After QPoint(F), it's now the time of QSize(F) and QVectorND,
which can be unambiguously decomposed.
[ChangeLog][QtCore][QSize] QSize is now usable in a structured
binding declaration.
[ChangeLog][QtCore][QSizeF] QSizeF is now usable in a structured
binding declaration.
[ChangeLog][QtGui][QVector2D] QVector2D is now usable in a
structured binding declaration.
[ChangeLog][QtGui][QVector3D] QVector3D is now usable in a
structured binding declaration.
[ChangeLog][QtGui][QVector4D] QVector4D is now usable in a
structured binding declaration.
Change-Id: I67bb152f4210f2be27607179cd2ec522174cc483
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Only RGB444 and RGB666 were treated slighlty different from the rest,
but the test had a few additional mistakes.
Pick-to: 6.1 6.0 5.15
Change-Id: I4728b4036affedfffce8bca5c1e7be3869344fbe
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When changing transferfunction the look-up-tables needs to be
regenerated.
Pick-to: 6.1 6.0 5.15
Change-Id: I83ca5fe570f85d478a374f52c0a82db84e70c3b8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A few formats were not treating the input QColor correctly. Fixed and
added more exhaustive test.
Pick-to: 6.1 6.0 5.15
Change-Id: I872aeeb45e518f9a34b4ac35642264821f9927f2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Calculate the effective width of the hyphen better, and compare with
ceiled sizes.
Pick-to: 6.1 6.0
Fixes: QTBUG-90698
Change-Id: I7ed2eb44c54240ecb2f8a38e5acf1f32608b2bfb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Different font was used when running on QEMU ARMv7 and the second page
was never reached.
Pick-to: 6.1
Task-number: QTQAINFRA-4127
Change-Id: Ic85b76661cf3642b69e6e1b21e8062d7c36231e3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
As described in 3279c8e7d7, we can't
depend on the widths of decoration to always be the same for
drawText() and equivalent drawStaticText/drawGlyphRun.
This is typically visible as an off-by-one when using the default
fonts on OpenSUSE.
Since this test was actually made to test positions of RTL glyphs,
we can just disable the decoration and simplify the text.
Fixes: QTBUG-89086
Change-Id: I139fe3e1c5e98d8b1d7e0e7c19645fd4717d1d95
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This was added by 9ff76c27b9 on
the basis that it signifies a shaping error and would later assert
or crash.
But the line is easily reachable by user code. If Harfbuzz returns
0 glyphs, it just means it is unable to shape the string, for instance
if the input string only contains default ignorables (like a ZWJ)
and does not have any appropriate glyph to use for replacement.
Qt expects there to always be at least one glyph in the output
(num_glyphs == 0 is used to indicate shaping is not yet done), so
to avoid asserts later on, we simply populate the output with a
single 0 token, which is a required entry in the font that is
reserved for representing unrepresentable characters.
This also adds a test and therefore a zero-width joiner to the test
font to reproduce the issue.
[ChangeLog][QtGui][Text] Fixed a possible crash with certain fonts
when shaping strings consisting only of control characters.
Fixes: QTBUG-89155
Pick-to: 5.15
Pick-to: 6.0
Change-Id: Ia0dd6a04844c9be90dcab6c464bebe339a3dab11
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
With the updated QEMU and toolchain, these tests now pass.
Change-Id: Icb74562a0e6422cd4564f63db991aa431e0e3119
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Make use of the device pixel ratio in the QIcon paint method so the @nx
hi-dpi pixmaps are selected when appropriate when painting to a
QPainter.
Pick-to: 6.0
Fixes: QTBUG-90042
Change-Id: I53995a2285ef879e3c4fddb9f8da702e256a260f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Initialize the offscreen platform plugin with no screens,
create QGuiApplication object.
Not much of the high-dpi related Qt API can be used
in this configuration, but at least Qt should not crash
on startup.
Task-number: QTBUG-71034
Change-Id: I6620843c3bd8b692c5c2419b1ba290e16175ba5b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Add QRhi APIs to retrieve and reload the contents of the "pipeline
cache".
The only API where there is a true pipeline cache is object is Vulkan
(VkPipelineCache). For OpenGL, the other backend where we support this,
it is simulated with program binaries. The Qt 5 style OpenGL program
binary disk cache continues to work like before, but one has now the
option to do things in a more modern, graphics API agnostic way, that
leads to generating a single blob instead of a large set of files in
some system location, allowing easier "pre-baking" of the cache content.
It is expected that Qt Quick exposes the two new functions in form
if QSG_RHI_ environment variables, thus allowing easy testing and
cache file generation.
As an example for the performance improvements this can give, consider
Vulkan, where we do not have any existing persistent caching mechanism
in place:
Running BenchmarkDemoQt6.exe --scene flythrough --mode demo creates 18
QRhiGraphicsPipeline objects from Qt Quick and Qt Quick 3D.
The total time spent in QRhiGraphicsPipeline::create() during application
startup for these 18 pipelines is 35-40 ms on a given Windows (NVIDIA)
system.
When exporting the pipeline cache contents to a file, and then, in a
subsequent run, reloading the cache contents, this is reduced to 5-7 ms
on the same system, meaning we get a 6-7x improvement.
The generated data is always specific to a given Qt version, RHI
backend, graphics device, and driver version. Much of the implementation
consists of adding and verifying the appropriate header to the blobs
retrieved from the driver, to allow gracefully ignoring data that was
generated with a device or driver that differs from the one used at
run time. This should provide robustness, even if the Vulkan or OpenGL
implementation is for some reason not prepared to identity and reject
incompatible cache/program blobs.
Fixes: QTBUG-90398
Change-Id: I67b197f393562434f372c7b7377f638abab85cb3
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...when the platform does not support Vulkan. The version is left
at the default 0 then, so checking for >= 1.0 is wrong.
This allows the test to pass with the offscreen platform plugin.
Change-Id: I5afba8f1e703e4fa0ff41da91d18f5fabfb54868
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This also needs improvements to qvkgen. What we get with this patch
are the Vulkan 1.1 and 1.2 core API's additional 11 instance-level
and 30 device-level commands present in QVulkanFunctions and
QVulkanDeviceFunctions.
All of these are attempted to be resolved upon construction. When the
implementation does not return a valid function pointer for some of them
(e.g. because it is a Vulkan 1.0 instance or physical device), calling
the corresponding wrapper functions will lead to unspecified behavior.
This is in line with how QOpenGLExtraFunctions works. The simple
autotest added to exercise some Vulkan 1.1 APIs demonstrates this in
action.
The member functions in the generated qvulkan(device)functions header
and source files are ifdefed by VK_VERSION_1_{0,1,2}. This is essential
because otherwise a Qt build made on a system with Vulkan 1.2
headers would cause compilation breaks in application build environments
with Vulkan 1.0/1.1 headers when including qvulkanfunctions.h (due to
missing the 1.1/1.2 types and constants, some of which are used in the
function prototypes). In practice this should be alright - the only
caveat to keep in mind is that the Qt builds meant to be distributed
to a wide variety of systems need to be made with a sufficiently new
version of the Vulkan headers installed, just to ensure that the
1.1 and 1.2 wrapper functions are compiled into the Qt libraries.
Task-number: QTBUG-90219
Change-Id: I48360a8a2e915d2709fe82993f65e99b2ccd5d53
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Instead, have a static function in QRhiVulkanInitParams then Qt Quick
and anyone else who creates a QVulkanInstance that is then used in
combination with QRhi can query.
Change-Id: I046e0d84541fc00f5487a7527c97be262221527f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...as described in the Vulkan >= 1.1 spec. One can now call
supportedApiVersion() (before create(), similarly to the other
supported* functions) to determine the available Vulkan
(instance-level) version.
Fixes: QTBUG-90333
Change-Id: Ibe8482402b7f07e4abc48c88252ff0365e4e2faa
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QGuiApplicationPrivate::processMouseEvent() sends a
QWindowSystemInterfacePrivate::TouchEvent if the mouse event is not
accepted and AA_SynthesizeTouchForUnhandledMouseEvents is enabled.
A QPA TouchEvent always contains native touch points, which is why
it calls QWindowSystemInterfacePrivate::fromNativeTouchPoints to
translate the QMouseEvent's device-independent position back to the
raw position that it would have had if it came from a real touchscreen.
Therefore we must give that function touchpoints that are actually in
native coordinates.
It may be that some of this transformation could be avoided entirely,
but here we prove that the existing way works correctly, by adding
coordinate checking to the tst_QWindow::mouseToTouchTranslation() test.
Pick-to: 6.0
Task-number: QTBUG-86165
Change-Id: I4c9ca2b11e9eb76d79712c187db3eb9865da581a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Android and Wasm do not build the offscreen platform
plugin (see src/plugins/platforms/CMakeLists.txt).
Skip building the tst_qhighdpi test as well in this
case. Remove the BLACKLIST entry.
Task-number: QTBUG-88505
Change-Id: I172198c8c24759b14f73ad07260c449fc6ab893f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
From QRhi's perspective this consists of two things:
- A shader with samplerExternalOES in it cannot go through the standard
pipeline. Rather, a QShader with suitable GLSL code in it has to be
constructed manually. As this is something useful as an autotest
anyway, add a test case to the qshader autotest that demonstrates
this.
- When it comes to correctly calling glBindTexture, add a QRhiTexture
flag. The expectation is that an OpenGL-only client sets this in
combination with QRhiTexture::createFrom(), thus wrapping an existing
texture that then gets bound to the GL_TEXTURE_EXTERNAL_OES target
instead of our usual GL_TEXTURE_2D.
For completeness we also add a SamplerExternalOES variable type to
QShaderDescription, but the sampler type is not actually used by the
QRhi OpenGL backend, as it is the QRhiTexture that defines the
texture target.
Change-Id: I36b52325deb3703b59186ee3d726d0c3015bfc4b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...to the extent it is sensible. We have to make compromises still,
meaning some fields will only be applicable with certain APIs.
Most of this is already shown upon QRhi::create() as info debug
prints, when enabled. Now expose it all through the QRhi API as
well.
This is useful for printing in qtdiag, and, while it should be
avoided as much as possible, to make decisions about disabling
3D rendering features depending on the driver and GPU in use.
Change-Id: Iebe1e192965c928b82a094d1c7c50ddf4b38b9a2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QTextDocument and the text editor classes suggest to override
their loadResource() methods to provide data associated with
a text document. This approach has the following drawbacks:
- it requires subclassing
- there is no way to set a global resource provider
- QLabel is missing virtual loadResource() method and
it can't be added without breaking ABI
QUrlResourceProvider is designed to solve these issues.
One should create a derived class that implements
QUrlResourceProvider::resource(). The objects of the derived
class then can be set for any text document.
The default resource provider can be set with
QUrlResourceProvider::setDefaultProvider().
This change also adds QLabel::setResourceProvider(),
which doesn't break ABI.
[ChangeLog][QtGui][Text] Introduced QUrlResourceProvider that allows to
load resources for HTML. It is intended to replace the use of
QTextDocument::loadResource().
Change-Id: Iaf19b229f522a73508f20715257450fe58f68daf
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
With the introduction of QKeyCombination, the result of |'ing together
a set of modifiers and a key goes always through the same QKeySequence
constructor, no matter the order.
The implicit conversion through int when the wrong order is used
causes a compiler warning as that conversion is deprecated. So remove
that test case.
Pick-to: 6.0
Change-Id: I04e27bcd51723ee0efc77e52e45ca3eb8bac5fc7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Most tests fail when running on QEMU ARMv7, but not on target HW or
QEMU ARM64.
Task-number: QTBUG-89819
Change-Id: I686268c200cce1a44a717b80c2970f608be44636
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Blacklist qfont tests that don't work correctly with qemu.
Task-number: QTQAINFRA-3836
Change-Id: I7f5d4b07428febb0adb82d38203226b5c56a2ad5
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Apparently some library definitions went overboard, link them directly.
Pick-to: 6.0
Change-Id: I009737f7e3edff5619241b700a627dc4e25e6018
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is the most basic way to represent custom transfer functions.
Change-Id: I529fb647ece82c03e85ef77b056d9daf13fe5a61
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QColors were not premultiplied before being set.
Pick-to: 6.0 5.15 5.12
Change-Id: Id3765b6932a72374ddfd788fae4bb628a4edf0b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If the first font in the families list happens to have been
disambiguated because of duplicates, two things went wrong:
1. hasFamily() would return false for the font family, because
it does not disambiguate when checking for the family name and
only checks if the families list contains the exact string.
2. Adding aliases to the full disambiguated string is not supported,
only the family name.
The first issue has been reported separately as QTBUG-89068.
The test failure is fixed by just avoiding the fonts that
are ambiguous in the test, as it really doesn't matter which
font we pick.
Fixes: QTBUG-89008
Pick-to: 5.15 6.0
Change-Id: I829778c2e7bb6090475c34dcf9cdce58862729d6
Reviewed-by: Liang Qi <liang.qi@qt.io>
This patch disables four failing unit tests when executed with the
offscreen backend.
Change-Id: Ie67341b886984e6de19cd8dd8a8a237a620a1b7a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The former also does fuzzy comparison, but it reports what the values
were, if the test ever fails.
Change-Id: I36ecda1f69bf3f430c904b37cd8c3a23201ab7e2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
QTextCharFormat::fontFamily is deprecated in favor of fontFamilies,
which returns a QStringList wrapped in a QVariant, whereas the setter
expects a QStringList.
Change-Id: I3333eaae4fc5ec3e3bdbec58047d6b3554b4a171
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Make the string into a list and call setFontFamilies.
Pick-to: 6.0
Change-Id: I1b70db784fd6e495b48917141d07bacd1e883882
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Not testing the result of the copying, just verifying that it doesn't
assert.
Pick-to: 6.0
Change-Id: Ib51129134b74c17eada7e3819ccfff10bb9affbf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The QFont::fromString() needs to differ between strings
produced before and after Qt 6.0 when interpreting the
weight value, since in older strings this will be the legacy
scale.
Luckily the number of tokens in the string can be used for this
purpose, since many tokens were added in Qt 6.0.
This broke KDE, where font settings are stored in QSettings
and serialized using QFont::toString() from Qt 5.
Fixes: QTBUG-88589
Pick-to: 6.0.0 6.0
Change-Id: I199737fed61917f8b9d8f86176ead29a89eb8e0c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
By depending on setFamilies() then we can be sure that font names with
spaces, commas, quotes and so on are correctly handled without being
misinterpreted. For now it will split on the comma when a string
containing one is passed to setFamily. But from Qt 6.2 this will be
removed to preserve the family string as a convenience function.
[ChangeLog][QtGui][QFont] Indicated that setFamilies/families is
preferred over setFamily/family to ensure that font family names are
preserved when spaces, commas and so on are used in the name.
Change-Id: Id3c1a4e827756a4c928fed461a4aafa5a0f06633
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This reverts commit ee122077b0.
Reason for revert: This causes QProcess::readAll() to sometimes
return nothing after the process has ended.
Fixes: QTBUG-88624
Change-Id: I34fa27ae7fb38cc7c3a1e8eb2fdae2a5775584c2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
(cherry picked from commit 23100ee61e33680d20f934dcbc96b57e8da29bf9)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Ensure the values are reasonable regardless of screen DPI. Velocity
is supposed to be in logical pixels / second.
Task-number: QTBUG-88252
Task-number: QTBUG-88346
Change-Id: Ic209887f8ed0381c033a9ff04ae48b072c444df4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
A QWindow created without an explicit geometry needs to pick up
a default geometry in the platform plugin. If the window has a
maximized of fullscreen window state, it will fill the entire
available geometry of the parent window (or the screen if there's
not parent window).
Fixes: QTBUG-69159
Fixes: QTBUG-69156
Fixes: QTBUG-69154
Pick-to: 5.15
Change-Id: If8565d92a97bb4b3fa44757e68969d54d0bc7ebe
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution , but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I1cd87c07db39f3b46a2683ce236d7eb67b5be549
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Tests in tst_qhighdpi are crashing on Android.
Task-number: QTBUG-88505
Task-number: QTBUG-87025
Change-Id: Ie1350e06fb30d90f20c550f91555f4023eee56b6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These tests are failing with "java.lang.UnsatisfiedLinkError: dlopen
failed: invalid ELF file" at the start, excluding them now to enable
Android testing until they're fixed later.
Task-number: QTBUG-87671
Task-number: QTBUG-87025
Change-Id: Ida7d7158fccdc31df1f9689f77fde832964d732f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QChar should not be convertible from any integral type except from
char16_t, short and possibly char (since it's a direct superset).
David provided the perfect example:
if (str == 123) { ~~~ }
compiles, with 123 implicitly converted to QChar (str == "123"
was meant instead). But similarly one can construct other
scenarios where QString(123) gets accidentally used (instead of
QString::number(123)), like QString s; s += 123;.
Add a macro to revert to the implicit constructors, for backwards
compatibility.
The breaks are mostly in tests that "abuse" of integers (arithmetic,
etc.). Maybe it's time for user-defined literals for QChar/QString,
but that is left for another commit.
[ChangeLog][Potentially Source-Incompatible Changes][QChar] QChar
constructors from integral types are now by default explicit.
It is recommended to use explicit conversions, QLatin1Char,
QChar::fromUcs4 instead of implicit conversions. The old behavior
can be restored by defining the QT_IMPLICIT_QCHAR_CONSTRUCTION
macro.
Change-Id: I6175f6ab9bcf1956f6f97ab0c9d9d5aaf777296d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's unnecessary, and copying QEvents is a bad practice since it's a
polymorphic class.
Change-Id: Ieb6de106084f838c5e6c8a0643c54fd3c7f4a7a8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The dot product used rows instead of columns.
Pick-to: 5.15 5.12
Fixes: QTBUG-87984
Change-Id: I922f67ed0fa9a4f88aa4e9fc6d3c09f8dda21688
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The logic in qgrayraster was ready for it except for an intermediate
format. qrasterizer.cpp and qcosmeticstroker.cpp uses a dot-16 fixed
point format, and had to be changed to handle higher coordinates on
64-bit architectures.
Fixes: QTBUG-84428
Change-Id: I85ab7a04e38bd0dbcefa9f16c16ccc84785a33cf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Bring QPixmapIconEngine on par with QIconLoaderEngine
when it comes to @Nx pixmap handling: Make the scale
factor a test parameter during icon lookup.
This allows storing e.g 16x16@1, 16x16@2, 16x16@3 versions
of a pixmap in the icon, and then having QIcon select
the correct one based on the target devicePixelRatio.
Extend the qiconhighdpi test to also cover QPixmapIconEngine,
via the addPixmap() API.
The corner cases of pixmap lookup can be much complicated.
QIconLoaderEngine and QPixmapIconEngine should ideally
have identical behavior in order to avoid surprises.
Change-Id: I17552cc61755bff9553c4a462e3983ac6759c13b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The type is specific about printing, so give it a name in line with
QPageLayout and QPageSize.
As per API review comment, it's not clear why this type should not be a
regular, copyable and movable value type. It stores a list of intervals.
Give it value-type semantics, as an implicitly shared class.
Convert the parse method into a static factory function.
Add a Range type and use it instead of the semantic-free QPair.
Move QPrinter getter into QPagedPainteDevice, make it return a copy
rather than a pointer, and add a setter.
Extend test case to cover all members and more merge cases. Fix bugs
found that way.
Fixes: QTBUG-88113
Change-Id: If17ea4d410d49f16b097e88b7979db5d72add820
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
MarkdownDialectGitHub now includes this feature, so *emph* is italicized
and _emph_ is underlined. This is a better fit for QTextDocument capabilities;
until now, _underlined_ markdown could be read, but would be rendered with
italics, because in CommonMark, *emphasis* and _emphasis_ are the same.
But QTextMarkdownWriter already writes underlining and italics distinctly
in this way.
[ChangeLog][QtGui][Text] By default (with MarkdownDialectGitHub), markdown
_underline_ and *italic* text styles are now distinct.
Fixes: QTBUG-84429
Change-Id: Ifc6defa4852abe831949baa4ce28bae5f1a82265
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This makes high-level event dispatching easier: for example we often
need to cast an event to access getters like button() and buttons().
We can so far assume that any QPointerEvent that is not a QTouchEvent
is a QSinglePointEvent; but more explicit type-checking looks safer.
Implemented in a similar way as c7f7279969.
Change-Id: I980d759e2a7538b6b30fd3bdc3be0c351ec6c246
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There’s no need to convert the file name/path to QUrl,
and then back again to QString before calling qt_findAtNxFile().
Call qt_findAtNxFile first, and then convert to QUrl.
This makes sure the url-name and string-name stays
in sync.
Change-Id: I8b8939eabbdaff473945ebe31faafd408e9c4295
Pick-to: 5.15
Fixes: QTBUG-60793
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In 4e400369c0 we deprecated
normalizedPos() because we suspect it's a legacy feature that few
users will need. However Qt developers keep bringing up the continued
usage in autotests over and over. (It's IMO not wrong to keep testing
deprecated functions in autotests, but the warning keeps attracting
attention.)
Of course it will turn out that normalizedPos() has users; we just
don't know how many. One way to look at it is: why should they copy
a snippet of code to calculate it, when it costs us so little to
continue to provide this accessor.
It might also turn out that some users will complain that in Qt 5
it was passed through from the device driver (or at least from the
window system API) to the application, and perhaps the replacement will
not always work, for example if availableVirtualGeometry() ends up
wrong, or there is some strange scenario that generates events that are
out-of-bounds for the device that the event professes to come from, so
that the "normalized" coordinates also go outside the [0..1] range.
We reserve the right to put back the storage in QEventPointPrivate if
the need arises; so that's why this function is not inline.
We continue to hope that startNormalizedPos() and lastNormalizedPos()
are used even less and won't be missed much, because it would be
wasteful to store them all the time if only a few users need them.
Change-Id: I23ed78843e3f9e16133c5b6f462884a3845f91b6
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
All QFontDatabase APIs are static, use them accordingly.
Task-number: QTBUG-88114
Change-Id: I0e4a7508646037e6e2812611262eed8b6d7ad3de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Keep this in sync with the changes we have done in QTypeInfo.
Change-Id: Iaacb0f3cc5c46d3486084a1f6eca480a233d5e1a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
In Qt Quick, when we deliver an item-specific QTouchEvent that contains
only the subset of eventpoints that are inside the Item's bounds,
traditionally the Item can accept the event to tell the delivery logic
that the event is handled and doesn't need to be delivered further.
But an Item cannot be expected to have total scene awareness; so now,
the delivery is "done" only when all eventpoints in the original event
are accepted. This behavior has been working well enough already due to
logic in QQuickWindow that iterates the points and accepts them if the
event is accepted; but it seems appropriate to move this enforcement
into QPointerEvent itself. Making setAccepted() virtual gives us a
useful degree of freedom.
Event-handling code should alternatively use QEventPoint:setAccepted()
or QPointerEvent::setExclusiveGrabber() to take resonsibility for only
a subset of the touchpoints.
Another way to put it is that we treat QPointerEvent::setAccepted() as a
convenience method: accepting the QEventPoints is what counts (at least
in Qt Quick).
Change-Id: Icec42dc980f407bb5116f5c0852c051a4521105a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Leave the normalizedPos warnings, there is no equivalent function.
Change-Id: I50c72ab24b4855e36941aafdee30cdb0e94c1684
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Expose event would not be sent when window was resized
Fixes: QTBUG-69155
Pick-to: 5.15
Change-Id: I81bf2d54f830a0dabf15398e1f25b55ff7ff4479
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Failure to copy m_inputEvent and m_pointerEvent actually left them
uninitialized, and resulted in random behavior in Qt Quick when
Flickable clones a pointer event for later replay.
Remove the comment about copying events being a "bad idea" in Qt 4,
while we're at it. Copying became more common in Qt 5, and we
probably won't be able to stop doing it now.
Change-Id: I40b6ba5ad696e7aaafbeefbca86eca00cab40616
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the factor() test, drop scale() which should be
covered already.
Change-Id: Id2079536a91c7e9f7199960bdf6b33489d0a6670
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Use the new screen config feature of the offscreen
platform plugin to run tests on virtual screen setup.
This has the benefit that we can auto-test the QHighDpiScaling
implementation (as well as its usage in QtGui) on any platform
with a fixed mock screen setup which does not rely on physical
screen configuration.
Test the following configurations:
- three screens: 96 DPI. (reference)
- three screens: 192 DPI
- three screens: mixed (high) DPI
Change-Id: I2fac889d896cf30ab2a79c306cee22177ad8f4ac
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The return value can be ignored here, so make intention clear.
Change-Id: I116869c47039b159db96f133b5850a2215873c2f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Tests the move semantics of QImage in Qt6.
Change-Id: Ia4d95f0b88ca7dde0daf85a0f53049b42b5be1a5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
If the difference between the families sizes is just 1 where one of them
is 0 in size then we can fallback to the family in that case.
Pick-to: 5.15
Fixes: QTBUG-87267
Change-Id: I62b25b06c88000b4d7defe91871c07873b1fc792
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The original restriction to UniformBuffer was due to the GL backend
where there is no GL buffer object for QRhiBuffers with usage
UniformBuffer. However, we can still implement this for cases when
there is a true GL buffer object underneath. With other backends it
should all work as-is already.
This becomes useful when one has buffers with usage Vertex that need
full updates every frame. (f.ex. instance data)
Unfortunately this involves renaming the function. But while at it, add
an autotest case as well.
Change-Id: Iff59e4509a8bae06654cc92fe8428bd79eb012fb
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We were already using the 'native' nomenclature when referring to these
kinds of APIs, e.g. when talking about native handles, or the existing
QPlatformNativeInterface on a QPA level. Using 'native' for the user
facing APIs also distinguishes them from the 'platform' backend layer
in QPA and elsewhere.
Change-Id: I0f3273265904f0f19c0b6d62471f8820d3c3232e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
During delivery of a TouchBegin event, if no widget accepts it,
we begin treating the first touchpoint as a synth-mouse, as before.
If a second touchpoint is pressed or released in any order, it's
irrelevant: the fake mouse button is released as soon as the first
touchpoint is released. This fixes the bug that such a scenario
caused the mouse release not to be sent, so that a widget could get
"stuck" in pressed state.
Done-with: Tang Haixiang <tanghaixiang@uniontech.com>
Fixes: QTBUG-86253
Pick-to: 5.15
Change-Id: I7fbbe120539d8ded8ef5e7cf712a27bd69391e02
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reports on the Web have it that there's nothing guaranteeing a
driver does any actual freeing of resources then doing
vkFreeCommandBuffer for a command buffer from a command pool that
does not have VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT, thus
leading to continuously growing resource usage with our current
allocate/free pattern. It could be that this is the source of out
of memory problems we are seeing on some Android devices.
Instead of just going straight for said command pool flag and doing
ResetCommandBuffer for the command buffers individually, take one
step further and use per-slot (slot being 0 or 1 if QVK_FRAMES_IN_FLIGHT
is 2) command pools. The current pool is reset in each
beginFrame/beginOffscreenFrame, moving all allocated command buffers
to the initial state (while other command buffers with the other pool
are not affected).
This may be (while impossible to tell from just guessing based on the
spec) our best approach to command buffer allocation since a Vulkan
implementation can likely just use some simple per pool allocator,
knowing that we never want to free or reset individual command buffers,
but we rather only reset the whole pool at once.
The option of importing an existing VkCommandPool when creating the
QRhi instance is now gone, but there was probably no point in offering
that in the first place.
When it comes to VK_COMMAND_POOL_RESET_RELEASE_RESOURCES_BIT it will
not be set unless releaseCachedResources() (in Qt Quick this is hooked
into QQuickWindow::releaseResources()) was called. What this does in
practice is unknown, but have an option to set it now and then if the
application really wants.
While we are at it, rename secondaryCbs to activeSecondaryCbStack to
indicate what it really is. (it's a stack as each call to
beginExternal() pushes a new one, while each endExternal() pops)
Change-Id: I2e5c1fad26d794e1f56c778e38f750998d706d84
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
ExternalContentsInPass becomes a per-pass flag now. Why is this
beneficial? Because while Qt Quick has no choice for its render
pass, not being able to guess if the application wants to do some
native rendering in there, Quick 3D's render passes, all the ones
that are under Quick3D's control, do not have native rendering
from the application in them, and so using secondary command
buffers with Vulkan is not necessary.
Introduce something similar for compute and OpenGL. By knowing that
none of the resources used in a pass are used with a compute pass
(e.g. because we know that there are no compute passes at all) a small
amount of time can be saved by skipping tracking buffers and textures
because the only purpose of said tracking is to generate barriers that
are relevant only to compute.
Change-Id: I0eceb4774d87803c73a39db527f5707a9f4d75c1
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
It also demonstrated that the tests were out of sync with reality:
since a97759a336c597327cb82eebc9f45c793aec32c9 QMouseEvent::button()
and QWindowSystemInterfacePrivate::MouseEvent::button should be the
button that changes state of course; but when a button is pressed,
we are reacting to it after the fact, so QMouseEvent::buttons() and
QWindowSystemInterfacePrivate::MouseEvent::buttons should include the
new button that was just pressed. Likewise when a button was released,
we send the event with buttons _omitting_ the button that was just
released.
Amends 147a8bc4c8 and
6d6ed64d6c
Change-Id: I670289019fcfa7de685ca38799804772dc0f1c8f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This reverts commit b1ef104866.
This test is BPASS on openSUSE_42_3 for 5.12 and PASS on openSUSE_15_1
for 5.15.
Pick-to: 5.15
Pick-to: 5.12
Change-Id: Ia1d81ed38491c27c01f270623c5082663f4da699
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Giuseppe D'Angelo
Allan Sandfeld Jensen
Samuli Piippo
Volker Hilsheimer
Eirik Aavitsland
Jonas Karlsson
Eskil Abrahamsen Blomfeldt
Sona Kurazyan
Bastien Bouclet
Morten Johan Sørvig
Laszlo Agocs
Shawn Rutledge
Joerg Bornemann
Alexander Volkov
Liang Qi
David Skoland
Friedemann Kleint
Alexandru Croitor
Andreas Buhr
Edward Welbourne
Andy Shaw
Kai Koehne
Piotr Mikolajczyk
Alex Trotsenko
Assam Boudjelthia
Lars Knoll
Tor Arne Vestbø