Add indent to the title if groupbox alignment is set to Qt::AlignLeft |
Qt::AlignVCenter.
Fixes: QTBUG-121049
Pick-to: 6.7 6.6
Change-Id: I25e2fe4e73b920baf4c678b6b0e758d1da7cf632
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
It appears to be used only in qlalr, which is, however, not
bootstrapped.
Pick-to: 6.7 6.6 6.5 6.2
Change-Id: Idc16d957bf687238c7b0ee603d8b092e2048ef18
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test uses socketpair which is not available on vxworks, so it fails
to compile.
Task-number: QTBUG-115777
Pick-to: 6.7
Change-Id: I46f3b4ebd937dc4ca2511381dd58451434e6a2fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
According to the documentation:
GL_INVALID_OPERATION is generated if the combination of internalFormat, format and type is not one of those in the tables above.
https://registry.khronos.org/OpenGL-Refpages/es3.0/html/glTexImage2D.xhtml
We were allowing the RGB values be passed as RGBA, after this change we
don't do so anymore.
This would result for KWin in:
Mesa: User error: GL_INVALID_OPERATION in glTexImage2D(format = GL_RGBA, type = GL_UNSIGNED_BYTE, internalformat = GL_RGB8)
Pick-to: 6.5 6.6 6.7
Change-Id: Ifde8a570eff01be573f780655d8cedbb96f5ba2b
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The boundingRect and controlPointRect did not use the start point from
the `QPainterPath(const QPointF &startPoint)` constructor until the
`dirtyBounds` or `dirtyControlBounds` member variables were set to true.
Those two are false on construction. This bug was fixed by adding a new
constructor for QPainterPathPrivate that initializes the `elements`,
`bounds` and `controlBounds` member variables with the start point from
the constructor.
There is also an autotest to verify that the top left of the
boundingRect and controlPointRect are at the same position as
elementAt(0) when the start point constructor is used.
[ChangeLog][QtGui][QPainterPath] boundingRect() and controlPointRect()
now use the start point from QPainterPath(const QPointF &startPoint).
Pick-to: 6.7 6.6 6.5
Change-Id: I7bf30364406c14ed60f75d24b78a9a5535f75d93
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Unlike other containers, a QBitArray's size() is not limited by
storage, but, esp. on 32-bit platforms, its size_type: A INT_MAX
size() QBitArray only requires 256MiB of storage.
So we can't rely on "won't happen in practice" here and need to avoid
the potential UB (signed overflow) in the (size + 7) / 8
logical-to-storage-size calculation by using unsigned arithmetic.
Use the opportunity to Extract Methods storage_size() and
allocation_size(), which differ by one (d[[0] contains the size() mod
8), making it clear what's what.
[ChangeLog][QtCore][QBitArray] Fixed a bug with QBitArrays whose
size() came within 7 of the size_type's maximum.
Pick-to: 6.7 6.6 6.5 6.2 5.15
Change-Id: I5d94bae9c9c210ba1e36f8cf03609125c81bd15d
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
I've noticed that on some Windows systems, the resolver refuses to
resolve IPv6-only addresses. But it can still do reverse resolution from
IPv6.
Change-Id: I5dd50a1a7ca5424d9e7afffd17adfe739ded932e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Our ideal scenario was to run python to run its getnameinfo()... so just
use getnameinfo() directly. This also avoids the problem of Python not
being present and our falling back to nslookup.
Pick-to: 6.7
Change-Id: I5dd50a1a7ca5424d9e7afffd17adfc830386306f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add classes that make it possible to add QML as a View into
a native Android app:
QtView: Base class for QtQuickView, handles non-Quick dependent
operations. In essence a Java ViewGroup class which loads a
QWindow and embeds it into itself.
QtEmbeddedLoader: Extends QtLoader for embedded case, creates the
embedded version of QtActivityDelegate and provides an embedded-specific
path to loading Qt libraries (Mostly just allows users to set the name
of the main lib)
QtAndroidWindowEmbedding namespace: Deals with calls from
QtEmbeddedDelegate to create/destroy QWindow and from QtView to
show the window.
Take the QtEmbeddedDelegate introduced in an earlier commit
into use, and add functionality for loading QWindows for
QtViews and managing QtViews into it.
Add a factory for creating instances of QtEmbeddedDelegate.
The factory holds a map of QtEmbeddedDelegate objects and
creates them, with the Activity as the key. This is to make
it so that the same delegate can be used by multiple views
which share the same Context.
Known issues left:
* keyboard focus not working, as with other child windows
Pick-to: 6.7
Task-number: QTBUG-118872
Change-Id: I94a5f9b4f904c05cc6368cf20f273fcf10d31f17
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This partially reverts 4ecbe42ff4 .
The discussion is still ongoing to decide whether the new overload
should take a QBAV or QAnySV. See
https://codereview.qt-project.org/c/qt/qtbase/+/514588 for the details.
For the time being remove the new overload from the API so that this can
be backported to 6.7 (while keeping both dev and 6.7 in sync to ease
future backports).
Pick-to: 6.7
Change-Id: I4a279653d1941faeafd95dde7a8c741009c00c72
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the QtWindow constructor, creation of the layout and setting
the parent window were posted on the Android UI thread, leading
to them being called at a later point. If QAndroidPlatformWindow
did not have a parent at the point it was created in, but
setParent() was called shortly after, the QtWindow.setParent()
call with the actual intended parent got invoked before the
Runnable posted in the constructor got ran, leading to the
parent being overwritten with the null one passed to the
constructor, essentially leaving the QtWindow as a top level
one, while the QAndroidPlatformWindow was a child window.
The above would happen more often with foreign child windows,
sometimes causing hang ups when the parent of the foreign
child window was shown.
Creating the QtLayout outside of the Android UI thread seems
to be safe, as long as we only modify its view hierarchy inside
it.
Pick-to: 6.7
Task-number: QTBUG-116187
Change-Id: If1ed1983f5d6ba56e625148ee6a61771234a2aa1
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
QHttpHeaders uses QASV for the header name field, and this aligns
these functions with that. Furthermore having QASV as a parameter
will allow a wider range of string types to be passed as a
parameter (convenience).
Resulted from API-review
Amends: 56bb4ac484
Pick-to: 6.7
Change-Id: Iff42b75393b6470a2c34a1913dbe615bf21238db
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
These exhibit the problem described by a recent bug report.
Task-number: QTBUG-121485
Change-Id: Ia09acfa22e687ba096091a73f30df1ffd22a6e32
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
There were three things going on in this test (itself a sufficient
reason to split it up):
* Some reporting and checking of the default locale; the reporting is
duplicated in defaulted_ctor() and the check fitted more naturally
there.
* Checks that various combinations of language, script and territory
got resolved according to likely-subtag rules. These were handled
via a macro and natural candidates to become data-driven.
* A test that territory is preserved when it's the only given tag
(with a few known exceptions); broken out as a steparate test.
In the process, give the data-rows of the likely-subtag parts names
that let me extend their testing to also test construction from
string. The territory-only cases can't support that, as QLocale
doesn't support und_* forms of tags for unspecified language.
Change-Id: Id9f0fc46f30eb887b47931bad1619255acb44266
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace various QFETCH()/QCOMPARE() pairs with QTEST().
Just because it's terser.
Change-Id: I8496a293e3634991dcb33b8c7939f1c3028a63c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In the fontconfig, the fonts will be populated with the variable font
and the named instance from the variable font. In this patch, it will
skip the variable font, and populate the named instances from the variable font.
The FcFontMatch function ignores the FC_INDEX when match the font,
changed the code to match the FC_INDEX by iterate the font list.
[ChangeLog][Fonts] Added support for the named instances from the variable fonts.
Pick-to: 6.7
Fixes: QTBUG-111994
Fixes: QTBUG-112136
Co-authored-by: Peng Wu <alexepico@gmail.com>
Change-Id: Ic598d69a1e76109958fafa1226ea927656092319
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When a QMessageBox is created with setModal(true), the user can in theory
choose to show() it, and then return back to the main event loop, instead
of calling exec(). We tried to support that case via a single shot timer,
called on the next pass of the event loop, that checked if the applications'
current modal window was the alert, and if not, showed it at that point.
That logic failed when there were more than one alert show at the same
time.
We do maintain a stack of the modal sessions and their windows in the
Cocoa event dispatcher, so we could use that to check if a modal session
had been started for the alert's window, but a similar solution is to
just check the alert window's visible state.
Fixes: QTBUG-121557
Pick-to: 6.7 6.6 6.6.2 6.5
Change-Id: I6f52a53e8f678bb8a071e334a09ab30669d95bbf
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Back when we set the guard and _then_ destroyed the object, the
atomic_thread_fence was correctly placed between the guard setting and
the dtor invocation.
We know nothing about the payload type. For all we know it could be
some fancy lockless data structure. So in general we need the acquire
fence to synchronize the reads done by the dtor with stores performed
to the object in other threads. The acquire fence did that for us.
But when we reversed the two operations, the fence has moved to after
the dtor call, leaving the dtor unprotected. Move it back to before
the dtor call.
That leaves the store to the guard unordered w.r.t. the execution of
the destructor. To fix, make it a store-release instead.
Amends e3e2674100.
Pick-to: 6.7 6.6 6.5
Change-Id: Ic7adbe17c8b474e82af4e84950c0109984b495d1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of separate QJsonObject and QJsonArray types.
Resulted from API-review
Pick-to: 6.7
Change-Id: I977d692d3709a8c3aa872683ddda54a143c25e67
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This naming should make it clearer that (successful) calls to
readJson(), readBody(), and readText() consume the data received
so far.
Resulted from API-review
Pick-to: 6.7
Change-Id: I09ca9eac598f8fc83eecb72c22431ac35b966bf5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
In operator<<(), stream the QJsonDocument directly, instead of
toJson(Compact).
This is how QJsonDocument operator<<() also does things, but that
knowledge should be need-to-know, and QJsonArray doesn't, seeing as
operator>>() just streams a QJsonDocument, and then calls toArray().
Pick-to: 6.7 6.6 6.5
Change-Id: Ia378bf0fb04ce33e3af24a2ce67778e89c41e31a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The only user of the vector passes begin()/end() to BitIStream, which
appears to be 64-bit-clean.
Pick-to: 6.7
Change-Id: I4ad0b9e9547008fecc4c816cc92ff9db4b2066e3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
To accommodate the deduplication and non-owning changes
in previous commit.
Resulted from API-review
Pick-to: 6.7
Change-Id: I61eb071503d6714c7fd42b3fe533698a8dcd2e27
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Jaishree Vyas <jaishree.vyas@qt.io>
To accommodate the deduplication and non-owning changes
in previous commit.
Resulted from API-review
Pick-to: 6.7
Change-Id: Ie1c4e9959c1ba7e8ed2be6607d9f6497ae15af39
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Note: documentation will be updated in a follow-up commit
This commit makes QRestReply and QRestAccessManager
classes lighter, non-owning wrappers. Furthermore their
APIs don't duplicate the wrapped QNetwork* APIs.
This makes it easier to use / opt-in to these helpers
in pre-existing applications which are based on
QNetworkAccessManager and QNetworkReply.
Since APIs are no longer duplicated, the QRest
classes are more obviously a convenience _wrapper_,
as opposed to being an alternative vertical stack.
In practice this change consists of:
- QRestAM never instantiates QNetworkAccessManager,
but accepts it via constructor. It does not take
ownership of the QNetworkAccessManager.
- QRestReply accepts QNetworkReply via constructor. It
does not take ownership of the QNetworkReply
- Signals and most duplicated functions are removed
from both QRestAM and QRR.
- QRestReply is no longer a QObject
- Since QRestAM doesn't have much to report anymore,
the debug operator is dropped.
Resulted from API-review
Pick-to: 6.7
Change-Id: Ib62d9cc2df41cac631396a84bb7ec4d2d54b0c8c
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If the line width is negative, then we might exit the layout
loop before consuming any text, and thus the loop will never
finish. This is a side effect of a change for maximumWidth:
991c056438.
49a63d3759 fixed this issue for
QTextLayout::setFixedSize(), but I forgot to do the same in
the overload of QTextLayout::setNumColumns() which includes
an alignment width and therefore sets the line width in addition
to the column count.
Basically, we just make sure the line width is never negative so
that the width > line.width condition also means the width > 0.
Pick-to: 6.5 6.6 6.7
Fixes: QTBUG-115459
Change-Id: If904bfc64cd74e819a0864db55fa9555073d0781
Reviewed-by: Vladimir Belyavsky <belyavskyv@gmail.com>
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Small rearrangement to make diff on later variant/union commit
more readable
Pick-to: 6.7
Task-number: QTBUG-119002
Change-Id: I3f6120b5dcd324b6493072d2eb58209866fb7dc6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The implementation calls a const member function on the QJniObject
passed in, and no move happens. And the parameter is not a universal
reference either.
Found during header review.
Pick-to: 6.7
Task-number: QTBUG-119952
Change-Id: I9479df798178b089277aa230f50f4e73f38ceb2c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
QJniObject is not prepared for being subclassed (no virtual destructor),
and doing so is formally UB.
Instead of making QJniArray(Base) a QJniObject subclass, give it a
QJniObject member and make it convertible to/from QJniObject. Existing
code still works with this change, even though it removes all the
inherited QJniObject APIs for accessing fields and methods. However, as
the Java array classes have a very narrow and well-defined API anyway we
could, if needed, add those as C++ member functions instead of going
through calling-by-string.
Found during API review.
Pick-to: 6.7
Task-number: QTBUG-119952
Change-Id: Ic4437116eed5e15226449bdabe48ab657cb14dc3
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Java still only can handle arrays of at most 2^31 entries, and the JNI
API for working with arrays is using types that are essentially int.
Assert that the container passed in is not larger than that.
Found during API review.
Task-number: QTBUG-119952
Pick-to: 6.7
Change-Id: Ia0cbdbf098cf5b2c8ec50f0dd24dadf833bf40d0
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Add rbeing/rend overload, relevant typedefs, and decrement operators.
As a drive-by, add noexcept to begin/end functions.
Found during header review.
Pick-to: 6.7
Task-number: QTBUG-119952
Change-Id: I32d9a7d50a1f03550944c2247516c455d4822fe7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Augment test case. Found during header review.
Pick-to: 6.7
Task-number: QTBUG-119952
Change-Id: I326395397167edb05ff1f45f7151614c02b7e7eb
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Add missing nested typedefs for both the QJniArray container and
the QJniArrayIterator. Expand test case to make sure that some standard
algorithms (such as std::distance and ranged for) work with those
types.
Found during header review.
Pick-to: 6.7
Task-number: QTBUG-119952
Change-Id: I96f348215c6f1e0e1ce777d9bdd2f172d7e52974
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Version 883ced078a83f9d79a98933145425c221a5e51f0, fetched on
2024-01-25.
[ChangeLog][Third-Party Code] Updated the public suffix list to upstream
SHA 883ced078a83f9d79a98933145425c221a5e51f0.
Pick-to: 6.7 6.6 6.5 6.2 5.15
Task-number: QTBUG-121325
Change-Id: I95e82b5c351218c1641e11e7a166ae21be2c5ad6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QCalendar is not a trivial type, so using it as a default argument in
various fromString() overloads introduces an extra overhead.
In this case the function actually always needs a QCalendar object,
and a default-constructed QCalendar reproduces a valid gregorian
calendar. But getting rid of a default argument still gives us the
benefit of constructing the object only in the library, not at every
call site.
So, split each overload into two - with and without a QCalendar
argument.
Amends 41f84f3ddb
Found in 6.7 API review
Pick-to: 6.7
Change-Id: I7329276cbda0e5471dc5348af92fc8c9ca4e0738
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
MS says we should stop using LCID, so make a note about that.
This file should only be compiled when Q_OS_WIN is defined, so
don't bother with #if-ery to check that.
Remove two redundant forward-declarations.
Record what qt_localeFromLCID is for - undocumented private API
exported for the use of a platform plugin - since that isn't
immediately obvious to someone only looking at QLocale.
Change-Id: I81ad945bb92d4f81a3ca2aaf97a945635b137a2e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Giving it a symbolic name is clearer (and saves me the need to
duplicate the comment when I add some more references to it).
This amends commit bcdd51cfae
Task-number: QTBUG-115158
Change-Id: I7577e0cde783fcda840009c7aea46934964c6e4c
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
The existing caller returns early on finding a match, so never ran off
the end of the iteration unless there were no matches. I'll soon be
adding a new caller that wants to iterate all matches, so will run off
the end even when there are some. So only raise the Error if we found
nothing.
Task-number: QTBUG-115158
Change-Id: I1cae4674eb5e83c433554c15ecc4441b756f20eb
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
The Supplement type did the needed mapping (using nodeValue when the
value wasn't a string) and it turns out to be useful to do the same
for the DOM object packaged by a Node, too. Pull out into a helper
function, use dict-comprehension and expose as a method of Node.
Change-Id: Ice6737a54a33372b45cf42152e3fdbf5f2da7ba4
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Actually triggered by investigating QTBUG-121485, where the issue
turns out to be at construction time, but the complete lack of any
testing of endonyms clearly needed addressed in any case. In the
process, break up the long list of private slots in the test-class
declaration.
Task-number: QTBUG-121485
Change-Id: I49021f78d3bea2e1e55b2755a45943ab3fc23722
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Every test row was following its locale-specific test with tests for
Irish and Greek day names, repeated regardless of the locale-specific
data. Express these tests as rows in their own right and shorten the
per-row testing, so we only do each once.
Change-Id: I8f919b50ac54423bacab6e5a9d34254b7db59a55
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the process, change it to use QCOMPARE(A, B) rather than QVERIFY(A == B).
Change-Id: I26c64100b08aef43c56f5266c0de71f5cde12816
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The mutable operator[] method was marked as inline only at the
definition, not the declaration. This is known to cause compilation
failures on MinGW when the function is used in other inline
implementation (cf. e.g. QTBUG-56459). It's not, atm, but fix the
issue proactively.
Pick-to: 6.7 6.6 6.5 6.2 5.15
Change-Id: If805122d9f8dbd72641173509c4b860c20fc1cdc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Amends 104a0a9ecd.
Right now it's no problem for the only two places we use it, but it
could be a problem if someone accidentally forgot when using the macro.
Pick-to: 6.7 6.6
Change-Id: I5dd50a1a7ca5424d9e7afffd17ae0a09dc7dd8c1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
On most platforms EWOULDBLOCK is defined to be equal to EAGAIN.
However on some platforms (like VxWorks) it is not the case.
Because of that, error returned from ::write is not handled properly on
such platform.
Since C++ does not allow duplicate switch labels, check if EWOULDBLOCK
and EAGAIN have different values before adding EWOULDBLOCK to the switch
statement.
Task-number: QTBUG-115777
Pick-to: 6.7
Change-Id: I659cb946f239733f5c57b2000fb4e3d296ed9153
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Simo Fält
Ghenady Kuznetsov
Marc Mutz
Łukasz Matysiak
Aleix Pol
Ahmad Samir
Noah Davis
Thiago Macieira
Tinja Paavoseppä
Juha Vuolle
Edward Welbourne
Akira TAGOH
Tor Arne Vestbø
Eskil Abrahamsen Blomfeldt
Volker Hilsheimer
Mårten Nordheim
Ivan Solovev
Kai Köhne