The check in qglobal.h for __EXCEPTIONS is enough. This check here was
causing moc to define QT_NO_EXCEPTIONS
Change-Id: Id69569111e7d4e619e22ffff144daa661df4181d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Since the system proxies are on by default now then we turn off
libproxy support by default so that there is no risk of a conflict
occurring.
For instance on Linux, it is possible that libproxy indirectly causes
KDE 4 libraries to be loaded which will cause a conflict with the Qt 5
libraries. Therefore we turn it off by default, since the system
proxy setting is the overall better one to have.
[ChangeLog][Important Behavior Changes][QtNetwork] libproxy is now
turned off by default. Configure with -libproxy in order to enable it
again.
Task-number: QTBUG-53649
Change-Id: I0c6c5b9091dc2b2b7662fd44f2a1b49c622e563f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
Reviewed-by: Richard J. Moore <rich@kde.org>
Let QQuickStyleSelector in Qt Quick Controls 2 re-use the same
selection helper implementation.
Change-Id: I34cbba0aa178e342bb4004313e7ff56811e6be19
Reviewed-by: Liang Qi <liang.qi@qt.io>
Blacklisting maskedUpdate() to get QtWayland in the CI
Task-number: QTBUG-51399
Change-Id: Iabe8db88c7e0b6138cbbf6acab0964d85fdd2c36
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
To get QtWayland in the CI, we need to blacklist formatAt on OpenSUSE
42.1
Task-number: QTBUG-52991
Change-Id: I8f411ccd6ab1e1d385e98cd8cae81a5570d68a8f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
To get QtWayland in, we need to blacklist constructing_QTcpSocket test
Task-number: QTBUG-53662
Change-Id: I056547e74c7a46cf3e97f08399328ab2e684caad
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
To get QtWayland in the CI, we need to blacklist this test
Task-number: QTBUG-53665
Change-Id: I55b64a5d7f9444aa5ea73823a60c4cb9c88c31b7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
We need to blacklist the test since we need to get QtWayland in CI
Task-number:QTBUG-53648
Change-Id: Id98c18aa8f39766b5dbb859b085f1912c42339fe
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The stream in question is from prior to Qt 5.0 release, before
commit 718a2251be changed QDateTime
serialization format to store Qt::TimeSpec instead of the private
flag. The last byte was 0xff meaning LocalUnknown, but 0xff is
not valid in Qt 5.0.
It was just garbage that Qt up to now just accepted. With the upcoming
short QDateTime optimization, the results are worse.
Change-Id: I25d85d86649448d5b2b3fffd1450f57df17e7794
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
E.g. for a string of length 16, with i == 0, this loop can still run.
Same for the case where length is 8.
Change-Id: Ie95832b50ddeba2e0dfb0e3308e4c7a5376bb969
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only the OpenSSL backend is supported right now.
[ChangeLog][QtNetwork][SSL/TLS support] It is now possible to
set custom Diffie-Hellman parameters for QSslSocket-based servers.
Change-Id: I50148873132cd0ec7e414250b107b6b4cbde02ea
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
By changing the system proxies option default to being on, we
set it to be the more natural default setting. This is down
to the fact that people tend to assume that this is already
the default option.
[ChangeLog][Important Behavior Changes][QtNetwork] Proxies from
system settings will now be used by default. Configure with
-no-system-proxies to disable.
Change-Id: Iec5bbde9dff1311ce44418f6aa024bda05388cf6
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Peter Hartmann <peter-qt@hartmann.tk>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Coverity, CIDs 159312-159335, the same pattern:
if (ptr)
ptr->refs.deref();
Q_ASSERT(ptr->reds.load());
Coverity does not like (and rightfully so) potentially invalid (null)
pointer inside Q_ASSERT. Move Q_ASSERT into if-controlled block-statement.
Somehow these CIDs were skipped in the previous similar pass/fix.
Change-Id: I56f92d964ec0b59a7fdff066fa7231ddd71fd0d3
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
just like $$member(), but operates on a string value rather than a list
variable. it is the swiss army knife of cutting, providing equivalents
of left(), right(), mid() and reverse() all in one.
[ChangeLog][qmake] Added $$str_member() function.
Change-Id: I7c7c6c971db402fff41b428d32a4451f45400728
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
this is strlen(), but the name is matched to $$size(), just namespaced
to reflect that it operates on a string value rather than a list
variable.
[ChangeLog][qmake] Added $$str_size() function.
Change-Id: I56c8b863da244e66bd283257a66b197aa73b0e57
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
amazing how we managed to do without it for so long. ^^
the name is intentionally somewhat obscure to avoid clashes, and some
namespacing is good anyway.
[ChangeLog][qmake] Added $$num_add() function.
Change-Id: Ib7648b1f425ef096a87b51f158d0f1409e5c4daa
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
while implementing stacks and queues was possible before with the help
of $$member(), these functions make it much more straight-forward.
[ChangeLog][qmake] Added $$take_first() and $$take_last() functions.
Change-Id: I4922a5331780e468a42c663c9ad3c6456a95a6bf
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
we have perfectly good overloads which work with ProString itself, or
at least with QStringRef.
Change-Id: I45f39b8c2f83216f20849dd58eb3b8d78726083d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this also saves some of the cheap but ugly toQString() calls.
Change-Id: Iebe644986501db3878306521c76e4ba2c2fb97b4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the only place where this actually saves a deep copy is the evaluation
of if(), but as a side effect the parser is now able to deal with not
null-terminated strings, which is kinda nice as well.
Change-Id: Ib6d08617aa79d2f9eaecd4906d4d548f34bf377d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
saves some more cheap but pointless conversions to QString.
this makes the introduction of the ProStringList::contains(QStringRef)
overload necessary.
Change-Id: Ic61993bd9a4b28fbba1b8e346345fd5f5636c6f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this introduces an ambiguity, so some char* arguments need explicit
QString construction now.
Change-Id: Ic3919a1fa9419bbb3b57dd1aa7eb95643ee59e53
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In order to avoid loading and checking all fonts on the system when
the string contains a line separator, we blacklisted it in
98a23b974509bd1b6d9459e6c79677bdcbaa0108 in Qt 4. The same logic
applies for paragraph separators, line feeds and carriage returns.
Task-number: QTBUG-51934
Change-Id: I121dce17a8ac79b5b790e24c6596438e501e871a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Adds overloaded functions for some common operations used for
compositing, and use those together with specialized loading/storing.
QRgba64 is represented as a quint64, so most of the time it lives in
the integer registers. By overloading functions to return SIMD data
types, the temporary values are kept in SIMD registers (so no more
unnecessary transfers between the registers, which can cost a lot on
ARM). It also allows the compiler to do better TBAA and optimizations.
Another benefit is that the loop bodies are smaller, giving them a
higher chance to fit in the micro-op cache of modern CPUs.
Change-Id: I5f13cd0677176b1162425fe59d42868d0d20f6e2
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Profiling QIconLoader::findIconHelper() shows that a significant portion of CPU time is being spent in
QDir::exists(), which creates a new QFileInfo object for the sole purpose of determining whether the passed-in
file path is relative or absolute, and then calls QFile::exists(). In this context, we can just as easily
generate the absolute path and call QFile::exists() directly, avoiding the creation of extra QDir and QFileInfo
objects.
Change-Id: Ib0b4568b6c16d423eb6c1b15158e44ff141e6175
Task-number: QTBUG-46767
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Just leave it to the attached debugger to do it.
Change-Id: I65f2676cccec2a074ea31cb8739e1b3fb626a5da
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If applicationDisplayName has not been set, the signal is emitted when
applicationNameChanged() is emitted.
[ChangeLog][QtGui][General] Add
QGuiApplication::applicationDisplayNameChanged() signal.
Task-number: QTBUG-53076
Change-Id: I18494ad90bd8dec3f79ef5175a3a85e776560fd0
Reviewed-by: David Faure <david.faure@kdab.com>
This info wasn't really very helpful, and would anyway always
contain either Preview, OpenSource or an empty string for
commercial users.
Change-Id: I311b991834fa83cf1a183083acd5112cda3d2e41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
QIOSTextInputOverlay was excluded from build not member variable was
not, leading to link errors
Change-Id: Ia9c09c503decb596907a17dc8fe8fd0f8d5f657f
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Both checks are not relevant in Qt's context and were skipped before but
they sneaked back in with the latest ANGLE update.
Change-Id: Ic44de5468a3254afd76ef4804d97d245676daeb1
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Affects systems like the NVIDIA DRIVE CX. This did not show up so far
because there was no error when Q_PROCESSOR_ARM was not set.
Task-number: QTBUG-53493
Change-Id: I107155b6dc1a881eca6f57374ad8db4458875243
Reviewed-by: Dominik Holland <dominik.holland@pelagicore.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
8c3ae221 introduced a mean to actually close an application. Otherwise
the application was in an undefined state and did not exit.
Since 5.6 we switched to Xaml and the explicit call to Exit() is not
required anymore. This also allows using multiple application objects
sequentially as the unit tests do in some cases.
Change-Id: I9030afec72a4534e818c77c373dc3a81b922a480
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Makes it easier to apply similar changes across all related functions,
and to implement functions for new types by having the previous
approaches available in one place.
Change-Id: I3f0590d67d0e6deb1c6c856ab1de96b55b6af058
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Apple Mail will pick up and attempt to use the vCard
flavor, which then fails since the data Qt placed
on the clipboard is not actually a valid vCard.
Place data in the vCard format on the clipboard
only if the mime type is “text/vcard”.
[ChangeLog][OS X] Pasting text from Qt applications
to Apple Mail now works.
[ChangeLog][OS X] “text/vcard” is now required as
the mime type when placing vCards on the clipboard.
Task-number: QTBUG-48953
Change-Id: Id029b20317f2c5ad8ae225912484de3c97498d29
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Thiago Macieira
Andy Shaw
J-P Nurmi
Milla Pohjanheimo
Lorenz Haas
Topi Reinio
Milla Pohjanheimo
Erik Verbruggen
Mikkel Krautz
Timur Pocheptsov
Oswald Buddenhagen
Eskil Abrahamsen Blomfeldt
John Lindgren
Benjamin Terrier
Liang Qi
Lars Knoll
Mike Krus
Oliver Wolff
Laszlo Agocs
Maurice Kalinowski
Tor Arne Vestbø
Morten Johan Sørvig