OpenSSL has a bug when validating a chain with two certificates.
If a certificate exists twice (which is a valid use case for renewed
CAs), and the first one it hits is expired (which depends on the order
on data structure internal to OpenSSL), it will fail to validate the
chain.
This is only a bandaid fix, which trades improved chain validation
for error reporting accuracy. However given that reissuing of CA certs
is a real problem that is only getting worse, this fix is needed.
See also: https://www.openssl.org/docs/ssl/SSL_CTX_load_verify_locations.html#WARNINGS
[ChangeLog][QtNetwork][QSslSocket] Added a workaround to an OpenSSL problem
that may cause errors when the trust store contains two certificates of the
issuing CA, one of which is expired.
Task-number: QTBUG-38896
Change-Id: I8f17972ac94555648098624e470fff0eff2e7940
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
df757e30f8 may have fixed this for one platform,
but different platforms appear to have different ideas on what constitutes a FD.
Just use the stream operator to avoid having to face this nightmare all the
time.
Change-Id: I298c5a4b31e8a4af6b613d039cb9aee6e8263b5a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Some calls pass len=32, so garbage was shown when maxlen (readBytes) is smaller.
Change-Id: I97e61dcdf5a0db032317c57afb4bfb406437d8d5
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
... and not duplicate part of the logic in the SPDY code. This code was
also existent in QNetworkRequest.
The next step will be to actually respect the header if set via
QNetworkRequest::setRawHeader().
Change-Id: Ifda2658ea826d039c9dad61ed6fa42aaedaee6b6
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without these, a spew of connection warnings will occur when using HTTP
on Qt builds with QT_NO_NETWORKPROXY.
Change-Id: I330f6d98d1abdbadc57768dc48b8fab0ee1f6655
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
This restores behavior for UDP sockets as it was in 5.2.1. Change
13c246ee11 introduced a behavioral
change / regression in that respect.
Task-number: QTBUG-37489
Change-Id: I8f0b26d763dd66ea6edcc343e91ff5c9c7bdc0f2
Reviewed-by: Richard J. Moore <rich@kde.org>
All read calls are now pulled from an intermediate buffer which is
populated from the asynchronous callback (this was a TODO previously, and
was breaking downloads of large requests). As a side-benefit, the use of
only async callbacks ensures fewer first-chance exceptions appear in the
debug output.
Task-number: QTBUG-30196
Change-Id: I5653742d8d94934a4b4a4227298865d20518bc4c
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The declaration of q_SSL_ctrl is ifdefed, so ifdef it's usage too.
Change-Id: I99a53af6f4f24ed991d39ab89f18e03b8f38c617
Reviewed-by: Richard J. Moore <rich@kde.org>
Use QSharedPointer<T>::create(), which co-locates the refcount with the payload
in a single memory allocation, instead of QSharedPointer<T>(new T), which causes
two allocations.
Change-Id: I58196b6390dcc9bd52417e279fd9e000ab9ee9cc
Reviewed-by: Richard J. Moore <rich@kde.org>
Use QSharedPointer<T>::create(), which co-locates the refcount with the payload
in a single memory allocation, instead of QSharedPointer<T>(new T), which causes
two allocations.
Change-Id: I84980e98c4fe9773f12533983937eafa0b0ab250
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Despite supporting DH and ECDH key exchange as a client, Qt did not provide
any default parameters which prevented them being used as a server. A
future change should allow the user to control the parameters used, but
these defaults should be okay for most users.
[ChangeLog][Important Behavior Changes] Support for DH and ECDH key exchange
cipher suites when acting as an SSL server has been made possible. This
change means the you can now implement servers that offer forward-secrecy
using Qt.
Task-number: QTBUG-20666
Change-Id: I469163900e4313da9d2d0c3e1e5e47ef46320b17
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
QDateTime::addSecs() is a const function and returns a new QDateTime with
the given seconds added, thus the current statement had no effect.
Found by applying Q_REQUIRED_RESULT in dev branch.
Change-Id: Id712334f91e0adb40bafc23470bf46479334c81a
Reviewed-by: Richard J. Moore <rich@kde.org>
... and not only one. This was a problem e.g. when there were several
requests to the same host and the host was not reachable; only one
reply would get an error signal in case we suppressed other errors in
"happy eyeballs" host lookup style.
Task-number: QTBUG-36890
Change-Id: I1b5757498bd644b0d773cf6c43e4950620949c5c
Reviewed-by: Richard J. Moore <rich@kde.org>
for more efficient creation of QNonContiguousByteDevices held in shared pointers.
Use the new functions in QNetworkAccessBackend::createUploadByteDevice()
and QNetworkReplyHttpImplPrivate::createUploadByteDevice().
Change-Id: I8a3c76f7c8d5926850303992c77e9382a39a55e8
Reviewed-by: Richard J. Moore <rich@kde.org>
This prevents error reporting from being useless in case an errno value isn't
one we anticipate.
Change-Id: I65f8c2570d07971a06ba3687d75e9df91a0e7611
Reviewed-by: Richard J. Moore <rich@kde.org>
tested manually with internal proxy.
Patch-by: Jonathan Lauvernier <Jonathan.Lauvernier@gmail.com>
Change-Id: Ief5b4579b3444ce70eb99637edf771d37d3971fb
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
... so that the socket notifiers are enabled after selecting and thus
emit signals even after selecting (select() is called e.g. by the
waitFor* methods).
Task-number: QTBUG-36144
Change-Id: I385f288e8c42f92a9c84e53bce843e52f8094ada
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Fanda Vacek <fvacek@blackberry.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Crash occurs after warnings like:
QSslSocket: cannot call unresolved function SSL_get0_next_proto_negotiated
Task-number: QTBUG-37515
Task-number: QTBUG-33208
Change-Id: I18b803e4709b9d5f6b33717c2ac43179676351a4
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
It could be that the channel has its reply already reset to 0, while
the protocol handler thinks the reply is still active, which might
lead to weird behavior including hard to reproduce crashes.
Task-number: QTBUG-37424
Change-Id: I89b65d34caaa546a343edc2ee205aa76425de88f
Reviewed-by: Richard J. Moore <rich@kde.org>
Change-Id: I613a737600f85ef90155e3b8647197b4fd092998
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Change-Id: I7afedbf679ae1c8467eea749e79eb10f2516d039
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Correct the tense of send vs sent in comments and documentation.
Change-Id: I1c5ce9a7b1e49b8b0e8dcfde7d732e4c69acf73a
Reviewed-by: Kurt Pattyn <pattyn.kurt@gmail.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Task-number: QTBUG-37042
Change-Id: I7ddcbc315b4b720e7da7880fc00731c28beb4bb2
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Use QSharedPointer<T>::create(), which co-locates the refcount with the payload
in a single memory allocation, instead of QSharedPointer<T>(new T), which causes
two allocations.
Change-Id: I3f70d15a6d1bfaaa8b48a36ed3c877e817a5b701
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QSharedPointer<T>::create(), which co-locates the refcount with the payload
in a single memory allocation, instead of QSharedPointer<T>(new T), which causes
two allocations.
Change-Id: I280caf861b894f87996a9d3ae783943f55d54ff3
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Change-Id: I213ac1fb2733e675f3641441fe6c621bab06c1f0
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Many bugs originate due to mismatches between the build-time and
run-time versions of openssl but they're hard to debug as we don't
provide access to the build-time info. This addresses that weakness.
[ChangeLog][QtNetwork][QSslSocket] Added accessors for the version
of openssl used at build-time. This will help when debugging
problems caused by a mismatch with the run-time version.
Change-Id: I6a4c21c8f16ab4c90cdf166f38c62fe37bf1f165
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Previously we allowed you to specify which version(s) you wanted to use,
but did not provide access to the version that was actually negotiated.
[ChangeLog][QtNetwork][QSslSocket] Add support for finding the version
of SSL/TLS in use by a connection.
Task-number: QTBUG-28471
Change-Id: I6d50d2bc9f1ce7f98192e67992178fe7e41c0575
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
We should not accept or process messages on closed streams, and unless
we are in a half-closed state (having initiated close ourselves), we
should respond to FIN with a FIN of our own.
This patch means we no longer trigger all the corner case teardown on
common sites that were fixed in earlier patches.
Change-Id: I0d2bab62700a0022a959e66c7053afbad07a9f7e
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
A QNetworkReply may be deleted before it is closed by the protocol.
Since QSpdyProtocolHandler tracks pointers to QNetworkReplies it must
keep track of their destruction as well to avoid links to deleted
objects.
This fixes the last issue with SPDY access of Google Mail in QtWebKit.
Change-Id: I2c56dc080fdcb249b6ed9189fef84cbbc1220cbd
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
We already remove QNetworkReply from most queues, but we also need
to remove it from the SPDY queue. Otherwise we might end up trying
to send an already deleted message.
Change-Id: Ib39bf8f26315b66179755a6f66dbd657576cbbe3
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
We should never upload on a SPDY stream in a closed or half-closed
state. To avoid it we need to stop listening for readyRead on the
upload device, and ignore WINDOW_UPDATE on completed streams.
This fixes SPDY access of facebook.com.
Change-Id: Icad45ffc109b2c14b921f1571e114b70a30f40a9
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Add handling of invalid stream-ids and buffer overflow in header
parsing.
Change-Id: I712af189d72612639d25890a8861a8f4fe084ce3
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
SPDY is currently assuming it will only receive RST_STREAM messages on
active steams. This is however not always a safe assumption.
Task-number: QTBUG-37100
Change-Id: Ied89a68a209891992ad72daa513066efc1d7c421
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
QSharedPointers here are passed by value - good, since it enabled C++11 move semantics,
transparently.
However, when passing such parameters on to assignment operators or other functions,
copies were made where moves would have been sufficient. Thus, add some qMove()s.
Change-Id: Ied1a5edf1bfbb16108dfeefbe85e58ab3d4ef92f
Reviewed-by: Richard J. Moore <rich@kde.org>
SPDY sends multiple header values for the same header key by null-byte
separating them.
This patch maps the multiple values the same way
qnetworkreplyhttpimpl.cpp
does. With this patch applied we can now log on to GMail using SPDY.
Change-Id: I03656ad1695d13b5c3ed252794dc6c89c67c7b97
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
A QSslCipher is not an equivalent representation of a QString, so
the constructor that takes a QString should be explicit.
Change-Id: I4c1329d1eebf91b212616eb5200450c0861d900f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Currently the only supported SPDY version is 3.0.
The feature needs to be enabled explicitly via
QNetworkRequest::SpdyAllowedAttribute. Whether SPDY actually was used
can be determined via QNetworkRequest::SpdyWasUsedAttribute from a
QNetworkReply once it has been started (i.e. after the encrypted()
signal has been received). Whether SPDY can be used will be
determined during the SSL handshake through the TLS NPN extension
(see separate commit).
The following things from SPDY have not been enabled currently:
* server push is not implemented, it has never been seen in the wild;
in that case we just reject a stream pushed by the server, which is
legit.
* settings are not persisted across SPDY sessions. In practice this
means that the server sends a small message upon session start
telling us e.g. the number of concurrent connections.
* SSL client certificates are not supported.
Task-number: QTBUG-18714
[ChangeLog][QtNetwork] Added support for the SPDY protocol (version
3.0).
Change-Id: I81bbe0495c24ed84e9cf8af3a9dbd63ca1e93d0d
Reviewed-by: Richard J. Moore <rich@kde.org>
Modern websites use around 15 hosts on average so the limit of 5 DNS
looks meant that most non-trivial sites have to wait for at least one
unneeded round trip.
Task-number: QTBUG-30866
Change-Id: I584dd46c247e0413b2ed88dd66f111cff08ff987
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented the use of the new QDnsLookup property "nameserver".
On the Linux platform, we can specify both IPv4 and IPv6 addresses
for the nameserver.
On Windows since we are using DnsQuery_W(), which does not have a
way of accepting IPv6 addresses, passing IPv6 nameserver address
is not supported.
On OSX/BSD platforms, specifying IPv6 addresses for nameserver
require access to the __res_state_ext structure which is in a
private header of libresolv (this header is different for BSDs and
OSX). If this feature has to be enabled in the future, we have to
figure out a way to access this struct by either accessing the
private header or by specifying one of our own. Currently, I'm
disabling it till such a solution is arrived at.
Nameserver support on different platforms:
Platform | IPv4 | IPv6
-------------+---------------+---------------
Linux/X11 | supported | supported
-------------+---------------+---------------
Windows | supported | not supported
-------------+---------------+---------------
OSX | supported | not supported
-------------+---------------+---------------
WinRT | not supported | not supported
-------------+---------------+---------------
Others | supported | not supported
| (not tested) |
-------------+---------------+---------------
Task-number: QTBUG-30166
Change-Id: Iedbddf15b9a62738ce4c2cfa0fce051514d64766
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added basic functionality to socket for WinRT. Even though not
all auto tests pass yet, this patch can be seen as a foundation
for upcoming work in this area. Reading from and writing to TCP
socket works and one can listen for tcp connections.
Change-Id: Id4c25ba1c7187ed92b6368c785c4f62837faded7
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
... to defer the decision which protocol will be used on a specific
channel. This is to allow using the SPDY protocol instead of HTTP (to
be implemented in a later commit); which protocol will be used can
only be decided after the SSL handshake.
Change-Id: I6b538320668fe4994438f0095ecdc445677cf0a6
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
... from the private to the public class, because we need to access
these methods from other classes.
Change-Id: I2c5ea84e0f5d3641c1dc02342348f1022d886249
Reviewed-by: Richard J. Moore <rich@kde.org>
These functions now return a QStringList to reflect the possibility of
there being more than one entry of a given type, but the documentation
did not reflect this.
Task-Number: QTBUG-36304
Change-Id: Iba2eda5e2c3174c8dcea640b5aed9cdc9a432392
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
... which is needed to negotiate the SPDY protocol.
[ChangeLog][QtNetwork][QSslConfiguration] Added support for the Next
Protocol Negotiation (NPN) TLS extension.
Task-number: QTBUG-33208
Change-Id: I3c945f9b7e2d2ffb0814bfdd3e87de1dae6c20ef
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
This bug causes that Cascades QML application cannot open more than
system ulimit defined number of different asset:///*.qml files.
The realFile is ordinary closed in the ~QNetworkReplyFileImpl(),
the QDeclarativeTypeLoader::::networkReplyFinished() calls
reply->deleteLater(). There are tricky situations when event-loop is
not entered and too many read already files are waiting for close.
This patch close() file when all the data is read. It can be done
this way since the QNetworkReplyFileImplnetworkreply is a sequential
device.
For more info, please, read comments on QTBUG-36032
Task-number: QTBUG-36032
Change-Id: I4002f21b4b0c7350af48b0dc6530d9606fd2794b
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
The overload used an evil hack to work around a flaw in the QSslCipher
API rather than fixing the API. The hack was broken by the addition of
support for newer versions of TLS. This change solves the issue properly
by fixing the QSslCipher API then using the fixed version.
Task-Number: QTBUG-34688
Change-Id: Ibf677c374f837f705395741e730d40d8f912d7c6
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
A few more HTTP status codes from the 4xx and 5xx series have been
added to QNetworkReply::NetworkError.
For content errors, the following codes have been added:
1. 409 - Resource Conflict
2. 410 - Resource Gone
For server related errors, the following codes have been added:
1. 500 - Internal Server Error
2. 501 - Operation Not Implemented
3. 503 - Service Unavailable
Few of the above codes are quite possible when communicating with REST
based services.
NOTE:
=====
* HTTP error status 400 is interpreted as
QNetworkReply::ProtocolInvalidOperationError.
* QNetworkReply::UnknownServerError is returned for all server related
errors (5xx) not listed above.
[ChangeLog][QtNetwork][QNetworkReply] Added more (specific) HTTP status
codes to NetworkError enum.
Task-number: QTBUG-30880
Change-Id: I9d2a133f6b3869f26710c6eb930dd8b08df31108
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
When the caches is deleted, the open files are deleted without closing action.
The file descriptor is remaining until the process is terminated.
Change-Id: If85519d173d05548ddf3273c85800441887199e2
Reviewed-by: jungo kim <jungo.kim@lge.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Meego/Haramttan is no more and QtMobility only works for Qt 4.x anyway.
Change-Id: I3840358011f9d0e14de4d0ce9de15bba546964c5
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Otherwise we would get
qabstractsocket.cpp:2224:24: error: unknown escape sequence: '\c' [-Werror]
Change-Id: I757ff2aa1c46bbba7f0c0b93f49c2f9d84927b19
Reviewed-by: Richard J. Moore <rich@kde.org>
Any cipher that is < 128 bits is excluded from the default SSL
configuration. These ciphers are still included in the list
of availableCiphers() and can be used by applications if required.
Calling QSslSocket::setDefaultCiphers(QSslSocket::availableCiphers())
will restore the old behavior.
Note that in doing so I spotted that calling defaultCiphers() before
doing other actions with SSL had an existing bug that I've addressed
as part of the change.
[ChangeLog][Important Behavior Changes] The default set of
ciphers used by QSslSocket has been changed to exclude ciphers that are
using key lengths smaller than 128 bits. These ciphers are still available
and can be enabled by applications if required.
Change-Id: If2241dda67b624e5febf788efa1369f38c6b1dba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt since approximately 4.4 has set the verify callback on both the SSL
store and the SSL context. Only the latter is actually needed. This is
normally not a problem, but openssl prior to 1.0.2 uses the verify
code to find the intermediate certificates for any local certificate
that has been set which can lead to verification errors for the local
certificate to be emitted.
Task-number: QTBUG-33228
Task-number: QTBUG-7200
Task-number: QTBUG-24234
Change-Id: Ie4115e7f7faa1267ea9b807c01b1ed6604c4a16c
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added calls to clear the write and read buffers when
- setSocketDescriptor is called
- abort is called
Removed clears the read and write buffers from
the documentation of resetSocketLayer.
Added documentation to setSocketDescriptor
describing that read and write buffers are cleared.
Task-number: QTBUG-28914
Change-Id: I25a4b679708bdea0b259c50f1d10a3e9271dabb9
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added functionality to set SO_SNDBUF and SO_RCVBUF
socket options on QAbstractSocket.
Task-number: QTBUG-34934
Change-Id: I2134fb462d43b9111c039cd7e7d36bd78eafd8bc
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
In a slot connected to readyRead, if the app detects that the
buffer size is too small and increases it, it expects that
readyRead() will be emitted again.
setReadBufferSize() doesn't re-enable the socket notifier when
calling from within readyRead, and readyRead itself was missing
the code to do it.
Change-Id: Ia00a3066ad3ba09d5cfae0716adc5691ae96c3fa
Done-with: Thiago
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For IPv6 addresses don't call toAce as it returns the empty string.
We should reflect the behavior of browsers here, which all accept
cookies from IPv6 addresses.
Original-patch-by: David Tapuska <dtapuska@blackberry.com>
Task-number: QTBUG-35022
Change-Id: Ic00369e923d044ec459822b2405865c13e4185b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
If the domain is an IP address, we should not do any magic regarding
leading dots etc.
Task-number: QTBUG-35022
Change-Id: I7722de4e6027666dde27e9e37b6353e3da775d94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
... because it was used to operate a man-in-the-middle proxy.
Task-number: QTBUG-35474
Change-Id: Ic7f19708b278b866e4f06533cbd84e0ff43357e9
Reviewed-by: Richard J. Moore <rich@kde.org>
While QHostInfo and QNetworkInterface are implemented,
socket implementation is just a stub for now. Having
stub implementation is preferable over not having them
at all is because most applications will not build, if
sockets are not available. Even though they do not
do anything useful yet, applications can be compiled
and run to get an idea how network will work on WinRT.
Change-Id: I78ea88901a30280d4098b75ef7398c2628dd19c8
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
The ip address should be set before the netmask. The reason for this is
that QNetworkAddressEntry::setNetmask() compares the protocol of the
netmask and the ip, if they don't match the netmask won't be set.
Task-number: QTBUG-33911
Change-Id: Ic344b3653c5dfdc5df912dee16e4dbe069d57d24
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
to reflect the fact that this returns and sets the whole session
ticket, and not just the session ID.
Change-Id: I00fe2bc4197dbcd7a02b3ae4f2f84e3a2a7edad0
Reviewed-by: Richard J. Moore <rich@kde.org>
Add support for QNetworkAccessManager https REST on
iOS, without adding a dependency on OpenSSL.
The current limitations are:
- Overriding server certificate trust issues (for
example expired certificates) is not supported.
- Usage on non-gui threads is not supported.
NSurlConnection needs a CoreFoundation-based event
loop, which Qt currently only provides when using
QGuiApplication on the main thread.
Change-Id: Ic6f74591d40c3b2248ab81db12647e432377cd4f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
In 5.2, the HTML output is in a flatter structure and when they are
hosted in qt-project.org/doc, the documentation will be found at
http://qt-project.org/doc/qt-$QT_VER
The url variable is used by projects outside of Qt 5 which need
to link to Qt 5 documentation, such as Qt Creator.
Task-number: QTBUG-34584
Change-Id: Ifa55fcd9e402b0e184a41e316340e46aeb7101de
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
"windows" only worked more or less by accident (it's the opposite of
"console" and just happens to be the default on windows).
Change-Id: Ib60c8ae5aea04f28207c05cc0005183dd6eb6244
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch makes it so even sub processes of services are also
detected to be running in the context of a service. With the previous
code it would only detect that the current process is a service
and not the sub processes.
This fix makes sure we detect properly if the current process
is running in the context of a service. This is important to
detect properly the proxy configuration of the current user.
Change-Id: I110dee62597aec3f8e2f6925166a428f72d14fd0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Daniel Molkentin
Robin Burchell
Frederik Gladhorn
David Faure
Peter Hartmann
Andrew Knight
Jani Heikkinen
Sérgio Martins
Marc Mutz
Richard J. Moore
Friedemann Kleint
Joerg Bornemann
David Fries
Morten Johan Sørvig
Sergio Ahumada
Kurt Pattyn
Allan Sandfeld Jensen
Simon Hausmann
Andy Shaw
Mandeep Sandhu
Oliver Wolff
Konstantin Ritt
Frantisek Vacek
Jungo Kim
Alex Blasche
Jorgen Lind
Oswald Buddenhagen
Nico Vertriest
Christian Strømme
Jerome Pasion
Thierry Bastian