The section is already called Transformations. Making
it a target just causes issues in other contexts.
Pick-to: 6.4
Change-Id: I8dc65bd3254238e51a649f926cd066dfcbe9500d
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
This was last used in 2011, before Qt 5.0 release, when QPA was yet
another windowing system, not the only option.
Change-Id: Ia4a094014ddb48cc9f6dfffd16f83aad1b7109e7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
They weren't flags. They were the version of Qt that was used in
compiling the application itself. The protection against rollback isn't
necessary any more, since qversiontagging.h, which applies to everything
and not just the main application binary. And using them to make
decisions on functionality or behavior is misguided (see previous
commit).
This commit does not deprecate the front-end classes' argument. In the
future, we may find some need for them.
Pick-to: 6.4
Change-Id: Ia4a094014ddb48cc9f6dfffd16f83a7b58ff95d3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The code incorrectly tried to ensure that the firstVisible tab was a
valid index, even though there might not be any visible tab left after
removing the last visible tab.
The same logic didn't exist of the lastVisible tab, so we tripped the
assert in qBound, as max (being -1) ended up smaller than min (0).
Fix this by removing the wrong correcting of firstVisible to be always
valid. Make sure we emit currentChanged with -1 when no visible tab is
left after removing the current tab.
Add a test.
Fixes: QTBUG-104003
Pick-to: 6.3 6.2
Change-Id: I27e6438a02d0a0f1ac4d0e0160cee4f33b3f3766
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When the submenu is about to exceed the screen,
set the position of the submenu to the left border of the main menu
Fixes: QTBUG-104050
Change-Id: I8935f1bfceb93cfa1097391689f4233991394978
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
An aliased line painted directly on top of the top edge of the clip
rect will work fine when there is no scaling, since the coordinates
will snap downwards. When a fractional scaling is applied however, the
main part of the line width will sometimes fall outside the clip rect,
and so the coordinates will snap it outside, and hence it will not be
painted.
Fix by shifting the y coordinate by .5, to place the center coordinate
of the line to the center of the intended pixel.
Fixes: QTBUG-88934
Task-number: QTBUG-96223
Pick-to: 6.3 6.2
Change-Id: I3ab042bc964eac6ce359d40428c4d79cde9cb78c
Reviewed-by: Nodir Temirkhodjaev <nodir.temir@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Use the widget screen dpr in calculations rather than
qApp->devicePixelRatio(). The screen may have been
directly set (without the window handle being initialized)
Task-number: QTBUG-103309
Task-number: QTBUG-49663
Task-number: QTBUG-101947
Task-number: QTBUG-102982
Change-Id: I2af2073640b171baf68575e3bc93b29b6a9a471d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The documentation says we can change window parent to avoid the widget
deleting the window. That didn't work as the widget didn't get the
child-removed event as it wasn't the parent.
This patch instead uses an event filter on the set parent.
Pick-to: 6.3 6.2
Change-Id: I1f61d1832fcf3257722f305beeefd8f1abf1f656
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QWidget::metric is used to calculate the size of the menu, but it
only respects a sceen from a Window handle, so we need to make
sure such a thing is created.
Task-number: QTBUG-103309
Pick-to: 6.2 6.3
Change-Id: Ie73e362cdcb3b59f46ad51c4901fdbeda7258baa
Reviewed-by: Morten Kristensen <me@mortens.dev>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When replacing a widget in a hidden splitter, then we only need to keep
the new widget hidden if the previous widget was hidden.
If the new widget is not explicitly hidden, and the splitter is already
visible, then we need to explicitly show the new widget.
Augment test case; the existing test cases already cover swapping out a
collapsed or hidden widget.
Fixes: QTBUG-102134
Pick-to: 6.3 6.2
Change-Id: I9b60711a5c1cab79777ce4183783114a16ac3394
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This reverts commit 1e938c348b
and bb2f4d08d9.
bb2f4d08d9 causes the crash, but 1e938c348b amends it, so
this reverts both. When the cause of the crash has been determined
and mitigated, the patches can be recreated.
Fixes: QTBUG-103719
Change-Id: Ifc36b3771a96f6c85387a5306a0402d4c508d006
Reviewed-by: David Faure <david.faure@kdab.com>
Calculate the native metrics scale factor using DPI from the screen
instead of using devicePixelRatio from the widget.
This way the native metrics scale factor becomes independent
of whatever modifications QtGui applies to the DPR. This matches
its use case of scaling native metrics returned by win32 API.
Task-number: QTBUG-86344
Change-Id: I0d3c73956520e2bc4a56b23ea3cb8e1f0c36fcf1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Factor the construction of Private::keySequence from Private::key into
a helper function, as we'll need this functionality in more places
when we add a maxKeyCount property to the class.
Change-Id: I6b08a619c3b6b2a9ff660e9f51b02632c2359a47
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Draw tool button menu indicator relative to frame, not content, so that
padding added in the stylesheet creates room between text and indicator.
Also, prevent another double-arrow by ignoring menu indicator rendering
when a menu button subcontrol is used, as the two are mutually
exclusive. This amends 1c338e6d07.
Add problematic case to stylesheet baseline test.
Fixes: QTBUG-102866
Pick-to: 6.3 6.2
Change-Id: I5d79e65b33a2e41ac07c8efe0c15697c5be65201
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Revert the change to uic of 05fc3aef53.
Task-number: QTBUG-67283
Change-Id: Icfd83bb6d80b91d4e58f1be460f6772ba49a6921
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Several classes in QWidget use QDataStream internally in order
to save and restore state. These QDataStream usages were not
versioned, meaning that if Qt changes the serialization for some
datatype, then the data saved between different Qt versions becomes
incompatible. Note that the save/restore API in question just produce
opaque blobs as QByteArrays -- the user has no control over the
QDataStream objects and thus versions.
Fix by version the usages.
In QHeaderView this has caused a regression because QBitArray *did*
change version between Qt 5 and 6. In general, using QDataStream without
explicit versioning is a mistake, so deploy the same fix elsewhere as
well.
Fixes: QTBUG-99487
Pick-to: 5.15 6.2 6.3
Change-Id: I82bb5c266f4e5dedc0887cbef855dccab1015e29
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: <doctor.whom@gmail.com>
In a QGraphicsTextItem without a width yet, there's no need to do any
layouting. The use case is obviously items with an app-defined size,
not the default where text items adapt to their contents.
Results:
0.065 msecs to create a QGraphicsTextItem with some text (layouted)
0.036 msecs to set everything up in a QGraphicsTextItem with 0 width
QTextEdit was abusing the width 0 to mean "no wrap, width comes from
contents", but since the value -1 means that already in QTextDocument,
QTextEdit now uses a width of -1 for that meaning.
Change-Id: I67ad59c305e5dd34830886e4e6c56dde03c93668
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When drawing widgets with graphics effect using repaint manager,
if we do not combine the effect region some child widgets are not
affected by the graphics effect since they are not included in the dirty
region. However always using region bounds breaks the referenced bug use case.
Fixes: QTBUG-102374
Pick-to: 6.3 6.2 5.15
Change-Id: Iaf4eaba34db863500a0600b344e5062f2b36b9bf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Turn off native indicators if we have custom rules, and if we drew
natively, don't draw custom indicators. This amends
ea0e0a8652 which turned off custom drawing
too aggressively, removing custom indicators also if no custom drop
down arrow (which is only relevant for drop down menu buttons) was set.
When then drawing the custom indicator, respect positioning rules in the
style sheet.
Extend baseline test.
Fixes: QTBUG-102866
Pick-to: 6.3 6.2
Change-Id: I5ca353f42e704ec3f6e57677c35118a9cb358b0b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The item widgets all have an API flaw: getters and setters for the text
alignment deal with int instead of Qt::Alignment.
Deprecate the existing setters and introduce others taking
Qt::Alignment. Store the alignment directly into the item widget (now
that views know how to handle it).
We can't change the getters without cluttering the API, so make that a
Qt 7 change. Users can prepare by forcibly casting the return value to
Qt::Alignment; this is going to work in Qt 6 and 7.
While at it: streamline the handling of Qt::CheckStateRole as well,
avoiding to rely on a pointless Qt::CheckState to int conversion
through QVariant (the setter stores a Qt::CheckState, but the getter
retrieves an int and converts it to a Qt::CheckState).
Task-number: QTBUG-75172
Change-Id: I9f29e818e93cb2dc1d8e042bc320162c2f692112
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
All module header files should be listed in the corresponding sections
of modules SOURCEs to be accessible in CMake routines.
Task-number: QTBUG-103196
Change-Id: Ieb77ae70557e35e546a5b00387e1e0aa40338239
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This can be really helpful for deleting shortcuts that one may never
intend to use so that they do not accidentally get in the way while
interacting with the user interface.
The workaround is to try to find the QLineEdit child of the
QKeySequenceEdit widget, but it is suboptimal. Some first-class citizen
API for this would be a more stable and cleaner solution as opposed to
poking implementation details as a user of the QKeySequenceEdit API.
The clear action would be configurable and opt-in as not everyone may
potentially want this to be turned on. Or at least, not by default
anyway. Also, not to suddenly change existing QKeySequenceEdit uses with
surprising UI changes after a Qt upgrade, this needs to be opt-in.
Moreover, some customers may have already used findChild<QLineEdit *>()
to add actions to QKeySequenceEdit in this way on the client side. So,
if it was enabled by default, they would suddenly get multiple actions
potentially for the same clear action. This would be certainly
undesirable.
The new clear property is based on the corresponding QLineEdit API for
consistency.
[ChangeLog][QtWidgets][QKeySequenceEdit] Added a clear action to
QKeySequenceEdit to be able to remove existing hotkey configurations.
Change-Id: I3a90bfacd49bff10c1284abb155d7edd4f537900
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This speeds up creating a QGraphicsTextItem by 14% in an optimized build
Before: 0.070 msecs per iteration
After: 0.060 msecs per iteration
Those connects were showing up when profiling, because of the string
parsing that is necessary when using SIGNAL/SLOT macros.
The stacktrace was connect() => decodeMethodSignature() => argumentTypesFromString()
=> QArgumentType constructor => qMetaTypeInternal(const char*).
Pick-to: 6.3 6.2 5.15
Change-Id: I3cf5655c5450f121005140bdb587fafa083cce6a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* The rect passed to QToolTip::showText() is in view coordinates,
not in global coordinates.
* Determining this rect in the first place doesn't need calling view->visualRect(index)
The view already did this before calling this method, and stored it in
option.rect, so just use that.
* The widget passed to QToolTip::showText() should be the viewport,
that's what option.rect is relative to (thanks Giuseppe!).
Found these issues when implementing my own tooltip handing (for a subrect
of a delegate) by looking at this code.
Pick-to: 6.3 6.2 5.15
Change-Id: I852e5409def28da98137cd0c4c996083e5e45706
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Amends cf52d725156811754cd4e094b0984864795d1d58, after which most
indicator styling was no longer taken into account unless some other
item aspects were styled. Calling the baseStyle to draw the entire item
doesn't call back into the style sheet style for the indicator itself.
The QCommonStyle code that breaks the item up into individual sub
elements cannot be called for each element. E.g. turning off the check
indicator feature changes the layout of the item.
So if the indicator is styled, then we have to draw an otherwise empty
item with the style sheet style, and then clip the already painted rect
before calling the base style to draw text and highlighting with the
correct palette.
Add baseline test for QTreeView with different style sheets.
Fixes: QTBUG-102820
Pick-to: 6.3 6.2
Change-Id: I1da5676cc63556230eac525bc550457ebd495a58
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Expand the rubberband repaint area with one pixel to account for
rounding on screens with fractional device pixel ratio.
Fixes: QTBUG-102717
Pick-to: 6.3 6.2
Change-Id: Iede638d48dfbc3156b02ada28dfe99719b9d5efa
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
These debug statements come from the Nokia import and it seems unlikely
that they are being used at all.
Change-Id: I3143f83b0acdc5130fb743808003a55b789f2398
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes mocs_compilation.cpp empty again, removing those moc files
that were added after the last sweep in 2016,
0e6ad27549.
Including moc files directly into their classes' TU tends to improve
codegen and enables extended compiler warnings, e.g. about unused
private functions or fields.
Pick-to: 6.3 6.2 5.15
Task-number: QTBUG-102886
Change-Id: Iee35e82d18690469ad889f9b4a7394e706fe037d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The index in question has to belong to the view's model. An erroneous
emission shouldn't be silently ignored.
Change-Id: I7e037e72affb210f609a9a1029777acafae041f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If a user or a delegate asks a view to act on an editor that does
not belong to the view, report a warning instead of silently
ignoring the problem. This erroneous condition can happen for instance
if a user installs the same delegate on multiple views (something
that the documentation says _not_ to do) and the delegate indeed
emits signals related to the editors of one view -- the other views
don't know about that editor.
Change-Id: I2d10582ebb7aefca4acea306b8a57bcc3162050a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Required for porting away from QLatin1Char/QLatin1String in scope of
QTBUG-98434.
As a drive-by, fix qsizetype -> int narrowing conversion warnings for
the touched lines.
Change-Id: I133b80334b66e0a5ab9546dd8e1ff0631e79601e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Restoring the state of a window with a dock widget could cause a crash
in a multiple display configuration if the scale or screen arrangement
in the system had changed after the state was saved. In this case, the
original top-left coordinate of the window could now lie outside of any
screens, which would result in a NULL QScreen pointer being dereferenced
inside QDockAreaLayout::constrainedRect().
Fixes: QTBUG-102718
Fixes: QTBUG-102541
Pick-to: 6.2 6.3
Change-Id: Ie5e3209b82a33a1dc4568611c1b2ee3a6d8830b7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
screenGeometry() for proxy widget was returning visible part of the
scene instead of screen geometry for enclosing first view
Pass button center position to screenGeometry() to get correct screen
for cases when graphics view occupies two screens
Fixes: QTBUG-98785
Pick-to: 6.2 6.3
Change-Id: Idaeb3c3faf739751c93624a06fa0fd3d65388236
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QDockAreaLayout::sep represents the visual margin between a dock widget
and its frame, i.e. a dock within the main window.
The comment 'separator extent' has been replaced by a clearer version.
Change-Id: Icfb3d549a5bcb00c5f1cf4558c5a1c4f995e31f0
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Empty drop areas have a fixed size of 80 pixels in QDockAreaLayout.
If a main window is below 160 pixels wide or high, drop areas start to
overlap. If a main window's width or height is 80px or less, drop areas
fully overlap. Dock widgets can't be dropped in overlapping areas,
because the dock area becomes ambigous.
This patch decreases the width and height used to calculate the drop
area rectangle by the extent necessary to prevent docking.
QDockAreaLayout::sep (margin between a dock widget and its dock) is
used as the new minimum height and width.
Change-Id: I1db3282cfc7c602b59bb2f20ba616efe1719b0cb
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The work done by QGuiApplicationPrivate in response to a theme change
goes beyond notifying.
Change-Id: I27c74adf6549c553e659c7b8e271945ce753031c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Problem: if you create a hybrid Widgets and Quick Controls
application, you would need to use QApplication rather than
QGuiApplication. But in that case, the QQuickWindows would
never receive window activation events from QApplication.
And this causes problems for controls, since, for example,
the palettes in use there will never update upon activation
changes, and instead sometimes get stuck as e.g QPalette::Inactive
after application startup.
This patch will make sure that we send out activation events
also for QWindows that are not QWidgetWindows.
Pick-to: 6.3 6.2
Change-Id: I649f5c653081c0c5249f4faf28a7de2c92f17421
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Check DockWidgetArea permissions of QDockWidgetGroupWindows with single
dock widget. Obtain a dock widget's tab position from a dock widget
group window if it can't be established otherwise. Remove hardcoded
assumption that a dock widget is in the left dock. Both cases have lead
to inconsistent entries and dangling pointers in
QDockAreaLayoutInfo::item_list.
Remove warning: QMainWindowLayout::tabPosition called with out-of-bounds
value '0', which becomes obsolete by the fix.
Create a QDockWidgetGroup window prepered to become a floating tab,
whenever a dock widget is being hovered over. Store it in item_list so
it can be found and deleted when required.
No longer call e->ignore() after propagating close events to the first
dock widget and thus preventing others from receiving the event.
Add logging category qt.widgets.dockwidgets
Update dock widget autotest with tests to check the fixes mentioned:
plugging, unplugging, hiding, showing, closing and deleting.
Blackist closeAndDelete, floatingTabs test on macos, QEMU, arm, android
due to flaky isFloating() response after a dock widget has been closed
or plugged.
QSKIP dockPermissions and floatingTabs test on Windows due to mouse
simulation malfunction.
QSKIP hideAndShow test on Linux in case of xcb error (QTBUG-82059)
Fixes: QTBUG-99136
Pick-to: 6.3 6.2
Change-Id: Ibd353e0acc9831a0d67c9f682429ab46b94bdbb0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
GNOME sends empty InputMethod event when switching applications
with Alt-Tab. As long as this event is empty, we don't need to
scroll to cursor, because we're not adding any input text to it.
This also fixes "out of scope" bug QTCREATORBUG-26628
Fixes: QTBUG-100039
Task-number: QTCREATORBUG-26628
Pick-to: 6.2 6.3
Change-Id: I3ccfea50ae52f6f0cbf82c29f07944894050e7dd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There is no use case for QProxyStyle to forward events to its base
style. QApplication does not send events to it; a style using e.g.
timers or so will have them active on *itself*, not on the proxy.
Moreover, forwarding *all* events is broken: QTBUG-96213 has been
triggered by forwarding DeferredDelete events sent to the proxy (thus
accidentally deleting the base style). But one can concoct many other
similarly broken situations; for instance, setting a proxy onto a base
style will make the style a child of the proxy. That sends a
QChildEvent to the proxy (ChildAdded), and that event is then passed on
the base style, resulting in the base style receiving an event saying
"you have yourself as a child".
Change-Id: I3b92bb168ce3c54a32469c36b6d1da4380ed564f
Reviewed-by: Rafael Roquetto <rafael.roquetto@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Calling deleteLater on an object of type QProxyStyle (or inheriting from
QProxyStyle) results in this object never deleted, since it simply
passes the event to its base style, which in case of deleteLater is
not right. QProxyStyle inherits QCommonStyle which in turn inherits
QStyle (which is QObject's descendent). So for the style to be deleted
we pass DeferredDelete to its base class - QCommonStyle::event (which
means QObject::event, since neither QCommonStyle nor QStyle override
QObject::event()).
Pick-to: 6.3
Fixes: QTBUG-96213
Change-Id: I99b8f413624e2f18ddae3fb331997f767de219d0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It's one of our best tools to improve compile times.
In some places, we can't do the change, yet, because there's no .cpp
file for the header file.
Also mark Q_DECLARE_METATYPE macros that are in the wrong place. We
shouldn't have Q_D_M markup for public classes in .cpp or _p.h files.
Fixes: QTBUG-102206
Change-Id: Iec0a39e4745571b24d07dacc87593321967c10e3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Kai Köhne
Thiago Macieira
Friedemann Kleint
Volker Hilsheimer
Wang Fei
Eirik Aavitsland
Albert Astals Cid
Thorbjørn Lund Martsum
Allan Sandfeld Jensen
Eskil Abrahamsen Blomfeldt
Morten Sørvig
Marc Mutz
Giuseppe D'Angelo
David Faure
Antti Määttä
Lucie Gérard
Alexey Edelev
Laszlo Papp
David Skoland
Sona Kurazyan
André de la Rocha
Volodymyr Zibarov
Axel Spoerl
Tor Arne Vestbø
Richard Moe Gustavsen
Timur Pocheptsov