The refactoring for adding the DirectWrite font database broke
disabling this feature, which in turn broke compilation with CMake,
since the configure test isn't added there yet.
Change-Id: I7727145112df7f1009a09f09bf3368645fb1b5da
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
A typo in the conversion between DirectWrite stretch and Qt stretch
caused all unstretched fonts to be registered as ultra-condensed.
Change-Id: I2ec64fcef44cc6259946b761a7bfac0ce191971e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Adds an opt-in experimental DirectWrite-based font database.
This cannot be the 100% replacement for GDI unfortunately, since
quite a few font formats used on Windows are still unsupported.
But it would be good to have it as an opt-in experimental feature
since it should make it easier to solve multiple font selection
issues we have on Windows.
In order to still share the DirectWrite-specific code between
the old and new database, this introduces a common base class.
Note that the feature depends on DirectWrite 3 support (Windows 10).
Fixes: QTBUG-74917
Change-Id: Ida08ec7ef4fda9fc78622ca4297909a727390a64
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QPlatformBackingStore had a dependency on the QOpenGLTextureBlitter, which is a
problem because we want to get rid of all the public QOpenGL* classes in the
gui module.
This splits the heavily QOpenGL dependent parts of the backing store
implementation into a separate class and moves it to the platformcompositor
module.
qplatformbackingstore.cpp is now mostly free from OpenGL implementation
details.
Platform integrations now have to explicitly request backing store OpenGL
support. This has been done for:
- xcb
- windows
- cocoa
- winrt
- android
- wasm
- ios
QPlatformGraphicsBufferHelper::lockAndBindToTexture is now exported so it can
be used from other modules.
Task-number: QTBUG-74409
Change-Id: I42ad9250e5a424939cf751a8ad880c7381ede2ae
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This flag has been deprecated, but until we remove it completely
we need to continue supporting it, so we just suppress the warnings
for now.
Change-Id: I464e1cce42f78af76d46ec12eeb3e8d53d64d6a3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When rendering the glyphs into the texture, we need to translate
by the margins (this is accounted for later). The visible
symptom for this was that when the DirectWrite engine was used
all glyphs would be two pixels to the left (which could be seen
when placing a cursor at the glyph for instance, and sometimes
the edge of the glyph was clipped).
Change-Id: Ife72ae8b5663cf43448ae0f8323a459210609b4d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
If available, use a C++17 std::pmr::unordered_set with a monotonic
buffer resource and a 256-byte stack buffer to avoid the per-element
allocations of QSet.
Results on my machine:
RESULT : tst_QStringList::removeDuplicates():"empty":
- 0.00014 msecs per iteration (total: 74, iterations: 524288)
+ 0.000031 msecs per iteration (total: 66, iterations: 2097152)
RESULT : tst_QStringList::removeDuplicates():"short-dup-0.00":
- 0.00043 msecs per iteration (total: 57, iterations: 131072)
+ 0.00013 msecs per iteration (total: 69, iterations: 524288)
RESULT : tst_QStringList::removeDuplicates():"short-dup-0.50":
- 0.00049 msecs per iteration (total: 65, iterations: 131072)
+ 0.00032 msecs per iteration (total: 85, iterations: 262144)
RESULT : tst_QStringList::removeDuplicates():"short-dup-0.66":
- 0.00057 msecs per iteration (total: 75, iterations: 131072)
+ 0.00039 msecs per iteration (total: 52, iterations: 131072)
RESULT : tst_QStringList::removeDuplicates():"short-dup-0.75":
- 0.00064 msecs per iteration (total: 85, iterations: 131072)
+ 0.00048 msecs per iteration (total: 63, iterations: 131072)
RESULT : tst_QStringList::removeDuplicates():"long-dup-0.00":
- 0.083 msecs per iteration (total: 85, iterations: 1024)
+ 0.039 msecs per iteration (total: 80, iterations: 2048)
RESULT : tst_QStringList::removeDuplicates():"long-dup-0.50":
- 0.11 msecs per iteration (total: 58, iterations: 512)
+ 0.078 msecs per iteration (total: 80, iterations: 1024)
RESULT : tst_QStringList::removeDuplicates():"long-dup-0.66":
- 0.13 msecs per iteration (total: 70, iterations: 512)
+ 0.10 msecs per iteration (total: 53, iterations: 512)
RESULT : tst_QStringList::removeDuplicates():"long-dup-0.75":
- 0.16 msecs per iteration (total: 86, iterations: 512)
+ 0.13 msecs per iteration (total: 69, iterations: 512)
When interpreting the data, take into account that each iteration
contains _also_ a deep copy of the QStringList d/t the detach from
'input'.
The pattern is used elsewhere in Qt, so I've put the class that
implements the seen set into a private header file and used in some
other places I found.
Change-Id: I1f71a82008a16d5a3818f91f290ade21d837805e
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
I made a clazy automated check that replaced the use of QVariant::Type
by the equivalent in QMetaType.
This has been deprecated since Qt 5.0, but many uses were not yet removed.
In addition, there was some manual changes to fix the compilation errors.
Adapted the Private API of QDateTimeParser and QMimeDataPrivate
and adjust QDateTimeEdit and QSpinBox.
QVariant(QVariant::Invalid) in qstylesheet made no sense.
But note that in QVariant::save, we actually wanted to use the non-user type.
In the SQL module, many changes were actually reverted because the API
still expects QVarient::Type.
Change-Id: I98c368490e4ee465ed3a3b63bda8b8eaa50ea67e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Clang does seem to understand __declspec(nothrow) as
used by the COM macros like STDMETHOD. Suppress the warning,
fixing errors like:
qwindowsfontenginedirectwrite.cpp(105,24): error: 'AddBeziers' is missing exception specification '__attribute__((nothrow))' [-Werror,-Wmicrosoft-exception-spec]
Task-number: QTBUG-63512
Change-Id: If582cb0c12c62a7d12c4ae702747aac1f735db3c
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
To be feature parity with evdev touch which already supports this
Change-Id: Ie7f9c868ea888725b24c3855106e1c0c0ba943a9
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
...not the connector. Passing the connector id to drmModeGetEncoder()
is clearly an oversight.
Task-number: QTBUG-80976
Change-Id: I80a6088fca558d1637bd01b0aca8c4a8ba3b25f5
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QT_VULKAN_INSTANCE_EXTENSIONS to specify additional
instance extensions.
QT_VULKAN_INSTANCE_LAYERS to specify additional
instance layers.
QT_VULKAN_DEVICE_EXTENSIONS to specify additional
device extensions.
These will apply to all QVulkanWindows and everything
that uses RHI, including Qt Quick with the Vulkan RHI
backend.
Task-number: QTBUG-80499
Change-Id: I912495affa987d62a9823d55d06d6a8209f6adc6
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Conflicts:
src/corelib/tools/qvector.h
Make QVector(DataPointer dd) public to be able to properly merge
5b4b437b30 from 5.15 into dev.
src/widgets/kernel/qapplication.cpp
tests/auto/tools/moc/allmocs_baseline_in.json
Done-With: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Change-Id: I929ba7c036d570382d0454c2c75f6f0d96ddbc01
If a font does not set the "bold" flag in its OS/2 table, we check
the weight from the same table to determine whether it is bold or
if we have to embolden it synthetically. But the actual definition of
bold in OS/2 is 700 (which is also what QFont::Bold is documented
to correspond to in qfont.h).
The result was that we would embolden fonts with bold weight if
the bold flag was not set. An example of such a font was the
CJK JP family of Noto Sans.
[ChangeLog][Text] Fixed a problem where certain bold fonts would be
synthetically emboldened by Qt when using the Freetype font engine.
Fixes: QTBUG-80866
Change-Id: I2133d9c44a9e19c0f5f216a649ec64388245d34f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When fetching the bounding box of the alphamap for the glyph cache,
we would include the margins in the size, but we would not account for
it in the origin. We would therefore get a mismatch when copying the
alpha map into the cache.
[ChangeLog][Windows] Fixed a 2 pixel offset on glyphs when using
color fonts or any hinting preference other than the default (full)
hinting.
Fixes: QTBUG-71928
Change-Id: I9287df02de4f6e79c3b6c5ce92b73c284261ef5c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Move away from using 0 as pointer literal.
Done using clang-tidy. This is not complete as
run-clang-tidy can't handle all of qtbase in one go.
Change-Id: I1076a21f32aac0dab078af6f175f7508145eece0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The code was initially introduced in
9204b8c31e but getting the names were
conditioned on whether or not Windows identified it as a truetype font.
This excluded cases which had preferred names embedded but was not
truetype fonts. To fix that we run the code unconditionally.
[ChangeLog][Windows] Fixed a bug where some fonts would not be
accessible by referencing their typographic name.
Fixes: QTBUG-78556
Change-Id: I8823684b09cce3b1b8722b1e609a5bb49b13da13
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
We introduced a work-around for iOS 11 which breaks on more
recent OS versions because we try to request meta-fonts by
name instead of using the special system font descriptors.
This would cause warnings on the console and Times New Roman
when requesting e.g. the system fixed width font.
When testing on iOS 12 without the work-around, we are no
longer able to reproduce the original issue, so the
assumption is that this problem has been resolved. Since
iOS 11 is not a supported target for Qt 5.14 we can remove
the work-around entirely.
[ChangeLog][macOS/iOS] Fixed a bug where QFontDatabase::systemFont()
would return the wrong fonts on macOS 10.15 and iOS 13.
Fixes: QTBUG-79900
Change-Id: Ie375c8c2ab877d6d66e3696662c4939f639a6e9e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since a34e81ab [1], 'xkbcommon_support' is under
'src/platformsupport/input', and will not be defined when building
with -no-libinput, and as such, 'xkbcommon_support-private' added in
'src/plugins/platforms/xcb/xcb_qpa_lib.pro' will be unknown.
1. https://code.qt.io/cgit/qt/qtbase.git/commit/?h=5.14&id=a34e81ab
Change-Id: I79563b329623651b462b8fedcfb59ef5f2c2e52a
Gentoo-bug: https://bugs.gentoo.org/699110
Suggested-by: Petr Zima <zima@matfyz.cz>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Amends qtbase/af2daafde72db02454d24b7d691aa6861525ab99.
Where applicable, port over to member initialization, thus also
fixing nullptr warnings.
Change-Id: Iaaf2dbbbcf2952253390b8839fd15a1b17be32c0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
...if the feature is enabled.
This fixes the build for MSYS2 with fontconfig.
Fixes: QTBUG-79748
Change-Id: I2c834b6d968766f98c5df2f3df5c8c9bdbd80f11
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The atomic modesetting support was not prepared for page flips being
issued from different (per-screen) threads.
This could be seen with the threaded render loop of Qt Quick: having a
QQuickWindow per screen means having a dedicated render thread for each
screen. QKmsDevice used simply instance variables to keep track of the
request. This leads to the commit failing with EBUSY sooner or later.
Make the atomic request and related variables thread local.
This prevents failing drmModeAtomicCommit() with 2 or more screens and
the threaded render loop. It does not fix other potential issues when
waiting for page flips to complete, that is to be tackled separately.
Task-number: QTBUG-74953
Change-Id: I2dac10d5e9bdc0cb556ac78c9643c96d40d692e4
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Otherwise we end up with using the same plane for multiple crtcs, which
fails (with atomic - planes have no importance when atomic is not enabled).
This fixes systems where we run with atomic enabled and there are multiple
primary planes with their possible_crtcs matching multiple crtcs.
Task-number: QTBUG-74953
Change-Id: I8bcbdd389265d09f8851187881102fb5b9a83b5c
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
With atomic enabled (QT_QPA_EGLFS_KMS_ATOMIC=1) the plane chosen for
a crtc becomes important. The current logic is pretty broken when there
are multiple planes available with many of them marked as being supported
by multiple CRTCs. Choosing the same plane for multiple crtcs results in
failing the atomic commit. This happens with a RPi4 with two screens
connected, for example. (because there are 2*3 planes: one primary, one
overlay, one cursor for each screen, but Qt is trying to use the same
primary plane with both CRTCs)
The issue does not surface in special environments where there is one
(dedicated) plane per crtc exposed by drm, but becomes apparent on a PC
or on the RPi where the setup described above is the common case.
As a temporary solution allow doing the following:
export QT_QPA_EGLFS_KMS_PLANES_FOR_CRTCS="49,28:78,57"
This would then force using plane id 28 for crtc id 49, and plane id 57
for crtc id 78. (the ids can be discovered either from the eglfs debug
logs, or by checking /sys/kernel/debug/dri/<N>/state)
This is to be complemented with a fix for picking a unique primary plane
for all CRTCs but that's going to be a separate patch. Allowing a manual
override is important regardless since it helps troubleshooting.
Task-number: QTBUG-74953
Change-Id: Ie03f80dac31813f2c4489235d435769dd3d3883e
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Having a platform with Texas Instruments's ADS7846 touch screen controller (NXP
i.MX6 DualLite SoC) and a LOGIC Technologies Inc. LTTD800x480 L2RT 7" (800x480
pixels) TFT LCD panel attached to it (resistive touch) using Linux v5.2.17 and
libinput-1.12.6 a single one finger touch starts with a LIBINPUT_EVENT_TOUCH_
DOWN directly followed by a LIBINPUT_EVENT_TOUCH_MOTION both having the same
touch position.
Now Qt's code for touch input processing compressed both into one touch point
with state Qt::TouchPointStationary which resulted in QGuiApplicationPrivate::
processTouchEvent() seeing no touch points with state Qt::TouchPointPressed
anymore. As a consequence processTouchEvent()'s local container windowsNeeding-
Events stayed empty and the whole touch frame was skipped.
Fix this by still compressing into one touch point, but keeping its state as
Qt::TouchPointPressed.
Fixes: QTBUG-79212
Change-Id: Ia571d79ec5c1d6143e923ed69b378503b53e5992
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Had to teach the update program to accept category Lm as for
Joining_Transparent, for the sake of a new ArabicShaping.txt entry.
Added three new Unicode versions, several new scripts and a new
word-break class.
Updated UCD's test data for tst_QTextBoundaryFinder. This left 57
tests failing; I have commented out the data rows for those tests,
pending someone with more knowledge addressing this.
Task-number: QTBUG-79631
Task-number: QTBUG-79418
Change-Id: Ic33d3b3551195d47a84d98e84020f57a68f0b201
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Move the feature to corelib so that the QMetaType enumeration
values can be properly excluded and there is no need for a
dummy class.
Use QT_REQUIRE_CONFIG in the headers of classes to be disabled.
Add headers/source files in the .pro file depending on the configure
feature in libraries and tests.
Add the necessary exclusions and use QT_CONFIG.
Task-number: QTBUG-76493
Change-Id: I02499ebee1a3d6d9a1e5afd02517beed5f4536b7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
After commit 5f160a3699 moved the code
that's shared across all bearer management plugins into QtNetwork, there
is one piece of code remaining that's shared across the connman and the
networkmanager bearer plugin: The dbus ofono interface code. To avoid
linking that twice (and causing duplicate symbol errors), this patch
moves it into a static platform support library. This way for shared
builds the code is included twice, but for static builds only once.
Change-Id: Idf5414bc22fea45f11c600f28eaea91bb4dc6308
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QGlyphSet would not copy correctly, but also didn't have
a Q_DISABLE_COPY defined. This can easily lead to undefined
behavior, and was visible when trying to do the QList
to QVector conversion.
As we only have a 10 item large LRU list here, implement it manually.
Change-Id: I903085ddeac59224715dca6e8a1ff26c44f5b0b0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
.Noto Sans Univeral is a system-generated font, but for some
undiscovered reason, it has different content when the app
has a valid Info.plist versus when it does not.
When there is no valid Info.plist, the font will act as a
last-resort font and return a question mark glyph (index 4)
for all characters it does not support. This was discovered
with emojis, but I also verified that the font returns index
4 for a random character in the Cherokee range, in order to
check if this was specific for emojis or not.
This causes the font to take precedence over anything that
follows it in the fallback list in apps that do not have
a valid Info.plist, so it has to be at the end of the list.
Note that in these apps, it will act as a last-resort font,
so the glyphs returned for missing characters will be
different from in a regular app bundle. But this seems
safer than to exclude the font entirely, given that
Noto Sans cover a large range of characters and might be
needed.
This font also refactors the look up of fonts to push to
the end to avoid doing lots of unnecessary looping over
the list.
Fixes: QTBUG-78833
Change-Id: I38bec5d5941681c4b4586072f7811d31561e1051
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In d5abda313d, we started populating
meta-fallback-fonts in the font database because some that are
returned as fallbacks are not in the main list of fonts on the
system, so we would exclude them, thinking they were non-existent.
But populating these fonts by name does not always work, as
the system explicitly forbids requesting meta-fonts by name
for some cases. One of these was the emoji font, which would
resolve to a incompatible font descriptor and support for
emojis would be broken.
The fix is to retain the font descriptors we get from the
system instead, since these are guaranteed to be refer to the
correct font. This also saves us an unnecessary round-trip.
Task-number: QTBUG-78821
Task-number: QTBUG-77467
Change-Id: Icb17ccc75811eebf03919437828ba71f3ef08938
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add a RAII class for registry keys and use it throughout
the code base.
Change-Id: I666b2fbb790f83436443101d6bc1e3c0525e78df
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
From macOS 10.15 and iOS 13 forward it's not possible to create font
descriptors for system fonts such as .AppleSystemUIFont based on the
family name.
This means we have to preserve the font descriptors we get from CoreText
for fallback fonts, so that we can populate them along with the family name.
Task-number: QTBUG-78821
Task-number: QTBUG-77467
Change-Id: Ifce01da65f90afb7dc2bc3005c3c5870b9c116de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The Y coordinate needed to be reversed to produce expected results.
Fixes: QTBUG-69803
Change-Id: If349912cd078d17ce69d207c2ed35cf781c1a14d
Reviewed-by: Michael Brüning <michael.bruning@qt.io>
When this was refactored in 3bc10fb9bb to use unique pointers, a move was
added before the connection, so it would essentially always try to connect a
nullptr.
Change-Id: Iab7fce88bc73afd78e6b63ffaef7358f3f4ce7e3
Reviewed-by: Rainer Keller <Rainer.Keller@qt.io>
The xcb platform plugin uses this category for detailed input event
logging, so we might as well be consistent in evdevtouch. When hardware
supports pressure sensing, it's likely to need extra debugging.
Task-number: QTBUG-77142
Change-Id: I7682bb5d49e669054523f9cf556715e511bcd572
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
If the user specifies a font family in their application that doesn't
exist in the system, or one that uses the localized family name, we
will end up resolving the family alias for all fonts in the system,
which typically adds 600-800ms of startup time. Let the user know
when this happens.
Change-Id: Id8d6f55028e37f681ec4a686df25d33240b5a30f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
By default we disable screen blank and hide the cursor. This is something
inherited from Qt 4. Then reset to some default values when exiting.
This is not ideal when the system is configured with kernel parameters
like consoleblank=0 or vt.global_cursor_default=0.
So have a way to skip all tty voodoo. On systems where relevant,
one can now launch with QT_QPA_PRESERVE_CONSOLE_STATE=1 set.
[ChangeLog][Platform Specific Changes][Linux] Added an environment
variable QT_QPA_PRESERVE_CONSOLE_STATE that can be used to prevent
Qt from altering the tty screen and cursor settings when running
with platforms like linuxfb and eglfs.
Task-number: QTBUG-61916
Change-Id: I0e84e53f2d5fca992a7d26d0280ba35e30523379
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This introduces a dependency on ts_get_eventpath(), which is only
available in tslib 1.15 and newer. This raises the required version to
an unneeded level, so just drop the debug message if the API is not
available.
Change-Id: I4a1cd7abec8d139e70555506d9d21edacf0f4d71
Fixes: QTBUG-78867
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Since iOS 13, the cascade list for the default UI font contains
meta-families for several writing systems, such as CJK. Since
these font families were never populated to the database, we ignored
them in Qt, and thus got missing glyphs for the characters in question.
The fix is to make sure these fonts are populated in the database.
It contains a partial backport of 922d195020,
which adds the qt_isFamilyPopulated() accessor to allow us to check
if the family has been populated in the font database. In Qt 5.14,
there is public API for this in QPlatformFontDatabase, so this is
a temporary resolution until then.
Fixes: QTBUG-77467
Change-Id: Ia9ebb8a19ad2367eb764ae1496a52966b465336b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add back code to handle bitmap glyphs returned when we did not request
a bitmap glyph. This is a can happen on some configurations where
bitmaps are not suppressed.
Fixes: QTBUG-78116
Change-Id: Ie0c6cfbf9c50456431b0e3a23e568f3399e5a879
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The DefaultFontFallbacks.plist system file that we used for looking up
style fallbacks does not exists in macOS 10.15, nor did it ever exists
on iOS. Instead of relying on this file, we hard-code a set of default
families, that we then look up the fallbacks for.
The result of QFont::defaultFamily() on macOS is now:
QFont::Helvetica --> "Helvetica"
QFont::Times --> "Times New Roman"
QFont::Courier --> "American Typewriter"
QFont::OldEnglish --> ""
QFont::System --> "Lucida Grande"
QFont::AnyStyle --> "Lucida Grande"
QFont::Cursive --> "Apple Chancery"
QFont::Monospace --> "Menlo"
QFont::Fantasy --> "Zapfino"
And on iOS:
QFont::Helvetica --> "Helvetica"
QFont::Times --> "Times New Roman"
QFont::Courier --> "American Typewriter"
QFont::OldEnglish --> ""
QFont::System --> "Helvetica"
QFont::AnyStyle --> "Helvetica"
QFont::Cursive --> ""
QFont::Monospace --> "Menlo"
QFont::Fantasy --> "Zapfino"
Fixes: QTBUG-78240
Change-Id: Ie9bc13c9c1031d89f024199e4736a046c568a48d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some modules define their own manually-maintained lists, and we can rely
on the headers generated by each module to include in the pch as well
e.g. QtCore/QtCore.
There's also e.g. QtWidgetDepends for QtWidgets, but this only
works for modules, not for tools, examples or other applications.
For now we'll use the Qt<Module>/Qt<Module> headers for the
modules we depend on.
Building with PCH can be disabled with -DBUILD_WITH_PCH=NO, and it only
works for versions of CMake newer than 3.15.20190829.
Change-Id: Iae52bd69acfdfd58f4cd20d3cfa3c7f42775f732
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As a rule, we don't deliver touch events containing only stationary
touchpoints. To fix QTBUG-52510 we added an exception in
1bd0ab7050 : if the velocity changed,
deliver it anyway. Now we need to do the same if the pressure changed.
Also, on the customer's hardware, pressure is indicated via ABS_MT_PRESSURE.
Change-Id: If7f7088df055d686cdd86967b999e38024f8170f
Fixes: QTBUG-77142
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Add support for specifying the blend operation used when alpha-
blending KMS planes. Only available with atomic modesetting.
Set the environment variable QT_QPA_EGLFS_KMS_BLEND_OP to
the enum value of the 'blend_op' property.
Task-number: QTBUG-75659
Change-Id: If0ef5ba314b88adb530113b608d20fc9c027c5ec
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Follow up to 091a386eaf
Defaulting to querying from the egl config is fine, but dropping support
for the "format" key in the output list in the json config file is not
ideal.
Task-number: QTBUG-76748
Change-Id: I25dc99369d118c300cdef25b464426f6be85453b
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
With things like sample count reducing a format (16 -> 8 -> 4 -> ...)
and trying again is perfectly fine. There is no need to show warnings
in this case. Even some of our own examples in qtdeclarative do a
setSamples(16) which is rarely supported. These all show warnings since
8ec98fc2dc. Avoid this.
Change-Id: Ice83d5720b02e92f77cfd63918c98ad222513b6a
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
No point in warning on every application startup that framebuffer size
setting is not available. Just ignore it then.
Change-Id: Id36ff0ab9560b99cc3f2d56a4ee51455cfa43cb7
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Simply return a Glyph pointer and not a QImage to avoid allocating and
deleting lots of d pointers for QImage when drawing text. Saves one
new/delete pair per glyph drawn and speeds up text drawing by 10% for
relatively large glyphs (probably more for smaller ones).
The qtext::paintLayoutToPixmap() benchmark shows a 16% improvement
in performance with this change.
Renamed the method to glyphData().
Change-Id: I7a353de521e4f4321c770fb1ac6043d33f6f332c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Except in the auto-generated files.
Required to add a cast operator from QDBusObjectPath to QVariant, as the
variadic call() uses QVariant(arg) instead of QVariant::fromValue(arg).
[ChangeLog][QtDBus][QDBusObjectPath] Added explicit cast operator to QVariant.
Change-Id: I3f3004f7b9300a6340d27488f5b97981cbab3c24
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit eea99e1e8f.
The call to FcFreeTypeQuery() takes over 300 ms for
NotoSansCJK-Regular.ttc and friends, so in the current state,
this change cannot be used. I am not sure why these file
in particular takes so long, but it might be because it is
large (around 19MB) or because it is a font collection.
The original fix was intended to be a smaller performance
optimization, but it has added over 2 seconds startup time to
simple applications showing Chinese text, so we revert it
for now and it can be resubmitted later when the problems
have been ironed out.
Task-number: QTBUG-77108
Change-Id: Ibb2ef799573d7effd1595d788939fe33d82cc923
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This is basically a backport from weston:
75487c2560
It states that:
- preserving the existing CRTC -> encoder -> connector routing will
make the startup faster
- the existing routing may be set according to some device limitations
Since the QtWayland implementation appears to be based off an old
version of weston (maybe pre-2.0), this patch might look different from
the latest weston implementation. But the idea stays the same.
FWIW, this works around the issue I've seen on Renesas R-Car E3 (aka
Ebisu) board. Without this patch, VGA1+HDMI1 setup would fail because
the device reported possible_crtcs=1 (meaning {crtcs[0]}) for the second
screen "HDMI1", but the crtcs[0] was already taken by the first screen
"VGA1".
No usable crtc/encoder pair for connector "HDMI1"
With this patch, the crtcs[1] is paired with "VGA1" (as it is the
existing routing), so the crtcs[0] can be allocated for "HDMI1".
Change-Id: Ibd304a8b5efbe4a8aa94b2c5697fe2b399386280
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This reverts commit df2b76046d.
The patches causes high cpu load and it looks like vsync is done
by newer NVIDIA drivers out of the box without such a implementation.
Change-Id: I41c9cfcf1bbdf7da9b764394e4442768084e9a35
Fixes: QTBUG-74866
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Conflicts:
configure.pri
Also required s/solid\.color/solidColor/ in a couple of places in:
src/gui/painting/qpaintengine_raster.cpp
Change-Id: I29937f63e9779deb6dac7ae77e2948d06ebc0319
QChar currently is convertible from nearly every integral type. This
is bad code hygiene and should be fixed come Qt 6.
The present patch is the result of compile fixes from marking these
constructors explicit. As is clear from the distribution of fixes,
only low-level string handling code used these implicit conversions,
an indication that they're not in widespread use elsewhere.
Change-Id: Ief5336f21e6d181e03ab92893b3d13a14adc7cb0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If the filename matches, no other matching is necessary. Fontconfig
doesn't have a fast path for that, so implement one here.
Fontconfig is unlikely to add that fast path, see here:
https://gitlab.freedesktop.org/fontconfig/fontconfig/issues/103
With -O1 builds of Qt and KDE stack, 358 fonts installed according
to KDE systemsetting, on a Ryzen 1800X, startup time of kwrite
decreases as following according to perf stat:
msec task-clock: ~480 ms to ~455 ms
cycles: ~1.73e9 to ~1.65e9
Change-Id: I630a80e4bed2647d5bbd95247005aab7d0cb0363
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Implicit capture of 'this' in [=] is deprecated in C++20.
Fix by using explicit captures.
Change-Id: I1633446f4670202b0d1aca938d8c27dbc0c1411e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In all of these cases, the effect of the change is local to one file.
Change-Id: I3bda3aadee3b42e7797183c2330183390b92d1f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Color fonts may also contain regular alphabet characters that
should be rendered with the current pen. In Qt, however, these
characters were drawn into the cache with a default pen color
of black.
Since all characters in a font is currently backed by the same cache,
and it would require a lot of plumbing to get around this, a step
in the right direction is to include the current pen color in the
cache as long as it is an RGB cache. This means that drawing
text with the color font with different pen colors will create
different caches.
There is no API to select font color on Freetype currently, but
this problem has also not been observed there, as the fonts
in question, with both regular and color glyphs, are not being
detected as color fonts (so the text color will be correct).
So Freetype will be left out for now.
[ChangeLog][QtGui][Text] Fixed bug where regular text rendered
with a color font would always display in black.
Task-number: QTBUG-55096
Task-number: QTBUG-74761
Change-Id: Icc7dbf73241db1e7cc6a0de18c2de927aeecf713
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Define the static QAtomic at file scope to avoid GCC's pessimisation with
function-static QAtomic (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79561),
and make sure the initial value is 0, so it ends up in BSS, not TEXT.
In QRhi..., don't create a static instance of the wrapper class, use a file-
static atomic, too. This turns the class into a glorified namespace.
Change-Id: I707f628e2b434330028077223071716d5704ba32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Converts from OpenGL formats to Vulkan formats.
There are commented out lines for the formats in QOpenGLTexture::TextureFormat
for which it was hard to find an unambiguous mapping to vkFormat.
Task-number: QTBUG-75108
Change-Id: I06a7fd8df7d98cef314410ffd79ca9cff6599357
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
(cherry picked from commit b21b07877a)
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
On Linux this role is needed to make desktop notifications work.
There is no equivalent for Windows, iOS or macOS. On these platforms the
role will have no effect.
Fixes: QTBUG-76333
Change-Id: I4ef3b3321f7a0e2c09c1ce432a668428d14c52b7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Generate a pri file for public and private interfaces, but map CONFIG +=
internal_module to a cmake option and skip the former if set.
Task-number: QTBUG-75666
Change-Id: I3f4baf1277094f4c22149a9e8769734baf9a235f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We introduced WrapOpenGL to link against either desktop GL or GLESv2
depending on the GL feature in QtGui. This works "fine", with two
caveats:
(1) find_package(WrapOpenGL) must be called after
find_package(Qt5Gui) in order for the feature check in
FindWrapOpenGL.cmake to work. That's error prone.
(2) More and more places are popping up, in particular examples,
where GL linkage is required due to inline functions in Qt that
forward to GL functions - such as on Android.
This in particular explains the qmake behavior of making the GL
linkage (desktop _or_ GLES) a public dependency of QtGui, so only
Gui linkage is required.
Those two aspects combined are the nail in the coffin of FindWrapOpenGL
and it would seem much easier to simply make the Desktop GL vs. GLES
decision once in Gui's CMakeLists.txt and let Qt5GuiDependencies.cmake
propagate this well. This allows us to get rid of plenty of special
cases as well.
Change-Id: I3a7e8af49537ce5f215f24470e075a4ae9aeb944
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
[ChangeLog][QtGui] Added support for filtering Vulkan debug messages in
QVulkanInstance. This is especially useful for processing or suppressing
messages from the validation layers.
Change-Id: Idf0d7889085948daf5b1a53d2a9b11081e967609
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
9204b8c31e broke font matching on Windows.
This was then attempted fixed by bcd2fa484a,
but this caused an infinite recursion for some cases, so it was reverted
again by 9d1905da9c.
The original issue was that if we populate a specific face of a family,
such as "Arial Black", then the typographic/preferred name will be
detected as "Arial" and this family will be set as populated=true, even
though we have not yet registered any additional subfamilies. In this case,
we need to call populateFamily() for the typographic family name to
ensure we get Windows to enumerate all the subfamilies in that family
before it sets it as populated=true.
But this broke for some fonts where the font naming was unconventional.
In particular, "Yu Gothic" would have its Japanese name as the
typographic name, and there would be no font in the system where
the old-style font family name matched the typographic name. In
that case we would go into a loop where we would try populating
"<Japanese font name>", Windows would translate this to "Yu Gothic", we would
translate it back to "<Japanese font name>", ad infinitum.
In order to avoid the infinite recursion, we add a recursion guard
as well, ensuring that we never call populateFamily() for the main
family we are currently populating.
[ChangeLog][Windows][Fonts] Fixed a bug where it would be impossible
to request different faces of a font family after a specific type face
has been in use.
Task-number: QTBUG-74748
Task-number: QTBUG-74983
Change-Id: Ibe6239f67c45d67ebf75947c8f231cfa177e347f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When there is no DBus session, there will be no Linux accessibility,
since it relies on the presence of DBus.
Fixes: QTBUG-50189
Fixes: QTBUG-51940
Change-Id: I7503011b39ba2a806ddc12e89d0f7bd72a628b64
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
FT_GlyphSlot_Oblique(), the Freetype function to synthesize a
slanted/italic font, only accepts glyphs with outline format. So
disable loading bitmap format glyphs when that function will be used.
Fixes: QTBUG-73586
Change-Id: I762a4bc34537e0725ead0fb063d50c997403143d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Atomic being supported and atomic being requested are two different things.
(the latter is only true when QT_QPA_EGLFS_KMS_ATOMIC is set)
Log accordingly since this can be very important to know when investigating
problems.
Change-Id: I6947d18e7c0eaef3fe160095cb046770f9c93efe
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
This allows closing, minimizing and maximizing the window.
Fixes: QTBUG-74999
Change-Id: I8b3ad806a1767586c8cf7e5a1848fc0e525621cd
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Alexandru Croitor
Eskil Abrahamsen Blomfeldt
Johan Klokkhammer Helsing
Qt Forward Merge Bot
Marc Mutz
Leander Beernaert
Olivier Goffart
Friedemann Kleint
Liang Qi
Pasi Petäjäjärvi
Laszlo Agocs
Paul Olav Tvete
Allan Sandfeld Jensen
Ulf Hermann
Mårten Nordheim
Jimi Huotari
Joerg Bornemann
Ulrich Ölmann
Peter Varga
Edward Welbourne
Simon Hausmann
Lars Knoll
Tor Arne Vestbø
Shawn Rutledge
Albert Astals Cid
Rolf Eike Beer
Yuya Nishihara
Dominik Holland
Andreas Hartmetz
Frederik Gladhorn
Giuseppe D'Angelo
Eirik Aavitsland