Change-Id: I4cfb8e86dd9a305ff47df672ebf8637c64418fd0
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Hatem ElKharashy <hatem.elkharashy@qt.io>
Reviewed-by: Antti Määttä <antti.maatta@qt.io>
Found a problem on GCC 9.4 where asan/ubsan seems to break
std::numeric_limits<int128>::min():
runtime error: negation of 0x80000000000000000000000000000000 cannot be represented in type '__int128'; cast to an unsigned type to negate this value to itself
This is the -i _after_ we've already checked for ::min() two lines
above. It works with Q_INT128_MIN, though, so use that.
Pick-to: 6.6
Change-Id: I778980baf4e7eea9f8de06697d792241314acacd
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QComboBox implicitly selects the first item that gets inserted into the
model. This happens in response to the model's rowInserted signal, at
which point the item view might not have handled the rowInserted signal
yet. Because of that, the view couldn't update the accessibility bridge,
so informing accessibility about a row being selected that doens't exist
in the bridge's representation of the table yet will result in data
being out of sync, and depending on the bridge implementation trigger
asserts.
Fix this by explicitly updating the accessibility bridge before
implicitly selecting the first row.
Fixes: QTBUG-119526
Fixes: QTBUG-118585
Pick-to: 6.6 6.5
Change-Id: I2830c00751b3f18feb5d9252b23823c80229fed1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Do not use rounded value for conversion, which gives inaccurate result.
Example case: typical margin for A4 paper size is 8.4 pt. At 600 dpi,
the old code was using rounded point value of 8, which produces an
incorrect result:
8 / (72.0 / 600) = 67 pixels
The correct margin is of course:
8.4 / (72.0 / 600) = 70 pixels
Pick-to: 6.6
Change-Id: I44b2eeabb82fd3bf8e2dcfcba66ae96cde763875
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This update addresses an issue in converting page size from points to
device pixels. Previously, rounding the result could lead to an
overflow beyond the physical pixel capacity.
Example case: A4 paper size at 600 dpi:
- points to pixels: 842 pt / (72.0 / 600) = 7016.666666666667
However, the physical pixel height for an HP printer:
- GetDeviceCaps(hdc, PHYSICALHEIGHT)) = 7016
This fix prevents pixel size from exceeding the physical print area,
avoiding unprinted pixels.
Pick-to: 6.6
Change-Id: I66eabc628d3374d9cfb19b0eb5928f83afbc13dc
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch corrects the miscalculation in point unit conversion,
ensuring correct margin updates.
Previously, non-pt units were rounded to two decimal places. When
converting back to pt, rounding was to zero decimals, making the result
always less than the original. This could result in margins falling
below the minimum allowed.
Example:
original_points = 8.4
multiplier = 2.83464566929
mm: qRound(8.4 / multiplier * 100) / 100 = 2.96
new_points: qRound(2.96 * multiplier) = 8 // wrong!
The fix rounds back-converted values up to two decimals, ensuring they
are never less than the original and thus stay above minimum margins.
new_points: qCeil(2.96 * multiplier * 100) / 100 = 8.4
Also, remove unused function qt_convertPoint.
Pick-to: 6.6
Change-Id: I6109f8d381aec96db1ce04cc167f7b73c1c0b9a8
Reviewed-by: David Faure <david.faure@kdab.com>
... so QDebug e.g. stringyifies it automatically.
Requires making QNetworkRequest a Q_GADGET.
Task-number: QTBUG-114647
Change-Id: Idb4f3ecd98f79c1e28596c7be763898aba4b6562
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
[ChangeLog][QtGui][QKeySequence] Ctrl+Shift+S is now the standard
shortcut for Save As... on every platform.
Fixes: QTBUG-72916
Change-Id: Ic1815646651573c07994c4cd9df8f658e4a806b6
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
As opposed to QTest::qWaitForWindowActive, which checks if the window
is active, which is not a guarantee that the window has focus.
Task-number: QTBUG-119287
Change-Id: I9fe65b0474095389f6518ebaaf07c71143b6f459
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Instead of introducing the nested class InheritsQUntypedPropertyData
as a sentinel class for inheritance check, we can use BinaryTypeTrait
to handle the check. By doing this, we no longer need to maintain the
nested class.
Change-Id: Ie3aae976015d5fae6b6d072cad6ee52cd30b769d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
GCC at some point decided that it wouldn't include the full namespace
expansion in __PRETTY_FUNCTION__ for any type that is in the same
namespace as the template function being expanded (that is, the
QtPrivate) namespace. I don't know how long this behavior has been in
place, but it can be seen with GCC 13, where the expansion of that macro
inside QtPrivate::typenameHelper<QtPrivate::ModelIndex>() is:
constexpr auto QtPrivate::typenameHelper() [with T = ModelIndex]
This can be easily worked around by using a different namespace.
Fixes: QTBUG-119650
Pick-to: 6.6 6.5 6.2
Change-Id: Ica7a43f6147b49c187ccfffd179df309e43a70cb
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
qfloat16 implemented comparison with int, but not with other integral
types. As a result, comparing qfloat16 vs qint64 or short was
ambiguous, because the compiler had (at least) two options:
* qint64 -> int
* qint64 -> float
Fix it by explicitly introducing comparison operators for other integral
types.
Use the new compare helper macros for that, and implement helper methods
as templates restricted on integral types.
Note that we have to manually extend the std::is_integral type trait
because libstdc++ only treats __{u}int128_t types as integral when
compiling in -std=gnu++XX mode, and we compile Qt in -std=c++XX mode.
Fixes: QTBUG-117637
Change-Id: Id0c074af1e9ccc2c2492eb2cc4ee62a4a7131b07
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This replaces all the other helper macros which were used to
generate the relational operators before, and also gains support for
operator<=>() in C++20 mode.
Change-Id: I40cec3cb5a5c42523787414d610e00afe6fc86f8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QtGui][QScreen] The QAndroidScreen, QWaylandScreen and
QWaylandWindow native interfaces are now available on QScreen to
provide a handle to the underlying platform screen.
Task-number: QTBUG-113795
Change-Id: I83d70046678dfb79ee08544ddfc1820f3ff2d118
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Amend f54393ba70 by trying more font file
candidates, and don't try to download fonts if the query is pointing at
a resource.
Change-Id: I3fffc6fb3faa45b95540ebdf6cdf8ee4a49ebd78
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The layout is a ViewGroup, and should be created in the Android UI
thread, while for ease of use on C++ side we should be able to
construct the Java object in the platform window constructor to
avoid later calls not having a valid object reference. Trying to
make a blocking call to Android thread from Qt thread can lead to
dead locks, so move only the creation of the layout itself into
Android thread, making the QtWindow a wrapper for it, which we can
immediately return to C++/Qt thread. Most of the calls made to
QtWindow are anyway already passed to the Android UI thread.
As a drive by, add a missing QtNative.runAction() to
bringChildToFront().
Change-Id: Ib2495ddda8267384656557cbe40be5da869f82c3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Update the manual test case for embedded windows to have
native window on Android.
There are still some sharp corners, for example:
* The windows are implemented with SurfaceViews, which makes
z-ordering with multiple of them a bit tricky. The Surfaces
they instantiate are basically z-ordered to either be below
everything, with a hole punched in the window, or on top of
everything, with the Surfaces created later on top of the
ones created earlier. Also, with the foreign views it looks
like the native view is on top of the Surface, because it
is created later. And since the child windows create their
Surfaces before the parent, they would be behind the parent
window, currently circumventing this with letting the
parent be z-ordered behind everything, and the children
on top of everything. A follow up commit addresses this by
changing the native view class to TextureView when multiple
windows are present.
* Parent window always gets the touch events - fixed in
a follow up commit
* If a child window has a text edit, it does not receive
focus when clicking on it
Task-number: QTBUG-116187
Change-Id: I32188ec5e3d3fce9fd8e3a931e317d1e081f691c
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Each QAndroidPlatformWindow has its own QtLayout,
instead of one for the whole app/screen. This paves the
way for addition of child windows.
Task-number: QTBUG-116187
Change-Id: I36c68cea1a5f27ded3696bcfc2fbc04d9a8ce79e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
To avoid any potential resizes during append looping
Task-number: QTBUG-119002
Change-Id: I8f4c391f05b5c5bd0b48a4f17b11996652006508
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
It is somewhat common HTTP method with RESTful use cases
(partial updates on resources)
Task-number: QTBUG-114637
Change-Id: Id252d3f4b54c3ebb8df5c93259e64a4af2d0ca2f
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Added to both QNetworkRequestFactory and QRestAccessManager
Task-number: QTBUG-114717
Change-Id: Ibca55bba548a034a0da7ea60550642c150b63dc2
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Provide users with means to use more modern time/duration type.
Please note that since QTimer does not currently support
timeouts larger than 'int' milliseconds, the limit on how long
durations can be expressed, remains. This should not
be an issue in practice with network requests, as a typical
int32 system can express timeouts of ~24 days.
[ChangeLog][QtNetwork][QNetworkAccessManager] Add std::chrono
support for transfer timeout.
[ChangeLog][QtNetwork][QNetworkRequest] Add std::chrono support
for transfer timeout.
Fixes: QTBUG-118714
Change-Id: If85678a5994c59bac5926e47f98c9cfeb2a07c30
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
These include:
- readyRead(), signal for indicating new data availability
- bytesAvailable(), function for checking available data amount
- downloadProgress(), signal for monitoring download progress
Task-number: QTBUG-114717
Change-Id: Id6c49530d7857f5c76bd111eba84525137294ea7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The class provides a way to represent server-side service endpoints.
With RESTful applications these endpoints typically have a need for
repeating requests fields such as headers, query parameters,
bearer token, base URL, SSL configuration. This class allows setting
of the repeating parts, while allowing the setting of changing parts
on a per-request basis.
[ChangeLog][QtNetwork][QNetworkRequestFactory] Added a new convenience
class to help with the needs of repeating network request details
imposed by the server-side service endpoints, which is common
with RESTful applications.
Task-number: QTBUG-113814
Change-Id: Iabcfaed786949ffbb0ad0c75297d0db6ecc1a3cc
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
New QHttpHeaders class for use in place of
std::pair<QBA,QBA>, QMap<QBA>, and QMultiMap/Hash<QBA,QBA>
to represent HTTP headers.
[ChangeLog][QtNetwork][QHttpHeaders] New QHttpHeaders class
Task-number: QTBUG-107042
Change-Id: I54766886a491acfc9a813a3414322a75011acb9d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
CMake knows about the ndk path so always pass the ndk-stack path
and not rely on the env var being set.
Change-Id: I2cfd8e0708c6b284964dc3dc85b1f080742b125d
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Where a date format only gives the last two digits of the year, along
with month and day of month, the day of the week can help settle the
question of which century to use. The date-time parser has used this
for some time, rather crudely, but only considered centuries adjacent
to the default (1900 through 1999).
Refine that by using QCalendar's new matchCenturyToWeekday(). Simplify
the account of parsing now that client code doesn't have to do this
for itself.
Task-number: QTBUG-46843
Change-Id: Id054cc87ec867a2498145932d721c3368210cba0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are various pitfalls and reasons to be wary of short formats.
Make clear what the hazards and remedies are. Expand on the existing
paragraph about the base-year for the century of two-digit years.
Task-number: QTBUG-46843
Change-Id: If7c3d13eec826671f8dce686e520a17c11572bc3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It previously had to kludge a 1900-to-1999 date into a 1950-to-2049
range; it can now tell QDTP to do that for it. In particular, this
fixes a problem with 00-02-29, which failed to parse using 1900 as
base year so couldn't be corrected to 2000-02-29, which is now the
date it finds directly.
Task-number: QTBUG-46843
Change-Id: I7ac936bdfb15b78daed5d237c5d921c800af4951
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The twentieth century is now some way behind us, so using its years
when parsing a date-time format that only provides the last two digits
is increasingly likely to produce unwelcome results. Most such formats
are saved by the "redundant" presence of a day-of-week field but, for
those that are not (notably including ASN.1 date fields), there is a
need to provide some way to over-ride the twentieth century default.
Allow the caller to pass a base year to the fromString() methods, of
QDate and QDateTime, and to QLocale's toDate() and toDateTime(), that
indicates the first of 100 consecutive years, among which the two
digits given can select a year. Add some test-cases to exercise the
new API.
[ChangeLog][QtCore][QDate] When fromString() has only a two-digit year
to go on, it is now possible to set the start-year of the century
within which this selects.
[ChangeLog][QtCore][QDateTime] When fromString() has only a two-digit
year to go on, it is now possible to set the start-year of the century
within which this selects.
[ChangeLog][QtCore][QLocale] When toDate() or toDateTime() has only a
two-digit year to go on, it is now possible to set the start-year of
the century within which this selects.
Fixes: QTBUG-46843
Change-Id: Ieb312ee9e0b80557a15edcb0e6d75a57b10d7a62
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This takes a YearMonthDay and a day-of-the-week, returning a QDate
that (if possible, else invalid) has the given day of the week and
differs from the YearMonthDay only in the century. This is useful when
resolving dates with only two-digit year information, which can be
disambiguated by the day of the week. Added tests of the new API.
This adds a new virtual method to QCalendarBackend, for which that
base class does provide a brute force implementation, so derived
classes do not need to add implementations. It is, however, a
binary-incompatible change for any backend plugins that may be in use
to implement custom calendars.
Worked out the details for the Gregorian calendar to make it possible
to compute the right century (and whether any century works) without
trial-and-error searching. Coded that up as its implementation of the
new method.
[ChangeLog][QtCore][QCalendar] Added a matchCenturyToWeekday() method
for use when resolving dates given day, month and last two digits of
the year, along with day of the week. Any custom calendar backend
plugins shall need a recompile and may, optionally, implement the new
virtual method behind this.
Change-Id: I6003c8d9423d6bfb833957bb5120f2d423219c7a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends 0f985e16ba, which accidentally
dropped this flag (duh!).
Change-Id: Ie772f9e524625edfcdcda4d73a9a712fcd77f8c8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This reverts commit d201c0a218.
Reason for revert: QNX have support only for OpenSSL1.1.
QNX will start supporting OpenSSL3 with upcoming QNX8.0 but as long as we want to support QNX7.1 (and even QNX7.0) removing OpenSSL1.1 support from Qt is not an option.
Change-Id: Ia2083eda318779968eb6ee84fff2f56ebe3dadf7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
They're too trivial for their own QTestLib-based approach, but we
don't want them in the header, either, reducing the compile times for
all users, so put them into an otherwise empty .cpp file.
Change-Id: Iae7fc4d4a29a0648b91752040854288e02da7045
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the private header to public.
Make documentation a part of public interface.
[ChangeLog][QtCore][QAtomicScopedValueRollback] New class.
Task-number: QTBUG-115107
Change-Id: I6c9f5448e74a5b62f4d97ee079944f4b1b731121
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
also fix misspelled 'inputMode' which seems to work.
we need to re focus to the canvas when window is raised
which will automagically close the native keyboard
when user clicks on non edit area.
Fixes: QTBUG-101404
Pick-to: 6.6 6.5
Change-Id: Iced9abc7b23e079b1060d2474a139aa653a8ca01
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
A default-constructed QLocale gets initialized with the
currently-active default locale, and apparently retains that setting
henceforth. That is why the `prior` member is not explicitly
initialized, which is confusing at face value.
Explain the mechanism better, and explicitly default-initialize the
member, so the next reader of the code saves the time to research
this.
Amends 76dfda1ad1.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I1d1171f8564c70a971938b92b809f63ba5637d3a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Easier to reason about by separating the concerns into separate
functions.
Pick-to: 6.6 6.5
Change-Id: I34666766ac2879577faea17bbd2b700bcb803f51
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Antti Määttä
Marc Mutz
Volker Hilsheimer
Jarkko Koivikko
Shawn Rutledge
Tor Arne Vestbø
Po-Hao Su
Thiago Macieira
Ivan Solovev
David Redondo
Tinja Paavoseppä
Juha Vuolle
Assam Boudjelthia
Edward Welbourne
Kai Köhne
Marianne Yrjänä
Rym Bouabid
Lorn Potter