With nested popup widgets, pressing a mouse button on the lower
popup will close the active popup. MouseMove events that are generated
before the button is released again should not have that button
included, as it is likely to result in incorrect state handling in
the widget. This change removes all buttons from the MouseMove event,
which is the second best option.
This is mostly consistent with the behavior when closing a popup and
no other popup remains. The widget underneath will get MouseMove
events without the respective button included.
This change doesn't include a fix for the final release event, which
should ideally also not be delivered to the remaining popup, as it
never got a corresponding press event. Qt has already reset the states
in which it stores which widget received the press event at the time
the release is generated, such as qt_button_down and qt_popup_down.
So we can't separate a release grabbed by a newly opened popup (which
we want) from a release to the popup that became active after closing
(which we don't want).
However, widgets can more easily work around this issue, and the risk
of breaking things by changing the code further becomes too high.
Change-Id: I603bbdbc7e7355952d96ab77c5e2d2f1e6f94987
Fixes: QTBUG-82538
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Images are rounded up to 4 bytes per line minimum, so one pixel wide
images might not shrink when resizing.
Fixes: QTBUG-83179
Change-Id: If72c94409e4c899c5ad05b2867f5f53a94d0580f
Reviewed-by: Christian Kamm <mail@ckamm.de>
This amends b3e4be2d8b.
When building testlib with QtGui linked:(use "QT = core-private gui"
in src/testlib/testlib.pro)
Undefined symbols for architecture x86_64:
"QAbstractItemModelTester::verify(bool, char const*, char const*, char const*, int)", referenced from:
QTestPrivate::testDataGuiRoles(QAbstractItemModelTester*) in qabstractitemmodeltester.o
Change-Id: Ideb10ddd6717fed8d9f91f75bbfc9d5a22104730
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
All 6 getters and setters were deprecated by doc comment \obsolete in
3c159957f8 (Qt 5.9). Now we will generate
compiler warnings too.
Change-Id: I94c6da607fa5758072af1287c9286b6c52179cfb
Reviewed-by: Frederik Gladhorn <gladhorn@kde.org>
When the Wayland client plugin is in use, the capabilities
for the surface may report a minimum image count of 4. The
internal "maximum minimum count" of 3, was arbitrary and
only used for sizing buffers. To be more friendly to different
setups, we remove the restriction and use QVarLengthArrays
instead.
We also set the initial size of the buffers to 4 so that we
can run with Wayland without any resizing, but now the arrays
will also grow to be safe for cases where 4 is not sufficient.
Change-Id: Iba5434e84417d36b70f2655b152e816f04650ce4
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
In 519ea72108, the minimum SDK
version was moved away from the AndroidManifest.xml, and when
the change was merged, we lost parts of the update to set
the minimum version to 23.
This redoes it in the remaining locations.
Change-Id: Iada8188d3c0c8ec0a4801c1d219640ecb3976753
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
(This reintroduces c17a5cec19,
which was reverted in Qt 5 because it requires API level 23.)
This flag tells the app to use as much of the screen as possible
while still keeping system UI visible, and can be supported on Android
by using translucent system UI, similar to iOS.
What this does:
1. It changes the current fullscreen/not-fullscreen logic to
allow three states: fullscreen, fullscreen with translucent
decorations and not-fullscreen.
2. In order for it to work, we have to send the actual
screen geometry and available geometry, at least in the case
where the user needs to know the available geometry to
know the safe area of the window. So we get the real screen
metrics and pass these to the QPA plugin (API level 17, so
we can do that now that the minimum version is 21.)
3. Note that getting the insets and calculating the useable
area does not work for non-fullscreen windows, since Android
is quite inconsistent in this respect. So in this case we
just use the window size and origin of 0,0 for the available
geometry.
4. Since we are touching this code anyway, this patch also tries to use
more consistent wording (calling it "available geometry" everywhere
instead of desktop geometry in some places and just geometry in
others, etc.)
[ChangeLog][Android] Qt::MaximizeUsingFullscreenGeometryHint window
flag is now supported, and will make the window fullscreen, but keep
the system UI on-screen, with a translucent background color.
Fixes: QTBUG-74202
Change-Id: I4cc5ef9cc2a3bd22d4d8d2bb767c6ff8a3aa75c0
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
When doing a shift-select while moving the mouse then the start point
should be based on the start of the current selection and not the
pressed position. If there is no current selection start index, then
we can safely depend on pressed position as this will be the previous
index pressed on.
This resolves an issue introduced by
e02293a76d when fixing QTBUG-78797
Fixes: QTBUG-81542
Change-Id: Ia66c42b220452fdcbc8cfccc05dbc8a3911c3f5e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- Moves QUndo* classes (except QUndoView) from src/widgets/utils to src/gui/utils
- Moves related auto tests from widgets to gui
- Replaces QUndoAction with lambdas that do text prefixing
[ChangeLog][Undo Framework] QUndo* classes (except QUndoView) were moved from Qt
Widgets to Qt GUI.
Done-with: volker.hilsheimer@qt.io
Fixes: QTBUG-40040
Change-Id: I3bd8d4d32c64f8dee548f62159a1df2126da89d8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
and replace with QRegularExpression
Change-Id: Ic692fc0ea24da84dd4b6bb4c8a846c0fcc62c3cb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
If recent versions of libc++ are built with filesystem support disabled,
the filesystem header still is installed., The std::filesystem::path()
constructor is completely defined inline in that header, making the test
pass on such configurations, despite C++17 filesystem not being
implemented.
Test a call to std::filesystem::copy instead, which requires the actual
library implementation to be available as well (on recent libc++).
Change-Id: Id997ab75f3299d8431b13cad871f2901f4d9f6ed
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][Third-Party Code] libjpeg-turbo was updated to version 2.0.4
Change-Id: I7f74af0dc774a2172ff59713613a706e80d5b2cb
Reviewed-by: Liang Qi <liang.qi@qt.io>
Explicitly use the Qt APIs that return QPixmap and QBitmap by value, and
fix the API taking those to use const references rather than pointers
or const values.
Change-Id: I2bb7ad1edb3b65f806f0475fca383e5b9bdb61f3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QShortcut has only one widget specific feature, which is whatsThis; that
is just a QString, so the setters and getters can just as well be in
QtGui.
The widgets specific implementation of shortcut matching and of showing
the whatsThis balloon stays in QtWidgets, in the private implementation.
Using virtual functions in the private we can override the empty default
in QtGui, and by adding a virtual factory function in QGuiApplication,
the correct private is instantiated depending on the kind of application
running.
Change-Id: I09ae4a5482f9fb70940c5e2bfe76d3d7fd710afc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Duplicating the number of classes is a high price to pay to be able to
have some QAction functionality behave differently, or be only available
in widgets applications.
Instead, declare the entire API in QtGui in QAction* classes, and
delegate the implementation of QtWidgets specific functionality to
the private. The creation of the private is then delegated to the
Q(Gui)ApplicationPrivate instance through a virtual factory function.
Change some public APIs that are primarily useful for specialized tools
such as Designer to operate on QObject* rather than QWidget*. APIs that
depend on QtWidgets types have been turned into inline template
functions, so that they are instantiated only at the caller side, where
we can expect the respective types to be fully defined. This way, we
only need to forward declare a few classes in the header, and don't
need to generate any additional code for e.g. language bindings.
Change-Id: Id0b27f9187652ec531a2e8b1b9837e82dc81625c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
as we raised the minimum requirement for harfbuzz to version 2.6.0:
* use new HB_SCRIPT values instead of tags
* get rid of deprecated (and no-more-used) callbacks
* replace deprecated hb_ot_tags_from_script() usage with a more
flexible and up-to-date hb_ot_tags_from_script_and_language()
Change-Id: I0eafdd2d2028c353fa3a93f5868efceccd364a70
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When topLeft and bottomRight are different in QAIV::dataChanged(), the
current implementation simply calls QWidget::update() without checking
if the affected cells are visible. This results in a big performance hit
when cells are updated frequently.
Now try to compute the exact update rect by iterating through the
modified indexes.
Fixes: QTBUG-58580
Change-Id: I97de567d494e40ed8cdb1ea1f5b3cf3a2f60455e
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
QByteArray doesn't like it.
Apply the same protection to QString, which we know uses the same
backend but uses elements twice as big. That means it can contain
slightly more than half as many elements, but exact half will suffice
for our needs.
Change-Id: Iaa63461109844e978376fffd15f9d4c7a9137856
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit cf000d080c.
Reason for revert: This API is not needed (anymore) by qtdeclarative.
Change-Id: I8af604c2babe3afc11f183ddb3ce3a9038a456ad
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This reverts commit c6da278271.
This was a 5.15-only change which should not go into 5.14
since it raises the minimum supported emsdk version.
Task-number: QTBUG-83098
Change-Id: I9e15952803f9dfff89b5b4e9caeff5c03dabca27
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QtQml needs the private just for one detail which nobody else should
need it for: Tracking additional dependencies and marking the binding as
dirty. Exporting the private requires hiding some variables and
providing accessors, to compile with MSVC - including the removal of
QVarLengthArray usage. Upside: The binding structure shrinks by 8 bytes
and the encapsulation makes it a little easier to change things without
breaking declarative, ... in the unlikely event ;-)
Also remove setDirty() from the public API as it's not needed by QtQml
and using it is dangerous, because it means that there's a risk of
somebody keeping a reference (count) to the untyped binding from within
the binding closure, which introduces a memory leak.
Change-Id: I43bd56f4bdf218efb54fa23e2d627ad3acfafeb5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When drawing multiple distinct (unconnected) lines (e.g. from
QPainter::drawLines() or a QPainterPath with alternating
movetos/linetos), the dash pattern should not continue from one to the
next, as it should when drawing a connected line (e.g. polyline).
Both the cosmetic stroker and the full stroker does it right, but the
fast rasterizing codepath got it wrong.
Fixes: QTBUG-83048
Change-Id: I3d090f7121726755a0e53cb66b99a5563ac0e1c0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
A read-only text edit with Qt::TextSelectableByKeyboard shows a steady
cursor to indicate to users that they can select the text, but not edit
it. When the control receives focus, it doesn't turn on blinking, but
explicitly sets cursorOn to true.
When focus is lost, then cursorOn needs to be reset to false to make
the cursor disappear, even if the blinking (as indicated by the poorly
named cursorVisible variable) is not on.
Change-Id: I78408b5c50c6ede3f9a7128be7a31b9c6795cf9c
Fixes: QTBUG-83029
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Paint events are delivered with the client rect of the widget, and
this applies to paint-on-screen widgets as well. The same goes for
how the widget repaint manager tracks dirty rects. Internally we
were also calling paintOnScreen() with client rects, so the use
of geometry() in the resize handler was likely a bug/oversight.
Change-Id: I1312ccf77218d1162e0971e4cbabaa80f49c852c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Speed up the QSortFilterProxyModel filtering by only updating the
source_to_proxy entries which are really changed - When proxy intervals
are added or removed, it is not needed to update the proxy_to_source
indexes which were not touched.
Change-Id: I35459ff1b04f4610ec74f4b01d58a71832a9ae22
Reviewed-by: David Faure <david.faure@kdab.com>
This has better support for threaded use, and gets rid of bind use.
This requires emscripten 1.38.37 and above
Task-number: QTBUG-76891
Change-Id: Ic30a6820c2ce945c314751c06cfc356914a71217
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
and instruct to use the ones from the Qt namespace instead.
Task-number: QTBUG-82532
Change-Id: I6a85f5096da8aec925a287beff136b77d113926e
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
and mark QHash::[const_|key_]iterator operators correctly as deprecated.
Change-Id: I01da16254759b9bdb7920709de45a72933d6b5c8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
and tag it in the header file to ensure the documentation is matched.
Change-Id: Id1e7cd395ca0ec337845da9a207bfbf95db01064
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QDoc has trouble applying the \obsolete command for multiple
topic (\fn) commands in one go. Separate them out and expand
the reasoning for deprecation.
Mark the rest of the deprecated functions and typedefs related
to reverse iterators as \obsolete.
Change-Id: I09858efd7e1e5fc890d4f3f063f00c8812fc0b52
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The margin is respected in the sizeHint, but not in the minimumSizeHint.
Since the latter should be the former for a single character (as per the
documentation promising enough space for one character), the margin
calculation needs to be identical.
Adjusting the documentation nevertheless, as there are characters that
won't fit either way. As reported, the permyriad character doesn't fit
even with this fix on macOS, as the core graphics API we are using
doesn't report a glyph-index for U+2031 (so our existing assumption
that 'W' is the widest character is still the best we can do).
Change-Id: I30573960c316cc7b8c9bbe3c3f4c6351792bed36
Fixes: QTBUG-82970
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The way this was done didn't really make sense. The change added
an overload with one additional argument. The deprecation warning
would have now forced everybody to explicitly specify all arguments
to avoid the warning.
Instead, keep both overloads in 5.15, but document them as one method.
Remove the old version in Qt6 and move the default arguments to the
new version.
Change-Id: I738d4d1b99cdf30db53acf14382a00cac74aa10a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This change allows the checked/unchecked state to be detected by screen
readers for all controls with a checkable state.
Task-number: QTBUG-81919
Change-Id: I604151397b4ae21297009c274ffe634723ebe783
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The information about whether a table/tree item may be checked is necessary
to allow the platform code (in particular, Windows UI Automation layer)
to make this information available to screen readers.
Task-number: QTBUG-81919
Change-Id: Id68eea4a004788751404d70567222a2c531578aa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
From clang warning:
qwasmcompositor.cpp:335:13: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
offset += (delta +delta);
Change-Id: Id372dfdd8fda1c705c61a24c26843dfb33fba40c
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
This header only covers a part of what qsimd_p.h does, namely
the compile time detection of simd extensions.
Change-Id: I05f1d987f194a5bec335f2405cc2846fbaa88b66
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's not used in tools at all and fits a lot better in global.
Also fix the qsimd_x86* files to have a proper copyright
header.
Change-Id: Id3d8e7cfcd7769a1ca9f3d8cf6d357a31a99ba40
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Those methods don't modify the CBOR value, they should be const.
Change-Id: I213984ed82e43429413344999a22ad1c4c3beac8
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the map or array is known to be empty, we don't need to allocate a
QCborContainerPrivate.
Change-Id: Ief61acdfbe4d4b5ba1f0fffd15fe212b6a6e77c3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A simple 16k file can produce deep enough recursion in Qt to cause stack
overflow. So prevent that.
I tested 4096 recursions just fine on my Linux system (8 MB stack), but
decided 1024 was sufficient, as this code will also be run on embedded
systems that could have smaller stacks.
[ChangeLog][QtCore][QCborValue] fromCbor() now limits decoding to at
most 1024 nested maps, arrays, and tags to prevent stack overflows. This
should be sufficient for most uses of CBOR. An API to limit further or
to relax the limit will be provided in 5.15. Meanwhile, if decoding more
is required, QCborStreamReader can be used (note that each level of map
and array allocates memory).
Change-Id: Iaa63461109844e978376fffd15fa0fbefbf607a2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The next commit will need to do so from outside QCborContainerPrivate,
where QCborStreamReader::d can't be accessed (private).
Change-Id: Iaa63461109844e978376fffd15fa0f6f04081bf2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... when we are not using the FFD_USE_FORK flag. We use the FFD_USE_FORK
flag when we have user code to run in setupChildProcess(). This code is
enabled for all Unix, but forkfd() honors this flag only on Linux >=
5.4.
See the commit adding the flag for more information on what the flag
does and see the comment in this commit on why it's safe to use it.
Fixes: QTBUG-17331
Change-Id: I1bee3bc466a04f19bd6efffd15f448cb23ce1e91
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This flag asks forkfd() to use vfork semantics wherever available. That
is, suspend the calling process execution until the child either does an
execve(2) or _exit(2). The advantage of that is that it puts lower
pressure on the OS VMM system, as the number of pages that need to be
copy-on-write duplicated is much smaller (still not zero, as at least
the stack in the child will be written to).
However, the only implementation that supports using this flag for now
is Linux's pidfd. It would be possible to add to FreeBSD, but pdfork(2)
does not have a flag for this behavior -- if it gets one, we can add
support for it later. Everywhere else, we need to force the child to not
exit until we store the child process's PID in the ProcessInfo structure
we allocated, which means the parent process must run before we even
return from forkfd().
Change-Id: I1bee3bc466a04f19bd6efffd15f447f28c201aa9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If we detected that the OS supports a version of system forkfd (Linux
pidfd, FreeBSD procdesc), the forkfd_wait() function was using only the
system waiting implementation, which of course can't work for file
descriptors created with FFD_USE_FORK. So just detect EBADF and attempt
again.
If the file descriptor is neither one of our pipes nor a system forkfd,
bad things will happen...
Fixes: QTBUG-82351
Change-Id: I4e559af2a9a1455ab770fffd15f59fb3160b22eb
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
"wait4" because it looks like the wait4() BSD function, which has the
signature:
pid_t wait4(pid_t pid, int *wstatus, int options,
struct rusage *rusage);
And because ours also has 4 parameters.
Having options is important anyway. I might want to add some more later,
but we can't really support them with the fall back implementation (in
fact, we don't honor WNOHANG in the fall back implementation either).
Change-Id: I4e559af2a9a1455ab770fffd15f5858bb357e15b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Oh, and re-remove the spdy protocol handler.
Change-Id: I9ca3517b14ac202eac19ae75d481cfd78d431abb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Currently depending if user uses QApplication
or QGuiApplication we end up in different behavior
when running post routines. For example QApplication
destructor calls post routines before stopping event dispatcher,
In case of QGuiApplication post routines are called
from QCoreApplication destructor, so no more event dispatcher.
This behavior is not consistent and creates troubles
when releasing resources of web engine.
Attached test will hang on windows with QGuiApplication,
however works fine with QApplication.
Task-number: QTBUG-79864
Change-Id: Ice05e66a467feaf3ad6addfbc14973649da8065e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
These functions and macros were never documented.
Let's warn about using them for now, with the option of
removing / renaming them in Qt 6.
Change-Id: Ia595aa35b73e54534e535d2946581651af8023f2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Don't introduce another overload with two parameters. Users
want a simple signal to connect to, not another overload. Deprecate
the currentIndexChanged(QString) overload, usage of that can/should
get replaced by currentTextChanged().
This partially reverts commit 11dc7b35c8.
Change-Id: I5e7d16413f3d62b1a5a7a197f510af2c45cdfa55
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Flushing sublayers via QImage copies of the root IOSurface was causing
performance regressions due to the constant allocations of new images
each frame.
We now re-use the QCALayerBackingStore implementation for sublayers,
which gives a dynamic swap-chain.
We're still paying the CPU cost of the copy from the root backingstore
to the layered backingstores, as well as the memory cost, but at least
improves the situation.
We do not try to be smart and paint directly into the sublayers,
as that would leave the root backingstore stale, potentially causing
glitches when views are repositioned. Investigating this is left
for future work.
Fixes: QTBUG-82986
Change-Id: I758a3d8e1e40e2ed4fe6bc590a4a5a988d87a3a7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit ce2d68ebe1aefeae78ff2fd8ec5ff7e20790ef69)
With very complex regular expressions this makes a significant
difference in performance.
Change-Id: I5267bf71cae98dffb58ec7a1fc982dae639ff312
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
hash.erase(hash.constFind()) is bound to crash if the hash doesn't
contain the item we're looking for.
Change-Id: Icbefca87b0258970373ec55d5dc113e6ab39c5f0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Without this patch JPEG support is always disabled, even though we can
build it from 3rdparty sources.
Change-Id: I9e619f0ca8ec3ca3e7c58981bb6af9b33426a029
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
mappedObject() can do exactly the same thing, there's no need for a
mappedWidget() signal as well
This removes a reverse dependency between Qt Widgets and Qt Core where
QWidget pointers are being used inside Qt Core.
[ChangeLog][QtCore] Removed QSignalMapper::mappedWidget. Connect to
mappedObject instead, and use qobject_cast<QWidget *> to handle Widgets.
Change-Id: I60618a34dd94575e993bd6d8a2cead95cfd71d55
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As a drive-by, enable testing of rcc in the cmake build.
Change-Id: I4150ff3ffe7404bab0cbc72f80b23b47a60cf33d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
qt5_use_modules has been deprecated in 2013 (commit d9ea4bb144)
and removed for the first time in 2018, but then brought back - see
discussion in https://lists.qt-project.org/pipermail/development/2018-June/032837.html .
Anyhow, I think we can finally put it to a rest in Qt 6.
Change-Id: I770f7e93406ad68535d1d90e4a3bacfb920e2d5a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When creating a new QColorSpacePrivate it must be reffed otherwise in
the destructor the deref() will bring the count to -1 which is true
and will not delete the d_ptr.
Change-Id: Id569bae22134b56bf6ad37158d7079b495599fd7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from commit 20eabb72de)
QtQuick3D probes for the supported OpenGL level by testing
multiple OpenGL versions in descending order. Context creation
must fail for versions not supported by WebGL. It does not
appear that Emscripten does this for the 3.x minor versions,
at least.
Add version check which allows OpenGL (ES) 3.0 and 2.0.
Change-Id: Ide8745dd79e69af86812a8d6f5d6cc16ecdd099a
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Add some overloads where (I thought) it makes sense for QDir and QFile
to accept std::filesystem::path objects. Currently my thinking is to
not add overloads for static functions where std::filesystem can already
do the same job, e.g. create directory or file.
Template and enable_if is needed due to both QString and
std::filesystem::path being able to be constructed from string literals.
The common shared code is currently in QFile because QDir had an
implicit include of QFile, made explicit in this patch, and QFileInfo
has an include to QFile as well.
The QT_HAS_STD_FILESYSTEM macro is visible in user-code which I
currently take advantage of in the tests, and users could too.
Change-Id: I8d05d3c34c6c17e20972a6a2053862b8891d6c3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
once CoreText shaper in Harfbuzz has been disabled, we do not need
the hack-ish enablers to support it
Follows-up 21c242f9fd
Change-Id: I40d598b2c9b57ca7953716a56e4e119b2fc06a9b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this code isn't used as of 21c242f9fd
and thus we do not need to keep the patch around
Change-Id: Ic3b836c6a68f40b8e450542a39db968ef3b09101
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The support for handling color spaces by names is deprecated in
recent AppKit versions, and should be replaced by using
NSColor.type, and operations on the type-specific properties of
the color.
Merge the two implementations from qcoregraphics.mm and
qcocoacolordialoghelper.mm, which also fixes the inconsistent
interpretation of color components as device dependent (in
qcoregraphics) or generic (in qcocoacolordialoghelper). We now
always populate the QColor with device independent components.
Change-Id: Id79c609736ff1962bebe4bd7158781a6d1b4475e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This allows to pass and receive possible drop actions from other
processes, including GTK applications.
Fixes: QTBUG-75744
Change-Id: I944edc6fa00f8801a25912e70eb104a647a9fc0e
Reviewed-by: JiDe Zhang <zccrs@live.com>
Reviewed-by: Liang Qi <liang.qi@qt.io>
QFuture<void> and QFutureWatcher<void> are specialized to not contain
any of result fetching methods, but otherwise they share almost the same
implementation with QFuture<T> and QFutureWatcher<T> respectively.
This change unifies their implementations to get rid of unnecessary code
duplication.
Change-Id: I9494ddc58c6db192c66edb988105927da6d61a3b
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
When creating a new QColorSpacePrivate it must be reffed otherwise in
the destructor the deref() will bring the count to -1 which is true
and will not delete the d_ptr.
Change-Id: Id569bae22134b56bf6ad37158d7079b495599fd7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Given:
struct Light { vec4 foo; };
layout(std140, binding = 2) uniform material {
Light light;
int lightCount;
};
the previous code would keep "light" appended for the prefix and look for
`light.lightCount`.
Change-Id: Ia8deacd0cb4833f45151e922fa7b5970169332eb
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
When building qtdeclarative in a non-prefix configuration,
metatypes.json files were created in the source dir. This happened
because the default arg_INSTALL_DIR value is relative in
qt6_generate_meta_types_json_file, and thus a file(TOUCH) with a
relative path creats it in the source dir.
The fix is to check if it's relative during a non-prefix build,
and make it absolute (relative to the install prefix, which is the
qtbase build dir).
Change-Id: Ie9abbd5d93a64e79184d77655d8d8399e894fde5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Don't try to update the scrollarea geometry while resizing a row or
column since this may lead in flickering and artifacts, esp when the
scroll mode is scrollPerItems. Instead do the calculation only when the
resize is finished.
Fixes: QTBUG-72870
Fixes: QTBUG-82595
Change-Id: Id6903c00485b3be6ed54bd5f9bcafdda6da21598
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Remove references to the deprecated QGLWidget and replace it with
QOpenGLWidget.
Change-Id: Ia31df42ab61c25e9ce46f4491267d2c64910f55c
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
QDateTimeEdit very aggressively prevents user input that would result in
values that are outside the dateTimeRange. While keyboardTracking is on
this makes sense, as otherwise the dateTimeChanged signal would be
emitted after each section, with a value that is outside the range.
However, this prevented users from entering a date that is allowed, but
where sections of the date are above or below the respective section in
the maximum or minimum value.
If keyboardTracking is off, QDateTimeEdit only emits the dateTimeChanged
signal at the end of editing, when focus is lost or the return key is
pressed, and then it enforces that the value is within the range anyway.
This change makes the parser ignore the range during editing if
keyboardTracking is off, thus allowing the user to enter a date where
temporary values are outside the range.
The test makes sure that we don't get signals emitted with out-of-range
values, testing both with and without keyboard tracking.
Change-Id: I00fb9f1b328a3477163f890c4618b40878657816
Fixes: QTBUG-65
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The rewrite using CBOR internals replaced one of the two naked pointers
that were members of QJsonArray and QJsonObject with a
QExplicitlySharedDataPointer. The problem is that its operator= will
read the current value to decrement the refcount and possibly delete the
pointed object.
But QJson{Array,Object}::initialize() are called from inlined code,
without initialization. So we can't call operator=. We need to memcpy to
write a nullptr.
This is not unit-testable because it requires compiling against 5.14 or
earlier, then running against 5.15.
Fixes: QTBUG-82700
Change-Id: Iaa63461109844e978376fffd15f98c62656d197c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
the non-const QJsonArray::operator[] requires a valid index and all the
const operator[] say that it returns Undefined if the key or index
doesn't exist. This is the exception.
Task-number: QTBUG-39864
Change-Id: Iaa63461109844e978376fffd15f9716f0cc66cca
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We don't support 1.0 any more, and 1.1.0 has reached EOL.
Bump to 1.1.1 so we can freely use its APIs.
[ChangeLog][QtNetwork][SSL] The minimum required version
of OpenSSL is now 1.1.1.
Change-Id: I5cfb6672fadfa48aedaefbcd6a954aa9eb85bfa5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Constantly re-reading the timezone information only to be told the exact
same thing is wildly expensive, which can hurt in operations that cause
a lot of QTimeZone creation, for example, V4's DateObject - which
creates them a lot (in DaylightSavingTA).
This performance problem was identified when I noticed that a
QDateTime binding updated once per frame was causing >100% CPU usage
(on a desktop!) thanks to a QtQuickControls 1 Calendar (which has a
number of bindings to the date's properties like getMonth() and so
on).
The newly added tst_QTimeZone::systemTimeZone benchmark gets a ~90%
decrease in instruction count:
--- before
+++ after
PASS : tst_QTimeZone::systemTimeZone()
RESULT : tst_QTimeZone::systemTimeZone():
- 0.024 msecs per iteration (total: 51, iterations: 2048)
+ 0.0036 msecs per iteration (total: 59, iterations: 16384)
Also impacted (over in QDateTime) is
tst_QDateTime::setMSecsSinceEpochTz(). The results here are - on the
surface - less impressive (~0.17% drop), however, it isn't even
creating QTimeZone on a hot path to begin with, so a large drop would
have been a surprise.
Added several further benchmarks to cover non-system zones and
traverse transitions.
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Task-number: QTBUG-75585
Change-Id: I044a84fc2d3a2dc965f63cd3a3299fc509750bf7
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
qsql_odbc.cpp(1589): warning C4267: 'argument': conversion from 'size_t'
to 'int', possible loss of data
Change-Id: Ib36fda3e3b21bdbc8b343ae5136542dfcf3c1065
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Very similar to source-over, but have traditionally been inlined.
Change-Id: I211f0b1c91c1a00c4769fbbfe2e3d0c7b22d7048
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
...between setGraphicsPipeline() calls with different
QRhiGraphicsPipeline instances within the same pass.
Also adds similar logic for the GL_ARRAY_BUFFER (vertex buffers)
as that is a hotspot as well.
This is not intended to be a 100% avoiding any redundant call solution,
but rather to take care of the most common hotspots, so that bad OpenGL
implementations with a larger API call overhead will not cause us to
regress compared to the direct OpenGL rendering path in Quick and
Quick3D.
What we have here reduces the number of GL calls in the view3d example
by ~200 within one frame, which is a pretty good start.
Task-number: QTBUG-78603
Change-Id: I6aeab9c1c43b148ea6ef05d0284990a996c7ba28
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Keypad navigation within a group should work for auto-exclusive buttons,
or for checkable buttons that are in a button group. Since the code
already tests whether the button should be treated like an exclusive
(which implies checkable) button, use the result of that test when
finding the candidate button to move focus to, and not only when
actually changing the checked button and the focus.
Change-Id: I4dc41a90d51a8304483046252ceff0ebfe2a2e52
Fixes: QTBUG-27151
Done-with: david.faure@kdab.com
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It was introduced in Qt 4.4 (e150f6a6e619) to work around slow resizes
on Windows and X11 due to excessive painting, but has since been removed
when old dead code never ported to QPA was removed in a2337f79ff.
Change-Id: Ic14e714a02edb4194a445a6bb0759b601799fdc6
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
We don't need to handle solid SourceOver logic directly, this was
already handled by getOperator and changed composition to Source.
Also removes some dead code and changes an assert in unreachable
code to Q_UNREACHABLE.
Change-Id: I66a6c1248bd34e31096023f1acb20385099932c9
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
No sanitizer is needed, just looking at the code is enough.
It was wrong.
Change-Id: I9df417c137d6b3361c3161865e099a8be40860de
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
qstring.cpp(10210): warning C4267: 'argument': conversion from 'size_t'
to 'uint', possible loss of data
qcontiguouscache.h(141): warning C4003: not enough arguments for
function-like macro invocation 'max'
Change-Id: I01f1fc1c85341ea61c86dcffb1b01fe4cde50eea
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The class remains \internal though, as it has a very narrow use-case for
low-level code inside Qt.
Change-Id: I9d2b6486ce29b290af7f930a0bfc78590a83cc01
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This replaces the private tagged pointer and the use of enums for the
tag makes the observer handling code more readable. The
pointer-to-tagged-pointer class remains in qpropertyprivate.h due to its
exoticness.
Change-Id: Icc88799136c6839426d994b42368526463265e66
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When a binding is backed by old-style property captures, then having
this API is needed for Qml.
Change-Id: Icf51efe057eaf845969ed2cda52d082dedde677e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A generic binding allows implementing the binding function in a way that
enables the QML engine to run binding scripts and convert the V4::Value
into a QVariant and then assign the value to the property with the help
of QMetaType::construct.
Change-Id: Id4807be92eee7e3501908e6c5e4c861cfcb7772a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The paths in the build properties require forward slashes
apparently. On Windows, we would default to native backslashes
and they would be stripped from the path. Converting to forward
slashes fixes the problem.
Issue was introduced by dd04fb639b,
since before that, the NDK path was retrieved from the environment.
Fixes: QTBUG-82944
Change-Id: I6c51113efcf671461a5871991b3225a52b95266c
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Move the default arguments to the overload that is not deprecated. This
is fully source and binary compatible.
Change-Id: I0d2eb491faf8c2164b80c33c4c4f749173b690f5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch adds the equivalent of testlib's selfcover.pri and is enabled
for both testlib and the respective selftests test.
This patch also fixes the selftests so that they can run without
FEATURE_testlib_selfcover enabled.
Change-Id: I15913de2d572ac79804ce3e652cee66de74318f8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
At the moment this makes the type as well as the setter/getter available
through the meta-call as well as the ability to register observers and
bindings. Only QProperty members that are annotated with
Q_PROPERTY(type name) are made public through the meta-object.
Change-Id: I16b98fd318122c722b85ce61e39975284e0c2404
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
If we want to filter away a column without changing the filtering
for the rows calling invalidateFilter() is wasteful because it will
call filterAcceptsRow() for all rows even though that is not needed.
This commit add two functions, invalidateRowsFilter() and
invalidateColumnsFilter() that work the same way as invalidateFilter()
except that they will invoke respectively only filterAcceptsRow() and
filterAcceptsColumn().
Change-Id: Ib4351cf08c229bd97bbbfee6da92397dca579a84
Reviewed-by: David Faure <david.faure@kdab.com>
QSet and std::(unordered_)set were so far not treated as appendable, as
they lack a push_back method. We do however need support for this in
declarative to enable converting back from QJSValue arrays to sets.
We achieve this by testing for and using the insert method. While vector
has also such a method, it doesn't take a single value, but rather a
position or iterator + value, so the template specialization is not
ambiguous.
Task-number: QTBUG-82743
Change-Id: I74fc7b1b856d9bcd38100b274ba2b69578ea8bbb
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Harfbuzz supports this in a cross platform way, so there's no
reason not to accept a font with AAT tables on other platforms.
Change-Id: I00c38a11dfd4a32e846254c1da9e8841090f5fd9
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
On macOS, we have been using a different code path internally in
Harfbuzz-NG for shaping, since most fonts on the platform are based
on AAT rather than OpenType, and this was not supported by the
OT shaper in Harfbuzz before HB 2.0.0.
However, AAT support has been added to the main shaper code now,
and is in a shape where it is used in both Chrome and Firefox,
Since we have upgraded the Harfbuzz in Qt as well as updated the
minimum required version for system-harfbuzz, we can also use this
code path and avoid another source of platform-specific issues.
Change-Id: I5cf4626d986998a0a4614c751183bcac6f4e588d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A common pattern in declarative is to use the unused bits in linked list
next pointers for additional information storage. The "next" pointer is
typically then a tagged pointer of the containing class, which is not
fully defined yet. Therefore alignof() can't be used at tagged pointer
instantiation time. This patch delays the calls to alignment, etc. until
the corresponding functions are used, as in principle the tagged pointer
is just a quintptr and no additional information should be needed until
operating on it.
Change-Id: I87a3578ee921d471e1b60ed5903b549ef0610b97
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
It's not possible anymore, since many years. The desktop's don't use the
X11 root window anymore :)
Fixes: QTBUG-82880
Change-Id: I923f29f23e61d93640cacb2ac20620c5ddc480b9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also documents the ownership of the traditional tryStart better, and
remove a redundant check.
Change-Id: I06202465b782926724fa33a901d08c1626f87373
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
- Fix wrong forward declaration
- De-inline constructor of QUntypedPropertyBinding(), fixing:
qtbase\include/src/corelib/tools/qshareddata.h(184): error C2027: use of undefined type 'QPropertyBindingPrivate'
qtbase\include/src/corelib/kernel/qpropertyprivate.h(60): note: see declaration of 'QPropertyBindingPrivate'
qtbase\include/src/corelib/tools/qshareddata.h(184): note: while compiling class template member function 'QExplicitlySharedDataPointer<QPropertyBindingPrivate>::~QExplicitlySharedDataPointer(void)'
qtbase\src\corelib\kernel\qproperty.h(143): note: see reference to function template instantiation 'QExplicitlySharedDataPointer<QPropertyBindingPrivate>::~QExplicitlySharedDataPointer(void)' being compiled
qtbase\src\corelib\kernel\qproperty.h(142): note: see reference to class template instantiation 'QExplicitlySharedDataPointer<QPropertyBindingPrivate>' being compiled
qtbase\include\/src/corelib/tools/qshareddata.h(184): warning C4150: deletion of pointer to incomplete type 'QPropertyBindingPrivate'; no destructor called
qtbase\include\/src/corelib/kernel/qpropertyprivate.h(60): note: see declaration of 'QPropertyBindingPrivate'
Amends 9f9049b486.
Change-Id: Idd613e2487d5ab7f8ead74747acd976d5d210c28
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
gnuwin32 repository was removed from Qt 6 in f96355679.
If we don't do this, it could look for the wrong version of flex.
Done-with: Andy Shaw <andy.shaw@qt.io>
Change-Id: I15cd68ceb17c33dfc6316a469bca706100bfce60
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Useful for attaching small bits of information in the alignment bits of
a naked pointer. For use in the new property system as well as in
qtdeclarative (where currently a similar class exists as private API).
Change-Id: Idf9b93e714e15129f302e16425dbeda94bcd207b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Amends e464e1eb8e. qNextPowerOfTwo has the
same issue as qCountTrailingZeroBits.
Change-Id: Ib1905986e932ac130bce7a1d98f4f7b5ef73991f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This -no-feature has probably not been tested for a while
and seems to have rotted a bit, both some unprotected
uses and some warnings on unused parameters.
Change-Id: Ie20a06c78d3b4c36860dab49d6615eaa8ffc9077
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
As QRegExp will be moved to a compat library in Qt 6.
Change-Id: I181aec45bd798f49d2c50a0e7fb64782e004b854
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Change-Id: I95009b5bc6f9ce4356e707e07c5cb7346aaf9245
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Due to the changes in 5.14.1 this code now actually seems to be hit here,
throwing NoSuchMethodError exceptions all over the place and breaking
date/time handling quite spectacularly.
Change-Id: I9bee3de39ec98f86d7944b94e89119505f62dc6c
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
This ammends change baed8534bc, which
might have introduced a hard to reproduce segmentation fault when the
screen number is out of bounds, or when the QScreen object doesn't
return a valid pointer for QScreen::handle.
As the issue doesn't reliably reproduce, this is a speculative fix that
adds bounds and nullptr checking.
Change-Id: I0cec0a344e80159ee1723d840f207267a608cef4
Fixes: QTBUG-82807
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
That will give better text rendering capabilities in Qt and allow
us to clean up some more code.
Change-Id: Ia11b7ab57cda8320047381224989766b854e8ca5
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
It's not used anymore. harfbuzz-ng is a requirement in Qt 6 if you
want any open type shaping.
Fixes: QTBUG-82881
Change-Id: If7100aebdcfa078a999608bb8f07a2ef3a79d282
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
We're either using harfbuzz-ng or disable shaping now.
Change-Id: Ia80bc4671efb20eabb35d7560abc774cdad7f424
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Copy the relevant harfbuzz code over from Harfbuzz into qunicodetools.cpp
This is basically the attribute functions from the different harfbuzz
shapers. Those methods do not require any font support but operate
purely on unicode input data.
Adjusted the code to use Qt's own data structures and enums (QChar::Script
and friends) instead of the harfbuzz equivalents.
The code is 100% copyright The Qt Company, so we can do this without
requiring any attribution.
Change-Id: I8262ba34eae1837f031f07d1b6d9917c0224e160
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This avoids one additional copy of data that we've been doing before.
Change-Id: I3fae0ebe0cded632b41fdcf7efc01d5c7f2dc181
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This implements the core value based property binding system with
automatic dependency tracking. More features are to be added later, and
the documentation will need further improvements as well.
Change-Id: I77ec9163ba4dace6c4451f5933962ebe1b3b4b14
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
drawTree() does
QPoint hoverPos = d->viewport->mapFromGlobal(QCursor::pos());
d->hoverBranch = d->itemDecorationAt(hoverPos);
and itemDecorationAt does
const QModelIndex index = q->indexAt(pos);
which might very well be an invalid index.
Change-Id: I7db98871543bd7e1c57fcc475d2646757bf2bb42
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
DBus does have dbus-1.13.* releases these days, as well as its stable
1.12.* releases, but there's no change in the fragments we've
extracted from its headers, since the last (1.12.12) release we
checked against. We're thus in sync with 1.12.16 and 1.13.12.
Fixes: QTBUG-82748
Change-Id: Ic550e3cd7486db712643711d010f5b45c347a95b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
qt_builtin_ctz is unfortunately not constexpr on MSVC, so the whole
function cannot be used in constexpr contexts, unless v is exactly 0. As we
don't have std::is_costant_evaluated until C++20, we need to introduce a new
helper function, which always works in constexpr contexts.
Change-Id: I36290acb61e430d6bdb3da112a9b2263be4b9fbf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Wasm does not use minimal, offscreen or qvnc platform plugins.
Change-Id: I3a1919a260280ffdff33b68502d488f71f2b0c13
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
qDecodeMYSQLType() did not handle FIELD_TYPE_GEOMETRY and therefore the
type for a POINT column was incorrectly treated as QVariant::String.
Even the type can not (yet) be properly decoded to a QPoint, treating it
as QVariant::ByteArray is the better option here.
Fixes: QTBUG-72140
Change-Id: I12e75b326ae3acb75cb36f2e650464528bd43c0e
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The data structure relies on stable nodes in QHash, something that
is not guaranteed in Qt 6 anymore.
Change-Id: I9077ed404ee922893099f5eaae76d2dcea414090
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The command is deprecated and has no effect apart from generating
a documentation warning.
Change-Id: I30871bfd6975f8268930cce99993a8579242fdb8
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The app or its dependencies may link against X11's libGL.1.dylib from
XQuarz, to support GLX on macOS. Doing so may place libGL earlier in
the load order than Apple's OpenGL framework, which results in dlsym
picking symbols from libGL when using the RTLD_DEFAULT lookup strategy,
breaking Qt's OpenGL support in various ways:
QOpenGLShaderProgram: could not create shader program
Warning: "" failed to compile!
To fix this we use RTLD_NEXT, which looks up the symbol in
dependency order of the image that called dlsym, rather than
the global load order.
Change-Id: I1ec3055a4ab0bb96566c7e196d301b30785f2dc0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This patch adds native iOS file open and directory picking support for
the QFileDialog using the iOS UIDocumentPickerViewController class.
Change-Id: Ia724a59742650a01c62067aed3477f82ab1fd546
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The code had not been touched in a very long time and was overgrown
with weeds from pre-QPA times.
We no longer maintain an indirection through QSystemTrayIconSys,
which was a remnant from Qt 4 times.
The Objective-C helper class used for callbacks has been slimmed
down to just a simple delegate, with the actual work done in the
QCocoaSystemTrayIcon implementation, further reducing indirection.
We no longer use a custom NSView for the status bar item, something
that has been deprecated for a long time. Instead we set properties
on the NSStatusItem's button. This gives us automatic support for
drawing the icon with the right highlight, including in dark mode.
Finally, the code has been updated to modern Objective-C syntax.
Change-Id: I59706081f6b179035b8216a7a6ebc08a47cec127
Fixes: QTBUG-77189
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
UWP expects these functions to be opened via the XAML thread, so we
ensure this is done by running those functions on that thread.
Change-Id: I57ae3a7d9b45d0b1a00ac23b103386bd34b65c6d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Include WordBreakTest.html, since a test uses sample strings from it,
albeit without actually reading the file.
Had to comment out more of the new tests, as at Revision 24, pending
an update to harfbuzz and the text boundary detection code.
Task-number: QTBUG-79631
Task-number: QTBUG-79418
Task-number: QTBUG-82747
Change-Id: I0082294b09d67ffdc6a9b5c15acf77ad3b86f65f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This allows QMap to hold more than 2^31 entries on 64 bit systeems.
Change-Id: Ia6abd3441f9bc0c7e1a01b78726b5c32209542fa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Allow for more than 2^31 items and large offsets.
Change-Id: I42f7bf20ce0e4af43dbb2e2083abf0e232e68282
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Provide move semantics for QContiguousCache. Do further cleanup of the
code and avoid special casing for complex typeinfo where it won't
make a difference anyway.
Change-Id: I9bd261aec21be7a050e04f5b3a1f0b8e1d94c064
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove the union being used to hold the d-pointer, as accessing both
members of the union on the same data is technically undefined behavior.
Change-Id: Ia5a063d97538222575a47e9462c0675acdf32aef
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWindowsWindow::updateFullFrameMargins() which is called
from the screen changed handling does not take native menus
into account.
Since the size of the menu is not known when using
EnableNonClientDpiScaling(), obtaining the correct frame
size requires triggering a WM_NCCALCSIZE message. Extract
the helper forceNcCalcSize() from QWindowsMenu and
use that from updateFullFrameMargins() in case menus are present.
Amends d2fd9b1b98.
Fixes: QTBUG-82580
Change-Id: I306f1faf84e26c88608cb22ffd42eccc848905c3
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Return the value from handleWindowSystemEvent so platform plugins can
detect whether it was accepted or not.
Change-Id: I53ffb713afc8e0ec1789107c912433133cfaa11a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The functions take QStringView now. The ones taking QString can
be implemented inline (BC break). Drive-by change, use
qToStringViewIgnoringNull.
Change-Id: Ia3089c574446418e5ab93e08e21869ef19fbfbfd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QRandomGenerator is now used to seed QHash, so the comment
is wrong.
Change-Id: Ic50fe95ea4169b55290cc758f5aebfbb0a3ea085
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The effect of this is that QIcon::pixmap() will/may
return a pixmap larger than the requested size (with
an appropriate devicePixelRatio set), suitable for
high-dpi displays.
Many use cases, such as painting the image with QPainter,
will be unaffected by this change. User code which e.g.
iterate over image pixels may have to be updated.
Change-Id: I63e867cc1e3f2a0b5cad92e1ffab4fe4de33ae19
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
On a high-dpi screen and AA_UseHighDpiPixmaps set, QIcon will ask its
engine for a scaled-up pixmap. When the icon has been created from a
theme, the engine is a QIconLoaderEngine. For a SVG icon, that engine
would recursively use QIcon to load the scaled-up pixmap, leading to
double scale-up. Fix by bypassing the QIcon API in the SVG case,
loading the SVG icon directly from the SVG icon engine.
Done-with: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Fixes: QTBUG-73587
Fixes: QTBUG-75039
Change-Id: I7fba02b6454decb5fcbca9c5a092e75954261dfd
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Make the copy explicit.
qhighdpiscaling_p.h:282:24: warning: loop variable 'rect' has type
'const QRectF &' but is initialized with type 'const QRect' resulting
in a copy [-Wrange-loop-analysis]
for (const QRectF &rect : pixelRegion) {
^
Change-Id: I4080ff42c41e464d081ab2b01cb2d010867b041b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When shaping is disabled we also skipped the step which set
dontPrint to true for soft hyphens, line separators, and
similar characters. This caused boxes to appear in text with
e.g. line separators.
There is a minor modification to the code that is moved:
In the case on unshaped text and only the CMAP able is used,
the font engine for the soft hyphen can be a fallback engine,
so we need to also set the correct engine index when changing
the glyph index.
[ChangeLog][QtGui][Text] Fixed an issue with QFont::PreferNoShaping
where boxes would appear in place of unprintable characters.
Fixes: QTBUG-81994
Change-Id: Ifc9f4f89d928475ca0487a92b4480bd5db5918fd
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The link is actually a self-reference; setCurrentSection() is setter
for the currentSection property, and has no dedicated documentation.
Change-Id: I4977650566913c590d46aede92d8678b7b7ea291
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
QVLA *does* have iterators and *can* be used with foreach
(... I didn't say it should). Move its description together
with the other containers.
Change-Id: Ib60d1f7b3dc0e8c7004991bd4fdff95b3f23af60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no need to scale the cursor down to 1x, since we're now passing
the correct device pixel ratio on to the NSImage by setting its size.
Letting macOS deal with the scaling produces a higher resolution cursor.
Change-Id: Icdb3d59998f9a32094c2973c3b222cf22b6398ac
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The QIcon can be turned into a NSImage directly, with all the supported
representations that the icon contains. This allows macOS to choose the
best representation for whatever context it's rendering the NSImage in,
and will likely do a better job of scaling it if none of the sizes fit
target context.
This fixes e.g. application window icons not taking retina screens into
account.
Change-Id: Idbd97cae4ef50cc0dd3f38c355cfceec007e0d19
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The conversion uses NSBitmapImageRep and correctly sets the display
pixel ratio and size of the resulting image, reducing the need for
clients to deal with this.
It also propagates the isMask property of the icon to the NSImage.
The function returns an auto-released object, as is customary for
class-functions like these.
Change-Id: If97f3d383959cd0f58a0d1249f5c26e52c1da9cd
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The conversion uses NSBitmapImageRep and correctly sets the display
pixel ratio and size of the resulting image, reducing the need for
clients to deal with this.
The function returns an auto-released object, as is customary for
class-functions like these.
Change-Id: I5124d1d8145a7f5266921b22fda1987798771ec1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Matches the LIBS_SUFFIX define we use in Android conditions
and replaces it with a sane amount of escaped characters.
Change-Id: I7d870f992c70b105dd80b6fa94f87d3fa5644006
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It is needed when cross-building Qt using CMake, where the zstd
feature might have different values between the host and target,
in which case the build system tells rcc not to use zstd when
the feature is disabled.
Amends d20c980576
Change-Id: I9dc55b59b1be5272b79aa5f1e2daf2b516a157d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There're some uses we can't get rid of until the deprecated functions
are deleted, so suppress them for now.
Change-Id: I85b737eefc71f8f3ac939dfa961383220a8244af
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We can't get rid of internal use, so let's work around that by not
marking it deprecated in private code.
Change-Id: If6cbfff4f16c30892335633567326141fbc44092
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's needed by QStringTokenizer, and it's more generally useful as a
public type (you don't need to match the type of the conversion
operator, but can just access the nested typedef).
Change-Id: I2cf8b22f1ca31c38d51d2143932115da6aefc5a7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Just mark the constructor constexpr. If std::basic_string isn't, then this
will be silently dropped. If std::basic_string is, we can now construct
QStringView from std::basic_strings at compile-time.
[ChangeLog][QtCore][QStringView] Conversion from std::basic_string can now
be constexpr (when std::basic_string is).
Change-Id: Ia608f1a71c9a24f417b3e21e150ff6bd3d2f4fc4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use QFileDialog::ExistingFile and check whether file can be opened,
fixing warnings like:
QIODevice::read (QFile, "/home/.../blub"): device not open
Change-Id: I7ee1d59f01383c581bc09fb44855835aae8c246b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The changed buffer usage priority that was introduced in our ANGLE
update caused severe performance regressions for Qt applications.
Fixes: QTBUG-73835
Change-Id: I49839bb272cdeec0027264f2751b88bc149665ad
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Files ending with .mm are Objective-C++ files, so we don't need
a separate file for the C++ parts.
Change-Id: I3ef52bc98291fd461b889978a538e81630d17c6e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Change depreciated and removed preferLowPowerToHighPerformance to the new
powerPreference
Fixes: QTBUG-82730
Change-Id: I53e4e39626fce75897701b0134adadf00dac2dea
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
If XLIB_SKIP_ARGB_VISUALS is set, we might fail to find visuals for
supported configurations.
Task-number: QTBUG-81904
Change-Id: Ib0d26faabe430925881b7f2acfc5361df3af416b
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The conversion takes place in separate blocks, but may need to be
compressed after converting.
Fixes: QTBUG-82818
Change-Id: I71431af3d41e1bfe1f9b3d8cd7c1e0a2020846cd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
[ChangeLog][Potentially Source-Incompatible Changes] QtConcurrent::run
has the following signatures: run(Function &&f, Args &&...args) and
run(QThreadPool *pool, Function &&f, Args &&...args). If f is a member
pointer, the first argument of args should be an object for which that
member is defined (or a reference, or a pointer to it). See the
documentation for more details.
Fixes: QTBUG-82383
Change-Id: I18f7fcfb2adbdd9f75b29c346bd3516304e32d31
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This is similar to how the similar table in qblendfunctions.cpp is now
set, and is easier to read and maintain.
Change-Id: I43a885fae7b1a92110bb33f0b22a5b02fddc0115
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The effect of the soft-hyphen needs to be updated once the final the
break point has been found.
This change cleans the logic by using two variables keeping track of
soft-hyphen at current evaluated position and at last confirmed break
point. Also adds tests for supression of soft-hyphens in the tight
WrapAnywhere case.
Fixes: QTBUG-35940
Fixes: QTBUG-44257
Change-Id: I7a89a8ef991b87691879bb7ce40cec4a3605fdd5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This class has documented member functions, but only the related
\headerfile was documented. The class documentation itself was
omitted with the \dontdocument command.
Replace the \headerfile with a \class command, and move the global
functions to be related to the class itself. Keep the title as a
\keyword to avoid breaking any external links. The new class page
will inherit the .html file name of the header page, so we're safe
in that regard as well.
Fixes: QTBUG-82800
Change-Id: Id51539b45e0642d91b304a37f95461ca3d6c9841
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Due to Android's multi-abi the build will fail due to concurrent
access:
cmd /c C:\Projects\Qt\repo\qtbase\src\corelib\mimetypes\mime\generate.bat C:\Projects\Qt\repo\qtbase\src\corelib\mimetypes\mime\packages\freedesktop.org.xml > .rcc\qmimeprovider_database.cpp
The process cannot access the file because it is being used by another process.
Change-Id: I647e0a6d8aa03cf116b08a1dce6e61e8882661f4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Amends 33cd680ddb, which removed the
Qt5CompatiblityHook class. However, the template line above it was not
removed, and now applied to isBuiltinType. As that function should not
be a template, we remove it now.
Change-Id: If8e276daebce5480b59d9c21b049818f9a46ec98
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
src\corelib\kernel\qmetaobjectbuilder.cpp(1489): warning C4267: '+=':
conversion from 'size_t' to 'int', possible loss of data
Change-Id: I9cf9bdcb62b796eb8d3f3c633640b648cb11b39f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The area reserved for font properties was too small for
the properties we needed, and as a result font properties
were added outside of the area and special-cased (in the case
of FontLetterSpacingType) or ignored (in the case of
FontStretch) by conditions that check if the property is
within the designated area.
We reorganize the enum values now that we can, and allocate
some more space for the font properties area.
Fixes: QTBUG-65345
Change-Id: I8121ff7f72102d8022c6a6d2f8ed9c35dcdbb321
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Show a warning but allow applications to survive by not attempting
to call VS/PS/CSSetWhatever() with an invalid number of resources.
Relevant for samplers in particular, where the limit is 16. Qt Quick 3D
exhibits problems with this when using custom materials combined with
shadow mapping, and while this is not a solution to the problem there,
at least the problem is now clearly indicated instead of crashing.
Task-number: QTBUG-82719
Change-Id: I83914b7648001fa421ed1cf07a7b7444e0ef8fc0
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Following the incomplete data guesstimation optimization the
tst_QSslSocket::readBufferMaxSize test would fail due to it waiting for
16K, but the readBufferMaxSize was 10 bytes.
Amends 559b563d71
Change-Id: I5d17fac24e73c1305161aff744710b4c5b0b457a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
For QNAM:
Deprecate the to-be-unused enum and mark the property deprecated in docs
For bearermanagement:
Add a warning on the bearermanagement documentation page that it is
deprecated.
Change-Id: I2cbe12ddec444d9f704601f07f3a7c9b70dc4f3c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Use QThreadPool to process QImage smooth-scaling, format conversions,
and colorspace transforms multithreaded.
Change-Id: Ic142b1fa899f56e7e5099d36ca713701a47b681b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Even if there are no printers installed, we can still show the print
dialog, which gives the user feedback about no printers being installed,
allows them to install one, or allows them to print to PDF as a
fallback.
The code for printing to PDF has been re-enabled, and the conditions
of QTBUG-38820 have been removed as the problem is no longer present.
The code also takes into account the possibility that the user chose
to print to PostScript, which we don't yet support, but warn about.
We now also support opening the printed document in Preview. This
requires a minor assumption about the print operation being done
synchronously after the print dialog is accepted, but this is
something we can improve in the future with internal APIs if it
turns out to be a problem.
Printing workflows such as sending the printed document via mail
or messenger are not not supported, and will give a warning.
Fixes: QTBUG-36112
Change-Id: I8ba9e2c5ce31a5a06542c4a7126d005e4b27f2be
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Add documentation on how to use a module from CMake, alongside
the existing documentation about qmake.
While at it, also remove the mentioning of the central include;
It is not something we should actively advocate anymore. Instead,
the documentation of every class gives the correct include to use.
Task-number: QTBUG-73058
Change-Id: I71ed5a62f4f0a6d868dd1f84ea39e5ac385a2fb8
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
To bring it in line with the other platforms, then it needs to check if
the initially selected files are set and use the first one. Otherwise it
can fall back to the initial directory if that happens to include a
filename.
Change-Id: If34ae0e7e10b6a3c25e9422d9b4f2c21e6bfc8d1
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Change OpenGL and OpenGL ES2 library tests to just include the header
file in the test header code. This mimics what the OpenGL ES3 library
tests does.
Change-Id: Ic63879ea100bc66cf58ffd660e89c5803c6e29e6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QSFPM::reset() is deprecated and begin/endResetModel() should be used.
Therefore adjust the documentation to reflect this.
Fixes: QTBUG-82470
Change-Id: I786b3f25e5674d97d0ef6a0c91342973d5e952e9
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The ODBC driver did not properly decode table names with unicode chars.
Fix it by explicitly passing the unicode flag to qGetStringData().
Fixes: QTBUG-82401
Change-Id: Id6eb44cc85ce196ea97d0d6aef1cd573fa033970
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The std::is_pod trait is deprecated in C++20; is_trivial
and is_standard_layout exist since C++11.
Change-Id: I4b901d8edf1a55001764445aee9c338d3dc23b21
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is deemed more appropriate than having some time consuming tracking
of descriptor types in pools, just to avoid the rare case of attempting
a failing vkAllocateDescriptorSets(), which is then always followed by
another, successful attempt.
Change-Id: I7a3a1d80afe400dc96605a3d6c834e8b2c71143a
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
macOS 10.12 introduced automatic window tabbing, where the OS provides
tab handling on behalf of the application. The feature defaulted to
being on, and the release notes asked applications that had their own
tab handling to disable the automatic tab handling explicitly.
Qt has its own tab handling, and should therefore disable the automatic
handling. We do this on a per NSWindow basis, using the tabbingMode
property of the window, instead of the global allowsAutomaticWindowTabbing
property on NSWindow, so that individual windows can still opt in to
the automatic tab handling. Doing it via the tabbingMode property
also ensures that we're not affecting the host application's
behavior in a plug-in setting.
Ideally Qt's tab handling should read the userTabbingPreference
property of NSWindow to pick up the system preference choice of
whether to open new windows as standalone windows or tabs, but
this is left for a later change. An alternative would also be to
use the automatic window tabbing instead of our own implementation.
Fixes: QTBUG-61707
Change-Id: Icf2078b63ec16202ff7fd83ea264a48dc61978e1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Without this include, it fails to compile the following line on some
systems: "std::vector<bool> done(s)", because only a forward declaration
is available.
Change-Id: I6eac4b7f69dda16e181043eb707f970b21b2dfef
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Amends 2f366a63b2.
Task-number: QTBUG-82682
Task-number: QTBUG-81342
Change-Id: I30f465bf432e27828db460f6dbbb59eee0cca8f2
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Now that we can generate the library config tests which verify the
OpenSSL version, we no longer need these special cases.
Change-Id: I8ddccf4ae1c698db9fac391976b3b4b670712582
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The commits e1e08629 and 66e905b1 introduced undefined behavior. Fix
this by assigning the result of takeFirst to a temporary.
Change-Id: I9e29412cf632d4836b95d47e12d8c07ab0645fbb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
No point in linking to itself.
Change-Id: Id0bf3fa6878417e541ec0997d34758b0c59e99b3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The family name of a font is ambiguous and without additional
information there is no way to separate one font from another
inside that family.
In order to make it possible to expose more info about application
fonts from FontLoader in Qt Quick, we need to store them in the font
database.
Task-number: QTBUG-68829
Change-Id: I931e1c2c004437ac0a21d4d88e55d176de676f34
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Takes care of the first round of todos and deprecations for Qt6 in
qevent.
Not touching anything that might interfere with changing the class
hierarchy as the file also suggest.
Change-Id: If72d63d8932f1af588785bf77b34532358639a63
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Introduces a new QRhiShaderResourceBinding function that takes an array
of texture-sampler pairs. The existing function is also available and is
equivalent to calling the array-based version with array size 1.
It is important to note that for Metal one needs MSL 2.0 for array of
textures, so qsb needs --msl 20 instead of --msl 12 for such shaders.
Comes with an autotest, and also updates all .qsb files for said test
with the latest shadertools.
Task-number: QTBUG-82624
Change-Id: Ibc1973aae826836f16d842c41d6c8403fd7ff876
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
When using CMake 3.17 with any of the Ninja generators we can leverage
a dependency on the timestamp file produced by CMake's automoc to avoid
having a custom target run on every build.
Change-Id: Ia70d2730cc8296d0a43642655fe69b555cb393c0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This removes the last add_custom_target when used in conjunction with
the Ninja and CMake >= 3.17.
Change-Id: Ibb9bdff4b5bc00542d2a5ba631cea7e0510ad5e9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It has been marked obsolete for a very long time, and deprecated
in code since f9e6f8efda.
Change-Id: Ib351025369584bf3b8a3a17f980a567d2b9556ca
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Previously the FindWrap modules checked for hardcoded features
when deciding whether to use a bundled library or not. This proved
not to work correctly because features were not available when
the find modules were processed.
Introduce a new CMake API call that needs to be manually called
after an add_subdirectory call which declares a bundled library.
The call will check for the existence of the bundled target, and will
then set a cache variable QT_USE_BUNDLED_Bundled<TargetName>.
The same variable is written into a FindWrapFooConfigExtra.cmake file
which will be loaded by the appropriate FindWrap module. The module
can that use that variable to decided whether to link against the
bundled library or the system library.
Change-Id: I75e9a4f4e14d88d4490916a79ad12f1ce57891e0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Do not use the deprecated method QProcess::start(QString) anymore.
Change-Id: I09eae2c8a1dbb53fd2de004e5030da9bb3c07b14
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Implement this method in terms of splitCommand and
QProcess::execute(QString, QStringList).
Change-Id: I1fe78fb53d8b6b34a8796f9fbda380a98a840c99
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... it breaks move semantics.
We can change these, since they're templates and a short survey shows
that no-one in Qt was crazy enough to inherit an exported class from
QHash or QMap.
Otherwise this would be BiC on MSVC, which encodes the return type.
There's also no safety benefit here, as none of the overloads returns
by reference, so users cannot expect map.value(key).mutate() to have
an effect on the element in the container.
In this, key() and value() differ from op[], which also returns const,
but whose overload returns a reference. op[] is therefore not proposed
here.
[ChangeLog][QtCore][QHash/QMultiHash/QMap/QMultiMap] The value() and
key() member functions now return T (was: const T), enabling move
semantics on their return values.
Change-Id: I0e5f53f9834caad458e3bde27f1daacbb4bac71b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Added QFuture::then() methods to allow chaining multiple asynchronous
computations.
Continuations can use the following execution policies:
* QtFuture::Launch::Sync - the continuation will be launched in the same
thread in which the parent has been executing.
* QtFuture::Launch::Async - the continuation will be launched in a new
thread.
* QtFuture::Launch::Inherit - the continuation will inherit the launch
policy of the parent, or its thread pool (if it was using a custom one).
* Additionally then() also accepts a custom QThreadPool* instance.
Note, that if the parent future gets canceled, its continuation(s) will
be also canceled.
If the parent throws an exception, it will be propagated to the
continuation's future, unless it is caught inside the continuation
(if it has a QFuture arg).
Some example usages:
QFuture<int> future = ...;
future.then([](int res1){ ... }).then([](int res2){ ... })...
QFuture<int> future = ...;
future.then([](QFuture<int> fut1){ /* do something with fut1 */ })...
In the examples above all continuations will run in the same thread as
future.
QFuture<int> future = ...;
future.then(QtFuture::Launch::Async, [](int res1){ ... })
.then([](int res2){ ... })..
In this example the continuations will run in a new thread (but on the
same one).
QThreadPool pool;
QFuture<int> future = ...;
future.then(&pool, [](int res1){ ... })
.then([](int res2){ ... })..
In this example the continuations will run in the given thread pool.
[ChangeLog][QtCore] Added support for attaching continuations to QFuture.
Task-number: QTBUG-81587
Change-Id: I5b2e176694f7ae8ce00404aca725e9a170818955
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- QLoggingRule::parse() and the ctor take pattern as QStringView
- parseNextLine takes lines as QStringView and produces the pattern as
QStringView for QLoggingRule
- (setContent has to wait for QStringTokenizer)
- QLoggingRule::pass()'s first argument is always QLatin1String, so
take it as one
Use chopped() more, add a std::move().
Change-Id: Ic95ea77464a9922fef452846bc6d5053bd5de56e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In QByteArray, they were just not marked as such.
In QString and QStringRef, the implicit conversion from QChar to
QString would destroy it. Add a QChar overload, delegating to
QStringView.
Added docs for the new overloads, copying from the nearest neighbor so
as to not look out of place. All string classes use different wording
for these functions. A cleanup of this state of affairs is out of the
scope of this patch.
Change-Id: I0b7b1d037aa229bcaf29b793841a18caf977d66b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It takes any type which is implictly covertible to the result type
and then converts it in the outer-layers. Then it passes it into the
deeper layers and initiales the result value.
One drive-by fix with a missing letter in the documentation.
[ChangeLog][QtConcurrent] QtConcurrent::mappedReduce and
QtConcurrent::filteredReduced, as well as their blocking variants,
now optionally take an initial value.
Fixes: QTBUG-73240
Change-Id: I7a80d96693cfa3374847c75c75b3167664609c1a
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The non-system harfbuzz feature doesn't actually have a condition
in the json file.
Change-Id: I4b74915f28da97d6ef8f89690e91306d243913ee
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This reverts commit 5ebb03c476.
Reason for revert: Removing flagBits breaks the batchrenderer in declarative, which accesses them via QMatrix4x4_Accessor. If flagBits are still going to be removed, we need to first find a solution for the renderer.
Change-Id: Ib0a3fc7a327926f2245058c0e2ed30e8789aa75d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Similar to def272750c, put parentheses
around std::numeric_limits<Integer>::max, fixing:
qversionnumber.h(339): warning C4003: not enough arguments for function-like macro invocation 'max'
Change-Id: Id574f3a08973cf1408e015f155c8e658b04bd170
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Volker Hilsheimer
Allan Sandfeld Jensen
Liang Qi
Shawn Rutledge
Eskil Abrahamsen Blomfeldt
Andy Shaw
Mitch Curtis
Lars Knoll
Martin Storsjö
Eirik Aavitsland
Joni Poikelin
Vitaly Fanaskov
Konstantin Ritt
Christian Ehrlicher
Thiago Macieira
Qt Forward Merge Bot
Simon Hausmann
Morten Johan Sørvig
Tor Arne Vestbø
Tor Arne Vestbø
Lorn Potter
Topi Reinio
Andre de la Rocha
Paul Wicking
BogDan Vatra
Fabian Kosmale
Mårten Nordheim
Michal Klocek
Kai Koehne
Leander Beernaert
Giulio Camuffo
Timur Pocheptsov
Oliver Wolff
Sze Howe Koh
Alexander Volkov
Sona Kurazyan
Ulf Hermann
Jean-Michaël Celerier
Alexandru Croitor
Giuseppe D'Angelo
Robin Burchell
Mauro Persano
Laszlo Agocs
Nico Vertriest
Edward Welbourne
Friedemann Kleint
Volker Krause
David Faure
Edward Welbourne
Lucas Wang
Harald Meyer
Andy Nichols
Marc Mutz
Cristian Adam
Kari Oikarinen
Jarek Kobus
Joerg Bornemann
BogDan Vatra
Lars Schmertmann