute to
instability in test runs.
Change-Id: I2c4456ad7d3846c2262a0ba714ab8f0c9a05c597
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
A (probable) typo was causing the code dealing with anchors
to use uninitialized values. This used to work by chance, but was
indeed detected by Valgrind f.i. when running tst_qregexp --
the indexIn test on anc11 data reported:
==3015== Conditional jump or move depends on uninitialised value(s)
==3015== at 0x514B4EA: PeppeQt::QRegExpMatchState::testAnchor(int, int, int const*) (qregexp.cpp:1813)
[...]
==3015== Uninitialised value was created by a stack allocation
==3015== at 0x514B3EB: PeppeQt::QRegExpMatchState::testAnchor(int, int, int const*) (qregexp.cpp:1803)
Fixing the code also makes the aforementioned test to succeed.
Change-Id: If7b3e518c1bbfcf12573d2637c33ef2eca27c4d5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QIcon has been moved back from QWidget to QtGui, so the QIcon QVariant
and QMetaType handler can now be moved back to QtGui.
Also we can give back QIcon its old number, allowing to get rid of some
compatibility hack when unstreaming QVariant
Change-Id: I439d5c2987c06ecd619f394407850f678164afb8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The CI system is now using the parallel_test flag to run tests in
parallel. This test has become flaky, or at least more flaky than it
was previously. Mark it to no longer run in parallel.
Change-Id: I47bca3be620a8f648a0eb9c9b9f26d2d925efc01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The parser is recursive and too deeply nested json would
cause it to exhaust the available stack space leading to
crashes.
We now abort parsing with a DeepNesting parse error if the
document is too deeply nested. The current nesting limit
is set to 1024, which should be more then enough for any
real JSON data set.
Change-Id: I4adea3fd727149f7342536d73cf4530361a0a3a1
Reviewed-by: Jamey Hicks <jamey.hicks@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
+ QChar::LastValidCodePoint enum value that supercede the UNICODE_LAST_CODEPOINT macro
replace uses of hardcoded values with the new API; remove leftovers
Change-Id: I1395c9840b85fcb6b08e241b131794a98773c952
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
inline all non-static members to a static ones (declared with QT_FASTCALL),
ushort converts automatically to uint and the conversion cost is minimal.
Task-Number: QTBUG-13052
Change-Id: I189a6f205736766adcd3de2d61cee71f30cc64f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When qt_ntfs_permission_lookup is used, QFile::permissions failed
for files with long filenames.
Also created a test case for this API, which revealed another bug.
Task-number: QTBUG-25629
Change-Id: I73b7676a9d059c0e782b3f701b2e6bbc92f671ed
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
When a file is specified on a path that includes a drive letter
followed by a colon but no slash then it didn't always account
for the fact that this refers to the current path on that drive.
This fixes the problems in completeBaseName(), baseName() and
path(). Tests are also added for these three cases and some
others too.
Task-number: QTBUG-25353
Change-Id: I47a197c6af066f532442ad269be57597ec61303a
Reviewed-by: Irfan Omair <irfan.omair@gmail.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
On some systems prior to this change the code
would not build with the following error reported
by gcc:
error: integer constant is too large for 'long' type
Change-Id: I778bce9a72ccf3a41cdf17883d734082ed3fb4b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Name is about mimetype names, while FileName is about, well, file names.
Task-number: QTBUG-25748
Change-Id: I34a9ac1a5fc06dc3e3855365e19c4dc7a1aa2671
Reviewed-by: Wolf-Michael Bolle <wolf-michael.bolle@nokia.com>
This completes the transition from connectNotify(const char *) and
disconnectNotify(const char *) to the new QMetaMethod-based
functions.
Removed the old connectNotify autotests and renamed the
connectNotifyMethodXXX autotests to connectNotify, since there is
no longer any ambiguity about which overload is being tested.
Change-Id: Icf108a80177155f21bb73c165fb8ab5d4e997bc2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Rafael Roquetto
Stephen Kelly
João Abecasis
Sergio Ahumada
Marc Mutz
Kevin Funk
Giuseppe D'Angelo
Mitch Curtis
David Faure
Thiago Macieira
Thomas McGuire
Kai Koehne
Shawn Rutledge
Kent Hansen
Lars Knoll
Rohan McGovern
Volker Krause
Friedemann Kleint
Laszlo Papp
Oswald Buddenhagen
Jędrzej Nowacki
Jan-Arve Saether
Konstantin Ritt
Kurt Korbatits
Tarja Sundqvist
Janne Anttila
Debao Zhang
Mike FABIAN
Denis Dzyubenko
Chris Adams
Olivier Goffart
Toby Tomkins
Shane Kearns
Andy Shaw
Carl Schumann