QItemSelectionModelPrivate::initModel() uses string based connections,
to connect/disconnet its QAbstractItemModel.
The QObject::destroyed signal is connected to modelDestroyed(), which
does not disconnect other signals.
QQuickTableView's selection model binds to its QAbstractItemModel.
The binding also reacts to QObject::destroyed
Eventually, QItemSelectionModel::setModel(nullptr) is called.
At this point, only a QOBject is left from the QAbstractItemModel.
That leads to warnings about disconnecting string based signals, which
belong to QAbstractItemModel.
This patch changes the connect syntax to the QObjectPrivate::connect
API. Instead of keeping a list of string based connections around, the
connections themselves are kept in a list member. Disconnecting happens
based on that list.
Connections are also disconnected in
QAbstractItemModelPrivate::modelDestroyed.
An auto test is added in tst_QItemSelectionModel.
Fixes: QTBUG-116056
Pick-to: 6.6 6.5 6.2
Change-Id: I57e5c0f0a574f154eb312a282003774dd0613dd6
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
sqlite3_filename was indroduced with SQlite 3.40.0 so we have to define
it by our own for older versions.
Task-number: QTBUG-107120
Fixes: QTBUG-116572
Change-Id: I3186e58c3538135dc01a1be9cc54621699d1cec1
Reviewed-by: Liang Qi <liang.qi@qt.io>
Won't make a difference in codegen, but it's the right thing to do.
Pick-to: 6.6
Change-Id: Ifa1111900d6945ea8e05fffd177dc8d200c2368f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
These features are now only used for qnetworkinterface_unix.cpp, so they
aren't needed for Windows or for Linux with AF_NETLINK support. This
commit removes the last couple of placess outside of that file where
they were used (the qnativesocketengine_unix.cpp code looked stale
anyway).
These tests cost us approximately 1300 ms during CMake time. This commit
does not change that because the tests are checked even if the condition
has already been forced OFF by previous conditions.
[ChangeLog][Build system] The QT_NO_GETIFADDRS and QT_NO_IPV6IFNAME
macros are deprecated. On a standard Linux build, they will be defined
to 1, even if the system does support getifaddrs() and ifnametoindex().
Task-number: QTBUG-107248
Task-number: QTBUG-115705
Change-Id: Ifbf974a4d10745b099b1fffd17775822a1a6e55f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Initially, DH functions were deprecated, but when OpenSSL v3 was released,
they changed their mind (now they changed it again). OpenSSL must
be configured with 'no-deprecated'.
Pick-to: 6.6 6.5 6.2
Fixes: QTBUG-83733
Change-Id: I69f14929e91f5fc147f9297f6fff20674e81b6f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QString::fromJsString -> QString::fromEcmaString()
QString::toJsString() -> QString::toEcmaString()
For API naming compatibility with QByteArray::fromEcmaUin8Array()
Pick-to: 6.6
Change-Id: If6e2121e31e630d6728ed24e41d14b763f395aaa
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
When QWindowsUiaTextProvider::RangeFromPoint was
called with a point that is not over any
character, it was previously returning S_OK
and a nullptr for the text range.
This is contrary to what the
ITextProvider::RangeFromPoint documentation [1]
says:
> If this method succeeds, it returns S_OK.
> Otherwise, it returns an HRESULT error code.
and
> The property never returns NULL.
Therefore, setting pRetVal to NULL and returning
S_OK at the same time is problematic.
Return UIA_E_ELEMENTNOTAVAILABLE instead for that
case, and only return S_OK when actually
setting a valid text range provider as well.
Ideally, this should return an empty range for
the character that is closest to the given point.
That one could be identified by iterating over all
characters and calculating their distance to the
given point, but that would be too expensive.
[1] https://learn.microsoft.com/en-us/windows/win32/api/uiautomationcore/nf-uiautomationcore-itextprovider-rangefrompoint
Fixes: QTBUG-115801
Pick-to: 6.6 6.5
Change-Id: Ib08d02677935a45517c937613785f1e3f53ee032
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
at-spi2-core commit [1]
commit ed16f50e4930e32c29f80552eb698baa35b4677e
Author: Fushan Wen <qydwhotmail@gmail.com>
Date: Thu Jul 21 21:49:32 2022 +0800
Add `ATK_ROLE_PUSH_BUTTON_MENU`
This role allows to specify a button will open a menu. It's widely used
in Hamburger buttons, and Qt has QAccessible:ButtonMenu role for it.
added a new ATSPI_ROLE_PUSH_BUTTON_MENU role to AT-SPI,
so map to that from QAccessible::ButtonMenu when building
against a recent enough AT-SPI version.
Note that only a follow-up fix [2] for the above-mentioned
at-spi2-core commit increased ATSPI_ROLE_COUNT accordingly:
commit b0a062fd02c0cef5cc73b67aae282216856b8d8a
Author: Michael Weghorn <m.weghorn@posteo.de>
Date: Thu Jul 13 14:15:33 2023 +0200
Increase ATSPI_ROLE_COUNT after ed16f50e4
commit ed16f50e4930e32c29f80552eb698baa35b4677e
Date: Thu Jul 21 21:49:32 2022 +0800
Add `ATK_ROLE_PUSH_BUTTON_MENU`
added a new role, so increase the role count
accordingly.
[1] ed16f50e49
[2] b0a062fd02
Change-Id: If7082c7478c95c6cc68d1c735de47933599f8d2b
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Take a copy as the loop may end up calling QCoreApplication::postEvent()
which in turn could invoke unknown code that results in modifying the
QHash that is being iterated over.
Task-number: QTBUG-115803
Change-Id: I5f8aabb13ef7f60b470d0d3a986063775e787036
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The container is childWindows in all cases:
- place(): queries the windows' geometries
- setChildActivationEnabled(): sets a bool member in subwindow->d
- subWindowList(): {pre,ap}pends windows pointers to a separate QList
Pick-to: 6.6 6.5
Task-number: QTBUG-115803
Change-Id: I0fdd5f22f29f085b71bf46f68bf9ec04c45c9317
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Take a copy of the member container as the loop may modify the container
(either by moving/reordering the Rearranger elements or by appending).
Pick-to: 6.6 6.5
Task-number: QTBUG-115803
Change-Id: Iaf891b29e9c7cdfdb3dc82e03ed94defb8d0cf4c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QWidget already handles this, but it might be useful for non-Widget
object hierarchies as well, such as in Qt Quick.
The flag is opt in, and as QWidget already handles these events by
itself (without checking any flags), we assert that we don't end up
in this code path, instead of enabling it for QWidget. The latter
would mean refactoring the QWidget code, with possible regressions.
Docs and header comments have been updated to reflect that this
event is not widget specific. (This is an issue with other events
as well, that are documented to say "widget", since they came
from a time when there was only QWidget, but nowadays apply to
e.g. QWindow as well. That's something for another fix though).
Change-Id: Ib71962131d6011c17dcce8c01bd8adcdaa58d798
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
There doesn't seem to be reason for it to exist, and apparently it
causes compilation failures with icc.
Pick-to: 6.6 6.5 5.15
Fixes: QTBUG-116517
Initial-patch-by: Yorick Bosman
Change-Id: Ic2ed1d4318d522851278afa7f9791441af4fa709
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It was introduced in 4368179c37
Use QBAV to trim operation and then make QBA
Change-Id: I578305e5b5254c66052d8a11815aaa7209e629bb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I thought it went without saying...
Fixes: QTBUG-116218
Pick-to: 6.6
Change-Id: I964c2b1e6b834feb9710fffd177c8338f8f1e618
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
This also removes the configure option and therefore makes the feature
not disable-able. Saves 350 ms of CMake time.
Change-Id: Ifbf974a4d10745b099b1fffd17775528767595d4
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Instead of a manual loop, which was there since at least Qt 4.5.1
(beginning of the public history).
Pick-to: 6.5 6.6
Change-Id: Ifa1111900d6945ea8e05fffd177dd3dfea450a67
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Commit 3ad9f94ff2 (Feb 2023) moved it to
qvariant_p.h but commit 79ae79d05c
(authored Sep 2022 but committed June 2023) brought it back, probably by
accident due to conflict resolution during rebasing.
For some reason, no compiler in our CI complains about it, but ICX 2023
(based on unrelased Clang versions) did:
variant_p.h(101,23): error: call to 'customConstructShared' is ambiguous
Pick-to: 6.6
Fixes: QTBUG-116496
Change-Id: Ifa1111900d6945ea8e05fffd177eab656a2dc507
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
If some header files were moved to another module within same repo it
makes sense to allow deprecating them. 'syncqt' now is able to detect
this kind of header files if the 'foreign' module is specified in
qt_deprecates pragma as part of the deprecated header name.
Pick-to: 6.5 6.6
Task-number: QTBUG-116483
Change-Id: I479ea60e71de112b67c281722600cd818aac7762
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit f4d6d04898.
Reason for revert: EDID serial numbers can be shared across monitors, so the move to EDID serial number for screen index detection does not work as intended,and breaks monitor detection.
Fixes: QTBUG-116499
Pick-to: 6.6 6.5
Change-Id: I6995b21788eb632e38eeef3a93492dbe0740da4a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Adds zstd support for CTF streaming. The client can select which
compression scheme to use in the trace request.
Change-Id: I21423eda2c8223fd5d23eb5adaf216eb61a25501
Reviewed-by: Hatem ElKharashy <hatem.elkharashy@qt.io>
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Check for the index of last '/' from the non-encoded path.
Amends ea75e34d69.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I3ef5d454a46c711a85fe7ef01ea9d3d93a2d574f
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The QTextFormat description refers to setDirection() but this function
does not exist. The correct function name is setLayoutDirection() even
in Qt4.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I2d1f49fba558874b5875d8d93ef61d6208134609
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use QMetaObject::invokeMethod() to schedule call to
QDBusConnectionPrivate::_q_newConnectioni() instead.
This also gets rid of a by name signal/slot connection.
Change-Id: I8725c4e3815c5580c5561bdddda0ab722b06346e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use connection to a lambda instead. This makes
QDBusPendingCallWatcherPrivate obsolete and it is also removed.
Change-Id: I3d80ff2da25609c694322e5fef4231600ba346b4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This involves reimplementing QWidgetPrivate::grabFramebuffer().
Widgets call this function whenever a texture-based widget is
encountered.
This implies however that we rename QRhiWidget's own, lightweight
grab function, grab(), because it kind of shadows QWidget's grab().
Switch back to grabFramebuffer() which is what QQuickWidget and
QOpenGLWidget both use.
Supporting QWidget::grab() is particularly important when grabbing
an ancestor of the QRhiWidget, because that has no alternative.
Right now, due to not reimplementing the QWidgetPrivate function,
the place of the QRhiWidget is left empty.
In addition, grabFramebuffer() is now const. This is consistent
with QQuickWidget, but not with QOpenGLWidget and QOpenGLWindow.
Change-Id: I646bd920dab7ba50415dd7ee6b63a209f5673e8f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
These examples have been removed as part of the examples revamp project.
Pick-to: 6.6 6.5
Change-Id: I2a8237334a2acae2735c2dbd86004048d288896a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Unconditionally append separator and then chop last one
Change-Id: I33d004df07ce0c3c0076dc374ae7a2f8c413aeba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
localStorage is unavailable on workers. Operations will now get proxied
to the main thread instead.
This - among other benefits - makes tst_QSettings::testThreadSafety
pass.
Task-number: QTBUG-115509
Change-Id: Iebbe5e9f9069948f8728e0a82628cc082b30de12
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
There is no point in using the more specialized derived class
(QRhiTextureRenderTarget), even though that is what the rt always is.
None of the example and test code needs changes since relying on
QRhiTextureRenderTarget specifics is very rare in practice (now it will
need a static_cast), whereas in the majority of cases the return value
is passed on to other functions, for example, beginPass(), that take
a QRhiRenderTarget.
Change-Id: Ifaebb6320a156ec6a9013e72fede04e520aa9aaf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The latest version of gradle was released on August 17, 2023
This update ignores most of the changes to gradle.properties file,
as we do not really use most of the variables which are set by the
upstream release.
Task-number: QTBUG-116236
Pick-to: 6.6
Change-Id: If66e1a264328b772e742473b859ed9240f77b9c6
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
For parity with Metal. VK_COLOR_SPACE_DISPLAY_P3_LINEAR_EXT is
mapped to kCGColorSpaceExtendedLinearDisplayP3 by MoltenVK.
Change-Id: Idba4ed56c029c1dea166e278ec6fc3f41e5ac471
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Instead of passing around the QRhiSwapChain, pass the objects queried
from it. There is no point in tying the helper code to a swapchain
when all that can function with other (texture-based) render targets as
well.
Change-Id: I0b14853f537c2d641eb67815c10edfe72e958fdf
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
qaccessible.h and qplatformaccessibility.h are supposed to always be
installed as public headers, regardless of QT_FEATURE_accessibility.
Their contents are wrapped in "#if QT_CONFIG(accessibility)", so
installing them even if QT_FEATURE_accessibility is not enabled
shouldn't be an issue.
The warning was about uncoditionally installed header files,
"CONDITION_INDEPENDENT_SOURCES", being in a
"qt_internal_extend_target(Gui CONDITION QT_FEATURE_accessibility"
call. Thanks to Alexandru for confirming my vague suspicions about the
issue in the bug report.
This amends commit 9f36ab1f8d.
Task-number: QTBUG-111785
Pick-to: 6.6
Change-Id: I5e5950f341d6729e15961d6fb3d3f8fe85007e38
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
to save allocations, and use tokenize to avoid temp container
Change-Id: I2a43612b9d15538a93d4afd2c544714507141f0f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In QHttpNetworkRequest and QHttpNetworkReply this method is used with const char* literals, so no need to create QByteArray
Change-Id: Ifef7cb23aa434577455625077ef1adaab085c8ae
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This makes the code slightly more readable.
Rename one overload of QDBusConnectionManager::doConnectToBus to
avoid using qOverload.
Change-Id: Id878e5baade539c3f748b5bf66a5aff726604b89
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Neither C++ nor modern C allow omitting the type (which used to be
equivalent to an "int" return type).
moc should not try to parse functions in C code, as they cannot be
meta-methods. So there is no point in supporting it.
Change-Id: I2b3a492988f29e8139311db64be110581cc1a4de
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I've left the QT_NO_ macros because they were public. No one should be
using them (and they are now 1 on Linux, so you had better not be using
them), but just in case.
Change-Id: Ifbf974a4d10745b099b1fffd177758a7a26e4244
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Create QBA only when it's needed
While touching code, use std::move more
Change-Id: I5f014822a47d41fa1fca46a85a7921c70d1d9a55
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This unifies the approach to running sync tasks (possibly with a
return value) on the main thread.
Change-Id: I2a05c4f40115a79dbf03c03fa8d8db34124884dc
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
File filter was not properly processed when using LocalFileAPI.
The QtFormat->AcceptList conversion was happening twice, resulting
in erronous types. This prevented dialog from appearing on Chrome.
Additionally remove unused debug code.
Fixes: QTBUG-115087
Pick-to: 6.5 6.6
Change-Id: Ie6770e2f1d2aa7c3ad19f9ab105dbec8102d45fc
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Since the native file dialog doesn't allow changing the name filters
after it's been opened, another way to ensure that we comply with
the provided nameFilters list is to provide them all at once.
[ChangeLog][Android][FileDialog] use all nameFilters at once since
Android file picker can't change nameFilters after being opened.
Pick-to: 6.6
Change-Id: I389feecae190af41b87c7f2070494bd57eec4b69
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
Calling this function before we had a QGuiApplication instance, would
return an empty string, even if QT_QPA_DEFAULT_PLATFORM_NAME was defined
at compile time. We now return the default platform name
[ChangeLog][QtGui][QGuiApplication] QGuiApplication::platformName
now reports the default platform name if QGuiApplication hasn't been
instantiated yet. It used to return an empty string.
Pick-to: 6.6 6.5
Change-Id: Iffe7cde8943ed2d186bc494d0920b9cf79389dd0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As part of creating the QML binding, add
Q_CLASSINFO("RegisterEnumClassesUnscoped", "false")
to QNetworkInformation.
Task-number: QTBUG-113813
Change-Id: Ib5d3b2356986c565b9786bc2d925cc4199bae6c9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The old name misleadingly identifies it as the Greek letter on which
it is based (and to which it case-folds); but U+00B5 is MICRO SIGN,
not the Greek letter mu, and pretending it is the latter only leads to
confusion.
Retain the old name as an alias to the new, prepare to deprecate it
from 6.11 and change all uses of it to the new name.
[ChangeLog][QtCore][Qt::Key] Qt::Key_mu is now renamed Key_micro,
since it is, in fact, the micro sign, not the Greek letter mu. The old
name is retained as an alias for the time being.
Change-Id: I4deb905f5e59b906710bd092c05a2c0a9b6bba65
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Replace if-block with early return on null QWindow.
Pick-to: 6.6
Task-number: QTBUG-116232
Change-Id: Iaf402edfd9b03734b64fdf707834fa92c827a1dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use QObjectPrivate::connect() instead of SLOT/SIGNAL based connection.
Remove _q_ prefix and private slot declaration.
Change-Id: I4f91d6f7155d7578c5d2d31a18865a00ebb8d13b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Use QObjectPrivate::connect() instead of SLOT/SIGNAL based connection.
Remove _q_ prefix and private slot declaration.
Change-Id: If6882b7cbd723b441f865f1a8de47466964077e7
Reviewed-by: David Faure <david.faure@kdab.com>
They do the same work in determining the way to call the callable
but with slightly different preconditions.
Let's just re-use it.
Change-Id: Ie2ad54a49250ae8460d8f364f7ea01b651648034
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This was missing for a while, and there is nothing fundamentally
missing for it to work.
With the more recent work around slot objects and invokeMethod in
general, it is a good time to add support for this.
In this patch, when connecting to a functor, it automatically deduces
the overload to call based on the arguments passed to invokeMethod.
Sharing code with QObject::connect could be done, but they have a
key difference that makes it harder:
With signal emissions we throw away trailing arguments that are not
used: i.e. `signal(int, int)` can be connected to `slot(int)` or
`slot()`. With invokeMethod that's not a thing. So we will need a way
to toggle that behavior during resolution.
[ChangeLog][QtCore][QMetaObject] Added support for passing parameters
to the overload of QMetaObject::invokeMethod that takes a functor. These
new overloads must have the return-value passed through qReturnArg().
Change-Id: If4fcbb75515b19e72fab80115c109efa37e6626e
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This way we can make check verify that the passed-in pointer is correct
at compile time.
Doesn't do this in this patch because all current uses are in the
string-based overloads, but we'll use it in a later patch which adds
new invokeMethod overloads for the functor-based API.
Change-Id: I30186adc9d0b67c7ca337deb35c2c34661e50261
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because the real handle is also the size of a pointer,
not int
Change-Id: Ic2efdd56a5deffe9bd130ce02e549efd68d6a337
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Also declare the type as shared using Q_DECLARE_SHARED
Found during Qt 6.6 API review.
This commit amends 46e909a37a.
[ChangeLog][QtSql] QSqlIndex is now a relocatable type.
Pick-to: 6.6
Change-Id: I78394cba082b4df2e4d8a6aab8e8e87f2340962c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QSqlField and QSqlRecord implemented all special member functions and
the member swap() function, but were missing the Q_DECLARE_SHARED
macro.
Found during Qt 6.6 API review
[ChangeLog][QtSql] QSqlField and QSqlRecord are now relocatable
types.
Pick-to: 6.6
Change-Id: Ia10f1d3fd9f634864be5b36d1d3903301adfa9ab
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
bbb71e7e80 added an eventFilter override
to QDialogButtonBox, in order to fix QTBUG-114377. The approach added
a symbol to QDialogButtonBox, which breaks binary compatibility between
patch releases.
=> Use a separate class to install an event filter
=> Remove the symbol (eventFilter override) in QDialogButtonBox
Fixes: QTBUG-116287
Pick-to: 6.6 6.5
Change-Id: I920deca9f45f6246ed1fcbf5346f681dd5dd12f6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When a QWindow is moved between being a child window and a top level,
it gains a corresponding QNSWindow, which we create as part of
QCocoaWindow::createNSWindow(). NSWindows are not visible by default,
so we need to re-apply the QWindow state to the newly created window,
just like we do for other QWindow properties.
Pick-to: 6.6
Change-Id: I809d12b09eeccea7a4ee4e8444f69db46dbd159e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
to save some allocations. In qhttpnetworkreply.cpp methods are used with const char* literals, so no need to create QByteArray
Change-Id: I94c2eca1a5c6ab73d4133d87fee007af8cb65ea1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Qt::TimerType is not a faithful representation of a QDeadlineTimer.
It's missing the actual deadline, and so should not be allowed to
participate in implicit conversions.
Consider whether you'd like to see such code:
foo.setTimeout(Qt::PreciseTimer); // HU???
So split the old (TimerType = CoarseTimer) ctor into an explicit
default ctor (applying NSDMI to make it =default'able) and a new
explicit (TimerType) ctor.
[ChangeLog][Potentially Source-Incompatible Changes][QtCore] The
QDeadlineTimer(Qt::TimerType) constructor is no longer implicit. To
keep old source working, wrap the Qt::TimerType argument in
QDeadlineTimer{}. This is backwards-compatible with older Qt versions.
[ChangeLog][QtCore][QDeadlineTimer] The (Qt::TimerType) constructor is
now explicit (was: implicit).
Found in API-review.
Pick-to: 6.6
Change-Id: I72aaaad5201bd288a6fd6af398573aaa9d0eda5a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The function has a precondition, namely that [bytes, 16) be a valid
range. Therefore it cannot be noexcept.
Found in API review.
Pick-to: 6.6
Change-Id: Idcc61cdc3b1cbffc20a86b0dbc4eb17e51c1becd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Make sure that MacOSSonoma symbol is defined in
qoperatingsystemversion.cpp, instead of duplicating the
MacOSVentura symbol. This seems strictly speaking not
needed (as this shouldn't have compiled otherwise), but is
avoiding confusion in the future.
Also document when it got added (Qt 6.5).
Amends 0237709e2.
Pick-to: 6.5 6.6
Change-Id: Idff7cbe0b5862907d735fb60f91f85469cb1edf0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QStringView already did since 6.0. I don't know how we missed this.
Pick-to: 6.5 6.6
Change-Id: I5acc02341c5940499682fffd1774f7c3a807317a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
while touching code, use inline string, since there is only one user
Change-Id: I6e89c24d8a37da090203e6eaf690d9094c5aa76a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The was introduced with the rewrite of QMetaObject::invokeMethod() in
commit 0f76e55bc4, because we have an
optimization for zero timers to avoid creating a temporary
QSingleShotTimer object. The old implementation did attempt to normalize
the target slot name, but did so because it looked metamethods up using
QMetaObject::indexOfMethod:
int idx = meta->indexOfMethod(sig.constData());
if (idx < 0) {
QByteArray norm =
QMetaObject::normalizedSignature(sig.constData());
idx = meta->indexOfMethod(norm.constData());
}
The new implementation does not use this method so it didn't need to
attempt to normalize.
I am fixing this only in QTimer and not in QMetaObject::invokeMethodImpl
(even though it is trivial to do so) because I don't believe spaces in a
pure string to invokeMethod were ever expected to work:
QMetaObject::invokeMethod(obj, "slotName ", Qt::QueuedConnection);
The Q_ARG and Q_RETURN_ARG (for code not recompiled) still does
normalization inside QMetaType::fromName().
Fixes: QTBUG-116060
Pick-to: 6.5 6.6
Change-Id: I964c2b1e6b834feb9710fffd177cac60c83ef413
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If qt is first configured without -developer-build, and then
reconfigured with -developer-build, QT_FEATURE_developer_build will be
ON but QT_FEATURE_private_tests remains OFF, and is not reset to ON.
This causes a link failure in Network, because the source files
defining the QNetworkAccessDebugPipeBackendFactory class are only
added if QT_FEATURE_private_tests is ON, which is not the case above,
but the C++ code checks for the QT_INTERNAL_BUILD define which is
defined when -developer-build is ON.
Align the C++ code to check for the private_tests feature.
Pick-to: 6.5 6.6
Task-number: QTBUG-112957
Change-Id: Ib6ed891a84c6b118836497d6ead48019bb1b9052
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
This is to avoid it formatting lambda => as = >
Change-Id: Ie9cb19c8594cab6fe33910f52800fc1b6207a6f6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Unix dispatcher is not used and - as such - redundant on WASM.
Change-Id: Ia8789ef783b06ce9cfba2ce9d67159db2355b594
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Make `mutex` member private and make all former users call
new public member functions that perform locking. Make
old non-locking member functions private.
Change-Id: I29092d1bd785aa6b830183c1c1fe125b16e0d633
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QMetaObject::invokeMethod() with a lambda instead of setting
up a permanent signal/slot connections with BlockingQueuedConnection
type. This makes the code flow easier to follow.
Change-Id: I0e77433e3fb96f99ed39f2d14dad737d444d3269
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The [NSWidow windowNumberAtPoint:belowWindowWithWindowNumber] API has issues
with sometimes being out of sync with the window server, resulting in failing
to hit test windows that we know are there.
This has manifested in flakeyness in our tests, for example in tst_QWindow's
testsInputEvents: http://testresults.qt.io/grafana/goto/YNGj7TgIg
A workaround is to call [NSWindow windowNumbersWithOptions:0] to force a sync,
but we might as well use the more modern block based API to iterate our own
windows in Z-order. This API seems to do the required sync on our behalf,
or at least doesn't operate on stale data.
The logic has been otherwise kept as is, including treating non-top-level
windows as candidates for hit testing, which seems strange for a function
named topLevelAt(). This is to be investigated further.
Task-number: QTBUG-108402
Task-number: QTBUG-115945
Pick-to: 6.6 6.5
Change-Id: I5599881c381a0a673d262e4b9585e2c6798c9810
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Back then elfreader and other unix functionality was added for the
purpose of having one generic deployment tool but it was never used.
Remove the code to be more clear on what to expect.
Pick-to: 6.6
Change-Id: I2b7a759de04afe0c5fb210ad65f1c86e32934f18
Reviewed-by: Timothée Keller <timothee.keller@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
As /examples/opengl is already listed in exampledirs, .qdoc source
files under that directory do not need to be listed in sourcedirs.
Doing so will cause the example to be listed twice in lists generated
by the \generatelist and \annotatedlist QDoc commands.
Same applies to imagedirs variable.
Pick-to: 6.6 6.5
Change-Id: I168dbfe111a4cb9615626eb9869f97d3814a14b7
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Safiyyah Moosa <safiyyah.moosa@qt.io>
We updated FreeType to 2.13.1, but forgot the attribution file.
Pick-to: 6.6 6.5 5.15
Task-number: QTBUG-115340
Change-Id: I1e7bc91b9fd4a7674d40d15b3f2759f38831cd8e
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Also while touching code, replace arg usage with QSB to prevent temp allocation
Change-Id: I3573266dbee8a00ae917773c107b5df7774acb79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When appending to an empty string or byte array, we optimize and
copy the internal pointer. But if the other string/byte array was
created with fromRawData this might be temporary data on the stack/heap
and might be de-allocated or overwritten before the string/byte array
is used or is forced to make a deep-copy. This would lead to incorrect
data being used.
This is easy to overlook if you plan to append multiple strings
together, potentially supplied through an argument. Upon appending a
second string it would make a full copy, but there might not be a
guarantee for that. So, it's hard for users to avoid this pitfall!
Fixes: QTBUG-115752
Pick-to: 6.6 6.5 6.2
Change-Id: Ia9aa5f463121c2ce2e0e8eee8a6c8612b7297f2b
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
IndexedDB version of QSettings will now use solely the sync versions
of data access functions. Those will suspend with JSPI.
This makes IDB settings conform to the QSettings contract - and also
allows us to enable tests in tst_qsettings for the IDB version of
QSettings.
Also, do not treat the IndexedDB format as one defining read/write
functions in QSettings - those are the same as for ini format, as
IndexedDB settings backend uses a backing ini file.
Change-Id: Iee3471cc79c0cea87378923cf9baac58e56d1272
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Observers should only be registered when _reading_ the property.
Otherwise we get binding loops.
Pick-to: 6.6 6.5
Change-Id: I974f6ea444fa7a5d333ed79eea6f34e3d757d169
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Use QMetaObject::invokeMethod() with a lambda instead of setting
up a permanent signal/slot connections with BlockingQueuedConnection
type. This makes the code flow easier to follow.
Change-Id: Ib6566e7a4694ecbd69900b645d020b3331fb3462
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Split the source code into a separate file for easier code
navigation and to better match the rest of Qt.
Update the link to the blog post explaining the
preventDllUnload() function, mention the blog post title
to make it easier to find it again when the link breaks.
Change-Id: I061d72bc795110f03352abf10fc639ddd6243527
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Create the global static free timer ID list in the constructor
so that it is destroyed after any global static QDaemonThread instance
that may be using it.
Fixes: QTBUG-58732
Pick-to: 6.6
Change-Id: Ic2d33ac3aa2ec3ca0261be9996920aae260e16fd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
During refactoring of the vista style in
46f98147f4 a regression slipped into
subControlRect()'s default branch which lead to a double call of
visualRect(). This breaks nearly all subControlRect() calculations in
rtl mode.
Fixes: QTBUG-116224
Pick-to: 6.6 6.5
Change-Id: Ida722e1b6c6a311b27a9b48d1fe1378b47c21cf4
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Consider the following situation: There are CMake tests in
qttools/tests/auto/cmake that configure and build CMake test projects,
essentially as external projects. One of those test projects does
find_package(Qt6 COMPONENTS LinguistTools). This call fails in a prefix
build, because Qt6LinguistToolsConfig.cmake is not installed yet. It
merely exists in qttools-build/lib/cmake/Qt6LinguistTools.
We must adjust CMAKE_PREFIX_PATH to be able to find Qt6LinguistTools. We
also must adjust QT_ADDITIONAL_PACKAGES_PREFIX_PATH to be able to find
the LinguistTools component of the Qt6 package.
Use the prefixes setup from the support for building examples as
external projects and use it for CMake test projects as well.
Task-number: QTBUG-84884
Change-Id: I1bd5d5084cf931196bdb014cd75ca7578cd9decb
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The default argument staying on the old int overload meant that on
Windows a nullary tryLock() call would need to go through both DLL-
exported functions (int, then QDeadlineTimer) and on non-Windows
platforms, it would hit the out-of-line QDeadlineTimer(qint64)
ctor.
By moving the default argument from the old to the new function, we
reduce the nullary call on Windows from two to one exported functions.
On non-Windows, we make it to hit QDeadlineTimer's constexpr inline
default ctor instead.
Found in API-review.
Amends ff9da1db0b.
Pick-to: 6.6
Change-Id: Id3e9923cf97ee1673fe05c85c30b5a12531857b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The density of Q_FOREACH uses in this and some other modules is still
extremely high, too high for anyone to tackle in a short amount of
time. Even if they're not concentrated in just a few TUs, we need to
make progress on a global QT_NO_FOREACH default, so grab the nettle
and stick to our strategy:
Mark the whole of Qt with QT_NO_FOREACH, to prevent new uses from
creeping in, and whitelist the affected TUs by #undef'ing
QT_NO_FOREACH locally, at the top of each file. For TUs that are part
of a larger executable, this requires these files to be compiled
separately, so add them to NO_PCH_SOURCES (which implies
NO_UNITY_BUILD_SOURCES, too).
In tst_qglobal.cpp and tst_qcollections.cpp change the comment on the
#undef QT_NO_FOREACH to indicate that these actually test the macro.
Task-number: QTBUG-115839
Change-Id: Iecc444eb7d43d7e4d037f6e155abe0e14a00a5d6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Clean up after all users are ported to the SlotObjUniquePtr overloads.
Pick-to: 6.6 6.5
Change-Id: I3e58249296ea9674c45fb412463ae3201518de72
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously name() has always used underscore and bcp47Name() dash; let
the user chose which one best fits their needs.
[ChangeLog][QtCore][QLocale] QLocale's name() and bcp47Name() now let
the caller chose what separator to use between the tags making up the
name, where there is more than one.
Change-Id: Ia689e6a3fb581b42905e7fb1ae7a7b688244d267
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's more numerically robust than acos() - we can't hit a range error
if we get strange rounding effects - and we've got the value of the
sin of the angle already (it's the length of the x, y, z part), so
might as well use it. As length is necessarily positive, atan2() will
give an upper-half-plane resolution, matching what acos() gave us.
This incidentally means that you no longer need to normalize() your
quaternion before you ask for axis and angle.
Task-number: QTBUG-114313
Change-Id: If3fa2b371c72991f1f8f151f78ef7f9180aa87cf
Reviewed-by: Matthias Rauter <matthias.rauter@qt.io>
Reviewed-by: Jøger Hansegård <joger.hansegard@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The examples have been removed as part of the examples revamp project.
This patch resolves a number of qdoc warnings.
Pick-to: 6.6 6.5
Change-Id: Ie3d2f5637136c631d7e9f7a8ffd93baea52f77d8
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Explicitly include <QtCore/qshareddata.h> into the headers that use
QESDP.
This commit amends 6ff4c3d787.
Found during Qt 6.6 API review.
Pick-to: 6.6
Change-Id: Ia52d9e7551295f0c7380c7ed33b68f452cb689aa
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
... and rename it to qbswap(), thus enabling the endian conversions
for Id128bytes via q{To,From}{Little,Big}Endian() functions.
Found during Qt 6.6 API Review.
Pick-to: 6.6
Change-Id: Ie320cee52ec2b9de0aaa112adec8febb7f5b68a2
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
There is no need to check if lhs.d == rhs.d in the end of the function,
because we already have the same condition earlier.
If none of the previous conditions was true, we can just return false.
This commit amends 7a37083817.
Pick-to: 6.6
Change-Id: I06dca9b3dedf5895820685a6ded5363963e6fa3f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
... and use them around the code.
Avoids the impedance mismatch between users, which .release() their
SlotObjUniquePtr's into the ctors, and the ctor, which constructs its
member SlotObjUniquePtr from that.
The old constructors are left in on purpose and removed in a follow-up
commit to facilitate cherry-picking into branches that might have
additional callers.
Pick-to: 6.6 6.5
Change-Id: I6f8bce317d5116296973a3a2e3f97db1451f579d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It didn't actually land in 6.5.
Amends commit 5a0dcda171.
Pick-to: 6.6
Change-Id: I8d63f0e5019c37dbbc02294515444dd8e901dd6f
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
More expressive and type-safe.
Move it to the .cpp file (the only user) and make it static to avoid
creating a non-namespaced symbol.
Pick-to: 6.6
Change-Id: Ib9b393e660e51c1791ed3a9a4a12e5c75736bf2a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We already have a QObject (*this), so we don't need another one in the
form of a QTimer; we can just let QTimerEvents be delivered to *this.
Changes surprisingly little code, because the code used start(int)
already.
Mark the timerEvent() final to avoid surprises from potential
further-derived classes.
Pick-to: 6.6
Change-Id: Ib4ee8f8f6b9995d67d964afb231e913a00a76af3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QFlags<Option> will anyway store the value in an `int`, so we gain
nothing from choosing quint8 as the fixed type, except artificially
limiting the number of possible future options to eight.
Found in API-review.
As a drive-by, put options one per line and add a trailing comma where
possible.
Pick-to: 6.6
Change-Id: I0ed588ea6c7912e50705af89c47e2cf7e2ee23a0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Move the definition of cachedRelaySlotMethodIndex inside
relaySlotMethodIndex() to get thread-safe initialization.
Change-Id: I48683078f4dc610e9c7d1591287cf2d1dcfe8778
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When Edit Popup Menu was not shown, the size of EditContextView was
wrongly returned. That is why the popup appeared in the wrong position
and then "jumped" to the right one.
To get correct values even when Popup is invisible, size should be
calculated manually by getting height/width of all visible buttons (with
getMeasuredHeight/getMeasuredWidth[0]) and paddings of EditContextView.
[0]https://developer.android.com/reference/android/view/View#getMeasuredWidth()
Pick-to: 6.6 6.5 6.2
Fixes: QTBUG-115632
Change-Id: I5f6abffab1a1e836c59a922ffa727d893ca9820f
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Accent color role has been renamed according to name rule of other
color roles in QPalette.
Fixes: QTBUG-116107
Pick-to: 6.6
Change-Id: I70ac98a1e97afbdc7ea5f8d79f808c307e170712
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
There seems to be no current() method. Replace with the vkInstance
method.
Fixes: QTBUG-115853
Pick-to: 6.6 6.5 6.4 6.2
Change-Id: Ifc0f741186092862b498fe4be2d39076b92fa725
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Some older compilers used to generate warnings if the 'inline' keyword
was used only on method definition, but not on its declaration.
It does not seem to be a problem at the moment, but still move the
'inline' keyword from the definition to the declaration of the new
QUuid constructor, toBytes(), and fromBytes() methods.
Split the fromBytes() declaration, moving the keywords to a separate
line, to fit into the 100 characters limit.
Found during Qt 6.6 API Review.
Pick-to: 6.6
Change-Id: Ic5bd3ad094669cda76592968789cf83e9a72bccd
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
We already return RSA/DSA/DH/EC, so we can also return generic.
Fixes: QTBUG-115718
Change-Id: I2064c2bbce2df73985609d27a94857a0ee2e6b42
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit e2f0495e7e.
Cleaning the cache is not be needed, as the invalidated key will make
sure that the cached QThemeIconEngine engine will not reuse the previous
engine to generate the pixmap, but request a new engine from QPA.
This way, a new pixmap will be generated also if system settings
change that will influence the pixmap generated by the platform engine.
Pick-to: 6.6
Change-Id: I9632c37c4ec86fe46acb701ec69a7868b3434322
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The function was replacing the `>` character in generator expressions coming from `add_compile_definitions`. This was creating generator expression syntax errors. Discard generator expressions from character replacing.
Add tests for the three cases.
Fixes: QTBUG-111717
Change-Id: I694d2908738085fdf15112834f20183a9f393422
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When changing the current index while the tab bar is not visible,
calculating the necessary scroll offset might result in wrong results if
the tab bar still has an old size. When the tab bar then gets shown and
resized, the scroll wouldn't be corrected, potentially leaving tabs
unnecessarily scrolled out.
We don't need to make the current index visible if the tab bar itself is
not visible, it's enough to flag the layout as dirty so that the next
show event (which either way makes the then current index visible)
triggers a laying out of the tab bar tabs.
Amends e851d4c06154bf02b23030ff1f7024a8b9edf874.
Fixes: QTBUG-115109
Task-number: QTBUG-113140
Pick-to: 6.6 6.5
Change-Id: I3d8633f9f8b907a36190123839a6104a17bfe138
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
This clarifies what doesn't work, that we print a warning, and that it
applies to all Unix systems aside from macOS, not just Linux.
Fixes: QTBUG-115852
Pick-to: 6.6
Change-Id: I80612a7d275c41f1baf0fffd1779701e98e7552d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
EM_LOG_DEMANGLE does nothing from emscripten 3.1.44 and is marked
deprecated. Also, it doesn't work for strict mode functions as
described in PR 19820, and needs the deprecated arguments.callee.
Change-Id: I4d71f50caa75373253881c4153acbc6ab38fcf18
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
- Mention QEXPECT_FAIL on the best practices page.
- Link to the best practices page from "Chapter 6: Skipping Tests with
QSKIP".
- Add some more links.
Pick-to: 6.2 6.5 6.6
Change-Id: I0c9e0adb9fe500791dad44869434cf6ecdcf51a1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
While at it, also make \brief a proper sentence, starting with
an uppercase letter and ending with a dot.
This amends code added in commit 29b2506e8c .
Pick-to: 6.6
Change-Id: I5ca4c5e2a7dd2e826ba4392f4ea0e0dee00c92f4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
d->model is the source model, so a QAbstractItemModel; techincally it
made no difference because it resolves to the same signal(s), but it's
less confusing as QAbstractItemModel.
Pick-to: 6.6
Change-Id: I4388a50ac33a2bee628fccc1aef6a9d1898e2ca2
Reviewed-by: David Faure <david.faure@kdab.com>
With JSPI, the main dispatcher loop is not exited and processEvents
should not be called, as events will get processed after the thread has
been unsuspended. processEvents posted with emscripten_async_call
causes stack corruption.
Fixes: QTBUG-115959
Change-Id: Ibccccbf54f18df2d03f0c5e817c3a7102e96c9ed
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QTimeZone is not trivially-copyable, so we shouldn't default arguments
of that type (cf. QTBUG-98117), but continue overloading.
Found in API-review.
Task-number: QTBUG-98117
Pick-to: 6.6
Change-Id: I24e9d6c10512a50c172b5722c7d75bf74adf60a6
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It has always returned dash-joined forms of the locale names, and
callers who need an underscore-joined form have been obliged to
replace('-', '_') before using them. Given that everything it adds to
the list comes from QLocaleId methods that accept a separator, it's
trivial to let it offer the same choice to its callers and save them
this hassle.
Amended code in QTranslater and QMimeType to save them that hassle.
[ChangeLog][CoreLib][QLocale] QLocale::uiLanguages() now lets the
caller choose what separator to use between the tags that make up each
locale-identifier in the list returned.
Change-Id: I91fcd0b988d9a64e0e9ad9e851f6cb8c1be8ae50
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This amends commit 9237908327, which
shouldn't have integrated, but apparently the qdoc check in Coin
wasn't running that day.
Pick-to: 6.5 6.6
Task-number: QTBUG-111550
Change-Id: Ife6108eb49fb8988d43390200de480fc5b57e58f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clarify that the order is the expected byte order of the input data.
Found during Qt 6.6 API Review.
Pick-to: 6.6
Change-Id: Iaa1f5eef22df60676e52197fbcf613f6e9970a3e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
That's weird and I have no idea how that worked.
Change-Id: I6ecb967e108256ebf1609e08ef02fc2ec83ef2ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 566def740e.
The fix had some unwanted side-effects when the
QAccessibleValueChangeEvent carried a value of type string. Only
QComboBox uses QAccessibleValueChangeEvent in such a way.
The consequence of the reverted patch was that it broke QComboBox
so that the screen reader would read aloud the value change event
regardless of the visibility or focus state of the QComboBox. (Thus, if
you e.g. changed the QComboBox::currentIndex on a *hidden* combo box,
the screen reader would still read aloud the event)
This is also the root cause of what is described in QTBUG-93763.
Also, due to the usage of NotificationProcessing_ImportantMostRecent
the screen reader would treat it as such an important event that it
would abort whatever it was currently speaking.
In addition, the reverted change didn't fix any bugs and it failed to
implement the suggested behavior in a correct way (as was described in
QTBUG-75003 - albeit properly described after the change was merged).
QTBUG-75003 has already been reopened due to this, and the change can
therefore be reverted quite risk-free.
Task-number: QTBUG-75003
Task-number: QTBUG-93763
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: Ib91872adc563c31534fe2b30fd9c447bfcca6b40
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Straightforward, the code was already iterating over a local const
copy, i.e. Q_FOREACH wasn't needed here.
Pick-to: 6.6 6.5
Task-number: QTBUG-115803
Change-Id: I3e806c54ce56b6eb06431eea6aea1758c8ecd154
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Commit 9db5ca87897340873a4606c651a37e0356e8f1a0 sets the default
qtDataDirectory to the value of qtInstallDirectory, which results in an
invalid path when appended to the SDK. This results in build failures
for Android when building with qbs. cmake builds are not affected as
the data directory is explicitly set in the build scripts.
Pick-to: 6.6 6.5
Change-Id: Ia29c5bae7648f5fccefe019c225e187985bd2592
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
We need to apply properties of the QWindow the underlying "native
window", in this case our <div>, on construction, without waiting
for the user to call one of the QWindow setters.
Pick-to: 6.6
Change-Id: Id422a9424f584e2269ef333e2c7c88a123ecb70b
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Only top level windows should have window manager features,
to match other platforms.
Pick-to: 6.6
Change-Id: I7a0563ef34aeb430d0b1a16633a5626482ccd17d
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
A child window should be possible to place at arbitrary positions
within its parent, even outside the parent's current rect. Once
the parent size is changed, the child might become visible.
The current code also caused issues when the parent did not
have a size yet (0x0) at the time of the child's setGeometry
call, resulting in the child always being placed at y=0.
Pick-to: 6.6
Change-Id: I1534b606ab6eb7d51216d3b305a1b60443c41ec2
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
For offscreen frames this is a significant improvement since
now we will have timings available after endOffscreenFrame()
returns, meaning the behavior matches the Vulkan, D3D12,
and Metal backends in this regard.
It also enables getting timings in frames that have
QRhi::finish() or QRhiCommandBuffer::begin/endExternal()
calls.
Change-Id: I1cc45a47e7215f342df0b1c600cc481088c8135b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Another one in the series of problems around having texture-based and
regular widgets in hierarchies where some widgets are native and some
are not.
Pick-to: 6.6 6.5
Fixes: QTBUG-115652
Task-number: QTBUG-108344
Task-number: QTBUG-113557
Change-Id: I34306503cb17ccb915b90168ec3f39e209f668e5
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Extended linear Display P3 + FP16 is likely the thing to use
on platforms such as VisionOS and iOS (and optionally on macOS)
and perhaps iOS). Enable testing this on macOS with the hdr
manual test.
Change-Id: I67f0bdbadae8c7ebccae7de008f12fd8d9135529
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Pass an encoded URI string before parsing them through the Android APIs.
Fixes: QTBUG-114435
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I65131799fad81bfe7490d663d3b7996c94d37f0b
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
A subinfo has its own item list. Recurse into it when debugging.
Task-number: QTBUG-115058
Pick-to: 6.6 6.5
Change-Id: Ide820e4440caa97b84a3366c2d385546fb6026ec
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The method calls show() on a dock widget group window, when the window
flags have changed. When all of its contained, tabbed dock widgets are
programmatically hidden or docked on the main window, an empty group
window is shown.
This patch implements bool hasVisibleDockWidgets(). It returns true, if
at least one of the group window's dockwidget children is not hidden.
It replaces show() by setVisible(), passing the return value of
hasVisibleChildren().
It adapts tst_QDockWidget::floatingTabs() to test the fix.
(Drive-by: remove dead code)
Fixes: QTBUG-115058
Pick-to: 6.6 6.5 6.2
Change-Id: Ifb8e2450e91a7c78decc06f592e160631ca2faf5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The method reads the next element in a loop, as long as valid elements
exist. Within the loop, it returns
- false if the end of an element has been reached
- true if a new element has started
When the document end has been reached, the loop continues, until
readNext() returns Invalid. Then, PrematureEndOfDocumentError is launched.
This is wrong, because reading beyond the document end is caused by a
missing return condition in the loop.
=> Treat document end like element end and return false without
reading beyond it.
=> Test correct behavior in tst_QXmlStream::readNextStartElement()
Fixes: QTBUG-25944
Pick-to: 6.6 6.5 6.2
Change-Id: I0160b65880756a2be541e9f55dc79557fcb1f09f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By actually registering them.
Commit 850d850c5a changed from
qMetaTypeId<QDBusArgument>() to QMetaType::fromType<QDBusArgument>() and
in Qt 6, fromType() does not register the type with the database. That
means the lines became runtime no-ops at that time or during the
QMetaType updates since 6.0. All they did was instantiate the C++ inline
variable.
The testing also detected we didn't register QList<QDBusVariant> as an
alias for the "av" signature. I'm not entirely sure you're allowed to
use this because QtDBus does not like re-registration of the built-in
types, and "av" is already assigned to QVariantList. This is no trouble
for the parser, anyway.
Minor change to qdbuscpp2xml to allow reading from stdin, so we don't
have to create temporary files.
Pick-to: 6.5 6.6
Fixes: QTBUG-115964
Change-Id: I80612a7d275c41f1baf0fffd177a14925e7d23ac
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
We've known for a long time that this is producing worse code with GCC
because of how we implemented in Q_ASSUME_IMPL(). So bite the bullet and
actually deprecate the macro, replacing all extant Q_ASSUME() with
Q_ASSERT().
The replacement is in C++23. Backporting the support onto Q_ASSUME_IMPL
was previously rejected by reviewers.
[ChangeLog][Deprecation Notice] The Q_ASSUME() macro is deprecated. This
macro has different side-effects depending on the compiler used (GCC
compared to Clang and MSVC), and there are certain conditions under
which GCC is known to produce worse code than if the macro was absent.
To give a hint to the compiler for optimizations, use the C++23
[[assume]] attribute.
Change-Id: I80612a7d275c41f1baf0fffd177a3a4ad819fb2d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Call QDBusMetaTypeId::init() in the cosntructor. This ensures that
the custom metatype registry is not destroyed before the instance
of the connection manager.
Task-number: QTBUG-58732
Pick-to: 6.6
Change-Id: I8c7c4c23deab2c7e11c6389a8976666ccf6baf48
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clarify that Qt will silently truncate oversized keys for
QSystemSemaphore and QSharedMemory. This can have implications for some
use-cases, for example if an absolute path file name is used as a key
name to synchronize access to files.
Change-Id: I74742d11fd72139ff69d033e611904dcf0e9e822
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This constructor matches way too many argument types (integral,
unscoped enums, FP types), so it's likely to cause mayhem, even if
left in as an explicit constructor.
We now have a named constructor for the same functionality, so just
drop the "unnamed" constructor.
"Unnamed" constructors are important when emplacement is more
efficient than construction + move, or when implicit conversion is
required. Neither is the case here: The named as well as the
"unnamed" constructors just copy ten bytes around, and the compiler
can optimize those extra copies away just fine.
Found in API review.
Pick-to: 6.6
Change-Id: I7faafd3ebf522fb2b0e450112fb95d643fece5ce
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
When the placeholder text is changed after having been displayed, it
doesn't get updated on the screen any more, unless the entire viewport
is updated, e.g. because of a document change or a focus event.
This patch simplifies QPlainTextEditPrivate::updatePlaceHolderVisibility()
to update the visibility if the text document is empty.
It replaces the member QPlainTextEditorPrivate::placeholderVisible
by the function isPlaceHolderTextVisible(). It returns true, if the
document is empty and a placeholder text exists, and otherwise false.
It adapts and corrects tst_QPlainTextEdit::placeHolderVisibility():
- usage of new member function instead of data member.
- do not expect an empty placeholder to be visible.
Fixes: QTBUG-115831
Pick-to: 6.6 6.5 6.2
Change-Id: Ic4427ce7f7f1b8cde89957b9de0b978bd34ba923
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Were added for 6.6, but turns out they were not quite ready, and also
live better together with the quadpath class in the curve renderer.
This reverts commit aaccd50224.
Pick-to: 6.6
Change-Id: I58399f8e280d5353cb9c3102e8a8e15dcfa4484a
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Under some configure options, gcc13 emits an intractable warning on
this line. This patch works around it.
Fixes: QTBUG-115809
Pick-to: 6.6 6.5 6.2
Change-Id: Ib63f2ad81ebdb1f609a7f42c25119c5ae29f08bb
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Child windows on Windows cannot have a frame, so checking only for
Qt::FramelessWindowHint is not sufficient. Add an additional check
to see if the window is a native child (has the WS_CHILD flag).
Pick-to: 6.6 6.5
Change-Id: Ib5cbec0f6157da687a5585e12a6c4c6935919538
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Presumably it passes elsewhere due to pch or unity builds
Pick-to: 6.6
Change-Id: I69b52751765b12d2d4dd701c2e022c9014d6c16f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QMenuPrivate::hideMenu() hides a menu and reposts events in case a new
action has become the active one. For that purpose, it waits 20ms and
60ms for visual effects to be rendered.
If the last action has been triggered, the menu's deleteLater slot has
been called before hideMenu(). In that case, it gets deleted while
events are processed during the waiting periods.
Subsequently, menu becomes stale.
This patch replaces the QMenu * argument with a QPointer. Early returns
are inserted after waiting. QSignalBlocker is replaced by manual signal
blocking, to prevent the signal blocker from recovering the state of a
stale object, when it goes out of scope.
An auto test is not added: The error scenario occurs, when a menu is
triggered by keyboard input, while a mouse event is sent to the main
window from outside the menu. Such a test scenario is complex to match
and exposed to flakiness.
Fixes: QTBUG-115597
Pick-to: 6.6 6.5 6.2
Change-Id: I4f937fe66fb1b5cf78ebee70fd0006712172cb12
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The current implementation is not thread safe - it is possible
to update and query the network information without any locking.
Protect the internals of the backend with a lock and move the
object to the main thread.
Task-number: QTBUG-115748
Change-Id: I9511fc3522ae82cffca42abc54eb79cb156397c4
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QAndroidPlatformInputContext::focusObjectStopComposing() sends an input
event for each character newly added by the Android virtual keyboard.
It then sends a second input event to notify that the cursor has
advanced to the position after the new character.
The implicit assumption is, that the receiver of the input event does
not change the text.
If e.g. QLineEdit::setText() is called in the QLineEdit::textEdited
slot, the text does change. If the change implies a cursor change,
QLineEdit notifies the platform input context about it.
However, by sending the second input event, QAndroidPlatformContent
returns the cursor back to the position after the last character added
by the virtual keyboard.
This patch joins the composed text and the cursor position into one
single input method event. A new cursor position, set by the receiver
of the input method event, is no longer overridden.
The patch adds test functionality to tst_QLineEdit::setText().
Fixes: QTBUG-115756
Pick-to: 6.6 6.5 6.2
Change-Id: I85ffac5d6bab93ccb144be0f5b8083258a270550
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add more tests on WebAssembly platform for better tests coverage.
Change-Id: Iaaaa824ae6058a9ae5dba4c4038a7f687bfc17e0
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
It referenced QDeclarativeComponent, which has been gone for a very long
time. Also replace the foreach with a proper for loop.
Change-Id: I7f30ca10a235137dbdf34b7684e2c38610242b17
Reviewed-by: Andreas Eliasson <andreas.eliasson@qt.io>
Take 2.
Re-land previously reverted commit, due to not handling resource names
that are not valid c++ identifiers. Now we sanitize the resource names
just like rcc does by replacing non-alphanumeric characters with
underscores.
Original commit message.
During the Qt 5 -> Qt 6 and qmake -> CMake porting time frame, it was
decided to keep resources in an object file (object library), rather
than putting them directly into a static library when doing a static
Qt build, so that the build system can take care of linking the
object file directly into the executable and thus not forcing
project developers to manually initialize resources with
the Q_INIT_RESOURCE() macro in project code.
This worked for most qmake and cmake projects, but it created
difficulties for other build systems, in the sense that these projects
would have to manually link to the resource object files, otherwise
they would get link time errors about undefined resource symbols,
assuming they kept the Q_INIT_RESOURCE() calls.
If the project code didn't contain Q_INIT_RESOURCE calls, the
situation would be even worse, the linker would not error out,
and the missing resources would only be discovered at runtime.
It's also an issue in CMake projects that try to link to the
library files directly instead of using the library target names,
which means the object files would not be automatically linked in.
Many projects try to do that because we don't yet offer a convenient
way to install libraries and reuse them in other projects (the SDK
case), so projects end up shipping only the libraries, without the
resource object files.
We can improve the situation by moving the resources back into their
associated static libraries, and only keeping a static initializer as
a separate object file / object library, which references the actual
resource initializer symbol, to ensure it does not get discarded
during linking.
This way, projects that link using targets get no behavior difference,
whereas projects linking to static libraries directly can still
successfully build as long as their sources have all the necessary
Q_INIT_RESOURCE calls.
To ensure the resource symbols do not get discarded, we use a few new
private macros. We declare the resource init symbols we want to keep as
extern symbols and then assign the symbol addresses to volatile
variables.
This prevents discarding the symbols with the compilers / linkers we
care about.
It comes at the cost of an additional static initializer per resource,
but we would get the same + a bigger performance hit if we just used
Q_INIT_RESOURCE twice (once in the object lib and once in project
code), which internally needs to traverse a linked list of all
resources to check if a resource was initialized or not.
For GHS / Integrity, we also need to use a GHS-specific pragma to keep
the symbols, which we currently use in qtdeclarative to ensure qml
plugin symbols are not discarded.
The same macros will be used in a qtdeclarative change to prevent
discarding of resources when linking to static qml plugins.
A cmake-based test case is added to verify that linking to static
libraries directly, without linking to the resource initializer
object libraries, works fine as long as the project code calls
Q_INIT_RESOURCE for the relevant resource.
This reverts commit bc88bb34ca.
Fixes: QTBUG-91448
Task-number: QTBUG-110243
Change-Id: Idce69db0cf79d3e32916750bfa61774ced977a7e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The density of Q_FOREACH uses is high here, too high for this author
to tackle in a short amount of time. But they're concentrated in just
a few TUs, so pick a different strategy:
Mark the whole plugin with QT_NO_FOREACH, to prevent new uses from
creeping in, and whitelist the affected TUs by #undef'ing
QT_NO_FOREACH locally, at the top of each file. Since the TUs are part
of a larger executable, this requires these files to be compiled
separately, so add them to NO_PCH_SOURCES (which implies
NO_UNITY_BUILD_SOURCES, too).
Task-number: QTBUG-115839
Change-Id: I42c26cb5d95add115e57cc484a0e1a93ed368ddd
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
The QSystemSemaphore::platformSafeKey was intended to truncate oversized
keys on Windows, but didn't. The fix is to make sure MAX_PATH is defined
when compiling on Windows.
Change-Id: I03f3bee901203d901bda05a841451c8a2d2f3924
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 4c1df115ec.
We cannot guarantee that there are no more QMetaType
instances that reference the interfaces being destroyed.
All such instances will become invalid after the interface
destruction with no way to verify that.
Pick-to: 6.6 6.5
Change-Id: Iad17fe88753143734b8b817dda184e3c3818575c
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Combine the lock and the custom types list into one struct
so that the check code does not have to be duplicated.
Pick-to: 6.6
Task-number: QTBUG-58732
Change-Id: Ib61d5be3a3cb6465acc5834e5dcbc735fb8b4d8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Found in API-review.
Pick-to: 6.6
Change-Id: I261aa450d25288e7a3e8caa033ce5000e5dd77f2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When QT_NO_DEPRECATED_WARNINGS is defined, we undefine
Q_DECL_ENUMERATOR_DEPRECATED as it's used raw (rather than via an
intermediary or version-variant). The same is true of its _X()
variant, so do the same for this - which involves redefining it to a
still function-like macro, so that its parameter gets ignored.
This amends commit 59b03992ab (and shall
get conflicts on older branches, before the defines in question moved
to qtdeprecationmarkers.h in 6.5).
Pick-to: 5.15 6.2 6.5 6.6
Change-Id: If85c135cddbb33e93cb90f400af123c74e0298ac
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The assertion is triggered when a timer cannot be started. This
is normal occurrence when an application exits before all pending
D-Bus calls are processed. And there is a code handling such failure
in the same function. Qt also prints a warning message in this
case:
QEventDispatcherGlib::registerTimer: invalid arguments
Task-number: QTBUG-58732
Pick-to: 6.6
Change-Id: I37859443fa90ae1bf7da1572ac9b02a54c8e1b99
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add asserting verifying that a QCoreApplication exists when
the application static variable is dereferenced. This is a
requirement described in the documentation. Added assertion
makes invalid use much more visible. Without the assertion
only a message about invalid nullptr used with QObject::connect()
is emitted. This message is much less informative and does
not cause tests to fail.
Pick-to: 6.6
Change-Id: Id9d4a34679ca5aca93ee45ca2318d4ccf849887b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QEventDispatcherGlib: it used the out-parameter timespec to set a
timeout in milliseconds, making timerWait() return milliseconds is more
straightforward. Also timerWait() returns the time rounded to
milliseconds, so the code in QEventDispatcherGlib that rounded up the
timespec::tv_nsec part was no-op, tv_nsec was always 0 IIUC.
In QEventDispatcherGlib, guard against overflow with qt_saturate.
Change-Id: Ie6f78374d00cbe8a6adf7b50ed67c8c86ab4d29d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
First lookup with value(key), second lookup with remove(key). Use
constFind() to get an iterator and use that instead.
Pick-to: 6.6 6.5
Change-Id: Idce585ad2269be91eda0381aeb2f2d164033f71f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes the rest of the code slightly cleaner.
Change-Id: I67606b369f00d54fc24f7d6f41c004a728d37b5f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Introduce a mutex that protects access to the spy hooks list.
Also don't pass around raw pointers to the spy hook list,
those can change when new hooks are added and storage is
reallocated. Change the type of the hooks list to QList
to take advantage of copy-on-write in common case.
Check whether the global static is destroyed in qDBusAddSpyHook().
Change-Id: I440a88ce088d6fb5817660c8e1e02901281b842f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
operator=(~) and assign(~) share similar names but, until now, have not
shared the same functionality. This patch introduces the usage of
QByteArray::assign() within the non-sharing assignment operator to
effectively boost efficiency by reusing the available capacity.
Since these assignment operators are frequently used in many places,
both within Qt and non-Qt code, this patch comes with benchmarks.
The preview of the benchmark results are compared with this patch and
before this patch. The findings indicate a slight enhancement in
performance associated with the assignment operator. Despite the results
displaying only a minor improvement, progress has been made. Therefore
use assign(QByteArrayView) as replacement.
(x86_64-little_endian-lp64 shared (dynamic) release build (O3); by
gcc 13.2.1, endeavouros ; 13th Gen Intel(R) Core(TM) i9-13900K
benchmarks executed with -perf -iterations 1000000
* The last value at the EOL represent the string size.
QByteArray &operator=(const char *ch) (current)
65 cycles/iter; 317 instructions/iter; 16.0 nsec/iter (5)
71.7 cycles/iter; 383 instructions/iter; 13.0 nsec/iter (10)
59.8 cycles/iter; 318 instructions/iter; 10.9 nsec/iter (20)
70.8 cycles/iter; 340 instructions/iter; 12.9 nsec/iter (50)
80.2 cycles/iter; 419 instructions/iter; 14.6 nsec/iter (100)
164.2 cycles/iter; 899 instructions/iter; 29.9 nsec/iter (500)
260.5 cycles/iter; 1522 instructions/iter; 45.6 nsec/iter (1'000)
QByteArray &operator=(const char *ch) (before)
66.8 cycles/iter; 317 instructions/iter; 16.9 nsec/iter (5)
76.5 cycles/iter; 383 instructions/iter; 13.9 nsec/iter (10)
63.7 cycles/iter; 318 instructions/iter; 11.6 nsec/iter (20)
71.6 cycles/iter; 344 instructions/iter; 13.0 nsec/iter (50)
77.5 cycles/iter; 419 instructions/iter; 14.1 nsec/iter (100)
143.4 cycles/iter; 893 instructions/iter; 26.1 nsec/iter (500)
270.8 cycles/iter; 1516 instructions/iter; 48.2 nsec/iter (1'000)
Task-number: QTBUG-106201
Change-Id: I0745c33f0f61f1d844a60960cc55f565320d5945
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes the API symmetric again (fromBytes()/toBytes(),
fromString()/toString(), fromUInt128()/toUInt128()), but also gives us
the option to remove the QUuid(quint128), should we so choose, because
of its overly-broad argument matching range.
Found in API review.
Pick-to: 6.6
Change-Id: I91bd2450d62ed565ec3b8e46c875f4983bd9dc73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It matches any integral type, any unscoped enum and any FP type, so we
can't allow it to be implicit. In fact, it's probably better to only
have a named contructor, fromUint128().
Found in API review.
Pick-to: 6.6
Change-Id: I9b250e0b5e74a449b6df4efe3ea38b750c9744ed
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MSVC seems to emit warnings failing the build in some situations where a
return statement comes after a Q_UNREACHABLE. This does not seem to
happen on other compilers. The Q_UNREACHABLE_RETURN macro already exists to deal with this situation. Define it for MSVC.
Change-Id: Iad06f4048e2829b1eac4f78a1053041ef72c21e7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Description added to the html tags for accessibility in wasm through the
aria-description property
Change-Id: Ic1976d5c4c64ea45298f24b660807adeda6fdb64
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Move the SlotObjUniquePtr directly into the QMetaCallEvent, without
having to up and down the ref-count.
Pick-to: 6.6 6.5
Change-Id: I029f71c60defce71ac8778547efe999ce0cf7b4b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Only const members of the object are used inside the function body.
This addresses a review comment for 0f37c47713
Change-Id: I873d87104eb2483c4388929487d750d4a7d44bf3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using Q_FUNC_INFO has an advantage that at least GCC includes
the variable type and name into the string. This makes it much
easier to understand access to which global static is causing
an assertion.
Pick-to: 6.6
Change-Id: Ie6ce992921c0969df262fed22024a22650783f93
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Test sendEventsOnProcessEvents has been noticed to fail when
qgtk3 (Glib) is loaded - Should be fixed in QTBUG-87137
Moving test from blacklist to use QEXPECT_FAIL as it's more
recommended until test is fixed in the relevant configurations.
QEXPECT_FAIL is selected to use as original investigator
reported also some cases when glib is working. Therefore
this approach is giving us more insight for further
investigation is it always failing with glib or not.
It was also reported linkage to zeroTimer test QTBUG-84291,
but not sure why removing that has affected to this one.
Update to QEXPECT_FAIL documentation to tell in first place
that XPASS is not only marking it as XPASS but also failing
the test. Same is mentioned in different location but it
needs more searching or testing how it works in real test.
Task-number: QTBUG-115155
Change-Id: I7fb4ef28dba8adb7009be528f88fc758a12e9006
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Defining USE_LEXEM_STORE breaks compilation, and the commit that
introduce it (in the pre-public history) does not shed any light on its
usage.
Change-Id: Ic616bf9f2584151dab3f654d64025fcdc0ade25c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The density of Q_FOREACH uses isn't very high here, but at this time,
this author just goes through the code-base and white-lists TUs that
still use Q_FOREACH in order to globally enable QT_NO_FOREACH.
Mark the whole plugin with QT_NO_FOREACH, to prevent new uses from
creeping in, and whitelist the affected TU by #undef'ing QT_NO_FOREACH
locally, at the top of each file. Since the TU is part of a larger
executable, this requires the file to be compiled separately, so add
it to NO_PCH_SOURCES (which implies NO_UNITY_BUILD_SOURCES, too).
Task-number: QTBUG-115839
Change-Id: If731d02f65131c94afa8beb51679ed2ff7d2cdaa
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QDate's constructor can see maxJd() and minJd() without namespace prefix.
QDateTimeParser::SectionNode's name() inherits visibility from
QDateTimeParser of its Section enum's members.
Change-Id: I6315c4ede8875ef725d5b778eebac1e2027cd8b1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The code of a class doesn't need that class's prefix to access members
of the class.
Change-Id: I4cc2f72c90cff48b331dc12d390c45c0639606b3
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Simplifies the code at the call site.
Even though QDebug has support for streaming std::list (SpanList), the
format of the output would be different than what's already used here,
hence the custom operator<<().
Drive-by, port from Q_FOREACH to ranged-for
Task-number: QTBUG-115803
Change-Id: I30953c92e0c9febc01497c1117fa472b4718820e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Now that the "and" is only seen in enumdata.py and comments, we can
s/And/and/ in all the various territory names that used it.
Change-Id: Ic376d5904b6f5ab54931f96230c1dd5b7f357b8d
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Various comments need to continue using the enumdata.py names, as they
associate data with particular enum members, but we can now correctly
use the en.xml versions of their names when we report them, rather
than the enum-friendly names we use in the code. Since this now means
the data may stray outside plain ASCII - it'll be UTF-8-encoded - this
implies replacing the QLatin1StringView()s of the code that formerly
read this data with QString::fromUtf8().
Fixes: QTBUG-94460
Change-Id: Id3b08875a46af58c0555c3e303b0e15a19441509
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We could already use dashes in some, rather than spaces, and now no
longer need to capitalize each word. This changes the *_name_list[]
entries for affected languages to more closely match what CLDR gives
as their names. It also amends various comments. Added tests for the
QLocale::*ToString() functions to cover the entries changed.
Task-number: QTBUG-94460
Change-Id: I0163795cb282881f15a97be00a5311c1936c3a09
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since the feature breaks Qt build in some configurations, disable it
by default and make private, so users should enable it explicitly and
make sure that openssl libraries are accessible for linking at build
time by either PATH or LD_LIBRARY_PATH.
Fixes: QTBUG-114783
Pick-to: 6.6
Change-Id: I6eb53c43ed937ec1c0164025bc8953cc5170dc44
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Axel Spoerl
Anton Kudryavtsev
Christian Ehrlicher
André Klitzing
Thiago Macieira
Timur Pocheptsov
Morten Sørvig
Michael Weghorn
Ahmad Samir
Tor Arne Vestbø
Sharad Sahu
Fabian Kosmale
Olivier De Cannière
Alexey Edelev
Timothée Keller
Antti Määttä
Assam Boudjelthia
Hatem ElKharashy
Ievgenii Meshcheriakov
Laszlo Agocs
Andreas Eliasson
Mikolaj Boc
Ivan Solovev
Lorn Potter
Piotr Wierciński
Pasi Petäjäjärvi
Mate Barany
Edward Welbourne
Mårten Nordheim
Kai Köhne
Marc Mutz
Tasuku Suzuki
Alexandru Croitor
Friedemann Kleint
Oliver Wolff
Topi Reinio
Eskil Abrahamsen Blomfeldt
Ulf Hermann
Joerg Bornemann
Bartlomiej Moskal
Santhosh Kumar
Volker Hilsheimer
Orkun Tokdemir
Mitch Curtis
Jan Arve Sæther
Aaron McCarthy
Jøger Hansegård
Eirik Aavitsland
Dennis Oberst
Shreya Pattani
Tero Heikkinen
Jonas Karlsson
Ilya Doroshenko