Not following redirects is not a feature, but just a hastle for everyone.
The main issue with switching this default is that applications that
actually do manual redirect handling will break in various ways.
FollowRedirectsAttribute was removed as it no longer serves any
purpose beyond duplicating the default value.
[ChangeLog][Network] QNetworkAccessManager now follows redirects by
default with the NoLessSafeRedirectPolicy.
[ChangeLog][Potentially Source-Incompatible Changes]
QNetworkRequest::FollowRedirectsAttribute was removed and has been
superseded by QNetworkRequest::RedirectsPolicyAttribute
Fixes: QTBUG-85901
Change-Id: Ic5b776180a4b84ac4fc895158bb5a66a3c91a042
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If we ask for HTTP/2 or 1.1 and the server doesn't list either then we
should still try to connect using HTTP/1(.1) just in case, to keep
compatibility.
Task-number: QTBUG-85902
Change-Id: I6ff2e38ac9d767e482a19ee4c81d101be37d3fab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This seems to only be happening when we have a single channel because
otherwise it will try IPv4 in one channel and IPv6 in the second.
Change-Id: I0d513e25fefffeabfc733e895827aa12da335ef9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The user-agent should be propagated to the proxy as well or else we
get our default one.
Change-Id: Id2283a8f2ade1a32f7fcf3d691be8d380d334b50
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In some cases (i.e. with SOCKS) we don't have a HTTP/2 request ready
yet so it would just error out.
Change-Id: I6449de5fb52f5208d5641062c5906c3baff18b77
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In that case we haven't created the h2 handler yet, so it will
crash when trying to access various members.
Task-number: QTBUG-85902
Change-Id: Id0699ff06ef67748a16622703f731db0b0867771
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Before the introduction of QDecompressHelper gzip was preferred over
deflate. The change seems to be accidental. Amends commit
7b76379a89.
Change-Id: I70f33d551912465d63f49ea3db1ac3575d19a92d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QIODevice::skip() called a virtual QIODevicePrivate::skip() to
implement an efficient skipping on I/O devices for the internal
subclasses. The user subclasses cannot inherit QIODevicePrivate, so
this functionality was not externally accessible.
This patch replaces QIODevicePrivate::skip() with a virtual protected
QIODevice::skipData(). While the basic implementation simply discards
the data by reading into a dummy buffer, users can reimplement this
function to improve the performance in their subclasses.
[ChangeLog][QtCore][QIODevice] Added virtual protected skipData().
Now, subclasses can implement device-specific skipping of data.
Change-Id: I9522f7f7ab9d03ac06e972a525f8ec2fa909a617
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Currently it is possible to compare a QSslError with a
QSslError::SslError because QSslError has an implicit
constructor. But the comparison often fails because
a QSslError received from the system contains a
certificate.
[ChangeLog][QtNetwork][QSslError] The constructor
QSslError(QSslError::SslError error) is now explicit.
Change-Id: I36cc5895245d3b43ab4b8d65a9635893d6b0e6a4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Changes are not too big for now. Just replaces use of the previous
calls to the zlib decompression function. And initialize
QDecompressHelper when we know the content-encoding.
Task-number: QTBUG-83269
Change-Id: I41358feaef2e7ac5f48f14e3f95ec094e0c110b7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Some servers have an upper limit on how many times a nonce can be
reused. Because the nc was not being reset the server would get a
high nc and would close the connection.
Change-Id: I71d5a316f79777a45c7323d93e28b3845aefcfad
Original-patch-by: Benjamin Reikowski
Pick-to: 5.15
Fixes: QTBUG-85729
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
To support streaming decompression in QNAM.
Will also be used to refactor existing decompression code in QNAM.
Task-number: QTBUG-83269
Change-Id: Iecf3e359734163f15686c949f75d41fa4794a00e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have several classes inheriting QObject (directly or not) and disabling
copy (thus non-movable implicitly). Let's make them non-movable explicitly
now.
Change-Id: I509a066e9977480b30842afef26319b8afec6001
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This amends 0ef46b41d8 to ensure the
new configuration is styled correctly for qmake.
Task-number: QTBUG-80938
Change-Id: Iebfff3ff0570d2e92d01d4eb1178c0d6261468f9
Pick-to: 5.15
Reviewed-by: Lars Schmertmann <lars.schmertmann@governikus.de>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
WebAssembly does not need the http feature, but these functions were
hidden behind that feature.
Fixes: QTBUG-83867
Pick-to: 5.15
Change-Id: I7cd9aa73003f45ccbc2613c67c21e4067d6edddd
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The CA fetcher on Windows works on a separate thread, it can take
quite some time to finish its job and if a connection was meanwhile
closed (via 'abort', 'close' or 'disconnectFromHost') but the socket
is still alive/re-used - we don't want to be fooled by the previous
fetch 'finished' signal, only if it's fetching for the same certificate.
Change-Id: Ibd0a70000ad10cff10207d37d7b47c38e615d0f1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Also, remove the deprecated function and its auto-test.
Change-Id: If04a54c4b91e0f76523960c7b1a5bcb8fe883ac6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a first call to ::WSASend() consumes less data than requested, we
are trying to make a second call, leaving 'bytesToSend' unmodified.
Instead of setting a new value for 'bytesToSend', it seems reasonable
to break the loop, if the system buffer overflow detected.
Pick-to: 5.15
Change-Id: I8038e95c20221518955efe786f2d0dadb98360fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractSocket::flush stopped being virtual and, instead, QAbstractSocketPrivate::flush
is now virtual. So the code in QSslSocket is essentially a duplicate.
Change-Id: Iebb33c8490268270b90a662ab64b1ae47c4cbac7
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If QSslConfiguration::setCaCertificates is set to empty list openssl
cannot verify the OCSP-Response.
Qt will provide it as QSslError::OcspResponseCannotBeTrusted that can be
ignored. But the openssl error is still in the error queue and prevents
a successful reply in QNetworkReply::finished.
So let's clear the queue after OCSP checking to avoid side affects.
Change-Id: I44a7f45a2eebd20ea86a235a0534f80986c40a26
Fixes: QTBUG-85638
Pick-to: 5.15
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
OpenSSL 1.1.1 has a convenient function for parsing ASN.1 times;
use that instead of the hand-rolled code.
Change-Id: Ic0aecc915f362c02b220819305f3f3c347a75297
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Certain resources and compiled jar files have to be copied into the
non-prefix build dir location. They were previously only installed,
which doesn't do anything in a non-prefix build.
Change pro2cmake to generate code that places the compiled java
jars into QT_BUILD_DIR, so that non-prefix builds work.
Place the module dependencies xml files into lib folder in non-prefix
builds.
Don't special case the output and install location of the Android QPA
plugin.
Task-number: QTBUG-85399
Change-Id: I4ac9d3929ea8ecc95ec99a77e621ad2121b68832
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The change creates a slight source incompatibility. The main
things to take care of are
* code using printf statements on list.size(). Using qsizetype in
printf statements will always require a cast to work on both 32
and 64 bit.
* A few places where overloads now get ambiguous. One example is
QRandomGenerator::bounded() that has overloads for int, uint and
double, but not int64.
* Streaming list.size() to a QDataStream will change the format
depending on the architecture.
[ChangeLog][QtCore][QList] QList now uses qsizetype to index into
elements.
Change-Id: Iaff562a4d072b97f458417b670f95971bd47cbc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
CFURLStringByAddingXXX was deprecated, so we use QUrl combined
with existing QString-based converters (from/to CFStringRef).
Pick-to: 5.15
Task-number: QTBUG-83992
Change-Id: I6f1a3fdafa9532bb7816a1262169df3421169cb7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also add a ; where it is missing.
Task-number: QTBUG-82978
Change-Id: Ic5d2a07363c25ab641d234baca89bc62238458cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
No client of QDateTimeParser actually uses it unless datestring was
enabled, nor is it any use without datestring. Various methods
conditioned on datestring are broken unless datetimeparser is enabled.
We can't condition public API on datetimeparser, as it's a private
feature, but client code can condition use of it on the private
feature. All string-to-date/time conversions that use a string format
(this includes all locale-specific formats) depend on feature
datetimeparser.
Change #if-ery (or add it) in all client (including test) code to test
the right feature.
Tidied up some code in the process. Killed some already-redundant
textdate #if-ery. Renamed a test whose name claimed it involved
locale, which it doesn't, in the course of #if-ing it.
This simplifies the condition for feature datetimeedit (which overtly
depended on textdate, redundantly since it depends on datestring which
depends on textdate; its dependence on datetimeparser now makes its
dependency on datestring also redundant).
It also removes the need for assorted datestring checks in
QDateTimeParser itself.
Change-Id: I5dfe3a977042134b2cfb16cbcc795070634e7adf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We had such an overloaded version in QSslSocket, it was deprecated without
providing any alternative. Now this function has some use and may be
introduced in Qt6, as QSslConfiguration::setCiphers(const QString &).
Last but not the least - a useless and strange auto-test was removed
(it was creating a list of 5 QSslCiphers each with isNull() == true).
That's becasue '!MD5' or 'ALL' (for example) is not a cipher to be found
in supportedCiphers.
Change-Id: I47eb4c0faa9b52885e883751dd992cd9cb3d26fe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Not to pollute the global namespace with rather generic names
(especially in case QT_NAMESPACE is none); also drop the
(now)redundant 'Q' prefix in the names.
Change-Id: I57ea7e3996cced705f7ddbdbc1e0231191b31c43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Closing it early means the user may get this message when reading data
without checking for error:
'QIODevice::read (QNetworkReplyWasmImpl): device not open'
Change-Id: I377fc3da68e9d9f14f8504ace5addbb4f8e3c539
Fixes: QTBUG-85176
Pick-to: 5.15
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Remove quote character, fixing:
Performing C++ SOURCE FILE Test HAVE_openssl_headers succeeded with the following output:
Run Build Command(s)
src.cxx 8 88: warning: missing terminating ' character
8 | # error OpenSSL was reported as >= 1.1.1 but is missing required features, possibly it's libressl which is unsupported
which makes one think the test failed.
Change-Id: I0ac02deee4282ef7c953186b820a31309e82b5e1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
LibResolv uses a QLibrary which is a QObject that must be deleted
if the QCoreApplication is being destroyed to release the underlying library.
A Q_GLOBAL_STATIC won't release any memory and is not able to
manually release it.
Pick-to: 5.15
Task-number: QTBUG-84234
Change-Id: I97fe5faca309e9c1e85435f602ad7f8c3f633b48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QHostInfoLookupManager has a QThreadPool as member.
QThreadPool is a QObject and must be deleted if the QCoreApplication
is being destroyed to release the underlying ThreadData.
A Q_GLOBAL_STATIC won't release any memory is not able to
manually release it.
Pick-to: 5.15
Task-number: QTBUG-84234
Change-Id: I96be4601c3af38fa7c753a6f7acb8273ee277a27
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Requires moving construction and destruction of the IConnectionPoint
(contained in QNetworkListManagerEvents contained in
QNetworkStatusMonitorPrivate) and the calls to CoInitialize and
CoUninitialize to start()/stop() so it can be taken down
and brought up in a reasonable way.
Partial squashed cherry pick of bde6b27882143acbafa8c0b2e8055c3808ae3dd4
and the following fixup patch 84be436ef0f8253af87cdd2742858107e54c228b.
Task-number: QTBUG-84031
Change-Id: I9d644261c6c730ea511e28d75da91bd34504bd03
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit bde6b27882143acbafa8c0b2e8055c3808ae3dd4)
(cherry picked from commit 84be436ef0f8253af87cdd2742858107e54c228b)
They were deprecated with replacements in QSslConfiguration proposed (and
some without alternative, which we'll provide if there is any demand
in such an API). Special thanks to M.N. for a nice hint on how to
amend the test without introducing a new API.
Change-Id: I7841a5b3f30469d8204b61cb65921c34275e0650
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And name the main class QList. That's also the one we document.
This gives less porting pain for our users, and a lot less churn
in our API, as we use QList in Qt 5 in 95% of our API.
In addition, it gives more consistent naming with QStringList and
QByteArrayList and disambiguates QList vs QVector(2|3|4)D.
Fixes: QTBUG-84468
Change-Id: I3cba9d1d3179969d8bf9320b31be2230d021d1a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Frederik Gladhorn
Mårten Nordheim
Ulf Hermann
Alex Trotsenko
Lars Schmertmann
Timur Pocheptsov
Andy Shaw
Allan Sandfeld Jensen
Alexandru Croitor
Lorn Potter
André Klitzing
Giuseppe D'Angelo
Tor Arne Vestbø
Lars Knoll
Edward Welbourne
Nico Vertriest
Friedemann Kleint
Jarek Kobus
Mike Achtelik