Some goals that have hopefully been achieved are:
- make QPointerEvent and QEventPoint resemble their Qt Quick
counterparts to such an extent that we can remove those wrappers
and go back to delivering the original events in Qt Quick
- make QEventPoint much smaller than QTouchEvent::TouchPoint, with no pimpl
- remove most public setters
- reduce the usage of complex constructors that take many arguments
- don't repeat ourselves: move accessors and storage upwards
rather than having redundant ones in subclasses
- standardize the set of accessors in QPointerEvent
- maintain source compatibility as much as possible: do not require
modifying event-handling code in any QWidget subclass
To avoid public setters we now introduce a few QMutable* subclasses.
This is a bit like the Builder pattern except that it doesn't involve
constructing a separate disposable object: the main event type can be
cast to the mutable type at any time to enable modifications, iff the
code is linked with gui-private. Therefore event classes can have
less-"complete" constructors, because internal Qt code can use setters
the same way it could use the ones in QTouchEvent before; and the event
classes don't need many friends. Even some read-accessors can be kept
private unless we are sure we want to expose them.
Task-number: QTBUG-46266
Fixes: QTBUG-72173
Change-Id: I740e4e40165b7bc41223d38b200bbc2b403e07b6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Task-number: QTBUG-83255
Change-Id: Ia1c6a49af6be4aaa6b988537c38db3a2c0a646a5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
There's no real dependency to QTextCodec in those files anymore.
Change-Id: Ifaf19ab554fd108fa26095db4e2bd4a3e9ea427f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes:
evdevkeyboard/qevdevkeyboardhandler.cpp: In member function ‘void QEvdevKeyboardHandler::switchLed(int, bool)’:
evdevkeyboard/qevdevkeyboardhandler.cpp:153:28: error: ‘struct input_event’ has no member named ‘time’; did you mean ‘type’?
::gettimeofday(&led_ie.time, 0);
^~~~
type
Task-number: QTBUG-84012
Change-Id: I1d127561e0406ae570da656d3e31f9434c7b8798
Pick-to: 5.15
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Fixes:
evdevtouch/qevdevtouchhandler.cpp: In member function ‘void QEvdevTouchScreenData::processInputEvent(input_event*)’:
evdevtouch/qevdevtouchhandler.cpp:579:29: error: ‘struct input_event’ has no member named ‘time’; did you mean ‘type’?
m_timeStamp = data->time.tv_sec + data->time.tv_usec / 1000000.0;
^~~~
type
evdevtouch/qevdevtouchhandler.cpp:579:49: error: ‘struct input_event’ has no member named ‘time’; did you mean ‘type’?
m_timeStamp = data->time.tv_sec + data->time.tv_usec / 1000000.0;
^~~~
type
Task-number: QTBUG-84012
Change-Id: Ib8d726a0baf2bdc85da9341229fffaddc0e373ee
Pick-to: 5.15
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
They come in as a different relative axis, and we need to ignore the old
axis to not scroll double.
Change-Id: I808cce95417ec9f8058dee26d0a2694dda27944d
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
QHash::erase() in the new QHash will invalidate
all iterators pointing into the hash.
Change-Id: Ia54e8485a947cd7274f832c7c8c624d0aaded4ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Takes care of the first round of todos and deprecations for Qt6 in
qevent.
Not touching anything that might interfere with changing the class
hierarchy as the file also suggest.
Change-Id: If72d63d8932f1af588785bf77b34532358639a63
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
To be feature parity with evdev touch which already supports this
Change-Id: Ie7f9c868ea888725b24c3855106e1c0c0ba943a9
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Move away from using 0 as pointer literal.
Done using clang-tidy. This is not complete as
run-clang-tidy can't handle all of qtbase in one go.
Change-Id: I1076a21f32aac0dab078af6f175f7508145eece0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends qtbase/af2daafde72db02454d24b7d691aa6861525ab99.
Where applicable, port over to member initialization, thus also
fixing nullptr warnings.
Change-Id: Iaaf2dbbbcf2952253390b8839fd15a1b17be32c0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Having a platform with Texas Instruments's ADS7846 touch screen controller (NXP
i.MX6 DualLite SoC) and a LOGIC Technologies Inc. LTTD800x480 L2RT 7" (800x480
pixels) TFT LCD panel attached to it (resistive touch) using Linux v5.2.17 and
libinput-1.12.6 a single one finger touch starts with a LIBINPUT_EVENT_TOUCH_
DOWN directly followed by a LIBINPUT_EVENT_TOUCH_MOTION both having the same
touch position.
Now Qt's code for touch input processing compressed both into one touch point
with state Qt::TouchPointStationary which resulted in QGuiApplicationPrivate::
processTouchEvent() seeing no touch points with state Qt::TouchPointPressed
anymore. As a consequence processTouchEvent()'s local container windowsNeeding-
Events stayed empty and the whole touch frame was skipped.
Fix this by still compressing into one touch point, but keeping its state as
Qt::TouchPointPressed.
Fixes: QTBUG-79212
Change-Id: Ia571d79ec5c1d6143e923ed69b378503b53e5992
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
When this was refactored in 3bc10fb9bb to use unique pointers, a move was
added before the connection, so it would essentially always try to connect a
nullptr.
Change-Id: Iab7fce88bc73afd78e6b63ffaef7358f3f4ce7e3
Reviewed-by: Rainer Keller <Rainer.Keller@qt.io>
The xcb platform plugin uses this category for detailed input event
logging, so we might as well be consistent in evdevtouch. When hardware
supports pressure sensing, it's likely to need extra debugging.
Task-number: QTBUG-77142
Change-Id: I7682bb5d49e669054523f9cf556715e511bcd572
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This introduces a dependency on ts_get_eventpath(), which is only
available in tslib 1.15 and newer. This raises the required version to
an unneeded level, so just drop the debug message if the API is not
available.
Change-Id: I4a1cd7abec8d139e70555506d9d21edacf0f4d71
Fixes: QTBUG-78867
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Some modules define their own manually-maintained lists, and we can rely
on the headers generated by each module to include in the pch as well
e.g. QtCore/QtCore.
There's also e.g. QtWidgetDepends for QtWidgets, but this only
works for modules, not for tools, examples or other applications.
For now we'll use the Qt<Module>/Qt<Module> headers for the
modules we depend on.
Building with PCH can be disabled with -DBUILD_WITH_PCH=NO, and it only
works for versions of CMake newer than 3.15.20190829.
Change-Id: Iae52bd69acfdfd58f4cd20d3cfa3c7f42775f732
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As a rule, we don't deliver touch events containing only stationary
touchpoints. To fix QTBUG-52510 we added an exception in
1bd0ab7050 : if the velocity changed,
deliver it anyway. Now we need to do the same if the pressure changed.
Also, on the customer's hardware, pressure is indicated via ABS_MT_PRESSURE.
Change-Id: If7f7088df055d686cdd86967b999e38024f8170f
Fixes: QTBUG-77142
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Conflicts:
configure.pri
Also required s/solid\.color/solidColor/ in a couple of places in:
src/gui/painting/qpaintengine_raster.cpp
Change-Id: I29937f63e9779deb6dac7ae77e2948d06ebc0319
QChar currently is convertible from nearly every integral type. This
is bad code hygiene and should be fixed come Qt 6.
The present patch is the result of compile fixes from marking these
constructors explicit. As is clear from the distribution of fixes,
only low-level string handling code used these implicit conversions,
an indication that they're not in widespread use elsewhere.
Change-Id: Ief5336f21e6d181e03ab92893b3d13a14adc7cb0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Implicit capture of 'this' in [=] is deprecated in C++20.
Fix by using explicit captures.
Change-Id: I1633446f4670202b0d1aca938d8c27dbc0c1411e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Generate a pri file for public and private interfaces, but map CONFIG +=
internal_module to a cmake option and skip the former if set.
Task-number: QTBUG-75666
Change-Id: I3f4baf1277094f4c22149a9e8769734baf9a235f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Extra difficulty: the lock is conditional. Not a problem with std::unique_lock, which is movable.
Change-Id: Ib5515838ccb10100d5aa31163ab7f171591c04c4
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This change introduces a new function called qt_find_package()
which can take an extra option called PROVIDED_TARGETS, which
associates targets with the package that defines those targets.
This is done by setting the INTERFACE_QT_PACKAGE_NAME and
INTERFACE_QT_PACKAGE_VERSION properties on the imported targets.
This information allows us to generate appropriate find_dependency()
calls in a module's Config file for third party libraries.
For example when an application links against QtCore, it should also
link against zlib and atomic libraries. In order to do that, the
library locations first have to be found by CMake. This is achieved by
embedding find_dependency(ZLIB) and find_dependency(Atomic) in
Qt5CoreDependencies.cmake which is included by Qt5CoreConfig.cmake.
The latter is picked up when an application project contains
find_package(Qt5Core), and thus all linking dependencies are resolved.
The information 'which package provides which targets' is contained
in the python json2cmake conversion script. The generated output of
the script contains qt_find_package() calls that represent that
information.
The Qt5CoreDependencies.cmake file and which which dependencies it
contains is generated at the QtPostProcess stop.
Note that for non-static Qt builds, we only need to propagate public
3rd party libraries. For static builds, we need all third party
libraries.
In order for the INTERFACE_QT_PACKAGE_NAME property to be read in any
scope, the targets on which the property is set, have to be GLOBAL.
Also for applications and other modules to find all required third
party libraries, we have to install all our custom Find modules, and
make sure they define INTERFACE IMPORTED libraries, and not just
IMPORTED libraries.
Change-Id: I694d6e32d05b96d5e241df0156fc79d0029426aa
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Shawn Rutledge
Lars Schmertmann
Jarek Kobus
Friedemann Kleint
Lars Knoll
Alexander Volkov
Peter Seiderer
Qt Forward Merge Bot
Allan Sandfeld Jensen
Alexandru Croitor
Leander Beernaert
Liang Qi
Pasi Petäjäjärvi
Ulrich Ölmann
Johan Klokkhammer Helsing
Rolf Eike Beer
Joerg Bornemann
Mårten Nordheim
Marc Mutz
Simon Hausmann