If you have a property myprop of type float, testReadWritePropertyBasics
would happily accept
testReadWritePropertyBasics(myObject, 1, 2, "myProp")
The test would then fail when setting bindings, as we would try to
install a binding of type int on a float property, which gets rejected
at runtime.
To prevent unexpected failures, verify that the types match before doing
any further checks.
Change-Id: I3893563fce0e11f9e20afa7c6a1e1fe0385382ab
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
If the signal takes a value, we pass the current value of the property
to it.
As we now use eager evaluation, accessing the current value is now
possible.
Change-Id: I5e6947a6575bfa8ca5143f56620c645d4750a686
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This mirrors the functionality of QObjectCompatProperty::notify, and can
be useful to delay notifications until a class invariant has been
restored.
Change-Id: I1c16a0b1537a1b53d144c8abe48e546553edf877
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch fixes the breaking of case sensitivity handling. The removal
of QRegExp killed the wrong code paths which leads to inconsistencies
when changing the regular expression throuh methods like
setFilterWildCard or setFilterFixedString. Changing the case sensitivity
also nukes the original options that were set on the regular expression
if it was set through setFilterRegularExpression.
[ChangeLog][QtCore][QSortFilterProxyModel] Case sensitivity as well as
regular expression options handling have been fixed. The original value
is properly kept when using setFilterWildCard and setFilterFixedString.
The regular expression options are now also properly kept when changing
the case senstitivity through setFilterCaseSensitivity.
Fixes: QTBUG-92260
Pick-to: 6.1
Pick-to: 6.0
Change-Id: Ifb4732306f0c7d79ad0b18d3f5437c4523bb40e5
Reviewed-by: Igor Kushnir <igorkuo@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Flatpak doesn't allow to own random name with PID. Even after adding
such a permission into manifest, all flatpaked apps have PID 2, so only
one Qt application at a time can have tray icon.
Even though unique name is a part of the spec, no tray hosts really
check it and SNI implementations without unique name run just fine
inside and outside of Flatpak.
This fixes the inability of Qt applications to have tray icon in Flatpak
outside of KDE.
Pick-to: 6.0 6.1 5.15
Change-Id: Ieea6dc335b7a74537a51929f6e70ca68c84228fb
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Add empty string first like we have for x86.
This fixes offset checks, and reported missing features.
Pick-to: 6.1
Change-Id: I09f6be05641d5ed9ae5d91fa72f678fef60bdbe7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add SOLARIS cmake platform definition.
Add settings for QT_DEFAULT_MKSPEC so that qplatformdefs.h can be found.
Solaris has its gssapi symbols in libgss.
Solaris supports @ORIGIN.
Solaris ld does not support --dynamic-list needed for reduce relocations.
Make solaris fail the reduce relocation test.
getauxval is specific to GNU libc and some other libc implementations on
Linux but sys/auxv.h is not. The bootstrap uses sys/aux.h as the only
indication for getauxval. This breaks builds on Solaris, so only make
sys/auxv.h an indicator for getauxval on linux or glibc based systems.
Solaris uses X11 so add it to the X11_SUPPORTED list.
Solaris network libraries for sockets etc are in socket and nsl.
ifreq does not have a member ifr_ifindex on Solaris, it uses
ifr_index. Add test to check if ifr_index is a member of ifreq.
The first struct in the in_addr union on solaris is defined as four
uint8_t, therefore four arguments are needed for its initializer list.
Change-Id: Ieed4c1bbac8559a7ae1db9c4e1e91f609f150270
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
contentsMargins is a Q_PROPERTY on a QLayout. Qt 6.1 introduced
QLayout::unsetContentsMargins() to reset the contents margins to the
"default" ones (that the user can't know); that's the textbook
description of a RESET function for the property.
Add some tests also for unsetContentsMargins.
[ChangeLog][QtWidgets][QLayout] The unsetContentsMargins() function now
acts as the RESET function for the contentsMargins property.
Change-Id: I463d88363c11f4a15ad3d6af71401d8698de1d41
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Extended QObjectPrivate::ExtraData to store a pointer
to its parent, and reimplemented qGetBindingStorage()
function for QObjectPrivate::ExtraData.
This allows to use Q_OBJECT_COMPAT_PROPERTY macro
for a property, stored in QObjectPrivate::ExtraData
and solves all the problems with calling a custom
setter.
Task-number: QTBUG-85520
Change-Id: I40e01c29430846359ef9160fa1ae97c702be9a18
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
No other platform needs it, so avoid building and shipping unused code.
Change-Id: I23b68b58eb0523459014df915ad8516c22adbcc1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In C++ we can give names to classes, so just use that, without
C-isms (typedef struct).
Change-Id: I27239d8d5c28864b3f4f7bd4013cc47c045b4b04
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Previously, QIODeviceBase was not visible in the documentation
and the links from QIODevice::open() were broken.
Fix by fully qualifying the arguments.
Pick-to: 6.1 6.0
Change-Id: I43960ac2ff436251cc3bfad862d82f937b9bd4b1
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Yocto apparantly enables it hard at compile time.
Change-Id: I1d4c7402eacc714859c61f469ebed85682d48b51
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
No need to spam the summary with this unsupported feature.
Pick-to: 6.1
Change-Id: Ie644a7077762d818fd62a22a8b6d3db025f92c81
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
After 7266bd459e QGLXIntegration and
QGLXContext are not defined if xcb_glx_plugin is disabled. That will
happen e.g. when gles is requested instead of desktop GL.
Protect the usage of those symbols in the xcb plugin accordingly.
Change-Id: I4bea60787fd3175450de05a8e522ef9c8b438ee7
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
We can't depend on whether the user compiles with -std=c++17 or
-std=c++20. So select what we can depend on and make that permanent.
Prior to this change:
$ cat /tmp/test.cpp
#include <QtCore/QUtf8StringView>
void f(QUtf8StringView) {}
$ qcd include
$ g++ -S -o - -I. /tmp/test.cpp | grep globl | c++filt
.globl f(QBasicUtf8StringView<false>)
$ g++ -fPIC -std=c++20 -S -o - -I. /tmp/test.cpp | grep globl | c++filt
.globl f(QBasicUtf8StringView<true>)
After this change, they're both "false". QUtf8StringView should have
been a concrete class that derived from QBsicUtf8StringView<whichever>
and inherited all its constructors. We'd cause ODR violations in C++20,
but nothing worse than what we usually do for BC reasons.
That solution is too late for Qt 6.x. Let's revisit in 7.0.
Change-Id: I6bcbe88c072a438b8b4efffd166e77199ecb39e3
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from commit c7deb3400faa1d9389137fe63ffbffade8203850)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
If parsing the standard time data brings us to the end of the zone
info, there is no DST information to use later and it makes sense to
record the zone as simply a fixed-offset zone.
At the same time, handle the case of empty name in the standard time
data; use the zone info as name rather than an empty string.
Change-Id: I34d4ea25d93d821a937949730adee89d82105bc9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A POSIX rule's transition time is allowed an hour in the range from
-137 to 137; in particular, a negative hour is allowed, and used by
some Greenland zones using Europe's time-of-transition which, as they
are more than two hours west of Greenwich, happens before midnight.
This means the time of transition can't be represented by a QTime(),
so propagate the int that represents it to the code that consumes it;
and treat parsing failure as an error rather than "correcting" it - if
the transition time is given, it must be valid.
Changed tst_QTimeZone::isTimeZoneIdAvailable()'s verification of
validity to report the name of the zone it thought was invalid.
(A later change, validating POSIX rules, caued this to fail for
America/Nuuk without the present fix.)
Change-Id: I5c9127ac34d878554dd0aca1c1c7338c7e0e1c28
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When asked to read an OffsetFromUtc record, it was trying the IANA ID
it read in as a possible zone name. If the backend accepted the given
ID as a zone name, however, the result might not be an offset-from-UTC
zone. So extend the isValid() check it was doing on the result to at
least check the zone has no DST and matches the record's offset.
Change-Id: I46a95aeb2a4d66887fd56a58fa72fe5d3b568a00
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the ID isn't even valid, don't waste cycles trying to make sense of
it as identifying a time-zone.
Add test of an invalid ID that provoked an integer overflow on trying
to parse it as a POSIX zone specification.
Fixes: QTBUG-92842
Change-Id: Ib80bbb88c11c0484ce0358acabbdc25c5bd8e0b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The recent commit 0c9fc20e7f missed the
case of a slash after some invalid character. That could lead it to
reinclude the invalid after previously working out it should ignore
it.
Change-Id: I3e29d2bf4d8df3878b581a969348ff5087b5d847
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Robert Löhning <robert.loehning@qt.io>
Add a check that setting a binding on the read-only property has no
effect, nor does trying to change its value via such a binding.
Change-Id: Id7b55cd53256961faface7ef155225664cdee97a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the final result is outside the representable range, we can only
declare the given date-time invalid.
Change-Id: Ibce09462048bf351199657a5da2c55bb3ce5b934
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
MSVC does not seem to instantiate code in the else branch of the
constexpr if statement even though the condition is true. This causes
an error if the PropertyType is void, as we then would attempt to
create an object of type void.
Work-around the issue by explicitly checking that the type is not void.
Fixes: QTBUG-92962
Change-Id: Ie5acb6fae532bcc441be34418d4724de9d65b340
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Currently, Xft.dpi from X Resources is read initially,
while changes are monitored for Xft/DPI from X Settings.
These protocols are different and can have different values.
E.g. MATE sets X Resources' Xft.dpi to 96.30859375,
while X Settings' Xft/DPI is set to 197240 at 2x scale.
This results in a very weird bug when Qt can't determine
2x scale initially, but if scale is changed at run time,
Qt changes scale to the right value.
The difference could be checked via xrdb -query and dump_xsettings
(the second is from xsettingsd project).
[ChangeLog] Qt now reads Xft/DPI from X settings at startup,
and will prefer this value over Xft.dpi from X resources.
Pick-to: 6.0 6.1 5.15
Change-Id: If6adac0c88198579332ddebc673f1524f324c0e4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
When the descent of the item is 0, ascent is the
height of the item, base(base = si.ascent)> sl.base.
At this time, sl.descent is not considered. The
calculated y value may be <0.
Fixes: QTBUG-86823
Fixes: QTBUG-92468
Pick-to: 5.15 6.0 6.1
Change-Id: I9cf088dec9162595e52ff72aa90ec3153a30fb72
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Similar fix as 538e9fa568 : gcc 7.5,
used e.g. on Jetson, is not able to resolve the add_overflow overload
without help.
Change-Id: I4d497480bb8dc82d7b1cbd13fda8e291935c8752
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this change, QXmlStreamReader prefix value was always an empty
string for EndElement when the documentation state : "Returns the prefix
of a StartElement or EndElement."
The error was a missing update of the prefix value when parsing
EndElement.
I updated the tests data which were also wrong because no prefix were
reported even for </a:foo>. No new test is necessary, I think, the test
data already cover the cases of EndElement with a prefix and without one
(unchanged here).
Fixes: QTBUG-86847
Pick-to: 5.15 6.0 6.1
Change-Id: I0ad38b9741d760f1ce688a36f969ec14e20a928c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The set values didn't match tested values, as the enum were already
on flag form.
Pick-to: 6.1 6.0 5.15
Change-Id: I9e8b0d419682122e8d40cd47bd68d840386c2066
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As discussed in the related bug report, the current way proxy models
access the parent-child hierarchy of the source model requires modifying
Qt sources. This changes adds a method to allow easy implementation
of this common feature to proxy model subclasses.
Fixes: QTBUG-83911
Change-Id: Ic88d40c13c2be7b6b44fcc58118bac471a11da95
Reviewed-by: David Faure <david.faure@kdab.com>
When rows are removed from a model with no columns,
the test should not report a problem if indexes are invalid
Fixes: QTBUG-92886
Pick-to: 6.1 6.0 5.15
Change-Id: I7a042dfdb2575f87208a00cbed13db3869807f84
Reviewed-by: David Faure <david.faure@kdab.com>
Add an iOS specific plist file like we do for macOS.
If the user hasn't specified a bundle identifier or a development
team id, do what qmake does and query the Xcode preferences file to
pre-populate those if possible.
This allows running
cmake -GXcode ./foo
on a Qt example project and building it with xcodebuild on the
command line without having to go through the IDE to set a development
team id or modifying the example project to add a product
bundle identifier.
Note that the change assumes that the development team id has been
previously set / configured via Xcode. If no such id is found, then
the value will not be set and the user will still have to specify it
either in the project file or via the Xcode UI after the project
has been generated.
Amends 3a2fa3fec5
Pick-to: 6.1
Change-Id: Iaab4e57de72c9877fb9035d28f9a879b2c91a33c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Xcode allows building a project targeting either the device or
simulator sysroot in one single build dir, but for the sysroot
switching to work there should be no linker or compiler flags
referencing absolute paths of a specific sysroot.
During CMake configuration of a project targeting iOS, all found
system libraries will be within one single sysroot, either the device
one or the simulator one, whichever one was passed to
CMAKE_OSX_SYSROOT. CMake will then generate the Xcode project
and pass those absolute paths, which makes sysroot switching within
Xcode not work.
To avoid that, the CMake documentation recommends passing linker and
framework flags of the form '-lfoo' and '-framework bar' instead of
absolute paths. Xcode then takes care of setting the correct framework
search path.
Zlib is one of the libraries found in the iOS sysroot and thus passed
as absolute path.
To avoid that, create a new FindWrapZLIB find script. The target it
creates will pass the absolute path to the library on non Apple
platforms and an -lz linker flag on Apple platforms (macOS and iOS).
To avoid issues with target global promotion when system PNG package
is found, ensure that a found ZLIB::ZLIB target is promoted to global
manually in src/gui/configure.cmake.
Pick-to: 6.1
Change-Id: I8bd8649be4f680a331ad51925f27cb9d13ac5e5f
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Add an #include for a header that was only accidentally included
transitively.
Pick-to: 5.15 6.0 6.1
Task-number: QTBUG-92822
Change-Id: Ie29bb0e065f2db712e9cf9539b15124ff0ced349
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
There is only one property in QSequentialAnimationGroup,
currentAnimation.
This patch ports this property to the new property system
Task-number: QTBUG-85520
Change-Id: Id528d30f551e88a6165bbb6a3c09d44e89257de5
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Port watchMode in QDBusServiceWatcher to the new property
system. This is the easiest part.
Task-number: QTBUG-85520
Change-Id: I588212af205e77765862b8fecdbdcbf871717142
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The engine pointer is guaranteed to be initialized in line 1838, so we
can assert that the correct value is passed into the function to fix
static analyzer warning 1d9b8ce922ee0891fb0d477dc17fdb8d.
Change-Id: I773bbaa579afec0d7a79d4393ee66fd26ba9629b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Jonas Karlsson <jonas.karlsson@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Various checks for "engine" in the previous code suggested that
engine might be nullptr by the time we want to populate the
out-parameters.
This must not be the case, and QFontDatabase::load asserts
already that a valid engine is loaded and returned.
Fix static analyzer warning 7f68daa282c72e8cc172c681eb02f559 by
asserting it here as well.
As a drive-by, change the tested out-parameter to the last one
in the list of optional parameters.
Pick-to: 6.1
Change-Id: I3d9ff0f5f7c4740014301c073480d14fef54e2fb
Reviewed-by: Jonas Karlsson <jonas.karlsson@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Fabian Kosmale
Tapio Oksa
Samuel Gaist
Ilya Fedin
Eirik Aavitsland
Allan Sandfeld Jensen
Niclas Rosenvik
Giuseppe D'Angelo
Ivan Solovev
Alexandru Croitor
Robert Löhning
Friedemann Kleint
Kai Köhne
Thiago Macieira
Edward Welbourne
Sona Kurazyan
Andreas Buhr
Tang Haixiang
Vincent Baijot
Shawn Rutledge
Luca Beldi
Volker Hilsheimer