This test shows a behavior change of setFrameStyle(QFrame::WinPanel)
between 4.4 and 4.5.
Turns out that 4.4 defaulted to "Raised" only via a side effect of the
code, while 4.5 defaults to "Plain" which makes more sense since Plain
is the default anyway. So there is no actual bug to fix (the app code
really meant QFrame::WinPanel|QFrame::Raised anyway), but the unittest
is still good to have for the future.
Done-with: David Faure
Change-Id: Icf16382504b18357256bc601b1e865abac9f2b2a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The recent NDKs have included the 4.9 version of the gcc toolchain,
so we default to that instead of 4.8. This is also required for building
for 64-bit targets, since the other toolchains do not support that.
Change-Id: Id6908eb41c8e7cf003a9b134607ab2e55cb489e9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Follow the same convention as other functions using the QMetaTypeSwitcher
It was not a problem since none of the built-ins type in QtWidgets
or QtGui were pointer and could not have a QMetaObject. But since
we want to register the metaobject for Q_GADGET, it would fail compilation
as types like QFont are not defined in QtCore.
Change-Id: I6307bf6f25439ed48355ef7ecfa60575de318a25
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
When sending a second request with implied credentials the connection
used may be cached as a connection without credentials, and thereby
incorrectly reused later for other connections with different implied
credentials.
This patch updates the credentials a cached http-connection is using
before sending a request on it.
Task-number: QTBUG-39456
Change-Id: I1609234136a89c32e00432a67720cd62a73a488a
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
This makes the GLSL compiler issue correct line numbers on errors
even in the presence of the other preprocessor lines inserted by
QOpenGLShaderProgram/QGLShaderProgram.
Change-Id: Ief4fc1dd1e94bb2b3a1ad13fbaf62186910a4994
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Of the const overloads that return a QString or a QByteArray, this is
one that gains the most benefit. It happens often in constructs like:
QByteArray s = x.readLine().trimmed();
After this change, 41 out of 103 calls to trimmed become rvalue in Qt
and 272 out of 441 in Qt Creator. For simplified, the numbers are 27 out
of 69 in Qt and 10 out of 19 in Qt Creator.
Other candidates are left, right, and mid, but there are exactly zero
uses of left, right and mid on an xvalue QString or QByteArray in Qt.
I'm being lazy and using qstring_compat.cpp to store the QByteArray
compat methods.
Change-Id: I4e410fc1adc4c761bb07cc3d43b348a65befa9f6
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
With the side-effect that variables and functions in the argument are
now "used". This means we don't need to #ifndef functions only used in
assertions: the compiler will eliminate them by dead code elimination.
Due to the mandatory short-circuiting of the condition, no functions
will ever be called and this expands to no more code than before.
On the negative side, because we won't get warnings for unused variables
initialized outside the Q_ASSERT, non-inlineable calls will not be
elminated by dead code elimination, so they will remain in release code
without warnings.
Because of the expanded code now in Q_ASSERT, the Intel compiler's
optimizer gets thrown: it complains that the non-void function is
failing to return anything, so I had to add two return statements.
Change-Id: I1bb79c9637a2771ef1ec093f901b8d2443788bd6
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
For some reasons lost in history, those methods simply ignore
the list of items passed to them, and always return NULL.
Of course, that's totally broken. Fix that by doing the same thing
that the respective (hidden) models did when calling mimeData().
Surprisingly enough, QTreeWidget has a proper implementation.
Task-number: QTBUG-25900
Change-Id: I99ca7b4d4f87f096fd9ff0b0cb4e58282aa9c26e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
QMetaType::type(const char *) requires that the string argument is
0-terminated. This new overload makes it possible to query the type
of a string with an explicit length.
In particular, QByteArrays constructed by QByteArray::fromRawData(),
for example from a substring of a normalized method signature (the
"int" part of "mySlot(int"), can now be queried without making a copy
of the string.
Also, Qt5 meta-objects represent type names as QByteArray literals,
which can be fed directly to this new QMetaType::type() overload (no
need to call strlen).
Change-Id: I60d35aa6bdc0f77e0997f98b0e30e12fd3d5e100
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If we're called out of bounds, sourceModel()->index() will take care of
returning an invalid model index anyway. So calling rowCount+columnCount
every time index() is called can be avoided. These calls can be particularly
slow when sitting on top of a stack of proxymodels. And index() itself is called
very often, i.e. when a proxymodel on top of us is used by a delegate
which calls data() for many different roles.
Change-Id: I45ad6249ea6c6c719a28d25a03b6e5003f4e49ee
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
The change reduces heap allocations by using file mapping instead of
reading a whole file into memory just to create a slightly modified
copy of it.
For this small test case:
moc <<EOF
class X : public QObject { Q_OBJECT Q_PROPERTY(int x) };
EOF
massif shows improvement from:
peak cost: "26,8 KB" heap "2,1 KB" heap extra "0 B" stacks
to:
peak cost: "11,3 KB" heap "2,2 KB" heap extra "0 B" stacks
In general, depending on source file high peak memory usage is reduced
from few to few hundreds KB, especially that the allocation used to
happen for each include file too.
Change-Id: I9c1c848be848444156af25a991b67161fb9d8b29
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Methods can be invoked with QMetaMethod::invokeOnGadget
Change-Id: Id734868bb530b02587daf0f62bce01798ade2ac2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Adds automatic conversion from QVariants with a QVariantHash to
QJsonValue and explicit methods for conversion between QVariantHash
and QJsonObject.
[ChangeLog][QtCore][QJsonObject] Added conversion to and from QVariantHash
Change-Id: I140ef881463acabaab2648e28209487d8ad18e0d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Instead of sending the event from random places, send it from
QWindowSystemInterface. This allows to send override events on OS X to
menus before doing other key processing and reduces the number of
ShortcutOverride events on all platforms to exactly one per key press
event.
Additional test by Friedemann Kleint.
Task-number: QTBUG-38986
Change-Id: I6981bb776aba586ebc7c3daa5fd7a0d84c25bc3e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
That way we will be able to access property of objects that are not QObject
(Q_GADGET)
Change-Id: Ib8ef6e52fc621e0b0d6530f82b1aa205f1ed5fd9
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This provides a way to invoke Q_INVOKABLE method
Change-Id: I301cec2a21c2889fb9dde0b1eb6e92d0bd561bd7
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Adds special shaders for the Alpha8 and Grayscale8 formats so that
they do not need to rely on the support of GL_ALPHA and GL_LUMINANCE
that has been removed from core in recent OpenGL versions.
Change-Id: Ie370379b458abf2a50e252bc5099aefc1b11fb1d
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Introduce a static function returning the value called from
qMakeFieldInfo(SQLHANDLE). The field is currently only populated
when executing a query. Populating it from QODBCDriver::record()
would require executing a dummy query, which is problematic since
QSqlField does not have any provisions for delayed evaluation.
Document the limitation.
Task-number: QTBUG-39388
Change-Id: Ib2d2f2653b8b757389f627142c61c13a117fef72
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Refactor code to extract an overload of qMakeFieldInfo()
that only takes an SQLHANDLE hStmt parameter. This allows
for easy debugging and inspecting driver-dependent additional
columns in QODBCDriver::record().
Task-number: QTBUG-39388
Change-Id: Id338838f837746beff1b2711bf2cd66ca8c7afe6
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
1. If the interface used by a configuration changes, remove the whole
configuration and replace it with a new one (instead of updating it).
While this isn't intuitive, this is the exact behavior we used to have
on android when using the generic plugin...
2. Setting the session state to roaming is not correct in this context
as it's a transitional state where we should end up in connected state
(forced roaming). Before this patch we would get stuck in the roaming
state for mobile networks.
4. Use QNetworkInterface::name() instead of
QNetworkInterface::humanReadableName(), as this is the expected
value when querying the interface used.
3. Don't re-iterate through the interface list for each configuration.
Task-number: QTBUG-41832
Change-Id: I315f725434bc6a1a8dca13dffd41f606c87bd06d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
This fixes QNetworkConfigurations when user:
- configures new AP
- deletes connection configuration
- switches wifi AP
Change-Id: I38c543c6de7b61f49d7ac96fa05f7a6fc4fba70f
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
The search state is used by VoiceOver on iOS to announce a search field.
Change-Id: I464125827dbbf275daf38104e26e9591bb23365a
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
This extends the test suite introduced in 497f0af1f7 for
a known-to-be-good case.
Change-Id: Ib574ecfdb8e9d91985d6df8c092896581d1d06ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The previously produced code was valid C++. Add the declaration
nevertheless to help people who want to use the switch in their
own code.
Task-number: QTBUG-42119
Change-Id: Ia47cf3930684474ff65e5cf37335d7d7f57a1d31
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QLineEdit commits and hides QInputMethod on enter key press. When
Qt::ImhMultiLine input method hint is set, virtual keyboard is not
hidden.
Task-number: QTBUG-37850
Change-Id: I018351caa18bd2116665771e5f024a57182a01b9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
[NSString lengthOfBytesUsingEncoding] only returns the number of bytes
required for the actual string, not including the zero terminator, so
when we then used cStringUsingEncoding to fill the malloced buffer with
data, we overwrote the byte after our buffer with 0, resulting in random
and hard to reproduce crashes at application startup, seemingly depending
on the application name.
Change-Id: I35d261bea5924e917475b0270bfa280bfb0c787a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We should have more font weights in QFont::Weight to allow for
finer grained control.
For the time being, we can simply use intermediate weights to better
support the different font weights falling in between the ones
defined in QFont::Weight.
Also amend the documentation to clarify the fact that QFont supports
and can return weights falling outside the predefined values, which
is already the case (e.g. when using fontconfig).
Done-with: Gabriel de Dietrich
Change-Id: I693cdd48b8b77e7ed550cdf991227bcb819d8e7b
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add missing semicolon, include QtWidgets instead of QtGui and
use cast for a const pointer because the example with casting
relates to the code above where 'widget' is const.
Task-number: QTBUG-31736
Change-Id: I5cb6d33ec692deaf41e9a1be9e36e752a8da8739
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Replace "Apple Roman" by "Macintosh" which is registered by IANA:
http://tools.ietf.org/html/rfc1345.
Replace unsupported "GB18030-0" by "GB18030".
Remove "JIS X 0201" and "JIS X 0208" as they are supported as parts of
other Japanese encodings but not directly.
Add "HP-ROMAN8" which is supported by both Qt and ICU.
Also clean the codecs test.
Change-Id: Iaf8e8ff1900d3f92ea0e0df75c60fe1534de23ac
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Substitute this encoding by "macintosh" when Qt is built with ICU.
It is for compatibility with Qt 4.x.
Change-Id: I70c51cba7d473ac81e25862736cb71a2f6894055
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Expands to constexpr if C++14 relaxed constepxr are supported by the compiler
[ChangeLog][QtCore] Added Q_DECL_RELAXED_CONSTEXPR for the corresponding C++14 feature
Change-Id: Id6b56b3a17da2ff838c80795e528e1247dc13f63
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removing and adding toplevel items could result in invalid stacking
order (not corresponding to insertion order).
Task-number: QTBUG-19316
Change-Id: Ia8646784a2181cfa936b101e2adaf7e7e73bb83d
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Selection rectangle was incorrectly mapped to scene space when the
view was rotated. It became a rotated rectangle instead of the correct
polygon (rhombus).
Task-number: QTBUG-42008
Change-Id: Ib7b366bec7e1f83109e03c434268ad6897138f30
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Add support to get/set the DuplexMode on Windows and Mac, improve the
CUPS duplex handling, ensure support is the same on all platforms.
[ChangeLog][QtPrintSupport][QPrinter] Added duplex support for Windows
and OS X.
Task-number: QTBUG-11332
Change-Id: I9d61d63233d828c3b1fd6df54072c6049f3c6298
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Set QT_QTESTLIB_RUNNING=1 on QTestLib startup.
This allows Qt to adapt its behavior to the testing
environment, WHICH IS NORMALLY NOT SOMETHING YOU WANT
TO DO. Use with caution.
Change-Id: I31de80e7c2cc91ff1ed8137926e6b729ef6efdc6
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The sample lineedit in Qt's own font dialog shouldn't have its font
affected by stylesheets.
Not only does this hampers the ability to preview the font, it actually
overrides the font selection as that one is taken directly from the
widget.
Task-number: QTBUG-41513
Change-Id: I11d0bef8c7bf7bdae4cc08b6b9276d0fc14a75fb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Also remove the ending space if the object is null
Change-Id: Ieb2bb903de35b4e339c812cd07555b5d108d118b
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Snow Leopard support is dropped in 5.4.0.
Change-Id: I7f13735fe5dc8ed3051d918feb7b5600a72c3493
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
After the poodle vulnerability SSLv3 should like SSLv2 no longer be
considered safe, so when a user request a safe protocol we should
only allow TLS versions.
[ChangeLog][QtNetwork][QSsl] QSsl::SecureProtocols now also excludes SSLv3
Change-Id: If825f6beb599294b028d706903b39db6b20be519
Reviewed-by: Richard J. Moore <rich@kde.org>
David Faure
Eskil Abrahamsen Blomfeldt
Olivier Goffart
Allan Sandfeld Jensen
Florian Behrens
Thiago Macieira
Gunnar Sletta
Morten Johan Sørvig
Giuseppe D'Angelo
Kent Hansen
David Faure
Jędrzej Nowacki
Frederik Gladhorn
Antti Kaijanmäki
Frederik Gladhorn
Friedemann Kleint
Christian Strømme
Lorn Potter
hjk
Samuel Nevala
Tor Arne Vestbø
Pierre Rossi
Alexander Volkov
aavit
John Layt
Jędrzej Nowacki
Gabriel de Dietrich
Leena Miettinen