qdoc did not resolve QML Inheritance correctly and the result was that
QML inheritance was not shown correctly in the documentation. Part of
the problem was that information was missing for QML types in the .index
files produced by qdoc. qdoc also did not show inheritance properly
when one of its base types was marked internal. These problems have
now been fixed.
This update also fixes the problem that caused qdoc to slow down to a
snail's pace over time. The group members list for certain group pages
was getting longer and longer, because qdoc added the same member to
the member list an additional time every time qdoc was run in -prepare
mode if you didn't clear the index files first. Now, qdoc only adds a
member to the member list if it isn't already in the member list.
Task-number: QTBUG-29778
Change-Id: Ie4f0458a2ea4ceb1a64cdcd7f60f16b124a20790
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Change-Id: I09286388e9af7ec472b394be87204746f8ae22b1
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This now includes support for OpenGL 4.3
Change-Id: I964284843dffe806280e7f67cde67f17e84dc6df
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Before a buffer swap the new QEglFSHooks::waitForVSync method is
called which looks at QT_QPA_EGLFS_FORCEVSYNC and - if that is set
and non-null - calls ioctl with the FBIO_WAITFORVSYNC request on
the framebuffer device.
This is required on some embedded platforms where the driver does not
support VSYNC yet the Kernel provides a generic implementation.
I tested this using QML_RENDER_TIMING=1 which proofs that the frame
rate for an example of mine drops from >125fps to a straight ~60fps
with a few frames that take ~33ms (i.e. 30fps) as expected for VSYNC.
To prevent excessive open/close calls on the frame buffer device
per frame, the file descriptor is now cached. To keep the QEglFSHooks
interface as clean as possible this is done via a global static in
qeglfshooks_stub.cpp and initialized and freed in platformInit and
platformDestroy.
Change-Id: I4d31b227c65ff22aa089db0fbc62c89a59cbb6c7
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
These will be needed by the upcoming OpenGL enablers so move them
out of qopenglfunctions.h to somewhere that any opengl related file can
access them.
Change-Id: I0c788559397d446ec7210e2ad940da862179710d
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
On Mac OS X 10.7 (if System Preferences -> General -> Show scroll bar is
"When scrolling") scroll bar was shown even if policy was set to
ScrollBarAlwaysOff.
This is a regression from 5.0.0.
Change-Id: I161b350874c085a1397df7b398af8f3fb0fbeacf
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
When performing macro argument substitution, one should keep the set of
macro to exclude, else we can enter an infinite recursion.
Testcase:
#define M1(A) A
#define M2 M1(M2)
Task-number: QTBUG-29759
Change-Id: I564bbfed65e1c8599592eaf12c6d67285d2fd9ce
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The motivation for this patch is twofold:
1: we need a way (for iOS/Android) to tell the current window to remove
focus from the focus object when the user hides the input panel.
Otherwise, if the focus object is e.g a line edit, the cursor will
continue to blink inside it, which is wrong. As it stands, telling
the active window to deactivate
(by calling QWindowSystemInterface::handleWindowActivated(0)), will cause
the whole application to deactivate if no windows are active, which
is not what we want.
2: Qt currently understands just two application states, Activated and
Deactivated. On mobile platforms we can have other states
as well, like "suspended" on iOS. So controlling the application
state should not depend on window activation, but instead be controlled
through a separate API by the platform plugin.
This patch will add the following function:
QWindowSystemInterface::handleApplicationStateChanged(Qt::ApplicationState newState)
that lets us control the application state from the plugin. This also
means that we factor out application state handling from window
activation, which also gives us a way to remove focus from a window while
keeping the application active.
To not break existing desktop platforms that relies on application
activation being tied to window activation, we need to make this API
opt-in by using a platform integration capability hint. This is not optimal, but
found necessary after investigating several other solutions.
Which states (other that active/inactive) it makes sense
to add to Qt::ApplicationState will be a topic for later patches.
Change-Id: Ic6fdd3b66867abb67da43eba04ec86f06d82ff94
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This fixes QMetaType detection of const reference arguments in signals
while connecting using the new syntax and Qt::QueuedConnection
const references should have the same QMetaType as non references.
That means we need to remove the const reference while getting the
QMetaType.
Change-Id: I9b2688da7fb9ae985aec0d8fa62a1165357ffe71
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Now that we always build against an SDK, we can be sure that the
function declaration for CTFontCopyDefaultCascadeListForLanguages
is available in the CoreText CTFont.h header.
Change-Id: I304a701548833e5c7774b4fd2e72eb8c541dd103
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This change lets you call QHostInfo::lookupHost() with a null receiver
in order to warm up the DNS cache. This allows you to try to get the
DNS request in flight early.
Change-Id: Icfdd28146479aa534ae9ceb472f75e08aaa39cd2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code snippet demonstrating the use of drawText() was already
updated to use the text 'Qt Project' - update the image accordingly.
Task-number: QTBUG-29784
Change-Id: Iea5e729bd26df2d8ab6a02bb7ea804494e554a28
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This change adds some QML property, signal, and method
data to the .index file. It also provides more robust
resolving of QML inheritance for qml types.
Task-number: QTBUG-29778
Change-Id: Iaefd64227913a19f427b21e904ca5e32c82d7b29
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
It was not possible to extract data from the archive on OSX
which was created on Windows platform because of wrong
separators. Archive was created on Windows via QZipWriter and
opened on OSX with QZipReader. It consisted of a lots directories
and subdirectories with files. The solution is to use '/' separator
for internal representation.
Change-Id: Ic0837ca184bb6188129d53b587a5df2ec61e4e05
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Activate the window of the widget under mouse pointer before replay mouse
press event.
Change-Id: I9e699374accf108aa49b2a3c73d5e76631100dfd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The patch adds handling for a case when a QVector is shared between two
threads. In such scenario detaching in one thread could collide with
destruction in the other one, causing a memory leak or assert in debug
mode.
Task-number: QTBUG-29134
Change-Id: Idbff250d9cfc6cf83174954ea91dbf41f8ea4aa4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adds documentation for example manifest files and the related qdoc
configuration command \manifestmeta into QDoc manual.
Change-Id: I6a627698ab14f57c9a117b6d4b794f352959f5ac
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Do not spin off progress bar animations if QStyleOption::styleObject is not set.
Task-number: QTBUG-29748
Change-Id: I4e17a4892e82cae48250afa7a270b15ca5730f46
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This is not always reproducible, but it probably crashed because
QStyleSheetStyle::polish() can do some nasty things such as creating
and deleting objects, which can leave the list with dangling QObject
pointers.
However, it should not delete QWidgets, so we make sure we only have
a list of QWidgets before we perform the polish iteration.
Change-Id: I84c1ca6a7316e72348248ff056b65dcbae3d20a3
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
There were race conditions when accessing the plugin factory and
the image reader plugins from different threads; ref QTBUG-29281.
Added a mutex lock to avoid.
Change-Id: Ic1a3b6cbaf5603f1bcf7025b58247a9a3f6d08a9
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
URLs containing spaces (encoded) couldnt be opened using QDesktopServices::openUrl() -method.
This is a regression as it works for 4.8,
Using url.toEncoded() instead of url.toString() which removed percent encoding.
The NSUrl uses RFC 2396 for parsing, and according to the documentation,
of 2.4. Escape Sequences - Data must be escaped if it does not have a
representation using an unreserved character;
And as a space does not have a representation using unreserved character it needs to be
escaped.
Example: Using this url, http://www.google.com/search?q=testme%20withspace
url.toString() returns "http://www.google.com/search?q=testme withspace"
and url.toEncoded() returns, http://www.google.com/search?q=testme%20withspace" which is
also the expected result.
Task-number: QTBUG-29124
Change-Id: Ieed3d4cfb689b9311f6cf21e5098a1e70256ab03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 15fc255c7c.
The change was not compatible with the oxygen-gtk theme engine.
Furthermore, GTK3 compatibility in QGtkStyle is not important,
since it won't be feasible to support both GTK2 and GTK3 in
the same style implementation.
Conflicts:
src/widgets/styles/qgtkstyle_p.cpp
src/widgets/styles/qgtkstyle_p.h
Task-number: QTCREATORBUG-8524
Change-Id: I8ea6dcfd1f432d51b306a5d9f6c4106137979c5a
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
When the cursor specified is a bitmap one we cannot cache it based on
the shape as the pixmap set on the cursor may be different. Therefore
we should always create a new cursor in this instance.
Change-Id: I2c201590ff632490d76c1b423908ae32aa584eb6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
When setFloating(true) is called before show, frame strut events
are not enabled for the native window (since there is none yet)
in QDockWidgetPrivate::setWindowState(). In that case, do
it in the show event handling.
Task-number: QTBUG-29012
Change-Id: I93b679f20200c149d608a1bcc65b4936a035c6a0
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
When QProcess->start() is called, Qt creates a pipe to the process to
get its exit value and output.
It does this with qt_create_pipe, which calls qt_safe_pipe.
qt_safe_pipe, on failure, returns 1. qt_create_pipe then
sets errno and returns void.
The calling function, QProcessPrivate::startProcess, does not check
errno, and thus continues to fork the process, assuming the pipe has been
created successfully.
The child process then has no way to pass its exit value to the calling
process, since the communication pipes it would normally use do not
exist, and thus when it exits it becomes a zombie.
As a bonus, if waitForFinished is called on a broken process, a crash
results because it is trying to wait on a pipe which does not exist.
The fix makes qt_create_pipe return an integer, and QProcess::startProcess
check the return value, set processError and not create the child
process.
Task-Number: QTBUG-18934
Change-Id: I2e1effdd0617be5b8c5492bcbcf5f2b1584b2241
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QAbstractSocket API has been already using this as a return type. Hence,
this has already been exposed to the public API users, anyhow.
http://qt-project.org/doc/qt-5.0/qtnetwork/qabstractsocket.html#socketDescriptor
A minor mistake has also been fixed in this commit at the quintptr section.
Change-Id: I8143b3050428548ff6baee2e3a0bce4058ea8701
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add an encrypted signal to QNAM and QNetworkReply to allow applications
to perform additional checks on the certificate chain beyond those done
as part of the standard SSL validation. This allows things like
certificate change notification to be implemented for QNAM as they can
be for QSSLSocket currently.
Change-Id: I693e3e6fec8b7040379b7e7f1f819550e6b2617f
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Add intermediate certificates to our server sockets, and to our client
certs.
Change-Id: Ib5aa575473f9e84f337bebe35099506dd7d7e2ba
Task-Number: QTBUG-19825
Task-Number: QTBUG-13281
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Instead of storing a single QSslCertificate for a the local cert, store
a list of them. This will allow us to handle server sockets that use a
certificate that is not issued directly from the CA root in future.
Change-Id: I9a36b9a99daa9c0bdd17f61b4ce1a7da746f2e96
Reviewed-by: Peter Hartmann <phartmann@rim.com>
When rendering to PDF using the PDF paint engine on Mac it would
consider it to be rendering as HIDPI when ScreenResolution was used.
This would mean nothing was being rendered at all in the PDF as a
result.
Task-number: QTBUG-28709
Change-Id: Ieb97ca9d0b47f6b96debbcf5e05e96c39292e412
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We also have to make sure that when moving back to a page
that has a focusWidget(), the focus should go to the focusWidget()
Task-number: QTBUG-18242
Change-Id: Ibfa7d6361c1a456480b2f1584a88ef4c4f405709
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Exhausting the symbol list while looking for the
final right parenthesis means it is missing.
Task-number: QTBUG-29308
Change-Id: Iccf5897b0f5eb719699fd12d6c8e4a16ff189d9b
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
In the rare event of an invalid sized window, the application crashes
because libscreen doesn't like creating empty buffers.
Not creating the buffers at all would also be a solution, if we didn't
have QPainter crashes due do null paint devices.
Change-Id: I561d0082576b6226dd52129f9640952ba46273c8
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This is the same fix that was already done in qprinter.h
/usr/include/bits/termios.h:122:#define B0 0000000 /* hang up */
so the compiler sees B0 as a numeric constant
Task-number: QTBUG-29704
Change-Id: I2df5e1783f3142558cbc1606e0c61fcf636f2de8
Reviewed-by: David Faure (KDE) <faure@kde.org>
QEglFSWindow does not request highestPixelFormat, and can obtain a 16-bit
config when requested. QEGLPlatformContext does request highestPixelFormat,
and can obtain a 32-bit config when a 16-bit config is requested, leading
to this error.
Change-Id: I418c09a35ec19b2e9ca372b32599034e02384e44
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
-QDoc doesn't differentiate between \badcode and \code. They both
look the same in the output.
Change-Id: Ifabd51b7e433a1c30cf30c267d3ce63dded1bd43
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
By default we still use QIconLoaderEngine but now platform theme plugins
have the opportunity to override that. It is in particular planned to be
used in a WIP platform theme plugin for KDE sessions.
Change-Id: I07a82dc91daea44709b3a790f3f6e2a7a090d108
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
If FBIOGET_VSCREENINFO doesn't give us sensible values we need to
default to something instead. Refactor the code that queries the
resolution and depth to behave the same way.
Change-Id: Id2b3fc41349a74610856273b10281f744612890b
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Exhausting the symbol list while looking for the
final right parenthesis means it is missing.
Task-number: QTBUG-29308
Change-Id: Iccf5897b0f5eb719699fd12d6c8e4a16ff189d9b
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Call setOptions() such that the option takes effect.
Task-number: QTBUG-28817
Change-Id: Ibef834efc988d3ba49e88ea88ef475b1fd7fd98f
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
We no longer support OS X < 10.6, so there's no need to check for it.
Change-Id: I2628984846de0c0c19ea86b3ba6d00fc370ddae7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The function we use to get the actual vsync on cocoa is documented
to return 0 if the monitor is not a CRT monitor. A refreshrate
of 0 means we have vsync deltas of 1000/0 which cause problems
elsewhere. It is better to use the "default" value in this case
as it will be closer to correct than 0.
Change-Id: Id08007e40a9af5e42f13a07628fcad5fd3a7d0dc
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Inherits QSurface and allows to use OpenGL from an arbitrary thread.
Platform plugins can implement QPlatformOffscreenSurface, otherwise an
invisible QWindow is used by QOffscreenSurface.
This patch includes an implementation of QOffscreenSurface for XCB
and EglFS platform plugins using pbuffers.
Change-Id: I57b4fc1db417331f34826dcfa754b7698782fde4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This should select the best mode (likely the currently running mode)
for the display instead of the first one found.
The built-in mode was left as a fallback.
Change-Id: I4e1bc798df6f310b001566ab76cb9def3224a7ed
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
GBM provides a way to write directly to a buffer object that gets set
as the drmMode cursor. This eliminates the need to create a GL texture
and opens this class up to platforms that support GBM but not OpenGL.
Change-Id: I7297827387ef9a717a5287b5484f14c9987b4158
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
- Use qtHaveModule to check for OpenGL
- Add __GBM__ to pick up the correct native types in the Mesa EGL headers
Change-Id: Idfc0e81e95672b08ba8f259b9d7edf2b25fd1bad
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
A QGraphicsProxyWidget embeds a focusable widget (e.g., QComboBox). When
deleting QGraphicsProxyWidget, the QWidget will be deleted. The QWidget
clears focus, and QWidget::hasFocus() is nice enough to check if its
embedder QGraphicsProxyWidget has focus - because if it does, it wants
to clear focus from that item too. QGraphicsItem's destructor already
calls clearFocus() however, so this call is unnecessary; we can simply
stop clearing the QWidget's focus in its destructor if the widget is
embedded.
QWidget::hasFocus checks QGraphicsItem::hasFocus (on the proxy widget
that is being deleted), which checks its d_ptr, which is gone. It's
generally unfavorable for an object deleting a child to have the child
go back and poke at the parent object, which is in many ways what's
happening here.
Task-number: QTBUG-29684
Change-Id: I1e52bf28f47b2824752de28dff2d0de13733ee48
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The crash is deep inside QGraphicsSceneIndex, which calls boundingRect()
on the item that is being destroyed. The vtable is busted, resulting in
a pure virtual function call. There's a more proper fix for this lying
around somewhere but in this particular case we can get the test to
not crash by guarding based on whether the item has a cursor set. This
also happens to speed up QGraphicsItem destruction a bit so I figured
it's a win-win situation to fix it. This case will still crash if the
item actually had a cursor set but that makes the case even more narrow.
Generally speaking, creating objects partially on the stack and
partially on the heap, mixing parent/child relationships and then
deleting one of the heap objects is quite sketchy and I doubt it happens
much outside of this unit test.
Change-Id: I25393d2cafb1256269ab6681519bd554cc380bfd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The former was introduced with Mac OS 10.6 and can also be used
for checking iOS versions, so it's preferable. We still include
the old availability header, and use it in various places in Qt,
and so does the Mac OS frameworks, so there's no need to phase
it out, but for new platform checks we want to use the updated
macros of the form:
#if __MAC_OS_X_VERSION_MAX_ALLOWED > __MAC_10_7
Ideally you should not use the named version macro, and use 1070
instead, in case you build against an SDK that does not define
the named version yet, but we take care of defining these
in qsystemdetection.h for convenience.
Change-Id: I9cfa72e37816583f28ff9643793f111e155b7789
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
AvailabilityMacros.h will pick up the MACOSX_DEPLOYMENT_TARGET environment
variable, as well as the -mmacosx-min-version= command line flag, and
set the MAC_OS_X_VERSION_MIN_REQUIRED based on that. By setting the
define before including AvailabilityMacros.h we essentially skipped
that whole logic and always set it to 10.6.
Only in the case where there's no deployment target specified on the
command line do we want to ensure that it's at least 10.6
Change-Id: Ic558ff4deb77937ea805b048d83949815b273bcc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt5 requires Mac OS 10.6, so we can remove checks such as
if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_6
Change-Id: Iea21727a277291148704ecf9677ed0b68c24920f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We now re-use QOpenGLExtensions/Functions from QtGui in the same way
as QtGui uses these classes. There is still some duplicated logic
in qglfunctions.cpp, but this code now at least uses the shared
QOpenGLExtensionMatcher class.
Change-Id: Ie04008c43d430ae805e6ec1c45e7e363deeb3b8f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Create an array of arguments in the same way
QMetaObject::write does
Task-number: QTBUG-29082
Change-Id: I4ea5ab5dcd6b55cf0a127b855b5aac27a9d4a305
Reviewed-by: Davide Pesavento <davidepesa@gmail.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This patch enables usage of the new NSUserNotificationCenter as part of
Mountain Lion. On earlier versions, or if compiled on earlier versions,
Growl will be used, if installed.
Change-Id: I676f9c63aa3c1ada19d36b6310ae90915be63011
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Modified QLocalPrivate::numberToCLocale to take a const QChar * and an
integer instead of a QString. This allows for passing QStrings and
QStringRefs into the same function. Updated the
QLocalePrivate::stringToDouble, QLocalePrivate::stringToLongLong, and
QLocalePrivate::stringToUnsLongLong to use this new function signature.
Change-Id: Ifee5dfcd9b743e1d3b9123a65007c89e8ed93e83
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
... because almost everybody gets it wrong almost every time.
Change-Id: I54938ef094323ba8de02186b585b11b9579f3ca4
Reviewed-by: Richard J. Moore <rich@kde.org>
This reverts commit d0804ff2dd.
The commit breaks JSC which is used by QtWebKit, QtScript and
indirectly by QtQuick1, which blocks integration stable->dev.
JSC should be fixed upstream, but until then we need to revert
the change.
Change-Id: I3f7b8be08b68181e08422d2cb00d7cd70a7fc07f
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
It's not part of the fallback list we read from the plist file.
Change-Id: Ieaf306d4cd51a6bb6e6f41048876d3e674a4b99b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Change-Id: Ic6b39825cf349f8ad8a56b1fb5dd3855f8675519
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Use the correct enum. GL_CONTEXT_FLAG_DEBUG_BIT does not have the same
value as GLX/WGL_CONTEXT_DEBUG_BIT_ARB.
Change-Id: I7d90da54ca1ff526c8b00669b486a68424fc8dfb
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This change makes qdoc support additional attributes and tags written
to example/demo manifest files. The goal is to enable highlighting of
selected items, as well as having additional content to make searching
for specific categories work better in Qt Creator welcome screen.
This meta-content is stored in manifest-meta.qdocconf, which is loaded
globally for all modules.
Tag handling is also changed to use a QSet to eliminate possible
duplicate tags.
Task-number: QTBUG-29354
Change-Id: I2c4b2dff6229172efbecc2bfc1c269017edc4d56
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Parsing for bound SQL parameters now handles identifier quoting using
double quotes (") and square brackets ([]).
The following has only 1 bound value but previously 2 were detected:
SELECT 1 AS "A?b[?']]]de?ghi", ?
Task-number: QTBUG-27159
Change-Id: Icfd02187e1126ff3b5ed11df8d4e599f574e61bf
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
On X64 Linux DB2 driver build give an error on BIGINT conversion to
QVariant, casting it to qint64 solved the problem.
Task-number: QTBUG-20172
Change-Id: I7ef31cbe643c90b40b86cf3d7c4d3b711eabf2f5
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The Mac specific classes in QtWidgets are currently excluded and aren't
available for use in Qt 5.0.x. In Qt 5.1 they will be available via
QtMacExtras, when the widgets.pri is changed then this can be removed.
Change-Id: I04fbb5204cbd5658efaf24171c5f8dac10fbfd35
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
reuse QSqlResultPrivate::positionalToNamedBinding for psql
Change-Id: I48713c3f94eb880cafff5fddbeadaa0746a405a9
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Change-Id: Ibaffadec9bf9e6e0d5609b7327b369d560e8e2ce
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Change-Id: If57f4fcea2e00a1910df5a5bd2b556289f4ffb21
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Change-Id: Ic2db719437a11019262cf299929115ffa11d3d34
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
It's the format class that lets you control the number of samples.
Change-Id: Id01f107a15787f33b65429d3c882854f2dc8784e
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The window position was getting passed as both the window
and global positions.
QTBUG-29543
Change-Id: I24746675e5ba45adbd054742877bd2fe783d6608
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
As long as fonts weren't used we supported using QImage in combination
with QCoreApplication in 4.x, and there's no reason we can't continue
doing so.
Task-number: QTBUG-29643
Change-Id: I2cf351d3c93f1c175bbf624e45024d39ab913111
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The bug was caused by changes b371f3f943
and 3bb9024952, which removed the event
forwarding that QWidget::mouseDoubleClickEvent() used to do without
making sure to call ignore() on the event like
QWidget::mousePressEvent() does.
Task-number: QTBUG-29680
Change-Id: I98af8052ad3dd1dea15d07a710aa9212ef5e4a68
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It's listed in the 10.8 SDK as CT_AVAILABLE_STARTING( __MAC_10_8, __IPHONE_6_0),
but not in the release notes for 10.8:
http://developer.apple.com/library/mac/#releasenotes/General/APIDiffsMacOSX10_8/CoreText.html
The iPhoneOS 6.0 SDK lists it as CT_AVAILABLE_STARTING( __MAC_NA, __IPHONE_6_0),
which matches the release notes, and some 10.8 systems in the wild apparently
do not have this function declaration in the system headers, so for now we'll
be conservative and not assume it's available.
Change-Id: Idbadda58ea95bfca75458d77cb2799c49fba013a
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
A bit mask can have more than one bit set, so we can't use a switch
statement here. Also use the correct enums, and make sure that the
profile is set to QSurfaceFormat::NoProfile when the OpenGL version
is less than 3.2.
Change-Id: I6d2c4e35d4fb3d87fd47c9724cb415f8619a7b95
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
there is no reason why testlib in particular should have them, while
every other module uses the standard strings.
Change-Id: I9b9e45957dfccbf02939c326dcebf06133098ede
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
$$quote() doesn't do what you think, unless you did RTFM.
and it's usually just as unnecessary as double quotes,
depending on context.
Change-Id: Iaeadaa75b0650aad383a6e6031b822c04b537fb1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It does not have any effect in a SUBDIRS-type .pro-file.
Fixes 42a6d405e4 .
Change-Id: If2eafacecfd69b916861bf4b0afddb62628d720f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is possible with QWeakPointer, so allow it for migrating
code too.
In the process, replace the QPointerBase with a member variable for
simplicity. The functionality of the QPointerBase is replaced
by a TypeSelector template.
Change-Id: I3b4c77bdeda2b863cc33e84a3da8a25bae928c8c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Transient scroll bars should never be used outside of scroll areas,
since they would be unusable.
Task-Number: QTBUG-29389
Change-Id: Ie52d2093a4ab66085300a19ca9a1b32f13a29e79
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
it's pointless to test the target platform - it's always windows. but it
may make sense to test the host platform (not sure whether it's possible
to x-build angle).
Change-Id: I57847c930d6108a24a1005aa44f94ba0b4f9dfec
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
use library function which deals with shell specifics to set up PATH
Task-number: QTBUG-29427
Change-Id: Ic2bed4d7f0eb072bcce6a9f99be02d3cd08a7c98
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
there is mightily little point in unsetting variables right before
unconditionally assigning to them.
Change-Id: I24c1814ce38bf9aab4496679b1a670f3cd55c536
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This was a regression bug owing to a big qdoc cleanup
for Qt5. But the way QML inheritance had been handled
was not a good design, so it has been changed here.
When a .qml file is parsed by qdoc, the base type of
the QML component is detected, and its name is stored
in qdoc's tree node for the component. After qdoc has
parsed all the QML files, it traverses the tree, and
for each QML component that has a base type name but
no base type node pointer yet, it searches the tree
for the base type node and stores the pointer to
the node in the node for the components. Then when
the output generator generates the doc page for the
component, it has access to all the inherited members
in the base type.
Task-number: QTBUG-29569
Change-Id: Ib4958d05f55fa48a572f8ca51ffd57712f29bbc7
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
A new glyph type is added to the glyph caches for ARGB bitmap glyphs,
and the raster and OpenGL paint engines have been modified to support
this glyph type for drawCachedGlyphs().
The CoreText font engine implements support for these glyphs through
the CTFontDrawGlyphs API, since CGContextShowGlyphsWithAdvances does
not handle color glyphs.
Change-Id: Idad9ce75a911cae130d65aebe59142772a16fc12
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The parent file has already set a variable for it.
Change-Id: I90ddda355a580f44ea7e1e44cc7df717fa0a8b7b
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If a popup widget(e.g. a popup menu) has been closed due to a mouse press
event, the mouse press event will be consumed by the popup widget and the
widget under the mouse pointer can't receive the event. This will lead to
confusing behavior such as a push button under the mouse pointer is not
been push down.
This patch replay the mouse press event if a popup widget has been closed.
Change-Id: Id493583dfea9e64ab2964e28d559122c43bbc2a6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The XCB plugin requested a forward-compatible context regardless
of whether QSurfaceFormat::DeprecatedFunctions was set, and also
ignored the QSurfaceFormat::DebugContext option.
Change-Id: I81c737447b554b3b6f61c2725bce7583e0e887ab
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This avoids warnings in compilers that check for unused variables. They
can't tell that the the variable came from a header.
Change-Id: I1ea5e5bbc76d676fbb561bdc8ae6543e758de90e
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change-Id: I18697037db742d38874c8a95df12c189ccc51068
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Lorn Potter <lorn.potter@jollamobile.com>
It's similar to Q_UNUSED, but this is to be added in the declaration
Change-Id: I2f664129fb1f34f7913ef371d45c2c0fec958174
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We need to clarify what's the status of the implicit capturing
group #0 in both of this methods. The former doesn't include it,
while the latter does for convenience/consistency in the way
we count the capturing groups.
(Note that this last behavior is actually autotested.)
Change-Id: I2170842c2a6dffa34fa56389ceead61a92c07cd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(?J) inside a pattern string can be used to allow or disallow duplicated
capturing group names in the pattern string itself.
Although PCRE supports duplicated names, in Qt we don't yet.
Change-Id: I21cd0c41273cd7ef42870ced3a0fad6ba7035cbc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Information about the pattern (number of capturing groups, newline
settings, etc.) are grabbed when the pattern is compiled the first time.
Studying (=> optimizing) is always done later, after a certain amount
of usages. In case this ever changes, add an assert.
Besides, we're not grabbing any info that require studying the pattern
first.
Change-Id: Ica15fa21f7bf13213288d7090d3396a89900078e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The current size hint is not correct and the text is truncated
when using prefix/suffix.
Update QCommonStyle::sizeFromContents() to get the button
and frame widths into account for the QSpinBox width.
Update sizeFromContents() in the different styles to be
consistent with the change in QCommonStyle.
Update minimumSizeHint(), calculate it using the prefix and
data range. The SpinBox can shrunk over the suffix if any.
Task-number: QTBUG-28863
Change-Id: Ia742232edf8b11d0283e8136c2818928f8755103
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
QStringRef could have been trivial. The destructor is empty, the copy
constructor copies exactly the members and has an empty body and all the
members are POD. Both functions should be removed or defaulted in Qt 6.
When the destructor is defaulted, we can make the constructor constexpr.
We can't do that now because QStringRef is exported and some nasty
compilers (MSVC) like to export all functions, even inline ones, and
then call them without emitting a local copy.
Change-Id: Ie7509fd1a3f737a6c9156ea078d13bb347fc6be0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
GL_ARB_debug_output only requires OpenGL 1.1 and above.
Change-Id: Ib79d370fac36fa737817ea678f0dee25283dfa31
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
On Mac OS 10.8 and iOS 6.0 we can use CTFontCopyDefaultCascadeListForLanguages
to get the list of fallback fonts, which is preferable to reading the plist
file from the filesystem. The latter doesn't work (is not allowed) on iOS
in any case, so for iOS < 6.0 we use a static list of fallback fonts.
Change-Id: Ibb5e1b4dedd6bfb936f66b53a20f7ced83536ed7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
In some situation (such as iOS currently) we may end up with an empty
fallback list, and we don't want to re-populate the font database
on every call to fallbacksForFamily().
We do not guard populateFontDatabase(), since it's called both initially
and every time the font database has been invalidated.
Change-Id: Ief1342c40f75e5d393e054e9a20bc94bc357d482
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
QPixmap::load() would not detach, so multiple paths could get associated
with the same QPixmap, causing the wrong pixmap to be shown.
Task-number: QTBUG-29639
Change-Id: I064dd6a9611b5996853bec9fb20b6224a0adcf62
Reviewed-by: aavit <eirik.aavitsland@digia.com>
This finally makes it possible to make windows fullscreen etc from
QML by doing "visibility: Window.FullScreen". I don't see any reason
from not having the API at the QWindow-level instead of at the
QQuickWindow-level since this way it can benefit other use cases too.
Change-Id: If27344306eb563bc2ccd83296a46b1f2862e2db1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The missing "/" in front of "../Plugins" prevents
this from working - platformPluginPath is never
set.
Deployed platform plugin loading works in spite of
this via qt.conf which adds the plugin path to
QCoreApplication::libraryPaths().
Change-Id: I7ae4d13c65a380ddad72bffd29b776c39ea91c8a
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Additions to make the convenience classes work for the
Qt for Android port.
Change-Id: I25ba0faf93c7e09ab04a3fa0784e04631e5ab036
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This patch changes QGraphicsViewPrivate::updateRubberBand to return
at once in case some of the first conditions (which were needed to
do something with the rubberband) are not true.
The indentation after these ifs is fixed, and there are a few style
fixes, but beside the first 2 ifs, there are only white-space
and new-line changes.
Change-Id: I7e2edb7bfd334b35ee8ab246f733d854bff7e0f7
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
VxWorks has defined variables with same name as in Qt's headers.
Remove these undefines because that has already done in file
src/corelib/kernel/qfunctions_vxworks.h. See related change
f7bd8652ca.
Change-Id: I994ac9d00ca223b9fa955dfcba8ad6c8dcbd0549
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Vxworks DKM mode does not have rand_r function, use function
implementation from qfunctions_vxworks.h/cpp instead.
Change-Id: I8f23c3453ab9f31280eb90f66dd83d7a64ee98c9
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
It was only used in the now removed OpenGL 1.x paint engine.
Change-Id: I2237172de700bfd31ca25279fbed21d601785962
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
For implementing to/fromMacCGImageRef in QtMacExtras.
These do not depend on internal Qt state. The main
reason for exporting them is to keep the implementation
in one place to ease maintenance.
Refactor qt_mac_cg_context to support QImage.
Add qt_mac_toQImage.
Change-Id: Ia9c226ed52d087b2c6b47aa8210ed8f2645b9cf2
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Currently, using QDate::maxJd() in tests will fail. This patch changes
some ints to qint64s to prevent overflows where necessary.
Change-Id: I61ebf8f233411a7544689fd5bfa9c3abee54e933
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTextCodec::codecForHtml currently fails to detect the charset for this
HTML:
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=9,chrome=1">
<title>Test</title>
</head>
This patch makes the detection of charsets more flexible, allowing for
the use of the HTML 5 charset attribute as well more terminator characters
("'", and ">").
I also added a *_data function for the unit tests.
Task-number: QTBUG-5451
Change-Id: I69fe4a04582f0d845cbbe9140a86a950fb7dc861
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
ICC thinks that the return statement is missing:
src/plugins/accessible/widgets/itemviews.cpp(867): error #1011: missing return statement at end of non-void function "QAccessibleTableHeaderCell::parent"
Clearly it's wrong, but the function is overly complex for no good
reason. So just simplify it instead.
Change-Id: Ic63029df18b4712d9864a4dc66b6751b2d4574b7
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
That's what the macro did anyway, except it had an extra "static"
keyword. This allows us now to use Q_ALWAYS_INLINE in non-static
contexts, if we wanted to (e.g., certain template cases).
Change-Id: I899d359f46234e93d1912ef9125080dc84e15c93
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
... like e.g. in QAbstractSocket::connectToHost().
We can set the scheme on the query URL based on well-known ports; even
if the port is not well-known, we can just query the URL anyhow and let
the netstatus API resolve the right proxy for us.
In addition, return early for local schemes like "file" and "qrc".
Task-number: QTBUG-29425
Change-Id: I900f1ecbac6dd380bb8a77470b39de2c07aa7f6e
Reviewed-by: Andrey Leonov <aleonov@rim.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Calling popUpMenuPositioningItem:atLocation:inView: will swallow any
mouse up/released event, if we popup on mouse down/pressed. Since we
cache the button state in QNSView, the safest way seems to be to clear
this button state. Another option would be to send Cocoa mouse up
events for each mouse button, but we prefer to keep things simple.
Change-Id: I7f3f369c45e9f5ed9d2ab693bffd8be4a4596ae6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Change-Id: I491edcae84c149775cf3640626ccff8cbf0d69fe
Reviewed-by: Jon Severinsson <jon@severinsson.net>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The compilers checked here are not supported in Qt 5. Additionally,
the QSharedPointer implementation has similar operators without such
guards, so in reality these compilers may not have worked
with Qt 4.6+ either.
Change-Id: I208f3cde7c689770ae15245a555e3a58b749a8a3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Rename qt_gl_read_framebuffer function to qt_gl_read_frame_buffer in
Qt5OpenGL. This fixes an error when linking statically against both Qt5Gui
and Qt5OpenGL:
Qt5Guid.lib(qopenglframebufferobject.obj) : error LNK2005: "class QImage
__cdecl qt_gl_read_framebuffer(class QSize const &,bool,bool)"
(?qt_gl_read_framebuffer@@YA?AVQImage@@ABVQSize@@_N1@Z) already defined in
Qt5OpenGLd.lib(qgl.obj)
Creating library debug\composition.lib and object debug\composition.exp
The function was duplicated in 6e28e844 .
Change-Id: I9e3b78e0ec5b25264575d563538587b45cd93e86
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
the translation infrastructure is disabled in the bootstrapped tools, so
the translations are wasted.
Change-Id: Ief5d13f09242e03aaf0d4a3d9b1645f9c7a1ab3a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
m_nsWindow is not set for non-toplevel QWindows,
causing devicePixelRatio to always return 1.
Use [m_contentView window] instead.
Change-Id: I6689a70812c9484f103b5e706fe4c1b76406b750
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The index set by setRootIndex is the root of the visible part of the
model. Expanding more than that is not needed.
Change-Id: I0015e313ef046ff63c67338c4f00c37e1aa71ca7
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is the <prefix>/include directory which is independent of the
module and which only has to be used once. As everything uses QtCore,
it is enough to set it only there.
The CI system is a special case, in that it tests things before
installation. Handle that case too.
Change-Id: Idcdf9617e199b7d490cb3553cce07f1f464b3bec
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
updateRubberBand is only called from mouseMoveEvent.
The event is not changed. At the end of the event
we call d->mouseMoveEventHandler which calls
storeMouseEvent. There is no need to call it twice.
Beside that this patch also changes the argument
from QMouseEvent* to const QMouseEvent*. The only
reason it needed to be const was the call to
storeMouseEvent.
Change-Id: I01148a6a8d36e782c4d95a90e36435e20b1681e1
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This commit adds SHA3 support to QCryptographicHash. Two implementations
are provided, one optimised for 32 bit and one for 64 bits. The code has
been written to make it easy to add further implementations, for example
ones using NEON instructions on ARM.
Change-Id: I3be9c45bbd4fcc2771d697e7f7ae74e48a831e8f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
If the GL version is new enough the extension string won't contain
features that have been standardized. So far we only check for FBOs.
Change-Id: Ib29826f378b394894885717c062872581bd5c9f5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
When OpenSSL is built using MSVC then the library names are
named ssleay32.dll and libeay32. However, when OpenSSL is built
with GCC then different library names are used like libssl-10.dll
and libcrypto-10.dll (depending on the version of OpenSSL used)
Change-Id: Icb79a5f82d2a511752bfc904f53a58423ce4b86b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The table is there to know which domains are allowed to set cookies
and which are not. There are more than 2000 new entries since the
list has last been generated.
The split to 64K chunks was made because this is the hard limit for
strings in Visual Studio.
Change-Id: I511aec062af673555e9a69442c055f75bdcd1606
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes a compilation error with GCC 4.7
which was introduced in b5652df775
In function ‘SSL_SESSION* q_SSL_get1_session(const SSL*)’:
invalid conversion from ‘const SSL* {aka const ssl_st*}’ to ‘SSL* {aka ssl_st*}’ [-fpermissive]
Change-Id: I909f7fb4295b2019283a7af66a038d4711e5f7cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
revert() should operate in OnFieldChange edit strategy just as
submit() does. The reason in Qt 4 for excluding OnFieldChange
was that there was no opportunity to revert. The model was
refreshed, causing all changes to be lost. In Qt 5 a failed
edit remains in the cache until user action, which could be
to revert.
Change-Id: Ide021c4f83a53834b7ed81f2abfa3aa49317704d
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
In some cases, the call to handleFileOpen may receive a non local URL.
With previous API, there was no way to pass it to other layers. With
this change, any platform plugin creating this event can directly pass
a URL.
Change-Id: Ibd7299ad6c09527e1db979840bd67726882efb9b
Reviewed-by: Jose Dapena Paz <jdapena@igalia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This lets you write code like format.version() >= qMakePair(3, 2), and
format.setVersion(4, 2) instead of format.setMajorVersion(4);
format.setMinorVersion(2);
Change-Id: Ib052091cc12865ea0d5db52e468ed6cd28f14840
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
A serious problem in the design of qdoc is its
C++ parser. It is an ad hoc recursive descent
parser, which has not kept pace with Qt's use
of the more esoteric aspects of C++. Part of
the problem is that qdoc does not send files
through the preprocessor before processing
them. The bottom line is qdoc needs the C++
parser used in Qt Creator.
But that is a long-term solution. In the short
term, we have to introduce minor hacks like
this one to keep qdoc going until the parser
can be replaced.
The problem in this case is that qdoc doesn't
handle the QT_PREPEND_NAMESPACE macro in
function declarations. The solution is to let
qdoc ignore the macro and just use the macro's
parameter, which is what qdoc wants anyway.
Task-number: QTBUG-28953
Change-Id: I5b9efcc10fa8fb500a44854ee995c2e50e9e16b5
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
DER certificates should not be opened as text files, so we
only pass the QIODevice::Text flag when the format is
QSsl::Pem.
Change-Id: I4bad98023c397b967d5beeec0aaa6c414e06fd9c
Reviewed-by: Richard J. Moore <rich@kde.org>
This introduces a property QMenu::toolTipsVisible with
default value set to 'false'.
Task-number: QTBUG-13663
Task-number: QTBUG-2362
Change-Id: I13079609e2a92adc71b2bbff3dd94494cde1f586
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
We need to check for the Cocoa window class because of the way
currently QDockWidget works.
Change-Id: If69c7327c168518614fe884defa79deb358e260d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The cmd shell inserts magic variables starting with a = into the
environment.
Task-number: QTCREATORBUG-8716
Change-Id: I2f140032aea4fb1d77633c6baf90d7b536e2812a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Breakage introduced by b3820b12fb
Set layered in backing store for frameless windows as was before.
Task-number: QTBUG-29010
Task-number: QTBUG-28531
Change-Id: I13f8f0d58d71b6612430c7048056f672e23b8095
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It was there because of MSVC6 compatibility.
It is not removed, because some code used to do
qMetaTypeId(&myVariable);
This was not a documented feature anyway, so it should not be user
visible.
Change-Id: I55327d7e73e67a6bb741817741d530d5a650291a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There is also one string fix: cursor was twice,
the second one should have been text caret.
These roles follow IAccessible/MSAA as reference.
Change-Id: I39b64fd01376fec9e8d9b743c43a24611a1d9fbd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This change refactors the code for inserting compatibility and
obsolete member pages into a qhp file, detaching it as a new
function and calling it when processing each node.
This ensures that members page, compatibility and obsolete
pages (html files) are added to .QCH files for all processed
nodes that have children or related nodes.
Also renames a variable ('node'->'nodeChildren') to prevent
shadowing.
Task-number: QTBUG-29314
Change-Id: Iccee70ba8768d48b24e68b08651043d0ce4a62a5
Reviewed-by: Martin Smith <martin.smith@digia.com>
Don't assume that all entries in the QLibrary global data refer to
libraries have have been loaded. There are three (not two) ways of
getting entries there:
1) creating a QLibrary
2) using the static QLibrary::resolve
3) via plugins
The unload code was meant to handle the first two cases only: libraries
are still loaded at the end of the execution if the static methods were
called or if QLibrary objects were leaked. It didn't handle the case of
plugins being found by the directory scanner in QFactoryLoader but never
loaded.
Note it's possible that this assertion also happened with leaked
QLibrary.
Change-Id: Idcd7a551f96d8fe500cbca682f8014f5122b7584
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Instead of having separate logic in the OpenGL paint engine.
Change-Id: I9854328f784864e52ba1bbaafe5e1c5dda976231
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
-removed extra qdocconf and files
-"make docs" using QMAKE_DOCS
-installs the documentation in QT_INSTALL_DOCS
-updated title of the manual to "QDoc Manual"
-modified listing of contents in Assistant
Change-Id: I22f93c0903c5e672a0e7efa83bf3f592658be66d
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This part will be improved in Qt 5.1. Currently it just spits
out debug messages for unhandled events.
Change-Id: I22475317ab54a8223d42536e1cee3f93a969e497
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Put all translations into the namespace QDoc and fix warnings
about invalid tr()-usage by removing the free tr()-function
from tr.h. Provide QCoreApplication::translate() for bootstrap
builds.
Change-Id: I2b6931188346f290e80e14b84adff8892d8a860f
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
readData() might be called with a maxSize of 0, regardless of the device
being buffered or not.
Task-number: QTBUG-28968
Change-Id: I666ed4d601341107722c86fe217f617ef748363d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
i.e. make it obvious that they come from Qt.
This helps when debugging and trying to differ user created threads
from Qt threads.
Change-Id: Idd6804246d6676b17cf15de6b644a5be629aa023
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The existing tst_qgetputenv shows that qputenv with an empty value
doesn't lead to the same result on Windows and on Unix, and there was
no way to fully delete an env var on Unix (which is needed for some
env vars where not-set and empty are different, such as TZ,
see `man tzset`).
This is also why qglobal has qEnvironmentVariableIsSet() vs
qEnvironmentVariableIsEmpty(), on the getter side.
Qt4's ifdefs around unsetenv in qapplication_x11.cpp show that this is
needed within Qt too (although this particular startup notification code
has to be re-imported into Qt5 still).
Change-Id: I631c8cddbcf933d4b9008f11aefc59f5a3c7c866
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This improves performance since a network round trip can be avoided.
Change-Id: I1aaff7e48ef9638cb137de0f43942c3a4dd2884a
Initial-patch-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The Intel C++ Composer XE 2013 Update 2 (a.k.a. ICC 13.1) has fixed the
bug of the undefined intrinsics.
Change-Id: If837a0800725d55fed7eff39b9d52c359dabb073
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add the SHA3 reference implementation (public domain) which will be used
in a later commit to add support for SHA3 to QCryptographicHash.
Change-Id: Id0e9d47d628cc94f1d3d2a7696836bc43f6ddf61
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This change increases the size of the DNS cache in QHostInfo from 64
entries to 128. Given the figures in the google chrome performance paper
http://www.igvita.com/posa/high-performance-networking-in-google-chrome/
this should mean we can cache enough entries to handle 4 tabs at once.
Change-Id: I34e32e9e0966473591c59ca5f222623a354650d2
Reviewed-by: Peter Hartmann <phartmann@rim.com>
That resulted in error such as:
qobject_impl.h(82) : error C2078: too many initializers
This should have been tested by tst_QObject::connectManyArguments, but
the test did not work because the detection of defined QMetaType was broken
for const references. That will be fixed in a latter commit.
Task-number: QTBUG-29130
Change-Id: I78514c251358c0e8adf33af724d87ab114230cd3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This macro usage has been removed from most of the Qt 5 code, so
adding a note to be completely removed in Qt 6.
Change-Id: I19a90db78745f3cacbcbf206e8642c7d7c36e04a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is no point in duplicating the information in every module.
host_bins is exported only here as well.
Change-Id: I2f816e1cade9761a2c0d97c7ca1c90293095bfb1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The setting/clearing of WS_EX_LAYERED in the backing store
interfered with the setting/clearing in setWindowOpacity
when combining translucent and non-opaque windows.
Introduce QWindowsWindow::setWindowLayered to handle
it consistently.
Task-number: QTBUG-29010
Task-number: QTBUG-28531
Change-Id: Ib6e2740aae417bdf7b3db9ef7deb646be98df1d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If the high bit in a mask is set, for instance if the mask is
0xff000000, and we shift it to the right by 24 positions, since the mask
was not declared as unsigned we ended up with a mask value of
0xffffffff. We then add 1 to this value and divide by the result,
causing a division by zero crash.
The masks need to be declared unsigned to prevent sign bit extension
when shifting right.
Task-number: QTBUG-29194
Change-Id: I79260344cebfbdd3ea86416a9c734dca76517999
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Previously, selectRow() did not work after INSERTing a new row into a
table with an automatically populated column. It did not work because
the model did not know the primary values for the new row. Newly
inserted rows were therefore not refreshed in OnFieldChange and
OnRowChange edit strategies.
This change provides support for the typical simple case where a single
column is populated by the database and can be retrieved with
QSqlQuery::lastInsertId().
Task-Number: QTBUG-29102
Change-Id: Ibf0f0ac8661185bde57034ddf40c2178bece4778
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Lukas Geyer <lgeyer@gmx.at>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Commit 10ff9de91b introduced the
optimization of ignoring non-changes, but it overshot the mark.
It neglected to consider that QVariant's equality operator does not
compare the null flag. It also failed to consider that setData() has
a useful side effect of setting the generated flag in a column of a
pending INSERT. This is important when the application actually wants
a NULL to be inserted into the column.
Task-number: QTBUG-29217
Change-Id: I1368f7acc21eebfeb5a8d23746fc38f6f30fd395
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
QSqlQueryModel::headerData() relied on virtual indexInQuery() to
detect whether the requested column at row 0 mapped to an index in
the query. This failed when row 0 was a pending insert managed by
QSqlTableModel, and therefore not in the query.
The only thing that matters here is the column.
Task-number: QTBUG-29108
Change-Id: I3e0ae85ba223e444781ec8033386d394bb44f0e8
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
proxy() should be used instead of direct calls to QCommonStyle methods
to allow overriding behavior in QProxyStyle, while keeping fallback
to default behavior.
Change-Id: I338e6b65f4c0ee77c55f03c412f59877fad42b79
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Generator::fullDocumentLocation() adds a parent class name twice into
the generated filename for nested classes, which not correct.
This change fixes the issue and makes documentation for nested classes
work in Qt Creator (qch files).
Task-number: QTBUG-29440
Change-Id: I489800ba09f49dda2befef73634cb2b344be0060
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
This commit partially reverts 07e3bcdc10
The empty macro defition was not supposed to be removed yet.
Change-Id: Ie83b2adbe2328b83c70a70274a401e1e6c74498f
Reviewed-by: David Faure (KDE) <faure@kde.org>
We need a couple of functions here for the Android support.
Change-Id: I50e27277d7e838e277d616dbd3af9be817fb7197
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The error appeared with latest clang as of Feb. 5, 2013.
Apple LLVM version 4.2 (clang-425.0.24) (based on LLVM 3.2svn)
Target: x86_64-apple-darwin12.2.0
Change-Id: I8df8cccc941ac03a7a997bdd5afe095b7b6f65d3
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
simplewidgets.cpp:429: Discarding unconsumed meta data
simplewidgets.cpp:535: Discarding unconsumed meta data
Change-Id: Icd9686392781eb1faa7868dc4c92d26fa44c4f94
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
linuxaccessibility/bridge.cpp:169: tr() cannot be called without
context
Change-Id: Ib6bd4db7c4759818ccba8adff73617af7331f318
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
It may be useful to know which named capturing groups are defined
in an regular expression, and for each of them, what's the
corresponding index. This commit adds the needed method
to QRegularExpression.
Note that extracting the information doesn't happen while holding
the mutex in the private -- pcre_fullinfo just reads information
from the compiled pattern, so that's thread-safe.
Task-number: QTBUG-29079
Change-Id: I50c00ee860f06427c2e6ea10417d5c0733cc8303
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QPixmapCache size default value is always 10 Mb
since change I2ac33765
Change-Id: I28c99433948b07e9c84d0afda7aa5a8f49d2cd18
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Qt dereferences QGuiApplication::primaryScreen() inside,
for example, QColormapPrivate::initialize().
libscreen always returns at least one display, even it it's
not connected, so lets not ignore it if it's primary.
Change-Id: I2f14a187c979ca0c7ad39149ceb0b2b7e61e9ba6
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
QMacStyle::subElementRect could crash if SE_LineEditContents was used
without providing a widget pointer.
Task-number: QTBUG-27033
Change-Id: I15ef07ae1310be4257a8480d392f98dbf02168d3
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
The presence of the sentence "If this is the last QSqlDatabase object
that uses a certain database connection, the database connection is
automatically closed" is misleading, whether or not the statement is
true. It is about an internal detail of QSqlDatabase's implementation.
As such it is not appropriate for user documentation. The user should be
focused on how to use addDatabase(), cloneDatabase() and removeDatabase()
correctly.
Task-number: QTBUG-29481
Change-Id: I0c39584be260e13340834c34098368fcce4a7419
Reviewed-by: Florian Paul Schmidt <mista.tapas@gmx.net>
Reviewed-by: Sune Vuorela <sune@vuorela.dk>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
In windows platform, Qt5 will not show the system default shortcut menu
when the user right click in the window's caption. This is a regression
from Qt4.
This patch will let DefWindowProc() to handle the message WM_CONTEXTMENU
if the mouse pointer is in the non-client area of the window. Thus the
default Windows shortcut menu will show up.
Change-Id: I88638ad1d4f0e73b088204b83c3f7ec0fe2033f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The new QThread documentation now really discourage to reimplement
QThread. But in fact, there are many cases where it is perfectly fine.
And the example given is even a case where using worker object is wrong.
The examle even contains a leak since the thread will never stop and
will even leak.
This changes put back some sentences from before commit
d4ad9dbbf9.
The sample code has been re-writen. Notice how reimpementing run takes
less lines of code, less runtime overhead, no leaks, and also is more
complete than the previous example.
Change-Id: I6cb80826e917dd5ce442ccad2572ec692ccb25ab
Reviewed-by: Andre Somers <andre@familiesomers.nl>
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
Reviewed-by: Debao Zhang <hello@debao.me>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is better than getting a regular compiler error without
knowing where min was previously defined.
Change-Id: I5a86599cdf76a9a8d87a51e119543206d9f835c1
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ICC is right: this function will never be called. But we didn't want it called anyway. Just make it be something non-void.
qdbuspendingreply.h(185): error #597: "QDBusPendingReply<T1, T2, T3, T4, T5, T6, T7, T8>::operator void() const [with T1=void, T2=void, T3=void, T4=void, T5=void, T6=void, T7=void, T8=void]" will not be called for implicit or explicit conversions
Change-Id: I5e067bd03aafc6d6772cc1e0f8f8ae8bfa1712d7
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The variable is present only for completeness in qurl.cpp.
Change-Id: I68d7ca4cd52c14fbf8154e510737f7428d8e9679
Reviewed-by: David Faure (KDE) <faure@kde.org>
During exit, libraries are unloaded and global destructors are run. If
we call dlclose(3) from inside the global destructors, we might be
telling libdl to unload a module it has already unloaded.
I cannot reproduce the issue on my Fedora 17 machine with glibc 2.15,
but it could be reliably be reproduced on an Ubuntu 11.10. The assertion
is identical to the one reported upstream at
http://sourceware.org/bugzilla/show_bug.cgi?id=11941 (see better
explanation at https://bugzilla.novell.com/show_bug.cgi?id=622977). I
cannot find any evidence in glibc's source code that the bug has been
fixed.
Change-Id: I97745f89e8c5481196e645dada8762d607a9fb2c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The previous solution was a global static, which got deleted at the end
of the execution of the application or at QtCore unload, whichever came
first. Unfortunately, the end of the execution often came first, which
is inconvenient: it means the global was deleted before all atexit
functions were run, including some QLibrary destructors.
Consequently, some QLibrary destructors did not reach the global data
and were thus unable to unload their libraries or delete their data
properly. The previous solution leaked.
This solution instead uses a Q_DESTRUCTOR_FUNCTION, which makes a
requirement to destroy only at QtCore unload time. Thus, we're sure that
all references have been dropped.
Additionally, during the cleanup, do try to unload the libraries that
have a single reference count left. That means either a QLibrary that
was destroyed without unload(), or a use of the static QLibrary::resolve
functions.
Change-Id: I12e0943b0c6edc27390c103b368d1b04bfe7e302
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Since isSignalConnected is meant to be used in performance critical
code, and that QMetaMethod::fromSignal is relatively slow, it is better
to have it a a static variable in the code sample, as a good
recommendation on how to use it.
Since QMetaMethod::fromSignal should not change during the life of the
program, it should be safe. Also, if different threads run at the same
time, both should lead to the same result.
Change-Id: Ib6113d11ca93f216bc3a92aea4eaa4da6a4151ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no need to do any kind of work with emitting signals if
signals are blocked.
Change-Id: Ic352ba157fd89bbd36c650edd809a2ea91bcdd5f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Just like other functions this function should emit expanded and
collapsed.
A part of fixing
Task-number: QTBUG-8176
Change-Id: I6d801f61e6f0cb8836634cc52f0be2b610f6c728
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In mingw.org, basetyps.h contains
#define interface _COM_interface
which clashes with function parameter names in qdbusmessage.h.
Although there is no clash when building qtbase itself, the clash
makes building qttools 5.0.1 fail. Presumably this could also affect
other applications.
Taken from 2cc9a9a51d6742708b1ea41c7338755e2a0ee9e9 which solves the
same problem in another header.
Change-Id: I802d5c673b544fb3a17e9273030876928faa5c46
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only on Windows do we use wchar_t messages.
Change-Id: I9672371aa001effc755b32f9d7c83ada8464394f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
This is useful when the widget is focused by default, and also gives
another opportunity to the user to read the message before typing,
removing the need for workarounds like clicking in another text entry to
bring back the placeholder message.
Change-Id: I4a2981a6656a87934b5c8ed4a8a2dc13b748c94d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Move the QXXResult classes inheriting the private class
QSqlCachedResult from header into the source files for
SQLite, SQLite2, Interbase/Firebird and TDS/Sybase and
Oracle.
Task-number: QTBUG-28088
Change-Id: Ia16d30e442e313c8165282b8a3f012fd95d96759
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
GCC 4.7 has new builtins in x86intrin.h that ICC 13 does not (yet)
understand, causing compilation errors.
/usr/lib/gcc/x86_64-redhat-linux/4.7.2/include/adxintrin.h(36): error: identifier "__builtin_ia32_addcarryx_u32" is undefined
Change-Id: I1845ccc3bf3ac15aef063bc3f998c5839fa51866
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This macro is useless from Qt 5.1 on, so:
- Remove comment about using QT_BEGIN_NAMESPACE after QT_BEGIN_HEADER
- There is no need to blacklist these in qt-cpp-ignore.qdocconf
Change-Id: I2c3ceb3d77d294a606b87f7486071a2350b3d42f
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The QPA plugin assumes in several places that we have at least
one QScreen.
Even if patching the plugin to support 0 screens, Qt itself crashes
when dereferencing a null paint device while synching the backing
store.
Change-Id: I2ac504a447aff811d6c07ab857340a3433557cdc
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This is supposed to workaround a race condition in the underlying
netstatus API: Sometimes we get an event that the Wifi interface
changed, but it is not up, e.g. no gateway (yet). In that case we need
to check back (currently: 300 ms) whether the interface has come
up or not.
This commit can be reverted again once the race condition in the
netstatus API has been resolved.
Task-number: QTBUG-29421
Change-Id: I215ce8aae4848b6e942e77c6425adba90e9cc526
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
When we call call collapase we emit collapsed. Therefore it should
also be emitted on collapseAll()
This partly solves:
Task-number: QTBUG-8176
Change-Id: I20c1388fcbbb60d12debb4a0b3b0d9fed41e2563
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When we call QTreeView::expand expanded is emitted.
For the same reason we should emit expanded on expandAll()
This partly solves:
Task-number: QTBUG-8176
Change-Id: Ie85e724eec50980c68f626ec47dec5c1e08cc085
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Revert to the pre highdpi-patch behaviour.
Before, both physical and logical DPI would be based
on the dpmx/dpmy variables, which could be changed
with setDotsPerMeter(). The highdpi patch introduced
separate ldpmx/ldpmy variables, which were not
changed by setDotsPerMeter().
This broke when loading images: setDotsPerMeter
would be called but the logical dpi would not change.
Remove ldpmx/ldpmy. Keep scaling the physical dpi
by the devicePixelRatio, which will be set to 1 by
default.
Task-number: QTBUG-29187
Change-Id: I0d6f5f3b8efae5fb1adc0a50b22a5da78324a282
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Use a normal instead of a HWND_MESSAGE-window since the latter
do not receive the "TaskbarCreated" message. Provide an invokable
slot in the native interface to register a window class for that
purpose.
Task-number: QTBUG-29160
Change-Id: Ic25222d08d21867f7d882a9e19d8aaf50f3f47cf
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QThread::idealThreadCount returns now the number of cores.
Change-Id: Idc23fc3c257165f6a63c6a7686a57a4fe76f6413
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a sourceModel resets, it's roleNames might have changed. This
is most likely the case if sourceModel itself is also a proxy model
of which the sourceModel was changed.
Task-number: QTBUG-28982
Change-Id: I102788f2c9bf97b4002b350673f9219e32e7a052
Reviewed-by: Nils Jeisecke <jeisecke@saltation.de>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Check that the NSWindow pointer is valid before
calling backingScaleFactor.
Change-Id: Ia23cbb4058b7d0fece008bc437f8bfec6c0ddebe
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This was part of Qt 4.8, but Qt 5.0 was branched before that, so
the commit was lost.
Change-Id: I2a2ab3c75a0943ac734d588ebd74bc158dd6aaaf
Reviewed-by: Nils Jeisecke <jeisecke@saltation.de>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QtTestLib and QTestLib don't exist. The proper name is "QtTest" (code)
or "Qt Test" (English)
http://qt-project.org/wiki/Spelling_Module_Names_in_Qt_Documentationhttp://lists.qt-project.org/pipermail/interest/2012-December/005221.html
Files paths in qttestlib.qdocconf can't be changed easily however, as it
breaks things. So, they're left as they are.
Change-Id: Ifbc44ea858c453bedad8cd7723f847e67fc7a85a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Change-Id: Ie621f562401b703077a2b304ad6d8445efc76642
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Change-Id: Iaa176fc6152162c91a3e3bd373a235883001975c
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The name field string was not set in native dialog when one was present.
Task-number: QTBUG-28342
Change-Id: I243b491c8bc094d45f25be96b3bde8eccbb65acd
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The default value for NSWindow::setRestorable: is true, it means
application will have some information for each window stored.
After a crash happened and application relaunched, the application
tries to restore those windows from the broken file. And then the
"Retore Windows" will pop up. There is no workaround for
application users or develoeprs. What they can do is to manually
remove the the saved application state file for the applicaiton.
To avoid that, better to switch it off.
Task-number: QTBUG-28281
Change-Id: I8ce3cd94f5ae81d7877a346743ca4e0e188baa02
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
It can be used to determine whether expand() should really expand.
Change-Id: If79d8c295a4ca1356e60051682b227524a065126
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Useful for running auto-tests without popping up a bunch of windows in
the windowing system. Thus they can be run in the background and even in
parallel without focus issues.
Change-Id: I8b14c6de258b41225480a0af5a2a9553663bc2b7
Reviewed-by: Jason McDonald <macadder1@gmail.com>
If Qt build without BMP support, we need exclude this format
from output of QImageWriter::supportedImageFormats() and
QImageReader::supportedImageFormats() methods.
Task-number: QTBUG-27028
Change-Id: I44e8956247066c0836b1ff7bf9a1f356fe568af1
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
When Qt build statically result of
QImageReader::supportedImageFormats() must contain 'jpeg' and
'jpg' if JPEG support enabled.
Task-number: QTBUG-29222
Change-Id: I94d731c2d1e2ede148e2e5261a310a840a1d5523
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Qt::UniqueConnection is a flag, not a standalone connection type.
Change-Id: Ibafb7306f3d60753a4381897488131e6484d368f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QtWebProcess, for example, doesn't create any QWindow, so it doesn't
need any root window.
This fixes Webkit2 rendering on QNX.
Change-Id: I1d4c0dd20869798ba2bcd15f9d96e5fca4beb48e
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The macro was made empty in ba3dc5f3b5
and is no longer necessary or used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2013-January/009284.html
Change-Id: Id2bb2e2cabde059305d4af5f12593344ba30f001
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
Make them use the monotonic clock if that's available. On Mac, the
monotonic clock is not available -- Qt fakes monotonic support by using
the Mach timebase -- so we need to use gettimeofday.
Change-Id: Iaea0b0c0de1b4802780e2476dc3643b703db392c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add function to move back data to the stack.
Change-Id: Ic78a368459bce68629e29602e4eeae2e1afe398b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's possible that different database libraries share dependencies.
We need to keep their link lists intact here so that QtSql's .prl and
.pc files will have them in the right order. Particularly important
when building the drivers into QtSql and using static linking.
Change-Id: Id371b127099f2790fe7cccd0c7059607600f447d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
-copied snippet and input files from Qt Widgets.
-adapted new paths in the resource-system.qdoc file.
-removed the old path entry in qdocconf.
Task-number: QTBUG-29101
Change-Id: Ieeb118106756a1a39890ab219294de18f437c56c
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
Fix 19 counts of "Can't link to 'default-constructed value'"
warnings.
There was only one link to "default-constructed values", so the
cleanest solution was to change the keyword.
Also included a related typo fix.
Change-Id: I84b47743ecb72a1b2731ef65080fa1e630d478a4
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Snippet not showing because qdoc read wrong snippet file.
Due to 2 files having the same name.
One was renamed: rsslisting.cpp --> listing.cpp
Task-number: QTBUG-29101
Change-Id: I62b7eee6f2860613ee90538d8dea006b89000317
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Make it possible to show a modal dialog by just calling show().
Start an idle timer, which will start the dialog thread.
This timer is stopped in exec().
Change-Id: I8f7352bf577b09a19be7df4484e0077bb1aa46ab
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
According to the documentation recently added mime
type converters should take precedence over previously
added converters. Make it so.
Task-number: QTBUG-25951
Change-Id: Ic23ca7cbb93a98711d762b1ef0e0dd2aa1ceaeda
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This avoids an extra division by 1000 when getting the current time.
This can't overflow, under normal circumstances, even on 32-bit: when
adding two values less than 1 billion, the result is less than 2
billion, which is less than 2^31.
Change-Id: I6f8e1aadfe2fcf6ac8da584eab4c1e61aee51cbb
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We now use the updated logic for #including the correct GL headers
already implemented in QtGui.
This is needed to fix compilation of QtOpenGL on CentOS 5.8 and
RHEL.
Change-Id: Ifdedd13885566016073538f33aa6daf5902c3497
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This allows us to then use the up-to-date qopenglext.h header on Linux
too. Some distro's are not yet shipping OpenGL 4.x compatible headers.
This fixes compilation of Qt on CentOS 5.8 and RHEL
Change-Id: Ia8022e0aaf215dac7ea2a23dc82c3ac117d9fd53
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Add a note in QDesktopServices class reference about storageLocation()
and displayName() functions being deprecated since Qt 5.
Task-number: QTBUG-27869
Change-Id: I739771fef15534823071beabd62aa7b4e7b34cc0
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
A itemview item with its flags set to Qt::NoItemFlags is considered
disabled, and therefore should not cause the activated signal
to be emitted.
Task-number: QTBUG-20490
Change-Id: If824505c46f4fcadb9265ad6d1e9337f0cee32cf
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The d->buffer array was 2x the required size and every other void*
actually stored a DBINT (int) indicating the binding status of the
null. The qIsNull function checked that value, but got the warning
printed.
Instead, let's just do the right thing and have a struct for each
column. Solves the problem more neatly.
Change-Id: I2daaf05c876da7e0e13fb983c58916d946518846
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The writer delegate used by QJsonDocument to produce a Json QByteArray
supports generating a human readable Json (with spaces and carriage
returns that reflect the Json structure) and a less human readable (no
spaces nor carriage returns) but more compact Json.
The method toJson() was extended with a format argument to support
the compact Json generation.
Task-number: QTBUG-28815
Change-Id: I8d13849ab9ab6ed7c645011260251dc14a8629d2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Debao Zhang <hello@debao.me>
Within qcocoahelpers, make function cocoaButton2QtButton() handle
all button numbers. Within qnsview, call the function in several
places (eliminating duplicate, inefficient code).
Task-number: QTBUG-28567
Change-Id: Ibae2ae4e8a881b825a8862afb82aa80437751111
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Rick Stockton <rickstockton@reno-computerhelp.com>
Change-Id: Ic2bee5b5c20505a866656575b5f5fb853cea4aae
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
A QWidget that can embed a QWindow. This can be used
to embed a QWindow/QOpenGLContext based window or a
full QQuickView.
Change-Id: I8415b5ae38562fc00b46150fa70b56fd9b19a80c
Reviewed-by: Jørgen Lind <jorgen.lind@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Corrected path for snippet command
Now refers to doc\snippets
Removed trailing space
Moved macmaindow.mm to src/widgets/doc/snippets
Task-number: QTBUG-29101
Change-Id: If60c31909b2f5efad10ac8b735164a80522dcf62
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reference to section 1, which does not exist.
Task-number: QTBUG-29101
Change-Id: Ifd5ac58080033ea1d3f0a587f48f9510f24e75b1
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Add more testing.
This uncovers that currently the QDesktopScreenWidget
shows up as child of the app. Fixed by not creating
QAccessibleInterfaces for QDesktopScreenWidget.
Also don't crash in indexOfChild when called with 0.
Change-Id: I9fb1e47e8f1f33189e6125f56f274a7b94ecd0dd
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
If the window or widget is a popup, ignore the hint. The
intention of the flag should be to show main windows etc in
fullscreen, and not all kinds of popups and tooltips. The user can always
call showFullscreen explicit when necessary.
Change-Id: Ie150b6c6d7ca6c9344a9097544a7edbc4bd10df2
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Return value of the QFile::decodeName(qgetenv("HOME")); is never null
if HOME environment variable is not set. So need to check the return
value using isEmpty() instead.
Task-number: QTBUG-28912
Change-Id: Ic57b1978d63e99b056cde35ca8cb9d2a07ff8ce8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Improving performance when making texture from QImage, this commit
makes it possible to skip qgl_byteSwapImage. If gl_FragColor of fragment
shader is properly configured, qgl_byteSwapImage is not required.
Ex) gl_FragColor = texture2D(texture, textureCoord).bgra;
Change-Id: If1f2d7dc1fc1c4e583cc3f38dec95a9d29417cd2
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Change-Id: I96b6e96539a84a5919992afbaee757fa080b7ae0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The CoreText font-engine is not able to produce glyphs with a negative
scale (flipped). We need to report this fact back to the raster paint
engine, so that it can fall back to painter-path based text drawing.
For the GL engine this is not an issue, as the engine is able to handle
the flipping itself, while still using a non-flipped glyph-cache.
Task-number: QTBUG-29284
Change-Id: I3c24cee091786faae8a5c5dd756d208163330bfc
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
We can still assume it when pulling out the scale of the glyph cache,
since we limit it to scaling, but when computing the scale from the
current matrix we have to decompose it.
We always use a positive scale in the glyph-cache, and let the drawing
code take care of any flipping of the coordinates.
Change-Id: Ie3c4f2d91008a9be8f89bef29c15d80b23fb8a82
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This is done by using locale-independent QByteArray::setNum() instead
of qvsnprintf() for printing doubles.
Task-number: QTBUG-24949
Change-Id: I68cb192417d9a94f72e039c40f647b4a6826a3b7
Reviewed-by: John Layt <jlayt@kde.org>
This happened in cases when QDrag choose not to use a
pixmap to represent data in a drag and drop operation.
The chain that leads to QPainter errors begins in
QBasicDrag::startDrag() where we call setPixmap() with
Null pixmap, which later calls updateGeometry() which
leads to calling render() before the backing store
has been resized.
Task-number: QTBUG-29283
Change-Id: I2145159d3f23dbde2cba2ca9aa1788e222aba02a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When a filename was specified as part of the start up directory then it
should ensure this is put in the filename lineedit in the native
filedialog.
Change-Id: I2b190933d46553908b5bcf17506cb2a95fb1f982
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Though no one is supposed to include them directly, it's a good idea
to ensure that they are tested too. They're only included from the
master header when QT_GUI_LIB and QT_WIDGETS_LIB are #defined.
Change-Id: Ie84bb6fd4c18b5b51ab35463f9082feaa0693c97
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
A glitch in QGraphicsItem's logic made it update the focusScopeItem
pointer, but fail to notify the change to QDeclarativeItem through the
d_ptr->focusScopeItemChange() virtual function, hindering
QDeclarativeItem from emitting focusChanged() correctly for focus
scopes that do not have focus.
Two lines were moved, and a comment updated to reflect the reason
why the "return" is needed at this point. It's clear that the
calls to focusScopeItemChange() are unrelated to the return.
Task-number: QTBUG-29260
Change-Id: I12ba9161b16d34c3689401a92c86d2047989f7bd
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Alan Alpert <aalpert@rim.com>
make sure we keep track of when we can load root certs and when we
cannot (we cannot when the developer set the certs explicitly). This is
implemented the same way for QSslSocket already, and needs to be
duplicated because we have 2 methods for setting CA certificates: one in
QSslSocket and one in QSslConfiguration.
In addition, adapt the auto test which checks whether setting a default
QSslConfiguration works: There is no way to set on demand loading
through the API, so it should be enabled by default.
Task-number: QTBUG-29103
Change-Id: I5146128aaa385dfcc0ad1e0ef81a92d9350ec5f2
Reviewed-by: Richard J. Moore <rich@kde.org>
Introduces the methods QImageReader::supportedMimeTypes and
QImageWriter::supportedMimeTypes which corresponds to the similar
supportedImageFormats methods, except they return lists of MIME types.
Task-number: QTBUG-28177
Change-Id: Ibb0e264a12eaf972a8bfd6bd891dcd9f89efd085
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This allows easy unsetting of the variable in a shell like:
QT_FATAL_WARNINGS= progname
Change-Id: Ie9cfb6ebfd4931de1c90af68bfeeae1e9f3d4b9d
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Required to prevent crashes and incorrect behavior in
https://codereview.qt-project.org/#change,44201
Change-Id: If6025429caabafd150cdd44fec152ff584232220
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We don't need to stat(2) the file to check if it exists before
creating it. We're about to open(2) with O_CREAT|O_EXCL, which will
not recreate it if it existed.
Change-Id: I2d2176054e7776a32a4520832ee104b9c4ccf748
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This allows shared texture uploads in a background thread.
Change-Id: Ib390243bc9dfabd6c579dff9b74e7f44211739d3
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
As Gatis found out the copy text bug is caused by the xcb plugin's
handleEnterNotifyEvent() receiving an event with a seemingly random
"time" member. That is however not due to a bug in the X server but
rather due to a missing break statement in the event dispatching in
qxcbconnection.cpp, causing an xcb_client_message_event_t to be treated
as an xcb_enter_notify_event_t, and thus an xcb_window_t to be treated
as an xcb_timestamp_t.
The other xcb_enter_notify_event_t values would of course also be
complete garbage.
Task-number: QTCREATORBUG-8476
Task-number: QTBUG-28398
Change-Id: Id8c09a6682f78b646a0d1d27b0650248bbfa1046
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
Keeping accessibility and only disabling the bridge will
enable more builds to work.
Warning about disabling accessibility disabled is needed
because in QStyle it is used to discover semantics about widgets
(if a toolbutton is in a toolbar).
Change-Id: Iae4e6ab63479743bdd70cba4b1954ec7cf3f88e9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
VxWorks has defined variables with same name as in Qt's headers.
Undefine those variables to avoid naming conflict.
Change-Id: Ia8ca04a66acece683cd6c7f71df7e5a2800ec98d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
In VxWorks qfunctions_vxworks.h file includes correct time
related headers and it is included already at file
qplatformdefs.h for all mkspecs targets.
Change-Id: I8677eef8c79cebb445d89203284f3af27abbdd7f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
VxWorks compiler fails to compile *.c file with C99 style comments on it
Change-Id: Ib5c5ff14006c17f9392b77363232b8b7cc112d34
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
In VxWorks set default values for scheduling priority to use
SCHED_FIFO_HIGH_PRI and SCHED_FIFO_LOW_PRI defines for other scheduling
policies than SCHED_RR or SCHED_FIFO.
Change-Id: If78b84cd9ef94d7712206e9442e96cdba727610f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
VxWorks does not support to globally lock and unlock the scheduler from
process. In kernel mode (DKM) above functions disable preemption from
requested task and such functionality does not exist for process.
Change-Id: Id41eab4c1973e4181e82539d08707659e0780f99
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
VxWorks does not have concept of users and therefore has no function
getpwnam. Use QDir::homePath() which returns actually QDir::rootPath()
if there is no HOME env variable set.
Change-Id: I15fe15862c4491b56cfa13bbdb218ef00dfd1f15
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
VxWorks has no concepts of users and groups, therefore no such functions
exists on VxWorks. Use stub functions from qfunctions_vxworks.h for
those, so we don't need to make major source code changes.
Change-Id: Iaad80ec18441e3d3e9c0f96e92ccc3766b27d976
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Vxworks does not have gettimeofday function, use function
implementation from qfunctions_vxworks.h/cpp instead.
Change-Id: Iad2a71c8484ba00dd9406706b1c136297260de4b
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Shared libraries cannot be used in kernel mode (DKM), only at process
mode (RTP).
Change-Id: I8cecc12461aa4417b16577db3bc9cd85a1aa7efa
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
VxWorks simulator (VxSim) maps SDK rootdir usable as normal directory.
Mapped directory name is either host: or <hostname>: and can be used
without prepending prefix containing colon. Strip prepending string and
colon to get valid native path to host SDK rootdir running VxSim.
Change-Id: I9d2829e32431c2d50fefe55c93780cd37165e565
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The uniprocessor taskIdCurrent global variable (declared in taskLib.h)
does not exist in VxWorks SMP, because of concurrent execution on
multiple CPUs. Any uniprocessor code that reads taskIdCurrent should
make calls to taskIdSelf() instead.
Change-Id: I4e0efef32297f339d6121c7d4bca3820e0fc9294
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Check if _WRS_KERNEL is defined so we are compiling for DKM mode.
Change-Id: I15801b0575d3fe6e543f81a177fd01d015d9085f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
VxWorks don't have gettimeofday function so we always use the one
implemented in Qt. VxWorks DIAB compiler is not supported building Qt
for VxWorks 6.9.2. Anyone using older VxWorks should also not be
affected so use new defines VXWORKS_DKM and VXWORKS_RTP for VxWorks
version 6.9.2 onward.
Change-Id: I2e9546a101256ea0557b65163b40cd0f28be8519
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Qt does not print debugging in released versions. We print warnings in
case of error in using the API, but that's not the case here.
Change-Id: I14d54be5d6a1d4e1f147afd091ba850670972cdf
Reviewed-by: David Faure (KDE) <faure@kde.org>
This replaces the implementation from ac9ab9703f.
If the number of active children drops to zero, we know we can simply
delete the vector of children. We know none that might be there are
active.
If the number is not zero, but is considerably smaller than the vector
size, we can shrink the vector by reordering the elements, skipping the
inactive ones.
We use qMove, which expands to std::move on C++11, but a regular copy on
C++98.
Change-Id: I2e74446081f91fbd698425b08910fbda4746d673
Reviewed-by: David Faure (KDE) <faure@kde.org>
The new member variable activeChildren shall contain the number of
direct children that are active. This number differs from
children.count() because the vector may contain empty entries that
haven't been garbage-collected yet (obj == NULL and activeChildren ==
0).
When this count drops to zero, we know we can simply erase the vector of
children.
Change-Id: Ia20604d3fac852ea4a6e8862d934fbb936fa5e18
Reviewed-by: David Faure (KDE) <faure@kde.org>
The current implementation is a loop. We need it to be recursive so that
we can execute more operations when unwinding. This will be necessary
in the next commit.
Change-Id: Ia3c98fed0719cede0a0d92d3e343cf016ec7baf2
Reviewed-by: David Faure (KDE) <faure@kde.org>
It helps in valgrinding applications. It's the difference between:
==17609== Address 0x38 is not stack'd, malloc'd or (recently) free'd
and
==19789== Address 0x598f478 is 56 bytes inside a block of size 112 free'd
==19789== at 0x4A0736C: operator delete(void*) (vg_replace_malloc.c:480)
==19789== by 0x53A77CD: QObjectPrivate::~QObjectPrivate() (qobject.cpp:239)
==19789== by 0x53B4EB5: QScopedPointerDeleter<QObjectData>::cleanup(QObjectData*) (qscopedpointer.h:63)
==19789== by 0x53B3980: QScopedPointer<QObjectData, QScopedPointerDeleter<QObjectData> >::~QScopedPointer() (qscopedpointer.h:99)
==19789== by 0x53A8EEC: QObject::~QObject() (qobject.cpp:750)
Change-Id: If42107c94401a96c05caa511442d6bd010fd4e29
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Unlike the previous implementation, this implementation is locked:
only one initialisation is ever run at the same time. It is
exception-safe, meaning that a throwing constructor will restart the
process.
Also, start using the thread-safe behaviour that GCC has offered for a
long time and C++11 requires.
Change-Id: I20db44f57d258923df64c0051358fd0d9a5ccd51
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The aliases for the TIS-620 codec were not available before loading it.
This led to the following intermittent failure:
QWARN : tst_QTextCodec::threadSafety() WARNING "MS874" not found?
Change-Id: I8ed037d3238c04e1d35ed49e833ac01b7501d3e8
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Only QStringList was handled before, now any QList is handled.
A specialization for QStringList is still needed though, due to the way
template matching works.
Example with QList<int>. Before:
FAIL! : tst_QTextCodec::threadSafety() Compared values are not the same
Loc: [../tst_qtextcodec.cpp(2057)]
After:
FAIL! : tst_QTextCodec::threadSafety() Compared lists differ at index 0.
Actual (res2.toList()): '0'
Expected (mibList): '3'
Loc: [../tst_qtextcodec.cpp(2057)]
Change-Id: If0fdec3236ddb78a679ee549aba569ef5571c395
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Currently, there is no concept of not having a cursor set on
a Window. Qt::ArrowCursor is always set instead. This causes
bugs when native child widgets are involved, for example setting
a cursor on the native widget's parent no longer works since
the child's Qt::ArrowCursor applies.
Introduce QWindowPrivate::hasCursor tracking whether a cursor
has been explicitly set and clear in QWindow::unsetCursor().
Handle 0 in QPlatformCursor::changeCursor() to mean
"unsetCursor()":
- Windows: Introduce default constructor for QWindowsWindowCursor
meaning "0". Search for applicable parent cursor in applyCursor.
- XCB: No big changes required, set XCB_CURSOR_NONE for no cursor.
- Other platforms: Assume Qt::ArrowCursor when cursor = 0 is
passed for now.
Task-number: QTBUG-28879
Change-Id: Id82722592f3cd5fe577a5b64dcc600c85cfea484
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
- Correct modality check.
- Allow for properties to be set if there is no native dialog.
- Make dialog thread for non-modal call back into dialog helper
for exec().
- Introduce QWindowsFileDialogSharedData to contain data to be
cached while no native dialog exists and to be updated by the
change notifications of the IFileDialogEvent interface to avoid
querying the dialog results after the dialog has closed. Reduce
virtual methods of QWindowsNativeFileDialogBase accordingly.
This also fixes a bug in the previous implementation causing
the directory not to reported back since the native API would
not return the directory after closing the dialog.
- Support nonmodal native dialogs when constructed on a QQuickWindow.
- Delete native dialogs after exec as QtQuick keeps the
dialog instances around.
Change-Id: Id1169d6657d9476afe12fb9909c36cbd03aa2a40
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
There is an assumption that the interface returned from iface->parent()
would have iface as one of its children (thus,
parent->indexOfChild(iface)
should always return an integer != -1, indicating that it is a child.
This is a good assumption, otherwise an hierarchy would be presented
differently depending on how it is traversed.
However, a QMenu created like this:
QMenu *menu = new QMenu("weird parent", mainWindow);
mainWindow->menuBar()->addMenu(menu);
will have a different ancestor sequence than a menu created like this:
mainWindow->menuBar()->addMenu("ok parent");
This is because it will walk up the QObject hierarchy.
This patch tries to deal with that by looking at which widgets the
action of the menu is associated with before determining which should
be the accessible parent.
Change-Id: I00dad8a94463f772d7b1f5d66fdb36b2e8d3aea2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Instead of always using a non-transformed glyph-cache we now allow a scaled
glyph-cache so that retina-screens can take advantage of this. We take
the cache's scale into account when positioning and drawing the glyphs
so that the scale is not applied twice.
Change-Id: Ia927656f0070df61e78da76e97d2c49de4d856d9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The mingw headers lack the IPV6_V6ONLY define, depending where you get
them from. Currently the headers provided by mingw-builds are more
complete than those from mingw.org itself.
I have removed the compile time check, defined the macro if it is
undefined, and it should be just a runtime check for if you are running
on windows XP you get no dual stack binding.
Task-number: QTBUG-28787
Task-number: QTBUG-28971
Task-number: QTBUG-28972
Change-Id: Iafadbb55d367c44ba9f812a24115e65591701b54
Reviewed-by: Ilya Sidorov
Reviewed-by: Peter Hartmann <phartmann@rim.com>
(cherry picked from commit d3c4296198)
Depending on the implementation updating an input method can be
expensive and various widgets will at times call setInputMethodHints
with unchanged hints. QGraphicsView being a notable offender due to
the complexity of the circumstances in which the hints can change.
Skipping the update here ensures the input method isn't updated
unnecessarily for all widgets.
Task-number: QTBUG-19854
Change-Id: I36ae35585ee20a4e01ca0d62c71e896dbdb51a3f
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
For use with public API in QtMacExtras.
This goes into Qt stable: Fix for new functionality,
and close a feature regression against Qt 4.
Change-Id: I555fdff3ddb39336ccd72f9711d465f1c18c6b45
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The pcre(3) man page says that the 4th argument of pcre_fullinfo,
when requesting PCRE_INFO_OPTIONS, should point to an unsigned
long int variable.
Change-Id: I72cd5ab208687715329566556c5f279db57f7872
Reviewed-by: Richard J. Moore <rich@kde.org>
These classes moved as well, but were missed in commit c07408e2. This
fixes uic generating invalid code if any of these classes are used in
an .ui file.
Change-Id: I0359157f540a5f4979cca781169e5a9b2a0afad7
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This associates properties with member variables and
avoids writing getter and setter methods manually.
The metaCall() method directly accesses the member variable,
so additional method calls can be avoided.
The metaCall() setter code also supports NOTIFY signals,
which means the according signal is emitted when the property
gets written.
Task-number: QTBUG-16852
Change-Id: I88a1f237ea53a1e9cf65fc9ef2e207718eb8b6c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Since we have to add the filters one by one to the Mac file dialog it
was finding the one that would match the filter by comparing the start
of the filter string. However it would continue to check the start of
other filters even if it had already found the one it should be using.
Now it uses either an exact match or the first one that it matches the
start of.
Change-Id: Ie6441acd48e45ec9c712afc12a2ea47755835bb3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
If the sheet is not ended then subseqent calls to show a sheet will not
work correctly.
Change-Id: Ib8a43a1c96a3dadff196c433e822f7579ad87b8b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Some times a platform might want to exclude certain configs, for example
based on EGL_NATIVE_VISUAL_ID. This patch introduces a new
QEglConfigChooser class which has a virtual filterConfig() function
which can be re-implemented in a sub-class to give finer control of how
configs are chosen.
Change-Id: I8b684f01be95a47307b1e429857f01337a9a38d8
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
ls(1) with the -i option and stat(1) show inode numbers in decimal. If
anyone ever tries debugging this problem, we should present the
information that other tools would show too.
Change-Id: I54b24edba5b028cc86744ca302ab918f8baa2d2b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Fixes performance issues in apps which register and deregister objects
very frequently (like nepomukstorage).
Change-Id: Ib4ce8d65868f0e26cd45f1053e4b2f4c13528cfa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This QIODevice uses a temporary file for writing, so that in case of
write errors, the writing operation is canceled, without losing any
existing file. It also avoids having a partially-written file visible
by other processes, at the final destination.
Change-Id: I9482df45751cb890b1b6f1382ec2eea3eb980627
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They are not supported anymore.
Use the standard Qt dialogs instead.
Change-Id: I2b6c7688e24e4345a95d3a9a062f9670cb1a845f
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Bernd Weimer <bweimer@rim.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Mesa has started defining glXCreateContextAttribsARB even when it is not
supported as a feature. To be sure it is safe to use, we need to also check
if it is supported extension.
Change-Id: Ie160dc2b2418a726957b59f47bd290b742562ae3
Reviewed-by: Zeno Albisser <zeno.albisser@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Triggered for example by Qt Designer's new form dialog.
Change-Id: I63a1f1e5425e8d5fc60c10418a715143e65443f1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Since Qt4, there is a bug which causes Qt to drop dead key modifiers
(like graves and acutes) if the user types enough fast on MS Windows.
This happens because of an extrange behavior of Windows, which drops
dead keys on ToUnicode() calls.
This patch tries to workaround that.
Task-number: QTBUG-8764
Task-number: QTBUG-10032
Change-Id: Ifdde25817743194fd5c0b7533c27f46a7a108ca4
Reviewed-by: Friedemann.Kleint@digia.com
Reviewed-by: oliver.wolff@digia.com
Reviewed-by: marc.mutz@kdab.com
Reviewed-by: bjoern.breitmeyer@kdab.com
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Useful for not having to fall back to QPainterPath drawing when using
the raster engine with a retina screen (which has a 2x scale).
Change-Id: I0a9f754d31b0ecd8e8daf7a01331d19716bab680
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This currently fails on case-insensitive file
systems since the check for existence then triggered
and indicated "file already exists".
Check on the file id (inode or file id) whether
the target file is really a different file for a
case-changing rename.
Task-number: QTBUG-3570
Change-Id: I1b2d40850692e02142ee23d2c753428de00aedc6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is necessary for initializing things in a library, which require
a QCoreApplication instance (unlike Q_CONSTRUCTOR_FUNCTION, which runs
before that). Example use cases: KCrash (segv handler), and KCheckAccelerators
(debugging tool triggered by magic key combination).
Change-Id: I5f4c4699dd4d21aea72b007989ba57467e86ed10
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a partial revert of 7abf623. The desktop components have been
fixed to call QStyle in the main GUI thread.
Change-Id: Ifd8364269b7d2e350f34647c128ff2fbde70afd6
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
When re-applying window flags in setParent, force top level on
or off according to state.
Task-number: QTBUG-28872
Change-Id: If931fcb38394f472a6cdf260aa935c1d03779611
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Make sure that dpy->request == dpy->last_request_read after setting
up a new window. If we don't do this, last_request_read might never
be updated until the difference hits a limit that can lead to hangs
in the application (see e.g. QTCREATORBUG-8373).
Task-number: QTBUG-29106
Change-Id: I390493ca6f966dc105d3ea3a2c48abec01177bc2
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
GCC 4.3 had support for decltype but not the new function syntax (which
we call "auto function" for short). That meant the code did not compile.
qtconcurrentrun.h:105: error: expected initializer before ‘->’ token
Task-number: QTBUG-28984
Change-Id: I792276ec59c4f6e73f6137c517636e70c71ed849
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Drop the read and write permissions for group and other users in the
system.
Change-Id: I8fc753f09126651af3fb82df3049050f0b14e876
Reviewed-by: Richard J. Moore <rich@kde.org>
eventfd(7) uses less resources than a pipe, as it only needs to store a
single 64-bit integer, as opposed to a full buffer.
It was introduced first on Linux version 2.6.22 and glibc 2.7. However,
both the configure-time test and the runtime usage require the use of
EFD_CLOEXEC for thread-safety, so this code will be enabled only for
Linux 2.6.27 and up as well as glibc 2.9 and up.
Change-Id: Ic7e10b28d7b1d4ca24be614ed84055c4429a68e4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Some of it still referred to classes that were cleaned up in Qt 5.0
Change-Id: Ief4ed4b4fce074884f755b0d18a526ac40ad1b0b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is a very common thing to do, e.g. in order to send urls via DBus.
Change-Id: I277902460ee1ad6780446e862e86b3c2eb8c5315
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to move QTextStreamPrivate to a private header, to be able to use
its new internal Params struct from qdebug.cpp
Change-Id: If28e25f27bbd04b1825a5eb3e2ef83ecad72e7b2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is needed by QSaveFile.
Move QTemporaryFilePrivate to that header too, to avoid any confusion.
Change-Id: I8dce8a4fb853a9823c49ec565867432331e748cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QFSFileEngine::rename() on Windows doesn't overwrite the existing destination.
Keep that unchanged (it's the desired behavior in QFile::rename), and
provide cross-platform rename-overwrite behavior in the new method.
This is needed by QSaveFile.
Change-Id: I5e753d289d8a53692530a48a1783d62e26169cdc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ShellExecute fails to open a share folder due to using '/' instead of '\'.
Windows API doesn't support forward slashes for extended-length path.
Extended-length path are path that start with a "\\?\" prefix. For example,
"\\?\c:\very_long_path\foo\bar.txt", or in the case of a UNC path that
would be "\\?\very_long_path\foo\bar.txt". [1]
[1] http://msdn.microsoft.com/en-us/library/aa365247%28VS.85%29.aspx#maxpath
Task-number: QTBUG-13359
Change-Id: Ibb113abeebd56f106f76520bc23dba797de548fa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QMessageAuthenticationCode is HMAC implementation based on
QCryptographicHash abilities. HMAC is often used in OAuth and similar
authentication protocols.
Change-Id: Ifc73947ad06c36a1b770315b7e89ba5c01c5e79e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Restrict disconnect() to the clicked() signal, leaving connections
to destroyed() (as used by QStyleSheetStyle) intact.
Task-number: QTBUG-20292
Change-Id: I7471b4d1262ec0684e4446b5c17513717c502749
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Avoid using realpath(X,0) on Mac OSX at all, since
even on versions of OSX where realpath(X,0) is supported,
we still get the legacy version due to our compiler flags.
If we were to change the -mmacosx-version-min to 10.5 or
higher then this patch would be safe but unnecessary.
Task-number: QTBUG-28282
Change-Id: Iee21003f3e9616482483a05ceee706b476091914
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
in qt5, gtkstyle use gtk_widget_send_focus_change, this had a side
effect that will trigger real gtk im module, if qt load the same qt and
gtk im module for same input method, it will cause conflicts for qt im
module. The only gtk widget have im-module property is GtkEntry and
GtkTextView, since only GtkEntry is used here, we only need to override
im-module for GtkEntry.
gtk-im-context-none exists in gtk+ since 2.19.5, and for older version,
it will also harmlessly fallback to gtk-im-context-simple.
Change-Id: I4ffb93453e77c8d5db3349b084342bdca8e4a571
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Because this method creates a QSocketNotifier, it needs
to be split into a part that is run on initialization, namely
QQNXLocaleData::initialize(), and one that is run delayed
through event loop invocation, namely QQNXLocaleData::installSocketNotifier().
Task-number: QTBUG-28701
Change-Id: Ib60000902692bbca4820d3d0bc7719212668dfa9
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Change-Id: I3ea2556769703a8cd4c2931cc2332ab0733fbea6
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
The minimum GTK+ version was bumped from from 2.10 to 2.18 (sep 2009)
in commit 2cce297b58.
Change-Id: I77a48c8a3b0955b00e399f714949d08293abbebd
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
CoreText segfaults when creating paths for color-glyphs:
0 0x00007fff8fd41e69 in TFont::FindColourBitmapForGlyph ()
1 0x00007fff8fd417ac in TFont::CreatePathForGlyph ()
2 0x000000010567d1af in QCoreTextFontEngine::addGlyphsToPath (...)
So we shortcut the code-path, since we don't support Emoji yet anyways.
Task-number: QTBUG-28615
Change-Id: Ife16ae4959077d9eaaf6ea5cd1f27a4e2e01e7f5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
A division by zero occurred since an empty model was used.
Task-number: QTBUG-28611
Change-Id: I1f9e869bda9f76a1c97840dff6ba48ab813bce9a
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
QDBusReply allows one to extract a QVariant and the type reply from an
error reply and getting a default-constructed value. This is useful when
a valid reply can never contain the default-constructed value (0, false,
empty strings, empty arrays, etc.), so it simplifies error checking.
More importantly, qdbusxml2cpp was changed a while ago from generating
QDBusReply to generating QDBusPendingReply, so we need to have the same
behavior.
Task-number: QTBUG-29046
Change-Id: Ia873b9fd4311c0d4e94f0ef623ba405c20bc0e8c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Currently /etc/openssl/certs is symlinked to
/var/certmgr/web/user_trusted, but this will be changed in the future.
/etc/openssl/certs is the folder to be used to read the root certs.
Change-Id: Ic037e5075ec7ee50c132fe08dc69abbe585e32e4
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
These headers are technically private API, since they include private
headers. They should be _p.h actually, but that change I'll leave for
5.1.
Change-Id: I2dec222854e147da0fc166de311012472954012e
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Task-number: QTBUG-29056
QOpenGLContextGroup object is designed to be destroyed by deleteLater(),
but this method will not always work due to the fact that in many cases
event loop will exit before the deferred deletion of the
QOpenGLContextGroup object is queued. Think about the following case:
int main(int argc, char *argv[])
{
QApplication a(argc, argv);
QGLWidget w;
w.show();
return a.exec();
}
In the above program, the event loop will exit before QGLWidget object's
destruction. This will cause the QOpenGLContextGroup object hold by
QGLWidget object never been deleted.
This patch will delete QOpenGLContextGroup object directly with delete
operator if the current thread is the same as the thread which the
QOpenGLContextGroup lives in.
Change-Id: If835d7482474f4a668763fc7c21b293a27f075fd
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This convenience overload allows one to write
QRegularExpression re1, re2, ...;
QRegularExpressionMatch match;
QString subject;
if (subject.contains(re1, &match)) {
// ...
} else if (subject.contains(re2, &match)) {
// ...
} // ..
One can then inspect the results of a successful match in each block
(as well as extracting the captured substrings, etc.).
Change-Id: I0fb8be8b577656e8db994198f8105c26c4fe67b0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows to put them in containers, and to enable subsequent
features for QString.
Change-Id: I3b3fe695ffe6930331ed9f670738376722e0fc36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Explicitely pass the number of capturing groups for which the
offsets should be reserved in the capturedOffsets vector,
instead of relying on it adding 1 (for the implicit capturing
group #0).
In case 0 is passed, don't allocate any space for that vector.
This is being used in case of NoMatch match type or failing
match (invalid regexp, out of bounds offset, etc.).
Change-Id: I0ec7646d5bd53e7a7973177100b163a5e5030307
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Mac if AssertMacros.h has already been included then it defines
verify which conflicts with the verify static function. Therefore we
just undef this if is already defined.
Task-number: QTBUG-27316
Change-Id: I5960e504c4efa4fc4ff65ba66bbd7decb33ffc62
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This ensures that unexpectedly stopped (for example, when minimizing
a window) style animations are removed from QCommonStyle.
Task-number: QTBUG-28978
Change-Id: I1403502d85e0614d8644892a2231938c29a8c9c2
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
qmake tries to replace all occurrences of the install prefix with a
literal ${prefix}. of course this would mess up build paths which happen
to live under the prefix (this is untypical, but still), which would
break the sed magic in the subsequent install step.
as qmake itself has no use for the .pc files, it's ok to target them
directly for the install dir. we do the same with the include and lib
dirs already.
Task-number: QTBUG-28807
Change-Id: I53d7f0f3b357f67f30bea07554794f60160376cd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... instead of a zero configuration. That is documented already for
QNetworkAccessManager::setConfiguration().
Task-number: QTBUG-28973
Change-Id: Idba5be990745069667a50c85286cf530580d4efe
Reviewed-by: Lorn Potter <lorn.potter@jollamobile.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Implemented QAccessibleActionInterface in QAccessibleTableCell to allow
selecting and unselecting table cells, as there was no way of selecting
or deselecting a simple cell using accessible tools.
tst_qaccessibility.cpp was modified to test the new methods.
Change-Id: I7bdfe0b363a9813d4a7c62e96b6c924b163f2121
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This is done to support texture uploads in an image provider. It ensures
we can load the texture using QImage in the image provider, and when
it is later painted as a pixmap, the cacheKey will be identical
(assuming no format conversion was required).
Change-Id: I54229511ed91ce5430cc478af5aff0d96685a2da
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Also, allow to set menu-wide font (instead of per menu item),
and minimum width.
Change-Id: I5f83f260602f55b9409ad69abf670afb59b2d33a
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Introduce a function named deleteClonedAnimationStyleOption() in
qwindowsvistastyle.cpp to delete style option cloned by
clonedAnimationStyleOption() to prevent object leak which is hold by the
actual style option object.
Change-Id: I1afd95ddab237059ce3460ac0b52a65de102eaa5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Change 8927084d0a made a mistake in
reversing the boolean logic of the type >= TxProject logic,
causing us to try to use the font engine for perspective
transformations instead of falling back to QPainterPath.
Change-Id: Ideb59751ace23ab83f8ebd4f02dbe6c1724644a5
Reviewed-by: aavit <eirik.aavitsland@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This was another bug resulting from modularization.
qdoc is now run twice for each module in Qt 5.
First, qdoc is run with the -prepare flag for each
module. The only thing qdoc generates is the .index
file for each module. Then qdoc is run with the
-generate flag for each module. Here, for each
module, qdoc first reads the .index files for the
modules on which the current module depends. Then
qdoc generates the docs for the module.
qdoc was not reading the index files for the
prerequisite modules, when it was run in the
-prepare phase. This has now been corrected.
qdoc now reads the prerequisite .index files
in both the -prepare phase and the -generate
phase.
Note that this requires that the order qdoc
runs in the -prepare phase must be the same
as the order of building modules when building
Qt 5.
This change also tells qdoc to ignore nodes,
when traversing its main data structure to
output docs, if the nodes came from reading
a .index file, because the docs for these
nodes are generated in the -generate phase
for their respective modules.
Task-number: QTBUG-28508
Change-Id: Id73652ae1c4022e4c9e4f199caab12a854e5f9b4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Only if minimized does QWidgetWindow need to remember the previous
state. Maybe it's OK to restore from fullscreen to maximized though.
Task-number: QTBUG-29030
Change-Id: I1e2724c8811366c9536a3e372ce281e8d473a4ac
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
\obsolete for one value was marking the whole enum obsolete.
Change-Id: If022b4af8365e3448556ca11a538203ab5c63c78
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
the KDGETMODE ioctl should use a pointer to int as param,
not a pointer to pointer to int, otherwise it may crash
Change-Id: Ie255d240f3b6ca1ff5398f972308116135374ae3
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
The mingw headers lack the IPV6_V6ONLY define, depending where you get
them from. Currently the headers provided by mingw-builds are more
complete than those from mingw.org itself.
I have removed the compile time check, defined the macro if it is
undefined, and it should be just a runtime check for if you are running
on windows XP you get no dual stack binding.
Task-number: QTBUG-28787
Task-number: QTBUG-28971
Task-number: QTBUG-28972
Change-Id: Iafadbb55d367c44ba9f812a24115e65591701b54
Reviewed-by: Ilya Sidorov
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Nobody should break ODR, but we were living with apps breaking it
for at least 8 years. Sure it is an undefined behavior but in many
cases it works. I do not think that Qt should enforce usage of
a proper C++, it is role of a tool chain. Qt can only indicate that
something is going terribly wrong.
Make message a bit more verbose. Sometimes the ODR violation is not
that easy to fix, therefore a hint is a nice addition.
Update documentation of qRegisterMetaType.
Change-Id: I61dcccc840eec80a4ed5b8a212a912807d239d8c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both Q_UNREACHABLE and Q_ASSUME with an invalid condition can produce
really weird side effects and crashes.
Change-Id: I4d808c705ae98388ef5853e6539b70bd5e5ad34b
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some cruft had built up over time, and this is an attempt at cleaning up
the naming and use of these functions, and should not have any behavioral
effects.
The function supportsTransformations() has been renamed in QPaintEngineEx
to reflect its use, which is to decide if QPainter needs to pre-transform
the coordinates of the static text before asking the paint-engine to draw
it. The new name is requiresPretransformedGlyphPositions().
The OpenGL and CoreGraphics (Mac) paint engines keep their behavior of
not needing pre-transformed text, while the raster engine needs this
when using cached glyphs. The base-class implementation assumes that
all transforms that include a projection will need pre-transform,
which is also the case for the raster engine.
All decisions in the paint engines about whether or not to use the
glyph cache when drawing text are now deferred to the function
shouldDrawCachedGlyphs(), which has been refactored for the GL paint
engine(s) to share more logic. All implementations call the base
class implementation, which ensures that large font sizes will not
be cached. The raster engine will in addition ask the font engine
whether or not it can produce glyphs for the glyph-cache with the
given transform.
This is the only remaining instance of the supportsTransformations()
function, and will for all font engines except the CoreText engine
support affine transformations. The CoreText engine on the other hand
only supports translations (for now).
Change-Id: I8fb5e43e3de3ef62a526a79a6dfeda7f9546771d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The value -1 is used to indicate no stencil buffer, so we have to check
for sizes <= 0 when deciding whether or not to triangulate the path in
QOpenGL2PaintEngineExPrivate::fill().
This fixes an issue where filling a path would end up filling the whole
outline of the path, which was very visible with fonts over a certain
size (when we go from using the glyph cache to drawing filled paths
for each glyph).
Change-Id: Iafa96124481936db1e5109bba6166a6038c7ca83
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
If the widget is embedded in a native window then pos() should be used
instead of mapToGlobal() so that the right position is used. This was
reproduced with the qtwinmigrate solution as the dialogs were not
centered correctly.
Change-Id: I2ce7771f8c1a73aa74ab11faf4f9c57b922eefab
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Windows 8 no longer allows for negative values to WM_NCCALCSIZE
to shrink the title bar.
Task-number: QTBUG-28435
Change-Id: I2e2e5e6aea9cc6781be4e9b06c9547e1e5ec86cb
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Add custom frames which are added to the system frame to
the platform plugin. Make them settable when creating a platform
window using dynamic properties and per window properties
of the platform native interface.
Use this in favor of the native event handling changing the frame
in wizard_win.cpp since that caused the frame/backing store sizes
of the QWindow to be wrong.
Task-number: QTBUG-28099
Change-Id: Idd6416cf1b0eb629f56663088b0ce17162e1739d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Fixes breakage introduced by cdc436ebe6 .
Top level widgets with translucent backgrounds were invisible since
opacity was set to 0.
Task-number: QTBUG-28531
Change-Id: I97058ac1b971422f3bda3a5ffed479ec55bfe5d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
CGRect == NSRect only in 64-bit mode.
Change-Id: I069b5b050ccf02654a65375c3ab0f58f7d5cc659
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Don't autorelease in the elementWithInterface function,
rename it to createElementWithInterface. The element
can then be released immediately or autoreleased ("delete
later").
Change-Id: I155a85404c34d756c1752eb7c24a7fb0f3cf2e77
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
It mustn't be installed and it mustn't be available in the master
include. It's an assembler header anyway.
Also, take the opportunity to add the "We mean it".
Change-Id: Id4233e5bda458714a0d329549afe499d861acc56
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This definition was missing. It's clear MSVC supports this feature
because it has been in use in qtconcurrentrun.h under an #ifdef
Q_COMPILER_DECLTYPE, which is defined for MSVC.
Change-Id: Id76198b2be8bba13fd00c65d6d4f73d3ef601449
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QQnxCliboard::setMimeData was not cleaning the system clipboard aproppriately
when m_mimeData != 0 but m_mimeData->userMimeData == 0, as it would return
early before the empty_clipboard() statement.
Also, we need to emit the dataChanged() signal after the clipboard has been
cleared as well.
Change-Id: Ie06609e6e3a0a0135f1cdb6cf4c90b490ef2fc28
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Both qdoc and Q_QDOC are used in source code, which looks not good.
Change-Id: I4f3a71670278b0758d92bfa5db086a07e1b1acfd
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
qApp->topLevelAt() returns the QShapedPixmapWindow that the DnD
operation created, but what we want is the QWidgetWindow.
QWidgetWindow has the code to handle QDragMove events.
In Qt4, QShapedPixmapWidget had a parent, so was never returned
by qApp->topLevelWidgets().
In Qt5 we must filter it out. Bug is visible in the QNX plugin,
which is the only user of QSimpleDrag.
Change-Id: I920da86f3a1a92ce8e087f5948292fa4c68d4d81
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
A regression caused by 79a389 - it should only draw a styled frame for
text input widgets.
Task-number: QTBUG-28876
Change-Id: I5cda920b7db55f35e0ab6cee460c0e27951d29b9
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
This match type doesn't do any match at all; it's only necessary to
properly introduce default constructors for QRegularExpressionMatch
and QRegularExpressionMatchIterator (since they return the match type
that created them).
Change-Id: Ibfe92459c7fdd23129cf3afe073cd443c461ddeb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Provide addition/subtraction for QMargins as well as
multiplication and division for int/qreal similar
to QPoint. Add unary minus.
Change-Id: If4eb831cfd610b34b5ca361619b1636031811d0a
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
- Addition of a QMargin to a QRect.
- Removal of a QMargin from a QRect.
- Remove implementation from Windows platform plugin.
Change-Id: Iae54bc13e94a7ece48853b1d3f3de2bfc154d2dd
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
QRegExp and QRegularExpression are totally independent, therefore
using two different defines is the right thing to do.
Also, document the new define in qfeatures.{txt,h}.
Change-Id: Ice4826ea543f4b22f1cc27bf31ed6e043d0c43b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The operator<= and operator>= overloads for QPoint are used only with
Q_ASSERT. Clang was correct that they are not used.
Even though they are inline, Clang reports the functions as unused
because they were inside an anonymous namespace. So take the off the
namespace. They are correct for external use, should they be exported
by accident (which they aren't now).
painting/qpathsimplifier.cpp:76:13: error: unused function 'operator<='
[-Werror,-Wunused-function]
inline bool operator <= (const QPoint &a, const QPoint &b)
Change-Id: I67415621e777fd0d59cbdede26c34d8bb13f7346
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
It is not relevant that it has been part of the class since Qt 4.6. It has
always been internal until now. The release where it became public API (5.1)
is what is relevant.
Change-Id: Ib740f3ed6df190884a94fb2c11dd74cd7edb7b1a
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QRegularExpression counterpart for QRegExpValidator.
Change-Id: Ib391e73dd49e32aeb9b48e6f2217b67a17a83a11
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
std::forward and std::move are not yet supported by the NDK.
Change-Id: I1df1b5e88717c0d27a280862b98eb68262927f2b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a refactoring leftover from commit
bb86e77cc437b92d49692bb7026c57626d77079f in qt/qt.git.
Change-Id: I04993faca44ad0ffca2ae163049770c29d232a47
Reviewed-by: Zeno Albisser <zeno.albisser@digia.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
If the dynamic_cast failed in QSharedPointer::dynamicCast or
qSharedPointerDynamicCast, we should avoid creating the QSharedPointer
that shares the weak and strong reference counts. In Qt 5, this does
not imply a leak since the original pointer is stored internally for
deletion. In Qt 4 it implies a leak under certain circumstances, which
this change fixes.
Task-number: QTBUG-28924
Change-Id: Id2de140de4cf676461e14b201ad250c53666b79d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Those certificates have erroneously set the CA attribute to true,
meaning everybody in possesion of their keys can issue certificates on
their own.
Task-number: QTBUG-28937
Change-Id: Iff351e590ad3e6ab802e6fa1d65a9a9a9f7683de
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This had the unfortunate side-effect that focus was reported to change
(but it didn't) just because the qtabbar was shown.
Found by clicking the different categories on the left-hand side of the
options dialog in Qt Creator.
So, what happened was that clicking "Text Editor" would move the
accessibility focus (that the AT client saw) to the "Font & Colors" tab)
Change-Id: I19a508f6a32a77696079d24c3c6408cb6c3d9fd5
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
We should only emit these when the corresponding property value changes.
Since these are changed asynchronously in the case of a platform window,
we should not emit them in the setter, as they are already properly
emitted in QGuiApplicationPrivate::processGeometryChangeEvent().
Change-Id: I5ac00601ddb4e7a8ff02376e5f5135d427913119
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Previous commit b2363a935c fixed keyboardModifiers() after QPA event
processing, but broke QTestLib, which expects spontaneous input events
sent to qApp->notify() to update keyboardModifiers() and mouseButtons().
The commit also did not fix mouseButtons() after QPA event processing,
and missed keyboardModifiers() after QPA Tablet event processing.
This commit fixes all these shortcommings in b2363a935c.
Includes test case by David Faure <faure@kde.org>
Task-Number: QTBUG-26887
Change-Id: I8518b06c4ce86ea7b35120e3353a45ea2a81d356
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
While the Cocoa documentation says we should not cache [NSScreen screens],
it seems that we should not cache its referenced objects either. This
caused a crash in desktop components when using Dial because, given
the way it is being rendered, we need to know the screen pixel ratio.
Task-number: QTCOMPONENTS-1279
Change-Id: If5c3c6f14d04925215b9dca011143a2056a68846
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The UpdateLayeredWindowIndirect function is only available on Windows
Vista and later. If UpdateLayeredWindowIndirect is not available
(e.g. on Windows XP), use UpdateLayeredWindow instead.
Change-Id: I8af23c051560f7e54eda390dae7553543c00a94b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This reverts commit b7f63c6bf7.
It made compilation fail in qstylehelper_p.h if QT_NO_ACCESSIBILITY
was defined - which it is by default on linux without dbus.
Change-Id: I313f5138460d28c44dad128d175df0e53a99287d
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
In the event dispatcher the timer list has to be reevaluated after
each call to filterEvent, because timers could be started in event
filters.
Change-Id: I1a275845fb74c63441f2301555f3459f8295af27
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Task-number: QTBUG-28769
Change-Id: I3f83b6011acf43e5136a762d0f8841b3a910cecb
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
It's currently not obvious that two digit years will always be in the
20th century (1900's).
Task-number: QTBUG-28797
Change-Id: I7dee9a46e0cb803a8f097debc5443d1789c2f16c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Don't call window->handle() inside the backingstore ctor, because
we might still have the window ctor in the call stack
( ex: a QWindow sub-class that creates a backingstore inside it's
ctor).
Crash can be reproduced by running examples/gui/analogclock.
Change-Id: I4622ceaeb05696c5ae0181a528f58e5d102dcb22
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
With trailing spaces in some cases, we would not get the
"no justification at end of paragraph" special case, and continue
in the code, getting the unexpected case where line_length becomes
< 0 which would lead to memory corruption because we were writing
outside our buffers. I added an assert to catch this type of bug
earlier, and I added the trailing spaces to the test for the end
of the paragraph.
The test case added is one example which would crash.
Task-number: QTBUG-27354
Change-Id: Id720a6fa55dbc709ce04dd5321e55687bf960d75
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Omit its value in the documentation.
Change-Id: I474faefde23b0e2e0a77a9e6391fd556a6523128
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The CompareEdges functor class is never used anywhere. Clang saw it
through to the static function that never got used:
qtriangulator.cpp:227:12: error: unused function 'comparePoints'
[-Werror,-Wunused-function]
static int comparePoints(const QPodPoint &u, const QPodPoint &v)
^
Change-Id: I67d821e454daf82bd8107bf20f787aff9496e878
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
qxcbnativeinterface.cpp:246:8: error: unused parameter 'context' [-Werror=unused-parameter]
qxcbcursor.cpp:550:85: error: 'root' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Change-Id: I5fa4e717c86d0e8198e501e6c799e0ceb9264708
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Otherwise it is possible to assert if
qRegisterMetaType<QList<QSslError> >("QList<QSslError>")
is called in a TU which does not include the Q_DECLARE_METATYPE
invocation.
Change-Id: Ice1ffbb0f8d0a745d2bffc8b4e13ca31621e8ca4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This patch allows single selection to be cleared with the normal
control modifier. This affects e.g QTreeView and QListView.
Task-number: QTBUG-8836
Change-Id: I7fd50b987acc3552b36657409568192763257536
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There is no reason those function shouldn't be static. This produces
no change in code, except that the functions may be better optimised.
Change-Id: Ia60b81d4e29a36190a453e8c7c8102c8f547e1a9
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
...if writing system is already known to be supported
Change-Id: Id7ea11e92507a283b2fba2ad944dd0a9772e484d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
qeglfshooks.h:77:21: error: 'hooks' defined but not used [-Werror=unused-variable]
Defining a static variable in a header file is a terrible idea. But if
I remove it, other code breaks and I don't have the time to fix them
all.
Change-Id: I4f94cbc7f0790df91853662749701e8fb11c2347
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Task-number: QTBUG-28875
Change-Id: If72ce0669de8f344603d2da53eeb5644bd5c4f82
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Profiling shows that the cost of QAcccessible::
queryAccessibleInterface is dominated by plugin loading.
(json parsing etc.)
Cache QAccessiblePlugin per class. Also cache the fact
that no plugin is found for a certain class. This speeds
up the average queryAccessibleInterface call by a factor
of 10X
Change-Id: Iab6d052dec499a2203d1dcc4672a8a543b279239
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
For qwineventnotifier.h, just wrap the code around #ifdef Q_OS_WIN. This
has the added benefit of fixing the current qt_no_master_include problem
(that is, even if you #include <QtCore> on Windows, you wouldn't get
it).
For qtypetraits.h, it requires qglobal.h first.
Change-Id: If1ba09a0a29de429a5b87e9878c8ac6a62a443c4
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
kernel/qwidgetsfunctions_wince.h:61:34: error: no newline at end of file [-Werror,-Wnewline-eof]
Change-Id: Icbc35227946652db53fc8454d1d42043aa7c15b9
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Going through QLocale and QString is not really needed.
This also makes the result of the conversion of negative numbers
in bases other than 10 independent of the architecture and
implements the documented behavior of treating them as
unsigned types.
Change-Id: Ibc231dc5241deb5cbadd9796484a8b5f79c29410
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Clang reports:
graphicsview/qgraphicsitem.cpp:1779:13: error: function '_q_qgraphicsItemSetFlag' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static void _q_qgraphicsItemSetFlag(QGraphicsItem *item, QGraphicsItem::GraphicsItemFlag flag,
^
According to the public Git history, in Qt 4.5.1 this function was
already unused. The only reason it wasn't caught so far is that it is
recursive: it calls itself. So it is used... by itself.
Change-Id: I6fc6b33cb314b845525dc9315d0ad742e113d5cd
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
qsql_psql.cpp:774:12: error: enumeration value 'CancelQuery' not handled in switch [-Werror=switch]
qsql_mysql.cpp:1163:12: error: enumeration value 'CancelQuery' not handled in switch [-Werror=switch]
qsql_sqlite.cpp:527:12: error: enumeration value 'CancelQuery' not handled in switch [-Werror=switch]
qsql_odbc.cpp:88:97: error: format '%d' expects argument of type 'int', but argument 3 has type 'long unsigned int' [-Werror=format]
qsql_odbc.cpp:706:76: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
Change-Id: I79965283057e92a44a0c8375530cfb30107c891c
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
It's deprecated and it's not available on iOS anyway. The recommended
way of getting the number of processors online is via sysctl or
sysconf (both of which are just slightly below).
qthread_unix.cpp:397:13: error: 'MPProcessorsScheduled' is deprecated: first deprecated in Mac OS X 10.7 [-Werror,-Wdeprecated-declarations]
Change-Id: I4bf60985fbde155b78b840f3de3ff0a142b78b19
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
qbenchmarkvalgrind.cpp:229:5: error: variable '_qzz_res' set but not used [-Werror=unused-but-set-variable]
Change-Id: I3c5896659105650d6d824b10ff3beffbdf494e24
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The Linux futex implementation had a Q_ASSERT for positive values, but
the documentation says that negative values should be interpreted as
infinite (equal to lock()).
Test that too.
Change-Id: I2f96a502d672732781e88e49797756ca9a809121
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
qtconcurrentfunctionwrappers.h:277:22: error: 'QStringList' was not declared in this scope
Change-Id: I54c48386d90146c872679672a1d8cc3675d49c39
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Requires C++11 rvalue references and variadic templates so we can
implement perfect forwarding.
Change-Id: I62e47d1ffd0c61e8386f9f246aa79031b7430b46
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QUrl::fromUserInput("http://") was invalid, which doesn't make sense
since QUrl("http://") is valid. Same for "smb:" which is actually
even more a valid URL from a user's point of view.
Change-Id: I371ac393d61b49499edf5adbbc2a90b426fe9e5d
Reviewed-by: Marco Martin <mart@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
GCC was complaining:
qevdevtouch.cpp:475:13: error: 'maxId' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Which got me scratching my head: maxId was unconditionally initialised. How
could GCC be complaining about it being uninitialised? Well, turns out that
bestId could be uninitialised and the code does:
if (bestId > maxId)
maxId = bestId;
Of course, if bestId was uninitialised, the warning should have been in the
"if" line first.
Change-Id: I5e174ab2957d76ad040c14fa6ef8535129b6dce3
Reviewed-by: Laszlo Agocs <lagocs83@gmail.com>
The code was copied from the main parser there, so remove the
duplication.
Change-Id: I85748f6f76b3097ff22958d9de67cfa27061a72b
Reviewed-by: David Faure (KDE) <faure@kde.org>
These cases weren't handled before.
The validateComponent function is copied from QUrlPrivate::parse, with
the added modification that it now needs to check the gen-delims for
the userinfo.
Change-Id: I055167b977199fa86b56a3a7259a7445585129c6
Reviewed-by: David Faure (KDE) <faure@kde.org>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
...and remove the outdated QUnicodeTables::Script enum.
QFontEngineData now has one extra slot that never used
(engines[QChar::Script_Inherited]). engines[QChar::Script_Unknown],
if accessed, would be set with a Box engine instance, and could be used
as a minor optimization some time later.
In order to preserve the existing behavior, we map all scripts up to Latin to Common.
Change-Id: Ide4182a0f8447b4bf25713ecc3fe8097b8fed040
Reviewed-by: Pierre Rossi <pierre.rossi@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
gcc is apparently tolerant against this abuse. icc is not.
Task-number: QTBUG-28775
Change-Id: I872d32177562f076ca8aecd263bc4bb3c7e8edc0
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
If the font has a CFF table, GDI will not label it as
TMPF_TRUETYPE, however, we can still use GetFontData to get
the SFNT tables. This is required to get the maxp table which
contains the glyph count, which is required to use the font
with the distance-field renderer.
Task-number: QTBUG-28746
Change-Id: I3ca1e3d96ea53c453e6fa422b33d1f1f5050a82c
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Especially so that subclasses remember to emit reset.
Change-Id: Iadcae3fc5fe72584465d4134f385ed0a1d77bfcd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QDoc supports \relates in the context of a function that
relates to an existing class or a namespace, but not in the context
of a class. We can use \sa to list the related classes or namespaces
for a class instead.
This change ensures that QDoc generates documentation for QMessageLogger
and QMessageLogContext classes.
Task-number: QTBUG-28468
Change-Id: I2242ab730fe5e3acf54b6fa65774e751d2daa7a4
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Explicitly delete animations, and remove the check for stopped state
as that is already done by QAbstractAnimation::stop() and we want to
delete the animation regardless of the current state.
Task-number: QTBUG-28506
Change-Id: I3e34316e5077a8627ff5e6d3babd1873bbbaa774
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
...where the values are not aliased to Common script.
The old QUnicodeTables::Script enum was retained for compatibility reasons
until Qt internals are updated to use QChar::script().
Using QChar::Script instead of QUnicodeTables::Script would improve both
the text analysis (itemization, boundary finding) and the text shaping quality.
This also a required step for switching to Hurfbuzz-NG.
/* This adds 6668 more .rodata bytes */
Change-Id: I5aa3d12c550528d0052542436990f8d0779ea8e5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The MinGW-w64 32-bit .def files shouldn't be used with MinGW-w64 64-bit.
Rename .def files from <library>_mingw.def to <library>_mingw32.def and
only use them if QT_ARCH is i386.
Change-Id: I5dc2a87f7d2ed59bf954faf2983d0787ed9e00e9
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Patrick von Reth <vonreth@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Generalize the check for gui by checking for needs_qpa_plugin
CONFIG value instead, which gui adds to MODULE_CONFIG.
Task-number: QTBUG-28215
Change-Id: I5834a3f81e5c3868ee1a3fa405ebc6410db1f900
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When only PG_VERSION was available for getting the client driver version
for PostgreSQL it meant that it would not detect the client version and
subsequently would not set the connection up correctly as a result.
This fixes the blob test already in tst_qsqlquery.
Change-Id: Ie2176a43b6be9c0e835498fca5aea129f0cc8fc6
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The location of the mkspecs directory comes from the archdatadir, which
distros will all set.
Change-Id: I20dbdce76db13dbd37eec065009e215f98985907
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the pixmap passed in is null then we should not try to create a
NSImage for it, so we just return 0 instead.
Change-Id: Idae7ba304c97878e0aa8ae1eead5f4bb644a73de
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Terms fixing. Changes apply to Qt5 as well as Qt4.
Change-Id: Ibb31ab0d68c62f3feb63722dd967932c2543fa37
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This should also remain working for previous connman
Change-Id: I5f0a1947f11948b202391ba0c256067faa01ce6d
Reviewed-by: Lorn Potter <lorn.potter@jollamobile.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It needs the QTest namespace and QTest::qWait to be declared.
Change-Id: I1c72a13231603a61221cf1b7ad9234aa4cba6d60
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
qatomic.h includes qbasicatomic.h, so break the cyclic inclusion
problem.
Change-Id: If72bacbcfa36993336786f31e8980fbd43df8bdc
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Some implementations seem to not have the gtk_adjustment_configure
function implemented so we check for this so that there is no problem
when it tries to use it.
Task-number: QTBUG-23569
QTBUG-25760
Change-Id: I777ce09268f86907f3da3cede408c9a41be566cf
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Karim Pinter <karim.pinter@digia.com>
qt_mac_get_scaleFactor() uses a deprecated function, but as this
function is no longer needed internally anyway, just remove it.
Task-number: QTBUG-28574
Change-Id: I4e3cd2383ecc56aa6f9e3931a1806c62b1cedeb5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
MinGW-w64 32-bit requires the functions exported in the .def file
to be decorated.
Change-Id: I174a92829706a9fb6b0007b2c057300bd69e6d9e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The updates for focus/selection in QTreeView
were still adding +1 as it was required in Qt 4.
Task-number: QTBUG-28174
Change-Id: Ib9fea7e20d431a0ef0db18494e7bdda06a0646b0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The long int type is incorrect for Windows 64-bit as LLP64 is used
there.
Change-Id: If4ccf49d6bb0cd7ba4ff2997cebfdbe5e7e9711c
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
On X11, the X resource system can override the physical DPI of
the screen for resolving font sizes etc. Correctly load the
setting and adjust the logicalDpi() accordingly.
Change-Id: Id60d03d1d214fb99e9de17a65976abd170bb7cca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
According to the comments of selectRow and selectColumn, the expected
behaviour of this method was to select a row or a column and unselect
any cell that were previously selected. However the actual behavior
was to select only one cell and not deselect any cell.
Moreover, according to the specification there's no simple way of
selecting multiple rows or columns as when one of the methods is
called for selecting one row or column the others should be
unselected.
The specification was changed not to require the rest of the cells
to be deselected, although they might be deselected if the
selectionMode requires that in order for the new row/column to be
selected.
The implementation of these methods was changed in QAccessibleTable
and QAccessibleTree to select the whole row/column and take into
acount selectionMode and selectionBehavior.
tst_qaccessibility.cpp was modified to test the new behaviour of
the methods.
Change-Id: I29635d014792169302435e81704e02c16f951238
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Especially with the newer QML accessibility we
can end up with events for objects that cannot
instantiate a QAccessibleInterface.
Let's not crash in that case.
Change-Id: Ie5d38315f32d30540eb4adcb74a7b3bfa667f03f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Symbols in dlldata.c conflict with symbols defined in ActiveQt
when linking Windows platform plugin statically into same binary.
Fixed by not building dlldata.c when building static library.
Task-number: QTBUG-28645
Change-Id: Ibc5928124ad6e1fde2a1fa761ada4f345eb65a20
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
qtypeinfo.h is included by qglobal.h, so it needs to include that before
the #ifdef. Otherwise, we get a circular dependency problem with
qflags.h:
./QtCore/../../src/corelib/global/qflags.h:60:27: error: "Q_PRIMITIVE_TYPE" has not been declared
Also, take the opportunity to fix the other headers that are included
from qglobal.h to avoid similar problems in the future.
Change-Id: I99a56f42775c24bdcc796995b06509c1ca0cb849
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
(cherry picked from commit 797f3c0a01)
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
When the print panel was closed then it would clean up the printinfo
and if it was requested for the same QPrinter then it would not be
recreated in time. Therefore we check if it is initalized and if not
we re-initalize it.
Task-number: QTBUG-28657
Change-Id: I7dc9011b80e03cfa3eae8fee2fcf6cc8021a8566
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
(cherry picked from commit dde9569d38)
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
- The qdoc pages were related to qtcore and they were
referring to snippets inside the qtcore module boundary.
- Fixed the exampledirs for QtCore to include the examples
that are referred by the \snippet instances in the
moved qdoc pages work.
Change-Id: Ibb6dbb131920ea8692a203f6145863e5012e4602
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
(cherry picked from commit 69e6029411)
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
qtypeinfo.h is included by qglobal.h, so it needs to include that before
the #ifdef. Otherwise, we get a circular dependency problem with
qflags.h:
./QtCore/../../src/corelib/global/qflags.h:60:27: error: "Q_PRIMITIVE_TYPE" has not been declared
Also, take the opportunity to fix the other headers that are included
from qglobal.h to avoid similar problems in the future.
Change-Id: I99a56f42775c24bdcc796995b06509c1ca0cb849
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The keyboard mode is shared between applications.
You can reproduce this bug by clicking on a spin box,
it will open a number only keyboard, then close the application
and run an application that shows a text edit: a number only
keyboard will appear.
PPS keyboard already does this.
Change-Id: Ia22e96ce13ad0cec1fd3b43fcdf4d03abfc25134
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
When the print panel was closed then it would clean up the printinfo
and if it was requested for the same QPrinter then it would not be
recreated in time. Therefore we check if it is initalized and if not
we re-initalize it.
Task-number: QTBUG-28657
Change-Id: I7dc9011b80e03cfa3eae8fee2fcf6cc8021a8566
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When disconnect()ing through a QMetaObject::Connection, if the
QObjectPrivate::Connection contains a slot object, deref it, so
that it will be destroyed before the next run of cleanConnectionList.
Previously, a copy of the functor passed to connect() was kept until
QObjectPrivate::cleanConnectionLists was called (by adding a new signal,
or the sender was destroyed), even after a successful call to
disconnect(). That is, we were keeping that copy allocated without
any good reason.
Change-Id: Ie6074ea797df1611cb995dec07c5b5a742360833
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The QObjectPrivate::Connection refcount was not decreased
when disconnect()ing, therefore it was kept alive by the
owning QMetaObject::Connection object.
This removes a leak in case the QMetaObject::Connection
survives the sender object, after a successful disconnect().
Change-Id: Ie2ea59b269a0e589ae23c1457df7533be77c0797
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QGraphicsItem::setActive() is by design not guarded against calls that
do not change the current activation state of the item (e.g., calling
setActive(true) on an active item or calling setActive(false) on an
inactive item). This is to ensure that it's possible to set explicit
activation state on items, either before they are added to a scene, or
while the scene itself is inactive.
Before this fix, calling setActive(false) on a panel item that is not
currently active would by accident clear activation from any other
panel that might have focus. After this fix, activation is only cleared
if the item setActive() was called on itself is the active panel, or
is the panel that will regain activation once the scene is reactivated.
Task-number: QTBUG-28544
Change-Id: Ic4752f1e4400f9a0660bc968834747610212bb52
Reviewed-by: Bjørn Erik Nilsen <post@bjoernen.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
This signal is emitted by QGraphicsScene whenever focus changes in the
scene (i.e., when an item gains or loses input focus, or when focus
passes from one item to another). You can connect to this signal if you
need to keep track of when other items gain input focus. It is
particularily useful for implementing virtual keyboards, input methods,
and cursor items.
Task-number: QTBUG-10570
Change-Id: I9cbbd9a2d15d6f568e1597c2c33ec049eb70f793
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
qt is already added by spec_pre.prf, warn_on and depend_includepath by
default_pre.prf.
Change-Id: Ic00e0ba496d698ed9659c476f2ca99fc0f86a093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It appears this method has been copied from ActiveQt. When building
Qt statically, linking Windows platform plugin into any application
that also uses ActiveQt will cause error about duplicate symbol.
Renamed QVariantToVARIANT to QVariant2VARIANT to avoid conflicts.
Renaming is done here rather than ActiveQt, as that symbol is in
exported header in ActiveQt.
Task-number: QTBUG-28645
Change-Id: Id0d7fc51d4455b463515e7c6178798ad61217c35
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Makes tst_qgraphicsitem::tst_focusProxyDeletion not crash.
valgrind reported the error when running tst_qgraphicsitem. The crash
was very real; when deleting an item that has another item as a focus
proxy, the proxy still had a reference to the deleted item's focusProxy
pointer. I'm not a huge fan of whitebox testing but thought this crash
justifies a modification of the test to make it fail, instead of just
passing silently with a warning only given by valgrind and friends.
FTR the reason the test doesn't crash hard is that the memory is freed
but not reused within the scope of the test. So the access to the
pointer d_ptr->focusProxy succeeds, it just accesses memory that might
as well have been reclaimed. But this is quite undefined...
Task-number: QTBUG-28321
Change-Id: I2624631f5e5c2a8aa8bd4efe1fc128eba6c61f56
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Building ANGLE with MinGW results in too many symbols being exported in
the DLLs. Always use DEF_FILE on Windows to limit the symbols exported
and eliminate symbol conflicts when libEGL/libGLESv2 is linked by other
libraries that include their own version of ANGLE (e.g. QtWebKit).
Change-Id: I7bb1f90d9996eabf30095323e9399efa1c23e3a1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This changes behavior, but I would argue it's a good change. If you
create a panel and activate it (e.g., by simply showing it or reparenting
it onto an already-visible item), you expect the panel to gain focus /
which is sort of the whole point of activating it. Prior to this change,
you had to have explicitly called setFocus() on one of the panel's
children, which would give that item subfocus, for that item to auto-
gain focus when the panel was activated. This change makes it more
automatic. If the panel itself or any of the widgets in its focus chain
can gain focus, they will gain focus when the panel is activated.
So the new logic is - if the panel already has a focus item, so if
someone explicitly set subfocus on an item before the panel is shown,
that item gets focus. Otherwise, if the panel itself can gain focus
(e.g., someone makes a line edit / text edit panel), it gains focus
when activated. Otherwise, we search the focus chain until we find
the first item that can gain focus. This last case is the file dialog
case, where the dialog itself can't gain focus but typically the
first item in the focus chain is the primary focus widget, such as
the search field or the directory list view.
The change also fixes this for the first Tab. If you clear focus on
a panel, the user expects to be able to press Tab to regain focus.
Prior to this change that didn't happen. Now, the panel or the first
in the focus chain that can get focus gets focus on first tab.
Task-number: QTBUG-28194
Change-Id: Id7ec1741d0d5eb4ea845469909c8d684e14017f1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Check if the accessibility element is valid before
calling childAt.
Change-Id: Id63c11f18b262c3c3a839db8ee2d11c0d7adc822
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This makes it possible to use accessibility with
QQuickWindow.
Change-Id: I5fccd5f25021c4953b03e146705f48a198dbaaa7
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Modified AtSpiAdaptor::notify to handle enabling and disabling widgets.
Change-Id: I9a23f74d891aaf123d7fc094bdf63e384e1d65fe
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Adding a new private method to simplify notifying that the state has
changed as it is something that is frequently done in AtSpiAdaptor::notify
Change-Id: Idf21715b5d20212adb301ae9bca05f1edfc19946
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
For moc, rcc and uic, then it's friendly for tools like ccache.
ccache is using md5 to check file modification, but the different
timestamp info will cause different md5 for same meaningful
contents, it will disabled ccache.
Updated the autotest for uic and rcc.
Task-number: QTBUG-26589
Change-Id: I9f1dcf6cd826ad9603af6e183757bcd748c32bd1
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The first branch is required to MSVC. The bitfield isn't large enough to
represent all possible enum values of Virtualness for MSVC.
In addition, using bitfield is a premature optimisation in this case.
So remove them.
Change-Id: I4c5f85271d2bca1411426e6a321a795a7e783aff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QDate::toString() should explain QDate::shortDayName() and
QDate::shortMonthName() will be localized name using the
default locale from the system.
Task-number: QTBUG-28522
Change-Id: I027a72773b5772bf00344f14a4b522e41c9e63db
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Mac it was not starting the dialog with the specified directory when
one was present. If a filename was given as well then it would start up
fine.
Task-number: QTBUG-28161
Change-Id: I7cce0d065dd57e6433ce62380d4263d6e20b6e7c
Reviewed-by: Liang Qi <liang.qi@digia.com>
The enum was already deprecated but the documentation still listed it
so now it is correctly obsoleted.
Change-Id: I9d64fe58a5e70de7161928da2d09b4532d450274
Reviewed-by: Liang Qi <liang.qi@digia.com>
We need to do bounds comparison on the actual offset we're going to use
with _mm_load_si128 to read 16 bytes from memory (even though we won't
use the trailing bytes in the end).
Task-number: QTBUG-28324
Change-Id: Id0d6094da796ca67338d8ad225fa6b2f309bbe6e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This only effects compilation with DEBUG_QSHORTCUTMAP.
Change-Id: I184e644f2165049336cee8a6ac63a3301cf4c849
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
- The qdoc pages were related to qtcore and they were
referring to snippets inside the qtcore module boundary.
- Fixed the exampledirs for QtCore to include the examples
that are referred by the \snippet instances in the
moved qdoc pages work.
Change-Id: Ibb6dbb131920ea8692a203f6145863e5012e4602
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Delete the interface if it's not returned.
Change-Id: Ia1e1f94d14584ab3af1b89a0baac5d343ffdd1f4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Autorelease ("delete later") the created attribute
name array.
Change-Id: I2d7af9eb1fd899f04c8acb90204600a2dd43fa20
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Fix off-by-one error. QAccessibleInterface::child()
is 0-based, start the iteration at childCount() - 1.
Change-Id: I0c841b692adab0aae4e8ac44c7d308cd7a176ac8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The function is massively ineffective on deep hierarchies
and not strictly needed. (It's supposed to filter out
"Ignored" children - VoiceOver will do that anyway based
on accessibilityIsIgnored())
Change-Id: I9a74b5f5e9b7880e0d46d5330f7192472eac7a36
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Corrected in qkeysequence.cpp
Link from external-sites not working
So, entered hardcoded url.
Task-number: QTBUG-27512
Change-Id: I5b8d25d2b1f4f4fb0d57d2306de7f1b7c3dc40e3
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Font styleName support was disconnected since Qt switched to QPA
fontdatabase. Now add the code from Qt 4.8 back to enable this in
QPA.
Change-Id: Iab2cbfd5468f87542183348c2123ca4b2c270692
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
(cherry picked from commit fa7661d8b2)
Use localized family name and style name when selecting font with
non-English locale
Task-number: QTBUG-27415
Change-Id: Ie81507ed011fc096e0f5edad146e97c392e86494
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
(cherry picked from commit 3c09f6bc9a)
Due to preparation for GTK3 support, QGtkStyle::drawXxx() no longer
creates a local instance of QGtkPainter upon every call, but
QGtkStylePrivate::gtkPainter() will (in the future) dynamically choose
between QGtk[2|3]Painter. The same painter instance is now re-used
between the calls, but wasn't properly reseted between.
Task-number: QTBUG-28557
Change-Id: I29be318dbb54d97ed23dfb88d406a3a833db4369
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
(cherry picked from commit 0b0b74a563)
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Font styleName support was disconnected since Qt switched to QPA
fontdatabase. Now add the code from Qt 4.8 back to enable this in
QPA.
Change-Id: Iab2cbfd5468f87542183348c2123ca4b2c270692
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Use localized family name and style name when selecting font with
non-English locale
Task-number: QTBUG-27415
Change-Id: Ie81507ed011fc096e0f5edad146e97c392e86494
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
QGLTextureCache::remove(qint64 key) locks the QGLContextGroupList mutex
before removing a texture. Removing the texture might cause the
QGLShareContextScope construct to be invoked, which calls
QGLContext::currentContext(), which will wrap a current QOpenGLContext
in a newly created QGLContext. That also triggers the creation of a
QGLContextGroup object, which will register itself with the
QGLContextGroupList, an operation that again will lock the
QGLContextGroupList mutex. To prevent this from deadlocking we make the
mutex recursive. The whole QGLShareContextScope approach is really
broken and should be replaced, but for now it's what we have in QtOpenGL
(QtGui has the replacement QOpenGLSharedResource).
Change-Id: Id1ff69035af3f31b690892c03f74748d052a278b
Reviewed-by: Zeno Albisser <zeno.albisser@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The QX11Info class needs this.
This required adding the missing nativeResourceFunctionForScreen
in QPlatformNativeInterface.
Change-Id: I2c6e91c7f122f3ecdf769a177deafd2aa3896e2f
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Alberto Mardegan <mardy@users.sourceforge.net>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This increases consistency a lot: all windows and dialogs from a Qt
application will show the app display name in the caption, on Windows and X11.
This helps identifying which app a dialog belongs to, which is especially
useful when the dialog is very generic and shows up unexpectedly.
For compatibility reasons, the app name is added to the caption only
if setApplicationDisplayName() was called -- or if the caption would be
completely empty. The standard Qt4 case (setWindowTitle + no display name)
is unchanged.
Change-Id: Ib284c62c1f4c0bc923e5bc2d10247d95e9aa76c1
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
translateMouseButtons() was only able to correctly handle the left,
right, and mid mouse buttons. Thus, if any buttons outside of those were
pressed, the motion notify event would basically unset the mouse button
mask, leading to a release event being sent instead. Later on, when the
actual release event arrives, that button gets xor'ed into the empty
button mask generating another press, and later another motion event
will generate a release. In the end that means two press-release
sequences are sent for any extra mouse buttons.
Instead of getting the mask of the buttons currently being pressed from
the event, we need to keep track of the mask ourselves.
Task-number: QTBUG-28561
Change-Id: Iaa67e784a13d792deef8fc29dbd5456a5471a861
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Rick Stockton <rickstockton@reno-computerhelp.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We also need to detach() the taken value in case the compaction triggers and
modifies the underlaying data.
Change-Id: Idcdeba4236b8e208d107d41be2decbdfc5721300
Reviewed-by: Bjørn Erik Nilsen <post@bjoernen.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
Change-Id: I6565bda336c152dfdc0cb49f168d90bdceacb2b1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Due to preparation for GTK3 support, QGtkStyle::drawXxx() no longer
creates a local instance of QGtkPainter upon every call, but
QGtkStylePrivate::gtkPainter() will (in the future) dynamically choose
between QGtk[2|3]Painter. The same painter instance is now re-used
between the calls, but wasn't properly reseted between.
Task-number: QTBUG-28557
Change-Id: I29be318dbb54d97ed23dfb88d406a3a833db4369
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
It has been available in user32.dll since
Windows2000/Windows Server 2003
Change-Id: Icbfc63e944bc9e8098e3b01fd57dc7aa45bcd345
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Implementation of QQnxCursor, a QPlatformCursor subclass. Due to the lack of a
proper cursor API from the underlying OS, this class only caches the current
cursor position to make sure that the QCursor class works properly.
Change-Id: I55031184a009f3b26ad4af36b1975204e8fa80dc
Reviewed-by: Sérgio Martins <sergio.martins.qnx@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
Pass opacity from the QWidget to QWindow and to the platform
windows.
Task-number: QTBUG-28477
Change-Id: If5a85d9183bd1ca33dac2052936ecd1e6c0b5f6c
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
When clicking at the bottom-right corner of a menu in a menu
bar, it appears at the wrong position. Add test and stabilize
RTL-tests by making sure the layout direction is cleared should
they fail.
Task-number: QTBUG-28031
Task-number: QTBUG-2596
Change-Id: Ibc5ae916388753908e9f3ee98e8859faaa0c8723
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The stepSize property was missing in Qt 4 and is
a sensible addition to the value interface.
Change-Id: I7571800d50ee7e4194c09c4db40300809a1ce45a
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The file qwindowsfontenginedirectwrite.cpp uses the Win32 API function
GetUserDefaultLocaleName which requires _WIN32_WINNT to be set to 0x0600
as it only became available in Windows Vista
Change-Id: I704705d3fc729bb0167121de991d01c957e1e7e4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This was introduced in patch 8534bb3d, then overwritten by c85ca8d1.
Change-Id: I6b7489e2b2f3311822c282f50c74bd68c787229d
Reviewed-by: hjk <qthjk@ovi.com>
If we don't do this, we can have binary compatibility issues later.
For example https://codereview.qt-project.org/#change,41700 will change
the behavior of setWidth and setHeight to call setSize instead of
setGeometry, because we don't want changing the height to also set
the position of a window; if x and y are left uninitialized it needs
to remember that fact. But if setWidth is left as an inline method,
calling setGeometry, then an application which was built with 5.0
would behave differently than an application built with 5.1, even if
Qt is upgraded after the application was built. To generalize,
setters should never be inlined.
Change-Id: I1ec42cb61a45fe541b3f3bb99d1b1ca24ad2a517
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
\target sets up a unique target that should be
accessible with \l across module boundaries.
This was not working across module boundaries.
Now it has been fixed, and it is one way of
handling the problem described in the referenced
bug report.
Task-number: QTBUG-28244
Change-Id: I541f409b998f84b2b8dcf66751762cf07f9f108b
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Ported the rather trivial implementation from Qt 4.
Task-number: QTBUG-28477
Change-Id: I44e14a3c150af43c6b9b880242b655fe06084fd7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QSpanData did not properly check that whether the matrix is an affine
transformation or not. Therefore, qt paint engine chose the wrong
algorithm for drawing in case of a perpective matrix.
Change-Id: If0523bd45e86679a08874713da3fbe33a9852551
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
In src/3rdparty/xcb/xcb-util-image/xcb_image.c, the includes require all
this directories, or otherwise compiliation fails when -qt-xcb is used
in the configure step.
Change-Id: I8566bea662eced144cb9a2b1ce1dbfdb65654dea
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
We ask grayscale or mono bitmaps from FreeType but in some cases treat
the output as ARGB without conversion. This surfaces using QGLWidget as
a viewport to QDeclarative content. The offending glyphs are then
generated through QTextureGlyphCache::textureMapForGlyph. This adds a
fix for converting to the expected ARGB32 data.
Change-Id: Ia219582ebd76b7e4e9379111a42312b4d97718de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Loading both the debug and release version of the cocoa
plugins causes the objective-c runtime to print "duplicate
class definitions" warnings.
Fix this by directing the plugin loader to only load
one of the cocoa plugins if both are available. Implement
this as a special case directly in QFactoryLoader.
Define QT_NO_DEBUG_PLUGIN_CHECK to allow mixing
debug and release builds.
Task-number: QTBUG-28155
Change-Id: Ie1927b219cc501a821f91b7e4b56f0589e0acbf5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For two reasons: 1) those operators are gone and 2) the ones that remain
are atomic.
Task-number: QTBUG-28532
Task-number: QTBUG-24627
Change-Id: I1e9d1b076d923546c1ee3d45f312066590f97416
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Make tst_qquickview::resizemodeitem pass.
Returning on equal geometry breaks for non-top-level
windows.
Change-Id: I3b361655e25b6cf2d5e29410dc1f3567ab8f54d9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The crash could happen if a QWidget in the UI got deleted, and
the AT client later tried to access the widget through the cache
(qAccessibleRecentSentEvents()).
Solution: Use a QPointer as a guard.
Task-number: QTBUG-26187
Change-Id: I1aa716766626cf171757e76ba255a6d5ae4fd854
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Task-number: QTBUG-28389
Task-number: QTBUG-28380
Change-Id: I91edd9c8aba60118d722bbf9ad5b85f994398823
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
QWindowsStyle considers QStyle::State_On as pressed, whereas
QMacStyle uses the same state for transient scrollbars. Thus,
to indicate transient scrollbars, QScrollBar::initStyleOption()
must set QStyle::State_On only when the current style actually
supports transient scrollbars.
Task-number: QTBUG-28523
Change-Id: I94d207b1e8c5c4bd6f4b99e8b4f1661197fbe9dd
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Commit 320b16110f changed the arguments
of swprintf to be compliant with latest MinGW-w64 headers: The headers now
excludes the non-standard swprintf(wchar*t,wchar_t*,...) version for C++11.
However, the swprintf(wchar_t*,size_t,wchar_t*,...) version is actually
not supported by e.g. stock Mingw-32 from mingw.org.
Instead, use _snwprintf(wchar_t*,size_t,wchar_t*,...), which both
MSVC, and all MinGW versions should support.
Task-number: QTBUG-28520
Change-Id: Icadd11773a25143e46a72c898adfd1c324f9c468
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Since all gui applications already need some QPA plugin added,
we might as well add the default plugin and generate the code
to import the plugins automatically.
User can opt out from the automation by removing relevant
items from CONFIG variable: link_qpa_plugin or import_plugins.
Task-number: QTBUG-28131
Change-Id: Ic171c363464c099143374d3e39bcc28f6edf73d2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The code removed was in a if (d->control) block and therefore d->control
was always going to be true thus rendering the nested if invalid. The
case that this would account for is already handled in the else for the
parent if so this code is in effect not needed.
Change-Id: I799383e238560a8a8e3d7dc073d3b1ee74269f90
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
In SHA 51914375b6 the rubberband
selection was fixed, so it followed the scene-point on mousemove.
However wheelEvent could move the view - but avoid update of the
rubberband (that would not be updated until next mouse-move).
This patch fixes that (and generally improves rubberband behavior)
since QGraphicsViewPrivate::mouseMoveEventHandler is called by
replayLastMouseEvent, which is called from various places,
where we need to update the rubberband (e.g scrollContentsBy).
Change-Id: I1b78c27edaaecea797a2319086d7a11d437d2bd3
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This means the xcb plugin library will be named libqxcb.so instead of
libxcb.so, which doesn't clash with the system's libxcb.so. We need to
consistently apply this on all platforms for static linking to work.
Change-Id: I1640a7cae7b9846bbe62b19ab1c2c5bad7d02b4c
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This patch moves the rubberband-handling from QGraphicsView::mouseMoveEvent
to QGraphicsViewPrivate::updateRubberBand. This function is then
called from QGraphicsView::mouseMoveEvent.
I have removed some d-> and added some q-> but beside that
nothing is changed in the code.
Change-Id: Iab70c55635c43733e0e02bb70e2bb03b90bf62f0
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The QPointF ep is not modified. There is no reason it shouldn't
be const.
Change-Id: I41fb8f9ae5296a7a40f7eb8be13fc14d56915e3f
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Even though the code before theoretic is ok, we really shouldn't
have a reference since mapFromScene returns a QPointF and not a
const QPointF&.
Change-Id: I5ea8fd238bdbdd21fb1e3b6b5f280d45e3bc43ef
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
There are two ways to register a type: using Q_DECLARE_METATYPE(T) and
using qRegisterMetaType<T>("T"). Doing one thing in one translation
unit and another thing in another TU constitutes an ODR violation,
because the value of QMetaTypeId<T>::Defined will differ in the two
TUs.
By adding the information whether a type was declared with
Q_DECLARE_METATYPE to the typeFlags(), such a use will trigger
the existing binary-incompatibility failure that checks for
equality of the incoming type flags with the stored ones (if any).
I had to encode the type as a defaulted function argument in order
to avoid the linker merging instantiations of the function templates
and therefore rendering the detection moot.
Change-Id: I82017caf300458b411cc8ac2f6653536fac64117
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add a missing 's' for plural form for signals. This fixes the linking
to Signals topic in class references.
Task-number: QTBUG-28450
Change-Id: Ic666e608b4b5b40b1f886ea581e54227e1a94678
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Commit 0696071316 moved away from QDom but
also lost the ability to fill the introspection field of the created
QDBusIntrospection::Interface instances. This commit now generate the
string again as we proceed with the QXmlStreamReader based parsing.
Task-number: QTBUG-26668
Change-Id: I8f406e1f4e9d3e667a8557db69da36cac369ba4f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With the change cff46983a, prepared queries can now store a
named paramater to be used more than once.
When using ?, thus positional binding, there is no named
parameter, thus there is no need to store it.
When prepare is called from a query with ?, it currently
causes an error when the feature QSqlDriver::NamedPlaceholders
is true. Because holders values are called while holders is
actually empty.
QSqlDriver::NamedPlaceholders is true for QOCI plugin only
but the problem is independant of the plugin used.
Adding a test case with a test driver to make the test runnable
without Oracle installed.
Change-Id: I6d7491f7e09a7b62d2d4d216b40fedd67e927e27
Reviewed-by: Matt Newell <newellm@blur.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
OpenSSL changed the layout of X509_STORE_CTX between 0.9 and 1.0
So we have to consider this struct as private implementation, and use
the access functions instead.
This bug would cause certificate verification problems if a different
version of openssl is loaded at runtime to the headers Qt was compiled
against.
Task-number: QTBUG-28343
Change-Id: I47fc24336f7d9c80f08f9c8ba6debc51a5591258
Reviewed-by: Richard J. Moore <rich@kde.org>
Configure will now generate QT_DEFAULT_QPA_PLUGIN qmake variable
to specify the default QPA plugin.
"CONFIG += qpa_default_plugin" statement in application .pro file
will add the default QPA plugin into QTPLUGINS.
"CONFIG += qpa_minimal_plugin" statement in application .pro file
will add the minimal QPA plugin into QTPLUGINS.
Task-number: QTBUG-28131
Change-Id: I12a241005f30b37467d783b50f0369b47e605e68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If parent is null, we now use qqnxintegration->primaryScreen()
This simplifies ctors of QQnxTheme and QQnxFileDialogHelper which now
receive a QQnxIntegration pointer instead of receiving a font database
and a bps event filter.
Change-Id: I3b1ed4d99f738b980a4f19a98618341a14e0c222
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Port Qt 4 implementation. Shortcuts such as shift-5
should now work.
Change-Id: I1d8c4c6c4a903142361996b558ee31c8549fcef6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Set the CGImage format based on QImage::format().
Handle8-bit per component (A)RGB.
Change-Id: I041b0ee53d3943a0aaf9e813eb0a235c4de619dd
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The default is a "source over", but we want to
completely replace the destination pixels. (Which
is slightly faster).
Change-Id: I4916765258a2236f70f58a8e20b06f80739183c1
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
We want the Qt backing store to be in the device color
space by default. This will avoid colour space conversions
when blitting it to screen, at the cost of a potential
loss in color accuracy.
As it turns out, CGColorSpaceCreateDeviceRGB no longer
crates a device color space but rather a generic color
space. (Since 10.4). Create the color space with a system
profile instead.
Accurate color representation needs to be supported
at some point, but this fast path should be the
default.
Change-Id: I7ebb77b36f81f66119d8c2ef464723401ec1d1e8
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Ideally this should not be required since NSWindow
should resize the content view automatically. However,
in the case of modal QDialogs this does not happen.
Add call to updateGeometry in windowDidResize as a
workaround, and remove code which called QNSView::setFrameSize
with the current size.
This will cause duplicate handleGeometryChange calls
in the non-qdialog case, add a test to see if the geometry
really has changed to prevent that.
Change-Id: I29bea23b2ab72f923aeadf8db8cb9131ae177a28
Reviewed-by: Liang Qi <liang.qi@digia.com>
Add handling of the focus chain to QGraphicsItem::setFlags(), so that
the focus chain is repaired (panels pop out of the chain and non-panels
merge back in) when the ItemIsPanel flag is toggled. Add handling focus
chain to QGraphicsWidgetPrivate::fixFocusChainBeforeReparenting for
panels.
Before this fix, you must enable the ItemIsPanel flag before adding
the item as a child to a parent panel, and you lose focus when using
the tab key to focus around a panel after it has been reparented into
another panel.
Task-number: QTBUG-28187
Change-Id: I1d0d81a90697eaf715a8a337c8bf6c2159329e68
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Mostly straightforward, the a11y changes might look a bit drastic, but the
base class QAccessibleTextWidget was already disabled in this case, so we
have to obviously take out its sub-classes as well.
Change-Id: I682ace20d6938688ddb1da23c3463f3c025fab8e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
These macros were removed by 158f39ec78
Change-Id: I2aabef1dd2c9cb3949040c167a4e5cf1a9390ba6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
There are no proper implementations of this API, and as it stands it
only acts to confuse anyone who stumbles across it. It will be better to
revisit the full cross platform orientation API story for 5.1.
Change-Id: Iff7054a32c6e5e4ad0cc0493a5e4ecc35a6ec4f3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
says: "If $XDG_RUNTIME_DIR is not set applications should fall back to a
replacement directory with similar capabilities and print a warning message."
Better warn that not all the guarantees of XDG_RUNTIME_DIR are available,
and push unixes who haven't done so yet, to set things up correctly.
Change-Id: Ie3998e8c1d14e4fdf8d58dfb2932f0ad708fba50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
newer mingw-w64 headers do not support swprintf(wchar_t*,wchar_t*, ..)
any more.
Change-Id: I2fc1fb51ba8d5237149697f77a91abd6469ebb09
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change da54c5e7c9bf7647664a3529a6db487dee94d331 in the qdoc
repository was made to the wrong version of this documentation.
This change just adds them in qtbase and fixes some of the snippets
which were still broken.
Change-Id: Ie9ba57b5a2d20a629aa5f0a492daa207d35b2053
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The link to widget examples in QtCore was added
in 4519d810d1, which made
widget examples pop up twice in generated lists
(once for qtcore and once for qtwidgets documentation).
I'm not sure why it was originally added to that module, but
the snippets in the fridgemagnets example (which was the
example fixed in the commit) has been verified to still work.
Change-Id: I1b349f08349b5499929315d426224ba8638adc8e
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
the "export location" of the linguist tools was just bogus, and lconvert
was missing anyway. the two dbus tools and qdoc were missing, too.
generally, it seems useless to report the paths of some random tools -
instead, just report the install location of the host binaries and let
users figure out the complete paths themselves - this should be ok, as
we decided that distributors are not supposed to do tool renaming any
more.
for the binary path just use the final location, as the files won't be
used before installation anyway. this allows us removing the scary
generic prefix replace from the pc file installs.
and as a side effect this also fixes debug_and_release builds of core
and widgets by not loading various prf files prematurely and thereby
messing up the dir replacement magic.
Task-number: QTBUG-28286
Change-Id: I99de419301fc07fb923959db4bd5cab9072d1c31
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
They are completely unused in Qt, and are a potential source of
compilation errors in application code.
Change-Id: I6dfe2891f3b2365a30048f99c31e8e3a2425e62b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make the same layout of the new graphics view example documentation
as we had before (except by using annotatedlist instead of hardcoding
the links). I've also moved four examples from qtdoc to qtbase so
that they can be included in this documentation.
Change-Id: Ic2202ade119cadd98d036f1bd77e91dae49b5677
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
qt_lib_gui.pri would add an unneeded -lGL, causing the build to fail
on systems with no GL libraries.
Change-Id: I3a49418e1393642e9d97999b79741cc2144a99af
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This configuration variable now assumes its values,
if relative, are relative to the config file that
contains the extraimages variable.
Task-number: QTBUG-28307
Change-Id: I9b34d1f456b31e36ac77401b957b68cd10590376
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The reason for this bug seems to be related to how we wait for
more events in the event dispatcher. We use the nextEventMatchingMask
function, which already in Qt4 showed to have problems when telling
it to not dequeue the event. The solution back then was to
tell it to dequeue the event, and instead repost in front again.
Why this was changed in Qt5 is uncertain (other than it being tempting)
but moving the same code back in will solve the bug.
Note that this bug might also stem from the fact that the run loop
sources we add in the event dispatcher fires before the application
is really ready to show modal dialogs. E.g refusing to execute a
modal dialog before NSAppDelegate applicationWillFinishLaunching
is called will also fix the problem. But this code change is to big
atm, and can easily introduce other unforeseen regressions.
Task-number: QTBUG-28283
Change-Id: I07cd109568c2b9c782cf5120a9eb2ac71128cada
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Once upon a time, the inherited functions, signals,
slots, etc were not listed on the class reference
page, but they were counted and a link to the base
class was provided for them, eg:
2 public functions inherited from QAbstractListModel
39 public functions inherited from QAbstractItemModel
31 public functions inherited from QObject
Somehow, this got broken, so that all these inherited
things were listed on the class reference page as if
they were members of the class. But they liunked to
the documentation in the base class.
This now works correctly again. It simnplifies the
class reference pages a lot.
Task-number: QTBUG-27496
Change-Id: If493da8cbf81634f1344b12094d9a06f8528e8e5
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Because the linguist examples are moved to qttools module, a link
to the hellotr example broke.
Change-Id: I2aeefc143578618396f5be38ed1d52afdd1f7436
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
The tst_qguiapplication creates and destroys multiple instances of
QGuiApplication. Since the minimal platform plugin doesn't report any
theme names, the platform_theme never gets set to 0 in init_platform,
and we end up trying to use or at least delete an already deleted
QPlatformTheme.
Change-Id: I1a41d55b0705c5531c019e60a7a96dac144bacb7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Borrowed some code from QWindowsFontDatabase::createEngine that will
help ensure our fallback options are thorough enough to display say
chinese glyphs when using the QRawFont + QTextLayout combination that
QtWebKit relies on.
Task-number: QTWEBKIT-383
Change-Id: Ie4c1d5ef7d58588afaa436c89a9575ffd646c314
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This makes QT_PLUGIN_PATH / QCoreApplication::libraryPaths() actually work,
as a search path for plugins, when apps look for a specific plugin by name.
To make it possible to write portable code (unlike the current QPluginLoader
unittest), let QPluginLoader figure out the extension, too.
Change-Id: I895d597d7cb05ded268734bc5f313f32d8d12cb9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Since Mac's typically just have one button for their mice then pressing
Control then clicking the button should end it as a right mouse button
event.
Task-number: QTBUG-28350
Change-Id: Iabcac5b315c36cb8cd062c27d7b1506bc066f5bb
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Move the main example overview and use the \group tag convention
to make the list update automatically.
Change-Id: Ib2cc8cf7def9a7f3dce6b7ed6d4958771cbdf5cd
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
we were already installing them into QtCore/private, so turn them into
proper private headers to start with. this cleans up our project files.
Change-Id: I0795f79e03b60b5854de9e4dc339e9b5a5e6fd87
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The examples have been put under examples/widgets which is probably
not correct, since they don't even have gui. The correct fix would
probably be to move them into threads/, but that would risk a lot of
breakage, so the conservative work-around is just to use the correct
relative paths instead.
Change-Id: I36c3aa45056c8825d1991f345ad7d7799e2fa5fc
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Fix the plugin compilation after cd34da5426
renamed the QWindow API.
Change-Id: I3ec4ce9ae2df9a66f6bf24a18277bc59c05d2e8e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
A focus scope has effective focus if one of its children is the focus item,
clearFocus() should remove effective focus from an item and its children
not just from the focus item.
Task-number: QTBUG-28328
Change-Id: I62a292eff000151e50b2f5221e22f326a380fc3a
Reviewed-by: Martin Jones <martin.jones@jollamobile.com>
cosf seems to be defined in the cmath header
for Windows CE, so include it to fix the
issue of not finding the symbol cosf.
Change-Id: I7317668838912325d45be0d4087ae3055940d3cd
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QStackedLayout doesn't have support for QLayout, only QWidget, so
the issue doesn't arise there.
Reported-by: Johannes Schaub
Task-number: QTBUG-27420
Change-Id: I71f8d10a036918c16d8f8c9197a2ec61cd76cf01
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Don't pass the pointer errorMessages_string - 1 to strcmp().
-1 marks the end should not be used for the pointer arithmetic
in get(const char *name)
Change-Id: I5ec239c63f074d104d441511294554f21fd6eccd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
NSPanels have builtin support to work with modal sessions.
Task-number: QTBUG-28111
Change-Id: Ifeb6de03129e77aad744b3989931964c375cdbc7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
On the one hand this doc reads like an overview, but didn't mention
Qt Quick; on the other, the gestures framework is questionable,
and in any case is solidly in the widgets module, not reusable for
Qt Quick. So, just added some comments at the end to make it clear
that Qt Quick takes a different approach. Also changed the relevant
links because the title has changed.
Change-Id: I66a0c0c106f496de26fb8947e90826ef39ccfddd
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Bring Qt 5 on par with Qt 4, prepare for more comprehensive
support later on.
Introduce device independent pixels (dips), device pixels,
and devicePixelRatio. Add high-dpi support to QPainter,
QGLWidget, the cocoa platform plugin, mac and fusion styles.
Dips are similar to CSS pixels, Apple points and
Android density-independent pixels. Device pixels
are pixels in the backing store/physical pixels on screen.
devicePixelRatio is the ratio between them, which is
1.0 on standard displays and 2.0 on "retina" displays.
New API:
QImage::devicePixelRatio() and setDevicePixelRatio()
QPixmap::devicePixelRatio() and setDevicePixelRatio()
QWindow::devicePixelRatio()
QScreen::devicePixelRatio()
QGuiApplicaiton::devicePixelRatio()
Change-Id: If98c3ca9bfdf0e1bdbcf7574cd5b912c9ff63856
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
It's again possible for QWindows and widget windows to go into
fullscreen mode on the Mac.
Change-Id: I7b304a135838394ef0392f89be4f225f2949fad3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The accessibility implementation is unstable and
causes application crashes. Disable until it has
been stabilized.
Change-Id: Ic34361a0ad599c6f92df722499d274fe0655646b
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Add a 'd' to debug builds to allow both release and debug builds
to be used.
- Add .def-files for Debug
- Build all libraries debug/release
- Add description to README.qt
- Differentiate debug/release in qmake.conf.
Task-number: QTBUG-28196
Change-Id: Ib3081004a6ed2ad71d353244154684d2e0ebbc86
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
It is also used in Qt, mixing both is not recommended.
Add to default variables instead of overwriting them.
Change-Id: I895d44d5ea17f98dde9979eea6ff10b98180cc08
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Commit 26db7de13d introduced the
modal session cleanup for Cocoa print dialog before running the
modal event loop for the dialog. Add the same cleanup for Cocoa
file, font and color dialog helpers.
Task-number: QTBUG-28146
Change-Id: Ifeb7c82566db35f0c6654be7762e9aaffbafb900
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The call to glGetBooleanv(GL_FRAMEBUFFER_SRGB_CAPABLE_EXT) in
QGLExtensions::currentContextExtensions() was resulting in an invalid
enum on ES 2 systems. This was not being cleared and subsequentally
being interpreted as a failed texture upload in the textures example.
This enum doesn't exist on ES 2 so don't query it.
Change-Id: I84f9c4b0aa8b11b6036eeed1f9378d110d9ea69d
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The standard resource files where renamed,
so fix the include for qmenu in Windows CE.
Change-Id: Id29dd8e1028cf438f4d483126a74994fc1e310d7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
We should consider the scene-position when we are expanding
moving a rubberband. If the user does some auto-scroll
(Qt should support that itself, but that is another matter)
then the rubberband should not keep the (old) local position
to calculate the rubberband extension, but instead use the
scene-position that was actually clicked.
Change-Id: I04a2df6a1edae8b3587e1ac2104c7fe4ccfb7762
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The buffer count check should take place right after buffers are created. For
some reason, the buffer count value inside libscreen may become incosistent during
the course of the program.
Change-Id: Icbbaf4734eac5b0c5c95bdd93771899f9fcdb7db
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
This change only affects the ANGLE_surface_d3d_texture_2d_share_handle
extension. The patch is necessary to have WebGL running in Qt/WebKit2.
If the share handle is reset, we are loosing the reference to the
EGLSurface and cannot actually reuse it in a different context anymore.
Change-Id: I0138432dd8ff60ea57e7e591cfa2f8db1d324f53
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
-matches the index file and output directory name
Change-Id: I9205a41355fcb3818a93035208c8e25c1c13dcff
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Change-Id: I101310f6bd9bddf0ee9d06a81b9fef805313a015
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
IMO we need to have a list of all the environment variables somewhere,
but this one is especially useful and wasn't documented at all.
Change-Id: I2de09194c5904a9a27066604840ec4be66574fb7
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
When QtBase is compiled with Exeptions it was incompatible
with the other modules compiled with QT_NO_EXCEPTIONS.
This resulted in a linker error with
ExceptionStore::throwPossibleExceptions, one time returning a const value
and the other time without it
Change-Id: I0e0dff61aceeec3cfde119b00ed15f3aa9f12659
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
I remove the widgets examples from the gui docs as they will
introduce broken duplicates (under doc/qtgui/...).
Change-Id: I54255ceaf4187477da3e82f6809be41fb98378a2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Certain QStyle code paths expect the style object to be set. This will
avoid problems when QGraphicsItems/Widgets utilize QStyle for drawing.
Even if things will not necessarily animate properly, such legacy code
won't cause a crash at least.
Change-Id: Ic77cb4ee9820d6c4ec92c7278fd87cb866f5a780
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We will take this opportunity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy, pluginizing etc. without
worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QWindowsStyle directly.
Change-Id: Ic17c7e425535bc5bb3a08620e9059bb0aea5185e
Reviewed-by: Andras Becsi <andras.becsi@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
Configuration file's exampledirs variable already contains the
xml sub directory, snippet paths are relative to that
Change-Id: I627aebade224afdb7bd38f2b1a089a747e49fabf
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
../../../examples/xml/src
doesn't exist, it is
../../../examples/xml/doc/src
Change-Id: I08f0d6d91b2cea7bf313cbcdd50632835e21ae24
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
When moving QMdiSubWindows that contains native widgets (e.g QGLWidget)
inside a QMdiArea, garbage is drawn to the screen. The reason is
that since we use native QWindow backed widgets, QPA will assume
that it does not need to update/scroll the backingstore. But since the
backingstore can be shared among several windows, we need to do this to
ensure that exposed areas behind the moved QWindow will be updated.
Change-Id: I35f4d4069a73ab6cd6d610e25c176c752789a927
Task-number: QTBUG-26162
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
QWindow::screenDestroyed triggers an move of the window to the primary
screen. This causes the screen to be destroyed and shown again on the
new QScreen.
The issue is that QWindow::destroy() hides the window but create()
doesn't set it visible, and this ultimately causes any QWindow to be
automatically hidden when their QScreen is destroyed.
As stated in the comment, it could be the intended behavior that
windows aren't shown automatically on a remaining screen like when
using two screens not logically part of the same desktop. Once the
platform plugins have access to an API allowing them to adjust the
screens of their QWindow, this patch shouldn't be needed anymore.
Change-Id: I7628377c969f79f9eebb3deabaf0470542d68a9c
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Since QtOpenGL/QGLContext is implemented in terms of
QtGui/QOpenGLContext which has stricter requirements about how it's
supposed to be used, we need to apply these requirements to QGLContext
as well.
This change adds QGLContext::moveToThread(QThread *) and documents it as
a necessity for making a context current on another thread.
Also introduces QGLPixelbuffer::context() to access the QGLContext of a
pixelbuffer, and made QGLWidget::context() return a non-const
QGLContext, since there's no good reason why it shouldn't, and it leads
to less const_cast clutter.
We could have introduced a backdoor in QOpenGLContext instead, making it
loosen its requirements, but that would have made it harder / impossible
to fully support threaded OpenGL in all the platforms.
Task-number: QTBUG-22560
Change-Id: Ibb6f65f342e7c963e80cc42ab5664c5f1cab30b0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
If QGuiApplication has not been instantiated, this function would
crash. Change it to return NULL pointer instead.
Change-Id: Ia3d27019daa436d5243c9cce757a132d96aae112
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
... with \li in documentation lLists.
Change-Id: I51f5f4f848ec1b5a379647b32772668c24ff5992
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Since Qt Widgets was moved from Addons to Essensials, take the
old description for the Qt Widgets addon and put it in the module.
Change-Id: If955747999d48fe09fff00a9c78e38ccbcf9a493
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Make sure qdoc generates a correct overview for the module.
Change-Id: I6ea95638459201a0bb09f2e645173ade3a36f0e0
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
qdoc now finds an overview and the concurrent namespace.
Change-Id: I2cd15bc19091f53bd2bb98919e685d49d473dbec
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Now things that are marked internal oe whose parent
is marked internal won't appear in annotated lists.
Task-number: QTBUG-28274
Change-Id: I14ea96e223640cad45e7e4249a3e1fc0642bd9c3
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Also make it read less as a porting guide from Qt 3.
Change-Id: I78f93c643d236e13ba4ef76eeea1a98be4573def
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
We generally expect styleObject to be set during style
draw calls but this isn't always done, especially
legacy code outside Qt (for example in Qt creator).
Create a temporary stand-in QObject. This will disable
scroll bar animations.
Change-Id: I781967fe28f68f5952b368cd56be980b9e270ecd
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
NSOpenGLContext expexts an -update call whenever the
physical position of the view it draws to changes
on screen. Since we don't get geometry callbacks for such
views when the parent view moves, we need to
register a special notification for that case, and
tell Qt that we need to repaint the QWindow that the
view is backing.
This case does not hit very often, but is evident in
MDI applications where the subwindows are OpenGL
backed QGraphicsView widgets. Dragging the subwindows
around produces garbage inside the windows.
Change-Id: I1b162470b03cca6ed722c6c54080459f2c5e91d9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Although SSE2 support is detected at runtime it still may not be
available at build time, so we have to ensure it only uses SSE2
when it is available at build time too.
Change-Id: I86c45a6466ab4cec79aa0f62b0d5230a78ad825a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The Plastique style no longer exists in QtBase. All the references have
been updated to Fusion, and the obsolete screenshots have been removed.
Change-Id: I771a9ecf23b82965c7b3c41a40945cf051cb5f3a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
In blackberry, activation events come through the navigator,
but we might not have a navigator.
Change-Id: I0d9e1a08336aa403035fdf00be46d839a83f4b58
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
* (i.e. do not mention Kinetic)
* Add some relevant references to Qt Quick
* Refer to QMetaType::Type instead of the obsolete QVariant::Type
Change-Id: I82b69250c933c7e54dc0c268fa6ce4379726fb0d
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
(Currently, the Qt5 windows packages lack the tiff and mng plugins
from qtimageformats because of this issue.)
If Qt is configured to use its bundled zlib, it is compiled into
QtCore, and the public symbols are exported so that it can be used
by other Qt libraries. However, after modularization, this did not
work for libraries outside qtbase, since they did not have access
to the headers of the bundled zlib.
This commit fixes that.
Ref. also 1f461ac45b
Change-Id: Ie986f47e00fd0c16f2ba04d27f4258a20d61b260
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is a second update, which fixes the
"All QML APIs by Module" page, I think.
I expect there will be more insifious places
where this problem will pop up. qdoc must be
dragged, kicking and screaming into the
modular age.
Task-number: QTBUG-28036
Change-Id: I8dd4733a2b0aac9bab3cb2066b6dbf139a8e98a6
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QSessionManager was already in QtGui, but not usable since the only API
to get to it was still in QtWidgets. Session management isn't related
to widgets, it also applies to QML apps on the desktop.
The virtual commitData and saveState methods have been removed,
given the two signals which exist since 4.2, and an additional
isSessionSaving() method was added instead.
Change-Id: I8099e70df133303e74456706827da21f013fcc6a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Remove references to the obsolete CDE and Plastique styles, choose
screenshots from more modern styles, and revise the table so that
screenshots in the same column are from the same style.
Change-Id: I20d5944ab62d8a6965fb49339dede90624c520b3
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
QWindowsStyle is being made internal. Use either QProxyStyle for
customizing existing styles or QCommonStyle to implement full custom
styles.
Change-Id: Ic81696abc61a3c012a3775efc0b4fba2e1dab4bb
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This assert has become invalid since commit 40fef403. After that commit, the
'origin' mentioned by the assert is not necessarily the first item of
cachedItemsUnderMouse, since it origin can be reassigned at line 5735.
Change-Id: Ibc0739b9fe31be3cc74110225940e9e173f585e0
Reviewed-by: Bernd Weimer <bweimer@rim.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
The name of the .qhp files seems to be generated from the name
of the .qdocconf, not the value it has in qhp.QtTest.file
Change-Id: I12645cb254991006c920234ec966e2fa220cb595
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Change-Id: Ida190e8b9c1ff47a6f54a5bf68673ab50a2f1bfe
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
User applications are those that users run directly, whether it be for
development or not. The executable binaries that the user does not
usually run but is still required for proper functioning are called
"program executables" in Autoconf and they are placed in libexec.
This commit adds support for "program executables" in Qt by adding the
-libexecdir option to the configures, the qmake variable
QT_INSTALL_LIBEXECS (note the plural, to match all other properties),
and QLibraryInfo::LibraryExecutables.
At the time of this commit, the only expected "program executable" is
the QtWebProcess, the WebKit2 helper process from QtWebKit.
Change-Id: I66c3a3e0cf7f9d93b5f88f55f18e957faff608fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Added a section motivating the use of Q_DECLARE_TYPEINFO to mark
shared data classes as movable types.
Change-Id: I26664500aef7d83d779d90f97f3f2b0043966480
Reviewed-by: Casper van Donderen <casper.vandonderen@gmail.com>
This is consistent with QtCore and QtSql landing pages.
Change-Id: Ibea45678a6952b39d24483bad1ee44f562699d1f
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Although SSE2 is not used, texture.cpp does not protect calls to these
functions, support for SSE2 is checked at runtime so the code needs to
be compiled in.
Change-Id: Ie14d0ff6b75448e480236d5d30254f107735b77f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Under QNX, QProcess was not inheriting the parent's file descriptors. This
patch fills in the fd_map array, containing the file descriptors to be
inherited, which is passed to spawn(), accordingly.
Change-Id: Ia160abda88c1ffede877301aeae93a97c2b35320
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Sérgio Martins <sergio.martins.qnx@kdab.com>
Filtering touch events depending on Qt::WA_AcceptTouchEvents
is not trivial. I thought about doing so in
QWidgetWindow::handleTouchEvent but the target widget (not
window), which has to be checked, has to be obtained using
the primary touch event's position etc.
Thus that is not part of this commit and will be done in a
followup.
Change-Id: I876ee72acd7fdfbe46da61c6eb3c5891ea319cd8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
If (*nglyphs < len), stringToCMap() sets *nglyphs to len and returns
false immediately; the caller then must resize the buffer and re-try.
However, QFontEngineMulti::stringToCMap() doesn't update the nglyphs value
and thus the second call would fail, too. This is quite unexpected.
Change-Id: Id2cce7b9faf7706c382fccf023e1b7affa9a10be
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This is a first attempt at fixing the problem, but
it probably is not the entire solution. The problem
requires adding attributes to the index files and
then reusing them when the index files are read.
The same problem will be affecting the module
lists themselves, but that is not fixed in this
update.
Task-number: QTBUG-28036
Change-Id: I8593d5b9446e51a5204b6c71f8c4f2b63f445972
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
* Mark all Open GL classes with \inmodule QtOpenGL. Otherwise, they
weren't listed in the list of classes.
* Remove a reference to Motif
Change-Id: I75680712b212cf46b869014d3678b56d022c6323
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
As 672e7c875e did changing pos() to
position() and setPos() to setPosition().
Luckily there's not much code that uses these.
Change-Id: I1e1982f00412a22bd376e667a5e8c30b6149f9b5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Fusion does not depend on Windows
qfeatures.h regenerated from qfeatures.txt
(QT_NO_LIBRARY and QT_NO_STYLE_FUSION were missing)
Change-Id: I5e650a826abb788c7ffb1f0f28d9bbb2d357b7a8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is an enabler for https://codereview.qt-project.org/#change,40381
Change-Id: I2c2fdefab041dc9332816aefbe85ff66c275ca63
Reviewed-by: Karsten Heimrich <karsten.heimrich@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Change "else" case to support compiling on 10.7+
and deploying on 10.6
Task-number: QTBUG-28060
Change-Id: Iaaeaaefe98083863ed750c7cb320db02e16543af
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
When hiding any widget that is not a panel, it is correct to clear
subfocus. In case clearFocus() has been called, the result is that
focusItem() / focusWidget() points to 0, which is correct. Upon
reactivation, nothing gains input focus. When changing focus, the
following setSubFocus() call will ensure subfocus points to the new
widget.
When hiding a panel, however, it's essential that subfocus within
that panel is not cleared, otherwise, when re-showing the panel,
nothing will have focus, whereas the expected behavior is that focus
is restored to the last item that had focus, i.e., the focusItem()
a.k.a. subfocus widget.
Task-number: QTBUG-22256
Change-Id: I84d849a505764e074e1369fef923cef1ad5c0b1e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Placeholders might go to a different position in translated
strings.
Change-Id: Id6a84ea931dc0487bd72eb8d01669369a3dce9c6
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This change makes it possible to use the QML JS debugger with KDE
applications.
Change-Id: Id5838fa34dcb8b54127abc6da6fe7c2e9a5a1c2e
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QGLTextureCache has a read write locker to protect texture lookups.
However, even calling QCache::object() might modify the cache, causing
race conditions, since it modifies the priority order of the objects in
the cache. Therefore, we need to protect it with a QWriteLocker instead
of a QReadLocker.
Task-number: QTBUG-22560
Change-Id: I46fffc624ace27e25fb100f865e1df0a19b9093d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The line has been removed, giving a globally cleaner appearance. Also,
the label font size has been increased to normal size.
Change-Id: I3ef9d59ca54755c6fa158e943e4a6ce94eb05065
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
If QCommonStyle is taking the place of a common base style,
it should support PE_IndicatorArrow*.
Change-Id: Iec08a37bf3a501bcca61751b11e907999f538e34
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Added a method to QNetworkReplyHttpImplPrivate to check whether the
HTTP operation used in the current request allows for caching. This
should only be the case if the operation is GET or HEAD. The response
to all other request are not really cacheable and should be disallowed
from caching.
Change-Id: I7c31bae42814d157a800d43565e5cb9adfb879f7
Task-number: QTBUG-28035
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
There is currently a symbol clash with a duplicated
isBuiltinType() in ActiveQt's dumpcpp-tool, which breaks static
building. Reuse the function.
Task-number: QTBUG-28131
Change-Id: I4985e8405924754aa613311ca3f06d6ba29758b8
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
We have qdoc configurations for the different qtbase libraries and
modules now, which specify e.g. "../../../examples/opengl" for the
exampledirs. That means that qdoc finds examples like
"2dpainting/2dpainting.pro" which is then installed into
"[QT_INSTALL_EXAMPLES]/opengl/2dpainting/2dpainting.pro". (At the moment
even into "[QT_INSTALL_EXAMPLES]/qtbase/opengl/...", which will be
changed to match the structure in source.)
In order for Qt Creator to find the examples, qdoc must write the path
behind [QT_INSTALL_EXAMPLES] into the example manifest file. This patch
introduces "examplesinstallpath" that allows qdoc configs to specify the
missing part, e.g. the opengl qdocconf can add
examplesinstallpath = opengl
to tell qdoc that the examples will be installed into
"[QT_INSTALL_EXAMPLES]/opengl/"
Task-number: QTBUG-27801
Change-Id: Idf518e16d3ca0f9522b084e92f34725b93e9d11f
Reviewed-by: Martin Smith <martin.smith@digia.com>
QMacStyle was made internal in 27aa41, but was accidentally
left public in the docs.
Change-Id: Id7841718af3a21bbbda3102858d1a11bccb8179b
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
Unused and empty. QTextCodec and the Unicode overview
contains all relevant information.
Change-Id: I779ba4dea69a88802e34541e4ba44215b5d69c2a
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
By changing textOption() to return a const reference we will get a
performance increase when accessing this function internally.
Task-number: QTBUG-28193
Change-Id: I65b594d844ebaee6d72f4a95d11bd2c5e801fab4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
We should not directly use the palette as it looks
weird on mac.
Change-Id: I2062bd43a8b28875330d9f8cc0eaa4069f3a43f6
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
The annotatedlist commands are not needed as QDoc automatically
generates the group members.
Change-Id: I462bb65bd5f29c1761799d3d60acab0bd4886075
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
If we are reacting on the sectionResized signal and we call
setDefaultSectionSize we should ensure that we are not moving
the mouse-cursor.
This is an improvement of f8f6acb05c
Change-Id: I1adee7821bc8fcc9633f692bfd515f2c458b12c8
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This changes the tristate checkbox to look more distinct from the
disabled checkbox.
Task-number: QTBUG-27661
Change-Id: If0921c91d27b62552cbcf86563eed1b75e800478
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Since the documentation doesn't mention the search should be done by language only,
consider the current behavior incorrect.
As of now, it is possible to get a list of locales by Country or Script as well.
Also fix countriesForLanguage() to be in-sync with matchingLocales().
Change-Id: I6a09ca459120143565fa6099d2b823df1fed7c25
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
Some of them were incorrectly spelled (for a while)
Change-Id: I871968e3bbdd2172f4c4dfb6e74729c05e7e8e01
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These Qt3 legacy application types do not match the application types
available in Qt5. Thus, the decision was to kill the confusing and
mostly useless type enum. Use for example qobject_cast instead to find
out the application type.
Task-number: QTBUG-28093
Change-Id: Ia8cf7c3ea98a3cea27f74760d62e519ea10bce9f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit does not remove the actual images, since they
are referenced from many other places.
Plastique style seems to have been used often as a style
for showing a screenshot of a widget (probably because it
has been available on all platforms).
When fusion style gets its gallery with images, the references
to the plastique images should probably be replaced with
references to fusion images.
Change-Id: I288c06df2c5e1f3a212b873ec0f087e119b895b0
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
In 0696071316
the ObjectTree class was removed.
Change-Id: I9c7a505a597e7c2ed9243468faee931a481b1b22
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
In 3986b51274
these two functions were removed.
Change-Id: Ib38692099aee8f71a8ae0f7949b8fa90eddf6009
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The determination of top left and bottom right model indexes for the
selection used logical indexes, which resulted in selection truncating
itself if the first or last row or column had been moved to different
position on the table. Changed the logic to use visual indexes instead.
Task-number: QTBUG-28009
Change-Id: I4eb9dab690dafda9d2ab7c452dd6271fad70cb30
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When we get a leave event we peek ahead in the queue to see if there's
an enter event already pending. If so we use
QWindowSystemInterface::handleEnterLeave() instead of two separate
window system interface events, so that you don't get leave and enter
events for the whole parent chain when moving the mouse cursor between
two neighbouring native child widgets.
We skip VIRTUAL events as they are generated for parent windows, and we
only care about the bottom-most window that is being entered / left. Qt
can take care of the rest since it knows the QWindow hierarchy.
We need to not skip leave events with detail set to INFERIOR, since Qt
expects to get a handleEnterLeave() when the mouse moves from a parent
window to a child window.
Task-number: QTBUG-27550
Change-Id: I7457d2e59d8b694081f2e43a16cd2e58d769624e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Correclty replace macros according to the C++ standard.
Use the correct replacement method also to evaluate
With this moc correctly processes boost headers.
Task-number: QTBUG-27546
Change-Id: I001b3054c5fcdc34d46cfa53d1387bd19436f361
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Arguments in function macros are only expanded if they
aren't used in conjunction with a # or ## operator.
Change-Id: I8c80e11902a592128504c4637545e75866566965
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
According to the spec, we should ignore whitespace tokens
at the beginning and end of the macro definition. In addition,
whitespaces after a # and around ## should be ignored
Change-Id: I830d0f4aaed3bcfac345d7da6df65693ec3315b8
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Make sure we always emit the destroyed() signal before
we delete our children. This wasn't working correctly
for QWidget based classes, as the QWidget destructor
deletes all children itself.
Task-number: QTBUG-24672
Change-Id: Iecdff3489196271177edfeba1c4a2c5800e255af
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This patch fixes the manual move of sections when auto scroll is on.
It is done in QAbstractItemView::doAutoScroll by letting the
qheaderView use its parents scrollbars if they are childs of a
QTableView or QTreeView.
Task-number: QTBUG-993
Task-number: QTBUG-1103
Change-Id: I70d999d9a07c3566e42d01cc5ebb47a69a83d9d4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There are no semantic changes in this patch. We just avoid
many calls to horizontalScrollBar() and verticalScrollBar() by
storing the result of them in local variables, that are used
instead.
This is just a prepare for auto-scroll when a user is moving a
section.
Change-Id: I4b3d3ecbf3a29992e6f578d4b0442d7f494125e4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Child QCocoaWindows don't have an assigned NSWindow, but still get a
QNSView as backing store. That QNSView is added as a subview to
the parent window's QNSView. That would leave an unmanaged QNSView
alive.
Change-Id: I10f57fb971f7aa1e278bb0af4217052d1e4bb0bc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The resons for this bug is that Qt can share the same backingstore
between several windows (if they exist in the same hierarchy), but
this was just not supported by the Cocoa plugin.
This patch will make sure that we pay attention to which window
the QCocoaBackingStore is told to flush, and forward this information
to the QNSView that backs it up. Inside the views drawRect
function we then take some extra steps to get the correct sub-part
of the possibly shared backingstore image.
This patch also does some effort to ensure that we recreate the
backingstore image as little as possible, as we can often get
several resizes to the backingstore before we actually draw anything.
Moreover, by being a bit careful on how we tell UiKit to update
the view upon a flush, we can minimize the number of drawRect calls
(and then CGImageRef creations) we need to do. This patch actually
ends up improving resize/repaint performance a lot as well.
QT-BUG: 27390
Change-Id: I2c2a26b149fa855411b6bff8b9cc9a61694ae72f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This change enables receiving the native NSOpenGLContext that is used
by a QOpenGLContext. This clearly is non-public api that is only meant to
be used as a last resort for cases where it is really necessary to
get hold of a native context object.
Change-Id: Iea7c6abb458acc7aa15926052673270d25d1d9d1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy, pluginizing etc. without
worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QMacStyle directly.
Change-Id: I44a2f5ee3fe08ecc837b593a2a2737eb90e8c267
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
If the include of egl.h does nasty things with X11-defines
(this happens with the imx6 gpu-drivers) errors are avoided if
the include of XInput2.h is next to the other X-includes,
and not after include of egl.h
Change-Id: I182d0e1fcf3fa3e6abce880d34e63cc1d2ce8ed4
Reviewed-by: Laszlo Agocs <lagocs83@gmail.com>
As of Unicode 5.1, some punctuation marks were mapped to MidLetter and MidNumLet
for better URL and abbreviations handling which caused "hi.there" to be treated
like if it were just a single word;
until we have the Unicode Text Segmentation tailoring mechanism, retain
the old behavior by remapping (some of) those characters back to their old values.
Change-Id: I49dea6064f2ea40a82fc0b1bc3c4f0b4e803919f
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
...and add one where we used to say that QWidget is "the base
class of everything that appears on the screen".
Change-Id: I573d8162fd69b7bfc5b0305f3ed6530129386b78
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The QLabel documentation for instance is quite confusing since it talks
about rich text without saying what it actually is. The QTextEdit
documentation can also be improved by being more explicit.
Change-Id: Ie718d170e18a0b713fe567fb707330d0085fb9e4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Default to Regular/Normal instead of Medium in QFontConfigDatabase.
Requesting Medium as default was fine until the font actually provided a
Medium font, at which point it was selected by default.
Tweak the buckets so that Medium has preference over Bold when DemiBold
is requested. They will have to be extended for Medium when QTBUG-25814
is resolved.
Change-Id: I111b7f99083d50c3e8264f84f10a997f619ef4b3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The image was outdated and didn't really add much information.
Also bring back mention of QWidget here.
Change-Id: I9de95a4ae7eaf0352418bea5732b5e9a763c73c2
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy, pluginizing etc. without
worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QWindowsMobileStyle directly.
Change-Id: Id64f3dabff38db7864e235c79b2e9276379f4ba4
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy, pluginizing etc. without
worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QWindowsCEStyle directly.
Change-Id: I6b3c0554e7a2a4a5f0027f4ea1342fd332af89ad
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
In change 1582407fc7, the Q_WS_MAC
code path which disabled drawing cached glyphs for any transform
was removed, as was the comment that scaling and rotation wasn't
supported by the Mac font engines. This obviously broke transformed
text on Mac, so we need to put it back.
I put it into the font engine itself where it belongs, and I kept
the somewhat confusing naming convention which is used in the
paint engine to minimize this patch. I'll clean up these function
names in a future commit.
Task-number: QTBUG-27362
Change-Id: I4fc6a503eedd4b1ebaf3ee659d948f997f433338
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
When the floating-point behavior in MSVC is set to "precise" (default),
assigning nan numbers to a float causes the bit pattern to be altered
(only affects 32bit builds). We should therefore not assign the swapped
value back to a float and use it.
Task-number: QTBUG-25950
Change-Id: I7b6cc4d546e5c8aeafdede749056358b7d639ec7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Adds the fullscreen button on Mac OS X. Has no effect
on other platforms. Regarding the name I dropped the
"Mac" prefix (like MacWindowToolBarButtonHint). Other
platforms can use and we don't want to accumulate "Mac"
API's.
Change logic in QCocoaWindow check for this flag instead
of using WindowsMaximizebutton.
Change-Id: I9f2db75e8e71b3da36777c7e48852eda3ce9d534
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Somehow this bug managed to stay hidden until the introduction
of QFusionStyle.
Task-number: QTBUG-27675
Change-Id: I86b049b869e9f2951426dc67a485ad7c60ef1403
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
We will in any case not be able to support this in Qt 5, so best to just
remove it to not give any false impressions.
Change-Id: Ib52e86007b9e6483bd973f13502b078792a9fa40
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Bare QKeyEvent missing some useful info for input method.
Use new construct of QKeyEvent to create extended QKeyEvent
Change-Id: I8c89e80e7329b92e3e04d5fe52d07c6f6f9e006f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The Advanced tab shows CUPS options and duplicates some of the settings
in Page tab. These duplicate settings cannot be kept in synchronization
and thus the Advanced tab causes confusion which settings are used.
Remove the Advanced tab because the same settings are either available
in Page tab or can be configured in system printer settings.
Change-Id: I2dc2bf8b3b84dd19f24b2e6c1c9539c925d5d725
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
It is possible that the widget which is to be shown full screen has a
0x0 geometry if an empty layout with 0 margin is set there. In that case
the widget should not be hidden.
Task-number: QTBUG-27602
Change-Id: I87fd20cc3a5bac89ceccdf639780c4bc721ce860
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Since the OpenGL paint engine is now OpenGL 2.0 based, we need to save
and restore all GL state to prevent it from being clobbered.
Task-number: QTBUG-27020
Change-Id: I39831e074aa818583df34c4a88b13be559d0231b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
-"qttestlib" should be the directory to match the name of the .index
file. The names affect the cross linking and the "depends" variable.
Change-Id: Ibd35e7a089c78c043527bd72741e57d72daa83d8
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Requested by Allan Sandfeld Jensen for QWebkit, which needs to register
upfront all the mimetypes that a given plugin can handle.
Change-Id: I64b8d39c7988adfc7db4ed8bfdc73acd16e999da
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since it is declared in qglobal.h, we do not need to re-implement the
hack here.
QTOSTRING was only defined if QT_NO_META_MACROS was defined, so
practically not safe to use in other places.
Change-Id: Ie5b07d0fa7537ba79380b882a4c822583ee5635e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With -std=c++0x, MinGW headers doesn't declare some common functions
we're using in qglobal.cpp.
Change-Id: I0ba68ee73b1099c8591a578f06f58db316631e8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
geometryengine.cpp: In member function 'void
GeometryEngine::drawCubeGeometry(QGLShaderProgram*)':
geometryengine.cpp:159:93: warning: cast to pointer from integer of
different sie [-Wint-to-pointer-cast] geometryengine.cpp:167:95:
warning: cast to pointer f rom integer ofdifferent size
[-Wint-to-pointer-cast]
benchmarking.cpp: In member function 'void TestBenchmark::multiple()':
benchmarking.cpp:85:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
benchmarking.cpp: In member function 'void TestBenchmark::series()':
benchmarking.cpp:120:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
qstandarditemmodel.cpp:2717:45: warning: unused variable 'd'
[-Wunused-variable]
qxcbconnection.cpp: In member function 'xcb_timestamp_t
QXcbConnection::getTimestamp()': qxcbconnection.cpp:930:40: warning:
suggest parentheses around assignment used as truth value
[-Wparentheses]
tst_qguiapplication.cpp: In constructor
'BlockableWindow::BlockableWindow()': tst_qguiapplication.cpp:340:9:
warning:'BlockableWindow::enters' will be initialized after [-Wreorder]
tst_qguia pplication.cpp:339:9: warning 'int BlockableWindow::leaves'
[-Wreorder] tst_qguiapplication.cpp:342:12: waring: when initialized
here [-Wreorder]
tst_qsqltablemodel.cpp:570:10: warning: unused parameter 'value'
[-Wunused-parameter]
tst_qabstractitemview.cpp:1546:8: warning: unused parameter 'index'
[-Wunused-parameter]
Change-Id: I49c88547182e4669cfde2c2536403fc5573ca2da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
...just like described in http://www.unicode.org/reports/tr35/#Likely_Subtags.
This is much more effective than current "guessing" algorithm
+ makes it possible to instantiate a locale by the script or territory code only.
Change-Id: I674f8476e65b01c56960b6e83a1a346df0715274
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This patch adds some missing codes (two-letter ones only),
removes an outdated ones, and updates some names.
The legacy language codes are handled in QLocalePrivate::codeToLanguage()
(fortunately, there are only 4 of such codes).
Change-Id: Iff50aecd1c762b6399cd151aebb955f341d366c6
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Just like in resizeSection, moveSection, swapSection (and more)
we should call update on the viewport after setDefaultSectionSize.
Change-Id: I88154138d98f644050054d7cd287a0addd9a9cf9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
setDefaultSectionSize should respect auto resized sections like
QHeaderView::resizeSection(). When setDefaultSectionSize is called
we should process a possible pending resize and afterwards we
should do a (delayed) resize of the sections (if we have autosized
sections)
Change-Id: Ie09e6f073c944b58693ffbbd1d1a8b60104c1a55
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We cannot rely on the previous sizeHint and we also call it
in QHeaderView::resizeSection(). There seems to be no reason
not to call it.
Change-Id: Ia473fb7163369aafa5c019ff97a030f9f54a33d9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This makes it possible for uic to handle QTreeWidget that in
the designer has one or more empty headers.
Before the right(most) empty items where there wasn't a
non-empty header to the right of them would not be visible.
The other empty items - where there was a header to the
right of it would not be empty but initialized with a number.
This patch ensures the same behavior that the QTableWidget
is having.
Task-number: QTBUG-18156
Change-Id: I19bfd3307befe46a1af2d6a3275f7446a15b3442
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It warns that it is deprecated if used, but it is currently not marked
as such.
Task-number: QTBUG-28082
Change-Id: Ib0bf034c188650ae77eb5550769e032490d19783
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy and even merging style
implementations (XP & Vista) later on, without worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QWindowsXPStyle directly.
Change-Id: Ib4fec35c2fcb3b5a193537a1de5b6e26fbbe0a06
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy and even merging style
implementations (XP & Vista) later on, without worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QWindowsVistaStyle directly.
Change-Id: I8b320036e241e877fc9bb5f4084cc6e63756cbc4
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
On the BlackBerry platform, applications run in a sandbox. They are
not allowed to read or write outside of this sandbox. Hence in
QSettings there is no use for the system scope and differentiating
between organization and application. This change will also improve
performance.
Change-Id: I79fee0140595385f3d33bd89fe5daa36b04836bc
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Alan Alpert (RIM) <aalpert@rim.com>
This change ensures that BPS events are delivered to the proper
channel even if the application code would change the channel.
Change-Id: Id44efbdd99350c639e391161dd89b8d422c4b330
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Jeff Kehres <jkehres@rim.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Add a flag indicating user input events to the event type and
leave those events in the queue if
QEventLoop::ExcludeUserInputEvents is set.
Task-number: QTBUG-27595
Change-Id: Ib41b826ef3be19253cd582d9894dd7c87953711f
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Since we are using a hidden window in order to make the context current,
the viewport will end up with an arbitrary value. By setting it
explicitly we ensure compatibility with Qt 4.
Task-number: QTBUG-28115
Change-Id: I69fb5efda2b274b539c3d3b9fa842a2d32ad70b1
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The bounding rectangle may have negative width or height when a
graphics view with text is rotated in certain angles. Make
sure that the image width and height are positive, otherwise the
context will be null and the following messages can be seen in
test logs:
<Error>: CGContextSetFontSize: invalid context 0x0
Change-Id: I10f83f6909035fb3c4ac456123cf1922eaea7c73
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The flushWindowSystemEvents() was added to send the geometry
event synchronously. A side effect was that all input events were
also sent.
We don't want that. We're probably in setGeometry() because some
other input event brought us here, and it's still in the call
stack.
One crashy example is the static method QToolTip::show() which
uses static variables([1]). If we process input events while the
first QToolTip::show() is still on the call stack, it will trigger
a second one, deleting stuff ([1]) that the first invocation will
still need once the stack unwinds.
Change-Id: Iea22419a7f386d6b6231404666092340dfd1afed
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy, pluginizing etc. without
worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QFusionStyle directly.
Change-Id: I37d8acb13b6fd328a9cd53c74df971428bbbe443
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
1. cloneWithSize() may return 0
1bis. QRawFont::setPixelSize() may ivalidate the font (due to 1.)
2. using the data obtained from a temporary QString is never safe!
Change-Id: I0cd5f807d8077ef5112704e475f1904bd6fc4b1b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Instead of assuming that all events should be handled when
a user event occurs, userEventSourceDispatch has to use the
flags used in QPAEventDispatcherGlib::processEvents.
Task-number: QTBUG-27595
Change-Id: Ib13607f89f7d3207ec83ab26f7d59b3c59a28c4e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Print Engine key PPK_SuppressSystemPrintStatus was added in Qt4.1
for Cocoa dialog to suppress the progress dialog. In Qt5 all cocoa
code has been removed and this key is now unused.
Change-Id: I3a91e9651e16f81611a9a736163f76acf9f20096
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
If ERREXIT2 is called in jpeg_create_decompress(), SIGSEGV occurs with
no error message. ERREXIT2 macro uses jpeg_compress_struct.err to handle
error case.
Change-Id: I8517a4d6f6e6aa4c1c59cd1aaea435554cca7ac3
Reviewed-by: Jørgen Lind <jorgen.lind@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Actually, this broke using QXmlStreamWriter with any codec
where characters in the ASCII range have a different encoding
than the ASCII standard.
This was a regression from 558fe9383ba0aecbec09cc411c0ebab132aac137
Task-number: QTBUG-23310
Change-Id: I75bd013e9d5de53da564a76c2f06e95ff35303a8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Assign the baseStyle member before calling setParent(), because that
will trigger ParentChange event and thus calls ensureBaseStyle(). The
baseStyle member must be set at that point, because otherwise it will
start creating a fallback base style.
Change-Id: I3522e41bb6b82e3fe2e7790d53a53978c18a027a
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Fallback to Gtk for unknown desktops, which should be suitable
for most cases like XFCE.
Task-number: QTCREATORBUG-8254
Change-Id: Iaf9959f75852e03a83b5af7d0dead01ef657d678
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
CreateTexture will fail on zero dimensions, so just release old target
and reset dimensions when resetSwapChain is called with zero size area.
Task-number: QTBUG-27994
Change-Id: I1e500c4fd4b92f7d9ea2a49a44f3fb930b575cd1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Get rid of the + 1 in addition to the ascent and descent.
Task-number: QTBUG-27658
Change-Id: I8721226a034099ebe348cad3c49ac711c7fe44b9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
When we call setModel persistentHiddenSections are no longer relevant.
It contains indexes from the previous model.
This solves:
Task-number: QTBUG-18196
Change-Id: Ida02fa63a915695e3730fd63995ac5f8520ae827
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example some styles could be even separated out of QtWidgets and be
provided as plugins instead.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QGtkStyle directly.
Change-Id: Iea1f7ebc80949d29f02733f81674355578e2e4fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This is useful for canceling a long running sql query.
Note that it needs support from the individual drivers.
Change-Id: Ia170a70487ff4ee13c85f12bc13e62fb198617fe
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Task-number: QTBUG-27669
Task-number: QTBUG-27665
Change-Id: Id7eb8092076a57a755a53d1eb5c46d706756ca81
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
c241d8921e renamed the methods but kept
the old ones "for a week or two" at Thiago's request.
Change-Id: I0747c032b549e45f6c8201db577d84863f39f599
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Added prepare_docs to qt_build_config.prf (it was added
directly in configure in the source branch)
Conflicts:
configure
tools/configure/configureapp.cpp
Change-Id: I1337c69fc62b1c934e3e39b4409e4857440c9db8
Minor spelling and editorial issues
see remarks J.Pasion 30 Oct.
Corrected syllabifying error and minor punctuation issue
Added link to Qt Core in introduction
Change-Id: I1516c94c7f9b70125801ab7f9dfeeaed94db6d91
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The painting bug that we are working around/fixing
here has been observed on 10.7 as well.
Change-Id: Ic29421bcc84405afa085af2f0ed2bc554c684f98
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Teemu Katajisto <teemu.katajisto@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
...with a generated one in a way similar to what
http://www.unicode.org/reports/tr35/#Likely_Subtags suggests.
The supplemental/likelySubtags.xml contains all the required data.
This changes some default countries to a most-expected ones.
Change-Id: I920a5623601d8661a943e78197d3bcc838191483
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Previously, the screen name was used, which contained the
display name. This was changed to return the xrandr-name.
Task-number: QTBUG-5416
Change-Id: I560143d6d459a8051c9640079cf7d39a3caebfec
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This commits adds a -qmldir configuration option for the configures to
allow the user to change the default location (it defaults to
$archdatadir/qml).
It adds a QLibraryInfo::Qml2ImportsPath value for
QLibraryInfo::location, a qmake property of QT_INSTALL_QML and a qt.conf
configure location entry "Qml2Imports".
At the same time, it makes the qmake .prf files dealing with QML plugins
be the QML 2 version. Those files are new in Qt 5, so we have the option
to choose which version we want to use.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-October/007136.html
Change-Id: I8c1c53e8685a5934ed0a9a42ba5663297b81a677
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Remove QApplication usage in qcocoasystemtrayicon.mm
Move qt_mac_cg_context from qpaintengine_mac.mm to
qcocoahelpers.mm to make it available in no-widgets
builds.
(Move qt_mac_colorSpaceForDeviceType as well; color
space support needs to be cleaned up later on.)
Change-Id: I724fdb09538d65eae56c26165f3ba53b6814ea78
Reviewed-by: Liang Qi <liang.qi@digia.com>
The error and message handlers used by the freetds library were getting
reset to back to the default every time a database was opened. The
Qt TDS SQL driver was calling dbinit() from QTDSDriver::open(). This
had two problems:
1. dbinit() would reset the error handler previously set by a call to
dberrhandle(). A db error would then cause the application to
abort.
2. freetds expects dbinit() and dbexit() to be called symmetrically.
Opening multiple database connections would result in freetds not
cleaning up on application close.
Solved by moving the dbinit() call into the QTDSDriver constructor.
Change-Id: I59018d83238672c903b96a4d7f3f21b664c3ff4c
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
as a "side effect", this fixes the build of bootstrapped tools when
doing a debug build under msvc: qt.prf would add CONFIG+=release after
default_post.prf already loaded debug.prf.
Change-Id: Idd17cf28d358950fd90bb18ca7a8d67e06953bc1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Change-Id: Ibce64ed1ec2809551b0cd334b53b33ed445f90f7
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The values of the extraimages variable in the qdocconf file
must now be paths that are relative to the location of
the qdocconf file, just like for styles. They can be
absolute paths, of course, but if they are relative,
they must be relative to the qdocconf file containing
the extraimages variable.
The extraimages variable is for including images used
in the HTML heard and footer that are not referred to
in the documentation.
Task-number: QTBUG-27878
Change-Id: If5e0d1dee7ba231a9c1a73f02a1bbaeb7bfe52c8
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The values of the scripts variable in the qdocconf file
must now be paths that are relative to the location of
the qdocconf file, just like for styles. They can be
absolute paths, of course, but if they are relative,
they must be relative to the qdocconf file containing
the scripts variable.
Task-number: QTBUG-27878
Change-Id: Iec12d1937ca9db540a2aa5e378fadc60de0a2d8c
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Add handling similar to QGuiApplicationPrivate::processDrag.
Task-number: QTBUG-28008
Change-Id: I516531da242471cdfbb59418d0052b25f799f373
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This change ignores templatedir for css files.
It assumes that the paths in the stylesheets
variable are relative to the qdocconf file that
contains the stylesheets variable.
Task-number: QTBUG-27878
Change-Id: I2155e58f352e17d710c93ad4e92679beb169d823
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The timeout is in millisecond. So we just need to divide by 1000 to get
the number of seconds
Regression introduced in f587e8f4fd
Reported in the comments of QTBUG-24795
Change-Id: Id16e05e7d04d33605860926f7516d14cdefd6a36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This size hint was based on strange logic from an alternate
universe. The size hint should only contain the text size
and let the style add what is neccessary for the frame rect etc.
Most styles have worked around this by simply ignoring it,
however some styles could still break a bit.
Note that we add 4 since that is the constant that the old
code 'usually' ended up at and should be compatible with
our existing styles.
Change-Id: Iebdbcb8949dd8b7daa7d8cb96ae5ab7351e4f79d
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
The missing break causes state change event handling to fall through
to tablet event handling, which is clearly wrong.
Change-Id: If19d7b3f794b3614961b9e79952331b0ede1fba1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Since none of the platform backingstore implementations currently
implement this, skip trying to use the optimization for now to avoid
graphical glitches.
Task-number: QTBUG-27971
Change-Id: Ic6d263bb552ef0b4786910d71f965d26d810b7eb
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This will not currently be exposed in the widget API but we
can make use of it for qt quick components.
Change-Id: I08300a3bcd58e68df633fe9b36a988eb6176ef9c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This mimics the platform behavior of using blue color when
the system palette is in use.
Change-Id: I9ad6a552614a3466a930ad5b28fc70d9343d2022
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This keeps the docs as internal, but add
information about the events.
Change-Id: I9b961a946a6d799232a756a9ac874c0caf91ecbc
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
QPlatformInterface::screenAdded() documentation specifies that first
added screen will be the primary screen, so we need to ensure that
the screen Windows reports as the main display gets added first.
Task-number: QTBUG-27988
Change-Id: Ibc17b05a6c37007ff749fb54ab62d47ffa40f8ac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
as their meaning, in fact, is unknown (or default) country/script.
Change-Id: Id75a70d4b33c2092de414f3ac357f6bcb627ba47
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When the sections has been resized we need to calculate new values
for the section start-positions. Otherwise we break visualIndexAt
and sectionPosition.
This fixes a regression introduced in
b800d8b94a
Change-Id: I148dbf44f742208787ed59b70d82b8048d721e90
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The code which was adapted from Qt4 seems not to work as expected on
current Windows versions. There are no additional mouse move events
after releasing the mouse button from the size grip.
One special behaviour in regards to SizeGrips here seems to be that
there is no WM_LBUTTONUP message but a WM_MOUSEMOVE received when
the mouse button is released from the size grip. Due to mouse event
handling in the Windows plugin that event triggers the desired mouse
release event so everything should be fine.
With the previous implementation the behaviour from the bug report
can be explained by the fact, that the mouseMove event is eaten in
qwindowsmousehandler and so the second mouse click isn't even
delivered. Basically the first click triggers the press event without
a release and the second click does not trigger a press but a release
event.
Task-number: QTBUG-27864
Change-Id: I987c6e01dec4a6b6189ed30959daf7a2fcc17df6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
They're read-only member variables (key, hash value of the key)
set only in the ctors, or a "comparison" member function.
All of them can be constified.
Change-Id: Ifd9242577213f38439a4f998b678f5b05413ad21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao@abecasis.name>
Sending enter and leave events to other windows than the grabbing
window is not logical. The policy should be that only the grabbing
window receives enter and leave events.
Changed the documentation accordingly and provided the necessary
changes to Windows implementation.
Also removed explicit leave event generation for widgets when
popup is opened as that is now redundant.
tst_QWidget::underMouse() test was changed to behave according to
new logic.
Task-number: QTBUG-27871
Change-Id: I127fb8685b4a4206d1a319f42cba491ec02bc8ca
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Apparently it was used by QtQuick1
Change-Id: Ia0cf8535cbfed9b09e151b887c243fb173ca300a
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The cursor handling has changed in Qt5 somewhat, which made old cursor
logic for splitters invalid, causing the splitter resize cursor to
persist after hovering over splitter, as well as cursor flicker
during splitter drag.
Since the cursor is changed always in dispatchEnterLeave, CursorChange
event can now come for QMainWindow when cursor hasn't actually changed,
so we now check if the cursor is still our adjusted cursor before
updating the old stored cursor. We also ensure that our adjusted cursor
stays visible if cursor is in fact changed - the changed cursor will
be shown when we no longer need adjusted cursor.
Additionally, we skip cursor adjustments while we are dragging the
splitter to avoid cursor flicker, which is caused by splitter actually
moving asynchronously after the mouse event is handled.
Task-number: QTBUG-27970
Change-Id: Id9f6a0e9653563e09b883f21396de056a88f78a7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Resizing a window larger results in the newly exposed region being
invalidated but the old region is treated as valid. This can result in
the old region no longer updating. This has been observed on Windows 7
64-bit with Aero theme using NVIDIA GeForce GTS 250 and driver version
301.42. Invalidate the entire client window area when resetting the
swap chain so that it updates properly.
Upstream patch: https://codereview.appspot.com/6812076/
Task-number: QTBUG-27822
Change-Id: I0f5d2004576019458baee74c35e52f69b893a219
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Automatic capture of mouse events on button press was released when
the first button was released, even if multiple buttons were pressed.
Changed it so that the capture is released when the last button is
released.
Task-number: QTBUG-28007
Change-Id: Icee59aacaf0ba947820c40cb7ede00193ff46a14
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When both freedesktop.org.xml and kde.xml define text/x-qml (*.qml),
the XML provider would look up *.qml, see two mimetypes, and treat that
as a glob conflict, and proceed with contents-based-determination,
which for this sample file, would find "C source" due to the C comment.
Fixed by ignoring duplicate pattern-mimetype associations.
The binary-cache provider doesn't have this problem, update-mime-database
already filters out duplicates when generating the on-disk extension tree.
Change-Id: Ie335b0b419e7413fa0550779709513f68c2bfc68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This prevents unnecessary updates, since the cursor is not visible.
Change-Id: Iec54ed338a0cb526a03cd611de4d823e26f3d804
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This fix searches for the css files specified in the
stylesheets variable. It searches for them in the
directory specified as the templatedir. It copies
them into the style subdirectory of the outputdir.
It also tests QT_INSTALL_DOCS before setting it to
the library info. If it was set on the command line,
it is not set from the library info.
This change also includes some debug code, which
will be removed after testing.
Task-number: QTBUG-27878
Change-Id: I7a9469b840e13b966aca44b99aebba102e5d4f0c
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Under some circumstances, the same menu item appears several times
in the application menu in the menu bar. This can be seen in Qt creator,
where "About Qt Creator" appears twize.
The reason is that QCocoaMenu::syncMenuItem does not take into account
that merged items cannot be found in the QCocoaMenu that owns the
menuItem, but rather inside the application menu. And because of this,
it fails cleaning up the old item when it changes from e.g
TextHeuristicRole to ApplicationRole.
This patch will fix this.
Change-Id: Ia84f552d1788d80d778c7dded3393412b9d2d8cb
Reviewed-by: Chris Meyer <cmeyer1969@gmail.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
This was apparently done so in each of the widget_<platform>.cpp
in Qt 4.8. This then causes the cursor to be updated in
dispatchEnterLeave() on Windows and Linux.
Task-number: QTBUG-27871
Task-number: QTBUG-27585
Task-number: QTBUG-26424
Change-Id: Idf14cd96ccb36f7c2607853ed8b0024c36a5413c
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
We had this in 4.x to prevend swamping the event queue and causing a lot
of needless processing of stale events.
Task-number: QTBUG-27734
Change-Id: I020fe44885569f5a68c07220fcb44bea3e138089
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QKeyEvent::key() returned the wrong value if the ctrl modifier was used
in that key event. That was due to the fact that ToUnicode might not
return the correct code for these events/keyboard states. While it works
for alt+shift+= (us layout) and gives '+' as unicode value it just
claims that it cannot translate the given state for ctrl+shift+=. So if
the control modifier is used and ToUnicode return 0 toKeyOrUnicode
should try again without the control modifier.
Task-number: QTBUG-10781
Change-Id: I5eb9c200701b4c98a8089fc0ab1ebaa385dbeea8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This happends if an event loop recursion ends before
the native print dialog gets executed (in the same scope).
The reason is that the event dispatcher gets interrupted as the
first recursion ends. And (because of the big difference between
how AppKit implements modal windows compared to Qt) this sets a flag
in the dispatcher that gets handled on the next callback to
QCocoaEventDispatcher::processPostedEvents. This will tell
the dispatcher to break out of the current modal session.
But since it cannot detect that an alien (native) session is now
running, it closes down that session by accident instead.
While code can be written in the event dispatcher to detect this
problem, it ends up more clean to just work around the problem
from the native dialogs instead. This to avoid making the
dispatcher more complex than it already is. Native dialogs is
a bit messy already, and the work-arounds needed should be
isolated inside those components, and not inside the dispatcher.
Change-Id: Ibfde9db4c98401562e7628da1db18d6bed619245
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
If you set the duration of any variant or property animation to 0,
its progress will be stuck at 1 (0..1), and its "end" value set on
the target object, after start() has been called. If you change the
direction of the animation to QAbstractAnimation::Backward, you
would expect the progress to be 0 after start. Instead it's still
1; the code seems to assume that if the duration is 0, the
progress must be 1 always.
The fix is that if the duration is 0, the direction is checked to
determine whether progress should be 0 (Backward) or 1 (Forward).
Task-number: QTBUG-27969
Change-Id: Ibeca084bbbce41df1dca7b7d96c15b6b54394996
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Thierry Bastian <thierryb@filewave.com>
Reviewed-by: Magne Zachrisen <mazachri@cisco.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
In cocoa, saying that a panel accepts key events, will make it receive
key events, but also show it as the active window on screen. The former
we dont really have to care about, since Qt will take care of forwarding
events to the popup for us anyway, even when they target another window.
So the only reason to actually let a panel become key window, is when
we want it to become active. And for popups, we only want this to happend
for Tool windows.
Change-Id: Ic4e5058307c514cbe30174d2a2d4ca0f41c8f71f
QTBUG: 26598
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
An InputMethodQuery event should NOT be transformed into a PolishRequest
if the receiving widget has no WA_InputMethodEnabled attribute set.
Change-Id: I0727c600f1eb68087cb9fbc25f6458aca5417693
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The current code seems to rely on an event, ABS_MT_TOUCH_MAJOR with a
value of 0 to detect a touch release. Not all devices[0] emit this, and
the spec[1] does not specify this behavior.
So, add a check for a BTN_TOUCH with a value of 0 to also indicate
Qt::TouchPointReleased.
[0]
http://www.chalk-elec.com/?page_id=1280#!/~/product/category=3094861&id=14647624
using hid_ntrig kernel module.
[1] https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.txt
Change-Id: I4fc8ff404cad2083a57ff18737c5ea2b06d8ceac
Reviewed-by: Robert Daniels <robert.daniels@vantagecontrols.com>
Reviewed-by: Laszlo Agocs <lagocs83@gmail.com>
Architecture-depedent Qt data defaults now to something under
-archdatadir. Architecture-dependent data is everything that contains
machine code (e.g., plugins) as well as anything that hardcodes
build-specific data, like qconfig.pri and qmodule.pri. That is:
QML imports: $archdatadir/imports (includes plugins)
Qt plugins: $archdatadir/plugins (machine code)
Mkspecs: $archdatadir/mkspecs (build-specific)
Architecture-independent Qt data defaults now to something under
-datadir. This option existed in Qt 4, but did not differentiate between
arch-dependent and independent. Following Autoconf's lead, --datadir is
the *independent* data root.
translations: $datadir/translations (.qm files are arch-independent)
docs: $datadir/doc
By default, both new options are equal to the Qt install prefix.
(Strictly speaking, for complete Autoconf compatibility, we'd need a
--datarootdir=$prefix/share, --datadir=$datarootdir/qt5 and
--docdir=$datarootdir/doc/qt5, but that's just nitpicking and
unnecessary)
Change-Id: I39c886a6a2d2d2c0b11923c50974179e21f2af76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Enter handling requires knowledge of the mouse
position. Extend the enter handling of
QWindowSystemInterface to receive the position
(implemented for Windows, XCB and Mac), passing it
on to QEnterEvent. Dispatch QEnterEvent from
widgets code.
Change-Id: I49c07d2b1f46310c877017dd55d4cd7d636bdbce
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The macros are only for tests in Qt itself, and will be changed without
restriction.
Change-Id: I4cf5b8559be510f01d0122c59492c5ea3e71c8d3
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Move all the GTK2 specific function resolving and painting routines
to QGtk2Painter. A GTK3 specific and Cairo based QGtk3Painter will
be introduced later, and it will be QGtkStyle's job to choose
between the two.
Change-Id: I2c8a85de0cf8187468798cf5faff0006da4b9623
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
This list is current at the time of writing. Since GCC 4.8 hasn't
finished development, it may still change before the final 4.8.0
release.
Change-Id: Ie4a6809bc6680cafcdd0c7a6a2fd6f8be790c8d2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Since the behavior of boundaryReasons() method has been changed a lot,
remove the StartWord/EndWord enum values to force the affected code be revised;
StartOfItem/EndOfItem must be used instead.
Change-Id: I3d1d97d2dbe9680d290646d8c3adb5558ca26bd7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We did this in 4.8 too, to avoid swamping the event queue with stale
motion events. If you're interested in fine grained motion events you
just need to have a responsive main loop. Most applications are only
interested in the latest mouse position in any case.
Fixes performance issues in QML where an onMouseXChanged or
onMouseYChanged in a mouse area does directly or indirectly runs some
heavy computations, slowing rendering to a halt since the main loop is
constantly busy.
Change-Id: I169c96458db4d57b689d6c2c915765b11c35e123
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Small artifacts were visible when tabing in and out QLineEdits several times.
Change-Id: I56334e0534c67c94d357e3517d2470adcc1d8a1c
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
For the special transparent color index, the decoder would skip
writing anything out (thus leaving the pixels at 0 rgba value).
Although correct for later frames, for the initial frame this would
loose the color information for such pixels (which one otherwise
could have made visible e.g. by converting then image to an
alpha-less image format).
Change-Id: I316cefce8f21797feedebfbf98296ad84eaa4b99
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
(cherry picked from qt/c309d424f45dc0e7b62fbbbabf20dbfe355f48a7)
Reviewed-by: aavit <eirik.aavitsland@digia.com>
Variable should be initialized in ctor so it doesn't crash
when deleting it.
Crashes with QNX SDP 6.5
Change-Id: I462f1e374f0588f29fe6fc14a957672467c9b2f7
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Ported from Qt 4 implementation, updated with
QAbstractEventDispatcher::filterNativeEvent() call.
Tested with an example.
Change-Id: I3271f8a565d06d80b7b48ba81728bcdb7b1c32e3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
MYSQL_TYPE_TINY should be used for binding bool input value.
MYSQL_TYPE_LONG might be too big for bool, resulting in bools being
saved in the database as int 127. The problem was not specific to
the vendor's BOOL column type.
http://dev.mysql.com/doc/refman/5.0/en/numeric-type-overview.htmlhttp://dev.mysql.com/doc/refman/5.0/en/c-api-prepared-statement-type-codes.html
Added generic autotest to make sure that binding bool works. All
drivers should pass this test.
Task-number: QTBUG-27763
Change-Id: I4e69f8e3b32fffb702ec9fa8a80ff5c50dea954b
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
While Qt does not support grayscale images explicitly it makes sense to
save palleted images to grayscale png when possible for better
compression and compatibility as opening and saving grayscale images now
converts them to palleted
Change-Id: Iab7c5a5a9d24b9352f5a7bafe04824a97d2463d9
Reviewed-by: aavit <eirik.aavitsland@digia.com>
If possible, let glReadPixels() itself provide the pixel format
that QImage requires, so we can drop the pixel manipulation afterwards.
Change-Id: I6c9226003c15d49548fa00696f31d0b2e26c0783
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
In GTK3, gtk_adjustment_new() returns GtkAdjustment* and there's no
such thing as GtkObject anymore. Just typedef the function pointer
appropriately and as a bonus we'll save ourselves from the casts. ;)
Change-Id: I2f17ab10b835dd0bffabb86345488e84aea51f3c
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Threaded rendering had issues due to bugs in xcb before
xcb_poll_for_queued_event() was added. Now xcb_poll_for_queued_event()
is resolved at runtime and if present xcb events are received on a
separate thread.
Change-Id: I05420c8c9f9a20f41ce0f86ed255bc8b295e7fe5
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This way the platform plugin can use convenience classes such as
QOpenGLFramebufferObject in the makeCurrent() implementation.
Change-Id: I1fb5f6b8ec094ff39454adbeca9eb0d1a8f43ee6
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Following 731ba8ed08 this function is
not used anymore
Change-Id: Id908931b4b21c825bd80a4f03790630818c73c07
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Remove watchUnixSignal(), unixSignal() and associated code. These are relics
which were being used by QWS to detect virtual console switching. Currently
they are not being used at all. The recommended way to watch for Unix signals
in Qt is http://doc-snapshot.qt-project.org/5.0/unix-signals.html.
Change-Id: Id34207cb8853442302a45b2816356da0f973ebb1
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The previously missing mapFromSource() sets the proxy model in the
returned index. Otherwise, the returned index refers incorrectly to
the source model.
Follow-up to 9dfba89c28 and
e5ac4fb9b2
Change-Id: I25cd7baa4a93284ab14ede988ac524971870794e
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
we bootstrap it anyway (as qdoc already needed it). now lrelease will
also need it.
Change-Id: I5117634448368e18d6cf5540d678e039a66c7260
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Making a properly installed libQtBootstrap simplifies
our tools build process a little and in addition allows
other comand line tools to use the bootstrap lib and
link against it.
Initial-version-by: Lars Knoll
Change-Id: Iddf4568a5505bc24898ec1abf7e7022e19f0a454
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
unlike for the paths which fall back to defaults based on the Prefix,
the specs must fall back to the values from qconfig.cpp.
Change-Id: I5f110621921cf278f2c3938a4ec5eb30a78c8502
Reviewed-by: Tim Jenssen <tim.jenssen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This has (and still does) caused lots of grief since
it means accessibility was often unintendedly not built.
Instead copy the lib-at-spi-2 header file needed for the
type enum and build it by default again.
Change-Id: I1ba26f20edff1aeb444c96a37928f36230ac7576
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
There's no need to force the context to be current and the correct FBO
to be bound when swapBuffers() is called, as this can easily be handled
on a per-platform basis.
Change-Id: I7af5a082d6a2b03dfa2cdc874c27617139a781a9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This function can then be used by webkit in a different way.
Change-Id: I2e4c0570b5fc446114f63b3dc43e3c4505bcad79
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This fix searches for the css files specified in the
stylesheets variable. It searches for them in the
directory specified as the templatedir. It copies
them into the style subdirectory of the outputdir.
Task-number: QTBUG-27878
Change-Id: Ic9ff43ab6f939cb50f1b41a9cc58f3f8686ebaf5
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
After the migration to QPA, touch events usually have a QWindow as a receiver,
unlike Qt4 where receivers were QWidgets. This broke QGestureManager and
gestures such as the TapAndHoldGesture, because
QGestureManager::filterEvent(QWidget *, QEvent *) was never called. Since the
receivers are now of QWindow type, QGestureManager::filterEvent(QObject *,
QEvent *) gets called instead, always returning false. This has several side
effects, one of them was causing the TapAndHold gesture to time out, because
it never got a TouchEnd event (and thus it thought that the touch was still
going on, even though it was not). This patch ensures that if a gesture event is
meant to be delivered to a QWidget, the right event filter method is called.
Change-Id: I1df5f763fe6c4d8db0058adbd17d23d70b4988fe
Reviewed-by: Zeno Albisser <zeno.albisser@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
While handling events for Widgets and Windows in QWidgetWindow::event
makes sense for other events, it causes QWidget::show/hideEvent to be
called twice when handled like "the rest". Having that as one case here
seems to be the cleanest solution. Removing the call to showEvent from
QWidgetPrivate::show_helper (as proposed in the bug report) causes
autotests to fail and thus is not a viable option.
Additionally the expected result for the task221221 test for
QDoubleSpinBox was reverted to the Qt4 value as Qt4 behaviour was
restored.
Task-number: QTBUG-27199
Task-number: QTBUG-26424
Task-number: QTBUG-22565
Change-Id: I0ac42b09b1a7618de042d27aa5dd1b3d9f30f552
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
To be reverted after I19c00b54b1d2712f9418e8bcf56e35a8008b89ef and
and Ibd5cd10814c8cbd2b1f6e49b70782c7768d2366d are both integrated
Change-Id: I2e14d732cc7fc4168e8b4507a050f43f1e4c9e49
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Abbreviated properties are to be avoided. But all 3 of these
properties are redundant from the QML perspective; and because QRect,
QPoint and QSize are (wisely) not QObjects, it's not possible to bind
to _their_ properties, which make these QWindow properties less useful
than users might assume that they are.
Change-Id: I19c00b54b1d2712f9418e8bcf56e35a8008b89ef
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
When the content view is set it will trigger a frame notification which
we do not want to see because it would put our internal data on the
geometry out of sync. So ignore the notification until after it is set.
Change-Id: I704c2f186c8b0c6508a90d5dab51b7f6f02162fc
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
These are intended to exist only during the integration of patch
Ie4424ec15fbdef6b29b137f90a2ae33f173edd21, so that it will be possible
to build the other modules. Then it will be reverted after the
property renaming is propagated to all the other modules.
Change-Id: I8d0c0774e685a728a98e8c866d95c606c927ff46
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
windowTitle, windowModality, windowIcon and so on are named that way
to be similar to the ones in QWidget. However QQuickWindow inherits
all of the declared properties, and we would like to have shorter
property names in QML. If you are working with a Window then it's
obvious the title property is the window title. Unfortunately,
there must be patches in many other modules which depend on this one.
In order to avoid the need to merge them all at the same time,
there is also patch https://codereview.qt-project.org/#change,39001
which temporarily adds backwards-compatible accessors, which can be
removed after the other modules are able to build without them.
We should not rename windowState to state, because in QML, state
usually drives the state machine for animation transitions etc.
(although QWindow is not an Item, a user might get confused about it).
Related patches are
https://codereview.qt-project.org/#change,39001https://codereview.qt-project.org/#change,37764https://codereview.qt-project.org/#change,37765https://codereview.qt-project.org/#change,37766https://codereview.qt-project.org/#change,37762
Change-Id: Ie4424ec15fbdef6b29b137f90a2ae33f173edd21
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Some of the xcb- libraries we depend upon are not (yet) common across
distributions. This is problematic for binaries that should be working
on different distributions. The patch mitigates this by:
Adding the files from
libxcb-proto (version 0.1.6), compiled with libxcb-1.5
xcb-util (version 0.3.9)
xcb-util-image (version 0.3.9)
xcb-util-keysyms (version 0.3.9)
xcb-util-renderutil (version 0.3.8)
xcb-util-wm (version 0.3.9)
from xcb.freedesktop.org/dist to src/3rdparty/xcb.
Adding a configure option '-qt-xcb' to use the sources instead of
linking to the respective runtime libraries.
Task-number: QTBUG-27803
Change-Id: I6ea87daa382871b2b9072a601511523fa0b9f44b
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
as it happens, this matches our coding style ...
Change-Id: I88d0916499a05a48d12691f5df5999c5ffd7a91c
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
enums are signed, while sizeof is unsigned.
as a side effect, we can optimize away one comparison by taking
advantage of the two's complement representation.
Change-Id: Ic0871306d30ad7217f2909e51e96a876a3f393dc
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Holding down the second click of a doubleclick should also autocapture
the mouse like it does in Qt4.
Task-number: QTBUG-27863
Change-Id: I38c0567eca9fd7dcd3ef3d17921db5ebd3fe18b1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
A 180° rotation results in a TxScale QTransform with negative scaling
factors (x=-1.0 y=-1.0). This is not properly handled by blitter paint
engine yet, so use software rendering fallback in this case.
This rendering issue can be seen when using "-webkit-transform" CSS
property in WebKit with DirectFB QPA platform.
Change-Id: Iee496b6bf0c90ffe36c4235ceaa2c80f296b2ca4
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
All the qdocconf files in use for Qt 5.0 set the
codeindent variable to 1, which prefixes each line
of a snippet with one ' '. But this messes up the
cutting and pasting of snippets into editors for
actual use. qdoc now lets the codeindent variable
be initialized to 0, and then it never changes it.
This looks ok in the default formatted html output.
If the html output formatted with the template CSS
files also looks ok, then the codeindent variable
can be removed from all the qdocconf files, since
it will no longer be used by qdoc.
Task number: QTBUG-27798
Change-Id: I398c57bdfc99e747ec086fbd8ddf5994cf3ee6d5
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Remove compile time version check to make flushing work correctly
when building with other sdks than 10.8.
Task-number: QTBUG-27862
Change-Id: I915ae80017be1c03d5217aa9bdb60991603f8d01
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
gtk_progress_configure() is deprecated and no longer exists in GTK3.
Change-Id: I02d58456285326b8aee6050da1a155cacbb86eee
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
This triggers a bug in clang (before version 3.2). See also the bug
report: http://llvm.org/bugs/show_bug.cgi?id=12670 .
Change-Id: I9e0bc1cc39059ffa5e062652b932bc01e453ef98
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There is a common standard among all Qt modules. These changes affect
the final .qch file for each module.
Changes:
1)URL in qt-project.org is confirmed by DevNet maintainer
url = http://qt-project.org/doc/<module>
2)Landing page title mapping
indexTitle = landing page
3)"C++ Classes" as a child node.
The list of C++ classes and the titles are specified in the wiki.
4)Removed extra subprojects.
They are not needed for now. Each module may need additional nodes.
Change-Id: I1825476c21fe9aaddc9d6b512ff74229f17271a0
Reviewed-by: Martin Smith <martin.smith@digia.com>
There should be a way to include files across projects regardless of
their project configuration.
Change-Id: I61797fad594c425a30a54b73539ae670e9545cb9
Reviewed-by: Martin Smith <martin.smith@digia.com>
QApplicationPrivate::leaveAfterRelease was not properly cleared when
mouse event handling was interrupted by a modal dialog, which caused
every mouse move over the modal dialog to trigger enter event to the
widget under cursor.
Fixed by clearing QApplicationPrivate::leaveAfterRelease if mouse event
without any buttons pressed is handled.
Task-number: QTBUG-27643
Change-Id: I4f31daa656bc643c88e5338282a671ae2077e255
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
In Windows, if the window is maximized with a doubleclick on the title
bar or resized with a doubleclick on the bottom or top frame border,
there comes no WM_LBUTTONDOWN or WM_LBUTTONDBLCLK event for the second
click, but there comes at least one WM_MOUSEMOVE with left button down
and eventual WM_LBUTTONUP.
Since QWindowSystemInterface::handleMouseEvent() can't differentiate
between actual button down event and a move event with button held
down, the move resulted in a button down event being sent to the widget
that was under cursor after resize.
Fixed by ignoring any events with left button down for which we didn't
get the initial native button down event. Since entering an application
with mouse button already held down is not generating mouse events
anyway until the button is released, this should be safe.
Task-number: QTBUG-27845
Change-Id: Ibc7abf8a127c401801e1b654a2829582f43a1ae8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
By not making this a compile time decision we ensure forward
compatibility for older xcb versions if the xcb plugin is built against
a newer xcb.
Change-Id: I744777d53bf7b8deb6eff372494f4403d19d364c
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Changed the platform leave event handling logic in QWidgetWindow to
match platform leave event handling logic in Qt4, where last mouse
receiver is used as leave target only if last mouse receiver wasn't
a native window itself. In that case it is assumed to get leave event
of its own when relevant.
Task-number: QTBUG-27639
Change-Id: Id6edcd29754a15c959f18ab38b20d66e5d446510
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Those code was warpped by Q_WS_MAC and should be part of QPA already.
Change-Id: I48b751aad0509b50ccf9e82778c962ed80a2a9f9
Reviewed-by: Jiang Jiang <gzjjgod@gmail.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Before, the functor slot (or lambda expression) had to have the same amount
of arguments as the signal.
This shown to be a big problem to be able to connect to signals that had
a QPrivateSlot.
This implementation use the type of the operator() of the functor to
know how many arguments we have.
As a bonus, we also can check the arguments in a static assert.
The test comes from https://codereview.qt-project.org/#change,38703
But this patch also works without variadic template
If the compiler does not support decltype, we workaround the lack of it
by using another level of indirection.
Change-Id: I9850b43e8caf77356a2ec3f4c0b0ed532d96029e
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Bring back code from keymapper_x11.cpp.
Task-number: QTBUG-27648
Change-Id: I2a189a0537bcd2ae0eb093576c84814b2f09933b
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Check presence of Direct X SDK depending on
compiler version.
Check for presence of the headers d3dcompile.h and
intrin.h (SSE2) as well as d3d9.lib and the shader
compiler since the header d3dcompile.h is
also present in MinGW.
Change-Id: I7ee9701f4f9dc175ed2d733db79dda46de4d69f1
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The library is not present on Windows XP, for which /DELAYLOAD
is used in ANGLE. However, as this causes problems with MinGW,
use dynamic resolution.
Task-number: QTBUG-27741
Change-Id: Ie4a2706d57b751fbb6fc6f3e76ef2e8ddac3b892
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Use gtk_combo_box_new_with_entry when gtk_combo_box_entry_new is not
available. The latter was deprecated since 2.24 and is no longer
available in GTK3.
Notice that gtk_combo_box_new_with_entry returns a GtkComboBox, whereas
the old gtk_combo_box_entry_new returned a GtkComboBoxEntry.
Change-Id: I4aa3c528c6e04967ed783fce72036acb6063445b
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
- GtkType -> GType
- GTK_CHECK_TYPE -> G_TYPE_CHECK_INSTANCE_TYPE
Both are deprecated aliases in GTK2 and do not exist in GTK3.
Change-Id: If2dc4ba09451cabb6730f8b23e15db7554a9f829
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
The index file generated by qdoc when it is run in
-prepare mode has been modified so that most elements
have a module attribute. The value of the module
attribute either came from an \inmodule command, or
it is the value of the project variable specified in
the qdocconf file that was read by qdoc.
Task number: QTBUG-27626
Change-Id: I44198bbbc1738fafc110c6b905eb1d67bc745323
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Destructors should be out-of-line so that the compiler doesn't generate
one per translation unit.
Apart from creating more work for the compiler, it can also lead to
duplicated vtables if the dtor is the first virtual function
(reimplementation), and all other virtuals are inline, too.
Duplicate vtables then break RTTI.
In addition, having virtual dtors de-inlined allows us to add code
to them in a BC way.
As a final argument, this change may lead to less code app-side, since
a sequence of cross-DLL calls (to member variable dtors) is replaced
by a single cross-DLL call to the new out-of-line dtor.
Change-Id: Ifb8c4aa992c75d61ba9ac8de5ab41d1e96b0a0b1
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Angle, for instance, which is now the default on Windows,
does not support the GL_BGRA_EXT format as input for
glTexSubImage2D(). In the case where it's not detected, we
therefore need to flip the bytes in the input.
Change-Id: Ibe78d0223e3c2c39cb1943cdcf67103044d00aa7
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Pointer to const member function have a different signature, and hence
need their own traits code.
Change-Id: Ie4b2434a412f412444fb07ef1388a37cab105ecd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Do not access GtkWidget::style directly, it doesn't exist in GTK3.
Change-Id: I1ee4ad5ca0894c9277219fc2a70f5f1c69ec632f
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
GDI objects that are created need to be deleted once no longer needed,
instead of just released.
Task-number: QTBUG-27812
Task-number: QTBUG-27825
Change-Id: I53b04b54cea9e2aaa8fc72365c215f516c5682e6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The line to restore it was missing, and the leftover variable
caused a warning, which was removed in
abe5a0a432 .
Task-number: QTBUG-27828
Change-Id: I00b8b89b07bec38a1660c3a9c61220b6d0d7eb48
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
This was uncovered by the linux accessibility test which
tried to call non-existing functions.
Change-Id: Iaa9640c23ee77d7c5b2321d7f8cfa6d12d61c0e9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This fixes the build when QT_NO_BIG_CODECS is defined.
Change-Id: I832fb8ba5df6c4a6c1db9bdaecc498690357a56a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Valgrind warns about the jump in qfontconfigdatabase.cpp:522 based on
uint QFondDef::hintingPreference:2 property. Surprising thing is that
the property is initialized in the default constructor, so there should
not be an issue.
The warning disappear if the property is _not_ placed on a boundary of a
two words, or if bit field is fully initialized. So I suspect that only
one bit of the two was initialized properly.
I decide to implement both solutions because of a potential minor
performance improvement, during reading the property.
I still fail to say why the value was uninitialized, I believe that this
patch simply workarounds gcc bug or valgrind bug.
Change-Id: I2e87738f66a435ef6e30b3d2db6baa73da025426
Reviewed-by: Jiang Jiang <gzjjgod@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Add a read position variable to eliminate excessive memcpy'ing when
reading a partial buffer.
Specifically, fix performance issue of reading large files from
QNetworkDiskCache in QtWebKit2.
Task-number: QTBUG-27522
Change-Id: I21edc909bf9223971b2c3db5f1fa6b89c5b61c5f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Antti Harju <antti.harju@ixonos.com>
Creating and displaying a plain QGLWidget on Mac would
display "garbage" or previous frame buffer content
on screen. This looks broken and raises interesting
privacy concerns.
Fix by adding a call to glClear().
Change-Id: I507c24275e41fac0be5f518c5a70d151099ae6b8
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The previously missing mapFromSource() sets the proxy model in the
returned index. Otherwise, the returned index refers incorrectly to
the source model.
Follow-up to 9dfba89c28.
Change-Id: I78ab9183820909b646a7333f28aa5ec7266fa675
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
1. Remove the code for activate application, due to Qt 5 already
has this feature
2. Update the code for power setting
Task-number: QTBUG-23267
Change-Id: Id257c2e10e8e750a4b68cd2995c2ac4b70f8910c
Reviewed-by: Jiang Jiang <gzjjgod@gmail.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
This prevents the user of moving the leftmost column.
There will be no API to allow move of the tree-structure.
It is very weird to do that, so it shouldn't be a problem.
In case it is a big problem somewhere it can be hacked with:
QTableView unused;
unused.setVerticalHeader(tree->header());
tree->header()->setParent(tree);
unused.setVerticalHeader(new QHeaderView(Qt::Horizontal));
Task-number: QTBUG-332
Change-Id: I3a251c8d0fd472ec0ad7edb20a7f3e00af7e0da8
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Get rid of QWidget-centric QMacStyle::eventFilter() and implement the
fade out animations for scrollbars using QNumberStyleAnimation-based
QFadeOutAnimation.
Change-Id: I2000fa50d46b153e981ceafc12a53932a196382e
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
We need to add the styleoption when evaluating the small and
mini size hints.
Change-Id: I00f8709912aa2202caef4dbdeaebb5d67cc9a9b4
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Documentation has been updated, changes apply to Qt5 as well as Qt4.
Change-Id: I13241a3b4c16d2cb1b24f80fe26832467621923a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It does not make sense to add a QLayout to a QSplitter, since the
splitter manages its child widgets in the same manner as a QLayout.
The result of doing so is that the child widgets inside that layout
will lead to the splitter and the layout fighting to position the child
widgets.
QSplitter::addWidget should be used to add widgets directly to the
splitter instead.
Change-Id: I640b463cae8673f87354d28636bff4dd3cfb9679
Reviewed-by: Samu Voutilainen <samu.voutilainen@gmail.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The function createDummyWindow() allocated a colormap, but never freed
it. Freeing it is safe after the window is created.
Change-Id: I4c876568572c9e1e9dde7047850a51917ef3702f
Signed-off-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
When the XCB connection breaks, all following XCB function calls will fail and
function calls that are currently in progress will return. This means that
xcb_wait_for_event() will return NULL and thus the QXcbEventReader thread will
exit.
This patch uses the above behavior to make sure that processXcbEvents() will be
called. The error handling should always be done before normal event processing,
because all XCB calls will fail once the connection is in an error state. This
is especially unexpected for xcb_get_setup() which suddenly returns a NULL
pointer.
Task-number: QTBUG-27686
Change-Id: Ie3e4058f9d92bcbfc45934a8b36d9a7254e2b4bb
Signed-off-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Previously, translations in resource files were loaded through
QFile and the data was copied. Now, simply use the resource memory
in-place.
Change-Id: I55a06c1e7bb15c169cc69b908b3021136beac9d2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The animation is not just supposed to run when indeterminate, but
also while it is progressing.
Change-Id: If176bd230c2f6f83781e01ea77526c24d54c8477
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
the condition is supposed to suppress the event emission, not to trash
the return value.
Change-Id: I3e327ceedb909ac29ba975c49b0f039b50eb4ee1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When no widget is provided we hardcode the height and the value
was off by 2. There is no change when a widget is provided.
Change-Id: I555b5206b8750db06595a1e2572a3f8212635a9d
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
The QWinIoCompletionPort thread was never properly cleaned up.
Maintain a reference count for QWinIoCompletionPort and create/destroy
it on demand.
Change-Id: I607b574484554dd3ad107dfb43b0a248bcf8b7a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's basically an attribute of qtcore (and everything that depends on it).
Change-Id: I6eeefeb5df70764399d9f22dca9dbec1843b8d68
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is correct dependency-wise (anything which links to this needs to
link qtcore), and just cleaner.
Change-Id: I2c49d16fc8a0ee8bc55a3c165993fd1c4e313dab
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the function is automatically performed by debug_and_release.prf,
regardless what we do with this flag.
Change-Id: Iddec69b35e0e905fdf4133ee240af37d3a8ada0b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
__EXT_LF64SRC isn't defined in this case.
This also makes it consistent with mkspecs/common/posix/qplatformdefs.h
which uses QT_USE_XOPEN_LFS_EXTENSIONS and QT_LARGEFILE_SUPPORT
to decide which type of stat struct to declare.
Change-Id: Iaa155acc270783901376b543fdeffb5263294754
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Listing all files with QDir is slow.
Instead, use argv[0] for zygotized apps and _cmdname() for
non-zygotized.
Apps run through the terminal will fall in the zygotized case,
which is ok.
Note about zygotized apps:
Zygotized apps don't have an executable, they live in a shared
object file.
These apps are run through a deamon that forks and dlopens()
the shared object ( for performance reasons ).
For this reason we can't use _cmdname(), since it just contains
the the file path of the daemon.
On the other hand, non-zygotized apps have a bogus argv[0]
when run through the navigator ( command line is fine ).
Change-Id: I9953e8fa05c9fb11c33b3a38ebab00fe33ba4c44
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
This fixes an error in the calculation of the exact drop position
when an user is moving a section in QHeaderView.
Before we compared a mouse-position local to the widget
(pos) with a summed length of sections (posThreshold).
However we need to consider/substract the headers offset to make
the posThreshold comparable to the local mouse position.
This solves e.g.
Task-number: QTBUG-14814
Change-Id: If0281cf0c7b98316474f18e8eaa32c6d062dda56
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This calls invalidateCachedSizeHint on clear, which is a logical
thing to do.
Task-number: QTBUG-22528
Change-Id: I0befb2d492599fa8a05b1c2162bbca586e1b019d
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Hardcode logical dpi to 72 again. NSDeviceResolution
gives us the physical dpi (144) and results in double-
sized fonts in Qt. QPlatformScreen does not currently
have a physicalDpi virtual, perhaps this can be added
later on.
Unfortunately the usefulness of a per-screen correct
DPI metric seems questionable to me:
1) The value returned by the system is not correct,
pixels per inch on the rMBP is around 220.
2) Qt always uses the dpi for the main screen, via
qt_defaltDpiX/Y.
Change-Id: Ia35804be62ee7f1c623bad854f65d744dc9075d4
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The current updateScreens() implementations deletes
QScreens and creates new ones. Deleting a QScreen hides
all its windows. The result is that Qt windows disappears
when applicationDidChangeScreenParameters is called.
Change-Id: I5870d025d2bbf36621817cb220a835d1a6b367dc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Since 733ac1f6e6 the default MODULE
is the base of the .pro file for the plugin (i.e., "windows"). Since
MODULE becomes the base of the module .pri, the names of the module
.pri files can clash. Now we explicitly specify MODULE for
printersupport plugins to avoid overwriting the module .pri files of
the platform plugins whose .pro files have the same names.
Follow-up to 81f8f0db5c which renamed the
TARGET.
Change-Id: Ie83892dc419257e1df3b81bcf6ecec751ae345b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The old code rendered text too large. On desktop components,
the widget workaround ensured that text was clipped.
This should address both problems. Since we anyway do not
adapt the height to font size, I dont se a point in
supporting custom fonts here.
Change-Id: If3c0509cdff4dbadfd98bd4b1934eaa665148cbf
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Bring back code that was removed
in Qt 4: 60324267fbb8a8554e62aaf9ef01360709292320 for QTBUG-7411 .
This code reselects the submenu action of a currently opened
popup when the mouse is moved to the submenu crossing other
actions. In addition, make sure it only triggers when
the reason is not keyboard selection.
Task-number: QTBUG-20094
Change-Id: Ibb73f83e86635083aad8b1e79fc0fdd512c65754
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This allows using QStandardPaths in one of the bootstrapped tools, if
required for a future need.
The Blackberry version appears to be usable in bootstrapped mode
already.
Change-Id: Ia4e9b9564395d2e151f8ac229ac2a2aa2982e92f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This required adding a "since" attribute to the index file.
Task number: QTBUG-27695
Change-Id: I97ca96b837ce404ea85ca8086718be4e7a9e21a8
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Several platform plugins, like eglfs, kms, etc don't support multiple
windows as there's no system compositor, they're rendering directly to
a single back buffer. By adding a platform capability we'll be able to
provide better error reporting when an application tries to create
multiple QWindows on a single-window platform. Also, QML apps can use
this capability to figure out whether they should create a QWindow for
dialogs / popups / menus, or whether to just create items in the same
scene, that are shown on top of the rest of the content.
Change-Id: I15b8d21ee2bc4568e9d705dbf32f872c2c25742b
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
QFileDialog::selectedFiles() defaults to file model root
for 'AnyFile', which confuses native dialogs since
selectedFiles == directory in that case. Split up
QFileDialog::selectedFiles() and skip the default when
initializing QFileDialogOptions for native dialogs.
Change-Id: I65cda182df8b1748159058fc361c10d97f5650ce
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If ReadFile returns with an error then we must set our internal state
accordingly. QWindowsPipeReader::readSequenceStarted must be set to
false. If ReadFile fails, we're not within a read sequence.
Also, we must handle the ERROR_BROKEN_PIPE error.
Task-number: QTBUG-25342
Change-Id: Ic9247f170fa9cc47fa7e45d0f47ccfedac06a593
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The old code is just plain wrong for negative julian days. Replaced
with plain math from The Calendar FAQ [1], which is correct for all
julian days, provided you use mathematical integer division (round to
negative infinity) rather than c++11 integer division (round to zero).
[1] http://www.tondering.dk/claus/cal/julperiod.php
While the conversion code works for up to around JD +/- (2^63/4), we
only use an int for the year in the API, so this patch limits minJd()
and maxJd() to 1 Jan (2^31) BC and 31 Dec (2^31-1) AD, respectively.
Note that while the new conversion code looks like it would be more
expensive than the old, gcc will in fact be able to optimize it to be
slightly faster (probably because x86 hardware implements round to
negative infinity, and so GCC manages to optimize floordiv to a single
instruction, compared to the three instuctions needed for operator/).
In the following test application, run with a release mode Qt and
redirecting stderr to /dev/null, I measured an improvement from
6.81s +/- 0.08s to 6.26s +/- 0.16s user time over five runs on an
otherwise idle x86_64 system.
int main(int, char *[])
{
int year, month, day;
qint64 jd;
for (qint64 i = Q_INT64_C(-1048576) ; i < Q_INT64_C(1048576); ++i) {
QDate::fromJulianDay(i).getDate(&year, &month, &day);
jd = QDate(year, month, day).toJulianDay();
qDebug() << jd << year << month << day;
}
}
Change-Id: Ifd0dd01f0027f260401f7f9b4f1201d2b7a3b087
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
These are useful when QWindow is exposed to QML.
Change-Id: I7ec49ef365183e2c784605889e8ea22c2ef34781
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Refer to Qt::TimeSpec instead of listing potential values (which are
incomplete).
Also, the current QDataStream version number is now 13.
Change-Id: I9a68385977dc2fe4dacee75330cb539850478480
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Replace "QTestLib" with "Qt Test". Some style and language edits.
Remove some empty headings.
Change-Id: I568b4bbde981c3ef1899c830931892c16b66b4e2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
This seems to be the established practice.
Change-Id: I75a65d722a026ab0eb1805688743f46aba406e6c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Modal dialogs that do not have a QWidget parent may be hidden
by their parent unless they actually have a transient parent.
Task-number: QTBUG-27786
Change-Id: I7847df3517e5ba6e8d77a2a18c905e908a3cd2f4
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Also brings back a working QWidgetPrivate::setMask_sys().
Change-Id: Idde9eea15d28bb0299258df81322a5a3ff0b9493
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Fixed a couple of typos; also, wrapped the snippets in a main() function,
so that now the snippet file can be compiled
(and therefore the compiler can help us at detecting those typos).
Change-Id: Ie182a9c4cb451db13a6f4bfa5eaed66bc6966c8f
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Casper van Donderen <casper.vandonderen@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
instead of symlinking (on unix) or creating a forwarding spec (on
windows), just put the default specs into (the bootstrapped)
QLibraryInfo.
Change-Id: I595500ef7399f77cb8ec117c4303bc0a2ffe505f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it now defines the DESTDIR and creates an INSTALLS rule.
Change-Id: I15a462ccad9acbe3521c352fa98327825dc27c05
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Creates a function for cloning the style options
used by Vista style.
Change-Id: I4d83661acd6bdfff5c633447046a206018b537af
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
We needed a new helper function for this. The widget cast was
breaking desktop components. By using accessible role, we can make
it work for both use cases without depending on the widget.
Change-Id: Ic854dc45a4e5b7a50c5be701e903d58a4a914ee5
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
The logic was a bit odd as it would check if the groupbox had a
font set and then override it anyway. Since we anyway want the
fallback to be used for components we just make sure that the fallback
is to use the same code path.
Change-Id: Ic5071b43cda76e2bb7356a6f71cc8458c4e8bf27
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Using
git ls-files -z | xargs -0 sed -i 's/ \+$//'
in the relevant directories.
Change-Id: I861ef9952fb32ed2db9ec8b67864ec7d0d61f0f2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
To avoid leaking when converting a QFuture<T> to a QFuture<void> we need
to have a separate ref. counter for QFuture<T>. When the last QFuture<T>
goes out of scope, we need to clean out the result data.
Task-number: QTBUG-27224
Change-Id: I965a64a11fffbb191ab979cdd030a9aafd4436c2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Jens has an use-case for using accessibility from styles.
By making the enums always available regardless of QT_NO_ACCESSIBILITY,
it makes the style code less littered with ifndefs.
It should (ahem) also solve the problem where Qt Desktop components
does not compile if QT_NO_ACCESSIBILITY is not defined.
This happens on some linux distros, since atspi-2-dev is not installed
by default, which again causes grief for those affected.
Change-Id: I15d65df8c752a0c4af37cc7b4d908a757cb6a9c4
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
The 'Non-GUI Classes' page is not relevant.
Also removed landing page from the 'modules' group.
Change-Id: Ie2d34d36f98a4697becfebd5fbc215913bbb41ce
Reviewed-by: Martin Smith <martin.smith@digia.com>
The previous size was incorrect and added far too much height
when the widget was undefined. When it was defined it would get
its size corrected so the patch should have very little effect on existing
widget code.
Change-Id: I7c22f4226eda270f0d71050bc4248686b035cb39
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
The additional proxy functionality is only available starting BPS API version 3.1.1.
Change-Id: Iadd2950119fa1dca706e8cd34804b038e3f704bc
Reviewed-by: Peter Hartmann <phartmann@rim.com>
In Qt5, each namespace has a URL, so the test for an
empty URL fails in findAllNamespaces(). The test is
now wrong and is therefore removed.
Task number: QTBUG-27695
Change-Id: I888f70aff6e6e6c696e173caa91b5dcfabdab0ec
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
All modules currently have a test_modules CMake test. The
new module_includes test has very similar requirements, and can
obsolete the hand-maintained test_modules tests in all modules.
After all test_modules have been removed in other repos, the
module_includes test can be renamed to that name.
The types chosen need to have a constructor which can be invoked
with no arguments. QtConcurrent has no public classes which fit
that description so it is still tested separately
Change-Id: Id7929cd32b3112c293cbf5e6964cc894a697f9b1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Make sure that QCommonStylePrivate::animation() does
not return an animation that was already stopped.
Change-Id: I35b7f8e0fabff9908f247b3632e35388e2c95a6d
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
To avoid regressing due to de58eb64bc,
we need to return a pixel aligned height in QTextLine::height() and
also use pixel aligned heights when calculating the position of
lines as well as the bounding rect of the layout.
Later, we can add a QTextLine::naturalHeight()
or something like that which gives the fractional value, but until then,
we need to access private API in QPainter to get the correct
alignment, since we still don't want to align the height of the
last line in the layout, we only want to align the origin of each
line.
Task-number: QTBUG-27740
Change-Id: I12325f07d33aaf1a1b967e0a11492759d0f565d9
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
In Qt5, each class has a URL, so the test for an
empty URL fails in findAllFunctions(). The test is
now wrong and is therefore removed.
Task number: QTBUG-27695
Change-Id: If1aa823d4c59b91c67113f77a1a57c04ff7d1a02
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Change-Id: Ia9bf8d3c202b17746036e203268ef6229aaa900d
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This file needs to be compiled with SSE2 intrinsic support.
It happens to compile on x64 system because SSE2 is implied
here, but on 32-bit compilers (in this case MinGW 32-bit) it
needs to be explicit.
Change-Id: I92dd5bc9257b6dd344ab02341475c023327b756a
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
If a modal dialog was shown as a response to button click, the button
retained its hover highlight, because it didn't get leave event.
Fixed by tracking the most recently entered window and sending a leave
to it when modal dialog is shown that blocks it.
Also modified tst_QGuiApplication::modalWindow() autotest to check
for enters and leaves.
Task-number: QTBUG-27644
Change-Id: I387647e18a762a39d523e3df31221b9583a39f9d
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
When the QPrinter is initalized then it will set up page margins based
on the default paper size. If the paper size is changed to be a custom
one then it should disregard the margins for the default paper size.
If the page margins are set explicitly beforehand then it will use these
page margins.
Change-Id: Ic535c3a80b8b217dbd5eb5f4fb2cbc0ab1354563
Reviewed-by: Titta Heikkala <titta.heikkala@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This avoids an additional call to lstat() When using QDir::entryList()
with the QDir::NoSymLinks flag.
Change-Id: I3b602546c6a4502ae25a5748a12c60e69325bb5d
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: João Abecasis <joao@abecasis.name>
The CLSID_FileOpenDialog, CLSID_FileSaveDialog-based dialogs
are available from Windows Vista on only, the old Shell-function
based ones are required for Windows XP.
Add a command line argument to switch dialog types.
Extract some common functionality for both dialog types.
Task-number: QTBUG-27621
Change-Id: I224c5c4574c2ff54daf354f00d3d1f82abc6f459
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
For simplified and traditional Chinese.
Based on the Apple doc: Internationalization Programming Topics -
Language and Locale Designations.
Task-number: QTBUG-27130
Change-Id: I677563525edd607583561be20f4dbed24b2443a5
Reviewed-by: Jiang Jiang <gzjjgod@gmail.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Enabling touch events has a negative impact on overall
performance. In particular, enabling touch events seems
to disable scroll event compression, resulting scroll
processing lag.
Until we find a solution where we can have both proper
scrolling and touch events we choose scrolling over
touch events. Applications that disagree can enable
touch events manually:
NSView *qtView = (NSView *)QGuiApplication::platformNativeInterface()->
nativeResourceForWindow("nsview", qtWindow);
[qtView setAcceptsTouchEvents:YES];
Change-Id: I85cdd6e8c8ed8685c6cd5418c89fed6af02887cd
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
So that the linker discards unused functions too. Some of our .cpp are
way too big
Change-Id: I1a2685be6a5e7fd3cf34f18d545483c63c2343dd
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
hasUnquotedAP currently only checks for an a or A, which is wrong
according to both the toString documentation and the comments for
hasUnquotedAP.
Change-Id: I03015734b846fe761085cf8f8fca2b29210cff97
Reviewed-by: Jon Severinsson <jon@severinsson.net>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The M_E, M_PI_2, etc. math.h constants are not defined with MinGW-w64
GCC when compiling with -std=c++11.
Task-number: QTBUG-27561
Change-Id: I2267c170dd3788abc9c37425a9be514bbae51f5a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Alexey Pavlov <alexpux@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This option is opt-in (default: no). When configured with
"-proxies-system-default", Qt automatically picks up the system
proxies.
Change-Id: I8cc002f29587854f448d97117b08c43d8eedec76
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This implementation is unused. It was part of a platform that will
unfortunately not see the light of day. Remove it since no one is
maintaining it.
Change-Id: I9e675225a32f227739c688608f937df66a14e9a4
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We can insert directly on the most left-most Node.
We always enforce an insert here (unlike the insert call),
but that is not a problem since the keys in a std::map are unique.
Change-Id: Ib409b90ffc57a5a43dab4a4b08d34f6fdabd057f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The (r.start != -1) case is equal to (i == formatChanges.count()) case
in the loop; no need to exit the loop just to do exactly what it did.
Change-Id: I4129d8012399895c2fce70b26716ca5aeadee79c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
in case when the layout is partially initialized.
We shouldn't access any data except of indices
if GlyphIndicesOnly flag has been passed in.
Change-Id: I264689b498e0f9de8b5c040d47dbae4f6ef391c4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This code became dead when the Symbian code was removed, and should
ideally have been removed at that point.
You can find the old code in 4.8 repo:
bool showSystemDialogFullScreen = false;
if (qobject_cast<QFileDialog *>(this) || qobject_cast<QFontDialog *>(this) ||
qobject_cast<QWizard *>(this)) {
showSystemDialogFullScreen = true;
}
if (showSystemDialogFullScreen) {
setWindowFlags(windowFlags() | Qt::WindowSoftkeysVisibleHint);
setWindowState(Qt::WindowFullScreen);
}
So, obviously, stuff inside the #ifdef Q_OS_SYMBIAN was removed, but
the side-effect of that was not realized.....
Change-Id: I6b5d1066c97367c354af4da1ce6b9c60c8dc2120
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
In addition to the actual removal of the softkeys API in QAction,
this commit removes some enums related to the softkeys feature:
Qt::WA_MergeSoftkeys
Qt::WA_MergeSoftkeysRecursively
It also removes some "zombie" enums:
Qt::WindowSoftkeysVisibleHint = 0x40000000,
Qt::WindowSoftkeysRespondHint = 0x80000000,
(The only implementation that used these were removed when
qapplication_s60.cpp and qwidget_s60.cpp were removed.)
Change-Id: Ib6fc6d543def4757383d5f19256199d9d190c614
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Also generalize set _WIN32_WINNT to 0x0501 and _WIN32_IE to 0x0501 globally,
as it is out minimal requirement these days.
Change-Id: I8ca9102d49c37f908fd8ac032f707f8fe4fdcb22
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
List functions matching the command line parameter instead
of dumping all functions.
Change-Id: Ic504587b1036f09702f47579f90406333c4efbeb
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
-included the snippets
-editing for technical accuracy still to be done.
-ported missing files from Qt 4
Change-Id: I0b2d27630b762c6518c08973a40b476d7852001d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
It was probably not implemented because it needed to access
private APIs.
However, accessing those from this a11y plugin is unproblematic.
Forward-ported from Qt 4.8 with change
d2fb64d52fc6ec229d775f829a9a0cb3d251aad3 (and then slightly improved)
Change-Id: Ifa2d48c152fd75fc1fff49a05369787a7db3b902
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The sync.profile Perl script will now generate the "QSql" header file
during compilation. By removing the \inheaderfile command, the
documentation will now display the namespace's own name as the header
(i.e. "QSql" in this case).
Previously, the only documented way to include the namespace was to
include the whole module, which is expensive. This change also makes
QSql consistent with other namespaces, such as QSsl and QAudio, which
have their own dedicated camel-case headers.
Part of the Header Consistency Project
(http://lists.qt-project.org/pipermail/development/2012-October/007421.html)
Change-Id: Ibb82d442956e767c13b82f1e552aabdf2e8ff110
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The role is already set through the ctor,
no need to explicitly do it again.
Change-Id: I0027068c66b5771b628a9fe10fbfe929e7bf1554
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This patch goes together with 730a5a994f
and is the second code path that deals with the hash of valid objects.
Change-Id: Ia7b0995cb667cfce5f7697aa61856e44f745a932
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
It is possible to call the accessibility update for any widget,
even if it doesn't implement the right interfaces.
While that is bad, warning about it is better than asserting.
Change-Id: I23c0c783083f73fb816d75b2c9b78efd603edcb6
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This fixes the build if QT_NO_CAST_FROM_ASCII is defined.
Change-Id: I0273794a83b0adaa0c15a9910cbcc9ea5d48ef7a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This suggestion keeps track of the most left node.
The point is that constBegin() becomes a lot faster.
That speeds up iteration a bit, and makes it O(1) to get the
first element. The penalty in insert and remove is very small.
On large trees it seems to be less than 1%.
It should be noticed that constBegin() is a very common hint
on my planned change to 5.1, and this opperation will without
this patch cost 2 x log N. One when the user calls the hint
with begin - and one where it is compared with begin.
Other std::maps has a very fast begin(). E.g
http://www.cplusplus.com/reference/stl/map/begin/
(begin with constant time)
Change-Id: I221f6755aa8bd16a5189771c5bc8ae56c8ee0fb4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Giving the std-map a hint (normally) improves insert performance.
There seems to be no reason not to provide this hint.
Change-Id: I4344607ebf54574a3ae9666d87a41a3c14762361
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Otherwise we always get EGL_SUCCESS, which is not very informative.
Change-Id: I25311c14108ae385913aa9dc159a1f5fad142342
Reviewed-by: Rainer Keller <rainer.keller@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
Using a pipe for thread wake-ups is inefficient and can introduce significant
latency. Replaced the pipe by directly sending a BPS event.
Refactored the wake-up code in the private class of the UNIX event dispatcher.
Change-Id: Ic073b0b56c3cbf8327fc6bc3c37132cc3583ef86
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
This one was missed when the QDate range was extended.
Change-Id: I0dbcc9fdebca88f7397203d8e539429dcff9ac30
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since commit 84787d82ee
QItemDelegate::setEditorData() works out of the box
on QComboBox.
Change-Id: Ic9839f7eccccbdb787ce204fe98311335ee16b92
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
-Added \annotatedlist for the groups
-Sorted and placed the pages on the index page.
Change-Id: Id1a4344c0b39f00036f5ac29b1fcb869d5602d2b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Additional checks to figure out if new Drag&Drop cursors where set. This means it is possible now to keep QDrag object in your program and call setDragCursor() method every time we need to change cursor depending on context.
Change-Id: I4be69e44b2863371a7ffbb29efc17c18210d6cde
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Check GL_VENDOR to test whether using NVIDIA graphics. On Linux,
GL_VERSION and GL_VENDOR contains "NVIDIA". On Windows, only
GL_VENDOR contains "NVIDIA".
Task-number: QTBUG-27658
Change-Id: I5e74d07ecb9522d1a86ac2953415a51bbdbe8c49
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Adds NOTIFY to currentText property.
Test included.
Change-Id: I3e92b585ad6697891d61537c82f6ab9e8beb1a00
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QItemDelegate and QDataWidgetMapper use the WRITE method on the USER
property to set a value in a widget. This did not work for QComboBox
whose USER property currentText lacked a WRITE method.
This change adds the missing setter and flags it as the WRITE method.
The setter setCurrentText() simply calls setEditText() if the combo
box is editable. Otherwise, if there is a matching text in the list,
currentIndex is set to the corresponding index.
Test included.
Follow-up to 816c554017 which restored
currentText as the USER property.
Task-number: QTBUG-26501
Change-Id: I5f2f999e60b09728ca03ead4e28fe36d1f3ee189
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There is no reason to emit this when there is no change.
Change-Id: I34f0ceec7c4b0959b77bc5be3ce2c2ad55864598
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The variations of includes which should work are tested. For example,
in the case of testing the QtCore module and QObject include, the
following includes are generated and compiled:
#include <QObject>
#include <QtCore/QObject>
#include <QtCore>
#include <QtCore/QtCore>
As the private include directories are not available to the compiler,
this also tests that private headers are not included from public ones.
Change-Id: Id03d0fe290c9691e0f7515015892991d1701ab72
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
-qt-module-defaults.qdocconf already contains the HTML template.
Change-Id: I5757741166f0f688ce0e8a4e77ed45fd4d72f1c7
Reviewed-by: Martin Smith <martin.smith@digia.com>
Fixed menu handling on Cocoa so if a menu is enabled/disabled or made
visible or not then it will keep this in sync with the appropriate
native menu entry.
Change-Id: If269185fcf065fb1b2f60d6ef8c27c107eb4509f
Reviewed-by: Pasi Matilainen <pasi.matilainen@digia.com>
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
In Qt5, each class has a URL, so the test for an
empty URL fails in findAllClasses(). The test is
no longer necessary and is removed.
Task number: QTBUG-27695
Change-Id: Id3e7b17c9d68fc59340f88d1300f2a422ad2a18c
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
According to libpng documentation - PNG files reduce possible bit depths
to 1, 2, 4, 8, and 16. If data is of another bit depth, it's possible to
write an sBIT chunk into the file so that decoders can recover the
original data if desired. Since we hardcode depth to 8 there is no need
to call png_set_sBit
Change-Id: I8e3941675019b920051775128ff4cf2bf1ca7c4a
Reviewed-by: aavit <eirik.aavitsland@digia.com>
Some interfaces might be connected but not working (e.g. no IP address,
no gateway etc.)
In practice, this prevents the USB interface (among others) from
being reported as active and thus the QNetworkConfigurationManager
as being reported as online.
We only want Wifi and 3G etc. connections to be reported as online
when they are up.
Change-Id: I59fbe53bed8392d363a0191d589737f2304c853f
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Andrey Leonov <aleonov@rim.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
While unlikely, there are cases in which QQnxWindow::renderBuffer() is
called before the window buffers have been created. Without this check, the
program will abort on QQnxBuffer constructor, since the value that will be
passed to it will be of an invalid buffer.
Change-Id: I9ad5926dca856570032dcf10b6975e8f3364c284
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This change enables receiving the native GLXContext object that is used
by a QOpenGLContext in case of GLX.
This clearly is non-public api that is only meant to be used as a
last resort for cases where it is really necessary to get hold of
a native context object.
Change-Id: I7f1f974f18063ed334b8034a0c0192c875c10cec
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
When nameDetailsVisible is set to false and an invalid/empty
string is passed to selectNameFilter(), the regexp used to
strip the filter off the suffixes returns empty and a crash
occurs.
Change-Id: I926ea49514ff25a103977d8121fca1cf83d647f5
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Removed enter/leave event generation when moving between between
related windows in QWidgetWindow (i.e. native widgets) while some
widget was explicitly grabbing the mouse input. This makes enter/leave
event generation identical to non-native widgets.
Task-number: QTBUG-27551
Change-Id: I4996007bd7922e073a2957ad267a6373e8f3fecc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
New-style drag&drop cursors are used now on Windows when user drags
object to application from outside (e.g. image from Explorer). This is
achieved by using IDropTargetHelper.
Change-Id: I67e1db73cf433e235fce891eef0093cd4e605904
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
There is not need to have this dependency any more
since mac is overriding anything we depend on in Windows
style anyway.
Change-Id: I8fe0e0cc949265170947b492e04e08fdd4cf5027
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
_q_connected checks if pendingEncrypt is false before committing the
address type. This could be used to delay the commit but nothing is done
later in _q_encrypted, so the commit is avoided completely.
This causes SSL connections on a network without IPV6 support to hang
if the domain name record contains both IPV4 and IPV6 addresses.
As SSL is handled a few layers above IP, there should be no reason to
avoid/delay committing the address type if the TCP connection was
established surccessfully. Thus this patch is removing the check completely.
Change-Id: If56a3365f9f51712b4aae3f7902711711ace86fd
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This patch will make it possible to get animations on
desktop components without using the widget pointer.
Change-Id: I2d2eca111dab0d96f276ff3627505c0652c4b4e5
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
As of Qt5, this macro is defined to be empty; simply get rid of these leftovers.
Change-Id: I167ccb4c9e92ec9b5e4faeb02bf9c5ef5d982b50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are more opportunities in QtCore and the rest of Qt to make signals
private instead of public. This is a test-dart to see if there is any
reason not to do this.
It would be nice to make QObject::destroyed private, but as it has a
default argument it would be source incompatible to anyone connecting
to the SIGNAL(destroyed()) instead of SIGNAL(destroyed(QObject*)).
Currently the function-pointer-based connect syntax does not accept
a functor (or lambda) with a different number of arguments than the
signal. Olivier says a fix for that might come in 5.1, but for now
the qfiledialog2 test is changed to not use that anymore.
Also, the function pointer for a private signal can not be assigned to
a local variable, so the qmetamethod test is changed to not do so
anymore.
Change-Id: Iaf776b822f9ba364f2c184df0c6b23811da56e44
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
qdoc now sends progress log messages to stderr
only if -log-progress appears on the command line.
The progress messages are not printed to stderr
if -log-progress is not used. i.e., -log-progress
is off by default.
Task number: QTBUG-27707
Change-Id: Id605d943506ab38639730bf16473b156d061dc53
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
On Mac, only line edits and list views always get tab focus. It's only
when we enable full keyboard access that other controls can get tab
focus. When it's not editable, a combobox looks like a button, and it
behaves as such in this respect.
Change-Id: Ia31b0ad01b48a47c1b81180364681d8614863106
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
These will be needed by upcoming QFadeStyleAnimation and QBlendStyleAnimation.
Change-Id: Ibc5092d5dbd834cb9b16353d3e83b95b04d9484b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This is similar to the patch 05aa8c6c12
which was applied to QListView.
Task-number: QTBUG-26548
Change-Id: I38ff07230673a93a32b01a7f1951d0378d94185b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Synchronous expose corrupts painter state if it is done during existing
paint operation, which can happen e.g. when requesting some value from
dumpcpp generated wrapper inside a slot.
Fixed by implementing support for setting asynchronous expose and
doing expose according to the setting in handleWmPaint().
Task-number: QTBUG-27209
Change-Id: I89b5aa823fda947d26b1a4757f129e7c31ea408b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
As QWidget initializes any painter created in paintevent handler to
have the pen color of the palette's foreground, setting it to 0 width,
i.e. cosmetic, it negated the effect of the recent change to default
1-width non-cosmetic, ref. I04d910e9700baf7f13a8aac07a3633014bb9283e
This caused scaled painting with default pen on QImage and QWidget
to yield different results.
Change-Id: I930b64bf7c0a8c84b9ea3edb49adc813370fed0e
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
There are a lot of hacks here and there in Qt trying to align the
text in a correct way which caused regressions to appear once
the default coordinate system changed. We need to remove these
hacks to get a more consistent and maintainable base. This also
fixes the regression introduced by changing the aliased coordinate
system.
Task-number: QTBUG-27667
Change-Id: I620db2ca23b7ff6c912f3a51e86e7e36bbef81f0
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
When doing happy eyeballs style network state lookup, we might have to
close an SSL socket from its connected signal. This can cause the warning:
QSslSocket::startClientEncryption: cannot start handshake when not connected
The signal should be emitted after we called startClientEncryption to
avoid this warning. In that case it will initialize the encryption
and ramp it down right after.
Change-Id: I0c8c79cad7f91f0088b87c5e4ee8aafbc688411c
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
qdoc was loading index files during the -prepare
phase, which it shouldn't do. The index files it
was loading were from modules other than the one
qdoc was running on. They had not been deleted
because qdoc only clears the output directory of
the module it is running on.
Also added a static function to the Location class
to print information messages on standard error.
This is useful to see what qdoc is doing and when
it is doing it because these log messages are
interleaved in the qdoc error messages. More of
these log messages will be added as needed.
Also removed some unneeded qDebug() stuff in
the code that processes the dependencies from
the qdocconf file.
Task number: QTBUG-27707
Change-Id: I1eec8d6ec89ff040969c2a1f62f21f551f347e05
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Should not use the QT_INSTALL* variables here since it won't
work if we configure with a prefix.
Change-Id: I03ac170cb11262c38928f2a0d95e6f243d6d665b
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The new 'prepare_docs' CONFIG option triggers the documentation rules in
default_post to generate two extra targets: prepare_docs and generate_docs.
The prepare_docs stage runs qdoc with the -prepare option, which means qdoc
will only generate index files, and the generate_docs stage will call
qdoc with -generate, which reads the index files and generates the final
output. The regular docs target will then run the prepare_docs target
for all submodules before running the generate_docs target.
This ensures that when generating the final output, qdoc has all the
index files for all the other modules available, to be able to resolve
cross-references between the various Qt modules.
This patch needs a follow-up in qt5.git to add CONFIG+=prepare_docs, so
that the root Qt5 build will be able to hook into this new behavior.
Change-Id: I654d7f0d4d5a41d9be208e6d3a8923bf0194f9ad
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
It doesn't make sense to hold an unguarded pointer to a
QPropertyAnimation while assigning ownership of that animation to the
animated widget.
Destruction of the widget while the animation is in progress causes
the animation pointer to become dangling; then the widget is removed
from the containing QMainWindowLayout, which attempts to abort the
animation, dereferencing the invalid pointer.
The crash can be reproduced sometimes with
tst_QDockWidget::taskQTBUG_2940_resizeAfterUndocking (which is in
Qt4 only).
Change-Id: I758bf7193b2ea39cd4d8e87197d8ff957d3368eb
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Recent fixes to stylesheetstyle caused not calling fixupBorder()
when globalStyleSheetStyle is used.
Task-number: QTBUG-27651
Change-Id: I73263c951e2db7d574e81da3f60a1b79f3852716
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
We only need DnD within the same application for now, so returning
a QSimpleDrag is enough.
Change-Id: I842d48f0252f8103fa8632dd3d149ae431658adb
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
Context menu key wasn't working, as QPA had no handling for it.
Added ContextMenu event to QWindowSystemInterface and proper handling
to QGuiApplication and QWidgetWindow.
Also provide Windows implementation.
Task-number: QTBUG-27648
Change-Id: I7ce71ec4b5cdcc7be758e67f9faf6d863f7b19be
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
ANGLE is a component that implements the OpenGL ES 2.0 API on
top of DirectX 9. See the following for more info:
http://code.google.com/p/angleproject/
ANGLE is now the default configuration on Windows. If you
want to use desktop OpenGL, you should build Qt with the
following configure options:
-opengl desktop
To configure Qt to use another OpenGL ES 2 implementation,
you should use:
-opengl es2 -no-angle
Task-number: QTBUG-24207
Change-Id: Iefcbeaa37ed920f431729749ab8333b248fe5134
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
We had this issue in Qt 4 before: Clang considers the use of d uninitialized
in the initializer list for d. This might or might not be legal, the clang
devs are divided on that topic. Let's just use a more common form and ignore
the issue language lawyers.
Change-Id: I3324255963a6d0f4a9057fe0d1d9ae868d3efef7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is in line with what QTime::addMSecs and QDate::addDays do, for
example.
Change-Id: I902112486727f74f669a97bde6c42028e0838f8d
Reviewed-by: Jon Severinsson <jon@severinsson.net>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Some statements could not be tested, such as default cases of switches
where all possible cases are already handled and some statements where
the system locale is used.
I also removed some statements that would never be reached and hence
will never be able to be covered by tests.
Change-Id: I8ea3071f66d942d986e65708732af6751d36b5e3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Currently all C-style strings used as data types in QTest::addColumn
will assert at runtime with, e.g.: "expected data of type
'const char*', got 'QString' for element 0 of data with tab 'blah'".
This patch makes it clear that C-style strings are disallowed.
Change-Id: Iadbb8f10e16607de95c7adb43d9ff3310aac6738
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Converting the date 1 January 0001 to a string in the format
"dd MMMM yyyy" currently results in the string "01 January 1", but it
should be "01 January 0001".
Task-number: QTBUG-27287
Change-Id: Ia025da7343d1c36aaee34c47c6db551a6e89595f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Initialize all member variables including m_invScale, which
was uninitialized.
Change-Id: Id581b1db9411b2f945281e17b7a0407c746761f8
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
qdoc now clears the outputdir in the -prepare
phase but not in the -generate phase. It also
does not print error and warning messages in
the -prepare phase. It does print fatal errors
in the -prepare phase, of course, and the QML
parser prints syntax errors in the -prepare
phase, but all the qdoc errors and warnings
are only printed in the -generate phase.
Task number: QTBUG-27688
Change-Id: I9973a473260b4f79428f6b8e12a5ac35f3be15b4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
For example a paused "default button" animation might want to update
the target to get "non-default button" looks meanwhile the animation
is paused.
Change-Id: Ibb854a40f38a8971e7233b1f34a83056e6a9d827
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Not all executables originate from a BAR package, for example unit
tests.
Make those use the fallback code for finding the application file path.
Change-Id: I5603f329bbe74e37d319ddd190f72bc6f64e1a5c
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The code sets it to input.length() iff the regexp doesn't
match the string, while the docs say it's *always* set.
Therefore, make the docs match what the code does and
add a simple test to enforce it.
We're not changing the code to match the docs because
1) it's better to stay conservative (we don't want
to break existing behaviour);
2) this behaviour mimics what the int/double validators do
(they don't move pos at all).
Change-Id: I958074558de6b0fc5944101c6535fc7e00442ae9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Because qt5_use_modules is a function that does a find package which
finds imported targets, things like this:
qt5_use_modules(foo Sql)
if (TARGET Qt5::Sql)
message("Qt5Sql_FOUND: ${Qt5Sql_FOUND}")
endif()
will show Qt5Sql as being not found, even though the target is in scope.
Fix that by making it a macro instead.
Change-Id: If314bd5b4d3f769c6c7df5ff2c924eabd16dcc0e
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It is only removed from the documentation for now (I think this should
go in the beta 2).
That should liberate us to be able to change the API if needed for
other platforms that might need a soft keys API.
Once this goes in, the plan is to do the actual cleanup.
Change-Id: I9a7a3eb45597cd013fe3c4bd479ad08a25ef0b9b
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The groupbox did not take custom fonts into account when calculating
the height of its titlebar. This resulted in clipping issues on
Windows.
Task-number: QTBUG-27655
Change-Id: I7252bc94d2bbb0731b9dbc1caa6cdd2074fdd7ab
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Use the Qt4CompatiblePainting render hint when painting with QPainter to
treat default constructed QPens as cosmetic still.
The NonCosmeticDefaultPen render hint gets documented as obsolete, since
it was in any case not respected by the raster nor OpenGL paint engine.
Change-Id: I04d910e9700baf7f13a8aac07a3633014bb9283e
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Fusion style only depends on CommonStyle and it seems the autotest
for tst_QFileSystemModel:iconProvider assumes an icon will be
returned from standardPixmap. Since we dont want the icons
to depend on style in this case we should move all this to commonstyle.
Change-Id: I3a26367e5c0aefe2a39838f0c2cadc4f7afad89d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
These classes are not supposed to be instantiated.
QToolTip() already was declared, but not implemented.
This patch just adds Q_DECL_EQ_DELETE for better
diagnostics on C++11.
QWhatsThis() was implemented, but appears to be unused.
Since it was private to begin with, successfully compiling
QtWidgets is a sufficient test.
Change-Id: I698ece8f0eebbcdac7be98456dd42197b758a825
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reformulate #ifdef'ery involving {}s so as not to throw
off auto-indention of code editors due to unbalanced {}s.
Change-Id: I0f9858c78d0b6d923de75ca45c7d65ce3fa53e50
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The testcase in the bug report takes 370035 ms to sort the rows with
Qt 4, and 5646 ms in Qt 5 (when using the extra hints to layout*Changed).
That's an improvement of more than 98%.
Task-number: QTBUG-17732
Change-Id: If78f972d80c501e0cb39078228086c4f4ac8a65b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We should pass the shareHandle here instead of the handle for the
context since that's what it expects.
Change-Id: If851758817057ecc3c3646cba2354becf5a8a839
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Since the private slot is already there and used, it might as well
emit the signal and save us one connection.
Change-Id: I899df74c20f8c2b7875a0f9d0a04465c5dc48bde
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This ports 282951bc6c7ddb607fb7ebf61eb8de9acf3da77f
aka Change-Id: If0269a49b9fcd1b3e9fcfd32fac912560df28f21
to Qt 5.
Change-Id: I46f1d4947d90688b598993f76330e2e10aeca950
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
The font engine has been re-used without increasing it's reference counter
Task-number: QTBUG-27596
Change-Id: Icd4c3ca131446255ad4a27da8aa9a6c69177212e
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
As opposed to the deprecated methods.
Task-number: QTBUG-25628
Change-Id: Ic1b50b1ac1b974cdd2dd9f0151d567227784e547
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The signal is removed from the API; all references to it are removed
from documentation; the unit test that checks for its emission is
modified to listen for QThread::finished() instead.
The QThreadPrivate::terminated flag is also removed, as it served no
purpose other than to trigger the emission of QThread::terminated()
As discussed at http://lists.qt-project.org/pipermail/development/2012-October/007216.html
the signal is not guaranteed to be emitted after every termination,
rendering it useless.
Change-Id: I7b0c45d7889da0d33875545331606f2208ee56fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These were used to test QtWayland, but there are other options available
for that now. The DRI2 code hasn't been maintained and doesn't even
compile at the moment, so let's just remove it to de-clutter the source.
Change-Id: I7db0f4db82348497b9f4d6c2dcf2e13f3ab14a76
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Prefetch all the extensions, to avoid having to do blocking calls later.
Change-Id: I1527dbf03d76372ec88bc0d5d9f7af18a4cc2a26
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
With minimal effort we can keep the GCC 3.4 build working.
Task-number: QTBUG-19803
Change-Id: I31611a27b97d5ac426ea857d8f1b656dc6f5377a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes QFont do a "light" detach when the font attributes data has been changed.
The new test clearly shows that the engine is now shared between
two font instances after changing the kerning attribute.
Change-Id: I59db822f459f02d111686dba7101b98e361fada9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
remove() can use non-detaching iterators internally before calling
erase(), which hasn't been exploited so far, so that the detach() in
erase() never actually detached. When using erase() from outside,
you can't do it legally without calling begin() or end() that detach()
before erase() is called.
Now remove() doesn't detach anymore, and detaching in erase() works.
With new tests that fail after changing only the erase() callers
and pass again after fixing erase().
Change-Id: I47c0a9e362dce8628ec566f5437d951755de96c8
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
It seems this is the pattern to follow:
landing page: qtwidgets-index.html
examples page: qtwidgets-examples.html
class list page: qtwidgets-module.html
Change-Id: I3e5459fe650178e0398cb43181b594c0f12a170e
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
- Move dnd docs and examples out of QtDoc module to gui library in QtBase
- Remove info related to Motif dnd since Qt5 doesn't implement it
Change-Id: Id7eb4eb422f4294a36dd92709ce3007903371f03
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This improves iterating over /usr/bin with QDirIterator by more
than half, from 36 to 13 milliseconds.
Change-Id: Ib3a9271c3a6f81c1ea3c21d012c875c7e9bad2ad
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
.qmake.conf (and previously .qmake.cache) already does that for us.
Change-Id: I06cc01fa45921d7bd66dda7a0f88729faeff37bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Native widgets have a native window each, so QPA plugin sends enter and
leave events for associated QWindow whenever mouse cursor moves from
one widget to another. QWidgetWindow had no context to interpret these
events as moves from one widget to another, since they were sent
separately. This resulted in leaves and enters for each widget in
parent chain, when only the bottom child should have gotten them.
Fixed by peeking into window system message queue when handling leave
in QWidgetWindow and retrieving the entered window from queued enter
event.
Also provided a convenience function that QPA plugin can use to
ensure both leave and enter events are in the event queue when
moving from one QWindow to another.
Task-number: QTBUG-27550
Change-Id: I74fec0ac90f6848495c2392c5f7e41624ad8aea2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The goal is to cut as many QWidget dependencies as possible and make
stylesheets eventually work for the desktop components.
Change-Id: Ib4aa47af07379fc39fd6df1961e113d03df6df35
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These containers don't make sense and will just result in no action
being taken (all items added will simply be discarded), but it
shouldn't crash due to a division by zero.
Update the documentation to explain the fact.
Task-number: QTBUG-27339
Change-Id: Ib9acf5c0a9a826e6853e7beaf5e56511fde98dc6
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Ian Walters <ian@walters.id.au>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the event dispatcher native events will be processed in a tight loop
to drain the queue. IO events and timers will be postponed.
Change-Id: Ic2c06ed182027289eb5e7042fbae99efbd01ea27
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Documentation has been updated to reflect changes in Qt5.
Change-Id: I378858cf61f4bf62375c30c3903818d754dadcf0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The IA-64 C++ ABI does not encode the return type for non-template
functions (QVector is the template, not the function), which means that
these two functions have the same signature:
Node *QVector<Node>::begin()
typename class QTypedArrayData<Node>::iterator QVector<Node>::begin()
[both are _ZN7QVectorI4NodeE5beginEv]
When linking compilation units compiled with different
QT_STRICT_ITERATORS settings, only one of the two out-of-line copies
will survive. Depending on the ABI, we may have a problem: the ABI can
say that a function returning a structure takes an implicit first
parameter, which a function returning a regular pointer doesn't.
Task-number: QTBUG-27277
Change-Id: I57a59e5a7c46f55faabfe85c073dca89d2a7bbf3
Reviewed-by: Jan Kundrát <jkt@flaska.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The problem is that isValid() should return true as
soon as we have a view widget.
That sadly means we need to verify that the model is still
valid whenever accessing it.
Change-Id: I9237528abf2f5c75a73382525103307e9ca15f05
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This is being changed because:
- The OpenGL paint engine in Qt only supports GL2
- QML2 only supports GL2
- QSurfaceFormat has a default value of 2
Applications that want to use GL1 on a QGLWidget will have to
explicitly request this format using QGLFormat::setVersion.
Task-number: QTBUG-27589
Change-Id: Ieb283ef7d6e15a29ec28ce7e4363dbf477decaa7
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The dbus_get_version function was introduced in 1.2, so we'd need to
detect pre-1.2 by the absence of the function. But if we're going to
detect the presence or absence of any function, we might as well do it
on dbus_connection_can_send_type, which is the function we wanted anyway.
Change-Id: I6e17a3a8f1382c6a489490084f6e3f61aa5a1947
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Qt 5 is the time to get rid of all the old inconsistencies in the raster
paint engine caused by trying to preserve the old X11 based
coordinate system where (0, 0) is in the center of the top-left pixel
instead of the upper left corner of said pixel. However, this was only
adhered for line drawing and path / rect filling, and not for image or
pixmap drawing and not at all when doing antialiased painting. By
defining the antialiased coordinate system as being the right one and
letting the aliased fill rules follow from that we finally end up with
some consistent behavior that doesn't lead to surprises and workarounds
in application code.
It is still possible for applications to get the old behavior by
setting the QPainter::Qt4CompatiblePainting render hint. This should
make porting easier for the few cases where an application relies on the
aliased fill rules we used to have in Qt 4.
Task-number: QTBUG-27500
Change-Id: If86b95e77d838ec83033d64af86632b9a73c74a9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Don't add invalid ranges to the result. They will be removed
whenever d->ranges is processed for public consumption
anyway. For example, QItemSelectionModel::selection() calls
merge() with another selection. The merge() method removes
invalid ranges already. But the invalid ranges don't need
to be there in the first place, so this patch removes them.
A longer-term goal is to maintain d->ranges as an always-sorted list.
This method can be called with a vector containing invalid
QPersistentModelIndexes when those persistent indexes are made invalid
in between layoutAboutToBeChanged and layoutChanged. It's a normal
thing to happen and a case that should be handled deliberately.
Change-Id: I741ed9208d8a75644975c9e8d61f0d6d78e20576
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QListView::currentChanged and QListView::selectionChanged changed to
use 0-based indexes instead of 1-based indexes.
Change-Id: Ie618970c9a37ec76156dbfab2e86685c3c8f374c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The linux test would actually fail because the qobjects created
could end up having the same address (create-delete-create...).
After an object is deleted, it's not instantly removed from the
cache of valid objects.
Instead it would stay in the list with it's smart pointer becoming zero.
This patch adds the missing null pointer check so we are always up to date.
Change-Id: Ia7be14741d4798c2b8e75cb7127298c73cf206ef
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
It's actually looking for the mkspecs (so it can read qconfig.pri to
get the Qt version), so give it exactly what it wants.
Change-Id: I2957b2d93a8837b8492d313209d45ff3ec01704c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Previously recommended fonts sizes in pixels do not work very well
on the new high resolution devices.
Current UX documentation recommends certain point sizes for certain
roles. Those work well on both type of devices.
Change-Id: Ia4faa4cf2d753cab9b10f91d01dfef1450683272
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
It turns out that the calculation of mouse pos over the frame
strut (title bar) was wrong. When outside the content view, the
nsevent coordinates are negative, so to get this correct, we
need to calculate the height of the window above the content view
and use this information to get the mouse pos in positive
coordinates with origin window top left.
This bug was especially apperent with QDockWidget, as it became
almost impossible to dock a window under such circumstances.
Change-Id: I2faf6aab5e2aa0b4e217ea087ceec8c1b1e978bb
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
This is a new non-native style for Qt.
It is intended as a replacement for the now aging
Plastique and Cleanlooks styles.
Change-Id: I30c0518a69e4e3b8b2b05ee7d84c3a5a1f307578
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Adding QCheckBox, QComboBox, QLineEdit etc. into an HBox layout or grid
layout makes the layout look like a snake's trail. Fixed the positioning
of these widgets to make the layouts visually more appealing.
Updated qmacstyle auto-test accordingly.
Task-number: QTBUG-13635
Ammended-by: Gabriel de Dietrich
Change-Id: I89461f9aad68ea8488070ed06257b9b8e7f493c5
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Changed it to check the Frame*Margin property instead of the
Block*Margin property as this was incorrect for a QTextFrameFormat.
Task-number: QTBUG-22173
Change-Id: I2c3066165fb592ed034874b1180593822859f933
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Now that we no longer re-use the animation code in gtk,
it is time to remove this strange dependency.
Change-Id: Ib672a9b110dfba08d79b8654e572994007675957
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
We also made an accessibility auto-test more stable, so that it would
not be influenced by this patch.
Task-number: QTCREATORBUG-7966
Change-Id: I6ce4e2361c8847aee5dd1cf5664c29cd2d83e38d
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Using dynamic properties on the native interface is deprecated.
Change-Id: Ia3411780dad15af61d4805c0d9fabf00dba92301
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
This caused the following assertion in tst_QAccessibility::listTest():
ASSERT: "m_type != QAccessible::TableModelChanged" in file
qaccessible.h, line 455
Change-Id: If1f1e80521f346019bdbd59aac58e30c870d6e4e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Remove more unnecessary references to QtWidgets in accessibility
implementation.
Disable accessibility tests (which rely on QtWidgets) when QtWidgets is
not available.
Change-Id: I57315537779d31af1245d42d1b4c49174016da54
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
In ResultStoreBase::addResults() it possible that the ResultItem we
create is invalid (filter-mode enabled). Since an invalid ResultItem
won't have any result data, we need to make sure that we don't allocate
any data for it.
Task-number: QTBUG-27224
Change-Id: Ic99b191db0e9dd4e29b64911f87d90a8148bb7a5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The cursor is still rendered 1px too low, but probably needs to be
fixed in QTextLayout.
Change-Id: Ie56c7140898b941c8d896f503ce1934d0d681a4d
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
The branch indicators in common style was painted based on motif
style, effectively making it useless.
Since most styles inherit from Windows style, I
moved that into common style. It was already duplicating
most of the code used in commonstyle.
Change-Id: I1a383d90254bb97aebc038fa058ec0f225cf9dab
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The previous code assumed that -1 indicated some sort of "auto",
but this is not the case according to documentation.
Task-number: QTBUG-27600
Change-Id: Id17ce32f94ded61a63a33d0c04ec5312f53c7923
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The file was already present but wasn't mentioned.
Change-Id: Icac4fd5276b071ed2173e72aed51abb4c0b5b50a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A parentless/targetless QStyleAnimation calls updateCurrentTime() from
QAbstractAnimation constructor. Avoid the potential crash even if it's
not a valid use case for QStyleAnimation.
Change-Id: I9cd263d105c8ea4b5cbabac9a7680991745ccd95
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Remove dependencies to QProgressBar where possible. This makes
it possible to animate for example QQuickItem based progress
bars (read: the desktop components).
Change-Id: If208506702365895576238c24191b8d70b90841c
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Otherwise they might be still events sent to view with no
proper QWindow. Also, add dealloc QNSView for clean up.
Task-number: QTBUG-26580
Task-number: QTBUG-27456
Change-Id: Icdbe5c39490b72ec82795c2d71e5671cea81921e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The current implementation requests the platform window to set
the window state if it can, and return the actual window state
back.
The problem with this approach is that the platform window is created
as late as possible, so a call to QWindow::setWindowState would in
many (most?) cases never be forwarded to the platform window (instead,
the platform window is responsible to check the current window state
upon creation). As such, the window state might be left unsynched with
the platform window.
This patch suggests removing the return value from
QPlatformWindow::setWindowState. This will at least be consistent, so
that setting/getting state would produce the same result independent of
delayed window creation. If needed, we can later add new API to
QPlatformIntegration or QPlatformWindow for querying supported/actual
window state.
Change-Id: Ie43f56169656854a765ce88b47a808f8f3d51bb4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Those were using an inconsistent macro compared to the function
declaration in qdbusthreaddebug_p.h.
Change-Id: I3e77ba83ceedc99cb1f957fdfe318e34ab9c9628
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This ensures WA_MacNormalSize & Co. work (almost) properly.
Task-number: QTCREATORBUG-7966
Change-Id: Ib03b5c0f163409e2bc387f6cf9b56c72c43caec7
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
For some reason, m_resolveSymlinks was never set to true for
non-Windows systems. The constructor set it to false and the
setter was only implemented for Windows.
So remove the member and code that is only executed if it
is set to true, except on Windows.
Change-Id: I386e980688a603475a413e2ef3628d0754778c5c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Instead of allocating small chunks (40 bytes) on the heap, use a contiguous
array to hold them. This always occupies 10240 bytes of memory instead of
1024 (32 bits) or 2048 (64 bits) for the pointer array (plus heap memory
which depends on the number of items allocated), but is more cache-friendly
and uses less memory when the array isn't sparse.
To emulate the nullptr, a new bool has been added (doesn't change
sizeof(KeyboardLayoutItem)).
Also replace a few more magic numbers by symbolic constants.
Change-Id: I7160f600faddd63deea265c89dc6fd857c7b557f
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
As an array of automatic storage duration, 'keyLayout' can never be nullptr,
so remove the respective check.
Change-Id: I2fb2db8311de55b41a1f9aef7c35341949e38e5a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Replace occurrences of a literal 9 that mean 'number of modifier key
combinations' with the new symbolic constant NumMods.
Change-Id: I1e78a1a3c00b81095450ec0557e30751da44c39a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This makes it a little bit easier for the reader to discover what
editable combo boxes are about.
Change-Id: I60ce571f01e32d4cacb4718b42a8e12884bd1c13
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This fixes several scaled constants on mac that are inherited from
commonstyle. (such as toolbutton arrows) It is probably easiest
to see when running Windows style on mac.
The problem was that the code assumed a default dpi of 96 would be
used on all platforms.
Change-Id: I83789589009b268dcb1d96629c3ec9e8f968a891
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The object is used, amongst other things, as a target for
sending style animation updates.
Change-Id: Ic210e7ae2111bc08b70331a3a2030a494919a06d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Platform implementation for QWindow::setWindowIcon() was missing from
Windows platform plugin.
Task-number: QTBUG-27175
Change-Id: I6807d1ded057b7788a9f2fa5b143e212a666029b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
If something had changed with the menu item before it had actually been
originally added to the native menu then this would crash when trying
to remove a null item from the native menu. This prevents that from
happening.
Change-Id: I8d78b5504759225364d5fd051a23c8d6dbd7d1eb
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Handle the non-toplevel child window case, where
QWindow has a parent NSView instead of a parent
NSWindow. QWindow geometry is then equivalent to
the frame geometry
Task-number: QTBUG-26972
Change-Id: Ie7cedb3ec1a564ce55b72e8269d4853962e073ce
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Still use it in qtestlib though because using qInstallMessageHandler
here would break all tests (still) using qInstallMsgHandler - Qt always
uses the new message handler if there's one, ignoring any message handler
installed through deprecated API.
Change-Id: I6fefefb315a2421425d2b7787e367fd348a33d83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If custom cursor was set before the window was created, it didn't
actually get set, and in some cases even caused a crash.
Fixed by making sure the cursor is correct when showing widget/window.
Task-number: QTBUG-27535
Change-Id: I3bc946a9c406c96af5b86869a3a54893f8980aba
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The basic idea is that the platform theme is now responsible for
providing the pixmaps for the given standard name, or any file or
directory. Then, the QStyle implementation should query the platform
theme for the pixmaps, and build the icons accordingly using
ThemeHint::IconPixmapSizes. Same thing for QFileIconProvider. This
also opens future support for getting platform dependent pixmaps in
QtQuick components.
Also includes the implementation for the Cocoa (QCocoaTheme) and
Windows (QWindowsTheme) platform plugins.
Task-number: QTBUG-27450
Change-Id: I4e8406585d970a9af481be10f6643cf0abbc38a3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
This makes it possible for styles like Fusion to draw tabbars different
when they have a frame.
Change-Id: I1bb21198c0c3caf44c757f6f39310bf2509054bf
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
QStyleAnimation handles style animations in a generic fashion by
sending StyleAnimationUpdate events back to the animation target
instead of calling QWidget::update() directly. This decouples style
animations from widgets and makes it possible to run style animations
for QQuickItems (ie. the desktop components).
The next step is to add "QObject* QStyleOption::target" and use that
everywhere instead of the widget pointer passed to various QStyle
methods.
Change-Id: Ib963c54872805fc3f0123ff922f82c9962a68b90
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Documentation has been updated, changes apply to Qt5 as well as Qt4.
Change-Id: I692869971bafffabbb9c323dc031f6d984c1adb9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The default symlink is not available on Windows, so the qplatformdefs.h
header is not available there. Instead we can bypass the symlink and
use the actual mkspec name directly.
Change-Id: I1d7e05f35c1ff56befab5bed307cb1755ade8377
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
I have found the following scenarios when the physical size can
appear to change even though you can't actually stretch your monitor:
1) VNC allows setting the resolution. Physical size will then be a
fraction of the physical size of the monitor on which you display the
VNC window.
2) When you rotate your display, the width and height are reversed.
3) MacOS X simulates a change in physical size when you change the
mode to one whose aspect ratio does not match your monitor, and also
when you use simulated HiDPI mode on a non-HiDPI monitor. While this
info is basically wrong, since we are now querying the OS for it, we
might as well make sure it is propagated all the way through to the
QScreen object's properties.
Also, make sure that when geometry changes on one screen, all the
siblings are informed of the change in virtual geometry. Also
simplified the signals (don't need separate ones to inform of
changes which are fundamentally related to each other and always
change together).
Change-Id: I6a98a1c203e24e8fbeef6e90999671e56dc0c655
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
gl2ext.h only defines GL_APIENTRY and not APIENTRY so we should use
this macro if it is available. Without it, code that uses
QOPENGLF_APIENTRY and QGLF_APIENTRY might experience compile errors
due to the differing signatures.
Task-number: QTBUG-27313
Change-Id: Id79d934825928d9913138edc6e8f1b00edc89a8d
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reverting change: Ia6bc9ae14d79a646e61bfc97652f9f5af90738b3
The previous change does not set the printer correctly. It looks
based on the tests that the correct printer is set, but in reality
the default printer is used (even though printerName() is returning
the printer set).
Updated taskQTBUG4497_reusePrinterOnDifferentFiles() test case
so that it generates PDF instead of PS. Testing the binary output
can't be guaranteed to work in this case.
Change-Id: Iee111f2c2dec84f86344a38816c21e191f5373ea
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Martin Smith
Giuseppe D'Angelo
Sean Harmer
Milian Wolff
Cyril Oblikov
Olivier Goffart
Richard Moe Gustavsen
Thiago Macieira
Albert Astals Cid
Tor Arne Vestbø
Richard Moore
J-P Nurmi
Frederik Gladhorn
Topi Reinio
Gabriel de Dietrich
Pavel Mogylevskiy
jian liang
Jędrzej Nowacki
Jan Arve Saether
Friedemann Kleint
aavit
Indrajit Tapadar
Andy Shaw
Simeon Bird
Laszlo Papp
Gunnar Sletta
Oliver Wolff
Sergio Martins
Shawn Rutledge
Michael Brasser
Jerome Pasion
Erik Verbruggen
Kevin Ottens
Morten Johan Sørvig
Samuel Rødal
Takumi ASAKI
Keith Gardner
Marcel Krems
Yoann Lopes
anknight
Andreas Aardal Hanssen
Tor Arne Vestbø
David E. Narváez
Christoph Schleifenbaum
Peter Hartmann
Fredrik Höglund
Israel Lins
Karim Pinter
Mark Brand
Josh Faust
Oswald Buddenhagen
Stephen Kelly
Jonas Gastal
Bjoern Breitmeyer
Caroline Chao
Oleg Shparber
Eskil Abrahamsen Blomfeldt
Thorbjørn Lund Martsum
Pasi Petäjäjärvi
Mitch Curtis
Jon Severinsson
BogDan Vatra
Kai Koehne
Montel Laurent
Erik van Pienbroek
José Dapena Paz
hjk
Daniel Teske
Christian Strømme
David Faure
David Faure
Sergio Ahumada
Paul Olav Tvete
Jerzy Kozera
Julien Brianceau
Jens Bache-Wiig
Aurélien Gâteau
Lorn Potter
Florian Behrens
Nils Jeisecke
Fabian Bumberger
Sze Howe Koh
Liang Qi
Poul Sysolyatin
Peter Kümmel
Nico Vertriest
Jean-Paul Delimat
Rick Stockton
Elvis Lee
Dmitry Shachnev
Gatis Paeglis
Roman Pasechnik
Allan Sandfeld Jensen
David Faure
Shane Kearns
Andrew den Exter
Volker Krause
Gerhard Gappmeier
Juan Luis Boya García
Ruslan Nigmatullin
Jeremy Nicholl
Weng Xuetian
Orgad Shaneh
Rafael Roquetto
José Millán Soto
Pekka Vuorela
Konrad Rosenbaum
Leena Miettinen
Debao Zhang
Konstantin Ritt
Giuseppe D'Angelo
Joerg Bornemann
Jonathan Liu
Bernd Weimer
Andreas Holzammer
Thorbjørn Lindeijer
Eskil Abrahamsen Blomfeldt
Venugopal Shivashankar
Miikka Heikkinen
Tasuku Suzuki
Michele Caini
Christiaan Janssen
Lars Knoll
mfekari
Leonard Lee
Jing Bai
Jiang Jiang
Denis Dzyubenko
Corentin Jabot
Christian Stenger
Vitaliy Kharin
Alejandro Exojo
Florian Hänel
Robert Loehning
Marc Mutz
Kevin Ottens
David Schulz
Andreas Aardal Hanssen
David Gil
Pierre Rossi
Teemu Katajisto
Zeno Albisser
Montel Laurent
Holger Ihrig
Kevin Krammer
Jocelyn Turcotte
mfekari
Eike Ziller
Thomas Hartmann
Michael Brüning
J-P Nurmi
Thomas Senyk
Michał Sawicz
John Layt
Sune Vuorela
Vadim Zakondyrin
Aaron McCarthy
Thiago A. Correa
Jon Trulson
Gabriel de Dietrich
Sergey Borovkov
Rafael Roquetto
Erik Verbruggen
Kevin Funk
Antti Harju
Yuchen Deng
Liang Qi
Uli Schlachter
Thomas McGuire
Harald Fernengel
Andrey Leonov
Jason Barron
Morten Johan Sorvig
Jan-Arve Saether
Sérgio Martins
Rohan McGovern
Tobias Hunger
Andreas Hartmetz
Oswald Buddenhagen
Kevin Krammer
Tero Ahola
Niels Weber
Shawn Rutledge
Titta Heikkala